Instructions on how to flash lg gt540 with android 2.1 - GT540 Optimus Android Development

This is a guide on how to flash lg gt540 with android 2.1 open europe edition (there are also uk and orange roms) with integrated fastboot.
Things you'll need:
rom with fastboot:http://forum.xda-developers.com/showthread.php?t=828003
lg gt540 hacker :http://forum.xda-developers.com/showthread.php?t=812308
(actually you only need KDZ_FW_UPD program , but the original program is in russian the program inside lg gt540 hacker is translated into english)
if you want quarx 2.1 black edition then
quarx system.img:http://rghost.ru/2898235
Step 1: Preparing pc
Download and install android sdk
install lg driver:http://www.megaupload.com/?d=INEH3FZS
Note if you aren't using the installer you might wanna copy adb.exe , adbwinapi.dll and fastboot.exe to system32 and register them as paths
Step 2 repare the phone
This step is the easiest just go to applications\development settings and turn on debugging mode
Then backup the data on the phone and you're done
Step 3: FLASHING!
!!!WARNING!!!!
BY FOLLOWING THESE INSTRUCTIONS YOU'LL VOID YOUR WARRANTY. ALSO THERE IS A HUGE RISK OF BRICKING YOUR PHONE BEYOND REPAIR . I'M NOT RESPONSIBLE FOR ANY KIND OF DAMAGE YOU DO TO YOUR PHONE BY FOLLOWING MY INSTRUCTIONS.THE FACT THAT THEY WORKED FOR ME DOESN'T MEAN THAT THEY WILL WORK FOR YOU.
Download and extract the rom of your choice from the link above.
Download and extract lg hacker (note lg hacker is not made by me so the credits for it don't go to me)
open start.bat and choose number 6 rom updater.
follow the instructions the program gives you if you don't have mxml sp3 parser
install it .
After the updater starts make sure that windows enabler is runing in the tray
open it if not (it's inside the lg hack folder in rom updater folder)
then click on the tray icon and it should say on click on it again if not.
THIS IS IMPORTANT CHANGE TYPE TO 3GQCT.
ALSO IMPORTANT BEFORE FLASHING DISABLE LGE ANDROID USB MODEM DEVICE IN DEVICE MANAGER
click browse and browse to your rom and select it
wait and hope it works.
click Launch software update .
Wait and hope it works
After flashing is done disconnect and restore your backup
If you want quarx black edition
1. reboot in fastboot (CAMERA+POWER)
2. put adbwinapi.dll , fastboot.exe and system.img in one folder
3. open cmd window in that folder and type : fastboot.exe -w
fastboot.exe erase system
fastboot.exe flash system system.img
fastboot.exe reboot
CONGRATULATIONS
IF YOU FOLLOWED ALL THE STEPS CORRECTLY YOU SHOULD NOW HAVE A PHONE WITH QUARX 2.1 BLACK EDITION CUSTOM ROM ON IT CAPABLE OF
OVERCLOCKING AND UNDERCLOCKING AND OTHER THINGS
if you didn't follow correctly and you bricked your phone don't panic
just repeat step3 and change diag mode in kdz flasher to cs emergency.
i hope this helps

Yeah... eh... thanks?!
Dont see any sence of this thread

grazie... from italia.

I know that there exist other instructions like this but those instructions didn't work for me so i posted the one that did
Sent from my GT540 using XDA App

Probelm
I bricked my phone when i was make a mistake downgraiding from 2.1 to 1.6.
Now the phone shows me only download mode (LG GT540).
I try to update firmare again and it shows me that and nothing goes on.
[R&D Test Tools Log File]
12:28:33 : Launching SW update
12:28:33 : Unpacking KDZ
12:28:36 : KDZ file extraced
12:28:38 : Files were extracted.
12:28:38 : LGMobileDL Load.
12:28:38 : Port = -1
12:28:38 : Connecting to phone
12:28:48 : Check Phone mode = 1
12:29:07 : Phone type check.......
12:29:11 : LGMobileDL.DLL Loading....
12:29:11 : _SetAuthMark Fail
12:29:11 : AuthMark°ˇ Á¤Č®Č÷ Phoneżˇ Write µÇÁö ľĘľŇ˝Ŕ´Ď´Ů!
12:29:11 : _SetAuthMark Fail
12:29:11 : LoadCDMAPhoneData() Error
12:29:11 : _DetachDLL Call
12:29:11 : _DetachDLL Call End
12:29:11 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\DZ_GT540AT-00-V20b-BAL-XXX-SEP-13-2010.dz
12:29:11 : Param : moduleDir =
12:29:11 : Param : waitTime = 0
12:29:11 : Param : UsbHighSpeed = 1
12:29:11 : Param : PhoneMode = 1
12:29:11 : Param : BinVersion = V20B_00
12:29:11 : Param : AuthMark = 0
12:29:11 : Call fn_StartUpgrade
12:29:21 : Smart : wParam = 3, lParam = 0
12:29:21 : Smart : wParam = 205, lParam = 0

Problem
I bricked my phone when i was make a mistake downgraiding from 2.1 to 1.6.
Now the phone shows me only download mode (LG GT540).
I try to update firmare again and it shows me that and nothing goes on.
[R&D Test Tools Log File]
12:28:33 : Launching SW update
12:28:33 : Unpacking KDZ
12:28:36 : KDZ file extraced
12:28:38 : Files were extracted.
12:28:38 : LGMobileDL Load.
12:28:38 : Port = -1
12:28:38 : Connecting to phone
12:28:48 : Check Phone mode = 1
12:29:07 : Phone type check.......
12:29:11 : LGMobileDL.DLL Loading....
12:29:11 : _SetAuthMark Fail
12:29:11 : AuthMark°ˇ Á¤Č®Č÷ Phoneżˇ Write µÇÁö ľĘľŇ˝Ŕ´Ď´Ů!
12:29:11 : _SetAuthMark Fail
12:29:11 : LoadCDMAPhoneData() Error
12:29:11 : _DetachDLL Call
12:29:11 : _DetachDLL Call End
12:29:11 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\DZ_GT540AT-00-V20b-BAL-XXX-SEP-13-2010.dz
12:29:11 : Param : moduleDir =
12:29:11 : Param : waitTime = 0
12:29:11 : Param : UsbHighSpeed = 1
12:29:11 : Param : PhoneMode = 1
12:29:11 : Param : BinVersion = V20B_00
12:29:11 : Param : AuthMark = 0
12:29:11 : Call fn_StartUpgrade
12:29:21 : Smart : wParam = 3, lParam = 0
12:29:21 : Smart : wParam = 205, lParam = 0

Just some questions:
"After flashing is done disconnect and restore your backup"
How do i restore my backup? And why should i?
"2. put adbwinapi.dll , fastboot.exe and system.img in one folder"
Where can i find adbwinapi.dll ?

dewide said:
"After flashing is done disconnect and restore your backup"
How do i restore my backup? And why should i?
Click to expand...
Click to collapse
For installed apps + usersettings. If u want to reinstall all apps and set them up again, u dont need to backup.
Best apps for this are "titanium backup" or "mybackup".

Okey, thank you!
Followed the rest of the guide and everything works perfect
Thank you! <3

Likewise, everything went well for me just now, thanks for the guide.

It worked perfectly fine for me too. My phone showed the "Emergency" Screen a couple of times, did some reboots and the whole process took quite a few minutes, but I just left it and now it has 2.1 on it.
THANKS AGAIN!

Heaiii Dude Thank you so much This was my First Flash And it Worked Perfect But i go For Open swift 2.2.1 now Sorry But i Need Danish and MoreLocale Does not work :c

oookey can i use this tutorial when my phone is 2.1 and its not custom rom i installed with lg updater so its not modded in any ways besides its rooted

1. reboot in fastboot (CAMERA+POWER)
2. put adbwinapi.dll , fastboot.exe and system.img in one folder
3. open cmd window in that folder and type : fastboot.exe -w
fastboot.exe erase system
fastboot.exe flash system system.img
fastboot.exe reboot
i need help with this bit..
can anyone please tell me how to open a cmd window in that folder..
or tell me a more detailed steps to put blacksystem on
thanks

Related

[Q] plz help my p970 ...Brick!

My phone was rooted by gingerbreak v1.2 and I used titanium back up to delete some apps. I have deleted some important system apps so I restart my p970.
It just gives me a Lg logo and not works. I followed the instructions and used the
B2CAppSetup to reover my phone. I use my 32bit computer and 64bit laptop to recover......but it's doesn't work!!
I think I should enter the recovery mode and download an offical rom ? right?
Can anyone tell me how to fix it?
The main problem is that I don't know what's the first step....I don't know how to enter the recovery mode!!
Thx a lot ...my friends
Use 32bit system. Will be much easier.
0 - download LG mobile support Tool. Install drivers before you connect phone.
1 - download KDZ Updater:
http://forum.xda-developers.com/attachment.php?attachmentid=420545&d=1287222698
2 - unzip KDZ into KDZ folder on desktop. Install MSXML.MSI.
3 - download ROM to folder KDZ on desktop:
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP970/ANEUTL/V10b_00/V10B_00.kdz
4 - remove battery from phone
5 - push VolUp button and connect usb cable. You will see "S/W update" on the screen. Then you can free VolUp button. Wait until all the drivers install. Disable LG Modem in windows hardware manager (Start -> Search -> devmgmt.msc -> hit enter -> expand Modems -> rightclick on LG Modem -> disable)
4 - launch KDZ Updater as admin (rightclick -> Run as administrator)
5 - click folder icon on the right part of window -> point to downloaded .kdz firmware file -> Ok
6 - on the bottom of window you will see Read phone information. Click it.
7 - click start update. DO NOT CLICK ANYTHING ELSE.
8 - wait and pray
9 - when flashing is finished phone will restart
Sorry for my english
my phone is driving me crazy, cant downgrade
mgregor said:
Use 32bit system. Will be much easier.
0 - download LG mobile support Tool. Install drivers before you connect phone.
1 - download KDZ Updater:
http://forum.xda-developers.com/attachment.php?attachmentid=420545&d=1287222698
2 - unzip KDZ into KDZ folder on desktop. Install MSXML.MSI.
3 - download ROM to folder KDZ on desktop:
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP970/ANEUTL/V10b_00/V10B_00.kdz
4 - remove battery from phone
5 - push VolUp button and connect usb cable. You will see "S/W update" on the screen. Then you can free VolUp button. Wait until all the drivers install. Disable LG Modem in windows hardware manager (Start -> Search -> devmgmt.msc -> hit enter -> expand Modems -> rightclick on LG Modem -> disable)
4 - launch KDZ Updater as admin (rightclick -> Run as administrator)
5 - click folder icon on the right part of window -> point to downloaded .kdz firmware file -> Ok
6 - on the bottom of window you will see Read phone information. Click it.
7 - click start update. DO NOT CLICK ANYTHING ELSE.
8 - wait and pray
9 - when flashing is finished phone will restart
Sorry for my english [/QUOTE
hi, i already flashed my phone once with all the procedures you mention but somehow i bricked it while changing the theme on the boot menu so i had to do an emergency flash on it and somehow now i cant seem to downgrade it again. it always fails and gives me this message.
14:42:59 : A verificar a ligação com o telefone móvel...
14:42:59 : dwWaitResetTime(40000 ms)
14:43:00 : Phone Mode(2)
14:43:00 : *****GetPhoneType Start*****
14:43:00 : Phone Type : OMAP_IFX
14:44:00 : *****GetPhoneBinaryVersion Start*****
14:44:00 : *****Get ESN / IMEI / MEID Start*****
14:44:00 : ESN/IMEI/MEID : 356772041604012
14:44:01 : Phone type Compare start
14:44:01 : *****CheckPCSyncPrograms Start*****
14:44:02 : PCSyncPrograms Not Found - OK and ready to upgrade
14:44:03 : ****************CheckAndDownload****************** **
14:44:03 : ******Extract Start C:\Users\sergio\Desktop\VDP_VODAFONE(PORTUGAL).LGP 970.V10A_00.kdz*****
14:44:03 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
14:44:03 : File Size = 239985437
14:44:10 : Extract kdz file Success.
14:44:14 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V10A.wdb\n
14:44:14 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\V10A.wdb )
14:44:14 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\LGP970.dll\n
14:44:14 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\LGP970.d ll)
14:44:14 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\V10A.wdb)
14:44:14 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGP970.dl l)
14:44:14 : Extract End C:\Users\sergio\Desktop\VDP_VODAFONE(PORTUGAL).LGP 970.V10A_00.cab
14:44:15 : ------------------Model.dll Information-------------------
14:44:15 : Filename : LGP970.dll
14:44:15 : Version : 1.0.0.2
14:44:15 : File size : 262144
14:44:15 : File date : 2011/04/05-23:43:32
14:44:15 : PC Created date: 2011/09/16-14:44:14
14:44:15 : ----------------------------------------------------------
14:44:15 : *****Check LGCM Programs Start*****
14:44:15 : LGCM Programs Not Found - OK and ready to upgrade
14:44:16 : *****WorkModelDLL Start*****
14:44:19 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone \V10A.wdb)
14:44:19 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
14:44:19 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LG P970.dll)
14:44:19 : _DetachDLL Call
14:44:19 : _DetachDLL Call End
14:44:19 : Call fn_StartUpgrade
14:44:19 : Type = OMAP_IFX
14:44:19 : ********* 2Chip Model.dll input Parameter*************
14:44:19 : MODEL_EVENT : 32769
14:44:19 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V10A.wdb
14:44:19 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
14:44:19 : BootWaitTime : 49500
14:44:19 : UsbHighSpeed : FALSE
14:44:19 : PhoneMode : 2
14:44:19 : NewPhoneBinVersion : VDP_VODAFONE(PORTUGAL).LGP970.V10A_00
14:44:19 : ClearSI : FALSE
14:44:19 : AuthMark : 0
14:44:19 : ********* 2Chip Model.dll input Parameter End*************
14:44:24 : wParam : 2004, lParam = 7
14:44:25 : Step : TYPE_WPARAM_IFX_DN_POS
14:44:25 : wParam : 2007, lParam = 0
14:44:26 : Step : TYPE_WPARAM_READ_FILES
14:44:26 : wParam : 2010, lParam = 3002
14:44:26 : CleanModelDll() : Free Model.dll
14:44:26 : _DetachDLL Call
14:44:26 : _DetachDLL Call End
14:44:26 : Page_Error ºÎºÐÀÔ´Ï´Ù
14:44:26 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
thank you very much for your help so far and in the future too...
Click to expand...
Click to collapse
skylinegt77 said:
C:\Users\sergio\Desktop\VDP_VODAFONE(PORTUGAL).LGP 970.V10A_00.kdz*****
Click to expand...
Click to collapse
Rename those long file name to V10A_00.kdz
try to download rom with 10c european it did the trick for me and my LG is back alive .
Since my black aways had 10c since the beginning. So find the good ROM with match the version you originally had in your tel.
I can't post a link here so i have to find it your self
cheers !!!
You should try THIS.
I tried all above process ... still I am getting black screen on my screen nothing else .... can you please guide me ....
Thanks in advance
vamshikrushna said:
I tried all above process ... still I am getting black screen on my screen nothing else .... can you please guide me ....
Thanks in advance
Click to expand...
Click to collapse
Hello , I have the same problem. did u find any solution
My LG OPTIMUS Black is tuck at LG LOGO. actually it all came after i installed xionia recovery. After rebooting, it never goes forward, always stuck at LG LOGO. I tried LG mobile update recovery, Flashzip tools using APbin and CP Binfiles, also tred with KDZ files.. but all in vain. Can any body help me please. I am really nervous. thanks in advance

problems flashing back to stock rom from CM7

After flashing CM7 nightly and moving back to stock I can flash stock rom only once
What i mean is when trying 2nd time to flash stock rom from stock rom with R&D tool kit it gets stuck and doesnt finish off
So i can flash to stock say 10c coming from CM7 nightly
butn when im on 10c if i want to flash to 10D or any other version it just doesnt complete process of flashing and stays at previous rom
Dont know what im missing maybe any help would be appreciated thanks
So as a mater of facts the problem is not after flashing back from CM 7 but from flashing from stock to stock changing the name of the thread it will get a better reply on your issue.
And as an answer to your question... hard to answer I suppose that you did all the steps with clear cache clear data etc.
A better description of the steps you do when you encounter the issue will bring you a better answer.
Regards,
Me
Have you tried factory resetting it?
Laier94 said:
Have you tried factory resetting it?
Click to expand...
Click to collapse
Cleared cache dalvick reset data done everything
It never used to do this will try and get copy of log when trying to flash 2nd time
Just aswell this is my 2nd phone
here is the message i get , weird iv flashed phoned several times before using r&d method with no probs before
12:06:37 : [C:\LGMobileUpgrade] Try to delete folder
12:06:37 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
12:06:37 : Start Date : 2011-12-21 12:06:37
12:06:37 : ---------- QM CSE Testmode ---------
12:06:37 : ---------- CSE mode ---------
12:06:37 : ***** Check Tool Version *****
12:06:37 : Tool version : 1.5.4.4
12:06:37 : UpgradeDLL version : 1.2.6.5
12:06:37 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
12:06:37 : LGE USB Driver Version : 4.9.7.0
12:06:37 : Android PDLV Version : 2.2
12:06:37 : Android NDLV Version :
12:06:37 : ******************************************
12:06:37 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
12:06:37 : SetEmerModeAT()
12:06:37 : *****CheckOS Start********
12:06:37 : Microsoft_Windows7_Professional_
12:06:37 : *****CheckPCSyncPrograms Start*****
12:06:38 : PCSyncPrograms Not Found - OK and ready to upgrade
12:06:38 : Checking the connection with the cell phone...
12:06:38 : dwWaitResetTime(40000 ms)
12:06:39 : _IsConnectedPhone Call
12:07:00 : _IsConnectedPhone(2)
12:07:00 : 0 - NotConnected.
12:07:00 : 1 - Normal connect success
12:07:00 : 2 - Emergency connect success
12:07:00 : Phone Mode(2)
12:07:01 : *****CheckPCSyncPrograms Start*****
12:07:02 : PCSyncPrograms Not Found - OK and ready to upgrade
12:07:03 : ****************CheckAndDownload********************
12:07:03 : ******Extract Start C:\Users\Mani\Downloads\EUROPE.OPEN.LGP970.V10E_00.kdz*****
12:07:03 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
12:07:03 : File Size = 240079641
12:07:05 : Extract kdz file Success.
12:07:06 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V10E.wdb\n
12:07:06 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\V10E.wdb)
12:07:07 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\LGP970.dll\n
12:07:07 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\LGP970.dll)
12:07:07 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\V10E.wdb)
12:07:07 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGP970.dll)
12:07:07 : Extract End C:\Users\Mani\Downloads\EUROPE.OPEN.LGP970.V10E_00.cab
12:07:07 : ------------------Model.dll Information-------------------
12:07:07 : Filename : LGP970.dll
12:07:07 : Version : 1.0.0.2
12:07:07 : File size : 262144
12:07:07 : File date : 2011/04/05-23:43:32
12:07:07 : PC Created date: 2011/12/21-12:07:06
12:07:07 : ----------------------------------------------------------
12:07:07 : *****Check LGCM Programs Start*****
12:07:07 : LGCM Programs Not Found - OK and ready to upgrade
12:07:08 : *****WorkModelDLL Start*****
12:07:10 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V10E.wdb)
12:07:10 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
12:07:10 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGP970.dll)
12:07:10 : _DetachDLL Call
12:07:10 : _DetachDLL Call End
12:07:10 : Call fn_StartUpgrade
12:07:10 : Phone mode change -> CSE
12:07:10 : ********* CDMA Model.dll input Parameter *************
12:07:10 : MODEL_EVENT : 32769
12:07:10 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V10E.wdb
12:07:10 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
12:07:10 : BootWaitTime : 49500
12:07:10 : UsbHighSpeed : FALSE
12:07:10 : PhoneMode : 4
12:07:10 : NewPhoneBinVersion : EUROPE.OPEN.LGP970.V10E_00
12:07:10 : ClearSI : FALSE
12:07:10 : AuthMark : 0
12:07:10 : ********* CDMA Model.dll input Parameter End*************
12:07:15 : wParam : 2004, lParam = 7
12:07:15 : MODEL DLL Event : (2004, 7)
12:07:16 : Model Dll Msg Not Found(2004, 7)
12:07:16 : wParam : 2007, lParam = 0
12:07:16 : MODEL DLL Event : (2007, 0)
12:07:17 : Model Dll Msg Not Found(2007, 0)
12:07:17 : wParam : 2010, lParam = 3002
12:07:17 : MODEL DLL Event : (2010, 3002)
12:07:17 : Model Dll Msg Not Found(2010, 3002)
Maybe you can flash *.bin,this is full size rom.But when i flash from 10c to 10D ,i has done and could work.You'd better cheak your steps carefully.
JasonQMe said:
Maybe you can flash *.bin,this is full size rom.But when i flash from 10c to 10D ,i has done and could work.You'd better cheak your steps carefully.
Click to expand...
Click to collapse
Figured it out
now this is weird the software kdz files i had previously downloaded from another sited work , but recently iv been downloading from filesonic and none of their kdz files are working for my phone at all now downloaded and tried them all
anyway thanks people but they all work fine now
didnt realise i had origina downloads on other harddrive
this thread can be closed now
maniAK- said:
Figured it out
now this is weird the software kdz files i had previously downloaded from another sited work , but recently iv been downloading from filesonic and none of their kdz files are working for my phone at all now downloaded and tried them all
anyway thanks people but they all work fine now
didnt realise i had origina downloads on other harddrive
this thread can be closed now
Click to expand...
Click to collapse
So basically,the the kdz file you flashed with earlier wasn't working,so you downloaded a new kdz file,flashed it with the new one,and it worked? Simple as that?
Keep only "V10E_00.kdz" as firmware name.
Sent from my LG-P970
12:07:03 : ******Extract Start C:\Users\Mani\Downloads\EUROPE.OPEN.LGP970.V10E_00 .kdz*****
Click to expand...
Click to collapse
rgabi is right
Been flashing Samsung Galaxy S1 and 2 for so long now little bit different from this phone , feel like such a noob now and thanks for pointing it out

[Q] LG updater error

Hey I am from greece, got an optimus 2x. I learned about the ics update downloaded the p990 drivers and the tool for update. I connect the device and it says that a new update is available. Let me say here i change the first option from US into EUROPE. I click update and it loads some stuff and then it says preparing upgrade and after 1 minute or something it says An error occure while connecting to the phone. I have changed usb ports uninstalled and installed the p990 drivers etc etc. restarted the pc as well... but keep gettin the same error.. anyone got any idea to help me out?
Try PC Suite IV, or launch Support Tool manually. Still won't update
Alda1981 said:
Hey I am from greece, got an optimus 2x. I learned about the ics update downloaded the p990 drivers and the tool for update. I connect the device and it says that a new update is available. Let me say here i change the first option from US into EUROPE. I click update and it loads some stuff and then it says preparing upgrade and after 1 minute or something it says An error occure while connecting to the phone. I have changed usb ports uninstalled and installed the p990 drivers etc etc. restarted the pc as well... but keep gettin the same error.. anyone got any idea to help me out?
Click to expand...
Click to collapse
Try using PC Suite IV if you aren't already. I had to disconnect my phone from usb, reconnect, then immediately hit connect on the PC Suite to get it to work.
If it still doesn't, just run the Mobile Support Tool on its own. You may have to turn off&on debugging mode on your phone before it will read the version and model.
I still can't update though. PC Suite tells me there is an update, while Support Tool tells me there isn't. Below is a picture to show what I think is the Support Tool half thinking my phone is already V30A. Any Ideas? Maybe I've made a first-time noob mistake
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've exactly the same problem... !
The same problem in Slovakia. In Update History I see v30A but updater shows V20Q and says that Im on newest version. Bravo LG!
How To Update To V30A/ICS on O2X/Optimus 2x/P990
Alright then...I got my O2X updated and it was not easy. I'll try and provide the best steps I can. THIS IS NOT A CUSTOM FIRMWARE. I thought it was too, until I saw the LG R&D tool at the end of all this...
UPDATED INSTRUCTIONS - If you are in the process of doing this, check the new step 4
1. Get the All-In-One tool and extract it somewhere.
-I suggest doing a backup if you haven't already. Run this tool to do so - it has a program that will compress your internal/external sd for you.
+I used MyBackup (on market) to backup and restore all my data.
2. Download: V30A from here
3. Make sure there is at least 1 free line at the end of your hosts file (GIYF if you don't know what it is).
4. Set the lock delay/screen timeout on the phone to 30 minutes and make sure it isn't in USB mass storage mode. Stops the driver failing
5. Run the LG Update Tool through "P990-Toolkit.cmd" (located where you extracted all-in-one tool) - option 6.
-If it fails when you press "Normal web upgrade test" in the R&D tool - either your hosts file is wrong or the apache server didnt set itself up right.
+Make sure you added that free line in your hosts file. Otherwise, fix the details the program added (will be at end of last non-free line)
+I don't know what you can do in the second case other than setup your own apache server which is what I did (I had one).
-If it fails at around 6% with a device not connected error, DO NOT DO STEP 10 IN THE DOCUMENT. Very high chance of bricking.
+Make sure you set the lock delay/screen timeout to 30 mins and that the phone isn't in mass storage mode.
6. Wait about 10-15 mins. Don't worry - it does take a while to reboot afterwards.
7. On my behalf, enjoy the update and dont complain about it the second you see lag or something else ridiculous like that.
-If you do have a problem, search the forum. Like the intro video says, your probably not special
Proof that it works:
-M1cr0man
any help please? now i have v28e.
m1cr0man said:
Alright then...I got my O2X updated and it was not easy. I'll try and provide the best steps I can. THIS IS NOT A CUSTOM FIRMWARE. I thought it was too, until I saw the LG R&D tool at the end of all this...
1. Get the All-In-One tool and extract it somewhere.
-I suggest doing a backup if you haven't already. Run this tool to do so - it has a program that will compress your internal/external sd for you.
+I used MyBackup (on market) to backup and restore all my data.
2. Download: V30A from here
3. Make sure there is at least 1 free line at the end of your hosts file (GIYF if you don't know what it is).
4. Run the LG Update Tool through "P990-Toolkit.cmd" (located where you extracted all-in-one tool) - option 6.
-If it fails when you press "Normal web upgrade test" in the R&D tool - either your hosts file is wrong or the apache server didnt set itself up right.
+Make sure you added that free line in your hosts file. Otherwise, fix the details the program added (will be at end of last non-free line)
+I don't know what you can do in the second case other than setup your own apache server which is what I did (I had one).
5. Wait about 10-15 mins. Don't worry - it does take a while to reboot afterwards.
6. On my behalf, enjoy the update and dont complain about it the second you see lag or something else ridiculous like that.
-If you do have a problem, search the forum. Like the intro video says, your probably not special
-M1cr0man
Click to expand...
Click to collapse
Thank you, I followed your instructions and everything went OK.
Now I can enjoy ICS finally
m1cr0man said:
Alright then...I got my O2X updated and it was not easy. I'll try and provide the best steps I can. THIS IS NOT A CUSTOM FIRMWARE. I thought it was too, until I saw the LG R&D tool at the end of all this...
1. Get the All-In-One tool and extract it somewhere.
-I suggest doing a backup if you haven't already. Run this tool to do so - it has a program that will compress your internal/external sd for you.
+I used MyBackup (on market) to backup and restore all my data.
2. Download: V30A from here
3. Make sure there is at least 1 free line at the end of your hosts file (GIYF if you don't know what it is).
4. Run the LG Update Tool through "P990-Toolkit.cmd" (located where you extracted all-in-one tool) - option 6.
-If it fails when you press "Normal web upgrade test" in the R&D tool - either your hosts file is wrong or the apache server didnt set itself up right.
+Make sure you added that free line in your hosts file. Otherwise, fix the details the program added (will be at end of last non-free line)
+I don't know what you can do in the second case other than setup your own apache server which is what I did (I had one).
5. Wait about 10-15 mins. Don't worry - it does take a while to reboot afterwards.
6. On my behalf, enjoy the update and dont complain about it the second you see lag or something else ridiculous like that.
-If you do have a problem, search the forum. Like the intro video says, your probably not special
-M1cr0man
Click to expand...
Click to collapse
I don't understand the free line in the host, I search on Google, have no idea what to do.
I'm going crazy!! I tried this way and it gives me an error, I tried another one and it oppened the LG Update Tool wich tells me that my phone is up to date, I really don't know what to do, I'm going nuts.
I'm attaching a screenshot of the error I'm having
Will this work for indian lg optimus 2x p990
Hey guys, will this update work for india customers of the lg optimus 2x....I am downloading it but i am scared to update it. I hope my phone doesn't get bricked by installing this update.
Please help...
juzers42 said:
Hey guys, will this update work for india customers of the lg optimus 2x....I am downloading it but i am scared to update it. I hope my phone doesn't get bricked by installing this update.
Please help...
Click to expand...
Click to collapse
It will work in India, intact I'd say it will work anywhere (don't blame me if you are outside Europe and it fails though ). As for the Bricking fear, you simply won't brick it doing this. The program used to flash the device in this method is an official LG program so it is very reliable. I had the same fear at the time as well, so don't worry.
frikou said:
I don't understand the free line in the host, I search on Google, have no idea what to do.
I'm going crazy!! I tried this way and it gives me an error, I tried another one and it oppened the LG Update Tool wich tells me that my phone is up to date, I really don't know what to do, I'm going nuts.
I'm attaching a screenshot of the error I'm having
Click to expand...
Click to collapse
As far as I remember reading, you must turn off UAC on windows and be in an administrator account. This looks like what may be wrong since the error you got was "permission denied".
As for the hosts file, go into c:\windows\system32\drivers\etc\ and open the file "hosts" with notepad. Then just make sure there is at least one free line at the bottom of it.
Hope this helps, feel free to ask if you need more help.
Sent from my LG-P990 running ICS using xda app-developers app
Thanks
Thanks m1cr0man, for the quick and positive response...will let you know after flashing it how it works.....
m1cr0man said:
As far as I remember reading, you must turn off UAC on windows and be in an administrator account. This looks like what may be wrong since the error you got was "permission denied".
As for the hosts file, go into c:\windows\system32\drivers\etc\ and open the file "hosts" with notepad. Then just make sure there is at least one free line at the bottom of it.
Hope this helps, feel free to ask if you need more help.
Sent from my LG-P990 running ICS using xda app-developers app
Click to expand...
Click to collapse
Thanks a lot for your help, nonetheless, the error still appears
This is what I did: I edited the host file to add that line at the bottom with notepad and since it only let me save a .txt file I deleted the extension and replaced the original file.
Then I deactivated User Account Control and rebooted, I'm using an Administrator account but the error still appears.
I attached the three screens I get after choosing option 6 in the ToolKit.
I guess I'm still a noob after all..
Edit: I followed the file where the error was held and took a look of it with Notepad++ (see attachment 4) and that error took me to the lines that were going to edit the host file to add this one: "127.0.0.1 csmg.lgmobile.com", so I tried to do it myself manually, I added that line in the host file and it worked! But, (yeah, there's still a but), when I got to the end of everything, just when it went off to install the update, the program told me that the battery level of my phone was too low and that I must charge it first I had 43% of battery left. Haha, but yeah, at least it's working, I'm going to give it a shot after the phone is done charging, wish me luck!
frikou said:
Thanks a lot for your help, nonetheless, the error still appears
This is what I did: I edited the host file to add that line at the bottom with notepad and since it only let me save a .txt file I deleted the extension and replaced the original file.
Then I deactivated User Account Control and rebooted, I'm using an Administrator account but the error still appears.
I attached the three screens I get after choosing option 6 in the ToolKit.
I guess I'm still a noob after all..
Edit: I followed the file where the error was held and took a look of it with Notepad++ (see attachment 4) and that error took me to the lines that were going to edit the host file to add this one: "127.0.0.1 csmg.lgmobile.com", so I tried to do it myself manually, I added that line in the host file and it worked! But, (yeah, there's still a but), when I got to the end of everything, just when it went off to install the update, the program told me that the battery level of my phone was too low and that I must charge it first I had 43% of battery left. Haha, but yeah, at least it's working, I'm going to give it a shot after the phone is done charging, wish me luck!
Click to expand...
Click to collapse
First of all the error you get is not a script error but a runtime error, meaning that something in your PC is wrong.
Since I wrote that script and I know what it does, do NOT forget to re-edit the hosts file after and remove the line, because csmg.lgmobile.com will always be off-line for you.
It is needed only for the LG tool to flash a kdz file off-line without checking LG database.
Good luck and let me know.
frikou said:
Edit: I followed the file where the error was held and took a look of it with Notepad++ (see attachment 4) and that error took me to the lines that were going to edit the host file to add this one: "127.0.0.1 csmg.lgmobile.com", so I tried to do it myself manually, I added that line in the host file and it worked! But, (yeah, there's still a but), when I got to the end of everything, just when it went off to install the update, the program told me that the battery level of my phone was too low and that I must charge it first I had 43% of battery left. Haha, but yeah, at least it's working, I'm going to give it a shot after the phone is done charging, wish me luck!
Click to expand...
Click to collapse
Glad to see you got that fixed Let us know how it gets on after flashing.
It all went alright but then at 6% the phone turned on itself to the lockscreen and the program asked me to unplug it, remove the battery, put it back on and turn on the phone, I did what the instructions said, I went to Software Update mode by power on pressing vol-, as a result, everything was fine until 80% when it gave me back the same error, so now my phone is kinda of bricked, it just shows a LG logo and then an opened dead android, lol. I'm downloading NVflash, gonna use it for the first time, hopefully everything goes well so I can try the update again.
This is the whole update log:
Code:
13:06:41 : [C:\LGMobileUpgrade] Try to delete folder
13:06:41 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
13:06:41 : Start Date : 2012-12-09 13:06:41
13:06:41 : ---------- QM Testmode ---------
13:06:41 : ***** Check Tool Version *****
13:06:41 : Tool version : 1.5.4.8
13:06:41 : UpgradeDLL version : 1.2.6.7
13:06:41 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
13:06:41 : LGE USB Driver Version :
13:06:41 : Android PDLV Version :
13:06:41 : Android NDLV Version :
13:06:41 : ******************************************
13:06:41 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
13:06:41 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
13:06:42 : SetEmerModeAT()
13:06:42 : _IsConnectedPhone Call
13:06:50 : _IsConnectedPhone(1)
13:06:50 : 0 - NotConnected.
13:06:50 : 1 - Normal connect success
13:06:50 : 2 - Emergency connect success
13:06:50 : *****CheckOS Start********
13:06:50 : Microsoft_Windows7_Home Edition_Service Pack 1
13:06:50 : *****CheckPCSyncPrograms Start*****
13:06:50 : PCSyncPrograms Not Found - OK and ready to upgrade
13:06:50 : Checking the connection with the cell phone...
13:06:50 : dwWaitResetTime(40000 ms)
13:06:51 : Phone Mode(1)
13:06:51 : *****GetPhoneType Start*****
13:06:51 : Phone Type : IFX_NVIDIA
13:06:51 : *****GetPhoneModel Start*****
13:06:52 : Phone read Model : LG-P990
13:06:52 : Server param Model :
13:06:52 : *****GetPhoneBinaryVersion Start*****
13:06:53 : Phone Bin Version : V28G_EUR_XX_00
13:06:53 : *****Get ESN / IMEI / MEID Start*****
13:06:56 : ESN/IMEI/MEID : XXXXXXXXXXXXXXX
13:06:57 : Phone type Compare start
13:06:57 : *****Start _GetBatteryLevel*****
13:06:57 : Battery(5)
13:06:59 : *****CheckPCSyncPrograms Start*****
13:07:00 : PCSyncPrograms Not Found - OK and ready to upgrade
13:07:01 : ****************CheckAndDownload********************
13:07:01 : ******Extract Start C:\Users\Frikou\Desktop\V30A_00.kdz*****
13:07:01 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
13:07:01 : File Size = 730952417
13:08:48 : Extract kdz file Success.
13:09:00 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V30A.wdb\n
13:09:00 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\V30A.wdb)
13:09:00 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\P990.dll\n
13:09:00 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\P990.dll)
13:09:00 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\V30A.wdb)
13:09:00 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\P990.dll)
13:09:00 : Extract End C:\Users\Frikou\Desktop\V30A_00.cab
13:09:01 : ------------------Model.dll Information-------------------
13:09:01 : Filename : P990.dll
13:09:01 : Version : 0.0.0.5
13:09:01 : File size : 434176
13:09:01 : File date : 2012/10/19-14:18:36
13:09:01 : PC Created date: 2012/12/09-13:09:00
13:09:01 : ----------------------------------------------------------
13:09:01 : Connection check start........
13:09:09 : Check phone IMEI/ESN/MEID again.
13:09:09 : *****2nd ESN / IMEI / MEID check Start*****
13:09:12 : 2nd ESN/IMEI/MEID check : XXXXXXXXXXXXXXX
13:09:12 : IMEI check OK.
13:09:12 : Connection check and IMEI check OK....
13:09:12 : *****Check LGCM Programs Start*****
13:09:12 : LGCM Programs Not Found - OK and ready to upgrade
13:09:13 : *****WorkModelDLL Start*****
13:09:17 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V30A.wdb)
13:09:17 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
13:09:17 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\P990.dll)
13:09:17 : _DetachDLL Call
13:09:17 : _DetachDLL Call End
13:09:17 : Call fn_StartUpgrade
13:09:17 : ********* 2Chip Model.dll input Parameter*************
13:09:17 : MODEL_EVENT : 32769
13:09:17 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V30A.wdb
13:09:17 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
13:09:18 : BootWaitTime : 49500
13:09:18 : UsbHighSpeed : FALSE
13:09:18 : PhoneMode : 1
13:09:18 : NewPhoneBinVersion : V30A_00
13:09:18 : ClearSI : FALSE
13:09:18 : AuthMark : 0
13:09:18 : ********* 2Chip Model.dll input Parameter End*************
13:09:18 : wParam : 2004, lParam = 5
13:09:18 : Step : TYPE_WPARAM_IFX_DN_POS
13:09:33 : wParam : 2004, lParam = 6
13:13:43 : wParam : 2004, lParam = 7
13:13:43 : wParam : 2010, lParam = 3000
13:13:43 : CleanModelDll() : Free Model.dll
13:13:43 : _DetachDLL Call
13:13:43 : _DetachDLL Call End
13:13:43 : Page_Error ºÎºÐÀÔ´Ï´Ù
13:13:43 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
13:16:16 : Call Retry Thread
13:16:16 : Checking the connection with the cell phone...
13:16:16 : Checking the connection with the cell phone...
13:16:17 : dwWaitResetTime(40000 ms)
13:16:21 : _IsConnectedPhone Call
13:16:52 : _IsConnectedPhone(2)
13:16:52 : 0 - NotConnected.
13:16:52 : 1 - Normal connect success
13:16:52 : 2 - Emergency connect success
13:16:52 : Phone Mode(2)
13:16:52 : *****WorkModelDLL Start*****
13:16:52 : _DetachDLL Call
13:16:52 : _DetachDLL Call End
13:16:52 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V30A.wdb)
13:16:52 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
13:16:52 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\P990.dll)
13:16:52 : _DetachDLL Call
13:16:52 : _DetachDLL Call End
13:16:52 : Call fn_StartUpgrade
13:16:52 : ********* 2Chip Model.dll input Parameter*************
13:16:52 : MODEL_EVENT : 32769
13:16:52 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V30A.wdb
13:16:52 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
13:16:52 : BootWaitTime : 74250
13:16:52 : UsbHighSpeed : FALSE
13:16:52 : PhoneMode : 2
13:16:52 : NewPhoneBinVersion : V30A_00
13:16:52 : ClearSI : FALSE
13:16:52 : AuthMark : 0
13:16:52 : ********* 2Chip Model.dll input Parameter End*************
13:16:57 : wParam : 2004, lParam = 7
13:16:57 : Step : TYPE_WPARAM_IFX_DN_POS
13:16:57 : wParam : 2007, lParam = 0
13:16:57 : Step : TYPE_WPARAM_READ_FILES
13:16:57 : wParam : 2004, lParam = 8
13:16:57 : Step : TYPE_WPARAM_IFX_DN_POS
13:16:57 : wParam : 2004, lParam = 9
13:16:58 : wParam : 2004, lParam = 10
13:17:00 : wParam : 2004, lParam = 11
13:17:00 : wParam : 1007, lParam = 1
13:17:00 : Model Dll Msg Not Found(1007, 1)
13:17:05 : wParam : 2004, lParam = 12
13:17:05 : wParam : 1007, lParam = 2
13:17:05 : Model Dll Msg Not Found(1007, 2)
13:17:05 : wParam : 2004, lParam = 12
13:17:25 : wParam : 2004, lParam = 13
13:17:25 : wParam : 2004, lParam = 14
13:17:26 : wParam : 2004, lParam = 15
13:17:26 : wParam : 2009, lParam = 1
13:17:26 : Step : TYPE_WPARAM_CURRENT_FILE
13:17:26 : wParam : 2004, lParam = 15
13:17:26 : Step : TYPE_WPARAM_IFX_DN_POS
13:17:28 : wParam : 2004, lParam = 16
13:17:28 : wParam : 2009, lParam = 2
13:17:28 : Step : TYPE_WPARAM_CURRENT_FILE
13:17:28 : wParam : 2004, lParam = 16
13:17:28 : Step : TYPE_WPARAM_IFX_DN_POS
13:17:30 : wParam : 2004, lParam = 17
13:17:31 : wParam : 2004, lParam = 18
13:17:33 : wParam : 2009, lParam = 4
13:17:33 : Step : TYPE_WPARAM_CURRENT_FILE
13:17:34 : wParam : 2004, lParam = 19
13:17:34 : Step : TYPE_WPARAM_IFX_DN_POS
13:17:36 : wParam : 2004, lParam = 20
13:17:38 : wParam : 2004, lParam = 21
13:17:39 : wParam : 2004, lParam = 22
13:17:40 : wParam : 2004, lParam = 23
13:17:41 : wParam : 2009, lParam = 3
13:17:41 : Step : TYPE_WPARAM_CURRENT_FILE
13:17:42 : wParam : 2004, lParam = 24
13:17:42 : Step : TYPE_WPARAM_IFX_DN_POS
13:17:50 : wParam : 2004, lParam = 25
13:17:54 : wParam : 2004, lParam = 26
13:18:01 : wParam : 2004, lParam = 27
13:18:04 : wParam : 2004, lParam = 28
13:18:10 : wParam : 2004, lParam = 29
13:18:16 : wParam : 2004, lParam = 30
13:18:20 : wParam : 2004, lParam = 31
13:18:25 : wParam : 2004, lParam = 32
13:18:32 : wParam : 2004, lParam = 33
13:18:35 : wParam : 2004, lParam = 34
13:18:42 : wParam : 2004, lParam = 35
13:18:45 : wParam : 2004, lParam = 36
13:18:51 : wParam : 2004, lParam = 37
13:18:56 : wParam : 2004, lParam = 38
13:19:01 : wParam : 2004, lParam = 39
13:19:06 : wParam : 2004, lParam = 40
13:19:13 : wParam : 2004, lParam = 41
13:19:16 : wParam : 2004, lParam = 42
13:19:22 : wParam : 2004, lParam = 43
13:19:25 : wParam : 2004, lParam = 44
13:19:32 : wParam : 2004, lParam = 45
13:19:37 : wParam : 2004, lParam = 46
13:19:43 : wParam : 2004, lParam = 47
13:19:47 : wParam : 2004, lParam = 48
13:19:52 : wParam : 2004, lParam = 49
13:19:56 : wParam : 2004, lParam = 50
13:20:14 : wParam : 2005, lParam = 52
13:20:15 : Step : TYPE_WPARAM_NVIDIA_DN_POS
13:20:18 : wParam : 2005, lParam = 53
13:20:37 : wParam : 2005, lParam = 54
13:20:40 : wParam : 2005, lParam = 55
13:20:43 : wParam : 2005, lParam = 56
13:20:46 : wParam : 2005, lParam = 57
13:20:54 : wParam : 2005, lParam = 58
13:20:57 : wParam : 2005, lParam = 59
13:21:00 : wParam : 2005, lParam = 60
13:21:02 : wParam : 2005, lParam = 61
13:21:06 : wParam : 2005, lParam = 62
13:21:08 : wParam : 2005, lParam = 63
13:21:11 : wParam : 2005, lParam = 64
13:21:14 : wParam : 2005, lParam = 65
13:21:17 : wParam : 2005, lParam = 66
13:21:26 : wParam : 2005, lParam = 67
13:21:29 : wParam : 2005, lParam = 68
13:21:32 : wParam : 2005, lParam = 69
13:21:35 : wParam : 2005, lParam = 70
13:21:38 : wParam : 2005, lParam = 71
13:21:41 : wParam : 2005, lParam = 72
13:21:44 : wParam : 2005, lParam = 73
13:21:47 : wParam : 2005, lParam = 74
13:21:50 : wParam : 2005, lParam = 75
13:21:58 : wParam : 2005, lParam = 76
13:22:01 : wParam : 2005, lParam = 77
13:22:04 : wParam : 2005, lParam = 78
13:22:07 : wParam : 2005, lParam = 79
13:22:10 : wParam : 2005, lParam = 80
13:22:30 : wParam : 2010, lParam = 3013
13:22:30 : CleanModelDll() : Free Model.dll
13:22:30 : _DetachDLL Call
13:22:30 : _DetachDLL Call End
13:22:30 : Page_Error ºÎºÐÀÔ´Ï´Ù
13:22:30 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
13:22:47 : Call Retry Thread
13:22:47 : Checking the connection with the cell phone...
13:22:47 : Checking the connection with the cell phone...
13:22:47 : dwWaitResetTime(40000 ms)
13:22:51 : _IsConnectedPhone Call
13:23:10 : _IsConnectedPhone(1)
13:23:10 : 0 - NotConnected.
13:23:10 : 1 - Normal connect success
13:23:10 : 2 - Emergency connect success
13:23:10 : Phone Mode(1)
13:23:10 : *****WorkModelDLL Start*****
13:23:10 : _DetachDLL Call
13:23:10 : _DetachDLL Call End
13:23:10 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V30A.wdb)
13:23:10 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
13:23:10 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\P990.dll)
13:23:10 : _DetachDLL Call
13:23:10 : _DetachDLL Call End
13:23:10 : Call fn_StartUpgrade
13:23:10 : ********* 2Chip Model.dll input Parameter*************
13:23:10 : MODEL_EVENT : 32769
13:23:10 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V30A.wdb
13:23:10 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
13:23:10 : BootWaitTime : 111375
13:23:10 : UsbHighSpeed : FALSE
13:23:10 : PhoneMode : 1
13:23:10 : NewPhoneBinVersion : V30A_00
13:23:10 : ClearSI : FALSE
13:23:10 : AuthMark : 0
13:23:10 : ********* 2Chip Model.dll input Parameter End*************
13:23:10 : wParam : 2004, lParam = 5
13:23:10 : Step : TYPE_WPARAM_IFX_DN_POS
13:23:10 : wParam : 2004, lParam = 6
13:23:15 : wParam : 2004, lParam = 7
13:23:15 : wParam : 2007, lParam = 0
13:23:15 : Step : TYPE_WPARAM_READ_FILES
13:23:15 : wParam : 2004, lParam = 8
13:23:15 : Step : TYPE_WPARAM_IFX_DN_POS
13:23:15 : wParam : 2004, lParam = 9
13:23:16 : wParam : 2004, lParam = 10
13:23:18 : wParam : 2004, lParam = 11
13:23:38 : wParam : 2010, lParam = 3009
13:23:38 : CleanModelDll() : Free Model.dll
13:23:38 : _DetachDLL Call
13:23:38 : _DetachDLL Call End
13:23:38 : Page_Error ºÎºÐÀÔ´Ï´Ù
13:23:38 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
13:24:33 : Call Retry Thread
13:24:33 : Checking the connection with the cell phone...
13:24:33 : Checking the connection with the cell phone...
13:24:33 : dwWaitResetTime(40000 ms)
13:24:37 : _IsConnectedPhone Call
13:24:37 : _IsConnectedPhone(0)
13:24:37 : 0 - NotConnected.
13:24:37 : 1 - Normal connect success
13:24:37 : 2 - Emergency connect success
13:24:41 : _IsConnectedPhone Call
13:24:41 : _IsConnectedPhone(0)
13:24:41 : 0 - NotConnected.
13:24:41 : 1 - Normal connect success
13:24:41 : 2 - Emergency connect success
13:24:45 : _IsConnectedPhone Call
13:24:45 : _IsConnectedPhone(0)
13:24:45 : 0 - NotConnected.
13:24:45 : 1 - Normal connect success
13:24:45 : 2 - Emergency connect success
13:24:45 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button.
13:25:36 : _IsConnectedPhone Call
13:25:59 : _IsConnectedPhone(0)
13:25:59 : 0 - NotConnected.
13:25:59 : 1 - Normal connect success
13:25:59 : 2 - Emergency connect success
13:25:59 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button.
13:27:43 : _IsConnectedPhone Call
13:27:50 : _IsConnectedPhone(0)
13:27:50 : 0 - NotConnected.
13:27:50 : 1 - Normal connect success
13:27:50 : 2 - Emergency connect success
13:27:50 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button.
13:28:23 : _IsConnectedPhone Call
13:28:30 : _IsConnectedPhone(0)
13:28:30 : 0 - NotConnected.
13:28:30 : 1 - Normal connect success
13:28:30 : 2 - Emergency connect success
13:28:30 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button.
13:28:50 : _IsConnectedPhone Call
13:28:57 : _IsConnectedPhone(0)
13:28:57 : 0 - NotConnected.
13:28:57 : 1 - Normal connect success
13:28:57 : 2 - Emergency connect success
13:28:57 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button.
13:29:37 : _IsConnectedPhone Call
13:29:45 : _IsConnectedPhone(0)
13:29:45 : 0 - NotConnected.
13:29:45 : 1 - Normal connect success
13:29:45 : 2 - Emergency connect success
13:29:45 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button.
13:44:35 : _IsConnectedPhone Call
13:44:35 : _IsConnectedPhone(0)
13:44:35 : 0 - NotConnected.
13:44:35 : 1 - Normal connect success
13:44:35 : 2 - Emergency connect success
13:44:35 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button.
13:44:42 : _IsConnectedPhone Call
13:44:42 : _IsConnectedPhone(0)
13:44:42 : 0 - NotConnected.
13:44:42 : 1 - Normal connect success
13:44:42 : 2 - Emergency connect success
13:44:42 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button.
13:45:15 : Check Cancel button active..
13:45:15 : CLGMobileHttp Class ¼Ò¸ê½ÃÀÛ.
13:45:15 : CLGMobileHttp Class ¼Ò¸ê...
13:45:16 : Page_Error ºÎºÐÀÔ´Ï´Ù
13:45:16 : [011,700,147,062,092]LG Mobile Phone Software Update was canceled\n\n[009,400,102,102,102]To quit LG Mobile Phone Software Update, please press the [009,700,147,062,092]Exit[009,400,102,102,102] button below.
frikou said:
It all went alright but then at 6% the phone turned on itself to the lockscreen and the program asked me to unplug it, remove the battery, put it back on and turn on the phone, I did what the instructions said, I went to Software Update mode by power on pressing vol-, as a result, everything was fine until 80% when it gave me back the same error, so now my phone is kinda of bricked, it just shows a LG logo and then an opened dead android, lol. I'm downloading NVflash, gonna use it for the first time, hopefully everything goes well so I can try the update again.
Click to expand...
Click to collapse
...How did you manage to choose option 3 or option 2 instead of option 6 (LG Update Tool) when I clearly stated option 6?
4. Run the LG Update Tool through "P990-Toolkit.cmd" (located where you extracted all-in-one tool) - option 6.
Click to expand...
Click to collapse
Either way, you just tried to install NVFlash on your phone and failed (option 2/3), instead of updating to ICS. I have no idea what to do to fix that, so you're on your own for now if what you are trying doesn't work.
EDIT: Ok, now I'm really confused. If you got that log you did choose option 6, but it should not and will not ask you to take out the battery and hold down the recovery buttons. You either clicked another option aswell or...i dont know what else.
m1cr0man said:
...How did you manage to choose option 3 or option 2 instead of option 6 (LG Update Tool) when I clearly stated option 6?
Either way, you just tried to install NVFlash on your phone and failed (option 2/3), instead of updating to ICS. I have no idea what to do to fix that, so you're on your own for now if what you are trying doesn't work.
Click to expand...
Click to collapse
I chose option 6, of course, I clearly remember that, option 6, then it told me some advices and told me to click any key to continue so I did.
Why do you mean I tried to install NVflash on my phone? I have followed every indication step by step.
What I said is that I'm downloading NVflash now to unblick my phone and try the update to ICS again using the Toolkit.
I really appreciate all the help people here have gave me, thank you.
m1cr0man said:
EDIT: Ok, now I'm really confused. If you got that log you did choose option 6, but it should not and will not ask you to take out the battery and hold down the recovery buttons. You either clicked another option aswell or...i dont know what else.
Click to expand...
Click to collapse
Man, I was scared a little when you said that you had no idea how to fix that, I thought my phone was dead for good, now I can breathe again.
The vol- down stuff was an instruction from the Office Word document that opened to guide through the update, it says: "10. Wait until it finishes. If it gives any message that the phone is not connected or something like that, disconnect it, turn it off, remove battery and plug it back holding "Volume Down" key. (Automatically goes to Upgrade mode)."
frikou said:
I chose option 6, of course, I clearly remember that, option 6, then it told me some advices and told me to click any key to continue so I did.
Why do you mean I tried to install NVflash on my phone? I have followed every indication step by step.
What I said is that I'm downloading NVflash now to unblick my phone and try the update to ICS again using the Toolkit.
I really appreciate all the help people here have gave me, thank you.
Click to expand...
Click to collapse
Hmm ok. My point is that it should not have asked you to do the unplug and software update mode stuff - I only got that when I was rooting it. Either way, sorry it bricked. It should not have done that.
EDIT: OOOH RIIIITE. Step 10 . I didn't have to do that - no message to say it wasn't connected. Hmm, it might be associated with the fact that I set the screen lock delay to 30 mins before hand. Try that when you are doing it again. I'll include it in the instructions post also.
It looks like even that it didn't go to 100% I'm on the new partition layout because my phone shows a Red LG Logo and the nvflash kit tool didn't rescue it, I'm downloading the Tool Kit for ICS to try it out, 30 more minutes before the download finishes.
Edit: Alright, using this NVflash toolkit for ICS I went back to old partition layout and flashed my old Rom, I'm so happy, my phone is alive again. Alright, now I'm going to set the 30min lock time and try to update to ICS again
Edit 2: I tried updating again, the same thing happened, had to use NVflash to restore my phone again, I'm gonna try to update another day using a different pc, maybe it will work, thanks a lot m1cr0man, i really appreciate all your help.
m1cr0man said:
Alright then...I got my O2X updated and it was not easy. I'll try and provide the best steps I can. THIS IS NOT A CUSTOM FIRMWARE. I thought it was too, until I saw the LG R&D tool at the end of all this...
UPDATED INSTRUCTIONS - If you are in the process of doing this, check the new step 4
1. Get the All-In-One tool and extract it somewhere.
-I suggest doing a backup if you haven't already. Run this tool to do so - it has a program that will compress your internal/external sd for you.
+I used MyBackup (on market) to backup and restore all my data.
2. Download: V30A from here
3. Make sure there is at least 1 free line at the end of your hosts file (GIYF if you don't know what it is).
4. Set the lock delay/screen timeout on the phone to 30 minutes and make sure it isn't in USB mass storage mode. Stops the driver failing
5. Run the LG Update Tool through "P990-Toolkit.cmd" (located where you extracted all-in-one tool) - option 6.
-If it fails when you press "Normal web upgrade test" in the R&D tool - either your hosts file is wrong or the apache server didnt set itself up right.
+Make sure you added that free line in your hosts file. Otherwise, fix the details the program added (will be at end of last non-free line)
+I don't know what you can do in the second case other than setup your own apache server which is what I did (I had one).
-If it fails at around 6% with a device not connected error, DO NOT DO STEP 10 IN THE DOCUMENT. Very high chance of bricking.
+Make sure you set the lock delay/screen timeout to 30 mins and that the phone isn't in mass storage mode.
6. Wait about 10-15 mins. Don't worry - it does take a while to reboot afterwards.
7. On my behalf, enjoy the update and dont complain about it the second you see lag or something else ridiculous like that.
-If you do have a problem, search the forum. Like the intro video says, your probably not special
Proof that it works:
-M1cr0man
Click to expand...
Click to collapse
Thank you very much
I am from Portugal and it worked like a charm

[Q] Can't root with carrier

Hi,
I have tried to root my lg optimus 4x hd phone by following all the instructions I found on xda and elsewhere.
My cell phone carrier is Videotron (canada). I have removed the antivirus app and couldn't see any trace of a screen control app.
The problem appears when I try to launch the system backup test app, it get an error message (it won't launch).
Any help appreciated please,
Thanks
which firmware version do you have ?
try this: http://forum.xda-developers.com/showthread.php?t=1886460
firmware version
Hi tobixdev,
Here is all the info about my phone (firmware/software):
LG-P880g
Android 4.0.3
kernel: 2.6.39.4-00002-g99c972b
build: IML74k
Version: LG-P880g-V10b-sep-05-2012
So I guess the answer to your question is V10b...
Meanwhile, I will try with the link you provided
Thanks for your help!
AW: [Q] Can't root with carrier
Are you brasilian or canadian ?
Sent from my LG-P880 using xda app-developers app
Canadian
Sent from my LG-P880g using xda app-developers app
enriqueriv said:
Canadian
Sent from my LG-P880g using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=37268564&postcount=12
Error message - kdz upgrade
tobixdev said:
http://forum.xda-developers.com/showpost.php?p=37268564&postcount=12
Click to expand...
Click to collapse
Hi tobixdev,
I followed your suggested method, and I get this error message when doing the kdz upgrade: error code 5001
What am I doing wrong? Using the wrong kdz or version file? Is it V10b or V10c for Videotron (Canada).
Here is the log file:
[R&D Test Tools Log File]
12:30:30 : Launching SW update
12:30:30 : Unpacking KDZ
12:30:42 : KDZ file extraced
12:30:43 : Files were extracted.
12:30:43 : LGMobileDL Load.
12:30:43 : Port = -1
12:30:43 : Connecting to phone
12:30:56 : Check Phone mode = 2
12:30:56 : Phone type check.......
12:30:58 : LGMobileDL.DLL Loading....
12:30:58 : _SetAuthMark Fail
12:30:58 : _SetAuthMark Ok : wAuthMark(65535)
12:30:58 : _DetachDLL Call
12:30:58 : _DetachDLL Call End
12:30:58 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP500AT-00-V10c-ESA-XX-OCT-19-2010+0-DZ.dz
12:30:58 : Param : moduleDir =
12:30:58 : Param : waitTime = 0
12:30:58 : Param : UsbHighSpeed = 1
12:30:58 : Param : PhoneMode = 2
12:30:58 : Param : BinVersion = V10C_00
12:30:58 : Param : AuthMark = 65535
12:30:58 : Call fn_StartUpgrade
12:31:05 : 3GQCT : wParam = 100, lParam = 5001
12:31:05 : Step : Upgrade Error error code = 5001
12:31:05 : ResetStartInfo() Call
12:31:05 : _DetachDLL Call
12:31:05 : _DetachDLL Call End
12:31:06 : FreeLibrary Call
12:31:06 : FreeLibrary Call End
12:31:06 : ResetStartInfo() Call End
12:31:06 : ===FINISHED===
Thanks again for help and swift response!
enriqueriv said:
Hi tobixdev,
I followed your suggested method, and I get this error message when doing the kdz upgrade: error code 5001
What am I doing wrong? Using the wrong kdz or version file? Is it V10b or V10c for Videotron (Canada).
Here is the log file:
[R&D Test Tools Log File]
12:30:30 : Launching SW update
12:30:30 : Unpacking KDZ
12:30:42 : KDZ file extraced
12:30:43 : Files were extracted.
12:30:43 : LGMobileDL Load.
12:30:43 : Port = -1
12:30:43 : Connecting to phone
12:30:56 : Check Phone mode = 2
12:30:56 : Phone type check.......
12:30:58 : LGMobileDL.DLL Loading....
12:30:58 : _SetAuthMark Fail
12:30:58 : _SetAuthMark Ok : wAuthMark(65535)
12:30:58 : _DetachDLL Call
12:30:58 : _DetachDLL Call End
12:30:58 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP500AT-00-V10c-ESA-XX-OCT-19-2010+0-DZ.dz
12:30:58 : Param : moduleDir =
12:30:58 : Param : waitTime = 0
12:30:58 : Param : UsbHighSpeed = 1
12:30:58 : Param : PhoneMode = 2
12:30:58 : Param : BinVersion = V10C_00
12:30:58 : Param : AuthMark = 65535
12:30:58 : Call fn_StartUpgrade
12:31:05 : 3GQCT : wParam = 100, lParam = 5001
12:31:05 : Step : Upgrade Error error code = 5001
12:31:05 : ResetStartInfo() Call
12:31:05 : _DetachDLL Call
12:31:05 : _DetachDLL Call End
12:31:06 : FreeLibrary Call
12:31:06 : FreeLibrary Call End
12:31:06 : ResetStartInfo() Call End
12:31:06 : ===FINISHED===
Thanks again for help and swift response!
Click to expand...
Click to collapse
I will upload my version of the update.
It worked for me every time.
.kdz file you need by your own as it would be to big.
1 way
Run automatic offline procedur.
In the right bottom there must be now the windows enabler symbol. click on it. now there should be the letters " ON "
UpTestEX_mod2_marwin run this as admin
select emergency instead of DIAG
select your kdz ( the v10h in the zip is just a link to a local one on my external hdd. I forgot to erase it)
press on start upgrade.
2 if 1 doesnt work
unplug your phone
exit windows enabler and https server
start windows enabler and https server with admin rights
In the right bottom there must be now the windows enabler symbol. click on it. now there should be the letters " ON "
UpTestEX_mod2_marwin run this as admin
select emergency instead of DIAG
select your kdz ( the v10h in the zip is just a link to a local one on my external hdd. I forgot to erase it)
press on start upgrade.
i hope this works. good luck:good:
Thanks, I will give this a try...

[Solved] [Q] (All flash methods fail) Unable to Reflash LG Thrill

I have the ghost call bug on LG Thrill ICS, and I read flashing back to froyo will fix it. That would be great if I could flash back to froyo. I found out I am no longer able to flash my phone with LG Flash Tools (in the LG Update Package), the official up to date LG Mobile Update program, and with the LG Flash tool (which flashes .bin and .fls files).
The symptoms of not working are:
Lg Flash Tools: The updater fails on 5% because of Page_Error ºÎºÐÀÔ´Ï´Ù.
I suspect this doesn't work because I have a custom bootloader from the All-In-One Package that shows the Silver LG Fastboot Logo instead of the standard red logo. I have already tried using the recover update trick used to solve the page error I read in a different post. This leads into the next symptom.
LG Mobile Update: This freezes on 4% and has no log of why it won't work. I can only perform the recover phone mode as the tool now recognizes I have updated the phone (which it only recognized that it is up to date after I flashed the custom bootloader).
LG Flash Tool: This tool as the others used to flash but it now just counts the time and doesn't increase the flash percentage at all. I have tried both the P920 and the P925 dll and they both have the same result.
The flashing methods described above don't make any visible changes to my phone (or any changes at all). I have tried wiping the x-loader and the u-boot via fastboot to find I can't boot into s/w mode without reflashing those back. I have not tried wiping the whole phone because I am tired of bricking my phone over and over and I don't have the files in fastboot ready format to flash back anyway. I couldn't figure out how to back up my whole phone via fastboot (and I can't go around this problem for the baseband because their is no radio partition).
I have Googled and messed with my phone a week and since I am desperate to fix this ghost call bug I decided to not wait any longer before asking for help. Can someone please help me fix my flashing problem so I can go to froyo to fix the ghost call bug. I have froyo in kdz format and in .bin/.fls formats (baseband and .bin). I used both the s/w and the lg software option of starting an update for flashing. I remembered I forgot to tell you I also tried resetting the tools on the computer and followed the instructions to the letter to get rid of any configuration problems that may have occurred.
I will press the thanks button for the first of those who help me solve my dilemma, even if I have to pull the solution from multiple answerers.
Bonus: As an extra bonus, what can I do to write directly to and read directly from the phone's flash chip so when I get my upgrade in March, I can retire my phone to OS development.
The log from the LG Flash Tools is:
15:58:00 : [C:\LGMobileUpgrade] Try to delete folder
15:58:00 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
15:58:00 : Start Date : 2013-11-11 15:58:00
15:58:00 : ---------- QM Testmode ---------
15:58:00 : ***** Check Tool Version *****
15:58:00 : Tool version : 1.5.4.8
15:58:00 : UpgradeDLL version : 1.2.6.7
15:58:00 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
15:58:00 : LGE USB Driver Version :
15:58:00 : Android PDLV Version :
15:58:00 : Android NDLV Version :
15:58:00 : ******************************************
15:58:00 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
15:58:00 : SetEmerModeAT()
15:58:00 : _IsConnectedPhone Call
15:58:22 : _IsConnectedPhone(2)
15:58:22 : 0 - NotConnected.
15:58:22 : 1 - Normal connect success
15:58:22 : 2 - Emergency connect success
15:58:22 : *****CheckOS Start********
15:58:22 : Microsoft_Windows_XP_Home Edition_Service Pack 3
15:58:22 : *****CheckPCSyncPrograms Start*****
15:58:22 : PCSyncPrograms Not Found - OK and ready to upgrade
15:58:22 : Checking the connection with the cell phone...
15:58:22 : dwWaitResetTime(40000 ms)
15:58:23 : Phone Mode(2)
15:58:23 : *****GetPhoneType Start*****
15:58:23 : Phone Type : OMAP_IFX
15:58:23 : *****GetPhoneBinaryVersion Start*****
15:58:23 : *****Get ESN / IMEI / MEID Start*****
15:58:23 : ESN/IMEI/MEID : -----------------------------
15:58:23 : Phone type Compare start
15:58:23 : *****CheckPCSyncPrograms Start*****
15:58:24 : PCSyncPrograms Not Found - OK and ready to upgrade
15:58:25 : ****************CheckAndDownload********************
15:58:25 : ******Extract Start C:\Users\Brandon Gomez\Desktop\Downloads\V21E_00.kdz*****
15:58:25 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
15:58:25 : File Size = 186843008
15:58:27 : Extract kdz file Success.
15:58:28 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V21E.wdb\n
15:58:28 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\V21E.wdb)
15:58:28 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\Star_Model.dll\n
15:58:28 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\Star_Model.dll)
15:58:28 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\V21E.wdb)
15:58:28 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\Star_Model.dll)
15:58:28 : Extract End C:\Users\Brandon Gomez\Desktop\Downloads\V21E_00.cab
15:58:28 : ------------------Model.dll Information-------------------
15:58:28 : Filename : Star_Model.dll
15:58:28 : Version : 1.0.0.1
15:58:28 : File size : 307200
15:58:28 : File date : 2011/02/28-20:17:28
15:58:28 : PC Created date: 2013/11/11-15:58:28
15:58:28 : ----------------------------------------------------------
15:58:28 : *****Check LGCM Programs Start*****
15:58:28 : LGCM Programs Not Found - OK and ready to upgrade
15:58:28 : *****WorkModelDLL Start*****
15:58:29 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V21E.wdb)
15:58:29 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
15:58:29 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\Star_Model.dll)
15:58:29 : _DetachDLL Call
15:58:29 : _DetachDLL Call End
15:58:30 : Call fn_StartUpgrade
15:58:30 : ********* 2Chip Model.dll input Parameter*************
15:58:30 : MODEL_EVENT : 32769
15:58:30 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V21E.wdb
15:58:30 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
15:58:30 : BootWaitTime : 49500
15:58:30 : UsbHighSpeed : FALSE
15:58:30 : PhoneMode : 2
15:58:30 : NewPhoneBinVersion : V21E_00
15:58:30 : ClearSI : FALSE15:58:48 : wParam : 2007, lParam = 0
15:58:49 : Step : TYPE_WPARAM_READ_FILES
15:58:49 : wParam : 2008, lParam = 8
15:58:49 : Step : TYPE_WPARAM_TOTAL_FILES
15:58:49 : wParam : 2005, lParam = 0
15:58:49 : Step : TYPE_WPARAM_NVIDIA_DN_POS
15:58:49 : wParam : 2003, lParam = 16
15:58:49 : Step : TYPE_WPARAM_DOWNLOAD_FILENAME
15:58:49 : wParam : 2005, lParam = 1
15:58:49 : Step : TYPE_WPARAM_NVIDIA_DN_POS
15:58:49 : wParam : 2009, lParam = 1
15:58:50 : Step : TYPE_WPARAM_CURRENT_FILE
15:58:50 : wParam : 2005, lParam = 5
15:58:50 : Step : TYPE_WPARAM_NVIDIA_DN_POS
15:58:30 : AuthMark : 0
15:58:30 : ********* 2Chip Model.dll input Parameter End*************
15:59:23 : wParam : 2010, lParam = 3015
15:59:23 : CleanModelDll() : Free Model.dll
15:59:23 : _DetachDLL Call
15:59:23 : _DetachDLL Call End
15:59:23 : Page_Error ºÎºÐÀÔ´Ï´Ù
15:59:23 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
15:59:23 : CleanModelDll() : Free Model.dll
15:59:23 : _DetachDLL Call
15:59:23 : _DetachDLL Call End
15:59:23 : Page_Error ºÎºÐÀÔ´Ï´Ù
15:59:23 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
16:00:44 : Call Retry Thread16:01:27 : _IsConnectedPhone(2)
16:01:27 : 0 - NotConnected.
16:01:27 : 1 - Normal connect success
16:01:27 : 2 - Emergency connect success
16:01:27 : Phone Mode(2)
16:01:27 : *****WorkModelDLL Start*****
16:01:28 : _DetachDLL Call
16:01:28 : _DetachDLL Call End
16:01:28 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V21E.wdb)
16:01:28 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
16:01:28 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\Star_Model.dll)
16:01:28 : _DetachDLL Call
16:01:28 : _DetachDLL Call End
16:01:28 : Call fn_StartUpgrade
16:01:28 : ********* 2Chip Model.dll input Parameter*************
16:01:28 : MODEL_EVENT : 32769
16:01:28 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V21E.wdb
16:01:28 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
16:01:28 : BootWaitTime : 74250
16:01:28 : UsbHighSpeed : FALSE
16:01:28 : PhoneMode : 2
16:01:28 : NewPhoneBinVersion : V21E_00
16:01:28 : ClearSI : FALSE
16:01:28 : AuthMark : 0
16:01:28 : ********* 2Chip Model.dll input Parameter End*************
16:01:45 : wParam : 2007, lParam = 0
16:01:45 : Step : TYPE_WPARAM_READ_FILES
16:01:45 : wParam : 2008, lParam = 8
16:01:45 : Step : TYPE_WPARAM_TOTAL_FILES
16:01:45 : wParam : 2005, lParam = 0
16:01:45 : Step : TYPE_WPARAM_NVIDIA_DN_POS
16:01:45 : wParam : 2003, lParam = 16
16:01:45 : Step : TYPE_WPARAM_DOWNLOAD_FILENAME
16:01:45 : wParam : 2005, lParam = 1
16:01:45 : Step : TYPE_WPARAM_NVIDIA_DN_POS
16:01:45 : wParam : 2009, lParam = 1
16:01:45 : Step : TYPE_WPARAM_CURRENT_FILE
16:01:45 : wParam : 2005, lParam = 5
16:01:45 : Step : TYPE_WPARAM_NVIDIA_DN_POS
16:02:18 : wParam : 2010, lParam = 3015
16:02:18 : CleanModelDll() : Free Model.dll
16:02:18 : _DetachDLL Call
16:02:18 : _DetachDLL Call End
16:02:18 : Page_Error ºÎºÐÀÔ´Ï´Ù
16:02:18 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
16:02:18 : CleanModelDll() : Free Model.dll
16:02:18 : _DetachDLL Call
16:02:18 : _DetachDLL Call End
16:02:18 : Page_Error ºÎºÐÀÔ´Ï´Ù
16:02:18 : Page_DeepError()- 8
16:02:18 : [011,700,147,062,092]Problem with communication between cell phone and PC\n\n[009,400,102,102,102]To restart from the beginning, disconnect and connect the USB cable and battery, \nthen power on your cell phone and try according to instructions. This will \nnormally complete update.If not, please visit the LG Service Center.
16:02:18 : *********** End of Page_DeepError() *********
16:03:30 : =======Cancel button click : m_nStep(10)
16:00:44 : Checking the connection with the cell phone...
16:00:44 : Checking the connection with the cell phone...
16:00:44 : dwWaitResetTime(40000 ms)
16:00:48 : _IsConnectedPhone Call
Follow this.
http://forum.xda-developers.com/showthread.php?t=2195753
Forget LG updater, it is no good. The reason LG Flash tool did not work for you is likely due to incorrect driver install.
---------- Post added at 12:21 AM ---------- Previous post was at 12:19 AM ----------
And ghost call bug is from having the wrong .fls (baseband) for your area.
Title Question Solved
drastic00 said:
Follow this.
http://forum.xda-developers.com/showthread.php?t=2195753
Forget LG updater, it is no good. The reason LG Flash tool did not work for you is likely due to incorrect driver install.
---------- Post added at 12:21 AM ---------- Previous post was at 12:19 AM ----------
And ghost call bug is from having the wrong .fls (baseband) for your area.
Click to expand...
Click to collapse
The answer to my part of problem is to plug in the phone after clicking the yellow arrow. Now I just need an expert to tell me what baseband is best for the maximum coverage (the most frequencies), works with AT&T 4G, 3G, etc..., works with the LG Thrill 4G (P925) with the official ICS of version v30b. and is made for America. I currently flashed the baseband from http://d-h.st/dxl to see how well it works over the next day to the next few days. It currently displays one bar as it always did and appears to have the same version as what I had before, but I don't know if the baseband version name is hard coded into the stock rom.
The baseband I tried is not the correct one
Brandon Gomez said:
The answer to my part of problem is to plug in the phone after clicking the yellow arrow. Now I just need an expert to tell me what baseband is best for the maximum coverage (the most frequencies), works with AT&T 4G, 3G, etc..., works with the LG Thrill 4G (P925) with the official ICS of version v30b. and is made for America. I currently flashed the baseband from http://d-h.st/dxl to see how well it works over the next day to the next few days. It currently displays one bar as it always did and appears to have the same version as what I had before, but I don't know if the baseband version name is hard coded into the stock rom.
Click to expand...
Click to collapse
The baseband I mentioned flashing in this post is not the one I am looking for because I have the ghost call problems again. I have created a list of basebands not to use for this purpose and (hopefully) later on I will specify which one does work.
Basebands to not use:
http://d-h.st/dxl
Basebands to use:
Unknown
What is the baseband for:
Frequencies | Carrier | Networks (4G, 3G, Edge, etc...), Phone | Phone Model Number | Android Type (ICS, Jellybean, Gingerbread), Android Version (v30b) | Baseband Version | Country Made For (or at least where it works well)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
? | AT&T | 4G, 3G, Edge, Cell | LG Thrill | P925 | OMAP4430/XMM6260 | ICS | v30b | ?
I added this chart because this is the kind of data baseband hunters are looking for. I hope someone uses this to create a thread to elaborate on this. Download links are optional on the chart.
Use the baseband included in the rooted v28B download and you should be golden. I do not know what files from other sources will do.
BTW you connect phone and [/I]then press the arrow
---------- Post added at 10:49 PM ---------- Previous post was at 10:45 PM ----------
Never mind, you are correct and I am sleepy Yellow arrow, then connect phone.
The baseband is from the large partition of v28.
drastic00 said:
Use the baseband included in the rooted v28B download and you should be golden. I do not know what files from other sources will do.
BTW you connect phone and [/I]then press the arrow
---------- Post added at 10:49 PM ---------- Previous post was at 10:45 PM ----------
Never mind, you are correct and I am sleepy Yellow arrow, then connect phone.
Click to expand...
Click to collapse
The baseband I used came from the thread you linked, but it appears to be the same baseband I originally had. I used the large partition link so I will try others from the thread.
P925G baseband file is here
http://www.mediafire.com/?dmr7ra90dv3t8t4
It should work ok with v30B. This is the one I use with his v30C ROM...
What to do?
My phone still has ghost call, but maybe it is because of the dead zone the at&t coverage map shows. I know the ghost call exists because I checked the symptoms and my phone wasn't reliable when I was traveling. I am going to test out froyo now that I can flash again, but if that doesn't work, then it is because of the dead zone.
I won't flash froyo tonight because I will need my phone tomorrow, and according to the coverage map I should have hardly any signal even though I have not tested it with another person's phone yet. I will work on it this weekend.
More Edits:
I just flashed the gingerbread from the LG Optimus 3D, as I could only find this and that is because I already had it (I don't remember why). It had the same issues as ICS about the cell signal even though it is a little bit better, so it is probably the area I live in (however it used to work and my phone is the only phone affected).
I tested the phone this weekend and it now picks up signal very well even though it didn't before. It just isn't as powerful as other phones in the same area so if this is a hardware issue, the question is solved, but if this is a software issue, then anyone who knows why it doesn't pick up signal as well and/or can solve this issue please post why or how this happens or to fix it.
I decided to mark this thread as solved even though I determined this as a software issue, since I decided I no longer care as long as I have sufficient signal. By March I can retire this phone to OS development and see if I can bring some new life to it. I expect to see myself making new threads about the structure of the phone drive and kdz making along at xda as well as learning arm processor assembly (with the x86 bit assembly I am currently learning) on osdev.org around that time of year.

Categories

Resources