Case Mate case Official - Focus Accessories

Looks like case mate made official their case for the samsung focus (other than just by the AT&T store: http://www.case-mate.com/Samsung-Focus-Cases/Case-Mate-Samsung-Focus-Pop-Cases.asp
EDIT (on 11-01-2010):
Just received the black version from case-mate. The reason for the case being 30$-ish, it includes a screen protector kit. I can defenitively tell that the black version looks slicker than the red one. But that's a mater of personal taste. I mean it's slicker in a way that it look like it's more *part* of the phone, meaning its less obvious that you have a case on it. Anyway that's my 2 cents

Pretty nice, but 35 bucks??? lol Otterboxes go for that much.

ITDRAGON said:
Pretty nice, but 35 bucks??? lol Otterboxes go for that much.
Click to expand...
Click to collapse
I have the red version (ordered on ebay) and it's really great, not too soft and harder in the back, I don't mind paying that much for a case, when I paid several hundreds for my phone.

I've got a red one on order... What do you think of it? I have seen a video review but it sucks...

jessiethe3rd said:
I've got a red one on order... What do you think of it? I have seen a video review but it sucks...
Click to expand...
Click to collapse
I really like it, it's really great and makes handing the phone better (grip is better).
It does makes the phone a little bit heavier and bulkier, but I mean thats normal it's a case
I can take some shot of it if you want!

35 bucks....

$90 can you say RAPE?
http://cgi.ebay.com/New-Red-Black-C...Accessories&hash=item43a40cab56#ht_3922wt_905

I purchased the red pop case when i bought the phone and it was a nice case. Very sturdy but an extremely tight fit. So tight that when I tried to pry out my phone one day a small platic piece right under the micro usb cutout broke. The phone certainly pops out when you pullllllll it out. Either way iam dissapointed I wasted $35 bucs on that case but very content with my body glove snap case.
On a side note how efffed up is it that otterbox make a case the dell venue, which by the way hasnt had a wide release, and hasnt made one the the focus? Makes no sense...

punkcell said:
$90 can you say RAPE?
http://cgi.ebay.com/New-Red-Black-C...Accessories&hash=item43a40cab56#ht_3922wt_905
Click to expand...
Click to collapse
Wow msrp is 35.. wth lol
http://cgi.ebay.com/Samsung-Focus-Windows-7-i917-POP-Case-Case-Mate-RED-/330502923353?pt=PDA_Accessories&hash=item4cf3826459
This guy is selling them for about 22.00 has 275 of them lol
How do you guys like the way the buttons stick up? Are you hitting them by accident? Does it help in preventing hitting the camera or power button by accident?

I bought the Red case-mate on Cyber Monday when they were 50% off from AT&T site. I couldn't resist taking advantage of this deal and I needed some decent protection for my Focus. Although I kinda like the case, I might get the Otterbox when it comes out . My setup right now is this case with a Zagg InvisibleShield. I use Cat Crap paste lens cleaner to keep the screen clean and slick. Any case you buy is going to be a balance of form, fit, function, and price.
Form - This is a area of taste for most and differs widely between people. In general, I'd say this case provides reasonable protection at a relatively slim design and light weight. It feels good in your hand and is attractive. Not being a big fan of colored cases, the red is actually attractive (can't believe I'm saying that). Had the black one been available at the time, I would have definitely gone with that one. But the red is masculine and I can live with it. Agree with cubanaso about the delicacy of the small plastic strip between microusb port and front of phone (screen). This went under extreme stress when I put the phone in and I thought I was going to break it (most likely because I didn't put it in the best way). Thankfully it flexed but didn't break. My suggestion would be to pay the most attention to this area when installing phone. Because of the shape of the phone, the natural instinct is to put the bottom side in the case first. Might want to try putting the top side in first and flex the bottom instead .
Fit - snug fit and definitely isn't going anywhere. Feels like a part of the phone. I actually removed it to instal microusb card, then put it back it. It is a challenge, but not impossible. Like I stated before, you have to be super sensitive to the case's thin plastic strip near microusb port. Overall fit is excellent if you don't plan on taking it on and off.
Function - I've actually dropped it from about 5 feet and it was fine. No damage to case of phone. I'd say the protection level is above average but not Otterbox Defender level. It is probably comparable to the Otterbox commuter series. Minor scratches to back of phone, but still looks relatively new after a month. As far as the buttons go, the case-mate setup actually works quite well. The protrude just the right amount to where you know where they are without having to look at the phone. I can feel the correct orientation of my phone and upright it without looking at it. Big plus. But they take just enough intentional push to where I have yet to accidentally turn off the phone. Not even once. The execution of the buttons (and the side grip as a whole) is probably the biggest plus of the case-mate Pop! Case. Who knows, if Otterbox takes to long, I just may stick with the Pop! Case. I'm not a huge fan of a Red case (by any manufacturer), but this one is actually a good one and is starting to grow on me.
Price - As of right now, I wouldn't pay retail for this case. There was a time when this was the only decent case imo and it was only offered on AT&T site. This is not the situation anymore. Here is another site where it is discounted:
http://www.mrhit.com/POP_Case_RED_Samsung_Focus_i917_Windows7_Case_Mate_p/mh-22674.htm

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310284312222
Forget $90. Forget $22. How about $10????? Free Shipping too.
Seems like a legit seller.

That's a deal right there.

wildbilll said:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310284312222
Forget $90. Forget $22. How about $10????? Free Shipping too.
Seems like a legit seller.
Click to expand...
Click to collapse
i hope he sells the black ones soon

Got in the $10 red one today by USPS.
Pardon the lousy photos.
What I need now is a leather belt case that will hold it and close fully since it now measures 129mm x 69mm x 15.5mm with this case on it. My original size was 123mm x 65mm x 10mm.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Nice!!! I just got the black one. I love the case

wildbilll said:
Got in the $10 red one today by USPS.
Pardon the lousy photos.
What I need now is a leather belt case that will hold it and close fully since it now measures 129mm x 69mm x 15.5mm with this case on it. My original size was 123mm x 65mm x 10mm.
Click to expand...
Click to collapse
i broke off the thin red strip where the micro usb slot is...this allows you to take the case off and put it back on with ease...case will still retain its tighness on the phone

chizzwhizz said:
i broke off the thin red strip where the micro usb slot is...this allows you to take the case off and put it back on with ease...case will still retain its tighness on the phone
Click to expand...
Click to collapse
In the process of taking a picture of the sd card for another thread here on the focus site under general, I took off the case to get to the memory card.
When I was putting the Case Mate back on, one end of the thin part broke. This is definitely a weak spot in the design.
Did you remove it (the red strip) completely, and if so did you cut away the rubber gasket or leave that?

wildbilll said:
In the process of taking a picture of the sd card for another thread here on the focus site under general, I took off the case to get to the memory card.
When I was putting the Case Mate back on, one end of the thin part broke. This is definitely a weak spot in the design.
Did you remove it (the red strip) completely, and if so did you cut away the rubber gasket or leave that?
Click to expand...
Click to collapse
i left the rubber there. The thin red strip makes it so hard to remove the case but without it, the rubber there can expand for easy removal.

AngelSpirit said:
Looks like case mate made official their case for the samsung focus (other than just by the AT&T store: http://www.case-mate.com/Samsung-Focus-Cases/Case-Mate-Samsung-Focus-Pop-Cases.asp
EDIT (on 11-01-2010):
Just received the black version from case-mate. The reason for the case being 30$-ish, it includes a screen protector kit. I can defenitively tell that the black version looks slicker than the red one. But that's a mater of personal taste. I mean it's slicker in a way that it look like it's more *part* of the phone, meaning its less obvious that you have a case on it. Anyway that's my 2 cents
Click to expand...
Click to collapse
Which shipping option did you choose and how long did it take to get to Canada? Thx.

sabesh said:
Which shipping option did you choose and how long did it take to get to Canada? Thx.
Click to expand...
Click to collapse
just the USPS one (the cheapest), got it within about 5-6 business days (I'm in Montreal)

Related

Updated: AT&T Gel Case, Body Glove Pattern Soft Shell Case

This isn't the case for someone who doesn't want to modify it...
Problem:
The case covers the power, shutter and volume buttons. The case does not allow enough room between the button and case.
Result:
Power button and shutter buttons are pressed under the case and often results in powering off.
Solution:
Different case or Dremel your gel case to open up holes This will make it so your finger has to actually work a tiny amount into the case. Accidental presses are gone for me now.
Mod for yourself if you have the tools:
Dremel with a pointy sanding bit.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thresher said:
This isn't the case for someone who doesn't want to modify it...
Problem:
The case covers the power, shutter and volume buttons. The case does not allow enough room between the button and case.
Result:
Power button and shutter buttons are pressed under the case and often results in powering off.
Solution:
Different case.
More 'tolerance' between the case and button.
Mod for yourself if you have the tools:
Dremel with a pointy sanding bit. Without piercing the case, grind off excess case material to allow for more headroom.
Click to expand...
Click to collapse
Confirmed! Total POS.
I saw the cases at the store and didn't like them. Hopefully some good ones come out.
Agreed! Totally useless. Looks awesome but too tight on my phone and powers it off. Returning mine now. Going to get the silver hard one. Will let you know.
Yeah they almost talked me into it but I was strong. Thanks for the info; glad I didn't get it.
Yeah I made the mistake of buying one of the gel cases... It's HORRIBLE!
I'm going to return it later and buy a amzer case on amazon when I buy my microsd card.
desolateone1 said:
Yeah I made the mistake of buying one of the gel cases... It's HORRIBLE!
I'm going to return it later and buy a amzer case on amazon when I buy my microsd card.
Click to expand...
Click to collapse
I was going to return mine but a different problem popped up and it made me realize this case could help me.
Lots of people are reporting accidental power button and camera button presses. This case makes it worse. Thus my awful review.
I am a bit lazy though and refused to look online or return the gel case.
I had previously taken a dremel to the inside of the gel case to allow for more clearance. Well it helped but I still was hitting the power button accidentally...
So it made me think of other cases I have had, why not just cut out those button holes?
So here it is, the modified gel case and it is awesome. No more accidental presses and no need to return anything or buy anything extra.
Check out the pic...
I picked up the grey incipio shell case. I like it. I only got it because my gf works at the att store so only got it for $10.
Nice job! I got the same case and already took it off
I simply returned mine
I went back and got the casemate red and black one. Muche better buttons that this POS
desolateone1 said:
Yeah I made the mistake of buying one of the gel cases... It's HORRIBLE!
I'm going to return it later and buy a amzer case on amazon when I buy my microsd card.
Click to expand...
Click to collapse
I don't understand why they aren't shipping until 12/1. This whole WP7 venture just gets more ridiculous everyday...
i got the red and black case mate...i love how it makes the phone feel sturdier. Added grip comes in handy and the gain in thickness makes me feel like im using a handheld gaming device when playing games.
chizzwhizz said:
i got the red and black case mate...i love how it makes the phone feel sturdier. Added grip comes in handy and the gain in thickness makes me feel like im using a handheld gaming device when playing games.
Click to expand...
Click to collapse
I had one of those cases and although it was nice, try getting your phone out of it. You almost have to cut the damn thing out.
Weird. I must be the only one who has the case on my phone and it works perfectly. I must be lucky and got one of the Body Glove cases that was made right.
Never had a problem with any of the buttons and I use my phone a lot. I guess if it starts giving me problems, I will have to modify it.
I have the Case Mate Pop, and its an awesome case. Its built like a tank and will have no worries about dropping the phone knowing my phone is well protected. Highly recommended. The Incipio feather case, does not protect it all if you dropped it on its top or bottom, because those areas are not protected it will break or severely scratched up. The Body glove Mirage case is an odd case because you need to mod it, unlike the case for the Captivate. This one does not have the cut outs for the buttons.
Thresher said:
...
So here it is, the modified gel case and it is awesome. No more accidental presses and no need to return anything or buy anything extra.
Check out the pic...
Click to expand...
Click to collapse
whoever is very good on handling with care a dremel, you probably want to just "sand/reduce some of the interal space around the buttons, without creating a whole.
I am not that good, but I was able to do the internal "reduction" in the power button and it works... I messed with the Camera Shutter (My reduction ends in a whole for the shooter). You may like to try reduction first, as te external look of the cover remains.
jbedoya said:
whoever is very good on handling with care a dremel, you probably want to just "sand/reduce some of the interal space around the buttons, without creating a whole.
I am not that good, but I was able to do the internal "reduction" in the power button and it works... I messed with the Camera Shutter (My reduction ends in a whole for the shooter). You may like to try reduction first, as te external look of the cover remains.
Click to expand...
Click to collapse
Would an xacto knife work?
For cutting the hole, yes; but, for reducing from inside, you may like to try better with Sandpaper if you don't have a dremel
jbedoya said:
...
I am not that good, but I was able to do the internal "reduction" in the power button and it works... I messed with the Camera Shutter (My reduction ends in a whole for the shooter). You may like to try reduction first, as te external look of the cover remains.
Click to expand...
Click to collapse
Here the result pictures
jbedoya said:
Here the result pictures
Click to expand...
Click to collapse
Ill give this a try.
I bought the body glove gel case after seeing it on my sister's captivate but didnt expect the buttons to not be cut out. They designed the captivate's so much better.
Thanks for the tip!

SGP Ultra Capsule real life pictures

as promised, here are the pictures we were talking about on the other topic.
i've been using it for 3 months now, i doubt you'll find another case that fits as perfect as the SGP well worth the $20
it comes with a screen protector as well
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
pictures taken from Nexus S
Thanks for the pix! Now that I see how it covers the chrome bezel, I am likely to pick one up. I have several dings in my bezel, and a nice case might be just the ticket.
Rearth Ringke - Silicone Case for Motorola Motoroi XT720
I just noticed this one while looking at the SGP (Also available in bright purple). It seems to crawl further over the screen and covers/protects some buttons. Anyone know what the big button next to the volume buttons does on the Motoroi?
Mioze7Ae said:
I just noticed this one while looking at the SGP (Also available in bright purple). It seems to crawl further over the screen and covers/protects some buttons. Anyone know what the big button next to the volume buttons does on the Motoroi?
Click to expand...
Click to collapse
very nice find
However.... according to the pictures, and my SGP case
it seems to point out the 4 touch buttons will be under the plastic
but never the less, it's a very good alternative, specially the purple colour one
Mioze7Ae said:
I just noticed this one while looking at the SGP (Also available in bright purple). It seems to crawl further over the screen and covers/protects some buttons. Anyone know what the big button next to the volume buttons does on the Motoroi?
Click to expand...
Click to collapse
It looks like a voice command button. Whatever it is, it is definitely missing from the XT720
AllGamer said:
very nice find
However.... according to the pictures, and my SGP case
it seems to point out the 4 touch buttons will be under the plastic
but never the less, it's a very good alternative, specially the purple colour one
Click to expand...
Click to collapse
I think that's not too big a problem since the case is silicone, so I suspect you can press the buttons. They seem to thin the case out there so that the lights show through. They do something similar with all the other buttons, too (volume etc). They're covered with a thiner region of silicone. The only holes are the proximity sensors, and where jacks go in (headphones, USB, HDMI, speaker, microphone, strap) and whatever that big button-looking thing is that isn't on our phone. The korean text says "DMB" there which based on some quick googling refers to the Motoroi's TV tuner--it's strange that everything else is covered, so perhaps that's a place you attach an antenna or something. It's interesting. I sort of feel like the silicone coming so close to the edge of the screen might interfere with using the scrollbar depending on how "sticky" the silicone is.
Got mine from Ebay. Very fast Delivery. 7 days from Korea to Singapore.
hey guys,
there's a new case design from SGP, it looks really interesting. have a look here.
Code:
http://www.exportprive.com/valencia-swarovski-crystal-leather-case-motoroi-xt720-white-p-13624.html
how abt org a bulk purchase for SG users...
@Spiderx_mm: look nice
@hermes76: good idea, i can safely say that non of the HP shops here sell case for our phone. The should know that not everyone using I'crap'Phone.
1. count me in
the gap thats ontop of the volume buttons is for the DMB button
aka Digital media broadcast button aka tv button
http://en.wikipedia.org/wiki/Digital_Multimedia_Broadcasting
yeap, most Japanese phones and Korean phones have build in TVs
for times cases exactly like what is happening right now in Japan
the TV does not require 3G, it is over the air like good old antennae TV, but it's Digital
Count me in too,if u guys are serious abt ordering the sgp case altogether.
How much did u pay in total?(Including every single cost) in Sing dollars?
For those who wants to order the SGP ultra capsule for Motoroi, better buy the new black leather case also from SGP. The rubber capsule doesn't look and feel as premier as the phone, so you decide.
chaud said:
How much did u pay in total?(Including every single cost) in Sing dollars?
Click to expand...
Click to collapse
Total i pay US$39.99 (Case = 19.99 + EMS shipping =20.00) = S$59+ .
Better buy when US$ rate drop.
Exchange rate: http://www.xe.com/ucc/
+1 recommendation
Just thought I would put my 2 cents in, the case is great and fits very well, I got one from korea through ebay and it came with a screen protector which is also really good. Very sturdy best case I have ever had for a phone.
One thing to keep in mind, the extra distance that the usb flap has to travel caused mine to fall off, not really an issue for me as I found it a little annoying but I would still like it to be on my phone if given a choice. Also the phone "feels" a little plasticy once you install it, it is a totally psychological thing but the phone does not feel as elegant once its on.
All in all tops
Oh, so I got this a little bit ago finally after about 5 weeks shipping. The case itself was a good fit for the most part, except for on the side where one part was popping out and not fitting tightly on like the rest of the case. Whether this was something to do with the way the case was packaged/stored or some other reason I don't know. After working with and trying to squeeze that part to fit, it's not as bad -though it still sticks out a bit. Probably will be fully gone once I wrap something around it and leave it on for a good little while (like an elastic wound tightly would probably do it).
Other than that, the case fits well. But the places around openings (i.e. camera button, power button, etc...) seem roughly cut and unpolished, though it isn't a very big deal, just slight quibble (and may just be mine).
The screen protector which comes with it is not as special as advertised I think, but it does the job and has a good smooth feel to it - and cleans more easily, so I like it.
The thing is, while the case looks nice, fits nice etc... the phone just looks and feels so much better without it on (slimmer, sleeker, nicer to hold etc...), so when I don't need the protection I take it off. But definitely a worthwhile purchase nonetheless.
I am getting my xt720 this week and am now looking for a case. i would really like to get a sgp capsule in black, though it seems like they discontinued this colour and now only sell blue and red.
any news on that front?
thx

Has anyone tried this specific "smart cover" case?

I looked around for smart covers on ebay and found the cover below. It doesn't fold around like this case does and in general looks more stable judging by the pictures (they could be wrong though).
Have any of you tried it? I have not found a review of it yet but I figured it might be worth asking.
http://www.ebay.com/itm/Black-Smart...ase-Cover-Google-nexus-7-Tablet-/280999623067
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Good question. I've been thinking about getting this case too. Anyone actually got it?
Looks cool, but it would have to be much more stable than it looks to me.
Sent from my Nexus 7 using Tapatalk 2
chacalau said:
Good question. I've been thinking about getting this case too. Anyone actually got it?
Click to expand...
Click to collapse
Yes I have this case, I tell you its a beautiful case to hold and look at. There are other colour variants available which I got the red one.
Its very sleek, doesn't add much weight or bulk to the device.
The sleep functions works brilliantly, and doesn't lock the device when you fold it over to hold like a book, which some do.
ONE DOWNSIDE!!!! - The stand is very hard to figure out (i have not yet figured how to fold it to make it stand up haha !)
Hope this helps answer your questions.
And I genuinly recommend this case as its ace ! (that rhymes weee)
Wilks3y said:
Yes I have this case, I tell you its a beautiful case to hold and look at. There are other colour variants available which I got the red one.
Click to expand...
Click to collapse
Have you got a link for any of the other colours? The ones I see in multiple colours are the ones with the wrap-around magnetic closure in the back (which I have, I'd like to have one that just lies over the screen for use at home).
formicae said:
Have you got a link for any of the other colours? The ones I see in multiple colours are the ones with the wrap-around magnetic closure in the back (which I have, I'd like to have one that just lies over the screen for use at home).
Click to expand...
Click to collapse
You're right mate, asif
Yeah the coloured variants have a lip that does go round the back, but its not noticeable and surely you want this to keep it nicely closed and secure?
Wilks3y said:
Yeah the coloured variants have a lip that does go round the back, but its not noticeable and surely you want this to keep it nicely closed and secure?
Click to expand...
Click to collapse
I think it's noticeable, especially when I have that extra flap to fold back over when I'm using the N7 in my hand.
I want to keep it closed and secure, sure, when it's in a bag or something. But my N7 spends most of its time on my coffee table or bar; I'd love to have a slim case with just a flap over the screen to keep the dust out. That doesn't cost $30+ like the Poetics or Portenzos of the world.
Wilks3y said:
Yes I have this case, I tell you its a beautiful case to hold and look at. There are other colour variants available which I got the red one.
Its very sleek, doesn't add much weight or bulk to the device.
The sleep functions works brilliantly, and doesn't lock the device when you fold it over to hold like a book, which some do.
ONE DOWNSIDE!!!! - The stand is very hard to figure out (i have not yet figured how to fold it to make it stand up haha !)
Hope this helps answer your questions.
And I genuinly recommend this case as its ace ! (that rhymes weee)
Click to expand...
Click to collapse
So do you have this exact case or not? I've seen the other ones and I'm not interested in them after reading the reviews. That's why I started a new thread about this one. If you do have this one, some pictures would be great.
I went and ordered one of these, but likely won't have it for a couple of weeks since it's coming from China. Will post my impressions when it arrives.
formicae said:
I went and ordered one of these, but likely won't have it for a couple of weeks since it's coming from China. Will post my impressions when it arrives.
Click to expand...
Click to collapse
there's a video review from youtube titled "Nexus 7 - Cheap eBay "Smart Cover" Review"
brickedman said:
there's a video review from youtube titled "Nexus 7 - Cheap eBay "Smart Cover" Review"
Click to expand...
Click to collapse
That's a different case, with the wrap-around flap on the right side. I already have that one.
look, heres the deal, that case may look pretty but any case like that wont stay closed. for it to be closed, there would have to be magnets along the edges like the portfolio. any case maker that says the case will stay closed without magnets on the border is lying.
I own one and its awesome. Buy it.
Sent from my Nexus 7 using XDA Premium HD app
I have got 1, build quality feels nice and it doesn't add much bulk to the device and also looks pretty sweet.
Sent from my Nexus 7 using xda app-developers app
I have to admit, I never really liked these cases... but after seeing that YouTube review online, I'm curious enough to give it a shot.
I'm absolutely in love with this Speck case, but I do have a minor concern with it. I use my Nexus 7 frequently, very frequently, and not only that but I use it for work. I'm continually walking up and down the hall at work going from one problem to another, using my N7 along the way. As a result, I'm concerned I may wear out the clip on the Speck case quite a bit. This only became a thought when I realized the clipping mechanism is significantly easier now than it was when I bought it. Broken in? Maybe. Will it get even softer? Very possible. This case ensures that won't happen since the magnets of course don't have physical contact to wear like that. While the higher stand up position seems a bit easy to topple over, the other one with the N7 (one I'd likely prefer anyway) looks a bit better in terms of stability.
At any rate, ah, I bought one just now - we'll see what happens when it gets here.
Edit - for what it's worth the one I ordered did indeed have the magnetic flap that goes around back to ensure it stays shut. I'm not sure I'd consider one without...
Case arrived today, so far I like it, the cover lies flatter than the eBay case with the extra flap, and it feels slimmer. Only downside so far is that it sometimes puts the tablet to sleep when I fold it back. We'll see if it gets better over time. I'll try to take pictures when I have a chance.
formicae said:
Case arrived today, so far I like it, the cover lies flatter than the eBay case with the extra flap, and it feels slimmer. Only downside so far is that it sometimes puts the tablet to sleep when I fold it back. We'll see if it gets better over time. I'll try to take pictures when I have a chance.
Click to expand...
Click to collapse
maybe slip something to block the magnet on the back? not sure what can maybe help on that front, but maybe a little thickness might be enough.
Side note, anyone have this and the poetic slimline case? I got the first case they had for my uncle, but it's a bit difficult for him to open. I'd get him a portenzo like mine, but it might actually add more bulk than I'd want for him.

[REVIEW] Aluminium Bumper

Today I took receipt of a grey Aluminium Bumper for the GT-N7100 Galaxy Note.
I bought them from eBay for about £14 from a UK seller, there are cheaper ones from China but I thought getting one from the UK would be quicker to get a hold of, in terms of delivery.
This is the first bumper like this I've ever owned, I had heard stories of people scratching their devices whilst installing the phone into these things, but I had no such issue. There wasn't a mark on the protector caused by the installation and, considering the screen protector is going to be much softer than the glass, thus easier to damage, so if there was going to be any damage, you'd see it on that.
On the note of installation, it was quick and easy. The phone sits nicely inside, there isn't any play as such but, when you "try" to move it around you can feel movement, but I think this is something of a good thing, for absorption purposes in case of a fall.
What I was surprised about, was the fact the back of the case sits almost flush with the back of the phone itself, offering no (extra) protection for the camera when you put it backside down, this fortunately is not the case for the front, the case adds about a 2mm edge to the screen, and so does get protection when you place it screen down on a table etc...
You can see that it comes well packaged, perhaps not as well as the Nillkin case I reviewed last month, but better than just being loose in an envelope.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There are pads on the inside of the case that the phone actually sits on (not on the bare metal itself.)
To use the buttons on the phone, it has it's own raised buttons on the case, they work really well and are quite rigid.
It's very precisely cut, the mic holes are correct and inline.
And the original Samsung cable fits just fine too.
All-in-all I'm quite impressed, I don't think It's worth the £14 I paid, but It's the just one of the cons of wanting it quick, as opposed to waiting for a delivery from China.
Also, to dispel any reports/myths, that it out makes the signal worse, the phone and other internal radios haven't been affected by the case in anyway.
There are plenty of sellers on eBay selling them for you to buy from, but here is the seller I bought mine from http://www.ebay.co.uk/itm/281008440...eName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Update:
Due to the concerns I have about damage to the camera lens that this and, other cases that don't fully surround the phone don't protect against, when placed on a table for example, I have simply cut a piece of a screen protector, from a protector for a phone I no longer own, and placed it over the lens.
This has not affected image quality, or affected the way the auto focus works or the speed off it in anyway. With this in place, I am no longer worried about minor scratches that could be caused by putting the phone down on a desk/table. In my opinion, this is a suitable solution not just for this case, but just to have in general, regardless of what case (if any at all) you choose to use
I really like the looks of this case!
How close is the fit? Does the phone wiggle around at all inside the bumper?
One of the other Ebay listings for this has a video showing installation, for anyone interested: Oops... not enough posts.
You can search Youtube for "Aluminum Bumper Metal Alloy case for SAMSUNG Galaxy Note 2 (GT-N7100) / Note 2 LTE (GT-N7105)"
Roundabouts said:
I really like the looks of this case!
How close is the fit? Does the phone wiggle around at all inside the bumper?
One of the other Ebay listings for this has a video showing installation, for anyone interested: Oops... not enough posts.
You can search Youtube for "Aluminum Bumper Metal Alloy case for SAMSUNG Galaxy Note 2 (GT-N7100) / Note 2 LTE (GT-N7105)"
Click to expand...
Click to collapse
I did mention movement in the review
"The phone sits nicely inside, there isn't any play as such but, when you "try" to move it around you can feel movement, but I think this is something of a good thing, for absorption purposes in case of a fall. "
But to elaborate on it more, it fits tightly and there isn't any movement but, If you try to force movement you can tell that there is a bit of give, probably from the pads compressing. It's nothing bad and is probably good that it happens the way it does.
Ah, my brain skipped over that for some reason, sorry!
I noticed in the pictures and video that the pads don't seem to cover the entire inside. The corners are exposed, and I am worried about the phone contacting the unpadded parts when dropped. Also, it looks like the rear shots of the case show light between the bumper and sides of the phone.
Extra padding isn't hard to add, so I may give this a try.
Roundabouts said:
I read your post, but I wasn't clear on what I meant by wiggle.
I noticed in the pictures and video that the pads don't seem to cover the entire inside. The corners are exposed, and I was worried about the phone contacting the unpadded parts when dropped.
This is something I can easily fix on my own, if there's an issue, so I think I'm going to give this case a try!
Click to expand...
Click to collapse
Ahh, I know what you mean now. It'll be real easy to add some extra padding if needed, you'd just need to get some self adhesive foam and stick it where you want it.
Can you give a quick mention on the sliding cover peice, does it rub the edges of the screen? Someone said somewhere that the screen rubs on the peice that you slide back on to cover the top.
Thanks,
1FstYOTA said:
Can you give a quick mention on the sliding cover peice, does it rub the edges of the screen? Someone said somewhere that the screen rubs on the peice that you slide back on to cover the top.
Thanks,
Click to expand...
Click to collapse
From the first post:
"This is the first bumper like this I've ever owned, I had heard stories of people scratching their devices whilst installing the phone into these things, but I had no such issue. There wasn't a mark on the protector caused by the installation and, considering the screen protector is going to be much softer than the glass, thus easier to damage, so if there was going to be any damage, you'd see it on that."
Sent from my GT-N7100 using Tapatalk 2
Ok, now comes the question, since I'm looking at this and the hard case you reviewed, which do you prefer using as your daily case? Love the look of the aluminium bumper, but the back not being as protective as the front is what makes me dislike it...
Thanks.
sHaHiN786 said:
Ok, now comes the question, since I'm looking at this and the hard case you reviewed, which do you prefer using as your daily case? Love the look of the aluminium bumper, but the back not being as protective as the front is what makes me dislike it...
Thanks.
Click to expand...
Click to collapse
Well, I think I'm actually leaning towards the bumper I have a protector on the screen, and the back plate can be replaced if it gets mega scratched etc... I think the bumper just looks so much cooler than anything I've had before.
I have got a fully covering leather case for full protection when I know I'm going to be somewhere that I could cause some real damage if I dropped it, like when going out walking etc... but day-to-day the bumper is the route "I'd" take.
Sent from my GT-N7100 using Tapatalk 2
RavenY2K3 said:
From the first post:
"This is the first bumper like this I've ever owned, I had heard stories of people scratching their devices whilst installing the phone into these things, but I had no such issue. There wasn't a mark on the protector caused by the installation and, considering the screen protector is going to be much softer than the glass, thus easier to damage, so if there was going to be any damage, you'd see it on that."
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
ugh case of the Monday, well thanks man my should be here anyday now.
Thanks for the review can't wait to get mine.
Due to the concerns I have about damage to the camera lens that this and, other cases that don't fully surround the phone don't protect against, when placed on a table for example, I have simply cut a piece of a screen protector, from a protector for a phone I no longer own, and placed it over the lens.
This has not affected image quality, or affected the way the auto focus works or the speed off it in anyway. With this in place, I am no longer worried about minor scratches that could be caused by putting the phone down on a desk/table. In my opinion, this is a suitable solution not just for this case, but just to have in general, regardless of what case (if any at all) you choose to use
First post updated.
Sent from my GT-N7100 using Tapatalk 2
OMG thanks for the review!! ive been wanting one of these but havent found a good review for it online! you mentioned that this particular case doesnt offer protection for the camera since it is flush with the device. However on amazon i found this one:
http://www.amazon.com/ZuGadgets-Alu...391&sr=8-7&keywords=galaxy+note+2+bumper+case
it looks identical to the case you have, but in the pictures, it shows that the case is elevated slightly from the phone itself. do you think this could be different from the one you have?
thanks!
Good review
but I'm wondering whether this aluminium kind of bumper blocks the GPS signal or not when the phone is used as Navigation. Pls try to use the bumper and turn the GPS on. . Will there be any problem? thanx
There was another review on here regarding a metal bumper and according to him it did not affect the gps but it did affect the nfc..
TraktoR6666 said:
Good review
but I'm wondering whether this aluminium kind of bumper blocks the GPS signal or not when the phone is used as Navigation. Pls try to use the bumper and turn the GPS on. . Will there be any problem? thanx
Click to expand...
Click to collapse
This does not impact GPS/NFC. I have noticed roughly a one bar drop in cell signal but that's it. I've had mine for almost a month and no issues.
fadilkarim said:
OMG thanks for the review!! ive been wanting one of these but havent found a good review for it online! you mentioned that this particular case doesnt offer protection for the camera since it is flush with the device. However on amazon i found this one:
http://www.amazon.com/ZuGadgets-Alu...391&sr=8-7&keywords=galaxy+note+2+bumper+case
it looks identical to the case you have, but in the pictures, it shows that the case is elevated slightly from the phone itself. do you think this could be different from the one you have?
thanks!
Click to expand...
Click to collapse
It's just the camera angle, if I take a picture at the same angle, it will give the same illusion.
And regarding GPS signal, the case "does" affect it. I've been meaning to make a video showing exactly what happens, I'll try and make and upload one tomorrow.
Sent from my GT-N7100 using Tapatalk 2
Anyone find one similar to the element case for iphone and Galaxy S3. I like bumper cases but the idea of a snap together 2 piece one does not seem secure enough to me. The screw together case seems like it would be much better.
I ordered this exact case on Friday. Should be here this week.
Sent from my SPH-L900 using xda app-developers app
RavenY2K3 said:
It's just the camera angle, if I take a picture at the same angle, it will give the same illusion.
And regarding GPS signal, the case "does" affect it. I've been meaning to make a video showing exactly what happens, I'll try and make and upload one tomorrow.
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
Wow those clever dogs! lol damn im disappointed. and now that u mention it affecting gps signal i think ill get another case. Im glad i stumbled on your review!!
might go for an otterbox... lol
RavenY2K3 said:
And regarding GPS signal, the case "does" affect it.
Click to expand...
Click to collapse
Too bad, otherwise it would be a great bumper case.

XPERIA T Cases/Pouches/Bumpers

Ok, since there is no general thread dedicated to Xperia T cases, I decided to start one.
Not to open new thread for every new case some of us get at that moment, let this be collection of all cases/pouches/bumpers, or whatever your phone protection is called.
I will start this thread with my first case for Xperia T, I recieved just this morning.
It's the Nillkin Xperia T case, ordered from eBay, and I must say it looks amazing on phone.
This is probably the best case I ever had on any phone (and I had like 10 cases form my Xperia Arc S).
It is very precisely shaped, and material finish is very good, not like some cheap plastic.
Here are 2 pictures I took just few minutes ago:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice, looks almost like being a part of the device.
My greetings to Sarajevo :good:
@mr_torture nice case mate. All buttons are working fine of it's difficult pressing them? Usb? I had a case on my xperia u and was a pain in the *** . Thanks in advance
DaRk-L0rD said:
@mr_torture nice case mate. All buttons are working fine of it's difficult pressing them? Usb? I had a case on my xperia u and was a pain in the *** . Thanks in advance
Click to expand...
Click to collapse
Yeah, buttons are very comfort for pressing, and also, usb plug is perfectly comfort for usb cable, with no interruption at all when being connected. After few days of usage, I can say with no doubt that this is the best looking/best built case I ever had.
mr_torture said:
Yeah, buttons are very comfort for pressing, and also, usb plug is perfectly comfort for usb cable, with no interruption at all when being connected. After few days of usage, I can say with no doubt that this is the best looking/best built case I ever had.
Click to expand...
Click to collapse
Nice to hear that mate
I think i am going to buy this case too. The only doubt i had with the buttons. Xperia U's cover was in plastic and after a couple of days wasn't covering the right side of the phone. Was totally deformed!
mr_torture said:
Yeah, buttons are very comfort for pressing, and also, usb plug is perfectly comfort for usb cable, with no interruption at all when being connected. After few days of usage, I can say with no doubt that this is the best looking/best built case I ever had.
Click to expand...
Click to collapse
I have been using this cover since beginning of having phone and had to stop. Cover scratched shiny frame next to touch panel. I will do some photos.
So what when I have clear back when my TP frame is scratched?
Scratched appeared next to buttons - there where the cover is very thin and easy to deformate. Never used the phone in difficult conditions or bad weather.
Also cover is causing small preasure in corners of back body. So expect in short time the same effect as not using cover. Rubbered corners will be damaged or scratched too.
Whole cover is not too hard and works while using the XPERIA or got phone in pocket.
If anyone wanna buy, got for sale NIKKILIN cover but black
qubbus said:
I have been using this cover since beginning of having phone and had to stop. Cover scratched shiny frame next to touch panel. I will do some photos.
So what when I have clear back when my TP frame is scratched?
Scratched appeared next to buttons - there where the cover is very thin and easy to deformate. Never used the phone in difficult conditions or bad weather.
Also cover is causing small preasure in corners of back body. So expect in short time the same effect as not using cover. Rubbered corners will be damaged or scratched too.
Whole cover is not too hard and works while using the XPERIA or got phone in pocket.
If anyone wanna buy, got for sale NIKKILIN cover but black
Click to expand...
Click to collapse
Some photos would be really nice, because I'm not sure what "shiny" part you are reffering to, and also I'm not sure how could any non-moving part, as this case is, scratch something.
I don't know, I switched like 5 different hard cases on my last phone, Xperia Arc S, and I never had any scratch or damage on my phone, and you know that Xperia Arc is having very sensitive chrome edge around phone.
I'm not having any reason not to believe you but I would really like to see some photos, to see what kind of damages you are talking about.
Thanks in advance.
Update: Forgot to say that this case concretely is the best built hard case I ever had, and not just that, but probably the best hard case I ever saw in any of my friends phones. And generally Nillkin cases are regarded as good quality ones, so that makes me wonder how could it make such a bad damages to phone.
Some photos of damage. It is small scratches... but occurred in 2 months of using the phone with nikillin case.... I want to underline that phone have been used with maximum care and never used in dust or dirty. Also in pocket never other things or much pressure.
Sent from my LT30p using XDA Premium 4 mobile app
Now, are you talking about those white lines, or those little spots all around...
These white lines are just light reflections I guess, so I suppose you're talking about these spots.
Anyway, thanks for your feedback.
I guess that pressure while carrying phone in pocket is also having its part in this, because it still seems unnatural to me that case alone could make such a damage, but I might be wrong.
Also, not related to your post, I'm planning to order leather pouch also, from eBay, to take the phone out of this hard case from time to time.
I discovered that there are official leather pouches from brand called Roxfit, and they really seem like a great quality. They are creating pouches / flip cases, for various Xperia models.
This is their webpage:
http://www.roxfit.mobi
http://www.roxfit.mobi/#!xperia-t/c1c0r
And this is the pouch I want to order from eBay (its much cheaper than on official page):
http://www.ebay.co.uk/itm/221231391133?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649
Its originally for Xperia SP, but since dimensions are almost identical, the T will fit perfectly in this one.
just a tip, if you working a handwork, or you are many time outside. dont use such thing.
i saw it at my brothers last Sony.
hes working with cars (no office job), and with the time little dust or whatever go near the case, everytime he pulled it out and in, he got miniscratches. you will notice that later...
at the end it was full of scratches. looked horrible^^
it was an ArcS (shiny backside)
i mean these leather bags look nice, but if you not take care dust or sand or whatever, you will regret it later.
and thats the point, why buy a leatherbag for protection, when you have to take care the using. then you also can use it without that bag.
maybe its different, because the T hasnt shiny backside, but in my opinion this type hasnt the best well-wrought conecpt.
mr_torture said:
Now, are you talking about those white lines, or those little spots all around...
These white lines are just light reflections I guess, so I suppose you're talking about these spots.
Anyway, thanks for your feedback.
I guess that pressure while carrying phone in pocket is also having its part in this, because it still seems unnatural to me that case alone could make such a damage, but I might be wrong.
Click to expand...
Click to collapse
Yes, I meant white spots and scratches, not reflections. It is very very difficult to do a good photo of them.
My trousers are loose, so there was no pressure... Also in the pocket of the jacket was no preasure.
I noticed longer cooling down of the phone after gaming longer time or wheather is warm... It is not good for CPU/GPU.
Well, the way I see it, protective cases (all kind of, from hard cases, to flip, to leather puches), are only useful for some "accidental" events.
Like accidental drops, kicks, scratches, or so...
If you're a kind of "rough" user, not carrying too much about about your phone, then it will get weary and damaged eventually, with or without protective case.
Case in point, my last phone was Xperia Arc S, a very shiny piece of hardware (therefore very sensitive to all kind of scratches), and I used various hard cases and leather pouches on it. In a year and half of usage, till the moment I sold it, it never get any scratch on its body, not a single one, believe me. Beside that famous crack above sensor, housing itself was in state that it was the first day I bought it.
To conclude, if you're careful enough, you can keep your phone in mint state, and various cases are only a helpful tool for keeping phone protected from accidents, not from yourself. If you're not careful, your phone will be damaged by time, no matter what case you keep on it.
mr_torture said:
Well, the way I see it, protective cases (all kind of, from hard cases, to flip, to leather puches), are only useful for some "accidental" events.
Like accidental drops, kicks, scratches, or so...
If you're a kind of "rough" user, not carrying too much about about your phone, then it will get weary and damaged eventually, with or without protective case.
Case in point, my last phone was Xperia Arc S, a very shiny piece of hardware (therefore very sensitive to all kind of scratches), and I used various hard cases and leather pouches on it. In a year and half of usage, till the moment I sold it, it never get any scratch on its body, not a single one, believe me. Beside that famous crack above sensor, housing itself was in state that it was the first day I bought it.
To conclude, if you're careful enough, you can keep your phone in mint state, and various cases are only a helpful tool for keeping phone protected from accidents, not from yourself. If you're not careful, your phone will be damaged by time, no matter what case you keep on it.
Click to expand...
Click to collapse
Just observe yours XPERIA and buttons area If you see some scratches in 2 months, please give feedback.
I can agree that case is very good built.
Hmmm, even nikillin case will not help if you drop phone
qubbus said:
Just observe yours XPERIA and buttons area If you see some scratches in 2 months, please give feedback.
I can agree that case is very good built.
Hmmm, even nikillin case will not help if you drop phone
Click to expand...
Click to collapse
I was replying to previous poster, who said that it's not "safe" to carry your phone in leather pouches.
And based on your experience, I guess I will not keep the phone in this case for next 2 months constantly.
I don't know, maybe some tpu/silicon case is better option then, but I'm just sick of those S-Line tpu cases, as everyone is carrying them around...
mr_torture said:
I was replying to previous poster, who said that it's not "safe" to carry your phone in leather pouches.
And based on your experience, I guess I will not keep the phone in this case for next 2 months constantly.
I don't know, maybe some tpu/silicon case is better option then, but I'm just sick of those S-Line tpu cases, as everyone is carrying them around...
Click to expand...
Click to collapse
I'm not quite sure about humidity and silicone case put on the phone. In warmer day you always get some humidity in pocket from your body. The same in winter - from cold to warm - water is liquefing. Dunno how sealed silicone case affect on that.
mr_torture said:
I was replying to previous poster, who said that it's not "safe" to carry your phone in leather pouches.
And based on your experience, I guess I will not keep the phone in this case for next 2 months constantly.
I don't know, maybe some tpu/silicon case is better option then, but I'm just sick of those S-Line tpu cases, as everyone is carrying them around...
Click to expand...
Click to collapse
I have tried the S line case and it seemed bit flimsy on the sides and was constantly snapping around when using the screen which could damaged the sides as in those pics posted.
I got another TPU GEL/Rubber case afterwards (link below), and has been in use for nearly an year now. Just noticed a tiny bit of the coating peeling off near headphone jack on top, but no other damages.
http://www.ebay.co.uk/itm/TPU-GEL-RUBBER-CASE-FOR-SONY-XPERIA-T-CLEAR-BLACK-/290949747829?pt=UK_MobilePhones_MobilePhonesCasesPouches&hash=item43bdf4d475
Wow, I just discovered this:
http://www.incipio.com/cases/smartp...t-tl-cases/sony-xperia-t-tl-dualpro-case.html
It seems like a rock solid quality. What you get are two different layers. One made of silicon that goes directly on phone, and another made out of some hard material, that goes over the silicon one.
The price is 30 dollars on official page, and I found it on eBay too, for the same price (with shipping included):
http://www.ebay.co.uk/itm/New-OEM-I...t=US_Cell_Phone_PDA_Cases&hash=item25820428cc
I have this same case, only in black, the phone is also black, and I think a great cover is thin, does not break too the great design of this phone, and is resistant to shock like no other, perhaps more expensive than other alternatives, but if someone wants a good case, without hesitation buying this.
Ruben2k2 said:
I have this same case, only in black, the phone is also black, and I think a great cover is thin, does not break too the great design of this phone, and is resistant to shock like no other, perhaps more expensive than other alternatives, but if someone wants a good case, without hesitation buying this.
Click to expand...
Click to collapse
Well, thanks alot for your feedback. I'm torturing myself since I discovered this, should I go for it, or not...
So it is great, as I thought it is. Can you just tell me how good it's fitting the phone. Because this is the first time I'm seeing the case like this, with two different layers. I guess it is fitting phone tightly enough, judging by price.
I have ordered one of these (click to enlarge)
£4.95 + FREE UK delivery
I decided this was the best design as the clip is on the left side and wont get in my way when the phone is in my hand
http://www.amazon.co.uk/iTALKonline...1215&sr=1-4&keywords=italkonline+xperia+lt30p
When it arrives ill let yall know if its any good
(putting cards in there will more than likely cause damage (imprint my account number on the screen lol) and im a little worried about the magnet in the clip. not sure if this is an issue nowadays but I know a magnet sends old pc monitors permanently purple

Categories

Resources