My htc touch dual neon200 has bricked flex cable, but i cant find flex cable for it, flex cable from nike seem not appropriate, flex cable for nike and neon have 70 pin, but for nike is deviation, for neon 200 seem vertical, why? where to buy flex cable for neon 200, thanks everybody very much!
(sorry for my bad English)
vovantuong said:
My htc touch dual neon200 has bricked flex cable, but i cant find flex cable for it, flex cable from nike seem not appropriate, flex cable for nike and neon have 70 pin, but for nike is deviation, for neon 200 seem vertical, why? where to buy flex cable for neon 200, thanks everybody very much!
(sorry for my bad English)
Click to expand...
Click to collapse
why do not you try to check it on ebay ..... there complete
You can also find flex cable at http://www.globaldirectparts.com/HTC-Touch-Dual-Nike-P5500-Replacement-Repair-Parts-s/253.htm
thanks you, i have just say goodbye with it
Related
Hello.
After phone has fallen, has been broken touchscreen.
Phone assorted, changed it. After inclusion of phone the display works, touchscreen does not react to touchs. In service have told the cable has been damaged. Which cable needs to be changed?
Sorry for my bad English
Please, give the link where it is possible to get the necessary cable
Please, share the link on eBay where I can order the necessary cable...
The most likley cable that your talking about would be the flex cable. Just type htc g1flex cable into ebay and you will find all sorts of links
Sent from my NXM726HN using XDA App
Thank you very much.
Wow, I feel like McGuyver.:laugh:
My Incredible S stopped charging when I was fiddling around with a car charger. Also USB-data connection to the computer did not work anymore.
I suspected that there was a fault in the car electric and a chip was blown by too high voltage.
I still have had a torx driver since I changed the screen on my former Wildfire. So I wanted to see if there was a little chance to repair it.
When I opened the device I could not see anything burnt or so inside. The USB-Port was connected with a flex cable to the main board. I removed it. Then I connected the port to an USB-Port of my computer and tried to measure if there was any voltage. Of course I "managed" to create a shortcut while measuring and my computer shut down immediately. Anyway, I had the impression that there was no voltage at the end of the flex cable. I did a little Google search and found out that there were some offerings for an "USB Flex Board" for the Incredible S. So I decided to spend the 25€ on this little piece of nothing.
Today I replaced the old USB - et voila - it works!
I found some articles on the net from people with similar problems but no solution. So I hope this might help. Perhaps the flex cable blows easily or the solder joints between port and flex cable get broken after a while. Somebody offers the USB-socket without flex cable. This is completely useless because the socket won't broke and you won't be able to solder it on the little flex cable.
If you want to try it on your own. I highly recommend to watch the YT-Video on how to open the Incredible. You should have the torx driver and a very small watchmaker driver for these two very little screws on the main board.
How to open the Incredible S:
http://www.youtube.com/watch?v=cTOyjGol_iM
There are many more on YT just do a search.
tricki said:
Wow, I feel like McGuyver.:laugh:
My Incredible S stopped charging when I was fiddling around with a car charger. Also USB-data connection to the computer did not work anymore.
I suspected that there was a fault in the car electric and a chip was blown by too high voltage.
I still have had a torx driver since I changed the screen on my former Wildfire. So I wanted to see if there was a little chance to repair it.
When I opened the device I could not see anything burnt or so inside. The USB-Port was connected with a flex cable to the main board. I removed it. Then I connected the port to an USB-Port of my computer and tried to measure if there was any voltage. Of course I "managed" to create a shortcut while measuring and my computer shut down immediately. Anyway, I had the impression that there was no voltage at the end of the flex cable. I did a little Google search and found out that there were some offerings for an "USB Flex Board" for the Incredible S. So I decided to spend the 25€ on this little piece of nothing.
Today I replaced the old USB - et voila - it works!
I found some articles on the net from people with similar problems but no solution. So I hope this might help. Perhaps the flex cable blows easily or the solder joints between port and flex cable get broken after a while. Somebody offers the USB-socket without flex cable. This is completely useless because the socket won't broke and you won't be able to solder it on the little flex cable.
If you want to try it on your own. I highly recommend to watch the YT-Video on how to open the Incredible. You should have the torx driver and a very small watchmaker driver for these two very little screws on the main board.
Click to expand...
Click to collapse
WoW congratulations for you effort men!!
Can you help us, and give the link for the video
zizou_cr said:
WoW congratulations for you effort men!!
Can you help us, and give the link for the video
Click to expand...
Click to collapse
See first post.
I currently have this problem.. though it charges when I position it a certain way. Problem is I still have a year left on my contract so... Lol
Sent from my HTC Incredible S
sdkim89 said:
I currently have this problem.. though it charges when I position it a certain way. Problem is I still have a year left on my contract so... Lol
Sent from my HTC Incredible S
Click to expand...
Click to collapse
Same to me before it fully stopped working. I suspect the soldering joints are breaking after a while.
Mine is broken too.
Thank you for that. I've ordered a new one and hope it will work again
I've got to admit that's dedication. If that happened to my phone id just buy a new one lol. So well done!
Sent from my HTC Incredible S using xda premium
Thank you for sharing. I'm undecided whether I should repair for myself and really void the guarantee or if I should send it to HTC for repair.
Why did you not use guarantee? HTC provides 24 months?
Don't you trust "Arvato Services Solution GmbH"?
Have you been afraid of being rejected because of S-OFF?
It seems that one can buy the USB connector also at ebay:
Search for "USB Power Charger Charging Connector Port Flex Cable HTC Incredible S S710e G11" or similar.
dsplayer said:
Thank you for sharing. I'm undecided whether I should repair for myself and really void the guarantee or if I should send it to HTC for repair.
Why did you not use guarantee? HTC provides 24 months?
Don't you trust "Arvato Services Solution GmbH"?
Have you been afraid of being rejected because of S-OFF?
It seems that one can buy the USB connector also at ebay:
Search for "USB Power Charger Charging Connector Port Flex Cable HTC Incredible S S710e G11" or similar.
Click to expand...
Click to collapse
My warranty was void anyway through heavy ROM-Flashing and I thought I cooked a chip inside at first. If you still have warranty you should send it in of course.
But you have to wait for a while and you won't feel like McGuyver :laugh:
Thanks for the info and for posting the info!
Firstly, I would apologize for replying to a year old thread.
@tricki, thanks for your post. You gave me the courage to replace my damaged USB port. For my fellow Inc S users who have a damaged USB port, you can find all the required replacement parts in ebay. The replacement takes 15 to 20 minutes (Okay, 30 min. for a first timer). Make sure you purchase a kapton tape just in case your old tape inside the phone refuses to stick again (like mine!). To remove the two tiny screws on the motherboard, you need a #0 philips screw driver (I did not have this at hand the first time I opened the device, so I had to order one and wait for it to arrive). Be gentle while flipping the mother board..It is not that hard anyway.
I posted this because I wanted to share my experience with you guys. My phone is now charging normally and the most important part is.... my computer detects my phone properly!
I also changed my usb port. It's really easy to do it. So, do not waste yours money and just do it.
Incredibly Tapatalked!
Anyone find any good USB charging cables for their G Flex?
I've ordered and tried like over 15 now and none really work like the OEM USB cable... either they give me a slow charger, they fall out of the phone's USB connector, or they won't charge at all.
I've tried like different ones from Monoprice, Fosmon ones, and 2 different ones form BB.
I know its the cables because when I use my OEM LG cable with an old HTC charger it works just fine.
I ordered this 6ft BB Playbook charger over the weekend: http://www.amazon.com/Blackberry-Folding-Blade-Charger-Playbook/dp/B004OZMWUS/ because I've heard people having good results with it. I'll post a review when I get it. Fingers crossed.
sure
Hi
I can only recommend this special low-resistance charging cable from PortaPow.
portablepowersupplies.co.uk/portapow-fast-charge-micro-usb-cable
Please check out this cable here
I got one of the 2.5 meters version and the charging speed is still awesome with this cable! Its perfect for the bedroom.
Greetings
You can buy lg oem usb cable on Amazon. Try search for the cable under different lg phone model. I bought a few pairs for $ 3 each. It don't have necessary said for flex since many other lg phone use the same type of cable.
Sent from my P9070 using Tapatalk
I give the BB Playbook Blade charger a C+ for charing the G Flex but a A+ for charging any other Android device.
It charges the G Flex really super fast... prob the fastest out of all the chargers I've tried from what Battery Monitor Widget tells me BUT like all the other USB cables I've tried the connection isn't secure and iif I move or even just do the knock-knock code the cable slips out of the socket.
I did order 2 more off eBay for charging my other android devices... the 6+ ft cord is really useful. Just wish it would fit the G Flex micro USB socket.
MyCake said:
Hi
I can only recommend this special low-resistance charging cable from PortaPow.
portablepowersupplies.co.uk/portapow-fast-charge-micro-usb-cable
Please check out this cable here
I got one of the 2.5 meters version and the charging speed is still awesome with this cable! Its perfect for the bedroom.
Greetings
Click to expand...
Click to collapse
Thanks. I'll take a look.
hawkwind212 said:
You can buy lg oem usb cable on Amazon. Try search for the cable under different lg phone model. I bought a few pairs for $ 3 each. It don't have necessary said for flex since many other lg phone use the same type of cable.
Click to expand...
Click to collapse
I think this might be the best route because I haven't found 1 USB cable out of 20+ test that will stay in the socket when the phone is moved.
user8755 said:
Anyone find any good USB charging cables for their G Flex?
I've ordered and tried like over 15 now and none really work like the OEM USB cable... either they give me a slow charger, they fall out of the phone's USB connector, or they won't charge at all.
I've tried like different ones from Monoprice, Fosmon ones, and 2 different ones form BB.
I know its the cables because when I use my OEM LG cable with an old HTC charger it works just fine.
I ordered this 6ft BB Playbook charger over the weekend: http://www.amazon.com/Blackberry-Folding-Blade-Charger-Playbook/dp/B004OZMWUS/ because I've heard people having good results with it. I'll post a review when I get it. Fingers crossed.
Click to expand...
Click to collapse
I've always just purchased htc oem cables... since I had my EVO, then with my Galaxy Note II, and now with my Flex...
These work great and fit snug. Best cables I ever bought.
http://www.amazon.com/gp/product/B00H7HLEZY/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
cormasco said:
These work great and fit snug. Best cables I ever bought.
http://www.amazon.com/gp/product/B00H7HLEZY/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Geez 11 bucks for a micro USB? I guess you get what you pay for.
Sent from my LG-D959 using XDA Free mobile app
charleswesde said:
Geez 11 bucks for a micro USB? I guess you get what you pay for.
Sent from my LG-D959 using XDA Free mobile app
Click to expand...
Click to collapse
It's $11 because it's 10 feet long and braided.
Do U use Mac or PC?
I have the same issue, I got a 750mA charger from a Nokia and it charges faster then my 2.1amp oem Samsung charger. I have had a really hard time finding a good cable that works with this phone. I lost my OEM LG Charger, I think it's time to buy one again.
Try charge only cables. Worked for me..
I use blackberry cables. Very high quality, and have never had issues.
ROGERS • LG G Flex D950G • Stock ROOT 4.4.2 • V4A • 180DPI • FLEXIN'
The samsung chargers work pretty well too. Sometimes i get a slow charge when im plugged into like a power brick, and not plugged directly into the wall outlet.
Know it's weird but next plug into a brick or strip an get the slow charging flip the adapter around in the socket
my problem is similar
Ive tried multiple cables,but in the car, it will always give me a slow charge (around half a amp,when i think it should be 1.8)
so bacsically i can get no rapid charge while in the car
Again, ive tried multiple cables and multiple chargers. even 2 that were supposed to figure out the max input of the flex, and use that to charge it rapidly. but i ALWAYS get slow charge
the only time I dont is when I plug it into a standard wall charger,it will rapid charge then
what car chargers have yall used that will NOT give you the slow charge?
please help. Ive spent $80 in trying
Hi All,
I have my X sine it came up on 2014 here in Argentina (2013 version).
At first the USB plug was tight and steady, but it's been a while and now I just got my Lollipop update, but my USB is too loose, so everytime I plug it I must strugle to get it charging.
I've never opend it, I'm not quite sure what to do to get it as it once was again and keep this awesome phone alive..
I'll appreciate any suggestions
Maybe the microusb pin is the issue. Do you have the same problem with a new USB cable?
Sent from my Moto X
bushako said:
Maybe the microusb pin is the issue. Do you have the same problem with a new USB cable?
Sent from my Moto X
Click to expand...
Click to collapse
Well some cables seem to lock a bit more, but all cables are too lose, new cables like you get that 'click' felling, but its still loose, not as much as the original, but loose in the end :S
hey all
i have a problem with my usb port
alot of time its no charging too and the cable look too loose in the usb port
first i thought its my cable so i ordered different cables to test it out ( 3* all quick charge cables )
all cables are charging min 500 max 860 mah
with that conclusion i think my usb port is broke so i ordered a new usb port
questions is do you really need a heatgun to change the connector ?
sorry for my broken english
cemeli said:
hey all
i have a problem with my usb port
alot of time its no charging too and the cable look too loose in the usb port
first i thought its my cable so i ordered different cables to test it out ( 3* all quick charge cables )
all cables are charging min 500 max 860 mah
with that conclusion i think my usb port is broke so i ordered a new usb port
questions is do you really need a heatgun to change the connector ?
Click to expand...
Click to collapse
depend on usb port
but i suggest heatgun is better
cause broken stip leads to change motherboard
Easiest fix is a Qi charger.
cemeli said:
hey all
i have a problem with my usb port
alot of time its no charging too and the cable look too loose in the usb port
first i thought its my cable so i ordered different cables to test it out ( 3* all quick charge cables )
all cables are charging min 500 max 860 mah
with that conclusion i think my usb port is broke so i ordered a new usb port
questions is do you really need a heatgun to change the connector ?
sorry for my broken english
Click to expand...
Click to collapse
Hello,
Check this video, might help you:
I would take the motherboard and bring it to an electronic shop and get it replaced by a professional... :good:
Good luck...
Thanks all
I looked the video and I know I can't do it :--)
Too afraid to burn the other things on motherboard
I will ask some shops if they can do it
Thanks again
cemeli said:
Thanks all
I looked the video and I know I can't do it :--)
Too afraid to burn the other things on motherboard
I will ask some shops if they can do it
Thanks again
Click to expand...
Click to collapse
Hello,
A professional can of course... :good:
Come back once it is done... If you only bring him the mother board, make a picture of the job done once you get it back... Thanks...
Cheers...
cemeli said:
hey all
i have a problem with my usb port
alot of time its no charging too and the cable look too loose in the usb port
first i thought its my cable so i ordered different cables to test it out ( 3* all quick charge cables )
all cables are charging min 500 max 860 mah
with that conclusion i think my usb port is broke so i ordered a new usb port
questions is do you really need a heatgun to change the connector ?
sorry for my broken english
Click to expand...
Click to collapse
just clear out the pocket lint from the usb port using some pins. i was too having this problem now solved..