looking to get a different case and i'm looking for opinions.........currently i'm using the body glove but i'm looking at:
Seidio Innocase II Surface for HTC DROID Incredible, Black
or
Dragonfly Kream Cover for HTC DROID Incredible, Black
or
OtterBox Commuter Case for HTC DROID Incredible, Black
thanks for the input
I have the Seidio Innocase II and love it.
trembly01 said:
looking to get a different case and i'm looking for opinions.........currently i'm using the body glove but i'm looking at:
Seidio Innocase II Surface for HTC DROID Incredible, Black
or
Dragonfly Kream Cover for HTC DROID Incredible, Black
or
OtterBox Commuter Case for HTC DROID Incredible, Black
thanks for the input
Click to expand...
Click to collapse
I highly recommend that you get the Otterbox Commuter. I own the Innocase II and Innocase Active and the Otterbox Commuter stands above both. The Innocase II is nice if you don't care as much about durability or aesthetics, the Active is a damn good improvement over the Innocase II and provides a lot more protection and looks nice, but the buttons are difficult to push. The Commuter is very aesthetically pleasing, much more durable than any case I've held before, not noticeably thicker compared to the Active, and the buttons are so much easier to push. I used the Innocase II for ~3 months, the Active for ~4 months, and just got the Commuter by mail. I'm loving every bit of it.
Personally, the best case I've had (I've had the Innocase II as well) has been the black glossy silicone case I purchased from Verizon. It fits like a glove, looks clean and stylish, gives adequate protection to the camera, and is a bit raised on the front so the screen it protected from a fall or from a rough surface.
It's also available in a couple other colors I believe.
I used a coupon and got it 15% off for about $15 if my memory is correct.
I really was not happy with the Innocase AT ALL. Seidio's quality is progressively decreasing. Also, after a few drops, the random areas of the surface of the case start to peel off, making it ugly and removing any uniformity that existed before.
Note this was after I had to order a replacement from Seidio due to a design flaw in their product. The replacement I received was still flawed. They're just not reliable.
Just got the otterbox defender series, LOVE it
Sent from my ADR6300 using XDA App
BABABANG said:
Personally, the best case I've had (I've had the Innocase II as well) has been the black glossy silicone case I purchased from Verizon. It fits like a glove, looks clean and stylish, gives adequate protection to the camera, and is a bit raised on the front so the screen it protected from a fall or from a rough surface.
Click to expand...
Click to collapse
I agree 100% with you here. My fiancee has gone through about six cases for her Incredible and she keeps coming back to the red TPU case sold by Verizon.
I recently changed to the same black glossy TPU case you mentioned. I will never buy another type of case again. It fits tight and looks awesome!
DeaconBoogie said:
I agree 100% with you here. My fiancee has gone through about six cases for her Incredible and she keeps coming back to the red TPU case sold by Verizon.
I recently changed to the same black glossy TPU case you mentioned. I will never buy another type of case again. It fits tight and looks awesome!
Click to expand...
Click to collapse
yea i used the innocase II and it just scratched the bezel of the phone. i was excited when i read the description of the case because it said it was "lined" with a soft fabric so dirt wouldn't scratch the phone, but they only lined the back of it and not the sides. so ultimately dirt got underneath and messed up the phone.
after i realized that, i switched to the verizon case i originally bought. on one, i cut out the volume and power buttons so u were touching them directly. worked good, but my cutting wasn't as smooth as i liked so snatched my sisters black case and use that one now.
Ty07allstar said:
I have the Seidio Innocase II and love it.
Click to expand...
Click to collapse
I couldn't agree with him more, except that I bought the Rugged Combo case (which gives me the holster for the Surface II and the Rugged case and holster).
The first case I used was the Innocase II Surface. I liked it for the most part. The back pieces didn't match up quite perfectly, but it was barely noticeable and not a problem at all. My main problem was that it was so tight (considering I have a slightly thicker 1500 battery) that it would put a lot of stress on my screen protector when sliding it on or off. It eventually started to peel the top left corner off, and you know those things, once they start peeling off there's no stopping it.
I heard really good things about the Otterbox Commuter so I went ahead and ordered one of those and I'm thinking it was a mistake now. The usb port cover does not stay in. The hard outer shell is way to slippery for safety. For the amount of thickness added you would expect to be holding a phone with an exteded battery or maybe one from 3 years ago. Some people like a little bit more thickness to their phone, and were that the only issue I would probably be pretty happy with it, but all three of these things together make it seem like I got less than I expected. The inside silicone layer feels like it adds a lot of shock protection but I take pretty good care of my phones and rarely drop them. My next door neighbour has an Otterbox Commuter for his iPhone 3GS and it is worlds better. The hard shell covers all 4 sides, all the plugs fit in, and it conforms to the shape of the phone. Why they wouldn't mold this case around the shape of the phone and instead opt to make it more brick like is beyond me.
I think I'm going to sand down some parts on my old Innocase II Surface and try it back out again.
I use a Red HTC silicone glove. Fits very snug, bought it from best buy after trading in some old ass games, they still take xbox games unlike gamestop. Cost $30 but minus the $24 trading in 6 games. $6.... best buy takes trades for almost every electronic now...
Sent from my ADR6300 using XDA App
seidio is great, i have it
nothing competes with seidio innocase II... nothing
Yeah, I got a Seidio Innocase as well. Fits very well and has protected my phone properly from 2 drops so far. Feels great and doesn't feel like it adds too much bulk or weight. You should get it too.!
Look up Case-Mate Tough Case. Double layer protection is the best and it looks better than any of the other ones.
Sent from my Incredible using XDA App
I bought an Otterbox defender series case. It's nice but not worth the money. I'll buy another Otterbox case for my next phone but may try the commuter series case instead.
Sent from my ADR6300 using Tapatalk
BABABANG said:
Personally, the best case I've had (I've had the Innocase II as well) has been the black glossy silicone case I purchased from Verizon. It fits like a glove, looks clean and stylish, gives adequate protection to the camera, and is a bit raised on the front so the screen it protected from a fall or from a rough surface.
It's also available in a couple other colors I believe.
I used a coupon and got it 15% off for about $15 if my memory is correct.
I really was not happy with the Innocase AT ALL. Seidio's quality is progressively decreasing. Also, after a few drops, the random areas of the surface of the case start to peel off, making it ugly and removing any uniformity that existed before.
Note this was after I had to order a replacement from Seidio due to a design flaw in their product. The replacement I received was still flawed. They're just not reliable.
Click to expand...
Click to collapse
Same here. Granted...this is my 1st and only case I have for my Inc, I like the look and feel of the vzm silicone/rubber case. I may try an otterbox though.
For the price.. go with my el cheapo case in my sig!
I've used the Otterbox Commuter ever since it came out and I love it. Thinking about upgrading to the Defender series though but I think it may add too much bulk. I didn't have a back door for my phone for over a month and my otterbox held my phone together literally. It is WELL worth the price. I've dropped this phone hard enough to smash it into pieces and thank god i had an otterbox on it that prevented that, plus if they break it's a free replacement
I bought a cheap, hard-rubbery case from Verizon at my local store. It works great, but I honestly hardly ever use it. I'm surprised my phone still works. I drop it at least 3 times a week from decent heights (out of my truck onto asphalt or from my lap to the tile floor).
Dincs are surprisingly very durable.
I do however have a screen protector.
ksidirt said:
I bought a cheap, hard-rubbery case from Verizon at my local store. It works great, but I honestly hardly ever use it. I'm surprised my phone still works. I drop it at least 3 times a week from decent heights (out of my truck onto asphalt or from my lap to the tile floor).
Dincs are surprisingly very durable.
I do however have a screen protector.
Click to expand...
Click to collapse
I forget the exact price of a DInc but it's somewhere between $300-$400. spending $40-$50 on an Otterbox that will keep it from breaking for sure is worth it, not to mention Otterbox will replace the cover if it breaks and pay for your phone too I think. Just my opinion. I am not risking my phone with a cheap Verizon cover.
Related
Currently, I have a Body Glove on my Inc, and I'm really looking to find a more slim fit case. Mainly I need something that will protect the camera, but keep the slimness of the phone there.
I was thinking of the Incipio Feather, or the Case Mate Barely There...but I can't find any reviews on them.
Thanks guys
I have the Incipio Feather and let me tell you it is definitely the slimmest I've ever seen. It gives VERY little protection except for maybe preventing the back and two sides from scratches. You absolutely cannot lay the phone face down since it doesn't extend up past the glass. I actually bought one just to make a car mount with it. I glued a Garmin windshield mount onto to back of it and it works really really well for this, since the phone can be inserted / removed from the Feather quite easily, yet it is secure. When I get into the car I just snap it in and go!
If it's minimal you want go for the Feather. I currently use the Seidio Innocase II Surface when I'm outside the car, and the quality / protection is great while still being not bulky. I've tried about 5 or 6 and settled on the Innocase.
Cheers
+1 for the Seidio Innocase II. I've had mine for about a week now and I really like it. It's only 1.1 mm thick. Might be just what you're looking for.
Hmm, I had Seidio for my Storm, but that was a few years ago. The case ended up breaking on me. It was the Innocase 360. How is the build quality of the Innocase 2?
I have the Innocase II and it scratched up the border of my phone. Pretty dumb case, if you ask me.
Seidio HTC Droid Incredible ADR6300 Innocase II Surface...has been an awesome case for me as well...good luck
I'm using the Innocase II also. It's been a great case so far. Not perfect, but it's slim and seems to protect my phone pretty well. I'd love an Otterbox that was this thin somehow.
my speck case from verizon came in, slim and protects the camera, and is raised about .1 mm so you can lay the screen down..no bulk.
http://www.amazon.com/Protector-Protects-Scratches-Incredible-Installation/dp/B004GZSXQI/
Wow...I never knew those existed!
I have the Case-Mate "Barely There" case and I love it. I spent like 2 months being indecisive because I wanted something that wouldn't make my phone bulky while still providing protection without shattering like some thin cases (I've dropped it 2 or three times now and its protected my phone every time). I also wanted a decent amount of grip on the case but not to the point where it grabs the inside of my pocket like some gel cases. It also sits almost perfectly flush with the camera lens in the back, providing some protection from the glass being the first thing to hit a surface every time you put the phone down.
The Incipio Feather case looks almost identical to the barely there case but people seem less confident in it's ability to actually protect the phone if it is dropped..
I've also heard a lot of people complain about the Innocase's scratching their phone, which seems counter productive...
Just my two cents considering you seem to want the same features I wanted in a case.
I use the Innocase, and I dropped my phone on the street, and it landed on the very corner of the phone. Figured it was a goner but it actually did a great job. Love the thin case.
Wow! Case-Mate looks amazing!! I might buy it
I've got the Seidio Active and i love it. Dropped the phone tons and not a scratch. Protects the camera lens well too.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSR6HDDN-BK
Big +1 for the Innocase Surface. Very solid, great soft touch exterior and nice padding inside. Not the absolute thinnest but adds very little bulk and has a very low profile bezel around the screen, unlike some cases which make it hard to hit buttons near the edge of the screen.
I previously had the Rocketfish case that Best Buy pushes on everyone. Got it thrown in for free with the phone after bullying the rep into throwing in some freebies. Glad I didn't pay for it! The soft touch coating started to peel off after about ten days, one edge kept coming open and when I did drop the phone just once, the case completely popped off. Complete $hit if you ask me.
boomboxgneration said:
The Incipio Feather case looks almost identical to the barely there case but people seem less confident in it's ability to actually protect the phone if it is dropped..
.
Click to expand...
Click to collapse
Been in the feather about a month now. Several drops, although nothing too extreme, and so far so good. Love the barely there feel!
I was lucky enough to get a seidio case for 10 bucks and out of 5 cases its the best one yet
Innocase is def awesome. I love it.
r3dlined said:
http://www.amazon.com/Protector-Protects-Scratches-Incredible-Installation/dp/B004GZSXQI/
Click to expand...
Click to collapse
Just got mine in the mail. I will upload pics as soon as I get my new battery door in the mail (tomorrow?)
Innocase surface here too....I agree it is the best combination of low profile/good protection I have seen. It doesn't interfere with wiping near the screen edge at all, but keeps the screen from touching a surface if u lay it down face down. Kinda feels like the actual incredible to the touch as well. I did a ton of research and am very happy. Thanks to everyone in this forum - ur input was super helpful in researching a case.
Sent from my ADR6300 using XDA App
I am buying a case tomorrow, and I was wondering, should I get the BodyGlove case or the Speck Candyshell
I have never seen a bodyglove case I liked. So I guess the other.
I had that Body Glove case and it was garbage. I've never seen that Speck case, but I wouldn't think it could be any WORSE than the BG one.
i have the speck candyshell and the plastic on the back scratches SO easily. there are scuff marks all over mine just by leaving it on a table. it's also pretty bulky
I have the Speck CandyShell, I like it, but then again I've always liked Speck cases. Have one on my MacBook, iPod touch, iPad, and Droid Inc.
+1 on the bodyglove being garbage. It has six tiny tabs on the corners and left and right sides and one drop is almost guaranteed to break at least ONE tab off and then it's all down hill from there. I reccomend going with a Seidio Surface or Active Case
I have the rugged which is basically like an Active case. It's an older model and it's STILL holding together with no problems and I drop it quite frequently. Not too much thickness added either. Actually fleshes the phone out quite nicely if you ask me.
I also recommend Seidio. I love mine, I have the surface.
Their cases are high quality, very protective, and shockingly secure. They are also extremely form fitting, only adding a few mm to the width of the phone. They are by no means bulky.
I have been contemplating getting an active instead, simply because I like the extra shock absorbance it gives. I believe both the active and the surface have holster options as well.
The Otterbox is garbage durability-wise, and extremely bulky. The Candshell is also fairly cheap quality.
Body glove is a waste of money. If you drop it once the whole case is broken
frostincredible said:
I have the Speck CandyShell, I like it, but then again I've always liked Speck cases. Have one on my MacBook, iPod touch, iPad, and Droid Inc.
Click to expand...
Click to collapse
Ok. Im probably gonna order the SpeckCandy Shell on monday. Its a hard case right?
Look at one of these. They're all one piece, and it fits like a glove. I've had bad experiences with Seidio cases, having had 3, all scratched grooves into my devices I had them on (iPod Classic, iPod nano, iPod Touch) I recommend against them.
I also had the Body glove and I hated it. I bought it because the one I had on my Blackberry Curve was good. The Incredible one was garbage.
I had the Seidio Innocase II on mine and like it but wanted a belt clip. So I moved on to the Otter Box Defender. I love the defender. It is a 3 piece case with belt clip. It does attract dust but overall I think it does a great job and Otter Box customer service is top notch.
Just some food for thought
I can vouch for the Body Glove being a sacrificial case, unfortunately I myself prefer the screen-out belt holster style cases and this is the only one I've found. I stocked up on a sale and bought a couple right at $3 a pop.
One drop and one of the required 6 minuscule clips will almost certainly break.
rosser725 said:
Ok. Im probably gonna order the SpeckCandy Shell on monday. Its a hard case right?
Click to expand...
Click to collapse
Yes it's a hard case.
As stupid as this is, I just went into the Verizon store and bought this, and another case (the other case is a leather one). I didn't feel like waiting lol.
I want a case for my Incredible, that doesn't make it feel so bulky. Something light and thin yet offering decent protection.
What's the best option here? Seidio Surface? Griffin Reveal?
ZealotOnAStick said:
I want a case for my Incredible, that doesn't make it feel so bulky. Something light and thin yet offering decent protection.
What's the best option here? Seidio Surface? Griffin Reveal?
Click to expand...
Click to collapse
I got a 'speck' case recently from Verizon's site for $5. Its been in a few threads on this site. Very protective and doesn't feel bulky. Those seido ones look way too big, and they're expensive.
Sent from my ADR6300 using XDA App
I just purchased a Seidio Innocase from amazon and it looks great and is not bulky. I carry it around in a hip case which my old otterbox didnt fit in.
Just got the Seidio Active case, but may not be what you're looking for.
I don't think it's bulky just because I already think our phone is too slim and too difficult to hold comfortably; it adds 2.2mm to depth of phone.
This may be what you're looking for:
http://www.youtube.com/watch?v=U4hK8IdPmU4&feature=player_embedded
i ordered the seidio rugged combo, comes with innocase and belt clip, i like it better than the otterbox defender, less bulk, solid and secure feel, and if you dont want the added bulk, you can just remove the "rugged" case and use the provided innocase..expensive but great buy, 2 cases in 1...
I have the Otterbox Commuter Case and it's perfect for me. The Defender series is like a tank comparatively.
<br></div></div>
I have the Seidio Surface case and I don't even notice a difference thickness wise. Seidio advertized it only adds 2mm to the phone's thickness.
Chernyi said:
I have the Seidio Surface case and I don't even notice a difference thickness wise. Seidio advertized it only adds 2mm to the phone's thickness.
Click to expand...
Click to collapse
Seidio is awesome. I have the ACTIVE Blue.
I got it off of amazon a bit cheaper than the Seidio site, but totally worth it!
POQbum said:
Just got the Seidio Active case, but may not be what you're looking for.
I don't think it's bulky just because I already think our phone is too slim and too difficult to hold comfortably; it adds 2.2mm to depth of phone.
Click to expand...
Click to collapse
Kinda like trying to handle that bar of soap that's been used down to about a quarter of an inch thick... Personally I liked the Body Glove case. My only gripe about it was the lip around the face of the phone was too big. It made using the full qwerty impossible and down actions on the track pad difficult. Good luck finding one though. The stores that have them keep them right next to the chicken teeth.
I too have the Seidio Surface case. It's great. Very slim, yet it offers protection to the camera lens.
I just got the seidio active case and i like it also its not bulky to me and it fits the phone really good.
I use the Incipio Feather case. It sounds like exactly what you're looking for. Decent protection and so slim you almost don't even know its there.
Sent from my ADR6300 using XDA App
hey do you all use a screen protector with your phones? I dont like screen protectors, but went with the barely there case and got scratches because it went face down once.
Gorilla* said:
hey do you all use a screen protector with your phones? I dont like screen protectors, but went with the barely there case and got scratches because it went face down once.
Click to expand...
Click to collapse
used to use one but not anymore. My screen shattered with one on and I never got a scratch before (6 months of having it and dropping it, sliding it face down).
Replaced the screen for $30 and now I don't use one because it's a hassle that I don't need.
It's useful for a lot of people though.
High Gloss Silicone
The Verizon High Gloss Silicone case is inexpensive, protects well, and add just enough thickness to protect the camera lense. My phone bounces when dropped onto concrete, but still slides easily in and out of my pocket.
(Search Youtube for "HTC Incredible High Gloss Silicone Case")
jimlange said:
The Verizon High Gloss Silicone case is inexpensive, protects well, and add just enough thickness to protect the camera lense. My phone bounces when dropped onto concrete, but still slides easily in and out of my pocket.
(Search Youtube for "HTC Incredible High Gloss Silicone Case")
Click to expand...
Click to collapse
+ 1.
Had shipped from Verizon for less than $10. It's what you are looking for. This is the case I have now after the speck case. Very light weight. Speck was nice, just turns from red to salmon after a while.
http://www.androidcentral.com/look-verizons-silcone-case-accessory-htc-droid-incredible
Sent from my ADR6300 using XDA App
I use the otterbox commuter. It adds some much needed depth to my phone, as I love the dInc, but its too thin for me to hold comfortably. The added depth also has the pleasant side effect of protecting the camera lens. Its over a year old and there's not a scratch on the camera lens; only scratches on it are 2 corners nicked from a drop (cleaning the phone without the case on it) and some minor pocket rash on the screen.
My speck case makes my phone indestructible
Sent from my ADR6300 using Tapatalk
eckwheet said:
+ 1.
Had shipped from Verizon for less than $10. It's what you are looking for. This is the case I have now after the speck case. Very light weight. Speck was nice, just turns from red to salmon after a while.
http://www.androidcentral.com/look-verizons-silcone-case-accessory-htc-droid-incredible
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
+1. -- I've had this case since I've had my phone (brought case for $20 at that time) and I love this case. Doesn't at any weight or bulk to the phone. Phone is easy to take out of phone, does not get stuck like the other 'rubber' cases. Protects the phone very well, ports and buttons are accessible. Case is very easy to put on the phone and remove as well. I love it!
There two different Cases, the Active case & Surface case.
Does anyone have any of the two? I'd like some thoughts about the cases
because I'm most likely to jump into one of these cases, since I think ballistic
cases are too big & bulky but I had the infuse 4g so that had something to
do with it too =P
-Edit-
Seido Holster case
Here's an even better case, it's almost the same price, and it comes with a kickstand.. i wish i saw this before i purchased the pt holster case ):
I got the Seidio Surface.
Very beautiful case. Its very thin, believe its just 1mm thick.
Feels very nice to the touch, easy to put on... easy to take out.
Nice access to all buttons.
However, since its so thin and all that stuff, not sure its good for protection. Probably just minor? I got it more for aesthetics reasons because I love that sapphire blue.
However, still offers some protection over not having a case, but obviously less than a more bulky case like my old Case-Mate Pop.
Basically, everything about the surface feels and looks nice.
Thank you! I want to get the Surface one too because I mainly just want the holster.. the case is just an added bonus lol.. the fact that it looks very simple and doesn't add too much bulk is a plus to me too
Just an FYI, but Best Buy sells the exact same case as the Surface Combo. It is branded for Best Buy but it is the same. It is an excellent case IMO.
Hey thanks for the heads up.. i did check into it and saw how similar they both are.. i might just end up buying it since shipping might take a while. Thank you
Sent from my LG-P925 using XDA App
Just got the platinum series with holster from bestbuy. Its a great case, does not add too much bulk. The front edges are slim so it does not interfere when you slide your fingers. And I got it for 30 dollars it was initially 35 but if you get a best buy rewards card they will do a 20% discount
I agree its a really nice case
Sent from my LG-P925 using XDA App
DevJackey said:
I got the Seidio Surface.
Very beautiful case. Its very thin, believe its just 1mm thick.
Feels very nice to the touch, easy to put on... easy to take out.
Nice access to all buttons.
However, since its so thin and all that stuff, not sure its good for protection. Probably just minor? I got it more for aesthetics reasons because I love that sapphire blue.
However, still offers some protection over not having a case, but obviously less than a more bulky case like my old Case-Mate Pop.
Basically, everything about the surface feels and looks nice.
Click to expand...
Click to collapse
I have the surface case with kickstand and holster combo like the one in the ebay link above. Just two nights ago i dropped my thrill out of my truck window doing 55mph and it only scratched the corners of the whole case and around the kickstand. i had just got the phone replaced due a manufacturing defect so i thought i was screwed and just destroyed my phone. thankfully it is still in mint condition because of the case.
So I've ordered and received the following 2 cases for my M8 so far:
SUPCASE Unicorn Beetle Premium Hybrid Protective
Aduro Shell Holster Combo Case
I'm not completely happy/unhappy with either one, so I've gone ahead and ordered the following cases:
Minisuit Clipster Kickstand Case - This one looks identical to the Arduro case but is $3 cheaper. If I decide to keep it, even after I ship back it will be the cheaper option.
HTC M8 One 2 Puregear Kickstand Case Holster Combo - This one looks very similar to the Arduro/Minisuit, but I'm hoping the shell covers a bit more and/or the holster might be good with one of the other covers.
Seidio Surface Case with Metal Kickstand and Holster Combo
Otterbox Defender Series
Spigen Capsule Clear
i-Blason Prime Series Dual Layer Holster Cover with Kickstand and Locking Belt Swivel Clip
SUPCASE Premium Hybrid Protective Bumper Case
I'm not planning on writing complete reviews because it would be too time consuming, but I would be happy to answer any questions that anyone has.
I have preferred SEIDIO cases in the past with the holster combo. I had those on my HTC Tilt and my first Droid 2 - which was lost at an airport when I think a piece of luggage pulled the whole thing from my belt when I lifted it. Apart from that experience (which I blame myself for as much as anything), I'd been happy with SEIDIO...the Tilt survived a motorcycle accident that totaled my bike, but the phone was fine. SEIDIO was pretty expensive though, so I went through 2 or 3 much cheaper rip-offs (sans holster) over the last couple yeats of my phone.
I think the traditional SEIDIO rubberized cases provided a good balance of protection without being too incredibly bulky.
I'm caught at an impasse now with the M8 because it is such a nice looking phone I'd like to show it off with more of a light and clear case. OTOH, I have a 2 year old that I'd like to protect it from. Also, the M8 is much bigger than the phones I've had in the past (height and width wise, thickness is actually thinner) - so I'm not sure how a thick case will influence my carrying it around.
I think the best solution for me may be a case that provides protection somewhere in-between a TPU and a Otterbox (i.e. middle ground) and ideally be able to fit into some holster. I feel that the holster is necessary due to the size of the phone in a jeans front pocket - especially if a case is grippy and hard to get out.
Anyway, the above thoughts are how *I* will be judging the cases and some of them may change my mind entirely (e.g. The Otterbox, which I really don't think I want, but thought I would give it a shot).
I'll ship all the ones I don't want back to Amazon. I figure $10 return shipping is a good investment to find the right case for 2 years of my life.
Let me know if you have any questions about the cases and I will try to answer them!
TraderJack said:
HTC M8 One 2 Puregear Kickstand Case Holster Combo - This one looks very similar to the Arduro/Minisuit, but I'm hoping the shell covers a bit more and/or the holster might be good with one of the other covers.
Click to expand...
Click to collapse
I would like to hear more about this one. I have a similar one from verizon but it doesn't look that slick or feel great in my hand
d1ez3 said:
I would like to hear more about this one. I have a similar one from verizon but it doesn't look that slick or feel great in my hand
Click to expand...
Click to collapse
Sure. I think the one from Verizon is identical to the Minisuit/Arduro ones I mention above. None of them look that slick...with the black cross-hatching. About they only thing they have going for them is a good holster setup...but that's why I'm hoping the Puregear has something else going for it rather than a slightly different design.
The cases will be here on Wednesday and I hope to try them all out then.
This is great.... Im very interested in SUPCASE Premium Hybrid Protective Bumper Case
but was holding off ordering from Amazon. Can you tell me how much thickness it adds and overall feel, comfort etc... I agree, I love the body of the M8 and needs to be shown off however it also needs to be protected at the same time.
How's spigen capsule clear? Is it a fingerprint magnet? I presume it's slippery?
As long as we're talking about cases, you should try looking at the Dualtek case for the M8. It's a little bulky but definitely protecting the phone and looks stylish. Feels great, too.
I've been using Otterbox cases for every phone since I switched to Android years ago but I agree that the Defender and Commuter cases make this phone too bulky. Luckily they have the Symmetry Series which is slimmer (one piece, plastic shell with rubber liner built in) but still provides great protection. Color schemes are limited, I went with black, but they have around 5 choices if you like brighter colors.
Cons are that the case is a little slippery for my tastes and it adds bulk to an already big phone but I drop my phone every day so it's a trade-off.
http://www.otterbox.com/Symmetry-Series-for-HTC-One-(M8)/htc28-one-m8,default,pd.html
I just got the cases this evening. I'll respond directly to the questions asked, and then I'll give my overview on the others:
d1ez3 said:
I would like to hear more about this one [HTC M8 One 2 Puregear Kickstand Case Holster Combo]. I have a similar one from verizon but it doesn't look that slick or feel great in my hand
Click to expand...
Click to collapse
The Puregear is almost identical to the Arduro and Minisuit cases as I assumed it would be. It has a slightly different cutout for the camera (which I like less), and a different surface texture from the cross-hatching type on the other two. You can clearly see the surface texture differences in the Amazon pics. While I like the design texture on the Puregear slightly better, it is really so equivalent in every other way that it isn't worth the $4-5 premium you would pay over the Minisuit. These are low bulk cases..good holster. These cases would do virtually nothing in a drop except maybe allow a bounce before the phone snapped out of it. That being said my similar case for the Droid took a few drops and the phone was no worse for wear.
cue_32 said:
This is great.... Im very interested in SUPCASE Premium Hybrid Protective Bumper Case
but was holding off ordering from Amazon. Can you tell me how much thickness it adds and overall feel, comfort etc... I agree, I love the body of the M8 and needs to be shown off however it also needs to be protected at the same time.
Click to expand...
Click to collapse
This one is maybe one of my favorite from the bunch. It is way easier to take on and off then the SUPCASE Unicorn Beetle Premium Hybrid Protective case I also purchased. Unlike the Beetle, the back is totally clear instead of frosted - so it shows off the phone. The sides however are not rigid like the Beetle, which is why it can be removed from the phone easier. The back is more rounded like the phone, whereas the Beetle is more squared. It has a slightly tacky feel...maybe not as much as the Spigen below, but it is grippy. I would say it is kind of your standard TPU type case, but of the utmost quality for these type. Since you can find TPU cases for $3-4, I think the $10 for this is not totally out of line. I'm really unsure that either of the SUPCASEs would offer any real protection from a drop. I will almost definitely be keeping one of these cases for now.
One other benefit of this case is that it fits into the Minisuit/Arduro holster really well.
richteralan said:
How's spigen capsule clear? Is it a fingerprint magnet? I presume it's slippery?
Click to expand...
Click to collapse
Despite the term "soft" being in the description in Amazon...I thought this was going to be a hard case - so I was a bit surprised.
It is actually not slippery at all, quite the contrary. I also don't think it is that bad of a finger print magnet. It is in some ways similar to the SUPCASE Premium Hybrid Protective Bumper Case I mention above, except that it is clear all around instead of having a black bumper. However (and I think I read this elsewhere in the reviews) the clear color of the case has a yellow tinge to it that is really disappointing since the main feature of this case is to showcase the phone. This case may have just a *bit* more cushion than the SUPCASE - but in all honesty I still don't think any of these are offering great drop protection. I think I prefer the SUPCASE (either one) to this one - it just doesn't have the same "sparkle" that you get from the pics.
Going onto the other cases.
The Otterbox and the SEIDIO - the two most expensive ones. And, probably because of that, the two biggest disappointments:
The Ottterbox was just ugly out of the box. I've never had one before because I always thought they were bulky and ugly - but I wanted to give it a chance. Even though the Otterbox probably would protect better than most of these, I still don't think it would be foolproof. I also really dislike the screen covering piece which is non-optional. For the cost, I just wouldn't consider something like this over the i-Blason (see below).
The SEIDIO had the same nice finish I was used to on their matte cases. I wasn't a huge fan of the two piece snap together design. I also got one with a slight manufacturing defect and the pieces didn't line up perfectly. Because of the two piece design, it was able to stay as a slim case but protect all around the edges. However I'm sure the case would snap open if the phone fell onto a hard surface. Additionally, as much as I enjoy the quick release holster of the SEIDIOs, they are not without their problems and can easily get caught on things and drop your phone (happened to me not infrequently with my other cases). The kickstand on this phone was also not that attractive being a bit flimsy and off to the side. Like the others, I also really don't know how much protection from a drop this would give you - probably somewhere just north of the SUPCASE/Spigen. Like the Otterbox, just not worth the money on this phone.
Finally the i-Blason... I think it is one of the better in terms of protection - being a 2-piece shell case. South of the Otterbox maybe, but better than the rest. Not a bad looking case, though not beautiful. I almost wish they had a model without the kickstand and big fat grooves on the back. I don't know if those grooves serve a real functional purpose, but if you removed those pieces you would have a much cleaner looking case with probably the same level of protection.
Looks wise - I think overall the SUPCASE Premium Hybrid is my favorite... I'm just not sure it is going to give me the protection I want from my toddler. I'm considering keeping that and the Minisuit (mostly for the compatible holster). Or, perhaps I will keep the i-Blason for most of the time around the house, but also the SUPCASE for a svelter pocket profile and when I want to show off the phone.
I'm going to keep looking I think for something else like the iBlason. I might give up on the holster idea altogether as I realize it isn't the 90s anymore. I need to see how well this phone does in my pocket over the next week or two to decide if it's a priority.
If you all have more questions on these, I'll do my best to answer.
I just purchased the Case Mate Naked Tough Case from Amazon. So far so good. It has some shock protection and still shows the good looks of the phone. I'm using it in conjunction with a Zagg glass shield. I would post a link, but I suppose I need to post a few more times before I can.
I've only used Otterbox defenders in the past. That being said, I just bought a M8 today and looked at the reviews on Amazon. A lot of people complain about the clear screen protector being bowed or warped and not tight against the screen. What's your impression on this issue? And from the sound and looks of the design, it sounds pretty similar to the M7.
Sent from my HTC One_M8 using XDA Free mobile app
FearlessAZ said:
I've only used Otterbox defenders in the past. That being said, I just bought a M8 today and looked at the reviews on Amazon. A lot of people complain about the clear screen protector being bowed or warped and not tight against the screen. What's your impression on this issue? And from the sound and looks of the design, it sounds pretty similar to the M7.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
Definitely. Honestly I played with the otterbox for all of 30 seconds. First off, I just thought it was ugly...
Put it on and it seemed pretty bulky, although I was going to give it a chance since I knew that with that bulk came good protection.
The minute I touched the screen though I observed exactly what you are stating, the screen protector is not flush and that gave it an overall cheap feel.
So here is my update as I am leaving town for a couple of weeks and am choosing a case to come with me for the first real road test:
Based on my observations above, and the info from this thread, I think I'm going to stick with the Supcase Beetle.
While I like the SUPCASE Premium Hybrid Protective Bumper Case as well, I feel that it just doesn't offer great protection. Also, I find the volume buttons a little loose, as if they move too much off contact with the phone when you press on them.
The Beetle may only be a ~6-7 in the protection department, but the only ones that beat it are the Otterbox and probably the i-Blason. I just can't do the otterbox, and the i-Blason is a tad bulky and doesn't showcase the phone at all. I wish they removed the back nubbins and kickstand from the i-Blason. I haven't found a really nice and lean 2 piece case (internal silicon, hard outer shell). The Spigen 2-piece (not reviewed here) is a good contender for that role but it blocks the IR port, which is a non-starter (even though I will rarely use that feature, on principal I don't want a case that removes features from my phone).
So, for now I'm opting more for an "8 looks and 6/7 protection." The UAG looked like a good alternative that might have been 8 on both fronts, but from my thread linked above someone who has owned both feels that the Beetle is close on par with the UAG from protection standpoint. Price wise, the Beetle wins hands down.
I am still left though in a situation where I don't have a holster. I don't know yet how big of a problem that will be. I need to see how the Beetle does in my pants pocket over the next week. If it doesn't work out, and I can't find a compatible holster for the Beetle, I may have to abandon it all-together because it is just too hard to take it out of the Beetle on a regular basis to put into a holster-compatible case...I don't want to have to do that even weekly.
Dang. That is kind of a let down. I don't mind bulkyness at all but if that screen protector isn't tight, it's just pointless for me. I work construction and need something that won't allow the dirt to get between the screen and protector. I'll look into a few that you suggested. Thanks!