Hi there,
Any suggestions on how to enable slideit keyboard? Everytime I go into settings and push "keyboard" it goes straight back to home screen.... any help would be greatly appreciated!
Thank you
Sent from my Super NC using Tapatalk
Did you copy the .apk into apps and install it? Try uninstalling and reinstalling it afterward, then selecting it from NookTools.
U have to use nookcolor tools
Nook Color via Xda App
I had a similar problem and found out that the keyboard apk file has to be in the system/apps folder but usually gets installed into data/apps.
If that's the problem, you can move it with adb or buy Root Explorer which makes it much easier.
Mobileread forum for the color nook (developer's corner) has a thread entitled
"How to get Gingerbread keyboard?"
I can't post the link directly because I'm new to this forum.
Thanks guys, I'll try that!
sent from my super rooted NC via tapatalk
I have gotten all the custom keyboards I tried, working perfectly. Presently using SwiftKey. You just need to move the apk file to system/apps, set the permissions similar to other apks in the folder and then install that apk from there. After that you need to reboot, otherwise the keyboard won't show up on Nook Color Tools. After booting, open NC Tools and change the keyboard.
Invisman said:
I have gotten all the custom keyboards I tried, working perfectly. Presently using SwiftKey. You just need to move the apk file to system/apps, set the permissions similar to other apks in the folder and then install that apk from there. After that you need to reboot, otherwise the keyboard won't show up on Nook Color Tools. After booting, open NC Tools and change the keyboard.
Click to expand...
Click to collapse
were you able to get the word suggestion to work with swiftkey? I installed and chose it as my keyboard in nookcolor tools, but the word suggestion doesn't work.
Related
How do I manully insatall swype on this captivate vibrant Tom?
Sent from my SAMSUNG-SGH-I897 using XDA App
You grab the swipe file from: system/libs/libSwypeCore and the file from: system/apps/Swype.apk and put them on your SD card.
I can't post them it's illigal and against forum rules, but you can pull them off any stock rom with Root Explorer. To install them just put the 2 files back in their original spots after you do the Vibrant hybrid install.
Hi guys,
I just installed JH3+SRE+Lagfix and my Swype is broken, I have Samsung Keyboard and Android Keyboard as well as Swype as options in the settings, both work fine but Swype is "dead", I see it but I can't interact with it, I touch and nothing happens lol
Is there a way to fix this or do I have to reinstall Swype, if so, how?
Many thanks
After much google searching, and searching here on XDA, I'm at a loss. I have the Allshare.apk and .odex, however I have had no luck installing them. I've tried various suggesions, including pushing them from adb shell, and nothing seems to work.
I would love to continue using custom roms, but not having Allshare is a big reason for me to just use rooted stock. The rom I'm trying to install it on is Cognition Beta (Froyo).
Titanium Backup also doesn't work for this. It tells me that it backed up Allshare, but when I try to install it, the restore button doesn't even show up.
Also, a quick question for Rom Manager. With the rom backup feature, can you only restore a backup for the rom you are using? (i.e if you want to restore a backup for another rom, you have to flash the rom first, then restore?)
Although posted in the wrong forum... I'd also like an answer to this. Running CDE and would really like to have AllShare to stream movies off my media server.
Sent from my SAMSUNG-SGH-I897 using XDA App
sdotbrucato said:
Although posted in the wrong forum... I'd also like an answer to this. Running CDE and would really like to have AllShare to stream movies off my media server.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Not sure why this would be the wrong forum. I'm using a Captivate, and trying to install Allshare on a Captivate rom.
use root explorer and add them to System/app and paste both files there.
reboot your device, and voila
mendez91 said:
use root explorer and add them to System/app and paste both files there.
reboot your device, and voila
Click to expand...
Click to collapse
Seriously? It's that freakin simple?
yup
try it,
and let me know the results lol
mendez91 said:
yup
try it,
and let me know the results lol
Click to expand...
Click to collapse
Still at square one. Altho the .apk and .odex are now in system/apps, it didn't affect anything. Also, looked up root explorer, and how to use it, then downloaded it. It won't remount my main file system as read only...so it's permanently in r/w now.
Also tried flashing to killer23d's rom, to use titanium backup on the allshare he has in his rom, still wouldn't work.
So....clueless at this point.
jrphoenix77 said:
Still at square one. Altho the .apk and .odex are now in system/apps, it didn't affect anything. Also, looked up root explorer, and how to use it, then downloaded it. It won't remount my main file system as read only...so it's permanently in r/w now.
Also tried flashing to killer23d's rom, to use titanium backup on the allshare he has in his rom, still wouldn't work.
So....clueless at this point.
Click to expand...
Click to collapse
At one point, I had this same problem, and the only solution there is, is to reflash the rom. It's a PITA, I know. And don't worry about what your filesystem is mounted as in Root Explorer. After every reboot it reverts to read only again.
miztaken1312 said:
At one point, I had this same problem, and the only solution there is, is to reflash the rom. It's a PITA, I know. And don't worry about what your filesystem is mounted as in Root Explorer. After every reboot it reverts to read only again.
Click to expand...
Click to collapse
Unfortunately that doesn't seem to be my case. Even after reflashing Cognition, my file system is still R/W. Didn't even have to hit the white button on root explorer to paste files into system/app.
Also, adding dlna.apk and dlna.odex into system/app still isn't giving me Allshare.
Edit: Well, I've found a better solution. I'm gonna go with Killer23d's rom...looks alot more like stock Froyo, is based on the I9000, has Allshare, AND Mobile AP. Both features that I wanted.
Thanks for trying guys. If anyone does come up with a solution tho, please feel free to use this thread, as searching for allshare.apk on google results in this thread being either the 2nd or 3rd search result (can't remember).
Works for me.
I just put AllShare back in, using the attached file, and it's working fine.
I'm running Cognition 2.2 Beta 9.1.3 and put the file into "system\app" using Root Explorer.
I also changed the permissions of the file and selected just the following:
USER = READ + WRITE
GROUP = READ
OTHERS = READ
Remove any other checked permissions.
In case you don't know how to get into the permissions, just long-press the file, from within Root Explorer, and choose "Permissions" from the list that pops up.
Don't forget to reboot right after.
Your issue is most likely because you are trying to reintegrate an odex'ed AllShare while you are using a de-odex'ed ROM. Ozone777's file looks to be about the correct size for a de-odex'ed AllShare. Just move it into the /system/app folder with root explorer as mentioned above and you should be good to go.
I used terminal to drop the APK attached in the previous post into /system/app and it works beautifully. CogYo 2.2.9
Sent from my SAMSUNG-SGH-I897 using XDA App
Thank you ozone777
The one app that I really wanted back from the stock load!! thank you!!! Worked perfectly on Cognition v2.2 BETA9.1.3
allshare installed
This forum is awesome, I was able to put back allshare and it is working like a champ.
Thanks guys.
Moved to Q&A.
ozone777 said:
I just put AllShare back in, using the attached file, and it's working fine.
I'm running Cognition 2.2 Beta 9.1.3 and put the file into "system\app" using Root Explorer.
I also changed the permissions of the file and selected just the following:
USER = READ + WRITE
GROUP = READ
OTHERS = READ
Remove any other checked permissions.
In case you don't know how to get into the permissions, just long-press the file, from within Root Explorer, and choose "Permissions" from the list that pops up.
Don't forget to reboot right after.
Click to expand...
Click to collapse
Didn't work on Assonance (Froyo).
Errors with: "Application not installed".
Any tips?
i would try to reinstall this file.
ozone777 said:
I just put AllShare back in, using the attached file, and it's working fine.
I'm running Cognition 2.2 Beta 9.1.3 and put the file into "system\app" using Root Explorer.
I also changed the permissions of the file and selected just the following:
USER = READ + WRITE
GROUP = READ
OTHERS = READ
Remove any other checked permissions.
In case you don't know how to get into the permissions, just long-press the file, from within Root Explorer, and choose "Permissions" from the list that pops up.
Don't forget to reboot right after.
Click to expand...
Click to collapse
I am getting this error message. What gives? (BTW, that's on my Bell Galaxy S I9000M with seeAMRS JL2 ROM)
The application AllShare (process com.sec.android.app.dlna) has stopped unexpectedly. Please try again.
Ahhhh you guys rock worked perfect for me as well!!!
Will not work on Cappy running CyanogenMod 7 Nightly. I dont know if this matters.
Baseband T959TLJL3
Kernel 2.6.35.7-gba356bo [email protected]#1
Build GRJ22
Hello All!
So I have a nook color 1.1.0 rooted with AutoNooter 3.0 and everything is running fine thus far.
However, what I'm currently trying to do is install SlideIt keyboard which did install and I see the .apk file in the /data/app folder using root explorer but when I attempt to copy and paste the SlideIT .apk file into the /System/App folder on my nook it tells me that in cannot do it as the file system is READ only.
I was under the assumption that just by using Root Explorer that it would allow me to to write files to the /System/App directory but it appears this isn't the case.
Am I doing something wrong? or am I missing something?
Any help would be greatly appreciated!
Thanks.
There's a little button at the top of the UI that says "Mount R/W". Press it.
Thanks that did the trick! LOL.. Obviously I missed that little detail... Now if I can only figure out how to activate SlideIT.
Has anyone had any issues activating SlideIT with their activation code? I enter my activation code and it says "Activation Failed" for some reason. My nook does have an active internet connection so I don't think thats the issue.
Thanks.
After moving the apk from /Data/App to /System/App and changing the permissions per other instructions, install it using Root Explorer.
Next, open NookColor Tools to choose your keyboard. The last step is to reboot.
HTH
RickOSidhe said:
After moving the apk from /Data/App to /System/App and changing the permissions per other instructions, install it using Root Explorer.
Next, open NookColor Tools to choose your keyboard. The last step is to reboot.
HTH
Click to expand...
Click to collapse
Please disregard. It's pretty obvious that I misread your last post.
I'm having an issue as well the button lights up when pressed however it won't change from read only any solutions?
Sent from my Vanilla Tazz using XDA App
Just as an update on my issue with SlideIT activation. I was finally able to activate the product with the validation key but it took 24 hours or so for it register successfully.
I have no idea why it took that long to accept the activation key but the keyboard is now working correctly.
1. Change input method to any other keyboard.
2. In the /system/app folder, delete Swype.apk
3. In the /system/lib folder, delete libSwypeCore.so
4. In the /data/data folder, delete the com.swype.xxx folder
5. In the /data/dalvik-cache folder, delete the [email protected]@swype.... file.
6. REBOOT OR IT WON't INSTALL PROPERLY
7. Install and run the swype beta installer and follow the on-screen instructions. Installer link here http://db.tt/cD8HXlI
You also can rename the files to .xx.bak so you have a backup. This works 100% for me on Com Rom 2 after just installing today so I don't know how this will work on systems that have been used daily for a while.
I take no part if none of this works and permanently deletes swype from your phone. Your own fault.
Credit to google leading to this post by Snow02 on droid x forums
What exactly is it?
Sent from my SCH-I500 using XDA Premium App
A keyboard
Sent from my SCH-I500 using XDA Premium App
Its the newest version of swype. I was running it when I was using JTs CM7 but I thought it was worse then our TW swype.
Sent from my SCH-I500 using Tapatalk
representingcochran said:
Its the newest version of swype. I was running it when I was using JTs CM7 but I thought it was worse then our TW swype.
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
How is it worse?
Its not I just swyped this from 3.0 I personally think its better I didn't make a single mistake while writing this when I usually do with older versions.
Sent from my SCH-I500 using Tapatalk
tonu42 said:
Its not I just swyped this from 3.0 I personally think its better I didn't make a single mistake while writing this when I usually do with older versions.
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
I completely agree with you, its a complete improvement from the last version. The word suggestion window is gone and moved to a frame above the keyboard, word prediction is way more accurate, swyping is more accurate, etc.
I'm a big swype user, so thanks for the instructions...may give this a whirl.
Where can I find the swype beta installer?
Sent from my SCH-I500 using XDA Premium App
http://beta.swype.com
The biggest change (other than tablet support) with Swype 3 isn't even the much improved suggestion window or the faster and more accurate swiping: it's that Swype now does predictive tapping too.
No more need to switch between Swype and the stock keyboard or SwiftKey if you aren't in a swiping mood. That's why their tagline for 3.0 is - and I'm not making this up, just watch their promo videos - "Stroke it AND poke it."
So what color is the new swype?
Edit: My sywpe expired so im being forced to update. Instructions worked perfectly thnx.
Thanks for the instructions. Worked perfectly. Now to get used to the slightly different interface...
Thanks for putting this little tutorial out there cuz after updating to UKB2.1 the swype keyboard stopped working
I admit I might not the most brainy person when it comes to this
Had a heck of a time figuring out how to remove those system files... finally resorted to Root Explorer (paid app) to remove these files (I am sure there was a way to do it without, but I refer you to the above comment)
For some reason the swype beta likes to be authenticated twice...
and after the second authentication process, I made sure to reboot before using the keyboard...
so far it is working and I like the new keyboard... (I had better since it would take me another whole afternoon to figure out how to install the old swype keyboard)
thanks again and keep up the good work
jabberjaw said:
Thanks for putting this little tutorial out there
Click to expand...
Click to collapse
+ 1 - thanks button was hit
jabberjaw said:
Had a heck of a time figuring out how to remove those system files... finally resorted to Root Explorer (paid app) to remove these files (I am sure there was a way to do it without, but I refer you to the above comment)
Click to expand...
Click to collapse
Glad you got it worked out, but wanted to let you know not to feel bad about going to root explorer. You will likely find that you have a lot of uses for it - there is a LOT that goes on round here that having root explorer makes life a lot easier to follow...
Enjoy!
I just updated to 2.1 and my swype crapped out on me too. I've tried everything to get it working, but nothing works.
I've been trying to delete the swype.apk and other files instructed here, but they won't delete. 'don't have permission," "read only" or "Cannot Delete." I'm using Root Explorer too, and trying to switch Mount r/o to r/w, and it won't change! Someone help me! I'm going through Swype withdrawls already!
What program is everyone using to locate and delete files?
BTW, I've switched keyboards before I try to delete, still no luck.
neotrixy,
i remember having similar difficulty
try changing [mount r/o] button before you select the app you want to delete,
couldn't find a another protected system app to delete to try this again, but I was able to switch the mount button back and forth by pressing the grey button at the top of the screen
hope this helps
ps- i did find that someone posted a swype fix in the UKB thread (not sure if it works)... it is way back in the thread... but i had already switched to beta before i found it
No, i think already mentioned, for whatever reason, the button won't change to r/w. It's stuck on r/o. I don't know what the problem is, I've never had a problem like this before.
Thanks for the help though!
Any other ideas?
I think i got it fixed...I downloaded a newer version of Root Explorer, and it let me change the r/w.
Thanks guys!
ok,
It sounds like your Root Explorer program has not been granted superuser permissions yet.
I can't remember when it asked for those permissions, check in your superuser icon to see if Root Explorer is listed in there and has a green circle next to it.
I have been looking in looking around in the Root Explorer menus but don't see anything
I hope it is as easy as clicking the allow button in superuser, if not my other thought would be to uninstall and reinstall Root Explorer to see if it will ask for superuser permissions when you open it up.
good luck
Yes
Thanks for your help. I was so frustrated with Verizon having made that (or so they thought) permanent. That is so stupid they want their people stuck with an old version. Appreciate all your help. God bless in Jesus' Name.
So I somewhat got Wiiremote support on the Vivid. I extracted the Bluetooth.apk from a Cyanogenmod rom.
1.) you need to have a odexed rom (I used rumraider b3)
2.) install the attached file by putting it in /System/app (i put it on my sd card and used root explorer)
3.) install Bluez IME and the HID addon (google it )
4.) follow the IME's instuctions and select Wiimote (HID) for the device.
known problems:
lights continue to blink, it's connected and won't turn off but the lights blink instead of show the 1
use at your own risk, this worked for me, no one else has tested it. Let me know how it works for you
Sry if this is off topic ,will this work for ps3axis controller
Sent from my HTC PH39100 using Tapatalk
i'm not sure you can try? i don't see why it wouldn't.
The HTC Sense bluetooth apk is the "roadblock" for pairing the remotes. swapping it out should solve problems for all the pairing problems.
You know, I never would have thought of trying this on my own. I've got a bluetooth device that won't sync properly with anything stock on the vivid but I had GB ROM that I think used the telstra bluetooth stack that worked perfectly. Since going to ICS it had stopped working again but after reading this post I decided to pull the Bluetooth.apk off that old ROM and it works perfectly again.
Thanks for the tip.
Is this possible on the new stock ATT ICS rom? How can I backup or get the original installer for bluetooth on this rom? Thank you.
Rictamilk said:
Is this possible on the new stock ATT ICS rom? How can I backup or get the original installer for bluetooth on this rom? Thank you.
Click to expand...
Click to collapse
You can use a file browsing app like Root Explorer.
The Bluetooth.apk will be in system/apps. Mount system to R/W
move the original file to your sdcard somewhere.
And take the one posted in op's post up above.
And paste and install it in system/apps.
You need root permissions to do this though. Good luck.
Sent from my HTC Vivid.
haggardh said:
You can use a file browsing app like Root Explorer.
The Bluetooth.apk will be in system/apps. Mount system to R/W
move the original file to your sdcard somewhere.
And take the one posted in op's post up above.
And paste and install it in system/apps.
You need root permissions to do this though. Good luck.
Sent from my HTC Vivid.
Click to expand...
Click to collapse
It looked like I was able to just open the apk file posted and install it. Do you think this is possible? I didn't want to screw up my phone if I didn't have the original to replace it. Thanks.
Rictamilk said:
It looked like I was able to just open the apk file posted and install it. Do you think this is possible? I didn't want to screw up my phone if I didn't have the original to replace it. Thanks.
Click to expand...
Click to collapse
it has to be put in the system apps folder because that's where the phone looks for the bluetooth support. also it needs some elevated permissions and isn't made to comply with superuser.
you can make a backup just in case
Had it sync fine the first time I tried it, and then my dad called and my screen off profile was too low so my phone restarted lol. Now I can't get it to sync again! When I Activate Bluetooth with Bluez IME selected I get a "pairing request," and if I choose it from the notification menu it says to enter a PIN on the phone and device (which I can't because you can't enter a PIN on the wiimote, plus the IME isn't touch input anymore).
My steps:
Activate Bluetooth
Scan for devices - Nintendo RVL-CNT-01
Select Device Driver - Wiimote (HID)
Select IME - Bluez IME
Anddd the wiimote just times out. Any insight?
try uninstalling the apk that you installed via installer (not dropping in system/app) if you haven't already
then maybe try reinstalling bluez IME?
i wish i could be more help!
Keep getting a "Disconnected: Software Interference" Are there limitations on a per-app basis as far as functionality is concerned?