I opened this app (battery booster, can't post link because I am new) after downloading it excited to hoping it was better then a previous one I was trying that seemed to do next to nothing.
I saw the brightness button and hit it. It showed 11%. I was like oh I thought I had this all the way down...so I use the scroller to take it all the way down assuming 0% meant that it was the lowest it could possible dim the screen...well it sure is a battery saver considering I can't even see my screen as its completely BLACK...............................
1. Why would you even allow something like this in a app.
2. Please help me fix it...
I have tried for about an hour to assume where the scroll down, and mounting the phone to my computer so that I could possibly uninstall it via computer with no luck...
anyone????!
I don't want to piss you off or anything, but I had read a comment on another thread saying they could never get it to come back, even when they went back to stock.
You may need to head down to the Verizon store :/
chronster said:
I don't want to piss you off or anything, but I had read a comment on another thread saying they could never get it to come back, even when they went back to stock.
You may need to head down to the Verizon store :/
Click to expand...
Click to collapse
son of a...this is so stupid! What a bad feature to have in a app for idiots like myself apparently
if you have adb debugging you might be able to fix it...
http://forum.xda-developers.com/showthread.php?t=785603&highlight=horror
If you have usb debugging on, you can use adb to delete the app you downloaded I think. Did you have it enabled?
Florynce said:
If you have usb debugging on, you can use adb to delete the app you downloaded I think. Did you have it enabled?
Click to expand...
Click to collapse
I didn't have debugging on i checked via adb and long story short...i was still within 30 days of purchase ;-)
All may not be lost!!
If you're still in your 30 days take it back and exchange it.
If not, try booting into recovery mode and reset the phone. I don't think you need root to do that much and it should put the phone back to the way it was when you took it out of the box.
Hold down the volume button so that you are pressing both up & down volume at the same time (easiest to do with the battery cover off).
While holding the volume keys down press and hold the power button too. When the Samsung screen comes up release both buttons. A couple seconds later you will see the "Android system recovery" screen.
Press the volume down button until you have highlighted "wipe data/factory reset".
Press the "Home" button to select it.
You will then be told to press the volume up button to wipe the phone or press the volume down button to exit/cancel. Press volume up and follow any additional instructions. That's as far as I go to guide you (I want to keep my stuff as is ).
If that doesn't take care of the issue then you should take it to verizon and tell them what happened. Good luck and let me know if this worked for you!
~Johnny
Related
my damaged nexus one screen has progressed to the point of a black screen all the time... i didnt think of it before the screen died, but i am a bit stumped as to how i now reset to clear all my data? i cant see anything on the screen, but the phone still has my google account linked to it.
doh! :-(
reason i want it cleared: may send in for repair and i dont want others to get my info, or i may have to send to insurance company for payout (they said to hang on to phone for now) and i dont want them to see my info, or may sell damaged unit if insurance doesnt pay and i dont want those folks to get my info either.... see the problem?
You can try this. Did a google search.
http://www.droidforums.net/forum/droid-general-discussions/28793-how-do-full-adb-wipe-help.html
thanks for the link...would work if id had debugging enabled before the screen died... adb wipes require debugging mode.
any other suggestions?
There's this:
http://code.google.com/p/androidscreencast/
But if you don't have Debugging enabled and can't get it to register when you hit "adb devices" you're probably effed. I don't know much about touch screen engineering, though. Does it still respond to touch as far as you can tell, or is the screen completely dead when the OLED display stops working?
This serves as a good warning for others, though. ALWAYS MAKE SURE USB DEBUGGING IN SETTINGS > APPLICATIONS > DEVELOPMENT IS CHECKED. There's really no good reason I can think of that would ever make you want to leave this unchecked, and this is an example of when it would come in very handy.
cant you use the clear storage function by booting while holding volume down, waiting 5 seconds, then pressing volume down 3 times followed by a press of the power button?
flybyme said:
cant you use the clear storage function by booting while holding volume down, waiting 5 seconds, then pressing volume down 3 times followed by a press of the power button?
Click to expand...
Click to collapse
is this a commonly known sequence ? if so, please link to a list of all the known boot-up key combos. thanks
Kiserai said:
There's this:
http://code.google.com/p/androidscreencast/
But if you don't have Debugging enabled and can't get it to register when you hit "adb devices" you're probably effed. I don't know much about touch screen engineering, though. Does it still respond to touch as far as you can tell, or is the screen completely dead when the OLED display stops working?
This serves as a good warning for others, though. ALWAYS MAKE SURE USB DEBUGGING IN SETTINGS > APPLICATIONS > DEVELOPMENT IS CHECKED. There's really no good reason I can think of that would ever make you want to leave this unchecked, and this is an example of when it would come in very handy.
Click to expand...
Click to collapse
the digitizer still accepted touch input as screen beneath began to fail. colors bled from the cracks and the images began to imprint in the screen... within a few hours, it was completely illegible, and then the next morning, it appeared as a dysfunctional unit with a non working screen.
i will try and methods suggested, but i have no way to verify success... thanks for the sequence.
well when you boot by holding power, your given options FASTBOOT, RECOVERY, CLEAR STORAGE, SIMLOCK
Heres the exact key combination
Boot phone using Volume Dn + Power
Wait 5-10 seconds to be safe
Press Volumn Dn twice
Press Power Btn
Press Volume Up
Phone should reboot after 5 seconds
i will try that... confirmation of success will be the charging LED turning off and then back on again?
nexusonemeover said:
i will try that... confirmation of success will be the charging LED turning off and then back on again?
Click to expand...
Click to collapse
of the reboot? ya. i cant imagine doing this without the screen lol. Sorry i couldnt be more help
You could also probably flash a PASSIMG.zip from the bootloader. That will overwrite all partitions so it should make it 100% stock.
It might be harder to do without the screen than the clear storage function though.
flybyme said:
of the reboot? ya. i cant imagine doing this without the screen lol. Sorry i couldnt be more help
Click to expand...
Click to collapse
tried the method... and i think it worked... i cant verify, but thanks for the help guys.
You can easily verify that by sending yourself an email and see if your phone can get the notification of that new email (by trachball or sound).
So I was attempting to flash back to stock with Odin (I was using Assonance 5.2). I turned the phone off, then while holding the volume buttons plugged in the USB like normal. Then Odin said added the phone, then I hit start. And it seemed like it was working just fine, then all of a sudden the screen on the phone turned red. Then the status bar on Odin stopped moving completely (stayed for awhile). So I think I made the next big mistake of just disconnecting the USB and taking out the battery. So now the phone won't turn on. So I'm not sure I hard bricked the phone or what? Anyone have any idea? Thanks!
I've plugged the phone into the outlet charger, still nothing happens. This happened like maybe 15 min ago. No action when plugged in the computer or charger. Can't even boot into recovery I don't think. the power button was giving me some trouble earlier today. whenever I was trying to wake the phone up, it seemed to take a few clicks of the power button to wake the phone. This happened only after I flashed Assonance 2.5, so I wanted to flash to an earlier version of the rom. thanks!
What you want to do is get into Download Mode, and flash with Odin One-Click JF6 to get your phone working again..
Have you tried all the various button combos to get into Download Mode? .
If the button combos don't work, you can always try to build/buy a JIG which will force your phone into Download if it's still possible on your phone.
I've tried to get into download mode, but can't seem to do it. I've tried holding the volume up and down button then plugging in the usb (which didn't work). then i tried the taking the battery out, then holding the volume up and down button and power button, then plugging in the usb, then reinserting the battery, then taking my hand off the power button (which didn't work). what is the JIG method?
edit. ok i have no clue wtf just happened, but i am currently in download mode using odin and flashing back to stock.....this is just too weird.....sooo any rom suggestions?
Look in my signature for an example of a JIG.
norcal einstein said:
Look in my signature for an example of a JIG.
Click to expand...
Click to collapse
cool i'm actually gonna go ahead and get one this things......JUST in case of future screw ups that don't have a happy ending
i clicked on the link but it won't let me go the page. below is the message it gave me.
marefin, you do not have permission to access this page. This could be due to one of several reasons:
Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.
marefin said:
cool i'm actually gonna go ahead and get one this things......JUST in case of future screw ups that don't have a happy ending
Click to expand...
Click to collapse
Definitely a great idea having the jig. Nor cal can attest to the late night save that jig provided me.
Sent from my SGH-T959D using XDA App
So here is the situation:
My power button is non-functional. This happened before, and I was able to press very firmly on the power button to access a shut down menu and turn off the phone. From this, I was able to enter download mode (pressing volume button while inserting USB) and go back to stock, which surprisingly, fixed my power button. I thought this nightmare was over.
Now, my power button has stopped working again (ICS hacksung 5.0). No matter how much pressing, prodding, whatever, I cannot get the power button to turn off the phone.
I cannot find any adb commands to turn off phone.
"adb reboot download" simply restarts the phone, no download mode. (adb does recognize the device)
If I take out the battery, as soon as I put it in the phone boots up.
If I am pressing any of the volume buttons when I put the battery in, I can access recovery mode (But cannot select anything because power button is still broken)
Any ideas? I doubt my phone is still under warranty (1.4 years old) and I do not have mobile insurance.
Thanks for any help in advance
Depending on what recovery u have (cwm or ?), U can use the capacitive buttons, while in that revovery, to navigate and select the power off option.
Sent by XDA Premium App
Thats a neat tip that I didn't know about, but I can't find any option to power off? Sorry for being retarded but I have given this time I promise
cwm recovery is what I have installed atm
Reboot to CWM and Power off option may be at the bottom of the 1st screen that u come to. That is dependent on what version of cwm u have though.
Quick boot from the market, you can place a poweroff button directly on the home screen
Sent from my SAMSUNG-SGH-I897 using xda premium
The ICS ROMS CWM recovery doesn't have power off choice, so he can't do that.
Sent from my SGH-I897 using xda premium
Unfortunately the quick boot "power off" option simply froze my phone, or restarted it.
I let my battery drain so that I could get a dead phone (that part worked), but when I hold my volume buttons and plug in the USB for download mode it goes to the "battery" screen or (if both are held down) recovery. No download mode.
In recovery "key test" the power button fails to register any key press, but it is not spamming either. This seems like a hardware problem, but I am not sure how it was fixed when I flashed back to stock before if that is the case
I will next try making a download mode jig, I'll let you guys know how it goes...
My cousin had the exact same problem less than a month ago.
I see you tried reboot download through adb, have you tried it using the same command, but using android emulator from market? That worked for her phone so worth a shot.
its a far shot but odin is now available for use on the phone itself and works on our phones. maybe you can find a kernel thats had the buttons reconfigured. i know darky has one somewhere.
StaticMatt said:
My cousin had the exact same problem less than a month ago.
I see you tried reboot download through adb, have you tried it using the same command, but using android emulator from market? That worked for her phone so worth a shot.
Click to expand...
Click to collapse
Thanks for this idea, when I use
#su
#reboot download
the phone simply reboots. Same thing happens in "Quick Boot" 's "Bootloader" reboot option. This phone just seems broke as hell.
Firstly, this power button problem is a lot more common than you would think. It is most often a hardware failure - I mean the button mechanism (springs etc. just dies). Google it to see how common.
Your post suggests a clue: If just putting the battery in reboots the phone, then the power button may be stuck in the "in" position.....so it is always getting "pushed". Then anything you do would mean ht epower button is already being pressed. If this is the case, you will never get a software solution ???
Also, I absolutely do not mean to be nasty. But if you search both Q&A and General sections there are previous threads with this button problem. Many other solutions have been posted and it will be difficult to list them together.
Finally, you can actually replace - yes, replace - the button yourself. Google/you tube has it.
http://www.globaldirectparts.com/Samsung-Captivate-i897-Replacement-Repair-Parts-s/6412.htm
http://forum.xda-developers.com/showthread.php?t=1206459
Hope this helps !
Power everything was working this morning
Noticed that my power button wasn't working...the screen stayed on. Pulled battery, put it back in and the phone booted without pressing power.
Was like "wtf?"
When it booted, I couldn't turn off the screen.
So I just left the battery out and took it home.
Put a new rom on phone, thought "This will fix it."
Wrong.
Had to flash using Rom Manager because in recovery the power button doesn't respond.
When it began to boot "AT&T Screen" wouldn't disappear and show me some Doc's v4.
I can manipulate it to boot into recovery but the power button doesn't work still.
I can NOT get it to go into recovery.
Can someone helps me?
bunnsguy said:
Power everything was working this morning
Noticed that my power button wasn't working...the screen stayed on. Pulled battery, put it back in and the phone booted without pressing power.
Was like "wtf?"
When it booted, I couldn't turn off the screen.
So I just left the battery out and took it home.
Put a new rom on phone, thought "This will fix it."
Wrong.
Had to flash using Rom Manager because in recovery the power button doesn't respond.
When it began to boot "AT&T Screen" wouldn't disappear and show me some Doc's v4.
I can manipulate it to boot into recovery but the power button doesn't work still.
I can NOT get it to go into recovery.
Can someone helps me?
Click to expand...
Click to collapse
have ODIN open, and battery removed from phone... hook up usb, hold both vol keys, while inserting battery... you should get download mode fine even with a busted power button... what you do next is up to u....
Once more, I can NOT get it to boot into recovery in that fashion.
I cannot place batter in the phone without it attempting to boot
(doesn't not get past the AT&T boot screen)
I cannot plug it up, hold volume buttons and then put in battery because it will just charge. If I unplug the phone, the phone still thinks it's charging actually.
My question really is Can I 'fix' the power button, or can I reboot it into download mode through command propt? I've never used ADB to access my phone, so that'll be new.
bunnsguy said:
Once more, I can NOT get it to boot into recovery in that fashion.
I cannot place batter in the phone without it attempting to boot
(doesn't not get past the AT&T boot screen)
I cannot plug it up, hold volume buttons and then put in battery because it will just charge. If I unplug the phone, the phone still thinks it's charging actually.
My question really is Can I 'fix' the power button, or can I reboot it into download mode through command propt? I've never used ADB to access my phone, so that'll be new.
Click to expand...
Click to collapse
Dude... recovery is useless right now, you have a busted power button... and because of 'said busted power button', none of what you're trying to do is going to work... like youve said...
You are down to trying to force download mode with USB cord, holding the vol keys, and inserting the battery... ADB cannot run commands to a phone stuck at the boot screen... Thread title says, how to reboot to download, and with the button like it is, all you can do is what i've posted...
As to fixing the power button, i don't see why that's not possible... do u feel it press at all?
B-Naughty said:
As to fixing the power button, i don't see why that's not possible... do u feel it press at all?
Click to expand...
Click to collapse
Yeah, it 'presses' and 'clicks'. I mean it worked most of the day, it got low on power and it just quit working.
Any luck forcing download by puttin the battery in while the usb is hooked up with the vol keys pressed in?
I was having the same problem with my power button and eventually the power button stopped working completely even though i could still hear it click. I sent it to mobiletechvideos and they fixed it really fast and it was a great price.
Here's the link: http://mobiletechvideos.mybigcommerce.com/samsung-captivate-power-button-repair/
B-Naughty said:
Any luck forcing download by puttin the battery in while the usb is hooked up with the vol keys pressed in?
Click to expand...
Click to collapse
goes into boot-loop like if I were holding the volume up/down and the power together. That's what doesn't make sense.
j.curtis.369 said:
I was having the same problem with my power button and eventually the power button stopped working completely even though i could still hear it click. I sent it to mobiletechvideos and they fixed it really fast and it was a great price.
Here's the link: http://mobiletechvideos.mybigcommerce.com/samsung-captivate-power-button-repair/
Click to expand...
Click to collapse
And I could buy another used Captivate for $50. I have an upgrade in less than 3 weeks and this happens
It happened to me once before after flashing a bad kernel. I just did what B-Naughty had suggested. Remove battery -> plug in USB -> hold both volume buttons --> then insert battery. Put me right in download mode and Odin it back with a working power button. Unless it's really a hardware problem, then you're out of luck...
bunnsguy said:
And I could buy another used Captivate for $50. I have an upgrade in less than 3 weeks and this happens
Click to expand...
Click to collapse
Oh in that case imo i would get another used captivate and wait for the sgs 3
Maybe if I went to a store and sucked up to them they'd let me upgrade a month early (especially since I was initially supposed to upgrade in October)
Might be down to getting/making a USB jig if it don't come up... but if you upgrade to gs2, the jig will work for that model as well so won't be wasted...
B-Naughty said:
Might be down to getting/making a USB jig if it don't come up... but if you upgrade to gs2, the jig will work for that model as well so won't be wasted...
Click to expand...
Click to collapse
Maybe a jig would work. But easier, funner solution is adding a line for a Moto Atrix 1 for just a penny plus the $36 fee. Problem solved. Thanks for the help for what could just be a hardware failure. I'll upgrade my other line later when the SGS 3 comes out
Okay so my power button just randomly stopped working after some random time. it doesnt work ANYWHERE. to lock my screen, to unlcok my screen, in recovery mode i cant press anything cuase it doesnt WORK. i no its a hardware issue becuase of this. i did google this but found nothing. what can i do to fix it.
i tried a battery pull and putting it back and going to recovery to factory reset but as soon as i put my battery in my phone starts up. i can enter recovery but the power button doesnt work so i cant press anything.
my warranty is over by a long shot ( had it since it released) so cant return it.
any help would be appreciated. all i need is a way to turn my phone on and off nothing about the recovery and stuff. but if you do find someting for it that would be even more amazing.
and has this happened to anyone else, just wondering is all if this is common or rare.
thnx in advance.
it has happened to many captivates. search 'captivate power button' on xda.
What ROM are you running on your phone?
Answer to that question has a lot to do with your next steps for software workaround.
One approach; you could read up on ways to clean the power button and see if that works. Or send it off to mobiletechvideos.com and he will fix it for a reasonable fee.
laughingT said:
it has happened to many captivates. search 'captivate power button' on xda.
What ROM are you running on your phone?
Answer to that question has a lot to do with your next steps for software workaround.
Click to expand...
Click to collapse
i am running Aocp 5 android 4.2.1
hve been running it for a few weeks now and no problem till now
Okay, start by seeing if you can clean the power button, that may fix it for now. Again, search 'captivate power button' to find some threads about ways to clean it.
With the ROM you are running, I believe you have a version of CWM that allows to use the Cappy's dedicated menu keys, menu, home, back and search, to navigate and select recovery items.
Assuming your power key is stuck on, remove the battery, hold the up and down volume buttons and reinsert the battery to get into recovery. This will allow you to test keys, wipe, and any other function in CWM.
With the phone on and fully booted into JB, go find volume rocker wake in the system setting options and make sure it is active. Hitting the up/down key will wake the screen when it sleeps. Add the sleep/lock toggle to your notification bar menu and you have a way to instantly lock the screen without the power key.
If you still have a bad power button stuck in on position, then you will need to take out the battery to turn it off.
Hope this helps.
laughingT said:
With the ROM you are running, I believe you have a version of CWM that allows to use the Cappy's dedicated menu keys, menu, home, back and search, to navigate and select recovery items.
Click to expand...
Click to collapse
Thnx for the help but Which button does what?
Menu = Down. Home = Up. Back arrow = Back. Search = Select.
This is the way it is in KK4 Corn Kernel. Not sure about the recovery in AoCP though... Home may = Select. ??
Sent from my SAMSUNG-SGH-I747 using xda premium
THANK YOU!!!!!!
4-2ndtwin said:
Menu = Down. Home = Up. Back arrow = Back. Search = Select.
This is the way it is in KK4 Corn Kernel. Not sure about the recovery in AoCP though... Home may = Select. ??
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
THANK YOU BOTH (4-2ndtwin AND laughingT) SOOOOO MUCH
IF I HAD THE CHANCE I WOULD DONATE TO YOU BUT I CANT CUZ IM ONLY 14
SRY.
No prob. Glad to help.
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
No prob. Glad to help.
Click to expand...
Click to collapse
+1
Now to turn off phone?
I hope im not bothering you or anything but is there a way to turn off the phone. As i said before i cant remove the battery and put it back in because the phone automatically restarts. Is there a way to turn the phone off with out taking out the battery?
thnx again.
Jack Jake said:
I hope im not bothering you or anything but is there a way to turn off the phone. As i said before i cant remove the battery and put it back in because the phone automatically restarts. Is there a way to turn the phone off with out taking out the battery?
thnx again.
Click to expand...
Click to collapse
Get a app or widget for it.
Jack Jake said:
I hope im not bothering you or anything but is there a way to turn off the phone. As i said before i cant remove the battery and put it back in because the phone automatically restarts. Is there a way to turn the phone off with out taking out the battery?
thnx again.
Click to expand...
Click to collapse
This is happening because your power button is stuck in the on position. Did you try to clean it as suggested earlier.
BWolf56, I'm not aware of an app or ROM that completely prevents power up on insertion of battery when the power button is stuck on. If there is such an app, I'd like to hear about it. I think maybe the power switch goes to the broadcom power management chip, so I don't understand how the app could work unless the phone never came on at all. SOD symptoms would be the result.
laughingT said:
This is happening because your power button is stuck in the on position. Did you try to clean it as suggested earlier.
BWolf56, I'm not aware of an app or ROM that completely prevents power up on insertion of battery when the power button is stuck on. If there is such an app, I'd like to hear about it. I think maybe the power switch goes to the broadcom power management chip, so I don't understand how the app could work unless the phone never came on at all. SOD symptoms would be the result.
Click to expand...
Click to collapse
Oh that would be impossible, the OS isn't loaded so even less the apps
I was suggesting a app to turn off the phone/lock screen. There are widgets for that in the market.
Jack Jake said:
Okay so my power button just randomly stopped working after some random time.
Click to expand...
Click to collapse
I had a very similar problem with my Epic 4G Touch (Sprint S2) - my phone would randomly reboot, and it kept getting worse and worse. Thought it was the ROM, the overclock, etc. I flashed back to (almost) stock, went back to original clock speeds. Eventually, I noticed that even brushing past the power button would wake the screen, and about 10 seconds later the phone would reboot.
Long story short, I bought a replacement power switch, soldered it in place, and have had zero problems since!
Several eBay sellers offer the switch you'll need.
(They don't include the skills needed to solder it in place. It's a tiny switch - about 4mm x 2mm x 1.5mm, and you'll need a good quality fine-tipped soldering iron and a steady hand. Do you have a friend who's good at soldering?)
awoolf said:
Long story short, I bought a replacement power switch, soldered it in place, and have had zero problems since!
Click to expand...
Click to collapse
well thanks for the reply, but i dont need it anymore. my friend conveniently had a GNex (old) and gave it to me as a present. so i dont use my captivate that much anymore.