Database Develop

Just wrapped the back of my official Samsung TPU case!

I received my black Samsung TPU case on Saturday. I'm not a fan of glossy black cases; I had a cheap one with my old Atrix a year ago and it ended up getting scratched and scuffed easily through normal everyday use.
I waxed the back of the Samsung case with carnauba car wax before using it. The back of the case started to show some scratches only after a few days of light usage, and it will only get worse. It was also a fingerprint magnet too as some of you guys already pointed out on the Samsung TPU case thread. I could not put the case down on its back without getting scratched over time.
Since I have OCD when it comes to glossy surfaces with scratches and fingerprints, I decided to order some 3M metallic wrap and wrap the back of the case. I tried to order ones as close to the stock titanium grey color as possible.
Here are the materials I ordered; brushed steel and brushed black metallic:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I thought brushed steel color looked closer to the stock titanium grey color so I decided to use that instead. The black metallic actually looks darker in person. It took me about 10 minutes to apply and cut.
Here are my results:
So far, I'm loving it! No finger prints! And based on experience with other 3M products I've used in the past, this shouldn't scratch nearly as easily as the original gloss black finish on the case. The only thing that is bugging me a little bit is that it looks too plain; I need to slap on a sticker or something like that.
What do you guys think?

It's beautiful! I'm not familiar with the metallic wrap...is it actually metal or just metal look? Is it a sticker? I guess i could just Google it...
I love how it looks!
Sent from my Awesome Ginormous Note 2

That looks good maybe I should order one and have you do one for me in some 3M Carbon wrap. I live in L. A. too.

planetbeen said:
It's beautiful! I'm not familiar with the metallic wrap...is it actually metal or just metal look? Is it a sticker? I guess i could just Google it...
I love how it looks!
Sent from my Awesome Ginormous Note 2
Click to expand...
Click to collapse
It's a sticker and it's just the metal look. The 3M stuff is some high quality stuff. It's used a lot for automobiles.
pablo7 said:
That looks good maybe I should order one and have you do one for me in some 3M Carbon wrap. I live in L. A. too.
Click to expand...
Click to collapse
It's actually pretty easy to do. Just apply it on as well as you can by hand, then use a blow dryer to make the material soft and press firmly on the edges so the indents on the edges show up better. Just trace along the edges with an art knife and remove the excess. That's pretty much it.

Very nice job, in deed, and probably going to do it...Since, I cannot find no protection in Hungary, I just used some electrical tape,,yes does not look nice, but, it is protecting the back of the phone

looks good, nice job! I have the same case but have the Seidio surface coming. I did not like the gloss either but it is a surprisingly good TPU case especially for 50% off on the Samsung website.

You can order enough of the 3M Scotchprint 1080 vinyl to cover the back of your phone for $1.99 per sheet + shipping here: http://www.metrorestyling.com/3M-Scotchprint-Series-1080-Brushed-p/smpl1080br.htm
This stuff is marketed to apply to the exterior of cars as a substitute for custom painting. It must be pretty durable if it is expected to hold up to normal road hazards. The samples are described as being 4x8 inch and shipping to my address was just $2
Search on key word "sample" and you can order other colors, styles, makes etc. i.e. carbon fiber, several styles of camouflage, solid colors.
It just occurred to me there is a 50/50 chance whether the grain of the brushed surface may be running in the horizontal or vertical direction. If that matters to you you might want to find a source for a larger piece such as this
http://www.amazon.com/3M-1080-Scotc...&sr=1-10&keywords=3M+Scotchprint+1080+brushed

Man very nice work, wish I had such steady hands, lol...

gatorrph said:
You can order enough of the 3M Scotchprint 1080 vinyl to cover the back of your phone for $1.99 per sheet + shipping here: http://www.metrorestyling.com/3M-Scotchprint-Series-1080-Brushed-p/smpl1080br.htm
This stuff is marketed to apply to the exterior of cars as a substitute for custom painting. It must be pretty durable if it is expected to hold up to normal road hazards. The samples are described as being 4x8 inch and shipping to my address was just $2
Search on key word "sample" and you can order other colors, styles, makes etc. i.e. carbon fiber, several styles of camouflage, solid colors.
It just occurred to me there is a 50/50 chance whether the grain of the brushed surface may be running in the horizontal or vertical direction. If that matters to you you might want to find a source for a larger piece such as this
http://www.amazon.com/3M-1080-Scotc...&sr=1-10&keywords=3M+Scotchprint+1080+brushed
Click to expand...
Click to collapse
This seems like a great inexpensive source for the material. Personally it would matter to me and I would want the grain to run in the long direction from the top to the bottom of the phone. One of us should give them a call and ask if the samples ship in one orientation or if it's random.

SUPCASE Cases Look Pretty Nice!

Man these look beautiful. Can't wait to see how Spigen One Ups them with their hybrid cases.
http://www.amazon.com/SUPCASE-All-...=UTF8&qid=1395846448&sr=8-24&keywords=HTC+m8
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This one looks like a UAG type case but it covers the front and that ugly HTC black bar.
http://www.amazon.com/SUPCASE-All-N...=UTF8&qid=1395846604&sr=8-21&keywords=HTC+m8
Sent from my Nexus 7 using Tapatalk

the second one has a plastic screen protector built in...that sucks. otherwise the design looks cool, just too bulky. I have a nillkin tempered glass on my m8 and my nillikin case should be here soon!

these look great! thanks for the heads up

Wow, that second one looks amazing, do you know the price maybe ? And how do you mean built in screen protector

Razer9 said:
Wow, that second one looks amazing, do you know the price maybe ? And how do you mean built in screen protector
Click to expand...
Click to collapse
i get my supcase in today. i'll post shots

IR Question
Do you just cut off the rubber over the power button for IR control?

speedysloth said:
Do you just cut off the rubber over the power button for IR control?
Click to expand...
Click to collapse
Just got mine. There's a cut out for the power button/ir transmitter. Its slightly loose on the extreme top.
And the supcase logo on the back isn't centered and its a bit crooked. Other than that its fine for a 10$ case

sheek360 said:
Just got mine. There's a cut out for the power button/ir transmitter. Its slightly loose on the extreme top.
And the supcase logo on the back isn't centered and its a bit crooked. Other than that its fine for a 10$ case
Click to expand...
Click to collapse
Awesome, in for one then!

If anyone has one of these, can you describe the quality of the built in screen protector?
Does it feel like cheap plastic or glass? Does dust get trapped under there easily?
Would really appreciate it, that Supcase full body unicorn beetle looks awesome in my opinion!

I bought this Supcase.
http://www.amazon.co.uk/gp/aw/d/B00IJ0R1XW/ref=redir_mdp_mobile?ref_=pe_385721_37038051_TE_3p_dp_1
Quality seems good. The clear power button is not loose at all. Lovely design, plenty of room around the camera and flash. Plenty of room around the headphone socket. No sharp edges that I find on some ~£10 cases.
Only problem is I ordered blue, and they sent me black...
Sent from my HTC One_M8 using XDA Premium 4 mobile app

I have both the Hybrid and the Unicorn Beetle... Didn't like the Hybrid at all. The fit on it is not that good, the top and bottom lips are a bit loose and saggy. Because of that, a lot dust and lint collects through there and into the case. I took it off after a week and also noticed some scratching on the clear glossy back. I don't recommend it at all, I think after some time, this case could possibly do more harm than good to your phone.
However, I also got the Unicorn Beetle and love the case! It's as if it was made by a different manufacturer, lol. The case fits perfect, good and snug, but not too tight. I wasn't crazy about the matte plastic bumper at first, it felt kind of slippery, but after a few days it seems to have broken in and feels good, nice grip. Highly recommend the Beetle over the Hybrid, totally worth the extra $4 or so.

i'm interested in the supcase white/clear but can anyone confirm if the white yellows? thanks.

which one?
aimfire72 said:
I have both the Hybrid and the Unicorn Beetle... Didn't like the Hybrid at all. The fit on it is not that good, the top and bottom lips are a bit loose and saggy. Because of that, a lot dust and lint collects through there and into the case. I took it off after a week and also noticed some scratching on the clear glossy back. I don't recommend it at all, I think after some time, this case could possibly do more harm than good to your phone.
However, I also got the Unicorn Beetle and love the case! It's as if it was made by a different manufacturer, lol. The case fits perfect, good and snug, but not too tight. I wasn't crazy about the matte plastic bumper at first, it felt kind of slippery, but after a few days it seems to have broken in and feels good, nice grip. Highly recommend the Beetle over the Hybrid, totally worth the extra $4 or so.
Click to expand...
Click to collapse
Would you be kind enough to link me to the Beetle over the hybrid please? All my searches come up the same =[

Vicsec said:
Would you be kind enough to link me to the Beetle over the hybrid please? All my searches come up the same =[
Click to expand...
Click to collapse
amazon [dot] com/gp/product/B00IJ0R02Y/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
That is the case that I ordered. Reasonable build quality, the rubber on the sides is pretty firm, and a little bit more grip-y than the naked phone.
I like the frosted back, as it feels resiliant enough to withstand an impact, but still shows off the brushed aluminum on the back of the phone.
Ive noticed a little bit of glare in photos with the flash enabled, I noticed that the edge surrounding the camera lens what polished so I lightly sanded it which noticeably decreased the problem.
The cutouts for the power and audio connections were a little sharp for me so I beveled them off with an exacto.
All in all, great quality case for what you are paying, and it makes me more confident in my grip on the phone!
I cant link because im to new a member apparently..

I would definitely get a case for this

Went into a tmobile store to see their demo blue coral and noticed a lot of scuff marks on the bottom rear of the phone. I can only assume they've only had this for a a week and it's already this bad. SMH. They are definitely scratches. I tried rubbing it off and ran my nails through it. Rough AF.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N910T3 using Tapatalk

My case is sitting right next to me thank god

Anyone that doesn't immediately get a case for a glass phone, gets what they deserve.

Maybe that's how they made gorilla glass 5 more durable to drops by making it softer. But now more susceptible to scratches.
Sent from my SM-N910T3 using Tapatalk

Speaking of cases, what is everyone planning on getting? I got a cheap Supcase Bettle unicorn, frosted case to begin with. I'll probably get a Spigen Neo hybrid later on.

I'm not going with a case... Toast said they'll have wooden skins ready by the end of the month, so that's what I'm going for.
Maybe leather if they make one. But not metal or plastic.

Aeltar said:
I'm not going with a case... Toast said they'll have wooden skins ready by the end of the month, so that's what I'm going for.
Maybe leather if they make one. But not metal or plastic.
Click to expand...
Click to collapse
Ok, looking at that...you convinced me not to use a typical case. What devices have you used this for? How does it protect against drops? I am not one of those who will beat down on their devices but sometimes I do forget it is on my lap while at movie theaters and it will drop....or stepping down from cars. Does it cover all the edges? Looking at the pictures on their websites I can't tell....give me the skinny!

mgbotoe said:
Ok, looking at that...you convinced me not to use a typical case. What devices have you used this for? How does it protect against drops? I am not one of those who will beat down on their devices but sometimes I do forget it is on my lap while at movie theaters and it will drop....or stepping down from cars. Does it cover all the edges? Looking at the pictures on their websites I can't tell....give me the skinny!
Click to expand...
Click to collapse
The very edges are slightly visible, but the corners are covered. The sides of the phone are also covered, and they include wooden button caps and camera lens covers. The front isn't covered unless you spend the $10 for a front cover, but if you do then of course the capacitive buttons and fingerprint scanner are left uncovered. The wood isn't thick enough to interfere with usage, thankfully, but it is the thickest and highest quality wood cover I've seen.
I don't have any phones that they make skins for, but I've visited their "factory" in Portland and handled several iPhones and Android phones with their skins attached. They're really nice and high quality, better than similar skins I own for other products.
Take a look at this video for a typical phone installation:
As you can see, nice and easy - just be careful about it, and go slow. It will re-adhere if you mess it up, but the first application is always the strongest by far, and you don't want those edges coming up.
E: I should clarify that you can re-apply in the first 5-10 minutes, but after that the adhesive is 'set' and will not be reusable. It's really strong adhesive, so it isn't going anywhere, but it also does have an oxygen-activated cure.

Skins are a thick sticker and protect as such. They are no replacement for a good case.

Stealth protection with SpeckCandyShell!

rile1564 said:
Skins are a thick sticker and protect as such. They are no replacement for a good case.
Click to expand...
Click to collapse
Agreed. A skin, even a wooden one, is not a case. They don't offer shatter protection - merely scratch protection. In this case they also make the phone look nicer in my opinion :good:

I would like to mention a small local company. They haven't put out a note 7 case yet. They offer several cases made out of exotic wood, and they look fan-****ing-tastic.
The company is called carved sorry I can't post a link yet

bdavid1122 said:
I would like to mention a small local company. They haven't put out a note 7 case yet. They offer several cases made out of exotic wood, and they look fan-****ing-tastic.
The company is called carved sorry I can't post a link yet
Click to expand...
Click to collapse
That sounds like it's up my alley. Here is the link for everyone else's convenience.

Aeltar said:
That sounds like it's up my alley. Here is the link for everyone else's convenience.
Click to expand...
Click to collapse
Looks like they do not make for the note series?

mgbotoe said:
Looks like they do not make for the note series?
Click to expand...
Click to collapse
The more requests they get, the more likely they are to make them.

Spigen all the way.
Sent from my SM-G928T using Tapatalk

aznmode said:
Maybe that's how they made gorilla glass 5 more durable to drops by making it softer. But now more susceptible to scratches.
That why i scoff at people that say you dont need a case because either its going to be easier to scratch or easier to shatter.
Sent from my SM-N910T3 using Tapatalk
Click to expand...
Click to collapse
This exactly. There is a trade off of hardness to toughness. Hardness is what prevents scratching but the harder you make it, the more shatter prone so in essence you lower the toughness
Sent from my SM-G935T using Tapatalk

I bought a clear case and it's sitting in a drawer waiting for my unit to arive.
Sent from my SM-N910T3 using Tapatalk

I'm getting a slim tpu for now since the spigen one I want won't ship till after I get my phone. My slim case is already here just waiting.....
Sent from my SM-N910T3 using Tapatalk

ask them where the scratches are from, it could've been dropped on the floor
are most of the scratches at the bottom? that's not where fingers typically rest

Thor Case will make OnePlus 3 a Beast from the outside

Has anyone tried ordering one of these from Aliexpress? I ordered one already and totally excited about it.
Some youtube videos of the case for other phones are already there. I am sure this sleek Beast and the Metal Thor cover would make a Machine in hand.
I ordered the Black one.
All I can say is These got looks and also can surely protect the phone with such bulk build.
PS: Sorry i cant attach pics here. I am new member in the forum and XDA will allow me to post pics after 10 posts. You can always google the case and tell me what you feel about it.

You mean this case?
I don't mean to be rude, but that's quite a case that could cause the Sixth Mass Extinction on Earth.
EDIT:
I mean, its so ugly - living beings might die just by looking at it.

plskillme said:
You mean this case?
I don't mean to be rude, but that's quite a case that could cause the Sixth Mass Extinction on Earth.
EDIT:
I mean, its so ugly - living beings might die just by looking at it.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
.
Totally agree. Imagine that thing sitting under your pillow

AWFULL !

That's the worst case I've ever seen

Aluminum Armor Thor Case The Flash Iron Man Phone Cases For oneplus 3(black) : Amazon
Aluminum Armor Thor Case The Flash Iron Man Phone Cases For oneplus 3(black) : Aliexpress

I have it. It's cool as hell but extremely inconvenient. It doesn't exactly fit well, slides with excess space and it likes to pull your screen protector up by the way it holds in place. It's cool as Hell though, forgot where I put it though.

RJMacReady said:
I have it. It's cool as hell but extremely inconvenient. It doesn't exactly fit well, slides with excess space and it likes to pull your screen protector up by the way it holds in place. It's cool as Hell though, forgot where I put it though.
Click to expand...
Click to collapse
in the bin i hope.

Wow, that looks like an 11 year olds wet dream.
Horrible.

OnePlus 3 Case - TUDIA Ultra Tough OMNIX [Heavy Duty] Hybrid [Full-body] Protective Case, best case imo
https://www.amazon.com/OnePlus-Case...=1-1-spons&keywords=tudia+case+oneplus+3&th=1

Here are some screens from Thor, but i am not using it
http://forum.xda-developers.com/showthread.php?p=67887857
About that Tudia, have it as well, but i am not satisfied with that so much... It's because through the hole for fingerprint sensor many times went through the humidity between front plastic cover and the glass of the phone, when i wear phone in my pocket in work, turned by side to my leg. As well front plastic cover after some time started cowering itself so when u touch on display through this u can feel it it doesn't fit.
But desing looking very nice, that tank cover has really nice desing
Sent from my ONEPLUS A3003 using Tapatalk

CRYPTfromCATACOMBZ said:
Here are some screens from Thor, but i am not using it
http://forum.xda-developers.com/showthread.php?p=67887857
About that Tudia, have it as well, but i am not satisfied with that so much... It's because through the hole for fingerprint sensor many times went through the humidity between front plastic cover and the glass of the phone, when i wear phone in my pocket in work, turned by side to my leg. As well front plastic cover after some time started cowering itself so when u touch on display through this u can feel it it doesn't fit.
But desing looking very nice, that tank cover has really nice desing
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Yeah, wasn't to happy with the hole for FP scanner. I don't use the scanner and have it disabled, so I went down and bought a package of plastic laminating sheets and cut two oval pieces just bigger than the hole. Put one on front and one on back to cover hole. I work in a cabinet shop and sawdust was constantly getting in, so this solved my issue. I'm not sure, but the FP scanner might still work with it covered like that, not tried it yet to see. Other than that, that Tudia case is great, looks good and offers excellent drop protection. I know first hand, dropped phone from 3 foot up on concrete floor.

westentertainer said:
in the bin i hope.
Click to expand...
Click to collapse
Nah, I found it today. I might put it back on.
I just have a standard silicone case right now. The Thor case isn't practical. It's really just for show.

Some pics I took. I it messes with your reception though lmao.

kenboyles72 said:
OnePlus 3 Case - TUDIA Ultra Tough OMNIX [Heavy Duty] Hybrid [Full-body] Protective Case, best case imo
https://www.amazon.com/OnePlus-Case...=1-1-spons&keywords=tudia+case+oneplus+3&th=1
Click to expand...
Click to collapse
I confirm got a TUDIA slightly different model for my 3 and for like $8-9 (us.) couldn't be happier fits over D-brand zkins with no issues also

thin cover

hi guys, I have a problem to use covers, as I have small hands the normal covers increase the width in the phone, so it is more difficult to use it with one hand, there is a cover with very thin edges that is reliable and compatible with the film whitstone?
I like very much pitaka cover but can't see carbon design, l'm loooking for some similar cover.

http://r.ebay.com/WdHOkZ
Here's mine... I have black and blue versions. Bought many different low cost cases, and some more expensive ones like spiegen for example, but keep coming back to this one as it adds minimum bulk and keeps the original feel of the phone. Plus the stand is magnetic and comes really handy.

Spigen thin fit... top
Sent from my SM-N950F using Tapatalk

rlrmineiro said:
http://r.ebay.com/WdHOkZ
Here's mine... I have black and blue versions. Bought many different low cost cases, and some more expensive ones like spiegen for example, but keep coming back to this one as it adds minimum bulk and keeps the original feel of the phone. Plus the stand is magnetic and comes really handy.
Click to expand...
Click to collapse
Thamks but as i said before, i don't like that carbon frame.
vojopd said:
Spigen thin fit... top
Sent from my SM-N950F using Tapatalk
Click to expand...
Click to collapse
I thank you, I know this cover but I'm afraid the edge is not as thin as I want and has a certain thickness of at least 2mm, do you agree? if not how often is it accurate?

babak said:
hi guys, I have a problem to use covers, as I have small hands the normal covers increase the width in the phone, so it is more difficult to use it with one hand, there is a cover with very thin edges that is reliable and compatible with the film whitstone?
I like very much pitaka cover but can't see carbon design, l'm loooking for some similar cover.
Click to expand...
Click to collapse
I can totally understand u need...
I have few of them...
Spigen is thin but not thin enough...
The best I found is Samsung thin case... It's the thinned u will get... But very slippery
Baseus makes something very similar.. Nice colors and slippery again...
What I have done now is I have put a clear slickwrap back of device on the cases to make it Less slippery...
Here are some pics if the Baseus case...
I can post links /pics of the other ones when I get home.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Techvir said:
I can totally understand u need...
I have few of them...
Spigen is thin but not thin enough...
The best I found is Samsung thin case... It's the thinned u will get... But very slippery
Baseus makes something very similar.. Nice colors and slippery again...
What I have done now is I have put a clear slickwrap back of device on the cases to make it Less slippery...
Here are some pics if the Baseus case...
I can post links /pics of the other ones when I get home. View attachment 4444506View attachment 4444507
Click to expand...
Click to collapse
thank you very much this cover is very nice, I hope also protective, waiting for the link.

check this out, it's very slim, almost zero bulk
https://www.aliexpress.com/item/FLO...32834345473.html?spm=a2g0s.9042311.0.0.nkN04b

How about original Samsung cover? Not sure how it goes with Whitestone, but I've been using this for about 5 months and there's no going back. Ps. I'ts only 0.95mm thick.
https://www.samsung.com/us/mobile/m...note8-protective-cover--black-ef-qn950cbegus/

this is a very thin case too
im using it
so far very satisfied
do note if you own the midnight black note 8 and if you order the transparent black, it will not be a fully black case.. the logo will not be visible as how its advertised (but im okay with that. does still look nice)
https://mnmlcase.com/products/samsung-galaxy-note-8

Lol i didnt measure is it 1 or 2 mm. But spigen thin fit is the best.
Sent from my SM-N950F using Tapatalk

Thanks guys, I'm very confused now, it's a very difficult choice considering also that I have the whitstone tempered glass.
I remain of the idea that pitaka is the most serious and the most subtle but also the ugliest with that carbon frame, I do not know, I'm really confused.

babak said:
Thanks guys, I'm very confused now, it's a very difficult choice considering also that I have the whitstone tempered glass.
I remain of the idea that pitaka is the most serious and the most subtle but also the ugliest with that carbon frame, I do not know, I'm really confused.
Click to expand...
Click to collapse
MNML as posted few posts back
its compatible with whitestone as im using it