Database Develop

How to update user.conf

Without adb. I have searched but can't find a straight forward answer.
Thanks

This should be asked in the Q&A section.

Here is what I would do:
1. Download "Text Editor" from the market.
2. Open Terminal Emulator and run the following:
Code:
su
cp /system/sd/user.conf /sdcard/user.conf
exit
exit
3. Open Text Editor and then open the user.conf file.
4. Make modifications and save.
5. Open Terminal Emulator and run the following:
Code:
su
cp /sdcard/user.conf /system/sd/user.conf
reboot
From that point on, you will have a copy on your sdcard and can
make changes and follow step 5 to copy it back to where it needs
to be.
Vermithrax

try with SU'FBS~

JACxHERO 2.1
trying to do this method on my mt3g.....i have user.conf in the system/bin
and i did your method and when i try to copy it back over into bin its say read-only file? any ideas?

You need to mount /system with read and write access in terminal. Try the following commands:
su
mount -o rw,remount /system
cp /sdcard/user.conf /system/bin/user.conf
reboot
This will reboot after you copy the file over.

How to install ubuntu on the Droid 4

How to install ubuntu on the Droid 4
Note to mods: this thread is a branch off of this thread
Huge thanks to zacthespack for creating the ubuntu installer app and original boot script and to zeroktal for modifying the script to work on the D4 and helping me get it working on my device.
I decided to take my experience in setting this up and put it into a how-to so that others could enjoy the experience of having ubuntu on the Droid 4. If zackthespac or zeroktal have any problems with me making and putting this guide up, please let me know and I will remove it.
Knowledge Required:
working knowledge of command line
working knowledge of vi
OR the ability to learn how to use both
Tools Required:
A rooted Motorola Droid 4
BusyBox (Android Market)
Terminal Emulator (Android Market)
Android VNC Viewer (Android Market)
Ubuntu Installer App (Android Market)
zeroktal's ubuntud4.zip file (attached to this post and mediafire)
Vi Cheat Sheet (lagmonster.org)
Step by Step:
Install BusyBox, Terminal, and Android VNC Viewer
Install and run Ubunutu Installer App
Follow the on-screen instructions and click next
Download either the Small or Large image to your phone, (use zeroktal's ubuntud4.zip file instead of the boot script provided in the guide) after the image downloads (will take a while because the file is HUGE) click next
For this screen, the instructions differ from the app.
1. With your D4 plugged into your PC in USB Mass Storage, create a directory (folder) called ubuntu in the EXTERNAL sdcard's root*
2. Extract the image you downloaded to that directory
3. Download and extract the attached .sh (ununtud4.zip) to that directory
4. Disconnect your phone from your PC
5. Open terminal and run the following commands:
su [ENTER]
mount -o remount,rw,exec,suid /dev/block/vold/179:1 /mnt/sdcard-ext [ENTER]
cd /mnt/sdcard-ext/ubuntu [ENTER]
sh ubuntud4.sh [ENTER]
960x540 [ENTER]**​If you get an error message: ubuntud4.sh: 45: syntax error: end of file unexpected (expecting "then") see troubleshooting section below.​killall -TERM Xtightvnc [ENTER]
vncserver :1 -geometry 960x540 [ENTER]**​6. Open androidVNC app and enter the following settings:
Nickname: Anything you want
Password: ubuntu
Address: localhost
Port: 5901
Color Format: 24-bit color (4 bpp)
7. Hit connect
8. Hit your menu soft button and then set input mode to touchpad
9. You have ubuntu on your Droid 4!
To "shut down" ubuntu:
press the menu button, select disconnect in VNC
In terminal type this command 3 times (terminal will close itself when you are done):
exit [ENTER]
To "start up" ubuntu again:
Follow steps 5-8 above
Troubleshooting:
If you get the error message: ubuntud4.sh: 45: syntax error: end of file unexpected (expecting "then") you are about to have fun with vi at the command line.
Do the following from inside terminal:
su [ENTER]
cd /mnt/sdcard-ext/ubuntu [ENTER]
vi ubuntud4.sh [ENTER]​If you see ^M or ^ at the end of any line (remember to scroll all the way to the right to see the end of long lines) remove it. once you do that, everything should work just fine. (See the Vi Cheat Sheet above for help with Vi)
Note: Vol Up + E is [ESC] by default in this terminal emulator
Notes:
* It does not have to be on the external SD, but if you put it on the internal SD you will have to modify things as needed-- if you dont know what needs to be changed, just put it on the external SD.
** Screen size can be whatever you want it to be, but 960x540 is the size of the D4 screen.
*** This is a fairly involved process... especially when it comes to editing the .sh file in vi things can get very frustrating and hard, but just take your time and you will get it. As always, doing anything with root access on your phone, especially on the command line has risks. I am not responsible if anything goes wrong with your phone... proceed at your own risk!

greekchampion04 said:
Notes:
* It does not have to be on the external SD, but if you put it on the internal SD you will have to modify things as needed-- if you dont know what needs to be changed, just put it on the external SD.
** Screen size can be whatever you want it to be, but 960x540 is the size of the D4 screen.
*** This is a fairly involved process... especially when it comes to editing the .sh file in vi things can get very frustrating and hard, but just take your time and you will get it. As always, doing anything with root access on your phone, especially on the command line has risks. I am not responsible if anything goes wrong with your phone... proceed at your own risk!
Click to expand...
Click to collapse
I actually got it up and running on my internal sdcard partition. Pretty much just have to modify the Mount remount command, and a few lines in the script.
Here's the original command
Code:
mount -o remount,rw,exec,suid /dev/block/vold/179:1 /mnt/sdcard-ext
And the modified one
Code:
mount -o remount,rw,exec,suid /dev/block/vold/179:57 /mnt/sdcard
Only things you have to change are the device location(179:57) and mount location(drop the -ext after sdcard)
Now, after that you also have to modify the script a bit. Just go through it, and anywhere that you see sdcard-ext, drop the -ext off the end.

thanks for putting that up for everybody! like i said, if you know what you are doing its not a hard swap to make.

Is anyone else getting just a gray screen when they remote in? What could be causing this?

i had that same problem at first... did you use zeroktal's ubuntud4.zip file? or did you use the ubuntu.sh file included in the app?

I used the sh file included. I did however fix the problem, when mounting at the start i confused vold with void. I did not get the file system mounted properly. This method does work!! however I am currently trying to get bash on my droid to replace sh as the shell. I've checked the forums but have not found anything yet about someone installing bash on the droid 4. With no way for nandroids I feel i should wait before I kill sh.
Sent from my DROID4 using XDA App

If you mod your init.sh in your root directory to the following, your vnc will work on startup without issue. It will also shutdown vnc on exit.
#!/bin/bash
#############################################
# Asks User to screen size and saves as REZ #
#############################################
#echo "Now enter the screen size you want in pixels (e.g. 800x480), followed by [ENTER]:"
#read REZ
##############################################
# Pick which desktop environment to use, this#
# is done by having a xstartup file for each #
# desktop, then renaming the one you want to #
# use to 'xstartup' before boot #
##############################################
echo "Please select which Desktop environment you want to use, type the number to select it then press [ENTER]"
echo "1 - LXDE"
echo "2 - Gnome"
echo "Make your Selection:"
read DESKTOP
if [ $DESKTOP == 1 ]
then
mv /root/.vnc/lxstartup /root/.vnc/xstartup
fi
if [ $DESKTOP == 2 ]
then
mv /root/.vnc/gxstartup /root/.vnc/xstartup
fi
###########################################
# Tidy up previous LXDE and DBUS sessions #
###########################################
rm /tmp/.X* > /dev/null 2>&1
rm /tmp/.X11-unix/X* > /dev/null 2>&1
rm /root/.vnc/localhost* > /dev/null 2>&1
rm /var/run/dbus/pid > /dev/null 2>&1
############################################################
# enable workaround for upstart dependent installs #
# in chroot'd environment. this allows certain packages #
# that use upstart start/stop to not fail on install. #
# this means they will have to be launched manually though #
############################################################
dpkg-divert --local --rename --add /sbin/initctl > /dev/null 2>&1
ln -s /bin/true /sbin/initctl > /dev/null 2>&1
###############################################
# start vnc server with given resolution and #
# DBUS server, (and optionally an SSH server) #
###############################################
dbus-daemon --system --fork > /dev/null 2>&1
/etc/init.d/ssh start
vncserver :1 -geometry 960x540
echo
echo "If you see the message 'New 'X' Desktop is localhost:1' then you are ready to VNC into your ubuntu OS.."
echo
echo "If VNC'ing from a different machine on the same network as the android device use the 1st address below:"
##########################################
# Output IP address of android device #
##########################################
ifconfig | grep "inet addr"
echo
echo "If using androidVNC, change the 'Color Format' setting to 24-bit colour, and once you've VNC'd in, change the 'input mode' to touchpad (in settings)"
echo
echo "To shut down the VNC server and exit the ubuntu environment, just enter 'exit' at this terminal - and WAIT for all shutdown routines to finish!"
echo
###############################################################
# Spawn and interactive shell - this effectively halts script #
# execution until the spawning shell is exited (i.e. you want #
# to shut down vncserver and exit the ubuntu environment) #
###############################################################
/bin/bash -i
#########################################
# Disable upstart workaround and #
# kill VNC server (and optionally SSH) #
# Rename used xstartup to its first file#
#########################################
killall -TERM Xtightvnc
/etc/init.d/ssh stop

Also save the follow lines between ### as remount.sh on your system partition. Then chmod 755 /system/remount.sh. Now you can just run run from a terminal /system/remount.sh and voila it remounts correctly and starts ubuntu(with the above fixes). Im still working on the unmounts.
####### for the internal sd card
mount -o remount,rw,exec,suid /dev/block/vold/179:57 /mnt/sdcard
/mnt/sdcard/ubuntu/ubuntu.sh
######
OR
####### for the external sd card
mount -o remount,rw,exec,suid /dev/block/vold/179:1 /mnt/sdcard-ext
/mnt/sdcard-ext/ubuntu/ubuntu.sh
#######

great stuff!

feel free
Feel free and take, modify, repost or edit anything I touch.

QUESTION:
After I delete all the ^M and ^ what do i do next? I try to hit the command ":x" to exit and save changes but it just creates another line. Also when I press VOL UP + E to escape nothing happens.

PhanTuhC said:
QUESTION:
After I delete all the ^M and ^ what do i do next? I try to hit the command ":x" to exit and save changes but it just creates another line. Also when I press VOL UP + E to escape nothing happens.
Click to expand...
Click to collapse
In vi, the command to save and exit is :wq (probably short for write and quit).

remember, read up on the vi quick-reference guide: http://www.lagmonster.org/docs/vi.html

OK I fixed it but now its not letting me connect with androidVNC. All the settings entered is correct but when I try to connect it says:
"VNC connection failed!" localhost/127.0.0.1:5901 - Connection refused"

ok, i've gone thru this a few times (slowly and deliberately) and must be missing something...the directions seem pretty straightforward! here's what i know...
busy/terminal/vnc are all installed
small 2.5gb image is unzipped in /sdcard-ext/ubuntu directory
the attached .sh file from page 1 is in the same directory
i removed all ^M using vi
but when I try sh ubuntud4.sh i get an error...
"mkdir failed for /data/local/mnt/ubun, No such file or directory"
(plus a few other errors)
should the directory be "ubun" or "ubuntu"? am I typing something incorrectly?

copy and paste new script
Copy and paste the new scripts I posted. They will fix your problem. Remember to use the remount script from /system/ the rest will work perfectly if you are root. I'll check back later on your progress.

Ok, well I started from scratch (deleted both .img and .sh files) and it's still not working.
I have all the apps installed (and yes rooted, SU works just fine)
I used Ubuntu Installer app to download the image zip (tried both the large and small img)
I downloaded the .sh file from the first post
The /sdcard-ext/ubuntu/ folder now has two files: "ubuntu.img" and "ubuntud4.sh"
All ^M characters have been removed from .sh file
Still no joy...
Ideas? What am I missing?
In terminal, I can set SU permissions and the mount/cd commands work just fine...it's the last sh command that spits out a bunch of errors about not being able to create/find the directories.
I'm going to format the sdcard and try again...any help is appreciated.
Update: Even after re-formatting the SD and following the steps exactly, no luck!

Did you remember to remount the sdcard with exec and suid permissions?

Andbuntu will work much better than this method. It works on every single phone with modification to the "environmental variables".
http://code.google.com/p/andbuntu/
Follow the directions in the script to make the process much easier than the first post.
instructions:
generate an image with rootstock on an ubuntu computer.
put it on /sdcard/ubuntu/ubuntu.img
run the script on your phone with "sh /path/to/script"
Here is the script. http://andbuntu.googlecode.com/svn/trunk/uboot
Also, run "firstRun" to make things like terminals work properly.

Adamoutler: That didnt work for me. The permissions were incorrect on the mounted partitions.
Sent from my DROID4 using XDA App

[Q] Graffiti for Android

Has anyone gotten Graffiti for Android working? I found the apk online and put it in /system/apps but that didn't seem to pop up the option in keyboard settings in Nook Color Tools

If your Settings.apk does not have it, you have to manually enable an IME.
For instance, to add my NullKbd.apk
Code:
# cd /data/data/com.android.providers.settings/databases
# sqlite3 settings.db
sqlite> update secure set value='com.android.inputmethod.latin/.LatinIME:[b]com.temblast.nullkbd/.NullKeyboard[/b]' where name='enabled_input_methods';
sqlite> .q
#
If you have sqlite3 on your Nook you can do it in place.
If not, do an ADB pull, sqlite3 on your desktop, ADB push.

Renate NST said:
If your Settings.apk does not have it, you have to manually enable an IME.
For instance, to add my NullKbd.apk
Code:
# cd /data/data/com.android.providers.settings/databases
# sqlite3 settings.db
sqlite> update secure set value='com.android.inputmethod.latin/.LatinIME:[b]com.temblast.nullkbd/.NullKeyboard[/b]' where name='enabled_input_methods';
sqlite> .q
#
If you have sqlite3 on your Nook you can do it in place.
If not, do an ADB pull, sqlite3 on your desktop, ADB push.
Click to expand...
Click to collapse
That's pretty cool.. didn't work for me though. Probably because I don't exactly know what the package name is. (extracting it gave me gibberish). In any case, it turns out the the solution was really simple..
1.put the apk in system/app
2. reboot
3. select keyboard from nook color tools
It was step 2 I was missing.

You can install keyboards as a regular app, you don't need to put them in /system/app
To find an activity or service name:
Code:
ls -l /data/app
That gets you the package name.
To get the trailing part (the activity or service) you can use apktool d and look at AndroidManifest.xml

Getting rid of the emulated CD drive and unknown devices in MTP mode [Partial Fix]

When you connect your MIUI device to the computer through USB in File Transfer (MTP) mode (that is, not in Photo Transfer), it also emulates a CD-ROM drive. The ISO image for the fake CD contains a copy of Mi Assistant, a device management tool for the PC, which is in Chinese only and can be downloaded from the Internet anyway. Basically, it's all useless and mildly annoying.
View attachment 3137500
Here's what you need to do to get rid of it:
Step 1. Edit /system/build.prop and add the line:
Code:
persist.service.cdrom.enable=0
Step 2. Edit /init.qcom.usb.rc and where it says:
Code:
on property:sys.usb.config=mtp
(a) Change the first line to remove mention of mass_storage (this is for the CD only):
Code:
write /sys/class/android_usb/android0/functions mtp
(b) Remove these two lines:
Code:
write /sys/class/android_usb/android0/f_mass_storage/lun/ro 1
write /sys/class/android_usb/android0/f_mass_storage/lun/file /data/miui/cdrom_install.iso
Similarly, where it says:
Code:
on property:sys.usb.config=mtp,adb
(a) Change the first line after the above to:
Code:
write /sys/class/android_usb/android0/functions mtp,adb
(b) Remove these two lines:
Code:
write /sys/class/android_usb/android0/f_mass_storage/lun/ro 1
write /sys/class/android_usb/android0/f_mass_storage/lun/file /data/miui/cdrom_install.iso
Step 3. Delete the ISO image file to free up some space.
File location: /data/miui/cdrom_install.iso
And here's how to do it:
Using Android Debug Bridge from the command line:
Code:
adb root
adb shell "mount -o remount,rw /system"
adb shell "echo persist.service.cdrom.enable=0 >>/system/build.prop"
adb pull /init.qcom.usb.rc
Now use your favorite editor to make changes as described above in step 2.
Code:
adb push init.qcom.usb.rc /
adb shell "mount -o remount,ro /system"
adb shell "rm -f /data/miui/cdrom_install.iso"
adb reboot
Using ES File Explorer:
Download from Play Store or the developer's website. Install. Open. In context menu (hold leftmost button for 1 second), switch Root Explorer to On (this will fail). Go back to the home screen. Open Security, Permissions, Root Access. Put the switch next to ES File Explorer to On. Now you can switch back to ES File Explorer, and follow the steps 1-3 above. Use the built-in editor the make changes in the files.
Unknown USB devices when connected in MTP mode
When your device is connected in MTP mode (File Transfer) there are 3 unrecognized USB devices. To check if you have them too, go to Control Panel and choose Device Manager or run mmc devmgmt.msc from the command line (screenshot 1). The devices appear to have no hardware IDs (screenshot 2) and their class number seems to be {c897b31c-e8d2-59e9-a212-ccf0962fe102} (full registry dump provided as attachment).
View attachment 3137478 View attachment 3137479
This problem appears to be caused by the CD-ROM emulation as well: the number of devices will actually increase to 4 when it's switched off following the instructions above, which means there must be one extra step to get rid of it completely. This doesn't seem to cause any problems and the issue appears to be purely cosmetic. If I have time to investigate it further, I will report the conclusions back here. Meanwhile, if anyone has an idea what the cause is, please feel free to share it (might also be a driver issue).
Disclaimer: there might be some mistakes in what I wrote. Please use at your own discretion. This should work with a "developer" stock ROM out of the box, otherwise you'll need to set-up root access first.

Update for a total fix, and a more elegant approach
So the missing link to make the mysterious devices disappear is to edit /init.qcom.usb.rc and where it says:
Code:
case "$cdromenable" in
0)
Comment out (put the # sign) in front of:
Code:
#echo "" > /sys/class/android_usb/android0/f_mass_storage/lun0/file
The best way to make the whole change seems to be to unpack boot.img, for example with Android Image Kitchen, apply the patches (diffs attached), rebuild the image, and flash it. The persist.service.cdrom.enable=0 property can be set in /default.prop so that all the changes are contained within the boot image. In summary:
Code:
unpackimg boot.img
echo "persist.service.cdrom.enable=0" >>ramdisk/default.prop
patch ramdisk/init.qcom.usb.rc < init.qcom.usb.rc.diff
patch ramdisk/init.qcom.usb.sh < init.qcom.usb.sh.diff
repackimg
cleanup
adb reboot bootloader
fastboot erase boot
fastboot flash boot image-new.img
fastboot reboot

@ Aqq123 thanks for the write up, I have a Mi 4C and the iso file is not in /data/miui/ but it still shows up when connecting to pc

[mod][6T] init.d / services.d framework using Magisk [linux]

This thread will allow you to set up init.d (and services.d) scripts on your phone so they can run at boot time.
Prerequisites
- understanding of what "init.d" scripts mean ...
- your phone must be rooted (see https://www.xda-developers.com/oneplus-6t-unlock-bootloader-root/)
- you must have a working Magisk (see https://forum.xda-developers.com/apps/magisk)
- linux knowledge (I am not a Windows guy but instructions below should easily apply to Windows / PowerShell)
- adb knowledge
If this scares you, stop reading and go play with something else.
Attached zip file contains
- a magisk.img file
- a directory with init.d scripts
- a directory with services.d scripts
You can use the scripts provided or not use (some) of them, or write your own.
What's the difference between init.d and services.d scripts?
The idea is to have 2 directories on your phone with scripts:
Code:
/system/etc/init.d/
/system/etc/services.d/
The init.d scripts are run early in the boot (when Magisk initializes). The scripts in /system/etc/services.d/ will run a bit "later", to be precise: when sys.boot_completed = true.
Important warrning: even when sys.boot_completed = true, this does NOT guarantee that /sdcard is mounted. Your script can "sleep" until /sdcard is mounted if it relies on things on /sdcard. See for example the code in /system/etc/services.d/LS99maxvolumewarning which will show how you can do that.
Scripts in init.d should NOT rely on any of the file systems being mounted !
The framework will run all scripts in parallel. So be careful that you do not write scripts which depend on eachother!
The framework will run all scripts as background processes so that they do not hinder the normal boot of your phone.
Prepare the basic setup
To use the scripts (or your own), you must first create the directories init.d and services.d; to do that open a linux shell and do:
Code:
> adb shell
$ su
# mount -o rw,remount /system
# mkdir /system/etc/init.d/
# mkdir /system/etc/services.d/
# chown 0.0 /system/etc/init.d
# chown 0.0 /system/etc/services.d
# chmod 755 /system/etc/init.d
# chmod 755 /system/etc/services.d
# sync; exit
Putting the scripts on your phone
Download the attached zip file (initd.zip); create a directory in your linux file system and unzip, e.g.
Code:
> mkdir mydir
> cd mydir
> unzip ~/initd.zip
> adb push init.d/ /sdcard/
> adb push services.d/ /sdcard/
> adb shell
$ su
# mount -o rw,remount /system
# mv /sdcard/LS00* /system/etc/init.d/
# mv /sdcard/LS99* /system/etc/services.d/
# chown 0.0 /system/etc/init.d/*
# chown 0.0 /system/etc/services.d/*
# chmod 755 /system/etc/init.d/*
# chmod 755 /system/etc/services.d/*
# sync
# exit
$ exit
Installing the magisk image on your phone
First important remark: I need to turn this really into a proper magisk "module" but I need to study that first. Open a linux shell and do:
Code:
> cd mydir
> gunzip magisk.img.gz
> adb push magisk.img /sdcard/
> adb shell
$ su
# cd /data/adb
# mv magisk.img magisk.img.orig
# cp /sdcard/magisk.img .
# chown 0.0 magisk.img
# chmod 644 magisk.img
# sync
# exit
$ exit
That's all !!! If you now reboot your phone your init.d and services.d scripts will run.
How can I tell this is working?
Each script has a log file in /data/; whose name is LS00 (for init.d) or LS99 (for services.d) appended with the name of the script. That log file is passed as "$1" into the script and the script code can write to this log file using:
Code:
LOGFILE=$1
echo "Hi I am writing to the log" | tee -a $LOGFILE
To check that the log files are there, open a linux shell and do:
Code:
> adb shell
$ su
# ls /data/LS*
And you should see something like:
Code:
16 /data/LS00blockdev 4 /data/LS99bootclean 4 /data/LS99maxvolumewarning 4 /data/LS99sysctl
4 /data/LS00governors 4 /data/LS99callrecording 4 /data/LS99network 4 /data/LS99trimcaches
4 /data/LS00kerneltweaks 4 /data/LS99cputweaks 4 /data/LS99overlays 4 /data/LS99turnoffnightmode
4 /data/LS00procgate 4 /data/LS99enablecallrecording 4 /data/LS99remounts 4 /data/LS99workqueue
4 /data/LS00readahead 4 /data/LS99hdparm 4 /data/LS99resetprop
4 /data/LS00resetprop 4 /data/LS99magiskhide 4 /data/LS99sqlite
To check the contents of the log files, do:
Code:
> adb shell
$ su
# cat /data/LS*
And you will see logging info:
Code:
>> Starting /system/etc/init.d/LS00procgate at 19700110-17:21:12
-- remounting: mount -o remount,hidepid=2,gid=3009 /proc
<< Ending /system/etc/init.d/LS00procgate at 19700110-17:21:12
>> Starting /system/etc/services.d/LS99maxvolumewarning at 20181201-07:34:00
-- slept for 4 seconds waiting for /sdcard/Android
-- disabling max volume warning
<< Ending /system/etc/services.d/LS99maxvolumewarning at 20181201-07:33:58
What's next
Write your own scripts (and share them). Note that scripts must be owned by root (chown 0.0) and have 755 linux permissions (chmod) to run.
How does it really work?
No secrets ... magisk.img is actually a magisk module which runs the scripts. To see the inner details, do the following after you have installed the magisk image and rebooted your phone:
Code:
> adb shell
$ su
# ls -l /sbin/.core/img/template/
total 12
0 -rw-r--r-- 1 root root 0 2018-03-12 21:19 auto_mount
4 -rw-r--r-- 1 root root 935 2018-08-06 17:59 post-fs-data.sh
4 -rwxr-xr-x 1 root root 498 2018-08-05 10:11 scriptwrapper*
4 -rw-r--r-- 1 root root 2750 2018-08-11 12:07 service.sh
Magisk will run the post-fs-data.sh first and service.sh later. Check the code of both of these files to understand how init.d and services.d are ran (using run-parts). If you want more details please read: https://topjohnwu.github.io/Magisk/guides.html#scripts.
Disable ALL scripts from running
If you want to disable any script from running do:
Code:
> adb shell
$ su
# touch /data/noinitrd
To undo this and get your scripts running again, do:
Code:
> adb shell
$ su
# rm /data/noinitrd
What do my init.d scripts do?
Code:
LS00blockdev: change properties of block devices (non rotational, no kernel io stats, ...)
LS00governors: set all CPU governers (to schedutil; which is actually the 6T default)
LS00kerneltweaks: a few basic kernel tweaks + stop debug of kernel modules
LS00procgate: protections against the procgate security vulnerability (thanks to @topjohnwu)
LS00readahead: change the readahead amount on logical disk devicesw
LS00resetprop: reset model, brand, manufacturer (only useful if you would want to get your phone appear externally as a Pixel; check the code)
What do my services.d scripts do?
Code:
LS99bootclean: clean junk and log files
LS99cputweaks: improve scaling governor
LS99enablecallrecording: enable call recording (must be done at every device boot)
LS99execonce: a whole series of settings; this is only executed ONCE
LS99hdparm: increase readahead on /system and /data
LS99magiskhide: hide some packages from seeing root
LS99maxvolumewarning: remove the high volume warning (I am not sure this will always work !!!)
LS99network: TCP transmit queue and congestion control
LS99overlays: enable all overlays automatically (if you use substratum then no need to enable them manually)
LS99remounts: improve file system performance of multiple partitions
LS99resetprop: increase memory used by dalvik
LS99sqlite: REINDEX and VACCUM sqlite database files (the script only runs every 3rd day)
LS99sysctl: optimize linux kernel settings and TCP/IP performance
LS99trimcaches: trim android cache files
LS99turnoffnightmode: reset the night mode to OFF (night mode conflicts with dark mode in newer Google apps)
LS99workqueue: tune kernel work queue

Thanks man I have been trying to get boot scripts to run.

jacksummers said:
Thanks man I have been trying to get boot scripts to run.
Click to expand...
Click to collapse

excuse me for the ignorance, but what is the use of this mod?
Sent from my [device_name] using XDA-Developers Legacy app

isoladisegnata said:
excuse me for the ignorance, but what is the use of this mod?
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
At the end of OP he's got a summary of what the different scripts do.

I am stuck here > unzip ~/initd.zip
It keeps saying:
1|OnePlus6T:/mydir # unzip /initd.zip
unzip: can't open /initd.zip[.zip]
Any ideas I extracted initd to the directory where my platform tools are and where I do my system updates am I supposed to extract it somewhere else? How do I create a directory in my linux shell using windows cmd promts?

kirschdog1 said:
I am stuck here > unzip ~/initd.zip
It keeps saying:
1|OnePlus6T:/mydir # unzip /initd.zip
unzip: can't open /initd.zip[.zip]
Any ideas I extracted initd to the directory where my platform tools are and where I do my system updates am I supposed to extract it somewhere else? How do I create a directory in my linux shell using windows cmd promts?
Click to expand...
Click to collapse
Looks like a simple typo "/initd.zip" implies that the file is located in the root directory. "~/initd.zip" would be in your "home" directory. Since I don't know if "/mydir" is defined as your home directory and presuming initd.zip is located there try "unzip /mydir/initd.zip" (no quotes).

Still not working
Base2 said:
Looks like a simple typo "/initd.zip" implies that the file is located in the root directory. "~/initd.zip" would be in your "home" directory. Since I don't know if "/mydir" is defined as your home directory and presuming initd.zip is located there try "unzip /mydir/initd.zip" (no quotes).
Click to expand...
Click to collapse
1|OnePlus6T:/ # cd mydir
OnePlus6T:/mydir # unzip ~/initd.zip
unzip: can't open //initd.zip[.zip]
1|OnePlus6T:/mydir # unzip /mydir/initd.zip
unzip: can't open /mydir/initd.zip[.zip]
Any ideas? How to get this working? I tried both commands to no avail.

kirschdog1 said:
I am stuck here > unzip ~/initd.zip
It keeps saying:
1|OnePlus6T:/mydir # unzip /initd.zip
unzip: can't open /initd.zip[.zip]
Any ideas I extracted initd to the directory where my platform tools are and where I do my system updates am I supposed to extract it somewhere else? How do I create a directory in my linux shell using windows cmd promts?
Click to expand...
Click to collapse
You have to create the directory mydir on your linux machine, not on your phone.

Base2 said:
Looks like a simple typo "/initd.zip" implies that the file is located in the root directory. "~/initd.zip" would be in your "home" directory. Since I don't know if "/mydir" is defined as your home directory and presuming initd.zip is located there try "unzip /mydir/initd.zip" (no quotes).
Click to expand...
Click to collapse
No, not a typo. mydir is on your PC, not on the phone !

foobar66 said:
No, not a typo. mydir is on your PC, not on the phone !
Click to expand...
Click to collapse
How do I create the directory? I'm using a windows device using adb command prompts?

kirschdog1 said:
How do I create the directory? I'm using a windows device using adb command prompts?
Click to expand...
Click to collapse
Search how to create directories in PowerShell ... I am not a Windows guru :crying:

foobar66 said:
Search how to create directories in PowerShell ... I am not a Windows guru :crying:
Click to expand...
Click to collapse
Ok thank you.ill hold off as it appears to be above my pay grade.

foobar66 said:
You have to create the directory mydir on your linux machine, not on your phone.
Click to expand...
Click to collapse
This won't work anymore as magisk doesn't use magisk.img anymore