Database Develop

Installed and Uninstalled "WeFI" and now my WiFi won't auto connect.

Hello Everyone.
I'm new to the forum and this is my first post, although have been reading and applying a lot of knowledge you guys have! the forum is great!
Anyway, I have an unlocked HTC TyTN II, everything worked fine and I overall very satisfied with the device...
I made a foolish thing! I installed the "Wefi" utility and after playing with it for a little while, I didn't like the thing.. so, I decided to uninstall it.. however, now I find that my kaiser cannot longer connect automatically to my wireless networks after resume.. Now I only get the notification that it has found available wireless networks and, even though I chose not to show the message anymore, it does it every time, and when it does not, the phone doesn't connect to my WiFi.. so I need to do it manually... which is very annoying..
I already restored original registry keys under HLM\Comm\TNETW12511\Parms with no luck so far...
What can I do?... I'm still on the original WM 6.0, have not loaded any ROM changes yet..
Your help would be highly appreciated.
Thanks!
Oscar

Fix for auto connect problem after removing WeFi
My name is Galia Finkelstein and I work at the support desk at WeFi. This doesn't happen anymore on the new version that's been released so for the older version we have a version fix for the problem with the automatic connection, just run this file and you should be good to go http://wefi.com/static/RestoreZCAutoConnect.exe
If I can assist with anything else please drop me a line at [email protected].

WeFi post-uninstall problems
Hi!
I am sufferring from the same problems as "obadillo" - see above.
I downloaded and installed the latest version of WeFi, but after a couple of days of use, I found that I didn't like it, and it also took up too much of my valuable "today" screen space.
After uninstalling, I found that firstly, all my previous wi-fi settings had been lost (WEP keys for my home network, my work network etc etc), and secondly, even after re-enterring these details, my device (HTC Touch UK Version - Orange UK) - (running WM6 Pro) refused to auto-connect when I switch the WiFi on.
After reading the reply from Galia (directly above my post), I downloaded and ran the executable, but found that it made no difference.
Any ideas anyone? I did email Wefi's support email address, but as yet have received no reply.
Thanks in advance!

I have also tried this fix with no success (running WM5). I have also sent an email to wefi support. No response. I would recommend you stay away from this software.

We-Fi Latest Version
I have found a (kind of) solution! I have installed the latest version of We-Fi (downloaded from their website), and then DEselected it in my Today programs. So even though its not in use, its wifi parameters still overrule the PPCs local params. This seems to allow me to switch on and off WiFi WITHOUT using the WeFi software, and it now autoconnects, even with the several wireless networks I have stored, whenever I switch WiFi on, it may take a few seconds to connect, but it now does every time.
Not the greatest "solution", but at least the problem is partially solved.
But as the good man above says, unless you're VERY sure you want to install WeFi, do not install, because you will lose ALL preexisiting WiFi connections and settings etc..
Have a good one!
-=namwollem=-

Hello again, XDA devs!
I also had the problem and I'm struggling with Amir, some guy from the WeFi staff, to get the problem solved or at least recognized.
I left a complete description on my blog with links to people having problems. Here's the article (without links):
Before you consider installing WeFi on your Windows Mobile device, you might want to read this cautiously and save yourself some problems.
If you have not yet tried it, you're not missing much. Although promising, the app takes over your device. It controls your today screen, messes up your wi-fi parameters and some rarer stability issues were also reported.
First, the app needs .Net CF v.2.0, something that takes space and puts more useless crap on your device. Then the app doesn't just find networks and connect to them. Instead it overrides your wi-fi parameters and inserts its own code, thus the uninstallation problems. WeFi also takes a lot of your today screen's estate for basically nothing. How much screen space? Take a look.
Upon uninstalling it, many noticed their devices stopped automatically connecting to wireless networks, among other, rarer problems. The only known fix to the problem is to hard-reset your device and to stay the **** away from this app. We also saw a link to a .exe file somewhere but no one left feedback about it so we assume it's just as good as WeFi. You might also reinstall it, hide it and use it to take care of the wi-fi stuff or go in Settings>Connections>Wi-Fi everytime to select a network to connect to.
The developers were quick to comment about the problem and said they are working on it (see the first comment to this post). However their product page doesn't mention the problem yet and people still get caught. I left them feedback about *some* of the concerned device, assuming it's not all of them, hoping for a change. Feel free to do the same and put some pressure on these guys too.
You might also read one of those threads and see for yourself.
-Nico
Click to expand...
Click to collapse
Full article: http://nicbou.com/2008/07/09/do-not-install…-you-pocket-pcdo-not-install-wefi-on-you-pocket-pc/
I'm trying to get the warning to reach all the download spots, if you guys feel like helping. This is just unacceptable, let's do something about it!

Haim head of WeFi Windows Mobile development team here
Hello all,
First, let me assure you all that we are doing our best to solve any user problem as quickly as possible.
Out of the thousands of mobile users we have, there are really only a few users who complained about this problem.
We released a fix that you can find in: http://www.wefi.com/download/client/RestoreZCAutoConnect.exe
which after executing and doing soft reset should solve the problem.
As our support team explained to “primemaps” via e-mails (sent in 08/07) this fix only works if you uninstall WeFi first.
What you are all describing is that ZeroConfig stopped auto connecting.
By avoiding the manipulation of ZeroConfig default timeouts in our next version (which should be released in about 2 weeks from now), this should not happen anymore.
If this does not help you or you have encountered any other problem – please send me an email to [email protected] and I promise a fast response,
it would help if you mentioned your WeFi version, Device model and ActiveSync version.
I hope you would all choose to install our next version and enjoy the many benefits it can bring you.
Haim

Can't work with it and can't work without it
With my HTC TyTN II I had similar problems as others have described, or maybe even worse: I could no longer work to any wireless networks. It would disconnect in less than one second every time.
I did a hard reset and that didn't work!
I also tried the "fix" the WeFi representative suggested but that didn't help at all either.
What finally helped me was Namwollem's solution: Install WeFi again and removed it from the Today screen (but kept it installed).
I can't help wonder if WeFi changes something in the ROM since a hard reset didn't even fix it.
One of these days I will have to install the ROM all over and see if it makes a difference, but I wish I could avoid that!
I hope others won't be stupid like me and install this #$%[email protected]#&$ software!

Nothing helps for my Diamond to restore Wifi signal
I have Htc diamond with newest Rom downloaded from htc.com.
My problem is that since i installed aplication WEFI(older version) and uninstalled it, i cannot see ANY available wifi networks.. I tried alot of things. I tried soft reset, hard reset, i installed WEFI (newest version) , in moments wifi works and shows available networks and i can connect, but after it doesnt work again.. I would say it shows networks only ocasionally(even if im always surrounded by at least 10 hotspots). I installed newest Rom again, i installed old official ROM, i always put mamximum performance instead of battery, and still i have no results/cannot see ANY available networks). I have a feeling like i really have a hardware problem with wifi now..But again i think whatever it is its caused by this aplication WEFI. Does anylone have any ideas? i saw some Rafael radio ROM , maybe i can try to install that?
Thanks

AArrrggghh!
This god-awful program rears its ugly head again! I have solved the problem totally now by getting a new handset!! Now I have my Touch HD (Blackstone), one thing I WILL NOT do is install this garbage!! A quick search thru the forums here will reveal a small and very useful program which will with one click switch-on WiFi (and auto connect to the signal it finds if stored in your preferred networks) and with another click will switch WiFi off! Its called AKWifiToggle, and while no where near as fancy as WeFi, IT WORKS and DOESN'T MUCK UP YOUR PHONE!!!

[Q] "New Connection Setup database found. Do you want to install it"

About once every minute I receive a message on my screen saying “ New Connection Setup database found. Do you want to install it?”
I push yes and it downloads about 14% stops and says server error.
My question is what to do with this? How do I disable?
Thanks for the help!!!
Mod Edit MDAIIIUser
Changed the title to reflect the problem

think i found it
http://forum.xda-developers.com/showthread.php?t=339066
Update... This wont work on the Touch HD. Any ideas??

kevinniven said:
http://forum.xda-developers.com/showthread.php?t=339066
Update... This wont work on the Touch HD. Any ideas??
Click to expand...
Click to collapse
I have exactly the same problem. Been driving me nuts Whatever I do, whether I am on HSDPA or WIFI connection, it never gets further than 66% (that's the max I ever obtained) - I've tried at least 20 times and would really like to know if there's a way to get rid of this thing. I tried disabling the auto configuration, but I can confirm (as per above) that this does not work on the Touch HD.
Naturally, HTC refers you to Microsoft. I haven't contacted Microsoft because I thought I'd first find out where this comes from.
Any ideas/tips/solutions!???????????
Thanks!

This thing also bugging me alot...disabling the auto configuration doesn't work...May be some know any tweak for that...

I happened to me. I managed to download the database connecting the phone to a desktop with DSL connection. It installed something (I don't know what) and since then I don't have the messages anymore.

kevinniven said:
About once every minute I receive a message on my screen saying “ New Connection Setup database found. Do you want to install it?”
I push yes and it downloads about 14% stops and says server error.
My question is what to do with this? How do I disable?
Thanks for the help!!!
Mod Edit MDAIIIUser
Changed the title to reflect the problem
Click to expand...
Click to collapse
Please have a look at this thread: http://forum.xda-developers.com/showthread.php?t=453383
This is being discussed there, maybe some posts can help you.
Regards
K_Hismoom

So far there's no working solution for this. Some people have managed to download the database, the phone rebooted itself (keep this in mind, because you'll lose any open and unsaved data) and a new connection rom version now shows up, without any visible impact.
But most of the people just cant download the whole database (me included). Seems to be related to the fact that many people are trying to download at the same time. Maybe try doing it at some wicked hours when the load is lower.

Rozenthal said:
... Some people have managed to download the database, the phone rebooted itself (keep this in mind, because you'll lose any open and unsaved data) and a new connection rom version now shows up, without any visible impact.
But most of the people just cant download the whole database (me included). Seems to be related to the fact that many people are trying to download at the same time. Maybe try doing it at some wicked hours when the load is lower.
Click to expand...
Click to collapse
yes, that's true.... I got also the same problem, but fortunately I was wide awake at 5 a.m. and my HD manage to finish complete database download, after which phone auto rebooted and now there is no more message “ New Connection Setup database found. Do you want to install it?”.
after this update I didn't notice any significantly changes ....

Everyone connect the phone to activesync using a pc that has internet connection and then press update on the phone. It will use your pcs internet to download it and it will go successfull.
I tried to download with my HSDPA and my WIFI but no luck. As soon as connected on activesync it started to download and finished 100%

[Q] Turning on... Error Turning on... Error WIFI bug

Hello guys,
I have wiped my phone, and tried many, many roms, mostly Darky and Docs roms over the last year, and ALL of them have this wifi bug where sometimes my phone connects to a wifi, and other times I have to restart my phone and only then will it connect.
When it does not connect it says Turning on.... then says Error. I press again, it says Turning on again etc. Occasionally it connects eventually after I try again and again, but usually I have to restart the phone first.
Does anyone know why this is and what to do to fix it. It is very frustrating, especially when in front of an iphone fundementalist.
Help much appreciated!
tx
Mark.

i have this same problem
a fix would be so nice.

try different router.
if you have tried different Rom and kernel then it can't be that.
only your router or phone is bad.
**DamianGTO Steam kernel. 350MB Ram. 500HZ. all ext2. Steam Rom. Js5**

i find this problem is app specific. if i connect before anything is open its fine. if i open a 3rd party browser in edge data mode then switch to wifi while loading a page this error occurs sometimes. tested with 3 different routers and one sgs phone dxjpe modem

alexanderct said:
i find this problem is app specific. if i connect before anything is open its fine. if i open a 3rd party browser in edge data mode then switch to wifi while loading a page this error occurs sometimes. tested with 3 different routers and one sgs phone dxjpe modem
Click to expand...
Click to collapse
maby its the modem. never seen this before..
**DamianGTO Ultimate kernel. 350MB Ram. 600HZ. all ext2. Steam Rom. Js5**

I get the error too. The only fix I found was to enter flight mode and then turn on wireless and then exit flight mode.
Sent from my GT-I9000 using XDA App

icejagans said:
I get the error too. The only fix I found was to enter flight mode and then turn on wireless and then exit flight mode.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
AAH I will try that!
It is not the router, I have the issue on every router I have tried. Ive also verified that Static IP and Dynamic makes NO difference at all to this problem.
I'll report back on the flight mode work-around... a lot faster than rebooting, cheers,
Mark.

Anyone know a fix for this bug?
Gad, at times like this I envy my wife's iphone, which JUST WORKS. My SGS has been spared me smashing it to bits out of frustration on several occasions...
I tried the flight mode suggestion, it does not work. The only thing that works is restarting the phone... which takes ages and Launcherpro has to be forced shut then restarted, media scanned etc etc... and only THEN can I try the wifi again, so its not a viable work-around.
Anything else to try ?
tx
Mark.
icejagans said:
I get the error too. The only fix I found was to enter flight mode and then turn on wireless and then exit flight mode.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse

hey guys i think im having the same problem.... i got my sgs and upgraded it to stock 2.2... had the problem then even... it connevts to the router fine... but then after like 10 mins its still connected it says but no data is being transferred... doesnt open webpages etc etc...
then i upgraded to darkys 9.2... and im having the exact same problem... only when i restart the phone the wifi works again for a while... then same problem... wifi is connected but it just doesnt transfer any data.... its reallly frikin frustrating having to reboot over and over and wait for everything to load up like someone else posted i think....
apparently there is some allshare thing thats supposed to help but i think thats a diff problem altogether cuz thats for wifi not connecting at all i think... her wifi does connect but no data...
someone needs to fix this issue somehow :S

DrunkFuX666 said:
hey guys i think im having the same problem.... i got my sgs and upgraded it to stock 2.2... had the problem then even... it connevts to the router fine... but then after like 10 mins its still connected it says but no data is being transferred... doesnt open webpages etc etc...
then i upgraded to darkys 9.2... and im having the exact same problem... only when i restart the phone the wifi works again for a while...
Click to expand...
Click to collapse
Hi
Darkys alternative wifi does not fix the problem. But my problem is not exactly like yours, my phone generally stays connected when it connects, where your connection stops working. Mine only becomes impossible to connect without rebooting sometimes. Occasionally it seems switching from STATIC to DYNAMIC or DYNAMIC to STATIC IP jiggs the phone's wifi somehow, and it then works, but often it just says Turning on... and nada!
Yep, a fix is desperately needed.
Mark

Hello
Having the same problem here. But let's just clarify. At least for me, and from the OP's description, the problem is NOT wifi not being able to connect. It is Wifi NOT TURNING ON at all. Takes a LOONG while with "turning on" and then "error" appears. Sometimes trying over and over again will fix it. Sometimes a full reboot, which as someone stated, is a royal pain.

Get this quite frequently. Doesn't bother me too much because it always works after the second time I turn it on (in the settings not in notifications) when it shows "Error".

Couple of things you could try:
Turn off Notifications under WiFi settings
Turn off Use Wireless Networks under Location & Security settings
My Wifi became a bit stable after this.
You could also try static ip addresses.

Had it happen last night. Went into task manager, killed everything that uses internet and retried it. It turned on immediately. Will test more to see if this is indeed a fix. It's still annoying enough, though.

bump
I have this problem for over 6 months. Any fixes anyone????
Maybe its a harware bug. I may take it into a Samsung Store

This still happens to me too...any fix? Is this hardware or something?

Had this issue when I was using SuperPower App where it takes control of the Wifi sleep. Removed it and never had it again. Any one of you using some sort of battery saver taking control of WIFI?

Same problem here
Same problem here on stock 2.2.1 ROM. Like others already mentioned, my problem is getting the WiFi to turn on. Once it is on, it's problem free, but turning it on sometimes takes minutes to only get an error. Mostly trying again, turns it on quickly. But this afternoon I tried three times without succes. Than, after reading a lot of forum discussions on this problem (we are not alone...), I tried turning off packet data and then WiFi turned on in seconds. This suggests that apps having an internet connection open could cause the problem. It also suggests that icejagans is right by stating to turn the phone into flight mode might resolve the problem. I am not running any battery saver, task killer or whatsoever that could cause this problem. Last Saturday I even did a factory reset to see if that helped, but no, it didn't... Getting really annoyed by this problem and I hope 2.3 will fix it!

Bumb!
Please does anyone have a fix for this? Does flashing a different modem help?

When this happens, I go to Allshare app and enable wireless (when asked), it always works

Huge loss of internet connection after ICS update

Hi All,
I'm in the UK and have a US version P7310 wifi only (Samsung refurb bought off ebay)
Up until the ICS update 3 days ago it was in my opinion an awesome piece of kit
however, since the update, my wifi connection (or data transfer) is down at least 70% to what it was on HC 3.2
I am NOT losing the connection to the router, it is the data transfer that is down!
Many times I get the page is not available try later link might be down or if the page does load most of the data many images do not!
Repeated refreshes seem to have no affect! It was super fast before the update!
I have rebooted and still nothing, so I feel it is an issue in the tab rather than any other kit I have at the moment?
I have a wifi laptop and other android device and they perform as before on wifi so it's not the router!
I have also put the tab next to the router and it has made no difference!
I have searched the settings in the tab for anything obvious like load images or choke the bandwidth or whatever
and have turned many things on and off without success! I use the standard browser and the dolphin browser and both
act the same!
The tab has never been routed, it came with HC3.1 then I updated over the air to HC3.2 and then to ICS4.04
I know there is a folder for wifi in the settings and wondered if there was anything I could change to see if it improves anything?
Or has anyone else found their wifi is poor?
The 70% was accurate, not exaggeration, so much so that the tab is unusable for me like this!
I know it is early days for the ICS and the 8.9 world but would REALLY appreciate some advice for things to try please?
Kind regards
PS loved the noob video
Is it possible to go back to 3.2? I I restore factory settings it shall go to 3.1 and I assume 4.04? Would it go to 3.2 first?

Hmm...
Well, the support thread for the official ICS update has no mention of such issues.
Doing a factory reset will only reset the current ICS 4.0.4 to its default settings and will not revert the tablet to Honeycomb 3.1 or 3.2.
To downgrade, you should attempt through Kies, though I am not sure it offers the feature.
What I am certain of is that you can downgrade to 3.2 fairly easily by manually flashing a 3.2 firmware release.
You can download an official Honeycomb 3.2 United Kingdom release for the P7310 HERE
If you have no idea how to flash it through ODIN, please download this .zip archive that holds all the necessary tools. Then refer to THIS thread (where the archive came from) and read the short instructions on using ODIN in the How-to Section, last topic named "Using ODIN 1.85".
If you proceed to downgrade, consider to load the provided .pit file in ODIN 1.85's folder and checking "Repartition" in the program. Clicking Start with the .pit file loaded will wipe all data from your device, including everything that resides on the SD card.
After successfully downgrading to Honeycomb 3.2, you can attempt the ICS upgrade once again, but make sure to execute a factory reset from within Honeycomb's settings (or through recovery mode) on your device, before doing the update.
If the Wi-Fi issues continue within ICS, I am afraid I am short of knowledge to help track down the issue.
Good luck.

Solution?
Hi.
Maybe this will work for you: http://forum.xda-developers.com/showthread.php?t=1846766

strange
I doubt this is related to the 5ghz issue (that has different symptoms = not being able to connect).
Did you go to ICS using Odin, Kies or OTA?
Have you tried flashing the Stock ICS through Odin?
Have you tried doing a full data wipe? (reset to Stock)?
If you need to keep your app data, then save it with something like Titanium Backup (or make a Nandroid backup so you can return to current state, after experimenting)
What is your router? anything "exotic" about your WLAN settings?

fred_be9300 said:
I doubt this is related to the 5ghz issue (that has different symptoms = not being able to connect).
Click to expand...
Click to collapse
Not different symptoms. Equal symptoms. nakedninja42 was referring to the 5GHz band in his post,
[Guide] Enable Wifi 5GHz Stock ICS: I noticed that I could not connect to 5GHz after updating to stock ICS.
Click to expand...
Click to collapse
but did not say that he couldn't connect at all. And thus it makes sense to try it. Especially since Bananajet writes
that he doesn't lose connection - only speed (transfer).

Connection
Gentlemen,
thank you for your concise replies! To answer the points I think worth noting!
I downloaded OTA using the tabs own system (the 300mb file) it updated ok!
I did notice that I had to download 3 times as each previous one did fully download but didnt do anything!
On these downloads, I did not have the charger plugged in but had approximately 75+% of battery!
When I did do it the third time with charger plugged in, it updated as you would expect!
Strangely the tab has improved today and I would say 95% of clicks to a website or a refresh have performed as usual!
However (using dolphin browser) with one site open and a new tab for another, it would again not load all the images on the second page
but did NOT give me the page down link like the day before!
I would say it was a bad day for my wifi BUT the other bits of kit I use ALL performed as usual when the tab didnt
so I am still unsure of the problem? I did consider that the other bits of kit (nokia phone, Android Phone and a Laptop)
although NOT actively connecting to anything to download except being on whatsapp might be bullying the tab out
but I tried turning them off and it didnt change anything!
So I think I shall watch what happens and report back and see if anyone else mentions poor transfers?
By this I mean I REMAIN connected to the router and im NOT sure of the actual transfer rates BUT its like
the connection stops half way when the page loads (link down or photos half loaded) and no amount of refresh makes them reload
until such a time (usually 5 mins) that it does! This then does NOT start working normally (fast loading) but usually repeats itself
and doesnt load again! I do feel that any sites with mainly text and mininal graphics did load ok giving the impression
of a burst of power and then giving up hallf way if there was too much to load (my words, not one from a tech manual haha)
So just to say, the tab is working much better but not perfect! Shall report again when have more hours online!
Thank you again for your help
Kind regards
Bananajet

Update
Gentlemen (and any ladies)
after a few weeks using ICS 4 here are my findings! If anyone can help I would be very grateful as right now, the frustration doesnt compare!
I also realise my original title was slightly misleading, please note I NEVER lose connection to the router, it is the data that seems to
be choked! Almost like the tab only allows a bit through at a time and if there is a load to come through (images or streaming television), it chokes it and very little gets through? Interesting though I dont seem to have any issues wastching youtube much!
To recap, p7310 8.9 wifi version which was a refurb from the US direct from Samsung! Im in the UK! Originally came with HC3.1
I downloaded 3.2 straight away and have done nothing to this machine to alter what came out of the box!
I was very very happy with it and 3.2! Of course, as everyone else, was excited to get ICS 4.04
Downloaded ICS OTA with the update on the tab
I have noticed nothing for my type of usage much difference in ICS apart from possibly better battery but battery was ok anyway!
Back to my problem!
Web pages which contain any amount of thumbnails which might change (alter their positon on the page) when requested as a new page or refreshed very rarely load all of the images! It might load about 5-10% of them when the problem exists which is about 75% of the time! Also streaming live television is very poor to connect although when connected, it works perfectly!
On 3.2 even in my garden I could load web pages that were graphic intensive (nothing extreme, just were there might be mulitple thumbnails etc)
they would load as quick as you would want, reloads, new pages, browsing etc all worked perfectly and streaming television too!
I use the stock browser and one called dolphin
On ICS I would say about 75% of the time, any pages as mentioned above do not load all of the images, only probably about 10% of the images would load, the reast would have place marks showing where the other images should go! It would then stop! Any amount of recycle does not improve it until such time (can be a minute, can be 5 minutes)! The other 25% it works basically as it should, quite fast and normal!
One other issue is IF it is working correctly and I try and load a new tab or page in the background then the new page is highly unlikey to load correctly with any images it might want to display! Like "You cant have both mate" haha
On 3.2 any streaming video or television was perfect, fast and never failed! On ICS it has a 80% failure first time and requires usually 3-4 recyles to 'hook it'! Once it is in, it stays in and works well! If I try and change channel or view something else, it reverts to failure again!
I have changed no settings on router, changed nothing about anything! All other items in the house that might use wifi still perform as before!
The change in the quality happend immediately after ICS download.
This issue has left what was a fantastic bit of kit very frustrating to use and almost unusable!
I would really like to go back to 3.2 if I can but am unsure how easy this is although I do understand that was mentioned in an earlier post
I cannot try the 5ghz method as it is not rooted and to be honest, I am in the UK and that issue is regarding the US networks! My ccode says GB and not ALL btw.
To summarise, it seems that any new or data that requires a lot of refreshing rather than drawing from a cache doesnt want to load?
Any advice would be very helpful,
thank you all again.
Bananajet

Perhaps to do with the wifi channel used by router? Try to use channel 1 (or 6 or 11, avoid higher)
Try an app that gives WiFi diagnostics, like WiFi Analyzer.
Alternatively, reflash any other stock HC or ICS Rom through Odin... You might lose data (downloaded apps, settings, ...) along the way though (not sure, depends on exact approach, etc)

Have you try to test the speed connection wit your tab? I try whit speedtest.net in that site you can find the version for mobile, download it and try, just to see if it is a problem related whit your browser or with you wifi drivers
hope it could help
PS. you can find the app in play store too (same name)

[Q] WiFi Tether Won't Work (even with correct settings)?

I'm running OMJ's ROM and using WiFi Tether TrevE Mod "Version 3.2-beta-modv5-***Synergized***"
Okay so even with the settings that everyone recommends for the HTCone, and a few modifications, I still cannot get the blasted thing to work.
Settings I've tried:
Profile: Generic ICS/JB(wlan0)
Setup-Method: Auto
Encryption ON (p/w is the correct format AFAIK, about 12 lowercase letters no numbers, similar to the default)
Changed SSID to "HTCone" no spaces
Wifi Driver Reload (1) checked
MSS Clamping checked
Routing Fix checked
With those settings, I can't even get it to broadcast. It says it's running but no devices can find it. It simply isn't there.
If I disable Wifi Driver Reload (1) it begins broadcasting. However, when I attempt to connect, the second device just sits there at "Obtaining IP Address..." for about 90 seconds then retries and gets stuck at "Authenticating" then back. An endless loop never resulting in a connection.
The most frustrating thing about this is that it was JUST working the day before. I didn't touch ANYTHING and it just decided to take a dump.
Addendum: I was looking at the notes in the bottom of the ABOUT screen and I noticed the updates are quite old. Is it possible I have an old version that doesn't work with the HTC One? I got it from QBKING77's website.

Happened to me and don't have an answer. I wiped and didn't restore anything to resolve it. Restoring data broke it again.
Sent from my HTCONE using xda app-developers app

I followed this guide that worked for my Note II and I have no problems. I'm typing this message from my laptop tethered to my ONE. I have WiFi-driver reload 2 checked.

gk1984 said:
Happened to me and don't have an answer. I wiped and didn't restore anything to resolve it. Restoring data broke it again.
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
klbjr said:
I followed this guide that worked for my Note II and I have no problems. I'm typing this message from my laptop tethered to my ONE. I have WiFi-driver reload 2 checked.
Click to expand...
Click to collapse
I had no luck wiping the phone and re-installing the ROM. It was still FUBAR after the fresh flash of OMJ. What drives me NUTS about that is the fact that it was JUST working not 12hrs before it stopped working.
To give some more information as to the issue, it appears that checking either one (or both) of the Force Driver options causes it to not broadcast at all. If either of those two are checked, the hotspot isn't even visible to any device. If left unchecked, the hotspot becomes visible. However, upon trying to connect to the hotspot, it gets stuck in a loop of "Authenticating..." then "Obtaining IP address" which never results in a connection.
I've tried the options listed in that guide you posted, but to no avail.
So, at this point, I'm wondering if it's just because I'm using an outdated WiFi hotspot app. If anyone has one that's been updated since a little under a year ago, I'd appreciate a link. Thanks!

wolfbuck22 said:
I had no luck wiping the phone and re-installing the ROM. It was still FUBAR after the fresh flash of OMJ. What drives me NUTS about that is the fact that it was JUST working not 12hrs before it stopped working.
To give some more information as to the issue, it appears that checking either one (or both) of the Force Driver options causes it to not broadcast at all. If either of those two are checked, the hotspot isn't even visible to any device. If left unchecked, the hotspot becomes visible. However, upon trying to connect to the hotspot, it gets stuck in a loop of "Authenticating..." then "Obtaining IP address" which never results in a connection.
I've tried the options listed in that guide you posted, but to no avail.
So, at this point, I'm wondering if it's just because I'm using an outdated WiFi hotspot app. If anyone has one that's been updated since a little under a year ago, I'd appreciate a link. Thanks!
Click to expand...
Click to collapse
Not sure which one you are using but I'm using the one right from the Play Store v3.3 beta 2. You can also get it from here. I just went back to SWG 1.18 from a 4.2.2 ROM and reinstalled and all is good. Everything connects just fine using those settings from the link I posted earlier.

klbjr said:
Not sure which one you are using but I'm using the one right from the Play Store v3.3 beta 2. You can also get it from here. I just went back to SWG 1.18 from a 4.2.2 ROM and reinstalled and all is good. Everything connects just fine using those settings from the link I posted earlier.
Click to expand...
Click to collapse
In the first post I listed which version I was using. Unfortunately, even the newest version fails to work. I don't get this. Maybe it has something to do with the OMJ ROM and how close to stock it is. Perhaps I should try a different ROM.
This is a far cry from the CM7 ROM I had on my EVO which allowed me to tether perfectly all the time without the hassle. Maybe I'll try CM again on my One.

I'm gonna download & flash OMJ's ROM & see if I can recreate it. You running the latest version right?
Sent from my HTCONE using Tapatalk 4

klbjr said:
I'm gonna download & flash OMJ's ROM & see if I can recreate it. You running the latest version right?
Sent from my HTCONE using Tapatalk 4
Click to expand...
Click to collapse
There was some kind of minor update that just came through. Not sure what it was. I haven't installed it yet. My version is current as of a week ago.

wolfbuck22 said:
There was some kind of minor update that just came through. Not sure what it was. I haven't installed it yet. My version is current as of a week ago.
Click to expand...
Click to collapse
Sorry. I downloaded the latest yesterday but was playing around with flex's & hawk's 4.2.2 ports. I'm about to flash in a couple mins and will post my results.

Similar issue here
I'm having issues with wifi tether on my HTC One, as well. I can tell you that if you set the Device-Profile to "Auto," it will create an ad-hoc connection that my Windows 7/Ubuntu Studio desktop will recognize. Ubuntu recognizes it as a regular wifi hotspot, and connects automatically. Windows recognizes it as an ad-hoc connection, and I have to connect manually. My Samsung Galaxy Tab 3 does not see the connection at all, and neither does my LG Blu-Ray player. If I change the profile to Generic ICS/JB (wlan 1), then other devices see the connection, and will even attempt to connect to it, but there is never a successful connection with internet access. If I choose Generic ICS/JB (wlan 0), then nothing sees it as a viable connection. I am running the stock sense ROM, and have done no updates (so I'm still at JB 4.1). I can tell you that wifi tether errors frequently for me, and I have to reboot quite a lot. If I leave my phone broadcasting overnight, then in the morning wifi tether thinks that I don't have root, and gives me the "your phone is in an unknown state" error message; at that point, the only way to stop the wifi is to reboot.
So, I can make it work, for a limited number of devices. I would like to use it as a wifi connection for my tablet and my Blu-Ray player, however. I have searched quite a bit to try to figure this out, and I haven't been able to find a reliable answer. Any help would be appreciated. Thank you.

I got mine to work. Can surf the web, check email, etc. now the damn thing will not stream video. I am connected to 4g and speed test on my ipad verify it but won't stream. Pisses me off.

wolfbuck22 said:
I'm running OMJ's ROM and using WiFi Tether TrevE Mod "Version 3.2-beta-modv5-***Synergized***"
Okay so even with the settings that everyone recommends for the HTCone, and a few modifications, I still cannot get the blasted thing to work.
Settings I've tried:
Profile: Generic ICS/JB(wlan0)
Setup-Method: Auto
Encryption ON (p/w is the correct format AFAIK, about 12 lowercase letters no numbers, similar to the default)
Changed SSID to "HTCone" no spaces
Wifi Driver Reload (1) checked
MSS Clamping checked
Routing Fix checked
With those settings, I can't even get it to broadcast. It says it's running but no devices can find it. It simply isn't there.
If I disable Wifi Driver Reload (1) it begins broadcasting. However, when I attempt to connect, the second device just sits there at "Obtaining IP Address..." for about 90 seconds then retries and gets stuck at "Authenticating" then back. An endless loop never resulting in a connection.
The most frustrating thing about this is that it was JUST working the day before. I didn't touch ANYTHING and it just decided to take a dump.
Addendum: I was looking at the notes in the bottom of the ABOUT screen and I noticed the updates are quite old. Is it possible I have an old version that doesn't work with the HTC One? I got it from QBKING77's website.
Click to expand...
Click to collapse
Try to go to advanced settings at the upper right portion of the settings. Then click LAN Settings > Reset to default settings. I have the same problem with you. I've tried it and it worked.