[KERNEL][AOSP] 2.6.32.26-invisiblek #28 - Droid Incredible Android Development

This kernel is for AOSP-based Froyo roms on the HTC Incredible
Go here for Gingerbread kernels by me
I am in no way responsible for what happens to your phone as a result of flashing this or any kernel.​(i do test everything on my phone first though )​
Do not flash with ROM Manager, it has been known to give very strange issues on this phone, boot into recovery and manually flash it.
Confirmed Working On:
- CyanogenMod 6
- CyanogenMod 7
- Ruby
- Ultimate Droid
- MIUI
- Conical ROM
- Evervolv
- OMGB
- [others? should work with all aosp-based roms]
Click to expand...
Click to collapse
FEATURES:
- CFS
- HAVS
- TinyRCU
- smartass governor
- sd card fix
- fast charge
- undervolted, overclockable (not overclocked by default)
- 128 min screen on / 384 max screen off
- multi-touch with up to 10 3 points recognized (thanks tchebb!) (source) (MUST have ClockworkMod 2.5.0.5 installed for this feature to work. why? i dont know...someone is looking into it...) (also, to test it, use "pointer location" in dev tools on cm, or get "multitouch test" by greenbot on the market) also, it will work with emulators like nesoid!)
Click to expand...
Click to collapse
I started with chad0989's source from here:
http://forum.xda-developers.com/showthread.php?t=848453
Go there for the kernel for sense-based roms.
Known Bugs/Future Features:
- integrated wifi tether
- adb wireless/wifi file explorer
- fast charging
- FM Radio
- [others? please post about them!]
I recommend wiping dalvik any time you flash a kernel! (it's under advanced in recovery) If you haven't, don't bother posting about issues!
Download - #28
Mirror
Download - #21
Mirror
Download - #18
Mirror
Download - #17
Mirror
Download - #16 - wifi fixed, integrated wifi tether - thanks big vinylfreak89!
Mirror
CHANGES
#32
- slightly more agressive on undervolting
- beginnings of experimentation for higher freqs (not yet implemented)
- merge newest version of yaffs2 (thanks chad0989)
- fix some EXT4 issues for future implementation (thanks chad0989)
#31
- revert #30
#30
- broken - tried icache flush again. it appears the important line in the patch is already included in our kernel
#29
- added zodttd's icache flush patch source
#28
- havs back in
- multi touch down to 3 points (should help with some phones having issues) (for some reason you also need clockworkmod 2.5.0.5 installed for more than 2 points. odd? yes, weird? yes, do i know why? no)
#25 (testing)
- revert back to #18
- dumped havs
- no battery patches
- 384 max screen off
- tchebb's multi-touch patch
#24 (testing)
- dumped all battery patches
- 384 max screen on freq (to fix the lag when receiving a call)
#23 (testing)
- dumped havs
#22 (testing)
- ms79723's newer battery fix
#21
- adds the 3-10 multi-touch points from tchebb
#20 (testing)
- adds 128mhz back in, revert's 19's patch
#19 (testing)
- another bump charge fix attempt
#18
- revert the non-fix for 100-90% battery life drop
- revert swap reason and because it doesnt work and because we have plenty of ram
- set 245mhz as min while screen is on (dunno why i didnt have this before)
#17
- fixes the 100%-90% quick drop of battery life
- swap enabled
#16
- vinyfreak89's build. all is working here!
#15
- MIA
#14
- bastard child of an attempt at fixing wireless
#13
- fast charge fix
#12 (the phone is still behind one build number, will be fixed on next build. i promise!)
- fixed that damn default governor (disabled ondemand altogether)
#11 (build #10 according to phone)
- patched up to chads 11/28 build
- tinyrcu
- HAVS
- minor changes to smartass
- minor changes to voltages
#10 (build #9 according to phone)
-- Initial public release
- 2.6.32.26 - off chad0989's source (thanks!)
- smartass governor
- oc/uv
- cyanogen's patches (thanks!)
Click to expand...
Click to collapse
CREDITS:
- cyanogen for his patches
- chad0989 for his modified kernel source
- vinylfreak89 for guidance and big helps!
- seanzer for telling me where to double-check myself, guidance and all around being awesome
- tchebb for the multi-touch patch
- zodttd for the icache flush fix
- ms79723 for battery fixes
- creators of HAVS, smartass governor and anyone else who contributed to the bunches of patches that this kernel has received
- Linus and the entire linux community
- Google
- HTC
- [Others? im sure there are...]
Click to expand...
Click to collapse
Enjoy!
If you have benefited from my work, please consider buying me a beer! (Donation link on the left, below my name)
FAQ
Q: What is the smartass governer?
A: The smartass governer drops drops the max cpu frequency when your screen is off. It is effective in saving battery life. Read more about it here
Q: Will this work with [ROM]?
A: Maybe. There is a list of what roms this kernel is known to work with near the top of the original post. Refer to your Rom's OP to see if it is sense or aosp-based. If it is sense-based, check here for the kernel that chad made (which is what this is based off). If it is aosp-based and not listed here, please do a nandroid, try the kernel and report back!
Q: Should I use setCPU or any other cpu overclocking program?
A: Up to you, it isn't needed. I use OS Monitor WITHOUT root ability enabled to monitor the cpu's settings. This kernel has the smartass governor which will automagically downclock your cpu's max frequency while your screen is off.
Click to expand...
Click to collapse
All my source is at Github

Sir thank you so much for this
My hats off to you
Fyi the latest cm6 nightly has sick battery life for some reason so check out out
Again thank you I will flash this when I get home and give feed back
Sent from my ADR6300 using XDA App

invisiblek said:
started with chad0989's source from here:
http://forum.xda-developers.com/showthread.php?t=848453
go there for a features list
not to steal his thunder or anything, its an awesome kernel, but i figured i would make this thread to support the aosp version
basically what ive done is take his kernel source and apply cyanogen's patches to it
known bugs:
integrated wifi tether (wireless tether for root users works)
others?
Download
Github
enjoy!
Click to expand...
Click to collapse
Just flashed this and so far so good. Phone feels super snappy. Will report back with battery stats later.
Question: Is this like chad0989's in that we don't need a screen-off profile in setcpu?
nice job dude!!!

just flashed it and have a question..........your title says #10 and on the phone it says #9.......any difference worth noting??

Will this work with Skyraider 3.3.4?

Any reason for the larger size? I am running Ruby, but I see it has CM6 optimzations. Will this work for Ruby also?

chemical1der said:
Question: Is this like chad0989's in that we don't need a screen-off profile in setcpu?
Click to expand...
Click to collapse
yes it has the "smartass" governor, which drops the max cpu speed on screen off
fillyo said:
Will this work with Skyraider 3.3.4?
Click to expand...
Click to collapse
will not work with skyraider, check first link in op for sense kernel that chad made
shoman24v said:
Any reason for the larger size? I am running Ruby, but I see it has CM6 optimzations. Will this work for Ruby also?
Click to expand...
Click to collapse
it has almost all cm patches, so very similar to the cm kernel, with some added things, but it should work on ruby. please try and report back
wwjdd44 said:
just flashed it and have a question..........your title says #10 and on the phone it says #9.......any difference worth
Click to expand...
Click to collapse
my mistake on the build number, il get that squared away on the next build
Sent from my ADR6300 using XDA App

Works on Ruby. Will post more info later.

Edit, Phone just rebooted
Well, it works on Ruby, I'll take it for a test drive for the next few days.
In my Gem settings the Min Freq was set to 128MHz with the Max Freq set to 1152MHz. Is this correct. I changed it to 245/998.
Does it have all these features:
11/28/2010:
incrediblec-MR3-2.6.32-g9a2fc16 base
Patched up to 2.6.32.26
HAVS/UV
OC up to 1.136
BFQ I/O scheduler
Tiny RCU
CFS scheduler tweaks
GPU+
SD card speed fix
Smartass CPU gov (tweaked a bit) default - screen on minimum now 384
TUN + CIFS modules
Click to expand...
Click to collapse

shoman24v said:
Does it have all these features:
Click to expand...
Click to collapse
not yet
ill be working on patching up in the next day or two (pretty busy tomorrow)
EDIT: yes, the kernel is overclocked and undervolted a bit, so those frequencies are correct. will run fine at 998 though

invisiblek said:
not yet
ill be working on patching up in the next day or two (pretty busy tomorrow)
Click to expand...
Click to collapse
Ok, looking forward to the next release

invisiblek said:
not yet
ill be working on patching up in the next day or two (pretty busy tomorrow)
EDIT: yes, the kernel is overclocked and undervolted a bit, so those frequencies are correct. will run fine at 998 though
Click to expand...
Click to collapse
the 1.15 clock sucks for most people
i have seen a 1.13 a few times on here is this possible ? OR is this kernel stable at 1.15?
also can you create cfs and bfs flavors for variety
if you need sources let me know
also please keep a nice change log
TIA
you are the best for this
these forums are in need for a sweet aosp kernel

Thanks for compiling this!!! The dedication, effort, and talent of the developers is highly regarded, and sincerely appreciated.
My experience ~ Tried it on Ulitmate Droid v2.1. For my device, it wasn't as responsive as Chad's original AOSP, nor did I get as high Q scores - idk why - probably me or my device - flashed back.

and also this brings life back to AOSP CM6 Roms

smtom said:
My experience ~ Tried it on Ulitmate Droid v2.1. For my device, it wasn't as responsive as Chad's original AOSP, nor did I get as high Q scores - idk why - probably me or my device - flashed back.
Click to expand...
Click to collapse
I'm finding it very responsive, your quadrant scores will be lower since it doesn't include bfs
Sent from my ADR6300 using XDA App

Please enable 1.0752, 1.1136 GHz levels too. 1.152 is touch and go for most of us.
Thanks

Flawless on MIUI 11.26

khanam said:
Please enable 1.0752, 1.1136 GHz levels too. 1.152 is touch and go for most of us.
Thanks
Click to expand...
Click to collapse
yea I will definitely do this hopefully I can get some time tonight
Sent from my ADR6300 using XDA App

Note: for wireless tether you HAVE to use the pre-14 from their website. And I admit it's not nearly as snappy as the integrated for some reason.

Can not get it to download
Sent from my ADR6300 using XDA App

Related

[KERNEL][06 DEC] Goldenleaf .v111206 / franco.Kernel-gbs.v20a

Goldenleaf is a rewrite from stock lg kernel with almost all the newest features. Made for the best battery life.
(for performance go on franco.Kernel-GBS below)
.news
111206
...reverted blackscreen fix
...system should be a bit smoothier
111205
...fixed blackscreen bug.
...no noise when phone wakeup
...a little change in touchscreen driver
...all I/O schedulers activated.
...Noop as default I/O scheduler
111126
...fixed some incompatibility with some apps [games reported by users]
...reverted touchscreen driver. now it's the stock LG 2.6.32 again [gbs kernel will still have the brand new one backported from .35]
...cpu spike fix enabled -> more battery
...axis inversion workaround still disabled -> more battery
...SLUB Memory Allocator.
111122
...blackscreen bug fix for "screen on" animation removed
...no more darkscreen
...new touchscreen driver, based on my new driver made for gbs, backported from LG 2.6.35 source
...does not have axis inversion workaround
Kernel Source: https://github.com/fserve/goldenleaf
Click to expand...
Click to collapse
Goldenleaf.v111206 http://www.mediafire.com/?o3avtm5yjrbv1qa
Goldenleaf.v111206-LG http://www.mediafire.com/?p8j4xwmwazkfa46
Know bugs in most updated goldenleaf version:
none.
GBS is an modified version of franco.Kernel v19.4, original franco.Kernel code is heavily patched for the best performance. With this mod is added more battery life, some changes in kernel config, cpu spike on touch the screen fix, better axis inversion workaround, USB-transfer fix, Powertop/dmesg support, and for froyo based roms users, recharging with phone off fix.
- Recharging with phone off fixed. (mikos cyanogen based roms have a feature to: if the phone is off, when you plug the charger, it will power on the phone. The normal behaviour is to boot a system only to recharge phone. But mik has disabled it. SO, if you use devoid.#final this recharge while offline will work. if you use cyanogen, will not work.)
what's new in:
gbs.v20a
...blackscreen fix reverted
...more little touches on touchscreen driver
...deadline I/O scheduler as default
...deadline I/O scheduler patched
...cfs vsync on
...bfs vsync off
gbs.v20
...vm_max_readahead patched, will automagically get the best value for it. (mad patch, thanks franciscofranco)
...slub patch
...fsync patch
...kernel upgraded to 2.6.32.49
...blackscreen bug fix
...all I/O schedulers are activated
...Noop as default I/O scheduler
...smartass as default governor.
...[CFS-ONLY] with agroup patch as always, since franco 19.4
...axis inversion workaround off
...newfix, expect 50% cpu use on touch, smoothier.
...oldfix, expect 25% cpu use on touch, faster and battery saving.
gbs.v19.2
..faster (disabled some optimizations that are not helping at all)
..power drivers reverted
..temp reporting should be fixed
..wifi drivers reverted
..kernel upgraded to 2.6.32.48
gbs.v18c
..added some patches
..fix camera flicker
..[cfs-only] enabled automatic group patch. (better multitasking)
Click to expand...
Click to collapse
BFS franco.Kernel-gbs.v20a-gamer http://www.mediafire.com/?gc4o4yu774hkhz3
CFS franco.Kernel-gbs.v20a http://www.mediafire.com/?9r5yktkamy21wiz
BFS franco.Kernel-gbs.v20-gamer http://www.mediafire.com/?531huxx14xsp794
CFS franco.Kernel-gbs.v20 http://www.mediafire.com/?adbhrppo8icu5yy
Testing release:
Test it for: Blackscreen (Ps. don't use "screen on" animation). And screen lag to wakeup.
gbs-testing-noop-lg http://www.mediafire.com/?4v5p7doybvfdprl v20a with noop as default i/o scheduler and stock lg touchscreen driver
gbs-testing-deadline-lg http://www.mediafire.com/?efoceag8fhglqq9 v20a with deadline as default i/o scheduler and stock lg touchscreen driver
Know bugs in any GBS version:
AndroSS does not work;
BFS: Brain F**k Scheduler - The updated and improved process scheduler. BFS is better for user interactions.
CFS: Completely Fair Scheduler - The original process scheduler. CFS is better for multitasking.
Click to expand...
Click to collapse
About governors:
smartass is the best governor for me when i want raw performance - http://forum.xda-developers.com/showpost.php?p=16467430&postcount=5362
conservative when i want battery with good performance.
Click to expand...
Click to collapse
TIPS FOR THE BEST BATTERY LIFE
NO AWAKE APPS
Sync off
WiFi off
BT off
Data off
2G
Minimum brightness
...and pray for good quality signal
This can help: http://forum.xda-developers.com/showthread.php?t=1179809
Click to expand...
Click to collapse
How to use it? Just download and Flash via ClockworkMod Recovery.
Remember:
This kernel is ONLY for LG Stock ROM 2.2, Void.#forever, devoid, miks 6.5.x, CyanogenMMatt 1.1...
WIPE DALVIK, BATTERY AND CACHE!
DONT FLASH 2 DIFFERENT ZIPS AT THE SAME TIME!
MAKE A REBOOT BEFORE EACH FLASH
If you are using AmonRa, disable signature before flashing.
NOT underclock below 480MHz. At lower speeds, wakeups-from-idle per second are bigger than 480MHz and they share the same voltage, so thats leads to more battery drain.
It's recomended to use: MIN 480 / MAX YOUR CHOICE
more about it: http://forum.xda-developers.com/showthread.php?t=999064
and here: http://forum.xda-developers.com/showpost.php?p=9704402&postcount=22
Click to expand...
Click to collapse
Results of my work:
http://forum.xda-developers.com/showpost.php?p=17296370&postcount=450 - 2d 3h
http://forum.xda-developers.com/showpost.php?p=17074123&postcount=264 - 2d 8h
http://forum.xda-developers.com/showpost.php?p=17430882&postcount=1446 - 3 days
http://forum.xda-developers.com/showpost.php?p=17516383&postcount=633 - 7 days!
some happy customers:
http://forum.xda-developers.com/showpost.php?p=16951313&postcount=87
http://forum.xda-developers.com/showpost.php?p=17003300&postcount=137
http://forum.xda-developers.com/showpost.php?p=17046619&postcount=197
http://forum.xda-developers.com/showpost.php?p=17050287&postcount=204
http://forum.xda-developers.com/showpost.php?p=17050411&postcount=205
http://forum.xda-developers.com/showpost.php?p=17050506&postcount=206
http://forum.xda-developers.com/showpost.php?p=17051156&postcount=209
http://forum.xda-developers.com/showpost.php?p=17061662&postcount=251
http://forum.xda-developers.com/showpost.php?p=17105840&postcount=302
http://forum.xda-developers.com/showpost.php?p=17111202&postcount=311
http://forum.xda-developers.com/showpost.php?p=17129410&postcount=314
http://forum.xda-developers.com/showpost.php?p=17134152&postcount=315
http://forum.xda-developers.com/showpost.php?p=17264084&postcount=416
http://forum.xda-developers.com/showpost.php?p=17391053&postcount=530
http://forum.xda-developers.com/showpost.php?p=17444315&postcount=584
http://forum.xda-developers.com/showpost.php?p=17447137&postcount=587
testing camera:
http://forum.xda-developers.com/showpost.php?p=17024566&postcount=164
Click to expand...
Click to collapse
Adobe Flash Player 10.2 that works with p500: http://www.androidcampus.in/2011/10/adobe-flash-player-102-for-armv6-and.html
Adobe Flash Player 10.1 that works with p500: http://forum.xda-developers.com/showthread.php?t=1147092
Touchscreen Booster: http://forum.xda-developers.com/showthread.php?t=934500
How to reduce power consumption: http://www.thinkwiki.org/wiki/How_to_reduce_power_consumption
Nice power monitor app for android http://ziyang.eecs.umich.edu/projects/powertutor/
Greetz from Manaus/Amazonas - Brazil!
Curious findings thank you for taking the time to test all that ****. Tell me, why are you adding USB as a module?
Just to get the suspend mode that powertop recomends.
fserve said:
Just to get the suspend mode that powertop recomends.
Click to expand...
Click to collapse
It's possible to suspend USB while it's not being used having it configured as a module?
I dont know for sure, since that p500 uses usb in slave mode.
But if this really works, as powertop says, i can get more battery life
So, lets test
Sent from my LG-P500 using XDA App
flashing i'll give you feedback in a couple days, thanks for taking your time on this. - Thumbs up - Obrigao! haha.
fserve said:
I dont know for sure, since that p500 uses usb in slave mode.
But if this really works, as powertop says, i can get more battery life
So, lets test
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
I'll try your .config changes tomorrow as I'm going to push 2.6.32.45
I've made more cleanups, testing right now.
Will release later.
do we need to flas zram after this?????????
i meant "flash" zram.zip... which was needed in fk... which is the base of this kernal.... and i was just asking!!!!!!!!!! sry about the typing error.....
Hi Fserve, thanks for your work, I have a question... You have removed things for keyboards, this means I can or cannot use a bluetooth keyboard? I'm asking this before purchasing such keyboard, thanks!
orsonbear said:
Hi Fserve, thanks for your work, I have a question... You have removed things for keyboards, this means I can or cannot use a bluetooth keyboard? I'm asking this before purchasing such keyboard, thanks!
Click to expand...
Click to collapse
You can use! That keyboard option removed was an legacy linux hack thing to restart the computer via keyboard. (sysrq magic key)
About zram, it is enabled in the kernel, if you have flashed it in any version of franco.Kernel it will work here.
How?
Its simple, when you flash zram it will modify one part of your system, and kernel another. So you only need to reflash zram in case of wipe all data.
Sent from my LG-P500 using XDA App
fserve said:
You can use! That keyboard option removed was an legacy linux hack thing to restart the computer via keyboard. (sysrq magic key)
About zram, it is enabled in the kernel, if you have flashed it in any version of franco.Kernel it will work here.
How?
Its simple, when you flash zram it will modify one part of your system, and kernel another. So you only need to reflash zram in case of wipe all data.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
thnks man...
What about. config.zip.
Do i have to flash it or what?????
Sent from my LG-P500 using XDA Premium App
gkalenis said:
What about. config.zip.
Do i have to flash it or what?????
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
Dont waste your time with that! It's only for developers know what i changed in the original franco.Kernel
arielxarg said:
+1 to this.
no offense , but i just wanna find some info in this thread , and all i can see on the few pages back is people arguing about ****
maybe mod can make 1 thread for us to report JUNK post , or UNNECESSARY post.
Click to expand...
Click to collapse
I'll give you info about this kernel. fserve fetched my sources, changed the .config file to add/delete some functionalities just like he stated in the first post and he came here and shared it with everyone, and I'm glad he did because I'm definitely going to look up on his configuration changes. Other than that it's still my kernel. That's all the info I can give to you.
New version released. (IT'S ON THE FIRST PAGE)
V8 was compiled with -Os (to make a small kernel)
V12 was compiled with -O2 (to make a faster kernel)
V12 got cleaned up ethernet 10/100 drivers, some scsi drivers, some loggers, some debuggers, some useless stuff. for now, only bfs version.
Stop the offtopic here, please
fserve said:
V12 was compiled with -Os (to make a faster kernel)
Click to expand...
Click to collapse
You meant -O2 or something?
fserve said:
V12 got cleaned up ethernet 10/100 drivers, some scsi drivers, some loggers, some debuggers, some useless stuff. for now, only bfs version.
Click to expand...
Click to collapse
Good riddance.
dr.notor said:
You meant -O2 or something?
Good riddance.
Click to expand...
Click to collapse
oops, will edit.
Please, resolve their differences through PM and not detract the subject
@fserve good work ! when are more opinions about your kernel, and also when I have more time will prove it

[KERNEL] Enki v0-alpha > experimental, lean & blazing fast.

Enki is a package for Vivo (HTC Incredible S) comprised of:
Custom kernel
Patched libsqlite.so
The custom kernel is based on CM's source up until 6/11. The credit of every work prior to this date belongs to everyone who contributed for it. I've just tweaked and messed a bit in order to optimize performance, internet speed, battery and memory management, while keeping it as light as possible.
Currently working for:
CyanogenMOD 7
* It should work for more but I only tested CM. PM me if you test drive and find it working for other ROMs so I can add them here.
Kernel features/changelog:
Code:
[I]v0-alpha[/I]:
- Tiny Preempt RCU & RCU boost.
- Added SLQB slab allocator.
- Added Autogroup scheduling feature.
- Optimizations to CFS & Autogroup.
- Overclock support up to 1.8 Ghz.
- 3 new CPU governors: Lazy, InteractiveX & Smartass2 (default).
- Governors parameters tuned for the HTC Incredible S.
- Removed some unused governors.
- Updated Deadline I/O Scheduler to a highly optimized one (default).
- Removed all other I/O schedulers.
- Support for CPU unaligned access.
- Veno TCP Congestion control. *
- Stochastic Fair Blue network scheduler. *
- Bumped jHash to last version. *
- Improved CRC32 algorithm.
- Posix timers optimized.
- Prevent multiple syscalls restart patch.
- Ext4 optimized (fixed disk write performance regression). **
- Added cleancache feature.
- Patched Ext4 for cleancache support. **
- Disabled swappiness & zRAM.
- Increased data transfer rate.
- SYSCTL and LMK heavy tweaking.
- CIFS, TUN & Logcat can be loaded as modules.
- Arch unwind & frame pointer have been disabled.
- Heavily cleaned of debugging and tracing crap.
- Proper ext4 mount flags built-in. **
- Patched libsqlite.so with disabled sync feature. **
* huge internet/market page loading boost
** boosts I/O performance which affects smoothness such as the opening/closing of applications
Download:
v0-alpha: 83ac372f0b115b1b5aa87eaaac0d610d
Instructions:
Read the FAQ.
Download the package in the above link.
[Optional] Check the md5sum to confirm it's not a corrupted copy.
Copy file to microSD card
Reboot into recovery
[Optional] Wipe dalvik-cache
Choose "install zip from sdcard" and pick the file
Reboot and enjoy
[Optional] To confirm it's active go to settings > about
FAQ:
Code:
Q. Do I need to wipe data?
A. No, never.
Q. Do I need to flash this if I flash a new CM update/nightly?
A. Yes. Everytime you flash a new CM version, you need to reflash this.
Q. How can I change governor?
A. Use an application like SetCPU or No-frills CPU Control or go to Settings > CyanogenMod settings > performance > CPU Settings.
Q. Where is logcat, CIFS and TUN?
A. You can load them as modules through the following command: insmod /system/lib/modules/<name>.ko - (logger,cifs,tun).
You can find some benchmarks attached.
(245/1024, Smartass2, latest nightly, Enki v0-alpha)
A download link would be nice be happy to try it.
Sounds good, but download link don't realy work...
I know, I put it down; I found a last minute bug and I need to retrace my steps until I find the cause.
Sorry for this, I'll bump the thread when it's done.
be back laterz when its up
Looking forward to test this, cause its always nice with a new kernel ;-)
/ Jess Kölner /
/ Sent from my phone /
Here's some eyecandy meanwhile:
http://dl.dropbox.com/u/13427114/screenshot-1321028372163.png (1.5 Ghz)
knzo said:
Here's some eyecandy meanwhile:
http://dl.dropbox.com/u/13427114/screenshot-1321028372163.png (1.5 Ghz)
Click to expand...
Click to collapse
damn.. 4k.. that's like stock sensation already
It's work for sense roms?
Looks like a early Christmas present for IncS users this year!!!
... thats looks insane... sure it hasn't been through PhotoShop
how much did you OC'd?
same questions... does it work with SENSE roms?
baste07 said:
how much did you OC'd?
same questions... does it work with SENSE roms?
Click to expand...
Click to collapse
The quadrant in the first post is with 1.0 Mhz. The one with 4000 is with 1.5 Ghz.
The kernel will support OC up to 1.8 Ghz but I couldn't go past 1.5, alas.
As for Sense ROMs, I think it should work being that ramdisk is the same. But the only way to know for sure is by testing it; my test drive was only on CM.
Anyway, I've located the problem but I'm too tired to release it today. However, you can expect the v0-alpha version for tomorrow.
jkolner said:
Looks like a early Christmas present for IncS users this year!!!
... thats looks insane... sure it hasn't been through PhotoShop
Click to expand...
Click to collapse
this i dont believe lol
yeah... 42k? does it even go up that high
baste07 said:
yeah... 42k? does it even go up that high
Click to expand...
Click to collapse
unless he has a hexa core cpu phone, adreno 999 then fps capped at 300 lol
That's photoshopped from my 4214 score obviously, he just added an extra 2.
If you check the lower discriminated results you can see the total value is untouched.
Either way, I'll upload it in a few hours.
have you tested on a sense rom?
how is your battery life with this beast?
baste07 said:
have you tested on a sense rom?
how is your battery life with this beast?
Click to expand...
Click to collapse
He mentioned he has tested it on cm only
Sent from my HTC Incredible S using XDA App
I was asking from then until now if he has been able to test on a sense rom
Sent from my HTC Incredible S using xda premium
v0-alpha uploaded, test it out.

[EzyICS by Mengpo v1.1][Kernel][P6810] For Stock XXLPL and optimizations

Disclaimer :
I am not responsible if you brick, break, blow up, drop, lose, or get your device pregnant. Everything you do is your responsibility.
This kernel is only made for the GT-P6810 WiFi only Tablet, It is not compatible with Locerra CM9 nor CM10, and it may not work on everyone's device. I'm not a real developer and I don't know how to fix your device if you break it!
This kernel is forked (a direct copy to be more specific) from the EzyICS Kernel v1 and I thank again Ezynow for his hard work. I took his changes from his topic and adapt this kernel to the P6810. Actually, I took the .config and compare line by line which was for the P6800 and which was for the P6810. So, I disabled all the gsm/modem devices.
This kernel is not perfect and needs be to improved so don't be harsh if there's some kind of problem. I've tested it again tonight and I did not brick or whatsoever other problem... I'll list on the features which one are working and tested and others which don't.
There's only one file to download and flash it with the locerra's cwm. So, you have to install locerra's cmw first ! See below
Bugs​
None known yet
Features​
Removed MMC_CAP_ERASE (BrickBug) (tested ok) like Dedrak's one I did this :
Code:
//mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE;
mmc->caps |= MMC_CAP_SDIO_IRQ; // Brick Bug Fix
Built from GT-P6810_ICS_Opensource_Update1.zip;
Support for bootanimation. Place the bootanimation.zip in /system/media folder.
Various compiler optimizations (neon, cflags :-O2 -fomit-frame-pointer etc.) (Debug stuff remains for now but will be taken after some more mods are added);
Mali state tracking disabled;
/etc/init.d/S* script support (Add here your tweaks / ramscripts from custom roms etc.) (tested ok)
Added Governor :
Pegasusq (by default) - (recommend as it deals better with multi-cpu devices like our tabs but may require some tweaking)(tested ok)
interactive;
lulzactive;
lulzactiveq;
smartassV2;
hotplug.
I don't know if these governors will suit to our tab and they need to be tested.
Overclocking Support up to : 1600 mhz. It test further but the tab was not stable enough and as Ezynow said : ICS changes how frequency control is implemented so not as easily overclockable as honeycomb was. Fixed CPU Boot Up frequencies to default values / not overclocked settings (tested ok)
Undervolting Support:
Same frequencies as Eznow used : 200 / 500 / 16000 hz (As these are the most used)
So far running pretty stable on:
Code:
1600 mhz -------------------> 1300mv
1400 mhz -------------------> 1250mv
1200 mhz -------------------> 1175mv
1000 mhz -------------------> 1075mv
800 mhz ---------------------> 1000mv
500 mhz ---------------------> 875mv
200 mhz ---------------------> 875mv
ALL DEVICES will have different values but these values gave by Ezynow worked for me. Use SetCpu to change voltages or cpu overclocks. (tested ok)
Slightly undervolted GPU voltages and thus reduced by 50mv for default GPU levels. (tested ok)
in built CIFS support. Changed Max_BUFFER Size to max 130084 (Thanks to Pinkowl for first supporting this).
In cifs options put: rsize=130048. (tested ok)
NFS share mounting. (not tested)
UDF & ISO support - i.e native bluray disk support. (not tested)
Here is information on it This is configurable using a tool known as NSTools on the PlayStore. When using this 100% means the bus frequency is at 100% try not to get confused. So 100% of 100MHz would be 100MHz so if you increase it to 120% so it would be 120% of 100MHz would be 120MHz and this value applies to all CPU frequencies, GPU ect.
Compatibility list​It seems to work on all stock ICS releases or derived custom ROMs.
CM9 - Not working;
CM10 - Not working;
XXLPL - Tested: (tested ok)
Install​Go into CWM.
Make a nandroid backup.
Install zip from sdcard.
Problems​Go into CWM-> Advanced restore -> restore boot.
Changelog:​v1.1
Default cpu scaling governor set to pegasusq (siyahkernel version).
Enabled bootanimation;
pegasusq cpu scalling governor added (siyahkernel version : more stable);
interactive cpu scalling governor added;
lulzactive cpu scalling governor added;
lulzactiveq cpu scalling governor added;
smartassV2 cpu scalling governor added;
hotplug cpu scalling governor added.
v1
First release (see features)
Downloads​P6810 wifi only
Stock Kernel XXLPM : Download
v1: Download (2012-08-23)
v1.1: Download (2012-09-24)
Special Thanks​
Ezynow (of course)
Chainfire for his work
Locerra to be the first on the 7.7
UpInTheAir (who was very supportive)
Dedrak to be the first user of my tutorial
gokhanmoral for his governor's tweaks
And others on this forum
If you want to add features or just want to ask questions feel free to do it
Oh nooo I on P6800..
If I on P6810...will whack this on my Tab
Nice...keep it up mengpo, any chance for P6800?
I have a suggestion for the Pegasusq governor. You could perhaps tweak it according to siyah kernel like on the sgs2?
Astrix Ashburn said:
Oh nooo I on P6800..
If I on P6810...will whack this on my Tab
Nice...keep it up mengpo, any chance for P6800?
Click to expand...
Click to collapse
The P6800 is available for a while now see this thread and have a good flash : http://forum.xda-developers.com/showthread.php?t=1807193
lambstone said:
I have a suggestion for the Pegasusq governor. You could perhaps tweak it according to siyah kernel like on the sgs2?
Click to expand...
Click to collapse
Ok I'll seek into this Have you got any link where I can read some stuff ?
Thanks
mengpo said:
The P6800 is available for a while now see this thread and have a good flash : http://forum.xda-developers.com/showthread.php?t=1807193
Click to expand...
Click to collapse
Yup..I been using it since it release till now
Thinking you can put up more tweak..etc? I will flash it
mengpo said:
Ok I'll seek into this Have you got any link where I can read some stuff ?
Thanks
Click to expand...
Click to collapse
I really can't remember if there was any link describing the pegasusq governor when it was first introduced but however, the link below is for the sources. not really sure if it will be of any use to you though. perhaps some features could be implemented over?
https://github.com/gokhanmoral/siyahkernel3
there are also some information about the ICS kernel for sgs2
http://forum.xda-developers.com/showthread.php?t=1572937
lambstone said:
I really can't remember if there was any link describing the pegasusq governor when it was first introduced but however, the link below is for the sources. not really sure if it will be of any use to you though. perhaps some features could be implemented over?
https://github.com/gokhanmoral/siyahkernel3
there are also some information about the ICS kernel for sgs2
http://forum.xda-developers.com/showthread.php?t=1572937
Click to expand...
Click to collapse
Thanks for the links I'll try to tweak a bit more this kernel to do the same the SGS2
Hi Mate,
Great to see the development you've made! Excellent work :good:
Still away right now and hopefully missus will have sorted out a place to stay (and ADSL) by the time I return.
Need to (want) to get started on a new ROM build for P6810 (P6810XXLPM), but that won't happen for 2 weeks.
Would love to take your kernel for a run then
Keep it up
I have many self-reboots with this kernel... What can I do?
diamond_lover said:
I have many self-reboots with this kernel... What can I do?
Click to expand...
Click to collapse
Simple. Don't use it. This is just the first version created by Mengpo and is bound to have issues here and there. I'll wait for him to post an update (whenever that happens) before evaluating and trying it.
diamond_lover said:
I have many self-reboots with this kernel... What can I do?
Click to expand...
Click to collapse
Are there just random or when you use a specific app ?
lambstone said:
Simple. Don't use it. This is just the first version created by Mengpo and is bound to have issues here and there. I'll wait for him to post an update (whenever that happens) before evaluating and trying it.
Click to expand...
Click to collapse
I got some issue with my internet connexion and got some problem with my computer too... The update could take a while... Well I'll see with dedraks if I could use some help
wrong post.
mengpo said:
Are there just random or when you use a specific app ?
I got some issue with my internet connexion and got some problem with my computer too... The update could take a while... Well I'll see with dedraks if I could use some help
Click to expand...
Click to collapse
Just installed stock -> CWM -> kernel, then I boot up, then I have random reboots (and the speakers make a little sound like click click click..)
diamond_lover said:
Just installed stock -> CWM -> kernel, then I boot up, then I have random reboots (and the speakers make a little sound like click click click..)
Click to expand...
Click to collapse
Did you undervolt or overclock the tab with that kernel ? (using setcpu or else)
mengpo said:
Did you undervolt or overclock the tab with that kernel ? (using setcpu or else)
Click to expand...
Click to collapse
nope, just fresh installed... that's weird..
diamond_lover said:
nope, just fresh installed... that's weird..
Click to expand...
Click to collapse
Hummm yup that's weird... I'm looking into it
diamond_lover said:
nope, just fresh installed... that's weird..
Click to expand...
Click to collapse
I did an update and changed the scalling governor (pegasusq with pagasusq (siyah version). I think the problem went from there and thus you won't have this random reboot issue.
good luck !
The v1.1 download link seems bad; says file is deleted.
Also anyone use this on Skyfire Rom, which seems based on the same stock firmware?
mengpo said:
I did an update and changed the scalling governor (pegasusq with pagasusq (siyah version). I think the problem went from there and thus you won't have this random reboot issue.
good luck !
Click to expand...
Click to collapse
Nice, I'll try, but I can't download, could you check the link?
Thanks in advance.
diamond_lover said:
Nice, I'll try, but I can't download, could you check the link?
Thanks in advance.
Click to expand...
Click to collapse
I don't know what happened... I've updated the link

[KERNEL] ★ XS ICS v2.2 ★ 2.0GHz OC • S2W • 11 Governors • 6 Schedulers

XS ICS
The original 3.0 custom kernel for the Incredible S​
Disclaimer: Please read before continuing
This is a 3.0.x kernel, which means it is for ICS ROM's only.
You use this kernel and it's available settings at your own risk. I accept no responsibility for your phone, or anything that happens to it while using the feature. Although it has the ability to overclock to 2.0GHz, this may shorten the life of your device.​
Click to expand...
Click to collapse
The aim of this kernel is to be the most feature rich kernel available for the Incredible S. The kernel is the engine of your phone, and I want to include support for everything! If there is something you need and it isn't here, let me know and I will do my best to add it. XDA is a community, and lots of the work in this kernel has been discovered / and created by a wide range of people, all of whom this would not be possible. It is pretty impossible to name all of the people to thank, but know this is the result of a whole community, and my gratitude goes out to everyone who has contributed to this site!
Sources available in my github
Latest Version: v2.2 Attached To Post
Released 29/08/12​
Features
- Based of HTC Sources, patched all the way up to 3.0.42
- CPU Table The CPU table has been optimised to include the following freqs:
----------245MHz, 368MHz, 768MHz, 806MHz, 1024MHz, 1.2GHz, 1.4GHz, 1.5GHz, 1.7GHz, 1.8GHz, 1.9GHz & 2.0GHz
- Available CPU Governors Smartass v2, Lionheart, Conservative, Performance, On demand, lulzactive, scary, intellidemand, LagFree, Lazy & SavagedZen
- Available CPU Schedulers Simple I/O, Deadline, CFQ, Noop, BFQ & V(R)
- Available File Systems EXT3, EXT4, CIFS, NTFS (with UTF-8)
- Default Settings On Demand governor @ 245-1024MHz, Simple I/O scheduler
- Improved tolerance for low strength Wi-Fi
- Sweep2Wake
- DeepSleep enabled
- VDD Interface
Known Bugs
Please report any bugs you find, and I will endeavour to fix them
- There are several issues when using with IceColdSandwich, the camera will be very glitchy and the keyboard will be too large to fit on-screen
Planned Features
If it's in this list, please don't ask for it, I am aware and will be adding it when I can
- USB OTG Support
- USB Host
- 2-Way Call Recording
Don't forget to thanks this post if you like my work! Donations are not requested or expected, but are greatly appreciated ​
Click to expand...
Click to collapse
Changelog
29/08/12 - XS ICS v2.2
- Patched up to 3.0.42 (thanks to cjoliver)
- VDD Interface added
- Added 6 new governors: lulzactive, scary, intellidemand, LagFree, Lazy & SavagedZen
29/08/12 - XS ICS v2.1
The only way is up!
- Sweep2Wake fixed and fully implemented!
- USB OTG implemented (needs testing)
- Force unknown cable to be treated as A/C (should help with in-car chargers)
- Wi-Fi module issues should now be resolved
28/08/202 - XS ICS v2.0
Things can only get better...
- Switched to Koush's AnyKernel for maximum ROM compatibility (thanks to tpbklake for the suggestion)
- Patched up to 3.0.41 (big thanks to amidabuddha and mdeejay!)
- Added sweep2wake disabled by default, see below to enable, needs testing (thanks to show-p1984 for the functionality and coolexe for the patch to Amtel)
- Add BFQ v4 and V(R) I/O Schedulers (SIO still default)
- Wi-Fi PM = Fast
- Improved tolerance for low strength Wi-Fi
- Added extra values to CPU table (courtesy of amidabuddha)
24/08/202 - XS ICS v1.0
We're back baby!
- Inital Release
Click to expand...
Click to collapse
Instructions for S-OFF Users
Simply flash XS-ICSvX.X.zip in your favourite recovery!
Instructions for manual flashing (HTCDev.com unlocked S-ON Users)
Thanks to MrToastbrot for instructions
Step 1: Download the XS-Kernel.zip, then open the Zip on your computer and extract the file mkbootimg.sh in "kernel"
Step 2: Open mkbootimg.sh in a texteditor like notepad++ or notepad, then edit the following in line 3:
Code:
output /tmp/newboot.img
to
Code:
output /sdcard/newboot.img
Step 3: Save your edited file and place it back in your zip, copy your modified zip to your phone-sdcard and install it in the recovery. Then reboot your phone and connect it to pc and take the newboot.img from the root of the sdcard.
Step 4: Now reboot your phone into bootloader and flash it via fastboot flash boot newboot.img
Step 5: Once you phone has booted, mount the system as r/w using something like ES file explorer or Root explorer, then type the following:
Code:
adb push bcm4329.ko /system/lib/modules
Set permissions to rw-r--r--, reboot and enjoy!
Sweep2Wake: Q&A
Q: How do I disable / enable the feature?
A: Two options
Change the value in the file /sys/android_touch/sweep2wake to either 0 for disabled, 1 for enabled and 2 for enabled with backlight. This will be reset upon rebooting.
If your ROM supports init.d scripts, then flash the zip to enable or disable, this will stick over a reboot.
Q: It keeps taking screenshots when I lock the screen!?
A: This is due to an incompatibility with this feature and the native screenshot in Sense. TO stop the screen shots, you need to edit your build.prop and change the property ro.htc.framework.screencapture to false, and then reboot.
l0st.prophet said:
- 2-Way Recording
Click to expand...
Click to collapse
I'm using the miui v4 with nik's kernel and that function already work!
I'm wrong assuming it's already coded?
BTW good work!
Nice post, fast work. I'll have a play first chance I get. Thank you.
Nice. Downloading right now. Making a backup right now since I was thinking of flashing this new Google Now ZIP as well.
Also does this mean we can get CWM 6.0+? IIRC, one of the requisites for it was a ICS kernel to be able to compile it. Correct me if I'm wrong.
Which ROMs is it support?
MIUI will work whit this kernel?
Sent from my Incredible S using xda app-developers app
I have an S-OFF Vivo, so how do I flash this? Do I just install the zip from CWM?
I'm currently on IceColdSandwich, so what's the difference between the kernel used in that and this kernel?
Forgive my noobness but how is the file size only 100kb?
I have only test on MIUI v4, but it should work with any ROM, I would like some feedback if there are any ROM's it doesn't work with.
There is now a flashable zip on the first post, I made a proper schoolboy error when I first uploaded it, that is now fixed
l0st.prophet said:
I have only test on MIUI v4, but it should work with any ROM, I would like some feedback if there are any ROM's it doesn't work with.
There is now a flashable zip on the first post, I made a proper schoolboy error when I first uploaded it, that is now fixed
Click to expand...
Click to collapse
Thanks sir, great work!
Sent from my Incredible S using xda app-developers app
TheDareDevil said:
I have an S-OFF Vivo, so how do I flash this? Do I just install the zip from CWM?
I'm currently on IceColdSandwich, so what's the difference between the kernel used in that and this kernel?
Forgive my noobness but how is the file size only 100kb?
Click to expand...
Click to collapse
This is just a new kernel, that is why it is so small.
Did you read the OP and the second post? The instructions can be found there.
TheDareDevil said:
I have an S-OFF Vivo, so how do I flash this? Do I just install the zip from CWM?
I'm currently on IceColdSandwich, so what's the difference between the kernel used in that and this kernel?
Forgive my noobness but how is the file size only 100kb?
Click to expand...
Click to collapse
There is now a proper zip you can flash, check the second post for instructions.
The kernel in Ice Cold Sandwich is a Gingerbread kernel (2.6.x) which was modified to work with ICS (rather awesomely by Kaijura I might add). This kernel is built from the latest 3.0 sources.
Oh sweet! How did you manage to do it so fast?
One last question, none of my data will be lost right?
TheDareDevil said:
Oh sweet! How did you manage to do it so fast?
One last question, none of my data will be lost right?
Click to expand...
Click to collapse
I have been waiting for this since the OTA dropped
No data will be lost, but I would backup in case there is an issue with your install.
l0st.prophet said:
There is now a proper zip you can flash, check the second post for instructions.
The kernel in Ice Cold Sandwich is a Gingerbread kernel (2.6.x) which was modified to work with ICS (rather awesomely by Kaijura I might add). This kernel is built from the latest 3.0 sources.
Click to expand...
Click to collapse
Working smooth like butter on IceColdSandwich 8.4,one change is that my keyboard is larger
Sent from my Incredible S using xda premium
Awesome work!! I'm on miui v4 and Wi-Fi is working great but I ain't getting my mobile data working am I missing something?
I just flashed the zip. And I'm s-off.
Sent from my HTC Incredible S using xda app-developers app
Works great! Thanks a lot!)
Great work man!!!
I think that you can delete 1.7GHz, 1.8GHz, 1.9GHz & 2.0GHz
Because they are unstable
ragzdincs said:
Working smooth like butter on IceColdSandwich 8.4,one change is that my keyboard is larger
Sent from my Incredible S using xda premium
Click to expand...
Click to collapse
Shouldn't affect anything like that, can you flash back the original boot.img to confim it goes away?
lundberg512 said:
Awesome work!! I'm on miui v4 and Wi-Fi is working great but I ain't getting my mobile data working am I missing something?
Sent from my HTC Incredible S using xda app-developers app
Click to expand...
Click to collapse
Mobile data works fine for me, again shouldn't be affected by the kernel. I know MIUI has some issue with data anyway, check the thread in general to see how to fix that, but if that doesn't work, let me know.
Alex-stroev said:
Great work man!!!
I think that you can delete 1.7GHz, 1.8GHz, 1.9GHz & 2.0GHz
Because they are unstable
Click to expand...
Click to collapse
Different chips are more resiliant. I used to have one that could sustain 1.8GHz with no problem, but I sent it for repair as the screen got smashed, they sent a replacement and this one can't go over 1.5GHz without crashing instantly, the option is there for anyone who wants it though.
IceColdSandwich 8.3: looks good, only broke camera and rotate buttons, but I expected it
Edit: doesn't work gps and bluetooth, IceColdSandwich either has a lot of hacks, or would need it
Working fine here. Now to see how high of a OC I'm willing to work with hehe.

[KERNEL] [4.4] Werewolf kernel v008 [15/02/2015] SM-T210(R) and T211

Hey guys
As you already might have read in either the CM11 dev thread or the Q&A section, I am working on a custom kernel for our T210(R) and T211. It's still in a pretty early stage, but the current build is fully stable, so I thought why not share it
As I'm pretty new to this community, a few words about myself: My (only) device I have been working on is the LG Optimus 4x HD, for which I also made a custom kernel (also named werewolf kernel, who would have thought of that ). Me and 2 other fellow RDs were able to "switch" many blobs with the ones from grouper, which fixed many, many issues we were facing in 4.4 with the stock 4.1 blobs. I am the official maintainer of namelessROM and vanir for the 4x HD, and am also compiling GummyROM, LegoROM, unofficial CM 11 (using grouper blobs) and SlimKat for the 4x HD on a nightly base. And as soon as we have a proper device tree for our tab, I'm sure I can port the Tab3 to all those ROMs
Now, enough chit chatting, let's talk about the kernel
It's based on @ketut.kumajaya's blackhawk kernel (thanks again, mate ) From v004 on we are based on official KitKat sources, with some additions such as:
Features:
Various network tweaks
Entropy tweaks
I/O speed improvements
cortex a9 and neon omtimizations
Added frandom
Tweaked vm dirty ratios
Dynamic read-ahead values
Added I/O schedulers: ROW, SIO, BFQ, FIOPS, V(R)
Optimized AES and SHA1 routines
Added CPU governors: Lionheart, Adaptive, Intellidemand, Hotplug, Hyper
Reduced RAM usage from logger
Updated lowmemkiller
Overclocked to 1.420 GHz by default
Disabled vsync for better 2D performance
Overclocked GPU up to 624MHz (default 416MHz)
Custom user voltage control (CPU)
Undervolted by default (-25mV)
S2W and DT2W (WIP)
Fast Charging
KSM
Bugs:
You tell me!
Installation:
Download the kernel from HERE
Reboot into recovery (recommended to make a nandroid)
Flash the kernel zip
Recommended to wipe /cache
Reboot and enjoy!
And remember to remove phservice if you want to change some CPU/GPU settings yourself
Notes:
See 2nd post
GPL:
Kernel sources
Kernel Modules (only for v001 - v003)
Used defconfig
Used build script
Thanks:
@ketut.kumajaya for the initial kernel base
@gr8nole for general help, info and testing
XDA:DevDB Information
Werewolf kernel SM-T210/T211, Kernel for the Samsung Galaxy Tab 3
Contributors
laufersteppenwolf
Kernel Special Features: Tuned for best possible performance
Version Information
Status: Stable
Created 2014-07-21
Last Updated 2015-05-25
Tweaks and other stuff
Since v002, we have an updated lowmemorykiller. It behaves a bit snappier than the old one, also with the default minfree values. However, in case you like to tweak your device a bit to make it even more snappy (like me ), I tweaked the minfree values a bit to slightly increase the free RAM without really affecting the multitasking experience. The script can be found in the attachment. All you need to do is to extract the script and place it in your /system/etc/init.d/ folder and that's it. The values will be automatically set on boot.
UV interface
The min possible voltage is 1000mV for now, and the max one is 1400mV. If you want me to lower the min voltage, please let me know.
Also, please note, that the voltage has to be changed in 12.5mV steps. If you apply for example 1110mV, it will be rounded down to 1100mV.
Fast Charge interface
The main interface is inside /sys/kernel/fast_charge/*
/sys/kernel/fast_charge/force_fast_charge (rw)
0 - disabled (default)
1 - use custom mA configured through the sysfs interface (see below)
/sys/kernel/fast_charge/ac_charge_level (rw)
rate at which to charge when on AC (1.8A to 2.3A)
/sys/kernel/fast_charge/usb_charge_level (rw)
rate at which to charge when on USB (0.5A to 1.0A)
/sys/kernel/fast_charge/failsafe (rw)
0 - disabled - allow anything up to 2.3A to be used as AC / USB custom current (USE WITH CAUTION!)
1 - enabled - behaviour as described above (default)
/sys/kernel/fast_charge/version (ro)
display fast charge version information
New kmsg layout
From v008 onwards the kmsg looks a tiny bit different. Instead of displaying the time since boot, it logs the actual time and date.
Now, you may ask yourself: "does that any good?" Sure it does. When you encounter an issue and grab a log, you can send it my way saying "the issue happened at 15:35". It is way harder to find out the exact time (in seconds) since the device booted, right?
When changing the CPU gov, you might want to keep THIS (4.1) or THIS (4.4) in mind
Changelog:
v008 [15/02/15]
- Disabled zcache
- Added KSM (including deferred timer to save battery)
- Tweaked zRAM
- New kmsg log layout (see 2nd post for more details)
- Fixed kernel version in settings
- Disabled S2W and DT2W by default
When you flash this version, please wipe cache, otherwise bad things could happen
v007 [08/12/04] RIP Beth
- Slightly more RAM from logger
- S2W and DT2W (Still WIP)
- Decreased min possible CPU voltage to 800mV
- Undervolted by default (-25mV)
- Fast Charge support
v006 [01/11/14] MOAH CPU
- Added CPU UV interface
- OC'ed further to 1420MHz
- Max GPU freq limited to 624MHz until all issues are resolved
- Fixed init.d support on T211
v005a Minor fix
- Fixed DeviceControl GPU support
- Output all GPU freqs in Hz instead of KHz
v005 [18/10/2014] SM-T211 support
- Added support for the T211 variant (thanks to @sscsps for testing)
- Merged latest Sammy updates
- Enabled I/O accounting (only needed for devs)
- zcache enabled by default
- GPU OC up to 624MHz (default is 416MHz)
v004 [25/09/2014] Android 4.4 support
- Re-based on latest KitKat sources
- Re-added almost all features from v003
- Removed 156MHz freq step (causing trouble for still unknown reasons)
- Overclocked to 1.344 GHz (instead of 1.205GHz)
- Disabled vsync for better 2D performance
- Disabled "reboot recovery" to avoid being stuck in recovery on old recoveries (special version)
v003 [31/08/2014]
- new govs: Hotplug, Hyper
- new freq step @ 156MHz
v002 [25/07/2014]
- reduced RAM usage from logger
- new/updated lowmemkiller (see attachment in 2nd post for init.d script with tweaked minfree values)
v001 [18/07/2014]
- initial release
good work you link where ? and nice job workıng 4.1.2 ???? 4.2.2 .4.4.2 kernel android version what? @safariking [MENTION=3034891]gr8nole[/MENTION
not working dont flash ı using ultimate rom safarinking by 4.1.2 soft brick device
Not working yet hope you get it working good luck
Sent from my SPH-L720 using XDA Premium 4 mobile app
sorry guys, I just found the issue... my last commit breaks the GPU module so it doesn't compile, doesn't get copied over into the zip and so does not get replaced on your system, but the new kernel cannot load the stock module as I used another defconfig name...
Will be fixed ASAP
EDIT: Fixed and uploaded
laufersteppenwolf said:
sorry guys, I just found the issue... my last commit breaks the GPU module so it doesn't compile, doesn't get copied over into the zip and so does not get replaced on your system, but the new kernel cannot load the stock module as I used another defconfig name...
Will be fixed ASAP
EDIT: Fixed and uploaded
Click to expand...
Click to collapse
Nice work. This kernel works. Will monitor battery life and game performance.
Sent from my SM-T210R using XDA Free mobile app
laufersteppenwolf said:
When changing the CPU gov, you might want to keep THIS in mind
Click to expand...
Click to collapse
is there anyway to flash it on tab 3 t211 kk 4.4.2 firmware
big job thank can you add overclock gpu ? downclock?
gr9nole said:
big job thank can you add overclock gpu ? downclock?
Click to expand...
Click to collapse
You can check if there is OC available by installing "No-Frills CPU Control" from the google play store
a question about toolchain
@laufersteppenwolf
hi, i would like to know which toolchain you used to build this kernel, a direct link to it would be helpful.
also, using the supplied defconfig can i make [defconfig] and then make -j# or are there additional things to do?
i build kernel for tab3 10 fine but setting up my system for sm-t210 is proving stubborn. there is another project going on
that i would like to learn from and help with, your help would be appreciated.
thank you for reading.
m
Anil Shovo said:
is there anyway to flash it on tab 3 t211 kk 4.4.2 firmware
Click to expand...
Click to collapse
I do not think so, as I'm using the ramdisk from t210, which most likely isn't compatible with t211, and sure not with 4.4.2
gr9nole said:
big job thank can you add overclock gpu ? downclock?
Click to expand...
Click to collapse
step by step
moonbutt74 said:
@laufersteppenwolf
hi, i would like to know which toolchain you used to build this kernel, a direct link to it would be helpful.
also, using the supplied defconfig can i make [defconfig] and then make -j# or are there additional things to do?
i build kernel for tab3 10 fine but setting up my system for sm-t210 is proving stubborn. there is another project going on
that i would like to learn from and help with, your help would be appreciated.
thank you for reading.
m
Click to expand...
Click to collapse
for this build, I used CM's 4.6 toolchain, but that'll change soon
I will also push the build script and modules to github ASAP, so just wait for that, as setting up the modules and stuff isn't the most pleasant thing to do
Werewolf is not playing lol so what your saying is that we will be having cm 11 and aosp all the good stuff soon ?
Sent from my SM-T210 using XDA Premium 4 mobile app
I've used this kernel for 2 days. I have noticed the screen flickers on the 2nd day and while watching a movie (while plugged in) the tab was battery drained battery was 30% when I started watching. Can others confirm this?
Goodside. Battery life is enhanced and performance is the same. Nice work on this
Sent from my SM-T210R using XDA Free mobile app
trazfer said:
I've used this kernel for 2 days. I have noticed the screen flickers on the 2nd day and while watching a movie (while plugged in) the tab was battery drained battery was 30% when I started watching. Can others confirm this?
Goodside. Battery life is enhanced and performance is the same. Nice work on this
Sent from my SM-T210R using XDA Free mobile app
Click to expand...
Click to collapse
I was experiencing the exact same flickering myself as well, but on stock kernel
This flickering isn't kernel related, but ROM related. Sammy must have screwed up the auto backlight handling, as it only happens at some certain brightness values
No ir blaster
Edit: This is what I get when I open peel smart remote
laufersteppenwolf said:
I was experiencing the exact same flickering myself as well, but on stock kernel
This flickering isn't kernel related, but ROM related. Sammy must have screwed up the auto backlight handling, as it only happens at some certain brightness values
Click to expand...
Click to collapse
He is tottaly right, also sometimes when you are using this tab, the screen locks by itself
Ripshock said:
No ir blaster
Edit: This is what I get when I open peel smart remote
Click to expand...
Click to collapse
Check your build.prop to see what the ro.build.product shows.
gr8nole said:
Check your build.prop to see what the ro.build.product shows.
Click to expand...
Click to collapse
I am using stockrom series with a build for sm-t210 but I have used device spoofer and spoofed my original build sm-t210r
Ripshock said:
I am using stockrom series with a build for sm-t210 but I have used device spoofer and spoofed my original build sm-t210r
Click to expand...
Click to collapse
It works for me with the stock firmware/rom with this kernel.

Categories

Resources