Database Develop

Wifi Tether for Root Users - 3G ok but no Wifi

First off, I have tried searching for this issue, but haven't had any luck, so I thought I would give this new thread a go.
I am trying to connect via my G1's (ok Rogers Dream to be more specific) wifi internet connection but having no luck. It was working once upon a time, I guess a few variables have changed, mainly my flashing between many different ROMs. Either case I have noticed this issue only recently, on a HERO Rom, and Cyan 4.0.1.
I am able to tether through my Phone Data Plan (3G), no issues. But for Wifi, as soon as I click "Start", my phone turns off my wifi and auto. turns on 3G.
Anyone have any ideas? My last resort is to due a full restore on my phone, I was hoping there is a more simple solution. Also, I have uninstalled/reinstalled the app.
Thanks

Bedeadu said:
First off, I have tried searching for this issue, but haven't had any luck, so I thought I would give this new thread a go.
I am trying to connect via my G1's (ok Rogers Dream to be more specific) wifi internet connection but having no luck. It was working once upon a time, I guess a few variables have changed, mainly my flashing between many different ROMs. Either case I have noticed this issue only recently, on a HERO Rom, and Cyan 4.0.1.
I am able to tether through my Phone Data Plan (3G), no issues. But for Wifi, as soon as I click "Start", my phone turns off my wifi and auto. turns on 3G.
Anyone have any ideas? My last resort is to due a full restore on my phone, I was hoping there is a more simple solution. Also, I have uninstalled/reinstalled the app.
Thanks
Click to expand...
Click to collapse
Did you restart the phone? This happens every now and then, and a restart will fix it.

Hey, I had to apk's fo rthis the signed_andtether_1_52-pre2.apk did not work. The file labeled Signed_andtetehr_1_52.apk works everytime.

Bedeadu said:
First off, I have tried searching for this issue, but haven't had any luck, so I thought I would give this new thread a go.
I am trying to connect via my G1's (ok Rogers Dream to be more specific) wifi internet connection but having no luck. It was working once upon a time, I guess a few variables have changed, mainly my flashing between many different ROMs. Either case I have noticed this issue only recently, on a HERO Rom, and Cyan 4.0.1.
I am able to tether through my Phone Data Plan (3G), no issues. But for Wifi, as soon as I click "Start", my phone turns off my wifi and auto. turns on 3G.
Anyone have any ideas? My last resort is to due a full restore on my phone, I was hoping there is a more simple solution. Also, I have uninstalled/reinstalled the app.
Thanks
Click to expand...
Click to collapse
Wait, wait, wait.
You have a Wireless Connection available, why are you tethering your G1? Can't your laptop just pick up the wireless connection? I am confused.

Stigy said:
Wait, wait, wait.
You have a Wireless Connection available, why are you tethering your G1? Can't your laptop just pick up the wireless connection? I am confused.
Click to expand...
Click to collapse
Exactly. lol. Well what the program does is disable your wifi so you can tether using your data connection. Thats the purpose of the program. So from the way you presented your information, you want to tether using your phones wifi connection to access the wifi router from your laptop?

Well, if your laptop (or other device) only has bluetooth, you can use Wireless Tethering for Root Users to share the phone's WIFI connection over the bluetooth connection. If that is what you are trying to accomplish.... not sure.

Stigy said:
Wait, wait, wait.
You have a Wireless Connection available, why are you tethering your G1? Can't your laptop just pick up the wireless connection? I am confused.
Click to expand...
Click to collapse
Haha, busted. Ok, well I don't necessarily need to go through my Wifi of my phone, because yes I have it on my laptop. I just know it used to work, now it doesn't.
Secondly, to the suggestion of rebooting my phone, well I would assume that installing a new ROM would constitute a reboot. Also reinstalling the apk would probably do the same, still though, nothing fixed it.
Sometimes my depending where I am in my house I put my phone halfway between my router and my laptop to strengthen my laptop signal, so, using it as an access point.

Wifi no longer working with paul's froyo [FIXED]

anyone else having the problem of wifi no longer connecting after updating TO froyo?
edit:
Okay just had coworker enable his nexus as a hotspot and I connected fine.
Must have something to do with the phone's wifi driver and home router.

Wifi still good for me.

Re: Wifi no longer working with paul's froyo
I see a bunch of people reporting alot of bugs in Froyo, i havent seen any bugs yet. My answer to OP is: No.
-------------------------------------
Sent via the XDA Tapatalk App

i can't get wifi to work on any froyo!
it's just obtaining the ip adress but not connecting

i'm having the same problem on my phone. i flashed the stock rom update-nexusone-EPF21B-signed, the the frf 50 rom and everything was working fine for a few hours then suddenly it stopped working. now when i try to turn on my wifi, it just scans then says it's disconnected then starts scanning again.

everything is working fine but i just can't get any wifi! :'(

Okay, glad I'm not the only one. Wonder how we can go back to older wi-fi drivers.

WebghostDK said:
I see a bunch of people reporting alot of bugs in Froyo, i havent seen any bugs yet. My answer to OP is: No.
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
This, I think there's a lot of operator errors going on that are being blamed on FroYo

TFJ4 said:
This, I think there's a lot of operator errors going on that are being blamed on FroYo
Click to expand...
Click to collapse
Hey if you got any ideas on what I did wrong, I'm all ears. All I know is wifi worked fine before switching to Froyo.
(but the new wi fi drivers didn't work on 2.1 either and i had to go back to the old ones)

Re: Wifi no longer working with paul's froyo
Mine disconnects after a while of not using the phone. Wifi on profile widget stays on. But in wifi settings it shows not in range which shouldn't happen anywheree in my apartment.
Need to turn off and turn onwifi again to reconnect.
-------------------------------------
Sent via the XDA Tapatalk App

tanman1975 said:
Hey if you got any ideas on what I did wrong, I'm all ears. All I know is wifi worked fine before switching to Froyo.
(but the new wi fi drivers didn't work on 2.1 either and i had to go back to the old ones)
Click to expand...
Click to collapse
if more than one person is having a problem, i'm certain it's not a user error like one person said it could be (quite an asinine comment if you ask me). it's never an operator error when you turn off your wifi and half an hour later you try to turn it on only to discover it won't turn on.....how the hell is that an operator error?

i didn't have any problems whatsoever. check the md5 hash, make sure your download was fine.
make sure you wipe everything, then reinstall. if you have old data cache'd, and then tried to flash the update, that may very well be the problem.

Yeah, having troubles connecting to 802.1x EAP Wireless Networks, PSK works fine for me at home.
Yes, I wiped, checked MD5 etc..
I'm using Pauls Rooted Froyo zip

i made sure to wipe data/cache/dalvik cache/battery and rotation. i do this everytime i switch roms. after 12 hrs of working fine, i just don't understand why it suddenly quit. before i flashed to froyo, i made sure to read up as much as possible to ensure i didn't miss a step. the worst part is, no matter which rom i'm using now, i have no wifi.

one thing i noticed is pre-froyo, when i flashed pershoot's kernels with new WiFi drivers i could not connect at home, but when i used kernels with older drivers, I was fine. That said, maybe it will work with other WiFi access points a la the point made about not working with certain WiFi router types. Will test when I have the opportunity.

one thing i noticed is pre-froyo, when i flashed pershoot's kernels with new WiFi drivers i could not connect at home, but when i used kernels with older drivers, I was fine. That said, maybe it will work with other WiFi access points a la the point made about not working with certain WiFi router types. Will test when I have the opportunity.
----------
edit:
Okay just had coworker enable his nexus as a hotspot and connected fine.
Must have something to do with the phone's wifi driver and home router.

I had problems connecting to my router (a Belkin N1). I set a static IP on the Nexus One and then it works perfectly.
I have tried to connect to my work router and it got a DHCP lease fine and worked fine (only at 54Mbps G speeds).
Perhaps this new radio image has N enabled and something is screwing up with the DHCP lease. I will try to replace my home router with another N router and report back.

I had the same problem with a message saying connecting but not picking up the IP address.
I suspect it was a conflict with the Static WiFi app I was using. I've unloaded this and after restarting and re-saving the static ip details it connected up OK.
For now I'll have to switch between static and dhcp manually I guess....

I came from Desire R19. My wifi doesn't connect as well now, i.e. seems to need a stronger signal from the AP. Last week I was getting 2 bars of wifi for the AP in my office, and now I get 1 or none. I'm getting a bar or two less at home too. I'm guessing some kind of difference in the Radio.

WiFi issue I have seems to be AP manufacturer specific
At home
Pre 2.2 I could connect without problem to my Linksys WRT 600N, no problems, DHCP etc.
Post 2.2 I cannot connect, gets to acquiring address and then craps out and re-scans
At work
Cisco wireless kit, (no idea of type of AP) pre 2.2 connected OK, post 2.2 connects OK
WPA2 security on both setups

WIFI disables after going to sleep.

My nook is rooted via autonooter, I have ADB working properly, and I have used the commands to add AD HOC networks to be viewed by the NC. Since then my WIFI drops out, and i must turn it off, the back on to work properly. Otherwise it can't recognize ANY networks at all. Does anyone else have this problem? If so is there a fix.

IIDeCiMuSII said:
My nook is rooted via autonooter, I have ADB working properly, and I have used the commands to add AD HOC networks to be viewed by the NC. Since then my WIFI drops out, and i must turn it off, the back on to work properly. Otherwise it can't recognize ANY networks at all. Does anyone else have this problem? If so is there a fix.
Click to expand...
Click to collapse
Mine shows all the networks but occasionally wont let me connect even when other devices are connecting just fine. Worked on my home network and then stopped. Changed my security protocol on my router and it worked but now Im not getting connections again. Works on my captivates mobile AP though no prob.

I have had similar issues on occasion. I am experimenting with an app called wifi manager. You can control the networks that the nook scans when it wakes up. I think most of my problem is the lengthy scan that mine goes through (9 or 10) network options and appears to maybe time out when waking. Like I said I have only used this a couple of hours but it seems to allow the nook to connect quicker than before, within 15 seconds. May give it a try, free on the market.

[Q] CM7 nightly Wifi issue. Unable to connect.

I am having a wifi connection issue with CM7 nightly build 14&15. When i try to connect to my wifi it allows me to type in my passcode then proceeds to attempt the connection. It appears to be caught in a loop or something. Under wifi connection it shows scanning, connecting, then disconnected then it repeats. Wifi works fine under stock unrooted, rooted and nookie froyo SD. Does anyone else have this issue? I cannot post to android development yet. Thanks in advance.

I have a clean flashed 15 right now, and wifi is working stellar. Did you by chance not format cache/data, and still have a bunch of saved hotspots in wireless? I know a fix earlier was to "forget" all the saved wifi hotspots, and resave them.

Same problem I have been experiencing among others. It seems like if your router is using WPA you will have problems connecting. Switching to a different security encryption or wiping all remembered access points seem to be the only solution that I know of.

Yes, I formated system, data and cache when installing. CM7 works great on my Evo 4g, strange. I tried forgetting the hotspot and received the same error. Will try an unencrypted hotspot and will report back. Don't really understand why I am having this issues and others aren't. Thanks for the replies.
Sent from my PC36100 using XDA App

I've seen like 6 other people with this problem its not just you.

I'm experiencing the same problem of Wifi flashing on and off when I try to connect to a WPA encrypted router. Will try to Forget saved networks and see if that solves the problem. I'm running phiremod's version of CM7.

Mallinj. Same issue here with phiremod. Forgetting did not work for me. Let me know what happens for you. Thanks.
Sent from my PC36100 using XDA App

Guys check out my thread. I was having the same wifi loop problem.
It's [Problem 1]
http://forum.xda-developers.com/showthread.php?t=988802

I had the same issue toggling airplane mode on and off fixed the issue for me however the little airplane icon stayed for a while then just disappeared after a reboot
Sent from my Ginger Tazz using XDA App

That wifi file is named nookie froyo. This definitely works for cm7?
Usually what I have to do is some voodoo with toggling airplane on, then let wifi loop for about five minutes before it finally connects.

Been having this issue as well, what I have been doing when it has been switching on/off in the Wifi Settings is hitting Menu > Advanced settings and waiting a few seconds and it usually connects just fine.

cabbieBot said:
That wifi file is named nookie froyo. This definitely works for cm7?
Usually what I have to do is some voodoo with toggling airplane on, then let wifi loop for about five minutes before it finally connects.
Click to expand...
Click to collapse
Yeah it works. It takes the working wifi file from nookie froyo and pushes it to your CM7 file.

Has anyone submitted a bug report with cyanogen yet?
Sent from my PC36100 using XDA App

ChickenGod said:
Yeah it works. It takes the working wifi file from nookie froyo and pushes it to your CM7 file.
Click to expand...
Click to collapse
I am really hoping I don't start having this problem. The nookie froyo wpa_supplicant file for me was never connecting to ad-hoc, and right now I am connecting to anything.
Send from my Palm VII using courage

sigma0824 said:
I am having a wifi connection issue with CM7 nightly build 14&15. When i try to connect to my wifi it allows me to type in my passcode then proceeds to attempt the connection. It appears to be caught in a loop or something. Under wifi connection it shows scanning, connecting, then disconnected then it repeats. Wifi works fine under stock unrooted, rooted and nookie froyo SD. Does anyone else have this issue? I cannot post to android development yet. Thanks in advance.
Click to expand...
Click to collapse
I had this same problem yesterday morning. What I had to do was forget my network's settings, turn off wifi, then go turn off my router, turn the Nook's wifi back on, let it sit for a few seconds, turn my router back on, then try to connect. Strange as it sounds, this actually worked.

Time pilot aka, Thanks for the tip! Will try it later today.
Sent from my PC36100 using XDA App

Finally
I was able to solve my connection loop issues. I tested WPA and WEP on my D-Link Wireless N router DIR-615 with no success. Tried toggling on and off with airplane mode. Tried forgetting my router, turning things on and off at different sequences and intervals.
Then I set my router to B&G only. Basically turning wireless N off and it worked like a charm. I am able to connect using any encryption method. So from my experimenting it was the wireless N protocol that was the issue.
For people out there with issues and want to keep their wireless router encrypted try turning wireless N off. Worked for me.
Thanks everyone for their input.

Wifi suddenly doesn't work anymore

I'm new to Android and was attempting to root the phone last night. I got the recovery installed but had to sleep before I had the chance to finish the root. I left for work this morning and my 3G was all fine but when I came back home the wifi had stopped working completely. It registers as connected and shows full bars of signal but every app just states that there is no connection.
Could this have something to do with the root (which I completed on 3G just now)? It seems strange that it just cut out from one day to the next.

Root has nothing to do with wifi . this would have happened even if you were not rooted

So is there anything I can do to fix this issue? It's only the phone that can't connect to the wifi

The Inquisition said:
So is there anything I can do to fix this issue? It's only the phone that can't connect to the wifi
Click to expand...
Click to collapse
tried reeboting? re-enter the password and try maybe? or reset your router

jags_the1 said:
tried reeboting? re-enter the password and try maybe? or reset your router
Click to expand...
Click to collapse
I tried all of those to no avail but I just tried to reset my router again and that seemed to have fixed the problem. Weird. Thanks though :good: