Hey there guys,
Long time since i've dealt with my diamond..
unfortunately, after putting a couple of hours into trying several ROMs/Radios and 2 versions of Android for diamond, i STILL can't get this to run.
Installation seems to go properly... and the startup files are from the original builds.. and still, when i run haret, instead of booting into android, it reboots after the green line loads.. and goes back to WM.
I'd appreciate if any of you has an idea as to why it would happen.
thanks in advance.
I have the same problem with the newer version of haret on my blackstone. Did you find a solution?
Same problem to me.
I don't know what happends
Diamond: diam300
Android : FroyoBV6
Every time I press haret , Diamond reboot and star Winmo again
Not sure if this is related, but I am having the same problem with 5/31/2011 HaRET on my rhodium 210...
Related
I have updated my Diamond with the latest Unsigned SPL (dev. editon)
and had for about 10 versions of 6.5Rom on it.. (over a couple of months)
last time I did get errors in the filesystem (of the phone mem)
all sorts of random letter dirs, sometimes (3 gb) big, and undeletable (with total commander ect..)
when I tought that it was a rom error, I reflashed the rom, but the problem remains (with 3 different 6.5 roms) (they did work before..)
when I Installed 6.5 on it, it also skipped some setup , like I didn't get the screen alignment, then it asks for the time and date, and after that it just skips the password question.. None of the roms work like they should, when installing to device memory the phone often hangs and instalation doesn't complete...
and now for the strangest thing: when i decided to send the phone back for maintance, and i put the original signed SPL and a official 6.1 rom on it, the phone functions normaly! no errors whatsoever...
as soon, as I install a 6.5 rom again, the same problems show up again, the same 6.5 rom that worked before!
what can this be??
I think i might have the same problem on my diamond. I installed a rom based on the new 23001 kitchen floating in the forum. Didn't add anything to it, just 6.5 with tf3d2, nothing else, all i wanted. No custom icons/skins, just plain old vanilla.
After a while i get a similar problem to what you described. File system errors and sometime it even resets the rom to 0 so i have to realigned the screen and set time and date. Then i get memory errors. Really annoying.
I shall try a 6.1 rom later and report back to see if it fixes mine also.
would also like to know why 6.5 seems to do this!
http://forum.xda-developers.com/showthread.php?t=528550
found this thread.. hope it helps!
hi
i had installed wm 6.5 (lost in asia version 6.5) on my HD. i cant able to boot android on my phone. android will work on wm 6.5 ?. when run "haret" its goes to command screen then hanging a long time. i have to remove the battery to boot it my HD. i am using sandisk 8gb mmc. can anyone help me in this.
2255
when u start haret... winmo will be deactivated....
Yes, so it doesnt matter what version of winmo you use.
Try downloading it again and unpacking it to the Root of your memory stick (so not in any folders).
Also, try putting the touch hd in activesync mode and connect to a pc, then try to boot android.
As it is though, dont put time in to getting that version of android version as tuxhero is completely restarting the project - rewriting all of the code, so expect that work better anyway.
When i trying to boot Android it does a soft reset on the point where haret boots
i have tried all versions and startups
can anyone help me pls?
If you read the main thread there a literally dozens of 'fixes' available to you to resolve pretty much any issues.
I have tried the Package 1.6 from the Main Topic
It boots an hangs at the black background with white font.
Hangs at: console handover : boot [htc_fb0]-> real [tty]
federaly said:
If you read the main thread there a literally dozens of 'fixes' available to you to resolve pretty much any issues.
Click to expand...
Click to collapse
Not for this one, an issue a few people seem to have. I already made a topic about it in this subforum though, "Android not booting".
Some people say:Bought after 2010 or 2010 production,topaz have different Hardware then topaz Bought before 2010 ,is it right?
i came from China ,can anybody understand what i say?
my msn :[email protected]
Android cannot boot (hopeless)
I think I am so dumb.
It has been three weeks I have been trying to install Android on my TD2 with no success at all.
On the above left corner it says:
HaRET boot
Shutting down hardware
Turning off MMU...
In preloader
PSR=600000df
Could anyone help me please?
@ hsiregar
Which android have you installed.
XDAndroid Version froyo 2.2 RC 2.1 works very good on my topaz.
1.)You have to save the datafiles from your sd-card
2.)Format SD-Card as Fat32
3.) Install XD-Android from this forum,latest version
3.)Copy Startup.txt from StartupConfig/Topaz/ to your device.
4.)Run Haret.exe
5.)After a few second there is a white square on the desktop in upper left side
6.) tap on it and then to the second,third,fourt und five square that appear.
7.) It takes too last 10 until 15 Minutes after Android boots
8.)Android show screen on desktop for 5 minutes
9.) Wait carefully,it belongs a while after android starts after installation
10.)Android starts with the lockscreen for your simcard
11.) be happy and enjoy
greetz from germany
pego2007
When I go to boot android from my SD card it won't load. I run Haret.exe and then the linux boot screen comes up, but then i get this message at the bottom:
Kernel panic - not syncing attempted to kill init!
2.165865 Rebooting in 3 seconds.
After this last line it stays frozen forever. I am using Myn's latest Warm Donut, and yes I have all the files on my SD cards root, and it is formatted to FAT. I haven't taken anything out of the files that I downloaded. Any help would be greatly appreciated.
Thanks for all the great work
Same thing happened to me
I used to do this kind of stuff on my Kaiser. I don't know what is wrong. But, I get the exact same problem.
HELP same is happening to me.
I get the same message on my sprint Touch.
Kernel panic - not syncing attempted to kill init!
2.165865 Rebooting in 3 seconds.
does anyone know the solution to this. I tried Myn with same freeze. Android 1.5 worked but then it shuts down after 5 min.
All other builds give me the same message and then FREEZE.
Thanks for your help.
2.165850 Rebooting in 3 seconds
Please help!
I am seeing many others with this same issue when booting from SD when I searched for "attempted to kill init!" under Vogue CDMA.
Kernel panic - not syncing g: attempted to kill init!
2.165850 Rebooting in 3 seconds
After that it just stays frozen. Any help would be great appreciated.
I had this exact same problem yesterday and I finally solved it after messing with the phone all morning.
I am using the verizon version of the phone btw and I am kind of a newb to this whole process.
The boot problem ceased after I installed windows mobile 6.1. I can't post the link because I am new to this forum, but it was a verizon package of windows 6.1 that included a radio update. I think the reason it fixed the boot problem was because it updated the radio.
Please note that by doing this I had to call verizon and re-activate my phone on their network (while having windows mobile 6.1 installed on the phone.)
After installing windows mobile 6.1 on the phone (with included radio update), I was able to flash to Android with no problems and no longer got the freeze up at "rebooting in 3 seconds.."
Hope this helps!
2.165850 Rebooting in 3 seconds
zmanb said:
I had this exact same problem yesterday and I finally solved it after messing with the phone all morning.
I am using the verizon version of the phone btw and I am kind of a newb to this whole process.
The boot problem ceased after I installed windows mobile 6.1. I can't post the link because I am new to this forum, but it was a verizon package of windows 6.1 that included a radio update. I think the reason it fixed the boot problem was because it updated the radio.
Please note that by doing this I had to call verizon and re-activate my phone on their network (while having windows mobile 6.1 installed on the phone.)
After installing windows mobile 6.1 on the phone (with included radio update), I was able to flash to Android with no problems and no longer got the freeze up at "rebooting in 3 seconds.."
Hope this helps!
Click to expand...
Click to collapse
Thanks zmanb!
I got it to work after updating my ROM to WM6.1 with new Radio from HTC web at: htc.com/us/support/touch-sprint/downloads#133
Thanks again for your reply. I am now running : Myn’s Warm Donut - [RLS 5 - 04/24/2010] -Added X10 & Teds Espresso Themes 04/26
Use the sprint one, it unlock gps as well.
Hi i download haret 0.5.2 and all files i need to make htc tytn II adroid but when i start to run haret my phone stuck.....can anybody shaw me the right walkthrout to make it right?
Maybe the same problem I had with my hx4700 last night, it would freeze and error out. Then I tried a much earlier version of HaRET ,0.1.3 I think, and booted without troubles after that. My advice would be to find some older versions and try those first.