Related
OK, I've been reading here for 6 days all manner of Captivate unbricking. Here is my story...
I picked up a Captivate on the Rogers network. I connected it to my email server (Exchange 2010) with no problems, poked around, noticed the lag, noticed the SMS time issue, then promptly rooted, installed clockwork, and then threw cognition 2.2 beta 9.1.3. Quite frankly I was shocked at how much faster it was.
Anyways, after a day of poking around, I could not get my email to my exchange server running (tried the email.pak floating about), so I actually decided I was going to go back to the backup I made of my phone using clockwork before I installed cognition. When I restored my backup, I thought I had bricked my phone.
I let it rest for a day, then came back here, and found one of the 3-4 different variations of the 4 button download mode combo that permitted me to do the 1 click restore. This restored me to the AT&T version of 2.1. It worked, but was less than desirable.
I decided that at that point I really wanted to go back to stock, so I downloaded the stock backup on the Rogers Captivate wiki page, and did the restore using clockwork. The phone has not been the same since.
When i turn it on, I get an at&t splash screen, then in about 20 seconds I get the at&t "jingle", but the splash screen stays on. I can't seem to find any key combination that will permit me to get back into download mode so I can restore using the One Click that worked for me the first time. I have tried:
1. 3 button salute with USB in first, battery out initially.
2. 3 button salute with USB plugged in *as* I was inserting the battery.
3. Power and volume down (both with and without USB, and with battery being plugged in after USB and "during" insertion of battery)
4.Power and volume up with same combo's as #3.
5. Just volume up and volume down with same combo's as #3.
In all cases Odin was running before USB connected, running as administrator. I'm running 64bit windows, but I'm sure I have the correct drivers because I did this the first time with Odin and download mode and I haven't added or changed anything. But just for arguements sake I did uninstall, and then install the drivers again.
Any combination of power and volume buttons just gives me a battery charging logo. Occasionally when holding up until the second black screen I will get a quick indication that the computer might see something, but it dissappears withing a handful of seconds showing it promptly removed.
I'm downloading the Android SDK in the hopes that when I get the normal at&t splash screen after the "jingle" that something might actually be running in the background and maybe I can adb reboot download it but I'm not holding my breath.
Anyone seen this that has managed to get out of it? I'm starting to think the "unbrickable captivate" can be bricked. Assuming it is bricked, short of taking it back, is there anyone on the internet that can jtag these and in some fashion bring back to life?
Cheers,
Tim
This doesn't belong in Development.
MikeyMike01 said:
This doesn't belong in Development.
Click to expand...
Click to collapse
ditto
and download mode is easy.
1. start odin3 and have data cable plugged into the computer
2. insert proper files if needed
3. hold volume up and volume down for 2 sec (no power button needed) then insert usb cable, continue to hold volumes till either the download mode screen pops up or odin3 sees the phone(if you bork the phone bad enough you can corrupt the download mode image, i did it with the not to successfull manhatten project kernel) but despite the screen being black it very well may be in download mode.
4. start flash
5. if it doesn't work send it to me ill find a use for it
alternatively if the phone can go passed the splash screens and boots fully you can adb reboot download. just get the development kit and drivers on your pc.
Dani897 said:
ditto
and download mode is easy.
1. start odin3 and have data cable plugged into the computer
2. insert proper files if needed
3. hold volume up and volume down for 2 sec (no power button needed) then insert usb cable, continue to hold volumes till either the download mode screen pops up or odin3 sees the phone(if you bork the phone bad enough you can corrupt the download mode image, i did it with the not to successfull manhatten project kernel) but despite the screen being black it very well may be in download mode.
4. start flash
5. if it doesn't work send it to me ill find a use for it
alternatively if the phone can go passed the splash screens and boots fully you can adb reboot download. just get the development kit and drivers on your pc.
Click to expand...
Click to collapse
Thanks, but that doesn't work. All I get is the battery charging screen. Using the process it does not go into download mode.
MikeyMike01 said:
This doesn't belong in Development.
Click to expand...
Click to collapse
Could a moderator move this to Captivate General then? Sorry about that...
timmy22 said:
Thanks, but that doesn't work. All I get is the battery charging screen. Using the process it does not go into download mode.
Click to expand...
Click to collapse
just to be clear, you are holding volume up as well as volume down starting with the phone being powered down and continue to hold them after you plug in usb untill something shows on the screen?
if your phone is not seeing the volumes buttons you are one of the very unlucky few that had a problem at the most inopportune moment.
there is also a way where you hold all three buttons till the phone reboots twice, or something. let me try it and ill give more specifics.
timmy22 said:
Thanks, but that doesn't work. All I get is the battery charging screen. Using the process it does not go into download mode.
Click to expand...
Click to collapse
Pull the battery, open odin, plug usb into computer, hold vol up and down, plug usb into phone still holding vol buttons, drop in battery still holding vol buttons, when dl screen pops up and yellow com port lights up in odin release volume buttons. Do not touch power button at any time
Swyped...and sorry I don't proofread
Have you tried rebooting into recovery mode instead of download mode? Stock recovery is adb-ready and you should be able to adb reboot download. Its a long shot if you're having problems using button combo to get to d/l mode, but it's probably still worth a shot at this point.
If you were able to use 3 button combos before all this happened, and did NOT have to install the 3 button combo fix, its strange you don't have access to it now... Could restoring a Rogers Cappy to AT&T stock be the problem?
Dani897 said:
just to be clear, you are holding volume up as well as volume down starting with the phone being powered down and continue to hold them untill something shows on the screen?
if your phone is not seeing the volumes buttons you are one of the very unlucky few that had a problem at the most inopportune moment.
there is also a way where you hold all three buttons till the phone reboots twice, or something. let me try it and ill give more specifics.
Click to expand...
Click to collapse
Yes, that's exactly correct. I do this:
1. everything pulled (battery, USB, sim, sd)
2. Open Oden (1 click)
3. Install battery
4. hold down (and keep holding) volume up and volume down
5. insert USB cable
6. depress (i.e. don't hold) power button
Goes straight to battery charging indicator.
If I swap #6 with holding the power button down, it continually reboots while just barely showing the battery charging indicator. I've tried letting go between black screens on the 1st, 2nd, 3rd, 4th, and 5th black screen. Still no android dude with the shovel.
Try all the steps you stated but not the last one where you press the power button. Don't press the power button.
newter55 said:
Pull the battery, open odin, plug usb into computer, hold vol up and down, plug usb into phone still holding vol buttons, drop in battery still holding vol buttons, when dl screen pops up and yellow com port lights up in odin release volume buttons. Do not touch power button at any time
Swyped...and sorry I don't proofread
Click to expand...
Click to collapse
Goes straight to battery charging.
johnny13oi said:
Try all the steps you stated but not the last one where you press the power button. Don't press the power button.
Click to expand...
Click to collapse
Goes straight to battery charging.
Pull out battery for 10 seconds, hold volume up + down, connect usb into other usb port.
Sent from my GT-I9000 using XDA App
Seriously, try adb. It works wonders.
Sent from my SAMSUNG-SGH-I897 using XDA App
10tonhammr said:
Have you tried rebooting into recovery mode instead of download mode? Stock recovery is adb-ready and you should be able to adb reboot download. Its a long shot if you're having problems using button combo to get to d/l mode, but it's probably still worth a shot at this point.
If you were able to use 3 button combos before all this happened, and did NOT have to install the 3 button combo fix, its strange you don't have access to it now... Could restoring a Rogers Cappy to AT&T stock be the problem?
Click to expand...
Click to collapse
Trying to get into recovery mode gets me the at&t logo and the "jingle", but no recovery mode menu to reboot, etc.
This is what I'm worried about, restoring the Rogers stock over top of the Odin 1 click restore (which is an AT&T image) has bricked it and prevents download mode from invoking.
fatttire said:
Seriously, try adb. It works wonders.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
I know, I played with adb before I bricked it. ADB needs to "see" the phone, it no longer sees it (I have three computers, all three can't see it, but they can see my friends cappy with no problems first time, every time). Same process for his phone works every time to get into download mode, but not on mine.
And yes, have tried other USB ports on the same computer, both on the mainboard, and on the front ports.
Keep the ideas coming though please, I will try every one.
timmy22 said:
I know, I played with adb before I bricked it. ADB needs to "see" the phone, it no longer sees it (I have three computers, all three can't see it, but they can see my friends cappy with no problems first time, every time). Same process for his phone works every time to get into download mode, but not on mine.
And yes, have tried other USB ports on the same computer, both on the mainboard, and on the front ports.
Keep the ideas coming though please, I will try every one.
Click to expand...
Click to collapse
There's a trick to prompt download mode through a "jig" which you can hack together for about $2 in parts and a sacrificial microUSB cable...it works on the other SGSes, but I think it should work on the Captivate as well. Never tried it personally...
Merlin_reloaded said:
There's a trick to prompt download mode through a "jig" which you can hack together for about $2 in parts and a sacrificial microUSB cable...it works on the other SGSes, but I think it should work on the Captivate as well. Never tried it personally...
Click to expand...
Click to collapse
I work in a tech shop so have access to electronics, sacrificial cables, soldering irons, resistors, caps, etc.... could you point me in the right direction?
Oh, nevermind, found it in the i9000 forum. Will test first thing in the morning!
Cheers,
I bricked one today as well. Exactly what you are talking about here. The only thing is that i was still under the 30days so i swapped it out for a new one. As of right now ive been debating whether i want to do the voodoo fix (which i think is what bricked it to begin with)
I Have the same problem I had installed 2.2 and saw that it had to many bugs, so I just tried to roll back to 2.1 and I thought the process was over because my phone was flashing my battery me witch was the little frozen circle and and empty battery meter, so I disconnected the phone cuz I thought it was done, took the battery out, put it back in and turned it on and the AT&T logo came on then black screen and it just kept doing that and wont even start up. now I cant even go back to recovery mode pressing volume up, down, together nothing, when I plug it in the computer or a/c outlet to charge it just shows me a blinking empty battery meter. pleassss help meeeee I'm freaking out! already read alot of forum but cant find it.
make a jig. and you posted in the wrong section.
read the whole thread. http://forum.xda-developers.com/showthread.php?t=841512
mdenisjr said:
I Have the same problem I had installed 2.2 and saw that it had to many bugs, so I just tried to roll back to 2.1 and I thought the process was over because my phone was flashing my battery me witch was the little frozen circle and and empty battery meter, so I disconnected the phone cuz I thought it was done, took the battery out, put it back in and turned it on and the AT&T logo came on then black screen and it just kept doing that and wont even start up. now I cant even go back to recovery mode pressing volume up, down, together nothing, when I plug it in the computer or a/c outlet to charge it just shows me a blinking empty battery meter. pleassss help meeeee I'm freaking out! already read alot of forum but cant find it.
Click to expand...
Click to collapse
Using your computer and usb cable, remove the battery from the phone. Plug the pc side of the cable into your pc. Put the battery back in the phone. Hold the volume up and volume down buttons. While holding the buttons, plug in the phone side of the usb cable and continue holding. You should be in download mode within a few moments. View my clip for a how-to video session on this...
Reply if this worked. It SHOULD work as you have soft bricked and this is a way of entering download mode during a soft brick of the phone.
http://www.youtube.com/watch?v=MsafJ-9uRqk
Look here this might help you.
USB jig
http://forum.xda-developers.com/showthread.php?t=819551
xredjokerx said:
make a jig. and you posted in the wrong section.
read the whole thread. http://forum.xda-developers.com/showthread.php?t=841512
Click to expand...
Click to collapse
This is your second option.
Any luck with suggested solutions?
nothing with just the buttons, but im fixing to buy the micro usb breakboard and see what happens
Or you can buy a JIG from me!
mdenisjr said:
nothing with just the buttons, but im fixing to buy the micro usb breakboard and see what happens
Click to expand...
Click to collapse
Did you try the volume button method with plugging in the USB cable into the phone while it's plugged into the computer? It sounds like you are just doing the volume buttons plus power button method. The JiG is for HARD bricks which doesn't sound like it's what you have. Although it will work for SOFT bricks also.
connexion2005 said:
Using your computer and usb cable, remove the battery from the phone. Plug the pc side of the cable into your pc. Put the battery back in the phone. Hold the volume up and volume down buttons. While holding the buttons, plug in the phone side of the usb cable and continue holding. You should be in download mode within a few moments. View my clip for a how-to video session on this...
Reply if this worked. It SHOULD work as you have soft bricked and this is a way of entering download mode during a soft brick of the phone.
Click to expand...
Click to collapse
First post, been lurking a while though. I actually had the same problem, and fixed it this way last night. Took me about 30 tries and lots of sweat before I figured it out though
connexion2005 said:
Did you try the volume button method with plugging in the USB cable into the phone while it's plugged into the computer? It sounds like you are just doing the volume buttons plus power button method. The JiG is for HARD bricks which doesn't sound like it's what you have. Although it will work for SOFT bricks also.
Click to expand...
Click to collapse
yeah I have been doing it with the cable connected to the computer and then hold down the buttons and connect the phone, but still all I see is the empty battery and black screen
mdenisjr said:
yeah I have been doing it with the cable connected to the computer and then hold down the buttons and connect the phone, but still all I see is the empty battery and black screen
Click to expand...
Click to collapse
how long did you hold the buttons up and down after you connected the cable? iv held it for 2 mins and nothing!
Ugh. This is the way to do the button combo:
Step 1 remove the battery, open odin3 the one click jh6.
Step 2 plug in the usb and hold the volume up, volume down, and power.buttons.
Step 3 put in the battery and release the power button but keep holding the volume up/down buttons.
Step 4 press download. This puts the phone in download mode. I found this method when I had a soft brick. Umyou don't need a jig since you can still boot to the white screen. This will work.
Sent from my GT-I9000M using XDA App
goob1284 said:
Ugh. This is the way to do the button combo:
Step 1 remove the battery, open odin3 the one click jh6.
Step 2 plug in the usb and hold the volume up, volume down, and power.buttons.
Step 3 put in the battery and release the power button but keep holding the volume up/down buttons.
Step 4 press download. This puts the phone in download mode. I found this method when I had a soft brick. Umyou don't need a jig since you can still boot to the white screen. This will work.
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
I will try this method, as I am in the same boat as the others here. I have already placed my order for the USB Jig but am hoping that this method will work.
However, under step 4, you indicate that you "press download." What do you mean by this? Where is the "download" button? On odin3, the only buttons I saw were start and master clear. Is the download button an option on the Captivate?
To my knowledge, there is no "Download" button on ODIN or a Captivate in a semi-bricked state.
Edit:
If those directions don't work, you might also try a method I've had success with.
1. Remove battery, SIM card, and MicroSD (if you have one) from the phone
2. Wait at least 10 seconds with the phone having no power source
3. Hold Vol Up/Down, don't let go
4. Insert battery
5. If it worked, in a few seconds you should see Download Mode
http://forum.xda-developers.com/showthread.php?t=867892
I posted some suggestions in this thread...
good luck, dont give up
Axura CE RC2.1 w/ excalibur 2.1.6, ugjk4 modem, Voodoo, BlackFroyo theme
I think Im really screwed I have done everything that has been posted previosly and nothing seem to work. as soon I connect to my computer odin3 dose not do anything it's as though nothing is connected and my phone goes to that empty battery with the frozen loading star or what ever its called, it also does that when I connect it to the AC outlet.
Still waiting on the jig to arrive I think thats my last hope!
Why doesn't anyone use adb to get into download? The only time you HAVE use the 3 button is if you get phone!Pc screen. If your phone can get to the att screen, open command prompt, change directory to adb tools location, and type adb reboot download. Do all this before you hook your phone up to the computer. When you're ready connect phone to pc, turn it on, right after you see the att splash screen and hear that your phone is connected press enter.
Sent from my GT-I9000M using XDA App
majinzen said:
Why doesn't anyone use adb to get into download? The only time you HAVE use the 3 button is if you get phone!Pc screen. If your phone can get to the att screen, open command prompt, change directory to adb tools location, and type adb reboot download. Do all this before you hook your phone up to the computer. When you're ready connect phone to pc, turn it on, right after you see the att splash screen and hear that your phone is connected press enter.
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
The button combo is soooo much easier than adb for newer people... And a lot quicker
Sent from my SAMSUNG-SGH-I897 using XDA App
goob1284 said:
The button combo is soooo much easier than adb for newer people... And a lot quicker
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
how do you use a adb to get into download mode? is there a link you can hook me up with instructions I would really appreciated it.
Got a new phone
This isn't really great advice, but, if the bootloader is toast, there is a good chance you can get it fixed under warranty as Samsung won't be able to tell what you had on it.
You could try making the jig as the parts are cheap, but not much chance if your cappy is unresponsive.
There is also the aftermarket jtag option. It's expensive, but should work. You may be able to find someone with it. Seeing as your reward offer is half the price of one, it probably wouldn't be out of line as far as somebody offering that service.
I am assuming you have already done this and just forgot to mention it but try pulling sd card and sim for a few. Pulling only the battery does not always work for me
Sent from my SAMSUNG-SGH-I897 using XDA App
did you get any error from ODIN while flashing? especially about sbl.bin?
Im having the same problem... totally black screen, no power...i have flashed million roms also and have always been able to restore from a soft brick..but this time it wont even boot to get into download mode..ive tried every single method to get into download mode with no luck..
att is going to send me a warrenty replacement so ..hopefully that goes well.. but ill continue messing with it and if i get a fix ill def post it for ya
open Odin,,remove battery ,wait 1 minute, put battery back in, press and hold both volume buttons, insert usb. Hope that helps. this is what i did when I black screened mine.
Where are you located?
There was one time I really screwed the pooch with Odin and my phone ended up with a black screen & unresponsive. The JIG did manage to pull me out of it, I'm very certain the "your mileage may vary" line is applicable here.
I heard that even if the screen is black if you see it in odin you can use it. I would use odin one click. Good luck.
Try this. Unplug and remove battery. Plug in the usb open odin3 jh6 one click downloader. Press and hold volume up/down and power. Insert battery and release only the power button at the same time and keep holding volume up/down buttons. Let drivers insall if they aren't on your computer. Press download.
Sent from my GT-I9000M using XDA App
goob1284 said:
Try this. Unplug and remove battery. Plug in the usb open odin3 jh6 one click downloader. Press and hold volume up/down and power. Insert battery and release only the power button at the same time and keep holding volume up/down buttons. Let drivers insall if they aren't on your computer. Press download.
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
Sorry I feel stupid. Dodnt read the 2nd thing. This should work. Is your battery fully charged? And try adb if your computer can see it at all. And use clockwordmod next time so much easier and safer. But if everything fails att covers our.phone for a year. I know cause I bricked.it and tried exchanging it.
Sent from my GT-I9000M using XDA App
Me too have same problem and I offer another 75 US$ for how can help me solve it, I try all the above combination and JIG also but nothing works .
Try:
Connect USB to PC
Open odin one click
press and hold volume down (not up)
Insert USB to phone
or
Connect USB to PC
Open odin one click
press and hold volume down (not up) + hold power
Insert USB to phone
From thekurrgan
Situations: phone-!-Computer / no download mode
Black Screen / RST_STATUS 0x0
Procedure:
1. Remove the battery, external SD card and SIM card.
2. Wait 10 seconds.
3. Open odin3
4. Connect usb cable.
5. Hold volume up + volume down + Power.
6. Insert battery.
7. Release POWER BUTTON ONLY.
You should now be in immediate download mode.
jhnstn00 said:
From thekurrgan
Situations: phone-!-Computer / no download mode
Black Screen / RST_STATUS 0x0
Procedure:
1. Remove the battery, external SD card and SIM card.
2. Wait 10 seconds.
3. Open odin3
4. Connect usb cable.
5. Hold volume up + volume down + Power.
6. Insert battery.
7. Release POWER BUTTON ONLY.
You should now be in immediate download mode.
Click to expand...
Click to collapse
Exactly what I said? He said it didn't work
Sent from my GT-I9000M using XDA App
http://db.tt/ugaNHRz
if you have not tried adb try this. Unzip to computer.
Run the script for reboot download.
Axura CE RC2.1 w/ excalibur 2.1.6, ugjk4 modem, Voodoo, BlackFroyo theme
jhnstn00 said:
http://db.tt/ugaNHRz
if you have not tried adb try this. Unzip to computer.
Run the script for reboot download.
Axura CE RC2.1 w/ excalibur 2.1.6, ugjk4 modem, Voodoo, BlackFroyo theme
Click to expand...
Click to collapse
I tried ADB. I am going to try a JIG today.
kennethpenn said:
I've flashed ROMs a hundred and a half times and been fine. Gotten myself out of a million soft-bricks. But, this time I think I'm screwed.
My screen and phone is totally powered-off black after I tried to flash I9000UGJK4.tar as PDA in Odin on my device.
I've tried:
1.) Holding vol buttons and plugging in USB
2.) Taking out battery, plugging in, holding volume buttons and power button, putting battery in while letting go of power button.
Nothing responds. Is the JIG going to work in this situation or is this a hard-brick? I read the JIG thread and he said if your screen is black it won't work so I'm just wondering.
Paypal - $75 to anyone who can make my phone work.
Click to expand...
Click to collapse
We need more info , is your pc detecting anything at all when connecting phone ?
like a sound or some unknown drivers ?
Plug the charger in the phone is something displayed ( like charging image)
hzeid said:
Me too have same problem and I offer another 75 US$ for how can help me solve it, I try all the above combination and JIG also but nothing works .
Click to expand...
Click to collapse
same questions as above .
jhnstn00 said:
From thekurrgan
Situations: phone-!-Computer / no download mode
Black Screen / RST_STATUS 0x0
Procedure:
1. Remove the battery, external SD card and SIM card.
2. Wait 10 seconds.
3. Open odin3
4. Connect usb cable.
5. Hold volume up + volume down + Power.
6. Insert battery.
7. Release POWER BUTTON ONLY.
You should now be in immediate download mode.
Click to expand...
Click to collapse
even tho you see nothing in the screen try to start Odin anyays see if it does something ..
jhnstn00 said:
http://db.tt/ugaNHRz
if you have not tried adb try this. Unzip to computer.
Run the script for reboot download.
Axura CE RC2.1 w/ excalibur 2.1.6, ugjk4 modem, Voodoo, BlackFroyo theme
Click to expand...
Click to collapse
well That is one of the reason why we need to know what happens when your phone is plugged in via USB ...
Here is my advice : unless you are experienced with the Jig ( you ve restored your phone at least once using it already ) I say try again and again
For example : these resistor sometimes have 5% variation so for me the 301k wasnt working had to put it at 300 otherwise it wouldnt work ..
would also like top point out the jig does trigger soemtign in your phone so again even if nothing shows up on the screen try to flash anyways ...
BTW you shoudl remove the bounty and just offer it once you have beenhelped , I doubt anyone here is in it for the money (except me of course ) j/k
For dead screen, try this. It sounds like voodoo but it got me going.
Remove the battery.
Open Odin.
Connect via USB
Plug the battery in.
Hold down POWER and VOLUP until you get RED text on the screen. This will look bad, but is in fact a good thing. This can take 20-30 seconds.
Once the red text is up, hold down BOTH VOL buttons and POWER. Again this part will seem to take too long, but the red text will go black after a bit.
When the red text goes black, let go of POWER but continue to hold down both VOL.
Welcome to download mode.
loraque said:
For dead screen, try this. It sounds like voodoo but it got me going.
Remove the battery.
Open Odin.
Connect via USB
Plug the battery in.
Hold down POWER and VOLUP until you get RED text on the screen. This will look bad, but is in fact a good thing. This can take 20-30 seconds.
Once the red text is up, hold down BOTH VOL buttons and POWER. Again this part will seem to take too long, but the red text will go black after a bit.
When the red text goes black, let go of POWER but continue to hold down both VOL.
Welcome to download mode.
Click to expand...
Click to collapse
Exactly how I fixed mine after stock flash idin gave me purple screen
Sent from my SAMSUNG-SGH-I897 using XDA App
loraque said:
For dead screen, try this. It sounds like voodoo but it got me going.
Remove the battery.
Open Odin.
Connect via USB
Plug the battery in.
Hold down POWER and VOLUP until you get RED text on the screen. This will look bad, but is in fact a good thing. This can take 20-30 seconds.
Once the red text is up, hold down BOTH VOL buttons and POWER. Again this part will seem to take too long, but the red text will go black after a bit.
When the red text goes black, let go of POWER but continue to hold down both VOL.
Welcome to download mode.
Click to expand...
Click to collapse
Never heard of this! Please make a post of this so I can make it a favorite. Might need this in the future. Good work.
Sent from my GT-I9000M using XDA App
I was flashing this 3 button fix with Clockworkmod recovery. After applying the update from zip, everything seemed to be working fine, so I pulled the battery so I could test it out without having to use CWR's reboot option, then waiting for it to boot and shut off. When I tried to turn it back on, nothing happened. I tried to boot it with the recovery 3 button combo and it didn't respond(still a completely black screen).
Also, I'm not sure whether or not CWR was actually flashed. I was accessing using the update.zip found in this thread. When booting into recovery, I got into the normal recovery screen, and it was only after I hit "reinstall packages" that I got into CWR. It was through this method that I tried to install the 3-button fix.
What I've tried:
This key combo: http://forum.xda-developers.com/showthread.php?t=775911
The phone didn't respond at all.
Switching the battery for a fully charged one. Still no response.
Inserted my homemade USB jig to no avail. I've tested it with a different Captivate and I've confirmed that it works.
Anyone got any ideas or "magic" key combos I should try. If not, would it be possible to send it into Samsung/AT&T and get it repaired/replaced?
EDIT: I think I'm in the same situation as these guys: http://forum.xda-developers.com/showthread.php?t=977086
It's a build 1008 that I'm working with.
I'm on a similar issue. Phone is dead, no response to anything at all. Not even my previous jig that I used last time.
But it happened while I was flashing with Odin one click. Got stuck at the factoryfs.rfs step. Had to unplug it but after that I never came back up
I ordered a premade usb jig, and it'll arrive next week. If that doesn't work then I'm thinking of getting a cheap one off ebay, I can't spend another $500 considering this phone is only 4 months old.
The other choice is getting a broken phone for even less money, and replace the motherboard. But I don't know if there are considerable differences between phone batches.
I'll be Android-less for the next two weeks though, and that truly sucks.
Which build is your phone? It's located behind the battery to the left of one of the barcodes. I've heard that 2010 and 2012 break when used with odin one click.
Have you guys tried the volume up and down trick right after you put battery back in while its connected by usb to the PC? I bricked my phone to the point where it would not even turn on and finally was able to get it back into download by using that method. Kind of tricky but you plug phone into usb to pc. Take battery out, while holding volume up and down put battery in and keep holding until download screen comes up. I hope that works for you, if you havent tried yet
I have gone so far as to brick my phone to the point where it would not turn on. After a few hours it was only a screen RST_STATUS 0x0. The one post you linked says to hold vol up/down and power. But try not pressing power..only up and down. I could not get mine to do anything until I tried someone else's method of not pressing power and only volume buttons
I had a soft brick last night. Phone would start with Phone ++ PC connect picture, nothing else. And here's what I did to get into Download:
- Pull SIM out
- Pull MicroSD out
- Pull Battery out
- Put Battery back in
- Hold Vol Down button (only the vol down)
- Plug USB cable in
- Phone boots into Download mode
The 3-button or Vol UP and DN key trick didn't work. Only the Vol DN and USB plug-in worked for me. I hope you have good luck.
My first time using Odin One Click presented me with a similar situation, stalled after it said "DO NOT UNPLUG..." ... I don't have a Jig but nothing else I tried was working...Held down power button to be presented with a black screen, no backlight or anything...
Pulled the battery out, waited a full 30 seconds (battery pulls less than that didn't work for me) and put it back in, Volume Up + Down and plugged in USB and it worked.
Best of luck to you. I was feeling kind of queasy after finding out my first attempt at flashing could have been disastrous.
If you are hard bricked and have no response even with a JIG, I can still fix it for you. Just PM me for questions...
This happened a few times to me. I remove the battery, open odin one click, hold up and down vol buttons, then plug in the usb cable. It typically throws me.back into dl mode. Be sure you are using JV6 (see Icezar's post in Dev section) when going back to stock because it doesnt include bootloaders and makes hard bricking less likely.
-- SGS i897 Captivate using:
Continuum 5.41 w/ Talon 1.7 [rfs all, OC/UV, TW4, no theme, no tweaks enabled, & NETFLIX!)
tigersunlimited said:
I had a soft brick last night. Phone would start with Phone ++ PC connect picture, nothing else. And here's what I did to get into Download:
- Pull SIM out
- Pull MicroSD out
- Pull Battery out
- Put Battery back in
- Hold Vol Down button (only the vol down)
- Plug USB cable in
- Phone boots into Download mode
The 3-button or Vol UP and DN key trick didn't work. Only the Vol DN and USB plug-in worked for me. I hope you have good luck.
Click to expand...
Click to collapse
Oh thank u so much worked like a charm, wow. U saved my Sammy!
tigersunlimited said:
I had a soft brick last night. Phone would start with Phone ++ PC connect picture, nothing else. And here's what I did to get into Download:
- Pull SIM out
- Pull MicroSD out
- Pull Battery out
- Put Battery back in
- Hold Vol Down button (only the vol down)
- Plug USB cable in
- Phone boots into Download mode
The 3-button or Vol UP and DN key trick didn't work. Only the Vol DN and USB plug-in worked for me. I hope you have good luck.
Click to expand...
Click to collapse
Gosh!! you are genius!! Even USB was not working but you save my captivate.
Bricked Samsung galaxy s2 i1900t
connexion2005 said:
If you are hard bricked and have no response even with a JIG, I can still fix it for you. Just PM me for questions...
Click to expand...
Click to collapse
Hi
I tried upgrading from ice cream sandwich to jellybean and ended up bricking my phone when the flashing failed and I panicked and unplugged my phone. I think it failed because i was flashing something for a different model rather than the i1900t as this is the New Zealand/Australian model. I cant find any button combos that will put my phone into download mode and the phone doesn't turn on. The only life that it seems to exhibit is get warm around the sim card area when i put the battery in. Help.
drdigby said:
Hi
I tried upgrading from ice cream sandwich to jellybean and ended up bricking my phone when the flashing failed and I panicked and unplugged my phone. I think it failed because i was flashing something for a different model rather than the i1900t as this is the New Zealand/Australian model. I cant find any button combos that will put my phone into download mode and the phone doesn't turn on. The only life that it seems to exhibit is get warm around the sim card area when i put the battery in. Help.
Click to expand...
Click to collapse
Download mode is vol down+power on the GB bootloaders. But if a JIG doesn't get you in download mode, there are 2 possible reasons: 1st- Battery isn't charged. 2nd- Your phone is bricked.
If it's the 2nd one then your only hope is with mobiletechvideos .com (Connexion2005 on xda). He can use his JTAG to push the GB bootloaders into your phone.
hard bricked samsung captivate....3 buttons not working
connexion2005 said:
If you are hard bricked and have no response even with a JIG, I can still fix it for you. Just PM me for questions...
Click to expand...
Click to collapse
hi I hard bricked my handset Samsung captivate sgh i897 while flashing only the pit file with odin......after which I get a black screen and the 3 buttons not working......will you kindly guide me in unbricking
Hey guys, I need some help...
Long story short, I wanted to restart my phone one day after a Market app wasn't working, and when I turned it back on, it would load the ATT screen, show the Galaxy S screen as well, but then the screen turns black and about every 15-20 seconds, there would be 1 vibrate, a pause, 2 consecutive vibrates, and this would continue to go on forever until I took out the battery or the phone died. I had 2.2 but cannot get into recovery mode or download mode, even with the 3 button combo. Am I screwed?
Thanks for your guys's help!
kenwang2688 said:
Hey guys, I need some help...
Long story short, I wanted to restart my phone one day after a Market app wasn't working, and when I turned it back on, it would load the ATT screen, show the Galaxy S screen as well, but then the screen turns black and about every 15-20 seconds, there would be 1 vibrate, a pause, 2 consecutive vibrates, and this would continue to go on forever until I took out the battery or the phone died. I had 2.2 but cannot get into recovery mode or download mode, even with the 3 button combo. Am I screwed?
Thanks for your guys's help!
Click to expand...
Click to collapse
You probably need to build/buy a jig and use that to get to download mode. Otherwise, try this:
Take out battery
Plug in usb cable
Hold volume+ and volume-
Pop in battery
This should take you straight into download mode. You'll could try doing a factory reset while in download mode but you'll probably just have to flash a new ROM/Stock Image
Red_81 said:
You probably need to build/buy a jig and use that to get to download mode. Otherwise, try this:
Take out battery
Plug in usb cable
Hold volume+ and volume-
Pop in battery
This should take you straight into download mode. You'll could try doing a factory reset while in download mode but you'll probably just have to flash a new ROM/Stock Image
Click to expand...
Click to collapse
I agree with this technique, although in my experience, you should hold down both volume buttons BEFORE plugging in the usb cable to your phone. It should take you right to download mode, and from there, I'm sure you know your way around. Best of luck.
RooterBooter said:
I agree with this technique, although in my experience, you should hold down both volume buttons BEFORE plugging in the usb cable to your phone. It should take you right to download mode, and from there, I'm sure you know your way around. Best of luck.
Click to expand...
Click to collapse
Actually that particular order doesn't matter. It works both ways. All that matters is when the phone receives power (battery put it) it has the USB signal, the vol+ signal, and the vol- signal.