[Q] If I am running stock 2.1 eclair can I load a 2.2 rom or does that not work? - Captivate Q&A, Help & Troubleshooting

Can someone please post a response?

You can load a Froyo rom. Just go to the development section and find one you like.

Yes you can, view this forum for all custom ROMs: http://forum.xda-developers.com/forumdisplay.php?f=706
My personal favorite is Cognition.

Related

[Q] Don't wanna brick my phone.......Please, advise...

I have done reading a lot of post recently.
I brick'ed my cappy once, I reflash the stock kernel, and it came back alive.
After that, I managed flashing my I897 into Foyo 2.2 and with Cog 2.4.1 Rom.
So far so good.
I am still very afraid of brick my cappy again.
So, I decided post question here, just to clear my mind.
If I wanna flash it into an I9000 Rom from Cog 2.4.1 Rom
What are the right steps ??
My current system config is listed here
Firmware 2.2
Baseband Version - I897 UCJJ4
Kernel Version - 2.6.32.9
Build Number - Cognition. v2.4.1
The best thing you can do is decide which i9000 Rom you want to flash to and read the OP of that thread for exactly how to flash. It is gonna require both odin and clockwork though. Which Rom are you wanting to go to?
Sent from my SAMSUNG-SGH-I897 using XDA App
Gurgs said:
The best thing you can do is decide which i9000 Rom you want to flash to and read the OP of that thread for exactly how to flash. It is gonna require both odin and clockwork though. Which Rom are you wanting to go to?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
From your opinion, which I9000 Rom is most popular ?? (This might be the best one i think)
Is it ganna be better than Cog's I897 rom ??
Really I prefer to stick with cognition but there is no denying that setirons kernel is the best one going right now but it doesn't play well with cognition. If I was going to go i9000 I would use mikeymikes conversion of docs Rom...it looks really nice and everyone in that thread loves it.

[Q] CM7 on Captivate with Firefly rom

Ok guys, I already have Firefly rom installed on my captivate and would like to know what I have to do. Do I have to uninstall the firefly rom first?
read the instructions in the OP of the cyanogen installation thread, it clearly states how to install the ROM (and nowhere does it say anything about going back to stock)

[Q] New on android and I had problems with kernel talondev

Hi all,
I'm new to android and some things I do not understand, for example I have the galaxy captivate with the following characteristic:
Rom Android 2.3.4 I897UCKH3
boog_kh3_kernel3
su-2.3.2-efgh-bin-signed.zip
I updated my cellphone using these files, and all works fine but I wanted install a new kernel the last talondev, but after install it I think that my sgs is on soft bricked, displays the logo of AT & T and then starts "loading talon...", but then restarts.
This kernel can be used with the rom? it is compatible? or What should I do to choose a kernel?
Best regards
Talon is I9000 port kernel you are using native I897 rom. Use Samurai, Corn kernel or Boog's kernel. Actually Im not sure there is a corn or samurai kernel for KH3. I know they have it for KJ roms.
I have to find kernels for KH3, right?
Thanks
Correct. Or update to a newer leak like KJ3 as a example.
And I can change to a custom rom? or that such the cm7 rom?
I talk to do this to exit the soft brick and have it back.
thanks
CM7 has its own special instructions. I haven't kept up with it so go to their thread and read. But ya you can change to custom roms like Fusion IX, Fasty and others that are based of a newer firmware version.
RanuTo said:
And I can change to a custom rom? or that such the cm7 rom?
I talk to do this to exit the soft brick and have it back.
thanks
Click to expand...
Click to collapse
You need to flash back to boog kernel. If this does not work it is best you re-flash to stock KH3 with the one-click solution here. http://forum.xda-developers.com/showthread.php?t=1300843
Choose the one WITHOUT bootloaders since you already have those on the phone. It is safer that way.
Regarding CM7 ROMs. You must know they are completely different system compared to the normal Captivate ROMs. Read this thread before flashing:
http://forum.xda-developers.com/showthread.php?t=978150
Don't get me wrong. THEY ARE VERY GOOD CUSTOM ROMs...absolutely. But you cannot mix and match.....Follow CM7 instructions strictly.
thanks for the replies, I will be reading information about their opinions.
thank you very much , I'll let you know the results.
chappatti said:
You need to flash back to boog kernel. If this does not work it is best you re-flash to stock KH3 with the one-click solution here. http://forum.xda-developers.com/showthread.php?t=1300843
Choose the one WITHOUT bootloaders since you already have those on the phone. It is safer that way.
Regarding CM7 ROMs. You must know they are completely different system compared to the normal Captivate ROMs. Read this thread before flashing:
http://forum.xda-developers.com/showthread.php?t=978150
Don't get me wrong. THEY ARE VERY GOOD CUSTOM ROMs...absolutely. But you cannot mix and match.....Follow CM7 instructions strictly.
Click to expand...
Click to collapse
Why would you send him to the nightly page and not the 7.1 stable current nightlys are a bit broken.
I am not amused by your phones performance

[Q] Which are the best 2.1 ECLAIR roms for the Captivate?

Which are the best 2.1 ECLAIR roms for the Captivate? I've been using a 2.2 rom and it's very slow. I've been searching for 2.1 custom roms without succeeding. Does somebody knows a good 2.1 rom for the captivate?
rpgdev said:
Which are the best 2.1 ECLAIR roms for the Captivate? I've been using a 2.2 rom and it's very slow. I've been searching for 2.1 custom roms without succeeding. Does somebody knows a good 2.1 rom for the captivate?
Click to expand...
Click to collapse
You wont find any custom 2.1, only 2.2 and above. Just out of curiosity, why do you want to go SO far backwards?
I reasoned that it will be smoother on the captivates hardware. How come that there isn't any 2.1 roms?
Cuz it is 2.1... We had froyo and no body cared about 2.1. Now we have 4.0.3
Thread closed.
The best ROMs are those in current development, and are subjective no matter what platform they're built on. Do your own research and find one that works for you.

[Q] GT-i9000 Most "samsung" ICS rom?

Hello dear XDA fellows.
I know questions like these are not very popular but I am on very short time to research and experiment. Also, not familiar with Galaxy S i9000 rom scene at all.
I need a rom for this phone, which will be used by a complete newbie to android/smartphones/touchscreens, so I cant expect them to know anything about tweaks or launchers.
I need a rom that is stable, looks most stock/Touchwiz (and/or feature rich) and preferably ICS. Preferably a port of SGS2 ICS or even modified SGS GB builds are fine.
Phone is currently running some CM9 ics build and is rooted. Thank you all for your recommendations
If you want GB try stock jw8 + semaphore kernel.
You can find the latest stock roms in ramads thread. Search it in the general section. You can find there all the instructions on how to flash with odin.
Cheers,
If this post helped you, click on the "thank you" button.
MobileFirmware.com addict and Nexus 4 user

Categories

Resources