I bought this car mount a few weeks ago and have been very impressed with it, even in my old suzuki 4x4 which rattles like a can there is no vibration with the mount.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=380292361164#ht_3536wt_1158
However, I have just noticed where the clip hooks the phone at the top, there is that much tension in it, well it has started to lift the top part of the phone away
So I'm going to try heating it up a bit and pulling the tab back a bit so it reduces the tension.
Something for others to watch out for!
Cheers
Todd
For those that have a defender case and want a car mount there are Rocketfish and Bracketron mounts that have the same attachment.
Google shopping results - for rocketfish
Google Results - for Bracketron mounts
These will work with the Dell car mount bracket or the clip on the Defender case.
Interesting feed back Todd, thanks. I was just about to order on.
Hopefully you can answer a question for me then. I was looking at getting one with the belt clip as well, Would the holder for the streak be sufficient that I could just get the one holder and swap this to the belt clip and then back to the windscreen holder? or would I need two holders and swap the Streak between the 2?
Thanks in advance.
Stuart
Can't really answer your question on that Stuart as I do not have a belt clip as well.
If it helps I can take a photo of the holder if you like.
I've got one of these and have not had the same issue.
I've been using mine for about 6 months now and the phone is still perfect?....
Lucky you
I'm not saying it's a bad mount, far from it, the post was just to make folk aware of a potential issue.
Ta
Todd
Nope, that's fine
Just reread my post and it makes it sound like I don't believe
Anyway, mines fine, seems like you had an issue with an over zealous clip.
Although we've only commented on 2, so that's 50% are good and 50% are bad!
i have the same mount for car and also have a belt clip....
These are the two best accessories that i purchased for my phone...
Hi, I have this one called Clingo I bought from ebay.
That is very nice, you can put any phone on that, I'am courier ran about 300 miles day, diesel car, my van vibrate a lot and the phone still there hehe.
I cannot put external links yet, but search for clingo on ebay, that's a good one.
Fabio.
Related
Hi all, after some advice re a car mount for my wonderful little gadget. I have a pdair leather case and as I use my phone a bit in my car (tomtom and some calls and even listening to podcasts etc) I am going to get a car mount and want opinions on the pdair mount http://www.amazon.co.uk/PDair-Sucti...2?ie=UTF8&s=electronics&qid=1267533319&sr=8-2 or the "arm type" mount http://cgi.ebay.co.uk/WINDSCREEN-SU...ries_MobilePhoneBatteries?hash=item5190b13e3c (or something along that line)... any help/advice would be appreciated...
FEI I am leaning more to the pdair version as I wont have to keep taking my phone out of the case and then puting it back in... but the arm type would prob be sturdier... decisions decisions...
I can only comment on the second item - as that is what I bought (along with a PDAir pouch for the HD2).
It holds well onto the windscreen and is reasonably solid. The unit doesn't really need the retaining clip at the top of the phone (unless you are doing some serious off-roading).
The only problem I have found is the length the holder is away from the windscreen. With most cars now coming with very sloping windscreens and the size of the HD2, you may find it very awkward to install and remove the HD2 from the holder (not a problem if you are fitting it portrait ways). My first attempt was to tilt the holder so that the top of the phone was closer to me than the bottom of the phone. Since I prefer to look at the phone without this incline, I used an old Adhesive plate (that came with my old car holder kit for a HTC Diamond), mounted that on the dashboard and attached the car kit to that.
I bought from this ebay seller and it doesn't come with a charger, yet you can buy the same item for the same price on ebay that do include a charger.
Thanks for the info Fred... I ordered one and will see how it works out... the dashboard trick sounds right along the lines I was thinking...
Hello all,
I love my seidio innocase ii and holster combo. I am looking for a car mount that will work with the case and allow charging too. I went by VZW today and looked at their Incredible Case. As stated in the other thread you can't use any case with it. I purchased a OEM air vent car mount, but the charging socket is blocked unless you slide your phone up in the grips (the two grips have holes cut out in the middle). I don't really like this one because the release button is at the top behind the phone. Not this one, but very smiler http://tiny.cc/eahgk
I would like to find one that can turn 90 degrees with a ratcheting action that the car charger can work with.
Bright Idea
I'm thinking about cutting up an old leather belt and gluing a small loop of it on the dash so I can clip my Seidio case on it. I'll let you know how it works out.
Just kidding dbrown! I am seriously eying the universal holder from http://www.proclipusa.com/ which definitely covers the usb port but I'm picturing a hole or slot cut through the side to fix that. All the other universal stuff looks HUGE
Why go for a universal holder when they have one made specifically for the DInc? Unless you have other devices you are planning on using with this. I just don't like their mounting spots for my vehicle, too bad too =/.
DeeBG said:
Why go for a universal holder when they have one made specifically for the DInc? Unless you have other devices you are planning on using with this.
Click to expand...
Click to collapse
We're looking for a holder that will work with the phone and case. I don't want to take the phone out of my case every time I need to mount it on the dash of my car.
I just got this:
amazon.com/gp/product/B003H92LSA/ref=oss_product
But I'm not satisfied with it. Cause to the short neck, The screen is head to the top of my head, and it's not very easy to get my phone on it.
Look for a better mount, still.
i've always used this gooseneck windshield mount from verizon.
you can find it by not specifying a phone under view all mounts..
Part #WINDMNT1
19.99
it fits most all phones ever made, plus cases.....
i have my inc in it tilted so i can access the touch screen keyboard...
i got a universal one from bestbuy and it works pretty good
I have one of these on the way. http://www.clingo.com/car-mounts/universal-hands-free-mount
I think that I would like to the get TETRAX XWAY to mount my DInc. Since I'm a new member I can't post links. Sorry.
I did see a nice video review and it seems like it would work perfectly because you can leave the phone in its case.
my friend got a car dock at the vzw store, the clip part the phone goes into is actually a removable belt clip. you can remove it from the car dock completely and put it all on your belt, pocket, whatever you wanna clip it to. however, there's no case involved in that package. i'm sure seidio has a case/clip you could mod to work with a similar product as i described first.
My plan is to get the car mount from htcpedia and the innocase holster for the Surface. Then either switch out the belt clips (hopefully), or just use my dremel on the innocase holster belt-clip to cut out the same as the mount's beltclip.
A little more expensive, but seems to be the best "factory-type" option I can come with.
QSilver9300 said:
I think that I would like to the get TETRAX XWAY to mount my DInc. Since I'm a new member I can't post links. Sorry.
I did see a nice video review and it seems like it would work perfectly because you can leave the phone in its case.
Click to expand...
Click to collapse
I have one of these too, it's awesome! If you want a mount that doesn't stick on the windshield AND works with a case...this is the way to go.
Hello,
I really like the xway too, but not sure if it would work with the inocase II. The case has a ridge that runs down the length of the back of the case. I went with this..
http://bit.ly/9lOy6V. I got the sm410 and currently using the vent grip. Its a little big, but does put the dinc with arms reach if needed. And the power cord is not blocked.
try something from here
http://www.bracketron.com/
i have the air vent mount and it works great with any phone including my incredible.
Arkon Mega Grip - Give them a try.
k.electron said:
try something from here
http://www.bracketron.com/
i have the air vent mount and it works great with any phone including my incredible.
Click to expand...
Click to collapse
I have the same one, picked it up from microcenter
http://www.microcenter.com/single_product_results.phtml?product_id=0281093
works well with my innocase active. but sometimes when you secure the dinc in place the mounts grips will press the volume button. its not too hard to position it in the middle of the rocker so it wont adjust it, and it not a problem once you have it set in there.
would buy again
I've tried several different mounts and haven't been happy with any, until now. I picked up a couple of the SoundGate M2 universal docks from wiredforless.com and could not be happier. The install was simple, once mounted it looks great and folds down into almost nothing. I don't know if it's still available, but I used discount code WOOT and got two of the mounts and shipping for $14.95.
AND, it works great with the Seidio case I have.
Great product, couldn't be happier.
Teksu said:
I have the same one, picked it up from microcenter
http://www.microcenter.com/single_product_results.phtml?product_id=0281093
works well with my innocase active. but sometimes when you secure the dinc in place the mounts grips will press the volume button. its not too hard to position it in the middle of the rocker so it wont adjust it, and it not a problem once you have it set in there.
would buy again
Click to expand...
Click to collapse
i position the left clasps to the bottom and the right ones to the center.. that ensures the volume button doesnt get pressed.
mike.d said:
My plan is to get the car mount from htcpedia and the innocase holster for the Surface. Then either switch out the belt clips (hopefully), or just use my dremel on the innocase holster belt-clip to cut out the same as the mount's beltclip.
A little more expensive, but seems to be the best "factory-type" option I can come with.
Click to expand...
Click to collapse
You can switch out the belt clip on the car kit holster with the Seido clip, I've done it. Just tap out the pins in both clips, place the spring back in between the clip and the holster and tap one of the pins back in. Works like a charm. Now I'm trying to get all the audio and charging done with a modified 12 pin micro usb from the TV OUT cable.
I did reviews on these:
http://www.youtube.com/watch?v=awh6QP8-BBE
http://www.youtube.com/watch?v=e2MaD_ZOKCo
Highly recommend these and I use with my Seidio II.
Looks like the custom ones are starting to appear not a bad Price at £15.99
http://cgi.ebay.co.uk/FLEXIBLE-SUCT...K_AudioTVElectronics_PDAAccessories_PDAMounts
And £13.99 for the Vent kit
http://cgi.ebay.co.uk/SWIVEL-CAR-AI...K_AudioTVElectronics_PDAAccessories_PDAMounts
Hmm, Pre-order and the pictures are faked (charging lead plugging in the left hand side?). Best wait till after their September due date and check again, it looks like it will be a nice solution if it arrives.
I bought a universal car dock from ebay and whilst the phone fits (kind of) the streak is just so damn heavy it shakes about A LOT. It's usable, but very irritating.
Not sure what these 2 will be like though, but watch out for shaking
saving seller for future use.
Now they are on i am sure their will be more to follow ie China
ah, the chinese. good food, attractive women, cheaply made, cheaply priced inferior products we just cant resist. gotta love em
Yep that is all True and Yep We never Learn and we BUY BUY BUY dont we just love em
Considering the car docking kit from Dell is perfect, I don't see why anyone would consider a third party car station.
Muo said:
Considering the car docking kit from Dell is perfect, I don't see why anyone would consider a third party car station.
Click to expand...
Click to collapse
Sure... aside from the over-inflated price. I bought mine from a local Wireless Wave here in Toronto and it works just as well for $20 taxes in.
Dell car kit far from perfect
I bought the car kit from Dell, and no matter whether the device is hanging from the windshield or off the dash, the Streak bounces around like mad when I am driving. My car is nowhere NEAR that bad - it is a heavy device and an awkward mount.
I just ordered a GPS t-mount from ProClip that might work well. I will take the sleeve the Streak sits in on the gooseneck and mount that on the ProClip mount, then attach that to the vehicle mount made for my car. That should lock the device down.
It's an expensive solution, but I spend about an hour each way commuting daily, so it is really a necessity for me. My mount should be here on Wednesday, and if anyone is interested I will write it up and post a picture or two if it works.
pictures would be awesome.
Do you see anyway to have the adapter attached (jerry-rigged) to the mount so that it plugs in when you insert the Streak?
I am looking for a way, as plugging the cable in is extremely tempermental, and a pain, to be honest!!
I suppose you could do something on the bottom of the Dell sleeve to hold the cable. I will have my cable secured on the console and the mount, so it is no problem for me to plug it in the bottom of the phone when I put it in the stand.
The mount comes in tomorrow. Can't wait. Had to slam on the brakes on the way home today and it looked like my phone was on the business end of a trebuchet...
cue_32 said:
Sure... aside from the over-inflated price. I bought mine from a local Wireless Wave here in Toronto and it works just as well for $20 taxes in.
Click to expand...
Click to collapse
In the US it is only 39.99.... not too expensive if you ask me. Plus this car docking kit really is perfect for the Streak. The sides are flexible rubber that hold the Streak and on the back there are rubber pads so absolutely no plastic is touching the Streak resulting in no scratches. Plus you get a a cable with it.
Perfection is worth the 40 bucks. Although I would love to see images of the one you purchased and seem pleased with.
I have the Dell car kit and I like it. It seems reasonably priced at $40 since it comes with a cigar lighter-USB adapter and USB cable as separate items. One can never have too many charging cables or options. The mount does jiggle a bit however this can be cured by positioning the mount so the cradle rests on top of the dash rather than suspended in mid-air.
Sent from my Dell Streak using XDA App
I'm looking to use the dell case inners for a car holder. I have some garmin mounts that will allow me to fix to the dash.
The issue with the ones from ebay (original post) the holding part is covering the power pdmi connector.
Sent from my Dell Streak using XDA App
Anyone thinking of making their own car mount should make clearance for the camera lens so it can be used as a dash-cam. Dell did not do this and it would require some cutting on their kit.
Sent from my Dell Streak using XDA App
I acutally brought one of these:
http://www.mobilefun.co.uk/clingo-universal-in-car-holder-p25398.htm
The arm is solid but since it still sticks out a fair bit and the phone is kinda heavy, it does bounce a little (nothing compared to the flexi arms you find on most other phone holders). And since the Dell has a flat back, it sticks pretty well too (though I have had it drop once but I think that was cos my brother didn't put it on properly and due to the weight, it slowly peeled itself off). The pad only covers a small area of the back of the phone so you can use the camera, and there's also no clamps that would obscure the charging port or the buttons on top.
If the docking station was cheaper, I'd seriously consider getting another one for the car, that way I can easily put it on and take it off with super easy and I can leave the cable plugged in and just tuck it away (saves so much time when I do multiple deliveries and stuff).
da_ferreira said:
I bought the car kit from Dell, and no matter whether the device is hanging from the windshield or off the dash, the Streak bounces around like mad when I am driving. My car is nowhere NEAR that bad - it is a heavy device and an awkward mount.
I just ordered a GPS t-mount from ProClip that might work well. I will take the sleeve the Streak sits in on the gooseneck and mount that on the ProClip mount, then attach that to the vehicle mount made for my car. That should lock the device down.
It's an expensive solution, but I spend about an hour each way commuting daily, so it is really a necessity for me. My mount should be here on Wednesday, and if anyone is interested I will write it up and post a picture or two if it works.
Click to expand...
Click to collapse
which t clip did you get i use brodit mounts all the time and am just about to buy a streak .... am gonna get the car kit cos there is £25 off it when you buy both from dell direct .... but i hate mounts that sit on the window ..... so the t clip sounds good solution ,.,, which one did you buy and where from ???
ta
I've seen the Dell car mount kit, and it seems to have a snugg fit to the dell.
my question is... can you use it with a case over the Dell, something like the form fit case from Dell.
Keethos said:
I acutally brought one of these:
link: mobileFun
How good is it really? does it pad really grip the device. I'ts an interesting concept, but does it hold onto the Dell through a long journey.
would you recommned it?
thanks
Click to expand...
Click to collapse
Can anyone suggest a not too expensive car mount that fits the tmo HD2? the windshield kind, not the vent kind.
NOt sure..but this is the best one!
http://www.proclipusa.com/home/home.aspx?afid=42&admkt=670ca577&gclid=CKTHtJipw6QCFUNM5Qod1Wf8iw
I found a perfect mount at compusa that is made for an iphone but works great on my HD2. can send part number if needed.
Sent from my SGH-T959 using XDA App
I use the Tetrax Xway. It requires a magnet on the back of the case. I initially thought it would be annoying but I positioned it in the very middle of the phone so the phone can spin on it. I can't tell you how much enjoyment being able to spin my phone has been. With a good twirl it can spin for 2 minutes 30 seconds. I really freaked people out when Inception was big as it seemed to never stop spinning like that totem.
But the actual mount attaches to the car's AC vent which is the perfect position. The center console just seems too far away. It can be just to the right of the steering wheel.
An additional benefit is with a neodymium magnet set I got from ThinkGeek I can mount the phone anywhere that's metal. I just take four of the little cylindrical magnets and form a square with them. The phone magnet fits quite well in the divet in the middle of them. I now have a phone mount on the hood of the oven to load recipes while I cook (or watch a movie). It's quite secure, and the magnet won't hurt the phone. Just keep anything with a hard drive away like an iPod.
An interesting possibility would be to buy a cheaper clip on cover from eBay (preferably black) then buy a cheap gps mount. Then glue the case onto the mount. Then you will have an adjustable $10-15 cheap car mount
i wonder if they would make one that fits hd2 that has an otterbox case on it
It's amazing! Best custom mount I've owned. And the clip that holds the phone is also a removable belt clip. There's a punch out for the camera, been driving around with layar turned on. It is win.
Sent from my ADR6300 using XDA App
link?
10 chars etc
I haven't seen it online yet, only in a store so far. Ill post pix later.
Sent from my ADR6300 using XDA App
Is it any different than this one?
http://amzn.com/B003LEGZGK
AFAIK, this is the only custom mount of ANY KIND for the Incredible produced by HTC, which drives me crazy.
tdiman said:
Is it any different than this one?
http://amzn.com/B003LEGZGK
AFAIK, this is the only custom mount of ANY KIND for the Incredible produced by HTC, which drives me crazy.
Click to expand...
Click to collapse
There are two versions available from the Verizon store. The one you linked to and one other. They both have one big issue. If you already have a protector for your phone that you like, it will not work unless you take your protector off. The one you linked to has one other issue, it uses double sided tape to mount. The other one I looked at had a suction mount, but as I said, it will not let you put your phone on it unless you remove any protector you are using.
the one linked is the one i'm talking about. i haven't found it on the VZW website anywhere, didn't think to look anywhere else. i don't use a case or anything full time, i ordered an otterbox for when i'm working to wear on my belt, but when i'm not i just throw the phone in my pocket and run. i wish seidio came out with a car mount like this that worked with one of their cases, that would be epic. i'm sure with a dremel tool you could make it work if you were so inclined.
I have this one
I bought this with my incredible when I first got it. before 30 days was up the clip broke. I took it back and got it replaced. Then a couple of weeks later the new one broke in a different place. I hadn't even taken the new one off the car mount and worn it on my belt. I ended up cutting off the clip and gluing the clip to the mount so that it became a car mount only.
dltccf said:
I bought this with my incredible when I first got it. before 30 days was up the clip broke. I took it back and got it replaced. Then a couple of weeks later the new one broke in a different place. I hadn't even taken the new one off the car mount and worn it on my belt. I ended up cutting off the clip and gluing the clip to the mount so that it became a car mount only.
Click to expand...
Click to collapse
where did it break?
i'm wondering if there's a way i can use another company's clip and case without having to remove it. thinking of getting the seidio innocase and clip or something like that, maybe just cut the little tab off of the car mount clip and using that on whatever one i end up getting.
I don't want or use the belt clip, just adds another point of movement to the system. There's no happy medium with adjustments, you either get it where you want it and tighten it down to no flexibility, or it is way too loose. Due to the way the suction cup is engineered, the act of placing the phone or removing it from the clip torques the suction, causing it to fall off all the time. Was not at all impressed.
I have this mount I just pictured. I find it reliable. I do not use the belt clip.. I always leave that on the mount.
I have never used phone cases on any of my cell phones for 12 yrs.. I only have a screen protector..
Dinc goes in my phone pocket. My designated pocket only for my phone.. Not change or car keys..
Carefull
I have one of these.. or I should say I've had 2 of these. First one broke after about 8 seconds of being up and I tried to rotate the phone, and the hing that holds the clip on snapped.
Took it back to Verizon they swapped it out... had the second one a month or so and went to remove the phone and clip from the stand... and the plastic washer that holds the clip to the mount broke.... I now have it zip tied and it works great.
I was not rough with it, its just very fragile. Otherwise a good mount.
I've had 2 and the first one broke within a week. The clip that hooks into the mount broke and wouldn't mount. The second one I had for a few days before it broke. The one the hinge went. I didn't bother trying to replace it again. They did swap it out, but if two break that quickly, I figure I'll just keep having the same problems.....
Add me to the "it's too darn fragile" camp. I ended up buying a third-party "one size fits all" type... They lie too, but it works. I just have to adjust it so the volume key isn't being squashed. (also, no cut out for camera)
2 broken clips at hinge and counting.
Same here, my clip hinge broke both times. I just have it sitting there in the car driving down the road and the phone just falls off and the hinge is broken. I think the plastic is too thin, should be a metal part, and the spring tension always on it fatigues it. Bad design.
I went to verizon and told them I wanted their generic mount and they handed me this:
http://www.amazon.com/Bracketron-PH...r_1_41?s=STORE&ie=UTF8&qid=1285511830&sr=8-41
The one Verizon actually sells is slightly different as the little bottom nodes that hold the phone phone sits on can be bent in and thus you can move the phone around. I will have to take a picture of mine. Anyways even with a case it fits perfectly and its only like $20 and if you have the corporate discount which gets you 25% off it runs about $16.70 total after taxes which is what I bought it for.
angryspoon said:
I went to verizon and told them I wanted their generic mount and they handed me this:
http://www.amazon.com/Bracketron-PH...r_1_41?s=STORE&ie=UTF8&qid=1285511830&sr=8-41
The one Verizon actually sells is slightly different as the little bottom nodes that hold the phone phone sits on can be bent in and thus you can move the phone around. I will have to take a picture of mine. Anyways even with a case it fits perfectly and its only like $20 and if you have the corporate discount which gets you 25% off it runs about $16.70 total after taxes which is what I bought it for.
Click to expand...
Click to collapse
So which one would you recommend? I plan on doing a lot of driving up and down I-95 to visit friends in Maine/NH/PA/MD/VA and would love having Google's "Navigator" mounted on my windshield instead of having it sitting in a cup holder (like I do now). I'll be careful with any mount I get, but those universal mounts are just too bulky and a lot of them mess with the volume controls or doesn't leave me a space to plug the phone into my lighter outlet (or have weird mounting points, like in one of the air vents).
DeeBG said:
So which one would you recommend? I plan on doing a lot of driving up and down I-95 to visit friends in Maine/NH/PA/MD/VA and would love having Google's "Navigator" mounted on my windshield instead of having it sitting in a cup holder (like I do now). I'll be careful with any mount I get, but those universal mounts are just too bulky and a lot of them mess with the volume controls or doesn't leave me a space to plug the phone into my lighter outlet (or have weird mounting points, like in one of the air vents).
Click to expand...
Click to collapse
I really recommend the Verizon one made for the incredible. all buttons and ports are accessible on the incredible
Like I said, I leave the belt clip mounted at all times, and the only protection I use for my phone is my special pocket and a screen protector.
patches152 said:
It's amazing! Best custom mount I've owned. And the clip that holds the phone is also a removable belt clip. There's a punch out for the camera, been driving around with layar turned on. It is win.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I just bought it on a whim today and it is definitely great. Way better than the staples generic one that broke in the first 2 weeks
Wife and I both have one. Both broke right away. Replacements also broke. Always in the same place, the hinge for the clip snaps. The spring is simply way too powerful for the strength of the plastic. On the replacements I just slathered epoxy all over the hinge to make it a permanent mount. Neither one of us were using it for anything other than the car dock, but the thing just breaks like a cheap wine glass.
So in my experience they were 4/4 for breaking within 3 weeks. It's a great dock, but you just have to expect it to break unless you do what I did and glue the living crap out of it.
ive had my verizon mount for about 2 weeks now, my only complaint is that it has a removable belt clip. Ive tried different locations around my windshield and since I play with it so much, the clip has wiggled loose a time or two. other than that, its been better than any mounts ive tried to hack together for it.
TL;DR good mount, bit pricey