[HELP] Acer Liquid E's camera - Liquid S100 General

Hello everyone,
Long time reader and supporter but just now made an account because I cannot figure out how to fix this issue.
Device Information:
Android Version: 2.2
Baseband Version: A1-05.01.04
Kernel version: 2.6.29
Build number: Acer_LiquidE_4.001.08_PA_ROG
2 days ago i was about to take a picture and someone called me, after hanging up the phone crashed. So i had to reset reboot it. When I tried to use the camre again, the camera image had a red tint on it, as if its stuck on Porterize Color Effect.
I know this is fixable because when I use the camera for a split second I can see the image properly and then it goes into the red overlay effect. I can also switch in between all other color effect...
I've tried using a dif rom and still the same!
Any ideas?
If anyone trying to help me needs anymore information please let me know.
Thank you,
p-Lo

Related

[Q] Hello, and a couple of questions

Hello, I just got a nexus one and I love it
I do have a couple of questions, thank you in advance
1. I noticed (when watching reviews) everyone has a cool "cube" type of menu. Mine is flat. I do not have the 3d effect.. how do I turn it on?
2. Video recording quality is really bad in low light.. I have a class 4 micro SD in the device. What gives?
Thanks again
1. You don't turn it off or on, it's just there. Assuming you have the standard ROM, if it's a custom one then you may have a different launcher installed.
2. It's a phone, that's what gives.
Thanks. Is there a way to turn off the vibration when the phone is unlocked? Every time I unlock it, it vibrates. It's annoying.
I also checked in settings, and this is what it says:
Android Version:
2.2
Baseband Version:
32.36.00.28U_4.06.00.12_7
Kernel Version:
2.6.32.16-The Official-AudioMOD
[email protected]#1
Build number:
FRF91
Is the stock Rom better than what I have? If yes, how to go back to stock?
Thank you

Wi-fi Error and Unknown MAC Address?

Hello guys, I just "bought" a Milestone from a friend and I'm having a problem. Don't matter what ROM or Kernel when I try to activate Wi-Fi the phone starts to act VERY slowly and sometimes stops to work. In airplane mode my Milestone works OK. I tried a lot of apps but nothing worked. I saw this post, but when I tried to copy the file from the phone to the SD to check, it said that doesn't exist, also my MAC Address is "unknown". I talked to my friend and he said that the issue started to happen after he started trying to use Toggle 2G/3G.
Another thing that I saw is in my RSD Lite screen, it doesn't show everything (I can see my IMEI in the "about" screen).
Android Version: 2.3.5
Kernel: 2.6.32.9
ROM: CyanogenMOD 7.1.1 RC14
Build:R.U.R.1920
Sorry about my english.
i still need help.

[Q][GT-I9001]No custom ringtones in Simplistic Light V3B2?

Hello everybody!
I have some questions about the two ROMs named in the title.
Because I am a new member I am not allowed to post in the development threads of these ROMs and because I can't find anything to solve my problems I decided to start a new thread.
These are my issues:
Edit:
Mh, I have a new problem additional to the three below:
I set a mp3-file as ringtone. But the phone seems to "forget" this from time to time and when somebody calls me there is no ringtone at all. Same thing happens with a ringtone set for a specific contact.
Any ideas what could cause that?
SOLVED: FC/Reboot on BlazR RC-8.2-ICS
Look here: http://forum.xda-developers.com/showpost.php?p=28049137&postcount=826
I've installed BlazR RC-8.2-ICS on my Samsung Galaxy S Plus and everything worked fine. I wiped the Dalvik cache and formatted /system, /cache and /data (as I always do before installing a new ROM. Source:http://forum.xda-developers.com/showthread.php?t=1578821 First Post: "6. How to format").
Then I installed the zip from sdcard, booted my phone and wanted to download Titanium Backup from the Google Play Store.
After downloading the app, it said "Installing..." and after a while the screen turned black, it played the boot sound and then wifi and mobile network were down and it scanned the SD-card for mediafiles. This happens everytime when I want to install an app from the Google Play Store.
I rebooted the phone several times and tried other apps, but nothing works.
Are there any solutions for this problem?
SOLVED: Download-Issue with Simplistic Light V3B2
Download unavailable at the moment
I've tried to download this ROM like 10 times, but every time the file is just 163.339 KB and WinRAR says "Unexpected end of archive". All other downloads are fine. Is the uploaded file broken or is it something else?
SOLVED: Strange behavior in Simplistic Plus Final 2.0
I reflashed the ROM. Atm, it seems to work. But I still can not set a mp3-file as ringtone. After 12-24h the phone forget this setting and then there is no ringtone at all.
At the moment (actually for months) I use the Simplistic Plus ROM but suddenly something seems to be broken.
From time to time there is no lockscreen after turning the screen on. The phone seems to be awake all the time and generates a massive battery drain. Also the Reboot-Shutdown-menu (hold the On/Off-button) does not come up. Instead the screen turns off and nothing happens.
I didn't change anything in the settings, I removed all new apps but it still happens.
Have anyone the same experience or even a solution for this problem?
Additional informations:
My phone: Samsung Galaxy S Plus (GT-I9001)
ROM: Simplistic Plus Final 2.0 (Link)
Recovery: FeaMod Recovery v.1.4
Firmware Version: 2.3.6
Baseband Version: I9001XXKPL
Kernel Version: 2.6.35.7-SkyHigh [email protected] V1.4
Build number: SIMPLISTICPLUS.F2
Sorry about my bad english and for bothering you guys with my problems.
Thanks in advance for your help!
Greetings,
Mangoniter

[Q] Keep this old phone alive. touchscreen kernel

Would appreciate the help
First the brief version;
Motorola droid (sholes) tried flashing a new rom and the touchscreen no longer works.
Have researched for days with no luck and have tried a restoring a back. No luck.
Now if your still reading this is the more in depth version;
Rooted my sholes (along with a thunderbolt) many months ago, enjoy being rooted. However recently the droid stopped connecting to wifi tether from thunderbolt. So I decided to try another rom. Well soon as I rebooted to the activation screen I realized there was an issue, the touchscreen did not work at all. At first I thought that the phone had finally given out as i had dropped it and cracked the screen months before.
As it happened I had another Droid laying around that was stock. So I rooted it and installed the same Rom (I don't mention the rom because I am not 100% sure which it was). Got to activation page and realized I had really messed up.
Can anyone think of a solution? (I believe I've narrowed it down to the kernel being the issue)
As the phones sit here is the software information I can tell you
Cracked Screen:
Android version 2.3.7
Baseband version C_01.43.01P
Kernel version 2.6.32.9-cm-stk [email protected] #1
CPU info ARMv7 Processor rev 3 (v71)
Mod version CyanogenMod-7.1.0-Droid
Build number Gwk74
*Phone keeps coming up with a force close for android.process.acore if that is helpful
Noncracked Screen:
Android version 4.0.3
Baseband version C_01.43.01P
Kernel version 2.6.32.9-cm-stk [email protected] #1
CPU info ARMv7 Processor rev 3 (v71)
Mod version CyanogenMod-9.0.0-RC0-Sholes-CDMA-KANG
Build number ICL53F
This is my first time posting here and I am fairly new to rooting so hope I have asked for help correctly and provided the information that is needed.
Thanks in advance
I had the same issue, and it's been touched on in threads of ROMs it affects in the dev section.
I've been told the touchscreen is stuck in bootloader mode. I was able to get mine freed up by restoring a backup. Not sure if if came free after the initial boot, or a reboot. YMMV, but worth a shot as restoring a backup won't worsen your situation and just may work!

Nubia z17 mini doesn't charge when powered off

Hi all,
I have a brand new nubia z17 mini eu version. I have noticed that when the phone is turned off it doesn't charge (the red notification blinks but nothing appears on the screen nor the phone vibrates).
I thought it was due to the software OTA last update. I performed a factory reset but the problem persist.
I also noticed that rarely but not always, when the phone is turned off I'm able to charge it using the PC port.
Anyone has faced the same issue? Is there a way to solve it? I am afraid of running out of juice and won't be able to charge the phone anymore.
P.S: I tested with another cable and another charger and the same occurs :crying:
Maybe the following phone details are useful:
Model number: NX569J
VTELCA UI: V4.0
Compilation number: NX569J_ENCommon_V1.07
Kernel version: 3.10.84-perf-g1269e29-00244-g8850126-dirty ([email protected]#1)
Android version: 6.0.1
Hardware version: MB_C
Thank yo sou much for your time

Categories

Resources