Related
Can anyone recommend a suction cup mount that I can use in the car? It doesn't have to be made specifically for the MyTouch, I just want to be able to see the navigation while i drive instead of constantly looking down at my cup holder.
I'm in the market for one too. I would like to buy it as a christmas gift for my Boss.
doalittledanse said:
Can anyone recommend a suction cup mount that I can use in the car? It doesn't have to be made specifically for the MyTouch, I just want to be able to see the navigation while i drive instead of constantly looking down at my cup holder.
Click to expand...
Click to collapse
i third this!
I am using this one here:
http://www.amazon.com/Holder-T-Mobi..._1_3?ie=UTF8&s=wireless&qid=1259151227&sr=8-3
It gets the job done. The suction works just fine, have had no instances of it coming off, and my phone has never come out of the mount. The only thing is, be careful with the ratcheting mechanism... when I first got mine I forced it a bit hard without pressing in the release button, and now it doesn't always stay centered and skips teeth sometimes but still works.
It has an open space in the center of the bottom so you can still connect power/audio. It holds the phone well, has rubbery foam on the side arms to grip the phone. For $10 its worth it, IMHO.
Head over to your local large electronics retailer (Best Buy, Future Shop, Radio Shacketc) and look in the GPS and IPhone sections. I bet you could also order it through Amazon.
I have seen the same mount under multiple brand names there. It is around $30 in Canada, so figure $20sh in the US. The one I have is called the "Grip-iT" by Scosche. Allows the phone to be held vertically and horizontally, has a longer flexible neck to position it and a really strong suction cup mount. Also comes with an adhesive mount disk if you have to mount it that way (some places don't allow windshield mounts).
I use it mostly in a fullsized pickup with a stiff suspension and have had no problems with it coming loose.
The one I have is this one:
http://www.scosche.com/products/sfID1/337/sfID2/344/productID/1593
I would stay away from this one as it is a PITA (at least in my GMC truck, which has fairly standard air vents) to mount:
http://www.scosche.com/products/sfID1/210/sfID2/337/productID/1594
What ever you do don't buy the cheap Bell brand mp3/pda window mount kit. They are usually found in the discount stores like Wal-Mart, K-mart, etc. The clamp swivel is loose, it can't keep the phone up at a pleasant viewing angle. If you hit a good bump the phone shoots out from the poor grip and the clamp closing by the pressure of the spring. Ugh, pure garbage and a great way to get in a car accident.
Off both of what you guys found and use, are they universal?? Meaning as in, can I swap my sapphire with my g1 or other devices. I guess I should just be asking if the width is very adjustable and or can you change the angle from portrait to landscape easily?? Thanks guys. Just doing my research before I ask for one for x-mas
I have been using this one for a few weeks now.. It's actually very sturdy and becuase its made specifically for our phones, it looks sooo much better and very smooth compared to the other universal ones.
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=170391719566&ssPageName=STRK:MEWNX:IT
When you order, keep in mind it's coming from china..it took around 3 weeks to receive but well worth the wait.
It's sticks to the windshield like a champ and will not budge unless you use the release tab. Highley recommended for nav pruposes.
stillriza said:
I have been using this one for a few weeks now.. It's actually very sturdy and becuase its made specifically for our phones, it looks sooo much better and very smooth compared to the other universal ones.
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=170391719566&ssPageName=STRK:MEWNX:IT
When you order, keep in mind it's coming from china..it took around 3 weeks to receive but well worth the wait.
It's sticks to the windshield like a champ and will not budge unless you use the release tab. Highley recommended for nav pruposes.
Click to expand...
Click to collapse
Thanks. That one looks pretty good. Just ordered it.
Awesome find... I just ordered one too. Thanks!
It's amazing! Best custom mount I've owned. And the clip that holds the phone is also a removable belt clip. There's a punch out for the camera, been driving around with layar turned on. It is win.
Sent from my ADR6300 using XDA App
link?
10 chars etc
I haven't seen it online yet, only in a store so far. Ill post pix later.
Sent from my ADR6300 using XDA App
Is it any different than this one?
http://amzn.com/B003LEGZGK
AFAIK, this is the only custom mount of ANY KIND for the Incredible produced by HTC, which drives me crazy.
tdiman said:
Is it any different than this one?
http://amzn.com/B003LEGZGK
AFAIK, this is the only custom mount of ANY KIND for the Incredible produced by HTC, which drives me crazy.
Click to expand...
Click to collapse
There are two versions available from the Verizon store. The one you linked to and one other. They both have one big issue. If you already have a protector for your phone that you like, it will not work unless you take your protector off. The one you linked to has one other issue, it uses double sided tape to mount. The other one I looked at had a suction mount, but as I said, it will not let you put your phone on it unless you remove any protector you are using.
the one linked is the one i'm talking about. i haven't found it on the VZW website anywhere, didn't think to look anywhere else. i don't use a case or anything full time, i ordered an otterbox for when i'm working to wear on my belt, but when i'm not i just throw the phone in my pocket and run. i wish seidio came out with a car mount like this that worked with one of their cases, that would be epic. i'm sure with a dremel tool you could make it work if you were so inclined.
I have this one
I bought this with my incredible when I first got it. before 30 days was up the clip broke. I took it back and got it replaced. Then a couple of weeks later the new one broke in a different place. I hadn't even taken the new one off the car mount and worn it on my belt. I ended up cutting off the clip and gluing the clip to the mount so that it became a car mount only.
dltccf said:
I bought this with my incredible when I first got it. before 30 days was up the clip broke. I took it back and got it replaced. Then a couple of weeks later the new one broke in a different place. I hadn't even taken the new one off the car mount and worn it on my belt. I ended up cutting off the clip and gluing the clip to the mount so that it became a car mount only.
Click to expand...
Click to collapse
where did it break?
i'm wondering if there's a way i can use another company's clip and case without having to remove it. thinking of getting the seidio innocase and clip or something like that, maybe just cut the little tab off of the car mount clip and using that on whatever one i end up getting.
I don't want or use the belt clip, just adds another point of movement to the system. There's no happy medium with adjustments, you either get it where you want it and tighten it down to no flexibility, or it is way too loose. Due to the way the suction cup is engineered, the act of placing the phone or removing it from the clip torques the suction, causing it to fall off all the time. Was not at all impressed.
I have this mount I just pictured. I find it reliable. I do not use the belt clip.. I always leave that on the mount.
I have never used phone cases on any of my cell phones for 12 yrs.. I only have a screen protector..
Dinc goes in my phone pocket. My designated pocket only for my phone.. Not change or car keys..
Carefull
I have one of these.. or I should say I've had 2 of these. First one broke after about 8 seconds of being up and I tried to rotate the phone, and the hing that holds the clip on snapped.
Took it back to Verizon they swapped it out... had the second one a month or so and went to remove the phone and clip from the stand... and the plastic washer that holds the clip to the mount broke.... I now have it zip tied and it works great.
I was not rough with it, its just very fragile. Otherwise a good mount.
I've had 2 and the first one broke within a week. The clip that hooks into the mount broke and wouldn't mount. The second one I had for a few days before it broke. The one the hinge went. I didn't bother trying to replace it again. They did swap it out, but if two break that quickly, I figure I'll just keep having the same problems.....
Add me to the "it's too darn fragile" camp. I ended up buying a third-party "one size fits all" type... They lie too, but it works. I just have to adjust it so the volume key isn't being squashed. (also, no cut out for camera)
2 broken clips at hinge and counting.
Same here, my clip hinge broke both times. I just have it sitting there in the car driving down the road and the phone just falls off and the hinge is broken. I think the plastic is too thin, should be a metal part, and the spring tension always on it fatigues it. Bad design.
I went to verizon and told them I wanted their generic mount and they handed me this:
http://www.amazon.com/Bracketron-PH...r_1_41?s=STORE&ie=UTF8&qid=1285511830&sr=8-41
The one Verizon actually sells is slightly different as the little bottom nodes that hold the phone phone sits on can be bent in and thus you can move the phone around. I will have to take a picture of mine. Anyways even with a case it fits perfectly and its only like $20 and if you have the corporate discount which gets you 25% off it runs about $16.70 total after taxes which is what I bought it for.
angryspoon said:
I went to verizon and told them I wanted their generic mount and they handed me this:
http://www.amazon.com/Bracketron-PH...r_1_41?s=STORE&ie=UTF8&qid=1285511830&sr=8-41
The one Verizon actually sells is slightly different as the little bottom nodes that hold the phone phone sits on can be bent in and thus you can move the phone around. I will have to take a picture of mine. Anyways even with a case it fits perfectly and its only like $20 and if you have the corporate discount which gets you 25% off it runs about $16.70 total after taxes which is what I bought it for.
Click to expand...
Click to collapse
So which one would you recommend? I plan on doing a lot of driving up and down I-95 to visit friends in Maine/NH/PA/MD/VA and would love having Google's "Navigator" mounted on my windshield instead of having it sitting in a cup holder (like I do now). I'll be careful with any mount I get, but those universal mounts are just too bulky and a lot of them mess with the volume controls or doesn't leave me a space to plug the phone into my lighter outlet (or have weird mounting points, like in one of the air vents).
DeeBG said:
So which one would you recommend? I plan on doing a lot of driving up and down I-95 to visit friends in Maine/NH/PA/MD/VA and would love having Google's "Navigator" mounted on my windshield instead of having it sitting in a cup holder (like I do now). I'll be careful with any mount I get, but those universal mounts are just too bulky and a lot of them mess with the volume controls or doesn't leave me a space to plug the phone into my lighter outlet (or have weird mounting points, like in one of the air vents).
Click to expand...
Click to collapse
I really recommend the Verizon one made for the incredible. all buttons and ports are accessible on the incredible
Like I said, I leave the belt clip mounted at all times, and the only protection I use for my phone is my special pocket and a screen protector.
patches152 said:
It's amazing! Best custom mount I've owned. And the clip that holds the phone is also a removable belt clip. There's a punch out for the camera, been driving around with layar turned on. It is win.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I just bought it on a whim today and it is definitely great. Way better than the staples generic one that broke in the first 2 weeks
Wife and I both have one. Both broke right away. Replacements also broke. Always in the same place, the hinge for the clip snaps. The spring is simply way too powerful for the strength of the plastic. On the replacements I just slathered epoxy all over the hinge to make it a permanent mount. Neither one of us were using it for anything other than the car dock, but the thing just breaks like a cheap wine glass.
So in my experience they were 4/4 for breaking within 3 weeks. It's a great dock, but you just have to expect it to break unless you do what I did and glue the living crap out of it.
ive had my verizon mount for about 2 weeks now, my only complaint is that it has a removable belt clip. Ive tried different locations around my windshield and since I play with it so much, the clip has wiggled loose a time or two. other than that, its been better than any mounts ive tried to hack together for it.
TL;DR good mount, bit pricey
Looking to purchase a windshield car mount for my HD2 (TMOUS). I've seen a lot of posts raving about vent mounts, but not too many for windshield mounts. I found this product that seems like it should be able to do the job, but before purchasing I was wondering what other people have bought/think about it.
I'll only be using this while I put my phone into GPS mode, so I can get around the city easily.
Thanks!
just go BRODIT... I know it is not windshield but it fits perfectly... both the car and the phone... besides that I hate having something in the windshield while driving... in some states it is even forbidden....
From the photos, it doesn't seem like a good choice - I feel like the phone won't be secured enough, and even if it secures it, you don't seem to have a lot of options regarding angle tilt.
For the normal HD2 (not sure if it would fit the TMOUS) I recommend this from ebay. http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=310314688415
The mount is rock solid.
The tab on the cradle normally breaks off after a year or so's use with all the other versions I've had so I expect it to do the same, but I just buy the cheapest one I can find and swap over the new cradle.
The cases and other bits as well make the £11 an absolute bargain.
Definetly a steal, so sad there's no shipping to my country
apocalypse_bg said:
Definetly a steal, so sad there's no shipping to my country
Click to expand...
Click to collapse
I'd contact the seller and see if they can sort something out.
Don't bother, I'll jusk ask some friends who are studying there, and they'll just bring it over home when they return for the holidays
Anybody know if there is a car mount available that is either specific to the Holiday, or one that is universal but works just as well? I want to try iOnRoad:
Not that I need it, because I'm a good driver.. lol just curious as to how well it works. Plus, I use navigation on occasion and it would be nice to have a real mount rather than propping the phone up on the dash or holding it.
Here you are.
Awesome. But, you know, I can't really Google any car mounts Vivid users have already tried out and experienced for themselves. Because even though I have, I haven't found any. So that's really why I asked. Nice try, though.
rpendrick said:
Here you are.
Click to expand...
Click to collapse
wow. talk about an unhelpful post. Where's the "thanks for nothing" button?
rpendrick said:
Here you are.
Click to expand...
Click to collapse
next time, maybe you should check the google links before trying to be funny... you know... the ones that don't actually have mounts for the vivid...
thanks.
While they don't have one for the Vivid/Raider yet, I've always used ProClip mounts (Brodit outside of North America). They come in two pieces, one custom fit to the vehicle and one custom fit to the phone, and I like it very much. I've emailed them to see if they'll make a Vivid mount, but they gave the standard "We don't know what our plans are" answer. If people are interested, email them, maybe if they get enough questions, they'll actually make one!
The ProClips are ok. I've used them before. However, I've really grown to like the Scosche universal that you can find at Walmart. It uses two small bottom feet and has sticky gel on the back to hold the phone.
It comes with a windshield mount. When the gel loses its stick, just clean it with a damp rag. Mine has lasted through three cellphones and going.
Kensigton Universal Car Mount
I just bought this a few weeks ago and it work excellent with the Vivid, it holds the phone securely and has very minimalist design. To remove the phone from the holder is just a press of a button. I used the vent clip mounting option, as I prefer not to obstruct the windshield with anything. Below is the link to the product page on Amazon, which is where I bought it from.
http://www.amazon.com/gp/product/B003SE6LD0
I picked up a thunderbolt dock last night at Verizon (only $10) cut off the left side (farthest from plug) and it fits and world really well, im ganna add some foam to the back so it fits in better and more securely.
I am actually using a Kensington iPhone car mount (can't post a link yet) granted my Vivid isn't in a case but its only about $10 on Amazon and it holds the phone snugly while given access to the charging port and can rotate from lanscape to portrait easily.
The only issue I have is that the mic on this phone is so weak that I can't be heard on the phone if I answer on speakerphone while driving. Does anyone know a fix for this?
SGTMcClain said:
I am actually using a Kensington iPhone car mount (can't post a link yet) granted my Vivid isn't in a case but its only about $10 on Amazon and it holds the phone snugly while given access to the charging port and can rotate from lanscape to portrait easily.
The only issue I have is that the mic on this phone is so weak that I can't be heard on the phone if I answer on speakerphone while driving. Does anyone know a fix for this?
Click to expand...
Click to collapse
I'm using the same Kensington car mount. Bought it off Amazon because I saw it on sale for 6 bucks. Works quite well!
Sent from my HTC PH39100 using Tapatalk
Anyone know if htc makes different cradles for their car docks? I recently looked at an htc car mount/ dock for an evo 3d and it looks like an amazing mount with superior quality. I found a way to take off the evo 3d specific "cradle" and was wondering why they designed it that way if I couldn't find any other cradles online. It would totally make sense if I could go to a parts website and just buy the cheap cradle part. The mount is clearance at Best Buy so this would be the best inexpensive option I think.
rpendrick said:
Here you are.
Click to expand...
Click to collapse
What is funny is that I googled that and got this thread, so I clicked your link and it returned this thread, so I clicked your link...
Help, I'm stuck in a loop.
sjbotha said:
What is funny is that I googled that and got this thread, so I clicked your link and it returned this thread, so I clicked your link...
Help, I'm stuck in a loop.
Click to expand...
Click to collapse
Haha! Love this. +1
---------- Post added at 05:26 PM ---------- Previous post was at 05:19 PM ----------
Ive actually been in the market for a vent mount myself. I dont like window mounts mainly because they put your phone where it's sitting right in the sun the entire time its in the mount. Vent mounts help some to keep it out of the sun. I haven't bought one yet, but I plan to in the near future. However, before I do, I think I'm going to try this first. Found it in another thread, thought I'd share it here too.
http://lifehacker.com/5747897/how-to-build-a-car-mount-for-your-cellphone-from-office-supplies
My personal favorite is still the Mountek.
My first mount for my Inspire was a mountek. It worked great for what it is. I read somewhere that:
http://www.amazon.com/gp/product/B0052G6IRG/ref=oh_details_o00_s00_i00
can be modified to fit the phone. Mine is due to arrive tomorrow and found this thread looking for the other thread lol. IIRC you have to modify (or cut off for the less handy) the portion of the mount that curves around the top of the phone (mic jack area). No worried as the USB port with firm top/bottom clamping should hold the phone from lateral movement in landscape modes. I definately would not try to have it hold the phone upside down when modified.
Try a type similar to the Rocketfish Universal mount...
Hi guys,
Just recently got the Vivid. Best Buy sells the Rocketfish Universal mount for about $25 or so. I'm sure there's something similar out on the web...I like this mount because I can move the arms/feet around the buttons and still secure the phone in mount. Useful if you have a GPS (like google navigate doesn't do a fair job) or another phone that you swap in and out with...
Would love to find a mount suitable for a '95 Honda VT1100 (though with some velcro strapping the Rocketfish would work. Any suggestions there?
SGTMcClain said:
I am actually using a Kensington iPhone car mount (can't post a link yet) granted my Vivid isn't in a case but its only about $10 on Amazon and it holds the phone snugly while given access to the charging port and can rotate from lanscape to portrait easily.
The only issue I have is that the mic on this phone is so weak that I can't be heard on the phone if I answer on speakerphone while driving. Does anyone know a fix for this?
Click to expand...
Click to collapse
Try installing "Equalizer", from the AppBrain market. It really will boost the sound quality both ways, and it's customizable.
the co0kie said:
I picked up a thunderbolt dock last night at Verizon (only $10) cut off the left side (farthest from plug) and it fits and world really well, im ganna add some foam to the back so it fits in better and more securely.
Click to expand...
Click to collapse
Does yours allow the phone to actually charge properly? Mine it just slowly drains, figured I would see what your results were before dropping even more money on yet another cig lighter to usb port. My current one is spec'd to 500mA so if its functioning its provides the juice.
EDIT: Tested in car mode attached directly to the charger and it still slowly drained. must not be the dock then :/
slipgripcarmounts.com/Vivid-Raider-4G_c_26766.htm
I have a vent mount and bike mount for both Vivid and Inspire using Seido Surface cases. Fitment is excellent.
Sent from my HTC PH39100 using Tapatalk 2
Hi guys,
I've got a Brodit Pro-Clip already available in my car from my previous phone, but now that I've got the Note 2, I'm looking for a new mount. I'd like to re-use the pro-clip, but there are a couple of concerns.
1. The Active pro-clip for the Note 2 is quite expensive (but worth it, if I eventually go for it)
2. It's quite a large mount, so turning it horizontal (from time to time) will be cumbersome and it will get in the way
3. I've seen some other nicer looking mounts out there, but they're all suction...but I've been thinking...maybe I could get one and modify it a bit to fit on the brodit backplate?
Does anyone have any experience with this kind of thing, and any suggestions? I'm looking for something that either has, or will easily accommodate a charging cable (just invested in a good rapid car charger too, but don't mind if the new mount comes with one built in).
PS: I don't want a suction mount that needs to be stuck, even if it supposedly sticks on the dash.
Thanks guys
Doesn't need to suction to anything and you'll never need to ask about this again in the future.
http://www.amazon.com/gp/product/B005OMRCY6/ref=wms_ohs_product