Database Develop

[Q] Mobile Network Connection Issues

At first i tried updating to the latest available update from Kies, once again it ****ed up my phone. So i flashed the latest stock update with Odin. At first i could not open up my Phone app/Contact app tho i got a signal and my Network was working perfect. I went into recover mode and cleared the cache and set the phone to default wipe. Now i get a phone signal, can open up all the applications but i get no Network signal. How can i fix this? Thanks in advanced, Wicksy.

Model Number: GT-I9000M
Firmware Version: 2.2
Baseband Version: I9000UGKC1
Kernel Version: 2.6.32.9 [email protected] #4
Build number: FROYO.UGKC1
Click to expand...
Click to collapse
-Sorry for double, would not let me save with that info for some reason-

Have you tried going into the network APN settings and checking that they are the same as what your network provider uses?

[Q] In Mexico. Which modem for Telcel?

Serendipity 6.4
Kernel: 2.6.32.9 - [email protected] #32
Baseband Version: I9000UGJK4
Firmware: 2.2.1
And I've also tried
Serendipity VII Build 3
Firmware: 2.3.3
Baseband: I9000TUBJV6
This phone was unlocked and it worked just fine in Taiwan.
I'm now in Baha Mexico, I have a Telcel SIM card, but it just does not work. And I absolutely must get this to work because checking email is critical for me. I don't know what to do. Do I need to update my modem? Which one do I need to update to?
1. My APN settings are all correct for Telcel:
Name: Internet
APN: internet.itelcel.com
Username: webgprs
Password: webgprs2002
MCC: 334
MNC: 020
Authentication Type: PAP
APN Type: Internet
2. I show signal on the signal bar, but no 3G or 1X. It says "Emergency Calls Only."
3. When I go dial the number to activate (*333) I get "Data Network Not Available"
4. When I search for the available Network Operators, Telcel pops up, but if I click on it I get "Unable to connect. Try again later." and "unable to select network. Select automatically." This happens over and over.
5. I called Telcel and it is confirmed that they are still waiting on me to dial in and activate my SIM card, using *333. The problem is, I can't dial in.
AHHHHHHHHHHHHHHH!!!!

Hope I helped
Is your IMEI correct, ive seen that cause problems so make sure you dont have the generic one as that will allow you to connect to some networks but not all, also if you keep having problems i'd suggest odin back to stock (that for sure Works on Telcel's network and if your IMEI is missing it might even give it back)and then update back up SlimBean seams to work quite well for me. Hope i helped, would have answered earlier but just bearly stumbbled on to this thread

agrs22 said:
Is your IMEI correct, ive seen that cause problems so make sure you dont have the generic one as that will allow you to connect to some networks but not all, also if you keep having problems i'd suggest odin back to stock (that for sure Works on Telcel's network and if your IMEI is missing it might even give it back)and then update back up SlimBean seams to work quite well for me. Hope i helped, would have answered earlier but just bearly stumbbled on to this thread
Click to expand...
Click to collapse
Sorry to say that this thread is nearly a year old, this guy probably doesn't need this info anymore

[Q] SIM Error on Simple Mobile, stumped...

Happy New Year folks.
I just ported my brother's AT&T number to a Simple Mobile account and I'm getting a SIM error notification icon on the top.
I don't get a window prompt of the SIM itself, I just recognize it from previous experiences.
Considered the following, but nothing worked:
- Manually adding the APN for Simple AND T-Mobile.
- Manually selecting another network operator.
- Tried reinserting the old AT&T SIM, the notification is gone of course, but I can't do anything that utilizes phone service because it's terminated.
- Searching around the rumors for a specific solution; found nothing relevant.
- Obtained an unlock code, but I can't access anything to input the code (even 2945#*925#, but I get mobile network not available),
- My IMEI is recognized by the Android OS, so I don't think I'm encountering any issues there.
Here's some info on the handset:
Baseband info: LG925AT-01-V10e-310-410-AUG-10-2011+0
Android Version: 2.3.7
Kernel: Version 2.6.35.7-cyanogenmod [email protected]) )
Mod Version: CyanogenMod-7-20121202-NIGHTLY-p925
Apologies if this has already been answered.
Any guidance would be infinitely appreciated.

FYI: Just made a back up and flashed with the latest barebone CM7 ROM.
No luck, same results.

Figured it out.
I flashed a stock ROM (rooted but I don't think it was relevant) and unlocked the phone from there via the dialer app.

unlocked HTC Desire C no signal but Data working

Hi everyone,
I have a desire C which was originally on the 3 mobile network, I unlocked it successfully to work with other sim cards and was using it on Orange for a few months.
I have also rooted the phone following the original nameless thread & installed the nameless ROM onto it. This works fine with the ORIGINAL 3 mobile sim card but not with any other sim card. AlI get is no service showing. I cannot make or receive calls, however data works fine (with or without wifi).
I have tried the following:
turning airplane mode on and off, also usin the *#*#4636#*#* (or whatever it is!) thing to get to the test menu and turn off radio and back on again.
Wiping to factory reset
Re-installing the rom from the phones recovery "install zip from SDcard" menu, - also installed the revolution 5en5e rom
IMEI Shows the original IMEI from the phone
If I go to my available networks list it shows me the EE (orange) network, o2 Network, Vodafone network & 3 Mobile network, but no matter which one I select it says your sim card does not allow connection to this network.
I've also tried to change the way it connects from auto to manual and vice versa, but each time it says unable to connect to this network at this time, please try again later.
I just cannot get it to give me signal unless its on the orignal sim & i'm sure the signal is worse than the stock rom.
I'm assuming it's a radio issue?? only assuming as I would have though I would have the error of invalid sim/network locked etc, but I don't know enough about it really.
So currently the phone sits with the following installed:
Android Version:
4.0.3
HTC Sense Version:
4.0
Software number:
ReVoluTion 5en5e Edition v1.0
HTC SDK API Level:
4.2.1
HTC Extension Version:
HTCExtension_403_1_GA_9
Kernal Version:
3.0.16-g51cada9
[email protected] #1
PREEMPT
Baseband Version:
10.11.98.09P_1.06.98.13M2
Build number:
2.00.401.2CL128321 release-keys
Browser Version:
WebKit/534.30
I hope someone can help & if you need more information please let me know!
Kind Regards,
Lee

Try unlocking your SIM again, but while on the new Rom?
Make them boys go loco!

Hi,
I don't get the option to unlock the phone as it accepts the sim, just gives me no signal. Before I unlocked the phone it used to say something along the lines of sim card not accepted, you then had the option to put the codes in to release it from its carrier.
regards,
lee

I had the same problem with my SIM card. Phone is unlocked but one day I see that I don't have any network signal.
So I snoop around trying my friends' SIM cards on my phone and they work.
Went to the office nearby and told them what happened. They said its a malfunctioning SIM card and change it for free.
Now i didn't notice whether I have data traffic working but it resolved my signal problem. Hope this helps.

I've tried 3 different sims on organge and o2 and have the same issue
I've called three mobile (original carrier) and they advise that there is no barring or anything on my profile.
I think I will try to reflash to factory and try again.....I cant think of any other way.
Lee

leeroy1982 said:
I've tried 3 different sims on organge and o2 and have the same issue
I've called three mobile (original carrier) and they advise that there is no barring or anything on my profile.
I think I will try to reflash to factory and try again.....I cant think of any other way.
Lee
Click to expand...
Click to collapse
Flashed boot.img & installed the "untouched__rom_v2.0eu_dcplx1" from this site and it does the same thing!
Does anyone know what else i can do?? or have a three mobile rom I can try?
Lee

Ok, managed to speak with three Tech support again, turns out my profile is not ok.
My phones imei has been blocked by........wait for it.........o2!!!!!
they are speaking with the fraud team and will hear back this week. How bizarre.
I don't understand how another network can block my imei from being on other networks apart from the original one? if it's blocked it's blocked surely....
ah well, will wait for the call back and post up with the outcome.
Lee

Spoke to three today who advise the phone is not blacklisted like they originally stated as they have spoken with O2.
They say there is nothing on my profile to block it and it should work.
I don't know where to go on this now.
Can anyone help please?
Lee

[Q] xt862 No Baseband or IMED

I would like some help with a xt862. I am still knew to all of this maybe I am missing something I didn't read in another thread.
I was given the phone in a very bad bricked state, most of the OS was damage to the point it could not backup and files from the phone I ended up just flashing a recovery mod back to it ver. 890 then tried the 906 and the 883. I also tried the stock roms, but to no avail. It shows unknown baseband and IMED Values, and when I *#*#4636#*#* and go to the radio it shows:
IMEI: unknown
Phone #:unknown
Current network:
----------------------------------------
Neighboring CID: unknown
Roaming: Not roaming
GSM Service: Out of service
GPRS Service: Disconnected
Network Type: Unknown
----------------------------------------
Set preferred network type: Unknown (changeable drop down) unable to change from Unknown it show all other available radio formats.
also I am unable to put it into airplane and if I try I become confused wither it is or not.
Any help on the this would be greatly appreciated.
TPMD-LWW