Database Develop

[Q] Captivate With I9000 Firmware Stuck in Recovery Mode

There have been those that run into problems after installing the XXJP3I9000 update on the Samsung Captivate and attempt to reboot into recovery mode. The issue that they have is that since the Captivate has no physical home button to select an option like you can with the Galaxy S, you can't select an option, and therefore you can't reboot your device regularly. While I am in this same problem and have not figured out a solution, I have started this thread to post what knowledge I have about this issue so that others may help get this issue figured out. If anyone has information on how to fix this problem, please comment below. Let's fix this!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
First of all, the key combinations that standardly would work with the original captivate firmware will not work anymore. Pressing all three buttons (Vol+, Vol - and Power) will only power cycle the phone, that is, until you let up on the buttons. Pressing Vol+ and Vol- and then plugging your phone into the computer will also do nothing. (By nothing I mean will take you back to the recovery menu)
Every key combination will only take you back to the recovery menu, so key combinations seem to be out.
If you boot into recovery mode, take out the battery and put it back in, all the while keeping the phone plugged in to the computer, the phone will enter the "POWER RESET OR UNKNOWN UPLOAD MODE", which will show your device in windows as being a Samsung USB Composite Device and a Samsung Mobile Modem (gadget serial, Windows 7) While this may be helpful, you cannot run ODIN or ADB in this mode, nor does this allow disk access. If you have Samsung Kies installed, it will detect a device, but will never complete loading it.
Other information with this method: On the phone screen, as well as showing "POWER RESET OR UNKNOWN UPLOAD DEVICE" the screen will also show the following in red:
RST_STAT =0X1
PMIC_IRQ1 =0X0
PMIC_IRQ2 =0x0
PMIC_IRQ3 =0x4
PMIC_STATUS1 =0x40
PMIC_STATUS2 =0x2c
If this helps anybody, it was a pleasure
Another method I found briefly was that after installing Kies, and rebooting the phone into recovery mode (again) my computer detected four new devices, two of them being Samsung Android devices and one being a disk drive. Potentially, without freezing or error, the drivers that are included with the Kies software will detect and allow for disk management while the phone is in recovery mode. Three of the four devices installed without error for me, but the fourth, the actual Android device, continued to say "installing device" until I unplugged the phone out of frustration. It has since not detected those four devices again, and I have yet to figure out how to do that again. The nice thing about that was that although the adb.exe reboot download command did not work, adb.exe did detect the phone. if this is true then rebooting normally or into download mode should be easy.
The last thing I noticed is that button furthest to the left on the main screen on the captivate will close the recovery menu when pressed, and leave the background behind, and then will reopen the recovery menu when pressed again. This is showing me that the four touch buttons are operable, but not configured. If it were possible to reconfigure the actions that pressing these buttons do, then it would be easy to be able to reboot the device normally.
I have compiled information to the best of my ability, and here is a question to ask, that I think will help solve the problem. Can the captivate with I9000 2.2 software run adb in recovery mode?
Comments, Questions, and Most of all, answers would be appreciated for me, as well as for other users with the same problem as I. Hopefully, this thread can be the solving point for this problem.
Many Thanks,
TouchofDestiny
The n00b who isn't a n00b at all

An Update: The reason that the combinations don't work for me or either people is because they (and I) fail to install the captivate kernel, and that is making the volume power button controls useless.

same here i put froyo from the galaxy s i9000 and i cant change the rom or get into recoverymode because buttons dont work man this sucks and 3G or Edge doesnt work.....

You're problem is a little different. If you can't get into recovery mode, than that means you aren't in recovery mode, which means you can use ADB to enter download mode and use Odin to flash your phone. I have given up looking for a solution, and have sent my phone back to AT&T for a replacement. Since I'm still in my thirty day trial period, it doesn't matter if I used different firmware or not. Hopefully others won't get into the situation I had. For me, this thread is complete.
brandon9721 said:
same here i put froyo from the galaxy s i9000 and i cant change the rom or get into recoverymode because buttons dont work man this sucks and 3G or Edge doesnt work.....
Click to expand...
Click to collapse

hi,
I solved the same problem doing this:
start odin.
take out battery. plug in USB. press both volume buttons. insert battery while pressing those buttons.
Done. download mode should appear.

yep, same boat
I am in the same position here. I downloaded the froyo leak and installed it with odin, no problem there. Upon startup into froyo, all was good, except my phone was stuck in horizontal mode until I tilted it vertical, *then* it would go horizontal. So basically I am 90 degrees off kilter. I decided to look around for another rom to try, and in the process managed to get stuck in recovery mode. Couldn't tell ya what firmware I have, just what is on the endless recovery screen that I cannot get out of!
I have no external microSD card, only the SIM card, and no way to get it recognized on my XP or win 7 system.
Really, really stuck here, guys. I do have the androidsdk installed, if there is a way to get it to reboot. As it is, adb cannot see the device, so I am looking at a truly bricked phone.
And yes, this is a US phone, which is why the power button and home button are not mapped (I assume).
I am DESPERATE for some help here!

and while I am at it...
I WAS able to get into download mode with the shovel guy originally by using the 2 volume keys+power, usb (odin up), battery in, release power.
No more. No key combo works.
Totally bricked the Samsung, which is supposed to be impossible!

pkrouse said:
I WAS able to get into download mode with the shovel guy originally by using the 2 volume keys+power, usb (odin up), battery in, release power.
No more. No key combo works.
Totally bricked the Samsung, which is supposed to be impossible!
Click to expand...
Click to collapse
when you are on the i9000 rom the only button that will get you in download mode is the vol down

That's HUGE!
You, sir, are a gentleman, scholar, and all-round smart guy! How did I miss that? I coulda SWORN I was getting into download mode with both volume keys. I've never been so happy to see a little Dalek dude with a shovel in my LIFE. 2 minutes in the one-click installer and now I'm back in business!
Thanks for helping a terrified owner out, and preventing a trip to the AT&T store.

I cannot go to download mode
I have the same problem here. Stuck in the recovery mode after upgrade the froyo and had the orientation problem. How do you go into download mode or power reset or unknown upload mode? Any button combination doesnt seem to work for me.
How do I do?
Please HELP. I am struggling here
Thanks

xaga150 said:
I have the same problem here. Stuck in the recovery mode after upgrade the froyo and had the orientation problem. How do you go into download mode or power reset or unknown upload mode? Any button combination doesnt seem to work for me.
How do I do?
Please HELP. I am struggling here
Thanks
Click to expand...
Click to collapse
the key to the i9000 rom/kernel button combo is VOL DOWN + using the USB trick. do not press vol up + down, just the down while you are plugging in the usb cable

i too am stuck in recovery mode. the only way i can get into download mode is by using both volume buttons. just holding the down button just sends me to revoery mode as well. how can i fix my phone in download mode?
nevermind, reinstalled 2.2 and it works now.

Eureka I got it...I think
I installed froyo 2.2 i9000 on my captivate and got stuck in recovery mode...power button doesnt select and when I hold down the up and down vol buttons I couldnt get the downloading icon anymore either. Then I remembered something from another post....
Home + Vol Down + Power = Downloading Icon
It worked for me....let me know if this helped....I'm officially unbricked.

Hey. I'm in the same boat. My Captivate has I9000 firmware running it and it won't run properly. I can't access the settings to enable USB debugging in order to boot in either Recovery or Download using adb and no button combination works for me. I can't use button combos to boot into either Recovery or Download mode.
Does anybody have any idea what is going on and how to fix this?

JPBetley said:
Hey. I'm in the same boat. My Captivate has I9000 firmware running it and it won't run properly. I can't access the settings to enable USB debugging in order to boot in either Recovery or Download using adb and no button combination works for me. I can't use button combos to boot into either Recovery or Download mode.
Does anybody have any idea what is going on and how to fix this?
Click to expand...
Click to collapse
JPBentley-- Since the I9000 firmware is set to use physical buttons, and the Captivate doesn't contain any, once you get into recovery mode, you cannot get out. The standard Captivate key combinations to get into download mode do not work, as do the combinations to get into download mode via the I9000 firmware. Basically, you get to a dead end. Unless there is some way to flash the phone's ROM outside of download mode, which I doubt, your best bet is to return the phone for a replacement. After haggling around with AT&T for a while, they admitted that installing the I9000 ROM doesn't invalidate your warranty, so they should take it back. They did with mine, and now I'm running the official Froyo leak. Good luck with your new phone!

SOLUTION
For all those that are having this problem, Ive struggled with it & tried EVERY possible button combination & nothing worked.
The ONLY solutions I have found is to use a usb JIG. Take out the battery, sim card & sd card, plug in the Usb JIG & put the batter back in. Give it a couple of seconds & I'tll enter recovery mode without pushing any buttons. You dont even need to push the power button, it's that simple.
Here is an image of how to make one if you are electronically inclined, personally I am not so I found a local electronic parts store & they put on together for me.
1.bp.blogspot.com/_3KjgtwnRiWM/TNTyjkZGquI/AAAAAAAABL4/7NSmqrYmkmU/s640/i900.jpg
If you want, you can also buy one online, I cant post a link becuase Im a new member but just search for "samsung usb jig" on ebay.com & youll find plenty.
shop.ebay.com/?_from=R40&_trksid=p5197.m570.l1313&_nkw=samsung+usb+jig&_sacat=See-All-Categories

yes, i think you need to build a jig or buy one online if you want to play with custom rom. you may not need it now, but you may need it just in case.
http://cgi.ebay.com/ws/eBayISAPI.dl...47234&ssPageName=STRK:MESELX:IT#ht_511wt_1139

agustinpac said:
hi,
I solved the same problem doing this:
start odin.
take out battery. plug in USB. press both volume buttons. insert battery while pressing those buttons.
Done. download mode should appear.
Click to expand...
Click to collapse
OMG you saved my life
thx so much for your post

I have the same problem, i can get into recovery mode. I can also get to download mode but Odin doesnt see my phone and neither does adb. By pulling the battery with no buttons pushed it goes straight into recovery mode. Looks like I have a brick now. If anybody has any suggestions please let me know.

drowe24 said:
I have the same problem, i can get into recovery mode. I can also get to download mode but Odin doesnt see my phone and neither does adb. By pulling the battery with no buttons pushed it goes straight into recovery mode. Looks like I have a brick now. If anybody has any suggestions please let me know.
Click to expand...
Click to collapse
That's not even close to a brick. Are you using a usb port closest to the motherboard on your pc? Is your cable good? Make or buy a jig, that will put your phone into download mode.
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro

Help, choose wrong phone for ROM Manger and now stuck in Android Recovery Mode

Help guys.
I have a Samsung Galaxy S Captivate I897. Last night I installed the Clockworkmod ROM Manager in there and was messing around with it.
I choose my phone model to be the the I9000 and then I went into recovery mode to restore the previous ROM, but guess what? It went into recovery mode, the volume up and down buttons select the menu items and it asks me to hit the "OK key" to enter.
The Captivate doesn't have an OK key, it uses the power button. So the Android Recovery Mode here thinks the phone is a I9000 and I can't get it to do anything other than reboot into that mode.
I've tried using the ADB to try to get back into download mode but it's no longer reading the phone. The volume + power buttons to go into that mode has never worked for this phone either.
I'm at a loss at what to do. Is there anyway I can get out of recovery mode and into download mode or back to regular phone usage here? Would I need to take it to an android developer?
Thanks for your help.
Thanks for your help.

vancouverguy said:
Help guys.
I have a Samsung Galaxy S Captivate I897. Last night I installed the Clockworkmod ROM Manager in there and was messing around with it.
I choose my phone model to be the the I9000 and then I went into recovery mode to restore the previous ROM, but guess what? It went into recovery mode, the volume up and down buttons select the menu items and it asks me to hit the "OK key" to enter.
The Captivate doesn't have an OK key, it uses the power button. So the Android Recovery Mode here thinks the phone is a I9000 and I can't get it to do anything other than reboot into that mode.
I've tried using the ADB to try to get back into download mode but it's no longer reading the phone. The volume + power buttons to go into that mode has never worked for this phone either.
I'm at a loss at what to do. Is there anyway I can get out of recovery mode and into download mode or back to regular phone usage here? Would I need to take it to an android developer?
Thanks for your help.
Thanks for your help.
Click to expand...
Click to collapse
Shut off the phone, open up odin(DG's flash to stock one) hold the power and the menu button. Once you see the ATT screen release the power while continuing to hold the volume buttons. Once odin recognizes your device flash to stock using the utility. Once this works donate to DG for saving your ass. Also, quit using ROM manager. Just use the update.zip method everyone else uses.

+1 for just using CWM update.zip It is sooo much easier/faster.

Thanks, but it didn't work. My Galaxy S is one of those where the volume + power buttons don't work to get it into download mode.
I did try power + menu as you suggest, but that doesn't work either.

try this
1. open odin.
2. With phone unplugged remove battery
3. with battery removed plug phone into pc via USB
4. with battery still removed simultaneously hold down Vol. + / - (forget about power button just hold down the two vol buttons)
5. While holding down the vol + / - insert the battery (keep the vol buttons down and hopefully DL screen comes up)

silverslotcar said:
+1 for just using CWM update.zip It is sooo much easier/faster.
Click to expand...
Click to collapse
I cannot stress this enough.
Also, OP, if the above doesn't work, it might be USB jig time.

pwr isn't used to go into dload mode - that would turn your phone on.
Do this:
Open odin
Remove bat, sim, ext mem card
replace bat
hold vol -/+ and plug in data cable to computer
(should be download mode)
If that fails, then get yourself a jig... gotta search for the thread though - should cost a couple dollars. Then once you're back up... look up the thread to fix the 3 button combo.

You might try turning the phone off then hold VOLUME DOWN and POWER (not vol up/dwn/pwr) to get into download mode. Make sure to remove the sim and sd cards.

I bricked my phone over the weekend and had similar problem you did.the easiest way too get out in to download mode is a jig. Its easy and cheap to do.look on you tube under un brick captivate fort a tutorial.
Sent from my SAMSUNG-SGH-I897 using XDA App

Question about using update.zip to install clockwork recovery after flashing to stock (and avoiding Rom Manager):
Is rooting still required?

doreyu said:
Question about using update.zip to install clockwork recovery after flashing to stock (and avoiding Rom Manager):
Is rooting still required?
Click to expand...
Click to collapse
Nope. No root needed

mcord11758 said:
Nope. No root needed
Click to expand...
Click to collapse
Awesome, great that would be hugely faster, thanks.

doreyu said:
Awesome, great that would be hugely faster, thanks.
Click to expand...
Click to collapse
Once you learn that trick you are on stock for like 2 minutes before you flash

Yeah I'm kind of a lurk but I've been around for about a month just flashing everything, and I had no idea it could be done like this till today. Going to make my next one even faster.
Sent from my SAMSUNG-SGH-I897 using XDA App

Nothing seems to work.
I'm going to try the jig method Wednesday morning. Wish me luck!

I tried the jig and it didn't work.
What happened was that it got me back into recovery mode, not download mode. Tried it several times. So unless I'm hitting the wrong points on the phone usb plugin (other than the last two), I'm hooped.
I tried the direct resistor wire to points in usb plugin method. I didn't try the one where I cut open a mini-usb cable and use the plug as a dongle, although I think it may get the same result.
What do you guys think?

[Q] Flashing to Froyo Issue

My Phone: Stock Eclair 2.1 JH7 update Build 1006
(amazingly no GPS or shutdown issues)
Rooted
Voodoo Lagfix
That's It.
I read alot on here about upgrading to Froyo, regarding having to un-root and stopping lag fix. I could not figure out how to stop lagfix, which I figured I had to be rooted to do so, so I just didn't un-root either. So my mistake I just said F-It and started Kies Mini and plugged in my phone. My firmware updated and my phone rebooted, however it gets to the Galaxy S screen, and instead of booting up my screen goes black and nothing happens, like it shuts off. So, what should I do from here, as this is my only phone, and I don't have readily available access to a computer.

get to the download mode and reflash to stock using odin.

well that's what I was thinking of doing, however. it seems I can only boot into recovery mode. Vol. Down button and Power button. The three button combo seems to do nothing for me, don't know why. So how do I get into Download mode? My first phone WAS the three button combo.

ConeyKiller said:
well that's what I was thinking of doing, however. it seems I can only boot into recovery mode. Vol. Down button and Power button. The three button combo seems to do nothing for me, don't know why. So how do I get into Download mode? My first phone WAS the three button combo.
Click to expand...
Click to collapse
the key combo may not work on certain build phone. if it happens to your phone, you have to build a jig yourself or buy one (i can send you one, PM me).

ConeyKiller said:
well that's what I was thinking of doing, however. it seems I can only boot into recovery mode. Vol. Down button and Power button. The three button combo seems to do nothing for me, don't know why. So how do I get into Download mode? My first phone WAS the three button combo.
Click to expand...
Click to collapse
fire up ODIN 1-CLICK
connect USB to Computer
remove battery from phone
replace battery
hold down both volume buttons
insert micro USB into phone
*DOWNLOAD MODE!*

Well I sure do appreciate that offer. Vol. Up & Vol. Down button with ODIN open and Then plugging in USB got me to download mode. heh I pushed Master Clear, so we'll see what happens.

THANKS!
I figured that out right before you posted it! you Canadians are alright. lol
I would give you a thanks, but I can't find the button for you!
clemmie said:
fire up ODIN 1-CLICK
connect USB to Computer
remove battery from phone
replace battery
hold down both volume buttons
insert micro USB into phone
*DOWNLOAD MODE!*
Click to expand...
Click to collapse

Been about 15 mins since hitting Master Clear phone still says Downloading... Do not turn off target. I forget, having only flashed once to the leaked, does it usually take this long?

ConeyKiller said:
Been about 15 mins since hitting Master Clear phone still says Downloading... Do not turn off target. I forget, having only flashed once to the leaked, does it usually take this long?
Click to expand...
Click to collapse
you cannot be in the download mode if you just want to do a master clear. boot the phone normally, enable the debug mode and do the master clear using odin there.

No it shouldn't. Another thing that helped was to install the driver package that is included in the Original Post for 1-click. If that still doesn't work after 5 or so minutes, unplug and try again, but this time just go for the ROM flash. You should see the blue status bar moving on the phone. I had the same issue. This took me a few tries.

well odin now says Removed! like i'm supposed to celebrate. phone still says downloading.. lol I guess I should have hit START instead.

Thanks so much clemmie. phone is back to stock you can master clear in download mode, just takes 20 mins. lol I hit start instead and it put me back to the stock jf6. now time to get froyo wee! thanks alot guys, thread can be closed and deleted if you would like.

[q] help w/ captivate????

ok guys i'm definitely a noob at this but i think i messed up this morning downloading the gb drivers for my captivate. i was running serendipity 6.4 and i was trying to flash serendipity VII. i didn't flash back to stock 2.1 eclair with odin one click before i followed the instructions on downloading the new drivers for the gb. i went to the power menu on the 6.4 and hit download mode and plugged in the usb. it went halfway through the downloading process and stopped. my screen was blank without the downloading sign anymore and on odin it was at a halt. i waited for about 45 minutes for it to proceed and nothing so i unplugged it. when i did the factory recovery screen came up and i could use the volume up and down buttons to scroll through the menu choices but it wouldn't let me use the power button to make a selection at all like the power button wasn't working. i pulled the battery and put it back in after a while and now all i get is the galaxy s gt-i9000 samsung screen and nothing else. it wont let me back into recovery or download mode no matter what button combo i try. did i brick my phone and is there a way for me to fix this without having to buy another one? any help would be greatly appreciated.( guys, i realized i messed up shortly after it was done and messed up that i should've odin one clicked it back to factory before i did this,but by that time it was too late.)

When a problem comes along, you must jig it!
You might want to look into buying/making a jig to get you to a place where you can repair your phone.

ok guys,the phone will let me get back into the recovery menu and but won't let me make a selection out of the menu with the power button and i still get the galaxy s screen but nothing else.

Please use more descriptive thread titles. Your title is useless to anyone doing a search.

440hsp said:
ok guys,the phone will let me get back into the recovery menu and but won't let me make a selection out of the menu with the power button and i still get the galaxy s screen but nothing else.
Click to expand...
Click to collapse
Could you please quote/reply to these steps to getting into download mode?
From powered-off state, Hold V+/V-, insert USB cable
With battery out, Hold V+/V-, insert USB cable
From powered-off state, Hold V-, press & hold power button
If you haven't tried this combo yet, try using the home softkey in place of the power button with some of these combos - there have been reports of the power button getting remapped to the home softkey.

i apologize for the wrong topic but i have tried every way possible that is listed on xda and other forums to get into download mode with no luck. the only way i could is from the menu's on the roms that i had flashed before( cognition 4.5.3 and serendipity 6.4). i got it to work one time with the hold the vol. up and down buttons and the power button and inserting the battery and it never worked again. all i get is the charging symbol now,the galaxy s screen, or recovery screen. i did get it back into recovery and i tried the home soft button and nothing. then i hit the menu soft button and now it shows the android man and the exclamation point in the triangle. what can i do guys???

440hsp said:
i apologize for the wrong topic but i have tried every way possible that is listed on xda and other forums to get into download mode with no luck. the only way i could is from the menu's on the roms that i had flashed before( cognition 4.5.3 and serendipity 6.4). i got it to work one time with the hold the vol. up and down buttons and the power button and inserting the battery and it never worked again. all i get is the charging symbol now,the galaxy s screen, or recovery screen. i did get it back into recovery and i tried the home soft button and nothing. then i hit the menu soft button and now it shows the android man and the exclamation point in the triangle. what can i do guys???
Click to expand...
Click to collapse
Just out of curiosity, when you're at the android man/exclamation screen, if you have odin up already and plug in the phone, does it recognize that the phone's attached?
If so, you might be able to use the odin one-click to get back to stock eclair.

i will try that and get back to you. hopefully it will work.

no sir. i plugged it in and the computer lets me know that i plugged in the usb but nothing registers on odin or the phone.

440hsp said:
no sir. i plugged it in and the computer lets me know that i plugged in the usb but nothing registers on odin or the phone.
Click to expand...
Click to collapse
Hmm... I've reached the end of things I know to say to try. I'm assuming you've tried changing which port you're plugging your phone into on the computer?
Also, have you tried using adb to reboot to download? If not, get adb and use the "adb reboot download" command (I think...) to see if that gets you there. You may need to be in the recovery menu (if you can get back there), or the exclamation point / android guy might work, too.
Although, if you can get back to recovery, you might be able to mount your phone to the computer, drop a copy of CWM on there and reinstall that so you can have more options available to you.
Your best bet at this point might be to buy or build a jig. That should hopefully make the phone go into download mode so that you can get to where you need to be.

ok, now i'm a little confused. i've been sitting here with my phone in my pocket not messing with it. i pull it out of my pocket and it was off. i held the down volume button and the power button at the same time and it immediately started showing download mode. now i'm not near my computer with odin on it to flash it back to stock. lolol. this is depressing. now all i can hope is i can make it back to my computer before my battery runs out. i say this because my phone has always been hard to use the button combos to get it into download mode.

if i can get odin to flash it back to stock,i'll master clear it. question is should i root it again before flashing the GB bootloaders to install serendipity VII?

440hsp said:
if i can get odin to flash it back to stock,i'll master clear it. question is should i root it again before flashing the GB bootloaders to install serendipity VII?
Click to expand...
Click to collapse
Nope, root isn't needed to flash that ROM.

440hsp said:
ok, now i'm a little confused. i've been sitting here with my phone in my pocket not messing with it. i pull it out of my pocket and it was off. i held the down volume button and the power button at the same time and it immediately started showing download mode. now i'm not near my computer with odin on it to flash it back to stock. lolol. this is depressing. now all i can hope is i can make it back to my computer before my battery runs out. i say this because my phone has always been hard to use the button combos to get it into download mode.
Click to expand...
Click to collapse
Good to hear there's a glimmer of hope. If you do manage to get there, you might want to make an EFS backup before moving any further, just so you have one more tool in your arsenal of preventing phone problems.

After reading this whole thread I think your problem is that you now have gingerbread bootoaders and your button combos have changed and you don't know it.
Sent from my SAMSUNG-SGH-I897

i think you may be right about having the GB bootloaders. now first question is how to i manage to make an efs back up? secondly, if i have the GB bootloaders then what do i do to flash the complete serendiptiy VII onto the phone? the reason why i ask is because the phone just quit downloading the flash in the middle of the download and that's when all hell broke loose. lolol. but you guys are right. i might just have a glimmer of hope.

If you do have the GB bootloaders, you should (theoretically) be able to get to download mode with the volume - & power button combination. This may take a little fiddling to find a timing after you've started the phone to find out when you can get to it.
As far as flashing Serendipity, you could try, but my advice would be to try and get to stock Eclair first and then go forwards. You're in a place with a lot of variables, and stock Eclair would be as variable-free as you're likely to get.
As far as backing up the EFS, under the CWM recovery menu, there's an option to make a nandroid backup. That's step 1. Once you've made the backup, just copy it from the clockworkmod folder to a safe place.

well i've got an update now. got everything back to factory 2.1 eclair and then i did a master reset in the phone because now i can't get into the recovery menu or the download menu and one click root will not work on my phone now at all. it keeps saying failed.

440hsp said:
well i've got an update now. got everything back to factory 2.1 eclair and then i did a master reset in the phone because now i can't get into the recovery menu or the download menu and one click root will not work on my phone now at all. it keeps saying failed.
Click to expand...
Click to collapse
--------------------> delete

+1 on the jig...odin is very finicky and a jig will get you to download mode when you need it most...
buy or make one...worth every penny.

[Q] I think I bricked my Captivate flashing Serendipity

I had Cognition 4 flashed but had a problem that whenever the battery was removed when the phone was on, about half of my apps, wifi, and texting would force close on reboot and never be able to open until I reflashed Cogntion. Because of this, I decided to try Serendipity VII. I put the zip file on my phone, rebooted into recovery, then tried to do the same thing that I did for Cognition. When I did this it said that it was installing, then said install complete without rebooting. I decided to reboot the phone, and when I tried, it keeps looping on the att screen. I do not see the battery charge signal when I plug it in. I see a loading gear for the battery for about five seconds, then the screen has electric looking blue lines flash through the center and then nothing. I cannot boot into recovery or download, it just keeps looping on the ATT screen.

Make or buy a jig to force it into download mode.
Sent from 234 Elm Street

slow_DC4 said:
Make or buy a jig to force it into download mode.
Sent from 234 Elm Street
Click to expand...
Click to collapse
How do I force it into download mode?

So you tried flashing a GB rom without first flashing GB bootloaders?
You should have read and followed the installation instructions on the Serendipity download page. Start Odin one click,see if you can get phone into download mode by any combo and see if Odin sees it. Flash stock and start again.
*If you're not on Gingerbread, you should be shot*

cappysw10 said:
So you tried flashing a GB rom without first flashing GB bootloaders?
You should have read and followed the installation instructions on the Serendipity download page. Start Odin one click,see if you can get phone into download mode by any combo and see if Odin sees it. Flash stock and start again.
*If you're not on Gingerbread, you should be shot*
Click to expand...
Click to collapse
Ya, I had a feeling I should have read more about it, but I was anxious and stupid. I didn't do any of those things. No matter what I try I can't get to recovery. How would I get into download?

JIG
10 char

Thanks for all the help, I will be buying a jig from amazon for about ten bucks. I hope this works. But if it doesn't, at least this will teach me to read instructions before doing something that I don't understand very well.

to get into download mode press volume down instead of volume up to get u into recovery, at first i screwed up too somewhat like you so what i did is removed the battery for a minute, put it back in press volume down middle and power button to get into download then use odin to flash a new 2.3.4 gingerbread that u can get from this forum just look through and ull find it, make sure u put the pit file phone file, pda and csc files and make sure u check the repartition auto reboot and freset time checked on then press start hope it helped

srkoza said:
to get into download mode press volume down instead of volume up to get u into recovery, at first i screwed up too somewhat like you so what i did is removed the battery for a minute, put it back in press volume down middle and power button to get into download then use odin to flash a new 2.3.4 gingerbread that u can get from this forum just look through and ull find it, make sure u put the pit file phone file, pda and csc files and make sure u check the repartition auto reboot and freset time checked on then press start hope it helped
Click to expand...
Click to collapse
Ya, holding the volume button in any combination does noting, I hope a jig will fix it. But thanks anyway

jmj45 said:
Ya, holding the volume button in any combination does noting, I hope a jig will fix it. But thanks anyway
Click to expand...
Click to collapse
Sir try this one last thing, remove your USB Cable from your PC, remove your battery...
While holding down both (Up and Down) volume buttons, insert the battery and THEN connect your phone to your PC through USB, see if this puts it into Download mode.
If not, try doing the same just holding down the DOWN volume button. Hope this helps, it seems as if these combinations kind of vary from phone to phone. Cheers

Mr. Janderson said:
Sir try this one last thing, remove your USB Cable from your PC, remove your battery...
While holding down both (Up and Down) volume buttons, insert the battery and THEN connect your phone to your PC through USB, see if this puts it into Download mode.
If not, try doing the same just holding down the DOWN volume button. Hope this helps, it seems as if these combinations kind of vary from phone to phone. Cheers
Click to expand...
Click to collapse
I tried this and all it did was do the att loop screen thing. Also, my computer dinged that it saw a usb device being plugged in, but then the restart loop restarts the phone and continues this indefinitely. Thanks for the help anyway.

You don't need to buy a jig, just go do that thing where you get three (or four) resistors in series that totals 301k ohms and touch them to specific contacts in the usb port of your phone... look it up on xda, it's worked for most people.

abmicyau said:
You don't need to buy a jig, just go do that thing where you get three (or four) resistors in series that totals 301k ohms and touch them to specific contacts in the usb port of your phone... look it up on xda, it's worked for most people.
Click to expand...
Click to collapse
Thanks, but I already screwed up my phone by doing something that I did not fully understand, it's a small wonder that I can use Linux and not be too confused. I think I will take the easy way out with this one.

Hmm I remember that often when I tried to put my phone into recovery mode or download, whenever I held the Power Button down, it would just keep looping. When you but the battery on and connect your phone, make sure you are not holding the Power button, just the volume ones. Perhaps it is your case?

Mr. Janderson said:
Hmm I remember that often when I tried to put my phone into recovery mode or download, whenever I held the Power Button down, it would just keep looping. When you but the battery on and connect your phone, make sure you are not holding the Power button, just the volume ones. Perhaps it is your case?
Click to expand...
Click to collapse
It loops if whether or not I hold any buttons down. If I hold the power button down while trying to get into download mode, then it just turns it off.

Turn off the phone, remove the battery, get a stock odin one click for the captivate.
I897UCJF6-final-OCD-REV0 seems to be a reliable flash when I run into trouble.
Start odin, plug the phone into the USB cable, hold the volume up/down key or try any combination up/down or both. Insert the battery and hopefully it will go into download mode.
Been reliable so far...

Hi. I'm unable to get into recovery mode after I flashed the Talon kernel as per the instructions here.
http://www.team-continuum.net/forum...ses/(guide)general-installation-instructions/
I'm consistently able to get into download mode and reflashed the talon 0.1.2 kernel as per the instructions there, but still to no avail. Any other suggestions to get my phone into CWM ?
Im trying to flash Continuum 6

Might as well get the Jig easy Download mode xD. I made mine myself cost a whole $2.50 for one xD