Hello,
I can not see the external sd card on my windows PC.
I can see the internal sd card as a drive and i have read write access on my win PC (XP/ prof and win7 prof)
I can see the external sd card as a drive but cannot see any files or folders.
connected USB cabel
select mass storage device
not possible to connect USB to PC via dialog (no notification is vissible in notification bar)
reconnect usb cable
Now it is possibel to connect USB to PC via upcoming dialog on phoneselect mass storage device Message box comes up telling that some apps may not work because they have access to sd card
After disconnecting the phone from PC I cannot access the external SD card on my phone until reboot of phone.
I can access the the external sd card using a card reader on my PC.
I think I got these problems since flashing Voodoo-stable-5.1-Froyo-2.2.1-GT-I9000
Firmware Version 2.2
Baseband I9000XXJPP
Kernel 2.6.32.9
I tried to format the sd card with the phone - no changes.
Best regards and thanks in advance O
I have the exact same problem, when I connect with usb cable to my win 7 x64 system using the mass storage option, at first I do not connect at all, then I have to remove the usb cable once, after that I can connect but only see the sd card on the phone itself, the external sd card is invisible.
When I remove the usb cable I am also unable to see the external sd card on the phone itself and I have to restart my phone in order to see it again.
My proplem is solved. By error I installed the voodoo 5.1. on Froyo 2.2 . But it should have been installed on Froyo 2.2.1 as mentioned in the filename of the zip file. I thought froyo 2.2.1 is included in the voodoo update.
Gesendet mit Tapatalk
Answer SD card not visable.
Set the USB to choose on connect and the select through the prompts and it works for me.
5.0.2 kernel are for 2.2
from 5.0.3 its all for 2.2.1 i also have same problem if i flash new kernel on 2.2 rom
Related
Hello, this is my firt post and i need help!
Now when i connect in kies mode the phone keeps mounting and unmouting the Sd cards! and hangs in starting,doesnt get recognised by keys. This issues only occurs in kies mode and not in mass storage. Could it be related to kies, the usb port or phone?
Thanks
Sent from my GT-I9000 using XDA App
Ok, I've tested in another pc and it does the same: keeps mounting and unmouting both sd cards and stays in starting to kies without connect to kies... So i thinks it's not kies itself or usb ports... Is there anything wrong with the phone or it's something i installed to? (before the problems it disconnected by mistake from kies then I got a damaged internal sd card info and external sd card corruption, but both are working fine and I didn't get that notification anymore...). What can i do? Shall a format solve this?
Formated the internal sd and nothing... but wait... removed the external sd card and voilá! it now works!!!
Odd. I know there's a bug in kies that won't let you connect if you have media files with more then 16 letters. That could be reason. Check your files and rename them. Also do a format the SD car dwith your phone in settings. Unmount then format. That should also help
Sent from my GT-I9000 using Tapatalk
Ok, it's doing the same again, with or without external sd... So i realy don't know what's appening!
Be sure to use the latest kies , it's a kies bug , but i am prety sure that the latest one has it fixed .
i have a problem....my sd card not detect on pc..any suggestion can hard reset my sd card??by the way how to backup data on device storage??
What do you mean that your "sd card not detect on pc"?
If your PC cannot access the SD card via USB connection to your phone while you are still able to access it on your phone, check that your X1's USB mode is set to "Disk Drive/File Transfer/Mass Storage" under Settings>Connections> USB to PC
If it cannot be detected on your X1 but can be detected if you were to directly plug your SD card into a card reader in your PC, blow into the SD slod on your phone.
If your SD card can be detected by the PC which prompts you to format it, it probably got corrupted and you need recovery tools like Recuva to recover the content. If it can be detected by either, it's probably dead.
I flashed voodoo 5.2 on JPJPG rom now there is a problem once i connect it to pc as mass storage device it only show my inernal sd card on pc and once i remove usb cabel it show same amount of memory used and left on both interenl and external sd
i have 8gb phone and 8gb micro sd
Before Connecting in USB MASS Storage MODE
After Connecting in USB MASS Storage MODE
It only go ok once i remove SD CARD and then insert it back
i need a software fix for this
anyone ????
Hello.
I use the following software: CM7 (encore-22) + GoogleApps (07/03/11) + Dalingrins OS Kernel (3/16/11).
Installation is made on emmc, not on SD-card.
If SD - card is inserted into the device, then when you connect your PC via USB cable, everything works fine, and from the PC and CD are visible the card and the internal disk partition (5Gb) both.
But if SD - card is not inserted in the device, then when you connect your PC via USB cable can not see any partitions.
How to correct this situation?
Thanks in advance.
When I connect my 4s (EU) to my PC, it detects the SD card (128GB Kingston or 64GB, both tried exFat and FAT32 formatted), but when opening the contents, it says there's nothing on it, while it has over 40 gb of data on it...!
What's going on? The card is up to spec!?!
The phone's own memory is shown correctly and I can access all maps. The SD card however is detected, but not accessible.
The only files I can see are the ones I copy from PC to phone's sd card over USB connection. But I want to copy photos and videos from phone to PC.....
I already tried uninstalling the Alcatel Idol 4s driver, and reconnected to get this phone mounted again, and the result is the same.
Anyone have this too? Fix?
PS: I've tried FAT32 formatting as well as ExFAT, both cases the PC detects the card, even tells me how much space is available, but shows NO contents and tells me the map is EMPTY!?!?!
Do you try usb debugging? Is ur phone locked when you connect it to pc?