hi
recently i bought hd7, but my gprs internet connection wont work sometimes, what should i do ?
i have tried different settings, but it didnt help. sometimes it connects , but most of the time it doesnt connect !
Did you turn on the roaming option under the celluar settings? It might be on the "Don't roam" option, so it actually stops the data connection once you enter a roaming area.
thnx it seems working now
marSoul said:
thnx it seems working now
Click to expand...
Click to collapse
You are most welcome ham vatan
are you persian ?
by the way, it seems when i connect my device with usb to pc, the internet is become slow on mobile, i mean the internet that shared with pc
after changing the roaming settings, again sometimes it doesnt connect
how can i make gprs setting for htc hd7???
how did u set your GPRS?
Go to settings, cellular and add apn
my gps is not working on my htc hd 7
hi
when enter the maps on htc hd 7 and select locate me it do nothing can any one help
Related
is the Windowns Live Connect only through Data Connection ( GPRS , 3G,...) OR We can use the Wifi instead as it will be cheaper
thanks
emad.ibrahim said:
is the Windowns Live Connect only through Data Connection ( GPRS , 3G,...) OR We can use the Wifi instead as it will be cheaper
thanks
Click to expand...
Click to collapse
Windows Live works just fine on wifi too.
every time I try to connect it must connect through data connection and can not connect through the wifi could you please help
BR
Dear Sir TaurusBullba
I need your help as you are now online , I post anopther issue today :
I need your help as I installed the Cab "dutythroy_black-3g-comm-manager_.cab, and after uninstalling this CAB I found that the "3G" Notification in the status bar beside the network signal is became only the sign "G" ; is there is anyway to return the sign "3G" back I tried the Hard reset but it is the same
the 2nd issue the Windows live connection as when I started to setup my hotmail account in it it connect direct to Data Connection and when I disable it to connect to My Wifi Connection , it takes along time and it says that i am out of data connection and I have to go to the Data Connection again to work fine
sorry for intruption but this 2 issues I need to solve with your help please
emad.ibrahim said:
every time I try to connect it must connect through data connection and can not connect through the wifi could you please help
BR
Click to expand...
Click to collapse
Live tries to connect via 3g/gprs by default, just connect wifi, then sign in to live - as soon as gprs connection starts, hit cancel.
It will be fine.
unwired4 said:
Live tries to connect via 3g/gprs by default, just connect wifi, then sign in to live - as soon as gprs connection starts, hit cancel.
It will be fine.
Click to expand...
Click to collapse
thanks for your reply, do you have answer for the 3G Signal that dissapeared and instead of it it only "G" after i unidtall the comm cab as I explained in the previous post
and for the Windows live I tried this morning the updated version and uninstall it and make a hard reset , is that may be the reason for all this mass
every time i try to go to my shared folders on my pc (local network) my htc is trying to enable 3g or gprs connection. it looks like i can't browse my local network using wifi but internet works great.
every time i connect to wifi i turn wifi on and 3g off
could u tell me what am i doin wrong?
is there any way to browse my lan using wifi connection?
am i missing an extra software?
thanks in advance.
anyone...
please...
settings>connections>connections>advanced>pick network
pick my network setting or what ever the name the non my isp setting
have on your device
is what i do when i want to make sure my pda use the bluetooth connection rather then cellphone
thank U...
Please help !
I can connect to my home Broadband using my XDA 11i but cna't get it to actually SHOW any web pages.
It tries searching but keeps trying to connect by GPRS .... sorry if I haven't explained it so well .
ANyways I can use the XDA for normal internet use BUT can't actually see any web pages when I try to connect by WiFI EVEN THOUGH the device says that it HAS a GOOD connection to my HOME BROADBAND !!??
HELP !!!!!!!
hi
i have the same problem on my ppc and i don't know how to access internet thru my adsl at home. it always connects to gprs for internet, messenger or email!! plz help
try checking if you really are connected thru your wifi. if so, open explorer on your phone while it is connected thru wifi, you'll konw when the icon circle with 2 arrows appear steady.
if not, set your settings to "the internet" instead of "work" then try again.
or you may be far from your wifi source, just for testing try to sit down in front of your wifi router while browsing.
worst comes to worst have a master rest and try again.
It does connect using the WiFI broadband but son't show any webpages and keeps tryin gto conect to GPRS >
Any SIMPLE suggestions ?
Thanks.
you obviously know how to turn on wifi on your alpine yes?
tunr on your wifi then go to the there is a little icon at teh bottom of the screen that shows all avalable connections, hold over select your home wifi connection, click connect when it appears select "internet" enter your wifi password and thats it, it will use your adsl connection if you turn on your wifi before you try to access the net, if you dont it will use gprs.
wifi must be on and connected before you use outlook/IE/opera ect. default is always gprs
Tried everything you said above -no luck !
Thanks anyway !!!!
wi-fi query
Hi zincubus try un-ticking automatic connect to non preferrred networks worked for me.
Thanks blowpipe - how do I find the OPTION you mentioned - I have tried so many different ways !
I have seen the it somewhere JUST can't find it now .
Thanks
wi-fi
Hi Zincubus look in wireless manager, there you have 3 symbles gprs blue tooth & wilan if you see these your'e on the correct page ,look along the bottom of the screen click on the symble like a pda with an arial on the side ,then you will see a square next to automaticaly connect to non preferred networks ,un tick it , then try to connect to your network ,good luck.
Hi
I just finished setting up Wifi and it works perfect. Is there any way i can make the Diamond use the Wifi connection for programs if such connection exist? Currently it alwasy open a 3G connection even if Wifi is enabled, which kinda sucks, since 3G traffic dont come cheap
So what i want is, if Wifi connection exist use that, else open a 3G connection.
Best regards
Mads
Yes, there is a way. Just go to settings-->connectins tab-->connections-->advanced tab-->select networks and select the one you want to use.
In WIFI settings you have to select the same connection at the "connect to" option!
regards
Hi demacus
Thanks for the reply, but I have some trouble following you guide. First in my Select networks I have to networks, “3” and “Arbejde”. 3 is the name of my ISP and the one that’s currently selected to be used by programs needing access to the internet. In my Wifi “Connect To” option I can’t select the “3” I can only select between “Arbejde” and “Internet” which is just to default networks.
So my question is still the same, how do I make the diamond use a wifi connection if one is present else enable a 3G connection and use that.
Best regards
Mads
Err... in my case, the way it works is.. if I connect to the Wifi, then 3g gets disabled for as long as I am connected to a Wifi network..
If Wifi is available and you ARE CONNECTED (just available isn't good enough, you have to be connected), my Touch Diamond doesn't use the 3G.
Soxiz said:
I can only select between “Arbejde” and “Internet” which is just to default networks.
Click to expand...
Click to collapse
Select Connect to The Internet
Hey L o r d R a j
The Internet option i am talking about have a description saying that its for use when connection to a VPN connection. My Wifi is active and if i change the setting in the Connection tab to use "Mit Arbejdsnetværk" the wifi works perfect for the browser etc.
Not sure what I or the danish rom i have is doing wrong. But i cant get it to use the wifi if its there, if not use the 3G.
If anyone have any ideas please let me know, thanks
Best regards
Mads
Hello,
I have an problem. When i'm connected to Wifi and launch Opera, weather update or anything else which uses internet. The diamond makes connection with the 3G/GPRS network. The wifi is being ignored or something.
I thougt that i had seen this problem before on this forum, but i searched and can't find it anymore.
Does anybody know an solution or knows where i can find one?
Grtz
You can set network priority up somewhere, i'd be of more help but i don't remember where this is in settings
I have also been looking for a solution to set network priority as wlan first but cant find where to..
ident
I've been reading this site a fair old bit recently! First time i've been influenced to post though. I'd also love a solution to this. Does anyone know how to change priority settings? I swear i'd turned GPRS off, but whenever I check the weather or internet, it connects, sometimes even when I have a wi-fi connection active.
I wish to only use my Diamond with the wi-fi, don't want to get raped on the data charges. Any help would be greatly appreciated Thanks.
Hesky87 said:
I've been reading this site a fair old bit recently! First time i've been influenced to post though. I'd also love a solution to this. Does anyone know how to change priority settings? I swear i'd turned GPRS off, but whenever I check the weather or internet, it connects, sometimes even when I have a wi-fi connection active.
I wish to only use my Diamond with the wi-fi, don't want to get raped on the data charges. Any help would be greatly appreciated Thanks.
Click to expand...
Click to collapse
That's the exact issue i have! Its bloody anoying!
how about using NoData or from Advance configuration utilities in comm manager actually disabling all other connections ? i've been confronted with the same problem many times and rather use the available Wi-Fi over the mobile internet connections, so that helped me
That's not good enough for me. I have a databundle so when i'm not at home i wanna use that internet. But when i'm at home i want wifi!
I think i found the problem. When you make a connection with a wifi network you can choose between "internet" and "work". When you choose internet there's nothing wrong. When you choose work it doesn't make some kind of internet connection so programs fall back to the gprs.
I'm having the same problems. I'm having a data subscription so don't want to disable it in total. What I tried was go to wifi settings --> network adapters. Selected internet from the drop down box on top (work was default for me). But Opera still connects through 3G or G. What settings did you change exactly Rik_X?
The settings that i changed is when you make a new wifi connection it asks if you want to connect as 'internet' or 'work'. You have to choose work.
With wifi networks allready configured you have to do the following:
Go to comm manager --> turn on WLAN and let it connect to the network --> then push settings --> Wireless LAN. Then go to Networkcards (in dutch its netwerkkaarten) (its under the SSID)
Then click on the connected network and change work into internet. Accept the setting and with a reconnect its works (for me)
Good luck
Rik_X said:
The settings that i changed is when you make a new wifi connection it asks if you want to connect as 'internet' or 'work'. You have to choose work.
With wifi networks allready configured you have to do the following:
Go to comm manager --> turn on WLAN and let it connect to the network --> then push settings --> Wireless LAN. Then go to Networkcards (in dutch its netwerkkaarten) (its under the SSID)
Then click on the connected network and change work into internet. Accept the setting and with a reconnect its works (for me)
Good luck
Click to expand...
Click to collapse
Dank je! This worked for me.
Moderators are working with the same