Related
Hey guys,
Trying to help a buddy at work unlock his driod1 - he updated to FFRG22D - now any of the single click root methods do not work..
My phone is a nexus1 and did not have these issues: As I am not a Droid owner / user I am hoping people in the forums here help to get him rooted.
I would like to get him on to ClockWork - so we can flash CM6 on his droid.
Can someone point me to a good guide to rooting this?
Cheers,
hey if he is OTA FRG22D can you please post his build.prop file for me to take a look at, it can be found under /system on phone memory, i am working out a market fix for rooted frg01b users like my self, i wont update until after frg22d is rooted for real but i can spoof the version and fingerprint if i have that file contents
i found what i was looking for after a while, thanks.
vitosans said:
Hey guys,
Trying to help a buddy at work unlock his driod1 - he updated to FFRG22D - now any of the single click root methods do not work..
My phone is a nexus1 and did not have these issues: As I am not a Droid owner / user I am hoping people in the forums here help to get him rooted.
I would like to get him on to ClockWork - so we can flash CM6 on his droid.
Can someone point me to a good guide to rooting this?
Cheers,
Click to expand...
Click to collapse
Have you had any luck? My buddy had his phone replaced and the new one has this update, but he would like me to root it again for him.
can you not just download the old froyo, put it in the sd as update.zip, flash that then root?
FRG22D hotspot app
I have the OTA FRG22D stock unrooted. In-order to root it, I used the following procedure, from droidforums:
"Root Droid 1 - regardless of OS version". After installing the custom recovery:
"MC1_A855_1282081087_Recovery-Only_SPRecovery_0.99.3b.sbf", I was then successful installing a wifi hotspot app
bpickens said:
I have the OTA FRG22D stock unrooted. In-order to root it, I used the following procedure, from droidforums:
"Root Droid 1 - regardless of OS version". After installing the custom recovery:
"MC1_A855_1282081087_Recovery-Only_SPRecovery_0.99.3b.sbf", I was then successful installing a wifi hotspot app
Click to expand...
Click to collapse
little bit more than that but +1. Thanks for that thread though, trying to root a friend of mines Droid after he got that frd22 build it wont let him use rootme
Check this link for both Odexed/DeOdexed rooted builds of FRG22D:
peteralfonso.com/p/downloads.html
Sent from my Droid using XDA App
So to root I just rename the file to update.zip and install it that way?
Sent from my SAMSUNG-SGH-I897 using XDA App
The one click root apps do not work with FRG22D. The exploit those apps used was patched with this release.
The FRG01B & FRG22B stock/odex/deodex only work for devices that are already rooted. Meaning that if you do manage to imstall them you will not have root.
You need to do a *sbf* back to 2.1 or2.01.
root droid regardless of os version.
http://www.droidforums.net/forum/droid-labs/74028-root-droid-1-regardless-os-version.html
Sent from my Droid using XDA App
look around for motocache post
Installed latest stock
Flashed Sprecovery
Flashed his package which roots and disables the attempt at the droid to unroot
well, ****. I'm new so I can't post outside links yet, but go to droidforums and search "[HowTo] Root, Deodex, and Theme Droid Froyo 2.2 FRG22D"
worked fine for me, no issues so far.
Use the rsdlite process, hold the x down on your phone when it says rebooting
Sent from my HTC Magic using XDA App
I'm new to the Droid 1 I came from the Eris and it is easy!!!!
Okay so I did it with out even having internet on my pc or Linux laptop which thank god I finally got internet today!!!! Use the rageagainstthecage-arm5.bin method... Super easy I actually downloaded using my D1 transfered file from my phone to Linux laptop and changed the Windows commands to Linux commands and it worked and then I went in to market and flashed Clockwork!!!! Oh and yes I'm on FRG22D the phone came as a replacement for my Eris and it already had this build on it... PM me if you have any questions...
hi all,
i just get used moto droid, i check the firmware seems already using FRG22D
how to check wheter my phone has been rooted or not ?
thanks before
Try using a root required free app from the market and if you are root it will work if your not it wont... Easy as that!!!!
May UniversalAndroot works?
Sent from my XT702 using XDA App
Hexchain said:
May UniversalAndroot works?
Sent from my XT702 using XDA App
Click to expand...
Click to collapse
It doesn't.
The method that RodNoc_eR just mentioned above just worked for me. Here's the link again: http://www.droidforums.net/forum/droid-labs/74028-root-droid-1-regardless-os-version.html
for those of you who are doing this the complicated way, THERE IS a ONE-CLICK METHOD, since I cant post links, Google SuperOneClick, download and find instructions, its pretty much as easy as downloading the .zip, extracting it to where ever you want, right click on SuperOneClick application and Run as Administrator, make sure USB debugging is checked, DO NOT mount as USB storage device, click root button on the program, let it do its thing, and wa-la!
You have acheived root! Be sure to download the Custom Recovery of your choice, which is as easy as DLing Rom Manager from the Market and flashing ClockworkMod, I just did this and am now happy I spent time searching and not typing commands into the SDK, super easy and it works for the DROID 1 FRG22d, I just did it.
Enjoy!
Keep getting 2.2.1 updates after root. How can this be stopped? Its annoying to keep rooting only to get the system updates again and again. I'm rooting with a signed fr91 file. Any way to stop this?
Sent from my Nexus One using XDA App
Upgrade to 2.2.1 frg83 then use the one click super root to root 2.2.1 you won't get the update any more u can find it in nexus wiki
Sent from my Nexus One using XDA App
Download 'Quick Boot' from the market and use it to reboot the phone. Then, clear the update notification from the notification menu. The update message should go away for a while (mine lasted a week before it came back).
I'm still somewhat hesitant to upgrade to FRG83 and use SuperOneClick since some people in the thread are reporting problems. I love my phone how it is right now!
kornball said:
Download 'Quick Boot' from the market and use it to reboot the phone. Then, clear the update notification from the notification menu. The update message should go away for a while (mine lasted a week before it came back).
I'm still somewhat hesitant to upgrade to FRG83 and use SuperOneClick since some people in the thread are reporting problems. I love my phone how it is right now!
Click to expand...
Click to collapse
Do manual rage root ... no problems.
nexusdue said:
Do manual rage root ... no problems.
Click to expand...
Click to collapse
Agreed!
Sent from my Nexus One using XDA App
nexusdue said:
Do manual rage root ... no problems.
Click to expand...
Click to collapse
Are you and Memnoch30 referring to the post you laid out in another thread? I'm pretty sure you wrote detailed instructions on how to do the manual rage root using adb. Will this method work fine if all I want is to run stock 2.2.1 with root-requiring apps like setcpu and move2sd enabler? Sorry for being such a noob
kornball said:
Are you and Memnoch30 referring to the post you laid out in another thread? I'm pretty sure you wrote detailed instructions on how to do the manual rage root using adb. Will this method work fine if all I want is to run stock 2.2.1 with root-requiring apps like setcpu and move2sd enabler? Sorry for being such a noob
Click to expand...
Click to collapse
Yes: Instructions
But read the whole thread to make sure you know what you are doing!!
Any other options? I'm not going to fr83 and unfamiliar with rage root.
Sent from my Nexus One using XDA App
Why don't you install a custom rom and be done with it.
Big_O said:
Any other options? I'm not going to fr83 and unfamiliar with rage root.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
I just installed 2.2.1 and used the SuperOneClick method to root the phone again. I had to turn the phone off, run the program, and then boot the phone for it to work. I suggest you try this method. It couldn't be much simpler.
Now i keep getting the new firmware update message and i cant seem to turn it off even with the quickboot. Any ideas?
Install the update, root again. Now really, this "idea" is 1 message above yours - what made you post?
Hm i tried to update but failed, could be due to tampering of the build number that I did previously but after that it didn't bug me anymore, at least not for now. Will try the superoneclick one next time. Thanks.
It might be back in several days, but if you've tampered with the system and advanced the build number - it shouldn't appear anymore.
yeah i sure hope so. will know in a few days
Just got my Nook today, and am interested in rooting it. I'm looking for the best method to do so.
I have rooted my HTC Inspire using Bubby's one click method, so I'm not completely unfamiliar with the process, but want to make sure of the preferred method for the Nook before I started.
Any and all insight would be appreciated.
This is what I did: http://wiki.cyanogenmod.com/wiki/Barnes_&_Noble_Nook_Color:_Full_Update_Guide
It was easier than hide-and-go-seek against helen keller.
Sent from my NookColor using XDA Premium App
This is what I and many, many others have used. As far as I am concerned this is the best guide for installing cm7 on the nook color.
http://forum.xda-developers.com/showthread.php?t=1030227
SCrid2000 said:
This is what I did: http://wiki.cyanogenmod.com/wiki/Barnes_&_Noble_Nook_Color:_Full_Update_Guide
It was easier than hide-and-go-seek against helen keller.
Sent from my NookColor using XDA Premium App
Click to expand...
Click to collapse
OK, great thank you. I know have CM7 running on my Nook. What version of Google apps do I need to get the Market installed?
Pope Viper said:
OK, great thank you. I know have CM7 running on my Nook. What version of Google apps do I need to get the Market installed?
Click to expand...
Click to collapse
I just use the version room manager has.
There's a post for the new market here in the nook forums, but I can send you the apk if you can't find it.
Sent from my NookColor using XDA Premium App
That would be appreciated, things I'm wanting to do:
- Market (I've got various items I paid for, that I would like to try).
- Fix ROM Manager, when trying to download, I get "Must upgrade...", then a force close. I'm assuming this is because I don't have the paid version installed, which I can download from Market (since I purchased it)
- Install Amazon Kindle (for the irony factor).
Any insight would be great, since I'm obviously new at this (I've owned my Nook for about 15 hours)
Pope Viper said:
- Fix ROM Manager, when trying to download, I get "Must upgrade...", then a force close. I'm assuming this is because I don't have the paid version installed, which I can download from Market (since I purchased it)
Click to expand...
Click to collapse
I used the method described in Cyanogen's wiki and had the same issue. I ended up having to install through recovery instead of ROM Manager.
So is rom manager not working for you?
I'm sure there's about a million download links for this, but il make our ready for you
Google apps zip, to be flashed from cwm: http://db.tt/gF1hrau
Sent from my NookColor using XDA Premium App
OK, I am now officially pissing myself. I am now able to get into Clockwork Recovery, I've wiped Factory/Cache/Dalvik, applied CM, and after a system reboot, it just goes back into recovery.
Help!
I am not having any luck whatsoever, and am afraid I bricked my device.
I've attempted to do a CM install (http://wiki.cyanogenmod.com/wiki/Barnes_&_Noble_Nook_Color:_Full_Update_Guide), but after putting the image on, and rebooting, it goes to black, but never comes back up.
Not sure what to try at this point.
OK, something new, I was able to return back to 1.0.1, but when I get to step 5 of setup, it indicates there is a problem, and to call B&N. It reports that the serial number, model number, and Mac address ing as "MISSING", and it is at version 1.0.1.
I do have a blue dot on the box.
New method found at http://forum.xda-developers.com/showthread.php?p=19390207#post19390207
If you run this and it doesn't root you try wiping data from Setting>privacy and wipe the internal storage as well. I did that and it worked for me. Granted I didn't try this method without wiping my internal. If nothing else it cleans it up for you.
Were do I click run.bat?
I've been Revolted!
RootedUser said:
Were do I click run.bat?
I've been Revolted!
Click to expand...
Click to collapse
In the zip file.
Alright thanks
I've been Revolted!
mtmichaelson said:
The newest root method. I know there are several right now, but this puts it all in one place! This should take care of those with the file already exists errors.
Click to expand...
Click to collapse
Ok, so whatever changes you made ... it seems to work better in a virtual windows environment
Before it would get stuck at "daemon started succesfully"
now it goes through to "Installing Root Tools..."
but then I get a string of error messeages
either "device offline" or "device not found"
then "cleaning up" ... device not found
then "rebooting" ...device not found
then it freezes
when I unplug my device or toggle debugging mode it continues to say "root complete"
.... so close.
So If I'm rooted on Z4? then I still need to unroot and upgrade to Z6 for this to work?
Thanks a lot man for such this easy one-click-root tool.
Thanks mt! Worked great first time! You are the savior of the LG Revolution.
Does this mean I have to start donating 10% of my pay??
borborpa said:
Thanks mt! Worked great first time! You are the savior of the LG Revolution.
Does this mean I have to start donating 10% of my pay??
Click to expand...
Click to collapse
My tithe is 20% but I'll take what I can get, lol!!!
Sent from my VS910 4G using xda premium
ok dumb question here....is this run from a terminal screen in windows or from the LG updater program.....I have been following all of the chaos in the last couple days and have seen multiple ways to try this, don't want to bork my phone
thanks in advance
scott
scotttkd said:
ok dumb question here....is this run from a terminal screen in windows or from the LG updater program.....I have been following all of the chaos in the last couple days and have seen multiple ways to try this, don't want to bork my phone
thanks in advance
scott
Click to expand...
Click to collapse
Just unzip the zip file, go into the new folder, click run.bat and follow what it says on the screen.
Sent from my VS910 4G using xda premium
scotttkd said:
ok dumb question here....is this run from a terminal screen in windows or from the LG updater program.....I have been following all of the chaos in the last couple days and have seen multiple ways to try this, don't want to bork my phone
thanks in advance
scott
Click to expand...
Click to collapse
You just click the Run.bat in mt's zip folder. It runs in cmd.
EDIT: Damn you mt for beating again....
!!!!!!!!!!!!!YEAH BABY YEAH!!!!!!!!!!!!!!!!
I updated the SDK on my Mac and tried again the manual way found here
http://androidforums.com/esteem-all-things-root/435750-one-click-root-updated-final-w-superuser-3-0-6-binary-3-0-3-download.html
AND IT WORKED .... I'M ROOTED AGAIN!!!!!!
I am sure I should know this answer, but what mode do I need to set the phone in when I connect to the computer? I'm assuming mass storage mode is not going to fly.
ufkal said:
I am sure I should know this answer, but what mode do I need to set the phone in when I connect to the computer? I'm assuming mass storage mode is not going to fly.
Click to expand...
Click to collapse
Internet connection
Sent from my VS910 4G using xda premium
AWESOME Kane!!! way to go. and No you need the phone to be in internet/debugging mode
mtmichaelson said:
Internet connection
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
Thanks getting my GB update now. Soon some root goodness!
thank you mt and haro....the cmd window was what I wasnt clear on....downloading the GB update to my phone right now after running mt's stock rooted method, so far so good.
thanks again for all the hard work going on here
scott
i updated to v7... ran this..it keeps telling me root is successful it cleans up n then reboots.. i see superuser i try and update it n it fails when trying to gain root access.. also opened titanium backup and cannot gain root... any suggestions?
This is an All-in-One package to Root and install CWM Recovery or to UnRoot and install the stock recovery. I have spent many hours trying to modify this to be as easy as possible for all to accomplish their goals whether by modding or returning to stock.
What is This?
This is an exploit built by the Revolutionary team, that was ported to the Esteem by djrbliss, then I was able to fix permissions and install su and superuser. The exploit is not built by me, rather by the Revolutionary guys. This zip contains the proper drivers for the Revolution, all root files, and the Root&Recovery.bat file. The .bat has been modified to fix ANY of the problems people are having with root, and will make it so that CWM will stick through reboot. It installs the newest versions of the su binary and Superuser.apk. It will also install ClockWorkMod Recovery also (no need to run RevoToolkit anymore). The unroott will uninstall and delete the su binary and remove Superuser.apk. It will also remove CWM and install the stock ZV7 recovery.img. If there are any problems, just let me know.
Click to expand...
Click to collapse
How Do I Root and Install CWM?:
1) Download zip and extract
2) Install drivers if not already installed
3) Click Root&RecoveryAIO.bat
4) Select what you would like to do
Click to expand...
Click to collapse
Download:
http://www.mediafire.com/?d3czi7n649churx
Click to expand...
Click to collapse
Special Thanks:
The Revolutionary guys for the exploit
Koush for CWM
PlayfulGod for coordinating with me on the updated CWM
thecubed for the postrecovery.sh
Click to expand...
Click to collapse
Donations
For those that enjoy the work that I have done and would like to support my efforts financially through the donate to me button, any amount is appreciated, but all that I ask is that if you like my work, please hit the thanks button!!!
Click to expand...
Click to collapse
mtmichaelson said:
This is an All-in-One package to Root and install CWM Recovery or to UnRoot and install the stock recovery. I have spent many hours trying to modify this to be as easy as possible for all to accomplish their goals whether by modding or returning to stock.
Click to expand...
Click to collapse
Do I have to use this bat every time i want to recovery?
Only you do. Everyone else just has to use it once lol!!!
mtmichaelson said:
Only you do. Everyone else just has to use it once lol!!!
Click to expand...
Click to collapse
VS910 4G Kangwich
This is awesome mt, I wish you weren't already married. =[
jamRwoo said:
This is awesome mt, I wish you weren't already married. =[
Click to expand...
Click to collapse
Ahhhhh, you're too sweet lol
Sent from my VS910 4G using xda premium
nice job mt. subscribing to thread.
any problems
Has anyone had any problems trying to run the clockwork recovery?
leppricon said:
Has anyone had any problems trying to run the clockwork recovery?
Click to expand...
Click to collapse
What kind of problem?
Sent from my VS910 4G using xda premium
When I reboot into CWM I just get a black screen after the LG logo disappears.
ms157858 said:
When I reboot into CWM I just get a black screen after the LG logo disappears.
Click to expand...
Click to collapse
And you used this package for root?
Sent from my VS910 4G using xda premium
NM... I downloaded it the other day before you updated it. In my rush to root, I forgot to download the updated version... Sorry - been a long week!
ms157858 said:
NM... I downloaded it the other day before you updated it. In my rush to root, I forgot to download the updated version... Sorry - been a long week!
Click to expand...
Click to collapse
No that's cool! I just wanted to make sure its working, lol!
Sent from my VS910 4G using xda premium
Guys I'm trying to get back to 100% to get Gingerbread. I was able to get follow the steps from here:
http://forum.xda-developers.com/showthread.php?t=1326347
I got the stock ROM and recovery back, I was able to search and download the first update, but I cannot find the gingerbread update.
And I still have Root and none of the programs seem to work to unroot it, they always get stuck at psneuter or whatever.
I ran this program and it removed root but during the process it showed a lot of "Failed"s
Still cannot find the Gingerbread update under "about phone---->software update---->check new. Says no update available. Anyone help me out?
Bob_Bobber0 said:
Guys I'm trying to get back to 100% to get Gingerbread. I was able to get follow the steps from here:
http://forum.xda-developers.com/showthread.php?t=1326347
I got the stock ROM and recovery back, I was able to search and download the first update, but I cannot find the gingerbread update.
And I still have Root and none of the programs seem to work to unroot it, they always get stuck at psneuter or whatever.
I ran this program and it removed root but during the process it showed a lot of "Failed"s
Still cannot find the Gingerbread update under "about phone---->software update---->check new. Says no update available. Anyone help me out?
Click to expand...
Click to collapse
This is not for froyo you may have to use lgnpst with the zv7 tot file.
Sent from my VS910 4G using xda premium
Got it working!! Thanks guys woohoooooo GingerVolt Madness!
I just wanted to see what i might be doing wrong...
I can't get the root.bat to recognize the device, I have uninstalled the drivers and reinstalled, but still am not able to see device ( I can see drives if I set to mass storage, so I know I am connected)
The Revo is brand new out of the box from VZW and froyo ver 2.2.2. Do I need to be on a different OS ver. to get this to work ?
Thanks in advance.
rockinr6 said:
I just wanted to see what i might be doing wrong...
I can't get the root.bat to recognize the device, I have uninstalled the drivers and reinstalled, but still am not able to see device ( I can see drives if I set to mass storage, so I know I am connected)
The Revo is brand new out of the box from VZW and froyo ver 2.2.2. Do I need to be on a different OS ver. to get this to work ?
Thanks in advance.
Click to expand...
Click to collapse
It should work on 2.2, but 2.3 is out, so I would try to get the update first.
Make sure USB debugging is enabled.
Sent from my VS910 4G using xda premium
Downloading the update now, will see if I can get this mofo working after that...
Thx!
I'm sorry in advance it this sounds uneducated but will this work if I have gingerbread 2.3.4 stock?
Sent from my VS910 4G using Tapatalk