HTCPedia Extended Battery Case - Droid Incredible Accessories

Just giving a heads up in case anybody has seen these and thought about buying one.
HTCPedia.com is selling an "Extended Battery Fit Hard Rubber Case for HTC Droid Incredible." I'm new, so I can't post the link.
I purchased one of these since I currently have one of the extended batteries in my Dinc and haven't seen another case that works with it. I received it on Friday and was a little shocked. This is NOT a case designed to fit the Incredible with an Extended battery. It is a standard case manually cut to open the back up so the extended battery can fit through it. As if that wasn't bad enough, not only did it not fit...but the cut job was really crappy. Squared off corners instead of rounded, double cuts in some places that left slivers of the material sticking out, etc. If you are planning on getting one of these you are better off just buying the standard case and cutting it yourself. You'll save money and likely do a better job.
HTCPedia has not responded back to my emails yet either as to if this was a mistake or honestly what they are trying to sell. I'll let you know if they respond with anything.

Here's the link for the case.
The quality in the pictures looks pretty bad to me, would have been a pretty good indication of the quality you'd receive. It's also only made for the 2150 extended battery/back.

That case is the one verizon sells look at the red one it has the same design inside as the one from verizon!!!! Haha so they just cut out the back piece!!!

BigNate said:
That case is the one verizon sells look at the red one it has the same design inside as the one from verizon!!!! Haha so they just cut out the back piece!!!
Click to expand...
Click to collapse
Yup, just cut it out. I did get a call back from HTCPedia just a few minutes ago and they are giving me a full refund. So that at least makes me feel a little better about the whole deal.

Related

Hard Case I got off Ebay.

http://morninglion.com/phonecase1.jpg
http://morninglion.com/phonecase2.jpg
http://morninglion.com/phonecase3.jpg
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=330216366160&ssPageName=STRK:MEWN:IT&ih=014
there's all the links. For $20, I like it. No support for extended battery, but stil nice. You have to open it to use the screen or keyboard, but I'm tough on my phone, and this compliments my Toughbook well.
Thought I would share.
I have the same case and like it a lot.
Seidio case for mogul - My favorite case*
Hey guys,
Not sure if you've seen this case, but I figured I'd post it.
http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=797
You can pick from a rubberized, aluminum, clear, or hybrid rubber-clear case.
You don't have to open the case to use the keyboard, so its perfect.
It doesn't have a clear plastic cover like yours, but I find that clear screen protectors from bestbuy do the job (i'm pretty rough on my phone as well).
sigh, still no case for the extended battery. Kind of getting tired of looking every day for something that will do the same as these cases. I can't understand why no one is producing a case like the seidio one for an extended battery. Does anybody know of one of those types of cases?
Unfortunatly thats true for just about every accessory out there for the 6800...
Even the car mounts have issues with Extended batteries.
I guess it has to do with the fact they are making these for the most common setups people have and until Extended batteries sell as many units as the phone does we are $#!^ out of luck...
i guess you have the super extended battery? not just the regular extended battery..
that things a beast.. i have the regular extended battery and love it. how's the super extended going for you?
when i bought my battery from seidio, they didnt have the super one. maybe now that they do, they'll make a special case as well.
I had the 2800 MAH battery, selling it for $25 and got the Mugen 1800MAH stock fit one. Mogen Power had a robbery though, so still waiting...
From email:
"Due to a break-in on last week in our European distribution centre, we lost most of our stock, processed shipments and computer equipment. Currently, we are arranging replacement stock from our factory and other distribution centres, which is expected to arriving this week. We expect to dispatch your battery at the end of this week. Our sincere apologies for the inconvenience and we will do our utmost to dispatch your order as soon as possible. You will receive an email with shipment details as soon as your parcel has been sent."
I have the seidio 3200 battery, i usually go about 2 days without charging and a 3-4 hour phone call drops me down to about 78%. But, yes, the thing is big and no, there are no cases, gelskins or anything else for this thing.
Hmm case does it's job. I was just up on a ladder in the Data Center at work... 12 feet up with a metal floor. Dropped the phone, it tumbled down a few rungs and hit hard on one corner against the floor after about 6 feet. It bent the case a bit, but all it well. It hit the bottom left corner on the screen side.
Yep I have the 3200 battery and it's funny...the 3200 with the battery cover from seidio is actually thinner than the 2200 battery I got from Ebay! LOL
I am waiting to buy the car dock from seidio to see if it works better with the extended battery. What I have now is a standard padded vice mount which is problematical for two reasons.
One the depth of the unit due to the battery and two the padding tends to press buttons when your putting the unit into the holder...
I love the monster battery!
And for those who wonder the battery comes with the cover when you order from seidio.
Looks like this case;
http://www.ipaqcases.com/pamdcppc6800.htm
Sure does. Cool!
Has anyone used this flip case. I was thinking about getting, but wanted some opinions first.
http://www.thepocketsolution.com/PSI-36478/Verizon+XV6800+Leather+Flip+Case.html
honestly the 2 piece hardcase that lsides with the phones stil lseems liek the best option to me
these are just to tedious to me just access the QWERTY, but there sick looking
lucky644 said:
Looks like this case;
http://www.ipaqcases.com/pamdcppc6800.htm
Click to expand...
Click to collapse
I just noticed that Ipaq has this case for extended batteries. I don't know if that's a new addition or has been there all along, but it's good to know that there's at least one case of this type that can handle extended batteries.

3500mah extended battery on pre-order ships 12/24/09

3500mah extended life battery for sprint hero on pre-order now, ships 12/24/09
http://www.seidioonline.com/product-p/bacy35hhrs-bk.htm
discuss
I swear by these guys for all my accessories and batteries, going on 4 phones now. Very satisified customer.
edit2: 09/23/09- email from seidio stating it is NOT compatible with the holster listed below
edit: and says it's compatible with holster, agian, very satisfied buy.
http://www.seidioonline.com/product-p/d-hlhhrsas.htm
This is by far my favorite of the 3 holsters I've previously owned for various phones by the same company. Phone sits very secure with no fear of falling out at all.
Interesting, the price is a bit steep but not too high.
I would like to see some higher res pics from a few angles to get a better idea of what the case cover looks like.
I have the holster but how do you know the extended battery fits the holster? From the single photo of the battery cover, it looks like the top sticks out as much as the area below the camera...
gqukyo said:
I have the holster but how do you know the extended battery fits the holster? From the single photo of the battery cover, it looks like the top sticks out as much as the area below the camera...
Click to expand...
Click to collapse
- Made from the highest quality Japanese cells
- Comes with a black replacement door featuring Seidio's signature soft touch coating
- Adds only 3-4mm to your device
- Keeps your phone charged and ready to go, even with heavy phone and data usage
- Compatible with our Holsters and Innodocks
- Capacity: 3500mAh
How long do we have to wait for a more reasonable price on these?
johnsongrantr said:
- Made from the highest quality Japanese cells
- Comes with a black replacement door featuring Seidio's signature soft touch coating
- Adds only 3-4mm to your device
- Keeps your phone charged and ready to go, even with heavy phone and data usage
- Compatible with our Holsters and Innodocks
- Capacity: 3500mAh
Click to expand...
Click to collapse
Yes I did see that though from the photo it does not look like that's the case. Do you really think it's compatible from that photo? I've had the extended battery for the Storm and the holster worked fine because the battery cover did not extend on the upper portion where the camera is. Guess we'll have to wait for someone to actually dive in but in the meantime I'm sticking to what I can tell from that photo on their site.
Reasonable price? depends on what you think is reasonable. You do realize that without either the battery or the phone, the other is pretty worthless. I think it's a great price considering crap motorola batteries are $30
got this from seidio, just an fyi, they must be talking about different holsters or the listing might just be plain incorrect.
Dear Customer,
Thank you for your inquiry at Seidioonline. We are more than happy to assist you with your concern. Those two products are not compatible. Please continue to visit www.seidioonline.com for future product compatibility and updates on these products.
Your business and continued satisfaction is of great importance to us here at Seidioonline Customer Service, so feel free to contact us at (832) 204-1118 with any questions or concerns.
Thank you,
Seidioonline Customer Service
Seidio Customer Service
Click to expand...
Click to collapse
I ordered this, and its been shipped already and I am awaiting arrival. I also have the innocase and holster combo, and while I know the innocase wont fit, I will try the holster and report back if that one works.
any idea which case will work?
:/
I got mine today. Huge battery
The replacement cover is ok, although I am afraid it will accidentally slide off in my pocket.
Overall, the added bulk really doesn't make a huge difference, in fact it makes it a little easier to hold.
Can't wait to see what the battery life on this sucker is like.
mhoepfin said:
I got mine today. Huge battery
The replacement cover is ok, although I am afraid it will accidentally slide off in my pocket.
Overall, the added bulk really doesn't make a huge difference, in fact it makes it a little easier to hold.
Can't wait to see what the battery life on this sucker is like.
Click to expand...
Click to collapse
I got mine today too. I also like the added bulk. It fits my Seidio holster, even though the innocase that I got with the holster wont fit. Made of the same material as the innocase so its hard to scuff etc. I'll report back after a few cycles to let people know what I'm getting usage wise out of it.
UPDATE:
Well, it came off the charger at 3:30pm today saying 100%. I have been hammering it mercilessly for 6 hours now. Streaming Pandora for six hours straight, Turned on GPS, set all of my social network notifications to the quickest pull intervals, and my mail also. I have had the web browser open for nearly three hours, had three calls of around 20 minutes each, and my awake time since I pulled the battery off the charger is 100%. I am sitting at 75% right now. I am trying to get the battery low so I can get a full charge for the next cycle, but this damn thing won't go down. I guess I'll try to download a game or something and play it while listening to Pandora. This thing is a beast....
This is a beast. Used it all evening last night, and the power meter did not budge.
Also the new back makes the Hero much easier to hold.
Waiting for a day in the office where I have a weak signal to see how it does there. I'm guessing this thing will make it through a day or two no matter what I throw at it.
By far the best accessory...
Awesome, guys, glad to hear this thing is the real deal. I'm thinking about getting one but I'm waiting for the price to go down. Anyone know if they usually do? Last extended battery I bought was only $7, this one is pretty steep.
I found a better deal but not in stock ATM:
http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=25424
sounds great. can't wait to buy one, but i'm waiting to find out which case is compatible. i'm not picky, can be a leather pouch, any suggestions?
Sottilde said:
Awesome, guys, glad to hear this thing is the real deal. I'm thinking about getting one but I'm waiting for the price to go down. Anyone know if they usually do? Last extended battery I bought was only $7, this one is pretty steep.
I found a better deal but not in stock ATM:
http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=25424
Click to expand...
Click to collapse
$70 is waay too much for a battery... dang!
anyone know of any silicone cases availible that will fit over this bad boy?
Could someone post some close up pics?
Sottilde said:
Awesome, guys, glad to hear this thing is the real deal. I'm thinking about getting one but I'm waiting for the price to go down. Anyone know if they usually do? Last extended battery I bought was only $7, this one is pretty steep.
I found a better deal but not in stock ATM:
http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=25424
Click to expand...
Click to collapse
watch out for these kinda deals, i'm fairly certain seidio's waranty doesn't transfer to 3rd party sellers completely.
I had purchased a battery from seidio previously that was DoA, and after a conversation with their RMA department getting my invoice number and all that, they said they will replace bad batteries from anywhere but since I purchased through seidio directly they would send me a replacement without having to send the old one back first (or at all, they just said to pitch it). The battery that was sent to me was tested with a full power cycle before being over-nighted to my door.
I don't know, it's something to think about. If I'm getting a quality piece of gear, and the service to back it. I don't mind throwing out an extra little bit.
I'm on my second charge. The phone has been off the charger since 12pm on Sunday. I am sitting at 70% on Monday at 2pm. I'm really liking the usage I am getting out of this. I did not beat on it too much yesterday, just a lot of normal use. I figure at this rate, I will have to charge it every three or so days. I'm hoping it improves after a few cycles, even though I've only charged it twice so far. I'm going to run it down to 30% or so before the next charge....who knows when that will be lol.

Case Mate Barely There for HD2 TMO_US

For any one who likes their Case Mate cover on their iPod and other products, you might find that the current HD2 cover by Case Mate DOES NOT fit the TMO-US model which is 1.5mm different. I think if Case Mate receives a spark of interest for this item through phone calls from TMOUS HD2 owners, They may want to comply with the demand.......give them a call as I did. They close at 5PM Eastern Time
CALL CASE MATE at 1-866-689-3432 AND HELP BUILT DEMAND for a great product. I find it interesting that they show a cover for the iPad on their website BEFORE its is even available for purchase but no cover for the best phone on the US market.
CALL CASE MATE 1-866-689-3432
i thought i read in the cases thread that they are already making it
methodz said:
i thought i read in the cases thread that they are already making it
Click to expand...
Click to collapse
They, in fact, do make it......for the "international version" HTC HD2, NOT TMO_US HD2.
http://www.case-mate.com/HTC-HD2-Cases/Case-Mate-HTC-HD2-Barely-There-Cases.asp
Look at the bold print just above the price.
If it is available, please enlighten us at where this elusive item is to be purchased.
Hi all, here is a little warning from me and Beards, who purchased the Case-mate barely there silver chrome for out international HD2.
I already returned this case. It was really a bad experience. Although it looks very nice, thin, save the slim design for HD2, unfortunately, it was a nightmare to take the phone out of the case. If you want to take the phone out often, or you are the type that like to change case once a few days like me, or worse if your HD2 crashes or hang and you have to do a soft reset with pen, you really shouldnt buy this case. For the first time I put my phone into the case, and near 10' to take it out, it also nearly scratched all 4 rubber corners of my HD2. If I continue using this case, my beloved HD2 going to be just like the pics in Nightfire123 review, really terrible.
I really recommend not buy this case, if you dont want your lovely HD2 get scratches.
And here is Beard's opinion through our PM:
"When I received my case I was away abroad and it was my daughter who said she thought the case was marvelous.
However, since coming back home and having now tried the case I agree completely, it's an absolute nightmare to take off (only found this out the other day when I had to remove the case from the phone).
Only be grabbing one of the sides and pulling it really hard did I 'eventually' manage to prize it from the phone.
I shan't be returning the case as my daughter threw away all the packaging and it didn't cost a great deal.... I shall however keep the case so that I can use it to experiment against other cases."
U can check this thread from Nightfire123 to see how it will scratch your HD2 after using for a while
http://forum.xda-developers.com/showthread.php?t=642714
fantasytozi said:
Hi all, here is a little warning from me and Beards, who purchased the Case-mate barely there silver chrome for out international HD2.
I already returned this case. It was really a bad experience. Although it looks very nice, thin, save the slim design for HD2, unfortunately, it was a nightmare to take the phone out of the case. If you want to take the phone out often, or you are the type that like to change case once a few days like me, or worse if your HD2 crashes or hang and you have to do a soft reset with pen, you really shouldnt buy this case. For the first time I put my phone into the case, and near 10' to take it out, it also nearly scratched all 4 rubber corners of my HD2. If I continue using this case, my beloved HD2 going to be just like the pics in Nightfire123 review, really terrible.
I really recommend not buy this case, if you dont want your lovely HD2 get scratches.
And here is Beard's opinion through our PM:
"When I received my case I was away abroad and it was my daughter who said she thought the case was marvelous.
However, since coming back home and having now tried the case I agree completely, it's an absolute nightmare to take off (only found this out the other day when I had to remove the case from the phone).
Only be grabbing one of the sides and pulling it really hard did I 'eventually' manage to prize it from the phone.
I shan't be returning the case as my daughter threw away all the packaging and it didn't cost a great deal.... I shall however keep the case so that I can use it to experiment against other cases."
U can check this thread from Nightfire123 to see how it will scratch your HD2 after using for a while
http://forum.xda-developers.com/showthread.php?t=642714
Click to expand...
Click to collapse
Your opinion is exactly what I like to see and I greatly appreciate your input!!! You make a very good point; there is no soft reset access from the front of the device. Also, the memory card is also not accessible. I'm agreeing with you; maybe I don't want this case.....Buuuuuut, if they did make changes for fitting TMOUS HD2, and take customer complaints on the design into account, the new design may be as to improve on the errors of the previous. Hey, I'm an optimist.

Otterbox case out for Droid 3 now

http://www.otterbox.com/DROID-3-by-..._color=20&start=1&cgid=motorola-droid-3-cases
It's been out for weeks
My apologies, I meant out as available to order directly from otterbox.com.
The product was previously shown as "Coming Soon" from their site.
Just got my confirmation email from Otterbox last night 8)
Wonder if it will be too bulky for an already semi bulky phone?
somemadcaaant said:
Just got my confirmation email from Otterbox last night 8)
Wonder if it will be too bulky for an already semi bulky phone?
Click to expand...
Click to collapse
Does it work with the car or media dock?
Sorry mate not sure, i wont get the dock, car mount or otterbox case untill a reliable source in Aus gets these for me which will be months away.
The Dock has a removable base that the phone sits in so I would probably think it should fit, I remember some1 else having some snap on cover for the D3 which worked in the Media Dock. Not sure about the car dock tho.
-smc
Does anybody know if the OtterBox can be used with the extended battery? Also, does it make the phone REALLY bulky? How's the top row of the keyboard?
I was expecting chunkier, but I think I'd still rather use my phone "naked"
mmcgee91 said:
Does anybody know if the OtterBox can be used with the extended battery? Also, does it make the phone REALLY bulky? How's the top row of the keyboard?
Click to expand...
Click to collapse
i have the extended battery as well as the otterbox case. both work well. i got tge case pretty cheap on amazon.
jesusishere said:
i have the extended battery as well as the otterbox case. both work well. i got tge case pretty cheap on amazon.
Click to expand...
Click to collapse
You got it to fit with the extended battery? I received my Otterbox earlier today and I can't seem to get it.
Just got the Otterbox today and I can confirm it does fit with an extended battery. However the battery, which also came today, is a cheapo 2200mAh from amazon. It a bit bigger than the standard not sure if its the same size as the extended. I use it with the standard back and is not bulging out. Hopefully this is an extended and not labeled incorrectly.
[edit] This battery is not getting hot while charging. Its 77 and the standard it usually over 100. Though it may be misreported.
Let me know how the battery does compared to the stock! Mainly if its lasting longer than it or if the cheap batttery isn't worth the money.
Sent from my DROID3 using Tapatalk
geigerm said:
Let me know how the battery does compared to the stock! Mainly if its lasting longer than it or if the cheap batttery isn't worth the money.
Sent from my DROID3 using Tapatalk
Click to expand...
Click to collapse
Well the battery's not likely 2200mAh. It gets about the same life as the stock 1500. Still worth the 5 bucks I paid. It's GTMax brand if anyone's interested.
I'm kind of mad I bought the shell/holster they offered, thing's great. But, this looks badass, lol.
wootizzle said:
I'm kind of mad I bought the shell/holster they offered, thing's great. But, this looks badass, lol.
Click to expand...
Click to collapse
The vzw holster is crap as far as i'm concerned. When I got a replacement for a vibrate motor problem I noticed how the new one was much more sturdy when sliding out the keyboard. The case caused it to come loose. The clip near the back of the front camera is too tall and the screen pulled upwards.
Decided to take off the battery cover and see how it fits in the Otterbox. There's no problems it even feels a bit smaller almost as though there's no case on the back. Even tried dropping it from about a foot to see if the battery or sim or sdcard would fall out, didn't move at all. So there should be no problem with an extended battery. Someone at androidforums cut the battery cover to make the extended battery fit. Doesn't sound like a very good idea but I guess it's another option.
Hmm. I have no issues with the vzw one *knock on wood* and its on my hip all day. I have bumped into a few doors at work directly on it (as well as some stupid people in the metro) its held its ground so far.
eww245 said:
The vzw holster is crap as far as i'm concerned. When I got a replacement for a vibrate motor problem I noticed how the new one was much more sturdy when sliding out the keyboard. The case caused it to come loose. The clip near the back of the front camera is too tall and the screen pulled upwards.
Decided to take off the battery cover and see how it fits in the Otterbox. There's no problems it even feels a bit smaller almost as though there's no case on the back. Even tried dropping it from about a foot to see if the battery or sim or sdcard would fall out, didn't move at all. So there should be no problem with an extended battery. Someone at androidforums cut the battery cover to make the extended battery fit. Doesn't sound like a very good idea but I guess it's another option.
Click to expand...
Click to collapse
Sent from my DROID3 using XDA App
Nice. Just wish they had it in
The OtterBox case can be found on amazon for around $25 shipped, it's well worth it. Best case I ever had for a phone. I got it to work with the Motorola extended battery, I just modified the stock battery cover with a dremel and alot of patience.
How much was actually 'shaved'? Did it go through the cover all the way and expose the insides at all?
afturburn said:
How much was actually 'shaved'? Did it go through the cover all the way and expose the insides at all?
Click to expand...
Click to collapse
Oh yeah almost the whole battery is exposed, but the inside of the otter box is silicon and it seal everything up and holds it tight. The original battery cover sacrificed his life so that I could use my extended battery. I still have the extended battery cover if I ever choose to take off the ottterbox. There's a thread at droidforums.net that I posted pics and all in.

Has anyone got any of these generic dot view cases?

Are they good? They're even advertised as "Genuine" for $7~8, but without the HTC logo at front / back.
Ebay link
Note: Yes, we know that not everybody likes the dot view case.
200
lsv-1 said:
Are they good? They're even advertised as "Genuine" for $7~8, but without the HTC logo at front / back.
Ebay link
Note: Yes, we know that not everybody likes the dot view case.
Click to expand...
Click to collapse
Here's the one with the HTC logo for a few bucks more.
Personally, I think it's the same exact piece of plastic. One just has a logo and a steeper price.
http://www.ebay.com/itm/HTC-DOT-VIEW-CASE-COVER-FOR-NEW-HTC-ONE-M8-HC-M100-GENUINE-OFFICIAL-/221503424128?pt=US_Cell_Phone_PDA_Cases&var=&hash=item3392a20680"]Check this out
ImSt00pid said:
Here's the one with the HTC logo for a few bucks more.
Personally, I think it's the same exact piece of plastic. One just has a logo and a steeper price.
http://www.ebay.com/itm/HTC-DOT-VIEW-CASE-COVER-FOR-NEW-HTC-ONE-M8-HC-M100-GENUINE-OFFICIAL-/221503424128?pt=US_Cell_Phone_PDA_Cases&var=&hash=item3392a20680"]Check this out
Click to expand...
Click to collapse
yea i would stay away from the unbranded ones i had the normal one but it wouldnt close all the way because ive got a glass screen protector so i ended up returning it and getting an otter
ImSt00pid said:
Here's the one with the HTC logo for a few bucks more.
Personally, I think it's the same exact piece of plastic. One just has a logo and a steeper price.
http://www.ebay.com/itm/HTC-DOT-VIEW-CASE-COVER-FOR-NEW-HTC-ONE-M8-HC-M100-GENUINE-OFFICIAL-/221503424128?pt=US_Cell_Phone_PDA_Cases&var=&hash=item3392a20680"]Check this out
Click to expand...
Click to collapse
Guess what bro, those aren't genuine either even if they say so. If you look at the pics you'll notice that some don't have the htc logo
I have the genuine gray, I bought it when I've got the phone, but I'm curious about the quality of the ones they're selling for $8, that's it.
To be honest they look exactly the same but I would like a closer look. Sellers in Amazon claim that they're identical to the genuine with the exception of the logo.
Bierce22 said:
yea i would stay away from the unbranded ones i had the normal one but it wouldnt close all the way because ive got a glass screen protector so i ended up returning it and getting an otter
Click to expand...
Click to collapse
I always stay away from unbranded stuff, but these called my attention because they look identical and there are more colors available
Don't put a 10cent case on a $600 phone.....spend the money on a genuine case.
Sent from my SM-P600 using XDA Premium HD app
Weirdly I got one on eBay for about 9$ sold as authentic and I figured why not get one to check out how much I like it and it was HTC branded. Although that could be faked.
Sent from my HTC One_M8 using
I had an original dot view case that I purchased the week the M8 came out. I accidentally ripped the front from the back trying to stretch it to go over my glass screen protector. Back in July I purchased this one, http://www.ebay.com/itm/291190318285.
It doesn't say HTC and obviously an overseas knockoff. In my opinion it's much, much nicer than the OEM version. It will flip open all the way back easily and isn't near as springy. It also works with my .3mm glass screen protector, http://www.aliexpress.com/snapshot/6100440084.html.
henderjr said:
I had an original dot view case that I purchased the week the M8 came out. I accidentally ripped the front from the back trying to stretch it to go over my glass screen protector. Back in July I purchased this one, http://www.ebay.com/itm/291190318285.
It doesn't say HTC and obviously an overseas knockoff. In my opinion it's much, much nicer than the OEM version. It will flip open all the way back easily and isn't near as springy. It also works with my .3mm glass screen protector, http://www.aliexpress.com/snapshot/6100440084.html.
Click to expand...
Click to collapse
They are the same in quality! :good: That's what I thought.
bandjosh said:
Weirdly I got one on eBay for about 9$ sold as authentic and I figured why not get one to check out how much I like it and it was HTC branded. Although that could be faked.
Sent from my HTC One_M8 using
Click to expand...
Click to collapse
Share the link or pics please!
GalaxyNotesTx said:
Don't put a 10cent case on a $600 phone.....spend the money on a genuine case.
Sent from my SM-P600 using XDA Premium HD app
Click to expand...
Click to collapse
Don't use one of these cases for protection period. I can almost state with certainty that if you drop your phone on any kind of solid surface, it will definitely come flying out of these cases. In fact, if you clumsily open the case to fast the device will come flying out sometimes. That is in the original from Verizon. They offer some screen protection while in pockets or bags, but little to no drop protection & even in bags, the top & bottom of the device is not protected from scratches.
It was a little more than I remembered but it's 13$ http://www.ebay.com/itm/221503424128?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
The pictures are of mine.
Beyond that I agree with the post above mine, the dot view case is very functional as an accessory but as a protector it's useless it pops out so easily.
Sent from my HTC One_M8
I ordered this one last night and hope to see it in the mail sometime next week.
http://www.ebay.com/itm/12142505686...49&var=420362064890&ssPageName=STRK:MEBIDX:IT
And I also agree with the two previous posts. I bout the official case back in June and two weeks ago, it fell on a carpeted space and the phone flew out of it as well as the corners that secure the phone popping off. Since I enjoyed the functionality of the case, I ordered the above since spending $40.00 for something HTC will not stand behind (I tried to get them to replace it but was told they would not) was not something I was willing to do again.
I will report back pnce I get it.
I had the fake one with logo and the real deal case I got from a Verizon store. Felt the fake with the logo was just as good. So went to return the real deal case at Verizon. Turns out I mistakenly packaged the fake one and returned that one to Verizon(honest mistake). I had no idea until later when I took my One out of my csndyshell case and popped it in the dot view....So while I didn't mean to do that, I ended up with the real deal case. But honestly the fake one closed better than the real one. That is how close they are.
I'm on the Dot View case fence. I really like the concept but the reviews I've read have kept me from picking one up. Does the flap "loosen up" for lack of a better term after using it over time. What I mean is when open and flipped to the back does it start loosing it's springness that people complain about. I like hearing that the generic's seem just as good as the one from htc. I may just have to pick one up at the lower price.
I had an authentic one, and then recently bought one of those non-authentic ones.
As a direct comparison, they both look the same, but the quality is different. particularly, the dots' translucent level is very uneven, so you'll get random brighter vs darker patches
on the authentic one, all dots have consistent translucency
OME or Knock-off, I wish that someone would come out with one that snaps on decently (even if it used double-sided tape) and maybe wrapped in leather. The plastic makes the phone feel so cheap! I had the original. I have since misplaced it since I got a cheap otterbox knock off for now. Does the job, but I do miss the DotView for the cool factor.
theandies said:
I'm on the Dot View case fence. I really like the concept but the reviews I've read have kept me from picking one up. Does the flap "loosen up" for lack of a better term after using it over time. What I mean is when open and flipped to the back does it start loosing it's springness that people complain about. I like hearing that the generic's seem just as good as the one from htc. I may just have to pick one up at the lower price.
Click to expand...
Click to collapse
I have an OEM Dot View case and love it. I spent about $15 for it on Amazon. HTC also updated Dot View to add more functionality. And I was surprised yesterday by the Halloween animations. I'm very impressed by it and glad I got it.
SoI received my case today in the mail and here are my findings:
1. The case closes just as well as the OEM one I had.
2. The plastic case itself feels a bit thinner that the OEM one but I like that since I felt the OEM one was a bit too thick and added bulk to the phone.
The "Seams are not as smooth as the OEM but I am going to try and use a nail file and see if I can't fix that my self
4. The "Springiness" of the hinge that is in the OEM is not present in this case as it was in the OEM
5. The cover does not lay flat on the back of the case when opened all the way but I think that is just due to the design of the case.
6. The case seeme to snap onto the phone as well as the OEM case did.
To me, the $8.00 I spent on this case is totally worth it. As a matter of fact, I might order myself a second one to have different colors to chose from. If you think about it, for the price of one OEM you can get 6 of these in different colors and still have $2 and change left over!
I posted some pics of the case but it's hard to see any details.
Hope this helps you guys make a choice.
RonMac said:
I ordered this one last night and hope to see it in the mail sometime next week.
http://www.ebay.com/itm/12142505686...49&var=420362064890&ssPageName=STRK:MEBIDX:IT
And I also agree with the two previous posts. I bout the official case back in June and two weeks ago, it fell on a carpeted space and the phone flew out of it as well as the corners that secure the phone popping off. Since I enjoyed the functionality of the case, I ordered the above since spending $40.00 for something HTC will not stand behind (I tried to get them to replace it but was told they would not) was not something I was willing to do again.
I will report back pnce I get it.
Click to expand...
Click to collapse

Categories

Resources