Related
Has anyone tried using these snap on hard crystal cases on their Tmobile wing or HTC heralds?
does it stay on real tight?
http://4ustuff.com/info.php?itno=1763
decent quiality
i just bought mines from daydeal.com and the quality isnt bad it connects well and isnt very loose and you can choose from different colors at daydeal.com i got the smoke grey but the belt clip attachment isnt very good feels kinda loose wen clippin to pants
I didn't like the one I received.
It fits fine and the parts are all usable but there's no protection for the screen and while it'll keep things looking pretty, it provides no shock protection. All it really does is make the phone bigger.
Oh... and forget using any extended batteries.
Does any one know if this case fits the original p4350 Herald (non-wing). The camera position and front buttons are different.
I like the crystal cover I purchased off of ebay. As one of the posters replied it doesn't have a protective cover for the screen. I also purchased a metal case and love it. It came with a small plastic for the screen. Only minor drawback is, I must open the door to use touch screen, nothing major.
Smoke362 said:
I like the crystal cover I purchased off of ebay. As one of the posters replied it doesn't have a protective cover for the screen. I also purchased a metal case and love it. It came with a small plastic for the screen. Only minor drawback is, I must open the door to use touch screen, nothing major.
Click to expand...
Click to collapse
Can you post a link to where people can find it?
Like when you move an icon from one home screen to another, you slide it to the edge and wait. I've tried a few different cases and they all have such a high edge on them taht they inhibit my thumb/finger's ability to go all the way to the edge of the screen - making it virtually impossible to move an icon.
The bigger issue is that it affects my typing when trying to quickly swype through the "P" or "Q", etc.
So...anyone have a case with a very low profile..allowing your finger to glide over that are similar to a case-less phone? I rarely, if ever, see that being discussed when cases are talked about.
I too am interested in what people have to say about this. I have a 2-piece hard case i don't use because it prevents me from using Swype effectively, so i just resorted to the Zagg full-body screen and avoid putting things in my pocket alongside my phone lol
I just use the verizon high gloss black case. it's a great fit. I actually had the body glove before but moved down to this one... don't drop my phone so I don't feel a need for a huge case ya know? I can now use swype and drag effectively as well.
Is the verizon case a two piece snap on or a flexible pull on?
Try the 'ElCheapo' in my sig.. swype works GREAT with it.
magicmycote said:
Is the verizon case a two piece snap on or a flexible pull on?
Click to expand...
Click to collapse
The Verizon case is a one piece flexible pull on.
I does have the raised lip you are talking about but it is not as pronounced as some of the aftermarket cases I've seen.
Here is one on eBay (this is the one I bought).
Verizon HTC Incredible Black Silicone Gloss Cover OEM
Just a side note...
When moving items from one screen to the other, I find it hard even without a case. A solution that works for me is to press the item you want to move and then use the virtual trackball to move from one screen to the other.
gadget!
gadget! said:
The Verizon case is a one piece flexible pull on.
I does have the raised lip you are talking about but it is not as pronounced as some of the aftermarket cases I've seen.
Here is one on eBay (this is the one I bought).
Just a side note...
When moving items from one screen to the other, I find it hard even without a case. A solution that works for me is to press the item you want to move and then use the virtual trackball to move from one screen to the other.
gadget!
Click to expand...
Click to collapse
not that I'm moving icons around constantly, but this will definitely help me, thanks!
http://www.verizonwireless.com/b2c/store/accessory?action=accessoryDetails&archetypeId=12056&page=1
I have never had any troubles with swype while using this case. It covers no section of the screen and grips onto the small outer edge of the phone. Works like a charm!
I also hate hitting my case when swyping the screen. I find that the argile design case from amzer.com works best for me and I've been using it for a month.
Sent from my ADR6300 using XDA App
admittedly, I don't have my DInc just yet but I ordered/received the Seidio Innocase Actice II for HTC Incredible... It came with a cardboard insert that mimics the phone actually being inside of it... The edges on this case seem to be really low profile and with this cardboard insert my finger can easily glide off edges.
You can get find an in-motion view of the same case for Evo on Youtube—I can't link as I am a n00b
My DInc is coming tomorrow so I will update with results but with the silicone edges and a slight inner bevel to this I think it may be what you're looking for... case features an outer exoskeleton that protects back and corners for more protection than just the silicone material could offer.
UgXvibe said:
Try the 'ElCheapo' in my sig.. swype works GREAT with it.
Click to expand...
Click to collapse
Thanks a bunch for this. Handhelditems.com is amazing!! I just ordered two "ElCheapo" skins and a 3-pack of screen protectors with express shipping (3-5 days) shipping for $15. I've seen a good review of the screen protectors and I think I'll wind up being very pleased for the money.
I used the 30% off coupon code found at http://www.techbargains.com/vendor_detail.cfm/596/Hand-Held-Items-coupon-code
Seidio Active case is pretty much non-intrusive...with good access to the screen.
http://forum.xda-developers.com/showpost.php?p=7424801&postcount=6
UPDATE...
Swype beta appears to be closed but I've had my phone and Seidio Innocase Active for a few weeks now and I think this case will work just fine with Swype and the edge issue you mentioned.
Silicone case from best buy. Just for a red one today.
Sent from my ADR6300 using XDA App
the Barely There case by Case-Mate is the best i've seen thus far. I absolutely love mine. Though the face of the screen isn't protected very well, the corners and back are. Its material feels the same as the battery cover on the back of the device. It looks nice and is very comfortable.
http://www.case-mate.com/HTC-Droid-...e-HTC-Droid-Incredible-Barely-There-Cases.asp
vantagejuan said:
Thanks a bunch for this. Handhelditems.com is amazing!! I just ordered two "ElCheapo" skins and a 3-pack of screen protectors with express shipping (3-5 days) shipping for $15. I've seen a good review of the screen protectors and I think I'll wind up being very pleased for the money.
I used the 30% off coupon code found at http://www.techbargains.com/vendor_detail.cfm/596/Hand-Held-Items-coupon-code
Click to expand...
Click to collapse
Well, I just got my cases and screen protectors yesterday. The cases are fantastic for the price. The screen protectors on the other hand were all cut to big and left bubbles after applying them, so I'm having them send me new ones. At least it was only $4 for all three.
I picked up the Spect case from my local VZW yesterday. I had the faded black/red from vzw and I hated the sides on it.. I wanted a one piece, not a 2 piece..
well this one is friggin awesome. The sales folks working there had never heard/seen the case before and In the 30 minutes I was in the store, 4 employees bought it after playing with it on my phone and 2 additional customers bought it as well. its a one piece design and the interior is cloth so it wont scratch up the screen. I dont have an issue with Swype as it doesn't cover the front at all.
Well worth checking out...
Innocase ii here, no issues at all.
vantagejuan said:
Well, I just got my cases and screen protectors yesterday. The cases are fantastic for the price. The screen protectors on the other hand were all cut to big and left bubbles after applying them, so I'm having them send me new ones. At least it was only $4 for all three.
Click to expand...
Click to collapse
Your welcome! What colors did you get? I got the black first then ordered the Burgundy later on.. I was kinda hoping it would be a bit darker though.
Did they give you any kinda application fluid for the screen protectors?
mattymo said:
the Barely There case by Case-Mate is the best i've seen thus far. I absolutely love mine. Though the face of the screen isn't protected very well, the corners and back are. Its material feels the same as the battery cover on the back of the device. It looks nice and is very comfortable.
http://www.case-mate.com/HTC-Droid-...e-HTC-Droid-Incredible-Barely-There-Cases.asp
Click to expand...
Click to collapse
Those look nice. I'm going to look into those. Thanks
They just came out so I don't expect miracles but I figured that one of these stretch rubber kind might fit it. However, I hate to add more thickness to the phone so does anyone know of an extra thin one?
You can try a i9023 case as I believe the super LCD Nexus are slightly thicker than the i9020s. I'm not too sure if the thickness is the same as the sprint versions though.
Sent from my Nexus S using XDA App
The sprint store has a few gel cases that are thin. People are also reporting that the CaseMate Pop fits the 4G.
Has anyone gotten this case:
http://shop2.sprint.com/NASApp/onli...=Carry+&+Protect&selectedAccessoryID=CZS0566R
How is it? what's the fit like. Can you post some pics?
I went with the Incipio Feather case. Its the thinest I know of.
http://www.myincipio.com/Google-Nexus-S-Cases-Accessories/Incipio-Samsung-Google-Nexus-S-feather-Ultralight-Hard-Shell-Case.asp
Does it snap on well on the NS4G?
Sent from my Nexus S 4G using XDA App
obsanity said:
Does it snap on well on the NS4G?
Click to expand...
Click to collapse
It hasn't shown up yet so I wont know for another day or 2. Users on other forums have confirmed that it fits well.
As reported in other thread incipio case fits NS4G without problems, the only "complaint" is that the cutout for power button is not centered but lowered, still it doesn't affect/press the button.
Mine came cracked at the bottom, called incipio, they're sending a new one.
i got this case and its a pain to press the power button
http://shop2.sprint.com/NASApp/onlinestore/en/Action/OSBrowseAccessoriesDetail?categoryRefName=Carry+%26+Protect&PHONE_ID=SPHD720KIT&selectedAccessoryID=CZS2033R&topPageNumber=0&subPageNumber=0
wish power was on top rather then on the side .. i usually change the volume when trying to turn on volume with my other fingers.
My wife wants this case but i dont believe that it will fit on the 4g version
http://cgi.ebay.com/Samsung-Nexus-S...706558?pt=PDA_Accessories&hash=item48406faf7e
even though it says it does
all the other ones on ebay say they wont fit
Honestly I had the hard case from best buy and it fit my ns4g better than my tmo ns Im sure any hard case will work with it. That said dont get the platinum hard case from best buy it is garbage. Those gel cases from sprint seemed about the same thickness as the best buy hard case it hit the holster perfectly but i didnt put one on the phone. Instead I went with this
http://shop2.sprint.com/NASApp/onli...ryID=CHS8564R&topPageNumber=0&subPageNumber=0
I am very happy with this case it fastens together very securly and fit even with the invisa-sheild
When I got my ns4g I had the same problem so I got both a red incipio feather and the case/holster combo from sprint
http://shop2.sprint.com/NASApp/onli...ryID=CHS8564R&topPageNumber=0&subPageNumber=0
The incipio fits fine minus the fact that power button is a little off but its really not a problem or a deal breaker. The case from sprint works great and isn't too bulky either, though not as thin as the incipio case. I personally would suggest both.
Sent from my Nexus S 4G using XDA App
myeyez said:
The sprint store has a few gel cases that are thin. People are also reporting that the CaseMate Pop fits the 4G.
Click to expand...
Click to collapse
Just a heads up. The gel case at the Sprint store sucks.. It's so tight you barely have to touch the phone to turn it on, or key a volume key.. It's really awkward pressing buttons through a layer of gel.
obsanity said:
Has anyone gotten this case:
http://shop2.sprint.com/NASApp/onli...=Carry+&+Protect&selectedAccessoryID=CZS0566R
How is it? what's the fit like. Can you post some pics?
Click to expand...
Click to collapse
Here you go, the phone was very thin to begin with [Coming from an evo mind you] so i wanted to add some bulk using the case, but it doesn't add much at all...very little
http://i98.photobucket.com/albums/l274/XxSydenxX/IMG_1621.jpg
http://i98.photobucket.com/albums/l274/XxSydenxX/IMG_1619.jpg
http://i98.photobucket.com/albums/l274/XxSydenxX/IMG_1618.jpg
http://i98.photobucket.com/albums/l274/XxSydenxX/IMG_1617.jpg
http://i98.photobucket.com/albums/l274/XxSydenxX/IMG_1612.jpg
XxsydenxX said:
Here you go, the phone was very thin to begin with [Coming from an evo mind you] so i wanted to add some bulk using the case, but it doesn't add much at all...very little
http://i98.photobucket.com/albums/l274/XxSydenxX/IMG_1621.jpg
http://i98.photobucket.com/albums/l274/XxSydenxX/IMG_1619.jpg
http://i98.photobucket.com/albums/l274/XxSydenxX/IMG_1618.jpg
http://i98.photobucket.com/albums/l274/XxSydenxX/IMG_1617.jpg
http://i98.photobucket.com/albums/l274/XxSydenxX/IMG_1612.jpg
Click to expand...
Click to collapse
Yeah.. This is the sucky gel case I threw in the trash. Very annoying to operate the power button and volume keys through that layer of gel.
Well... I've successfully tried ALL available cases for the NS4G now, and I'll say this... they ALL suck. All of them. I hope some decent offerings become available soon.
droidmage said:
Honestly I had the hard case from best buy and it fit my ns4g better than my tmo ns Im sure any hard case will work with it. That said dont get the platinum hard case from best buy it is garbage. Those gel cases from sprint seemed about the same thickness as the best buy hard case it hit the holster perfectly but i didnt put one on the phone. Instead I went with this
http://shop2.sprint.com/NASApp/onli...ryID=CHS8564R&topPageNumber=0&subPageNumber=0
I am very happy with this case it fastens together very securly and fit even with the invisa-sheild
Click to expand...
Click to collapse
How does this phone fit the ZAGG Invisashield? Does it match up well with the power buttons etc?
Thanks!
The Incipio Feather case is perfect. Nice matte black finish, feels great in hand, and us thin, but still overlaps the top of screen which is great.
I know it fits slightly off on my 4G version but that's barely noticable. Looks awesome.
I have the Feather case on my EVO as well, but it does not come up and overlap top of screen, it only goes up 90% on the sides which I do not like. Wish it was designed same as the Nexus-S version.
Sent from my EVO 4G "Myn's RS 5"
styckx said:
Just a heads up. The gel case at the Sprint store sucks.. It's so tight you barely have to touch the phone to turn it on, or key a volume key.. It's really awkward pressing buttons through a layer of gel.
Click to expand...
Click to collapse
Thanks for the heads up.
The clear argyle gel case is what I have. Yes, in the beginning it was a pain in the ass to push the buttons. I tried a little cutting on the case and now it's not so difficult to deal with. I got a brand new exacto knife blade with a tip blade. I put the case on the phone and gently made a surface mark on the top, bottom, left and right of where the buttons actually are. The volume seemed centered correctly but the power wasn't. Anyways, I made my marks with the tip of the knife so I knew where to cut. I went about a millimeter farther than I needed to go on the borders. I removed the phone and put something the same thickness as the phone on the inside of the gel to give me some leverage to carefully make the cutouts in the gel. I didn't try to cut it all in one shot. I made many passes on the line I was cutting until I managed to go all the way through. It doesn't look stock and it's not ocd perfect but it got the job done and the case is still strong. I originally got the two piece with the holster at sprint but I didn't like it quickly when holding it in my hand with a flat palm, the phone would slide down easily in my hand. I was too afraid of that adding to the chance it might fall out of my hand. The gel is still strong, covers all the phone, has a lip on the front where the screen is so it's not flush on the screen and it doesn't interfere with a zagg screen protector. I could post pics if anyone is interested in seeing it.
herbthehammer said:
The clear argyle gel case is what I have. Yes, in the beginning it was a pain in the ass to push the buttons. I tried a little cutting on the case and now it's not so difficult to deal with. I got a brand new exacto knife blade with a tip blade. I put the case on the phone and gently made a surface mark on the top, bottom, left and right of where the buttons actually are. The volume seemed centered correctly but the power wasn't. Anyways, I made my marks with the tip of the knife so I knew where to cut. I went about a millimeter farther than I needed to go on the borders. I removed the phone and put something the same thickness as the phone on the inside of the gel to give me some leverage to carefully make the cutouts in the gel. I didn't try to cut it all in one shot. I made many passes on the line I was cutting until I managed to go all the way through. It doesn't look stock and it's not ocd perfect but it got the job done and the case is still strong. I originally got the two piece with the holster at sprint but I didn't like it quickly when holding it in my hand with a flat palm, the phone would slide down easily in my hand. I was too afraid of that adding to the chance it might fall out of my hand. The gel is still strong, covers all the phone, has a lip on the front where the screen is so it's not flush on the screen and it doesn't interfere with a zagg screen protector. I could post pics if anyone is interested in seeing it.
Click to expand...
Click to collapse
I'm interested. I'm a little OCD... but I'm coming from the EVO and it just feels like the NS is like a bar of wet soap that I'm going to drop, and I have no rope.
Since there is no barely there case can anyone tell me what is a good thin case?
Incipio Feather for the regular Nexus S is probably the closest thing to what you're looking for. It will fit the 4g, but the power button cutout is a little off center. Doesn't really bother me at all, though--I really like the case.
Off center is fine as long as it fits
No white? Blue it is
Thanks
Sent from my Nexus S 4G using XDA App
I have a feather too. Great case, doesnt completely cover the top n bottom of the phone but it doesnt bother me.
I jus ordered a feather. Hopefully it will be here soon. Thinness I can find
Update. Feather came today. Looks very nice. Volume is off center and I had to ever-so-slightly trim it. Very nice. Thin, feels better in my hand. $16 on eBay for the black one.
a picture is like 1000 words ...
Taken w my wife's epic 4g. Hard to snap great pics and hold it lol. Very happy w the case after the slight trim where the volume is.
Still sexy thin?
Sent from my Nexus S 4G using XDA App
Pretty nice .. Thank you for the pictures.
i bought a red feather case black was sold out at the time and thought red would be a nice change. Turns out i didn't like the red, i used RIT dye and dyed it black using a trick i remembered from my diamond years ago, came out very well. Got bored and started to use sandpaper to give it some texture, after about an hour i have a silver case with black Incipio engraving.. pretty nice. Finished off with smooth straight strokes with sandpaper. Ended up with a fairly good looking stainless steelish case.
donsh00tmesanta said:
Still sexy thin?
Click to expand...
Click to collapse
Couldn't help thinking that you asked about his wife or his phone
Search first, looks very nice!
I ordered the green one the other day , not sure how well it can protect it other then scratches from the back.
I plead the fif
suksit said:
Couldn't help thinking that you asked about his wife or his phone
Click to expand...
Click to collapse
Sent from Oxygen 2.3.2 powered Nexus S 4G
I just ordered one of these puppies for my nused Nexus S 4G.
Smuuv said:
I just ordered one of these puppies for my nused Nexus S 4G.
Click to expand...
Click to collapse
Post pics when you get it?
searchfirst said:
i bought a red feather case black was sold out at the time and thought red would be a nice change. Turns out i didn't like the red, i used RIT dye and dyed it black using a trick i remembered from my diamond years ago, came out very well. Got bored and started to use sandpaper to give it some texture, after about an hour i have a silver case with black Incipio engraving.. pretty nice. Finished off with smooth straight strokes with sandpaper. Ended up with a fairly good looking stainless steelish case.
Click to expand...
Click to collapse
Good job man!
donsh00tmesanta said:
Post pics when you get it?
Click to expand...
Click to collapse
I wrote a short review and posted it to my site (site has affiliate and non-affiliate link) along with 11 pictures. Here is a copy of the review.
Here is the case, the Incipio Feather Ultra Thin Case, I just purchased for my Nexus S 4G from Amazon. As you can see by the pictures, the case definitely lives up to its name, it is very thin and also very light. I’ve only owned it for an hour so I will not be able to report on its durability, nor will I drop my phone to test it.
The case is easy to put on and has a snug fit. The holes for the volume buttons, camera, flash and speaker line up perfectly. However, this case was designed for the Nexus S so the hole for the power button doesn’t match perfectly but doesn’t interfere with its operation. I’m able to wake and power the phone on/off easily. The case is open at the bottom and shouldn’t obstruct the use with the mini-usb and headphone jack with a dock.
It feels a little slick but not as slick as the back without a cover. I can’t feel a discernible difference in the weight and size of the phone with the case on. I can imagine this will prevent a lot of the small dings and scratches but wouldn’t offer much protection if you drop your phone. I usually buy cases for my phone but end up taking them off because of the added bulk. For me, this one is a keeper.
Non-affiliate
http://www.amazon.com/Incipio-Googl...NQLW/ref=sr_1_1?ie=UTF8&qid=1324675257&sr=8-1
I think Ringke is the best case for 4g. Nice texture, good protection, looks good and fits phone perfectly. This case surpassed all my expectations.
Hi all
This is the only case I've seen so far, not in stock yet.
http://www.mobilefun.co.uk/sony-xperia-t-sma6122b-hard-shell-black-p36161.htm
Any more about ?
There are a few on Amazon UK, you seem to need to search for ""xperia t" case" to get them to come up, perhaps because they are so new and not ranked correctly in search
Ordered a TPU one.
Sent from my Nexus 7 using Tapatalk 2
I got mine on eBay.
Check This, http://www.krusell.se/en/products/mse
Could you guys that have already got cases, post a review/some pictures?
I'm on the look out for a good case and I'm sure others would appreciate it too.
LadFromWales85 said:
There are a few on Amazon UK, you seem to need to search for ""xperia t" case" to get them to come up, perhaps because they are so new and not ranked correctly in search
Ordered a TPU one.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Many thanks, ordered the smoke black TPU case from Amazon. Will let people know what it's like when I get it.
jonsmith709 said:
Many thanks, ordered the smoke black TPU case from Amazon. Will let people know what it's like when I get it.
Click to expand...
Click to collapse
Ordered this so far..
http://www.ebay.co.uk/itm/TPU-GEL-RUBBER-CASE-FOR-SONY-XPERIA-T-CLEAR-BLACK-/290774906437?pt=UK_MobilePhones_MobilePhonesCasesPouches&hash=item43b388f645
got a black S line case as well..though it seems bit flimsy on the sides and constantly snapping around when u use the screen.
powerhdlte said:
ROCK Naked shell Case For Xperia T
Click to expand...
Click to collapse
This looks like it may be the best of the bunch thus far. Gonna order one this weekend.
Got this one also from MobileFun.
I'm hoping a better quality TPU case will come along.
The one I mentioned above from Amazon does the job but its not a good fit. There is a clear gap near the headphone socket viewed from the front, and it doesn't sit flush along the front bottom.
Will keep it safe for now though
Sent from my Nexus 7 using Tapatalk 2
Just reposting something I posted in another thread.
I bought a Terrapin Solid Black Hybrid Rubberised Back Cover / Case / Shell / Shield + 6-in-1 Screen Protector Pack for Xperia T from Amazon and it arrived almost a week earlier than estimated (2 days delivery!)
Best bit is it was only £4 so it's amazing value for money. It doesn't feel cheap at all and the material feels very smooth with a matte finish. Almost the same texture as the T's back case. The fit is perfect too - it snaps on to either sides of the phone with only openings at the top and bottom and the device feels very secure in the case.
The aforementioned sides of the case also raise slightly higher (about a mm or so) than the screen so if you were to rest the phone on a flat surface face down the screen never touches. In regards to accessing the side buttons (Power, Volume controls and Camera button) they're all very easy to press - unless you have fat fingers or overgrown nails.
I highly recommend getting one from Amazon since the delivery came earlier than expected and even if you want something more protective (leather flip case, bumper etc) this is only £4 and makes a great temporary case.
Link to the case can be found herehttp://www.amazon.co.uk/gp/aw/d/B009HRVW7W/ref=mp_s_a_4?pi=SL75&qid=1350000465&sr=8-4
Links to photos I took can be found here.
https://www.box.com/shared/cdk3hwzm0s9tkx98cubb
My apologies if the photos aren't very clear. They were taken with my girlfriend's iPhone 4 - at night - in the kitchen. If you want I can take a few outside tomorrow morning in the sunlight at whatever angles you want. As you can see the case hardly adds any bulk to the phone - about 1.5 mm either side and 1.5 mm on the back.
The Rock naked case is really nice, have no issues with it so far and looks great.
Just bought the Krussel one, very handsome, well fiting and comfortable touch...I really like it and don't regret my money...
Next week i gonna get my Xperia T and i gonna order this case
http://www.ebay.nl/itm/Protect-Sili..._PDA_Taschen_Schutzhüllen&hash=item3f1caf26d3
love the design :good:
Quick question: What kind of case is best for impact protection, a hard case or a TPU case? Also, how badly will each type affect the phone's ability to cool itself? I've never used a case for my phones before, and I'm kind of worried about exposing the softer TPU case to the hot afternoon sun when I use my phone as a GPS, so I would like some advice if possible.
Anderone said:
Just reposting something I posted in another thread.
I bought a Terrapin Solid Black Hybrid Rubberised Back Cover / Case / Shell / Shield + 6-in-1 Screen Protector Pack for Xperia T from Amazon and it arrived almost a week earlier than estimated (2 days delivery!)
Best bit is it was only £4 so it's amazing value for money. It doesn't feel cheap at all and the material feels very smooth with a matte finish. Almost the same texture as the T's back case. The fit is perfect too - it snaps on to either sides of the phone with only openings at the top and bottom and the device feels very secure in the case.
The aforementioned sides of the case also raise slightly higher (about a mm or so) than the screen so if you were to rest the phone on a flat surface face down the screen never touches. In regards to accessing the side buttons (Power, Volume controls and Camera button) they're all very easy to press - unless you have fat fingers or overgrown nails.
I highly recommend getting one from Amazon since the delivery came earlier than expected and even if you want something more protective (leather flip case, bumper etc) this is only £4 and makes a great temporary case.
Link to the case can be found herehttp://www.amazon.co.uk/gp/aw/d/B009HRVW7W/ref=mp_s_a_4?pi=SL75&qid=1350000465&sr=8-4
Links to photos I took can be found here.
https://www.box.com/shared/cdk3hwzm0s9tkx98cubb
My apologies if the photos aren't very clear. They were taken with my girlfriend's iPhone 4 - at night - in the kitchen. If you want I can take a few outside tomorrow morning in the sunlight at whatever angles you want. As you can see the case hardly adds any bulk to the phone - about 1.5 mm either side and 1.5 mm on the back.
Click to expand...
Click to collapse
Got this today and its fantastic, well made and really suits the phone
Glad you like it. I haven't found anything better yet, which could be a good thing - it really is a nice case.
That said, I sent a message to Incipio on their facebook site and I got a response to keep an eye out on their company website in the next 2 weeks or so... I like their other Sony smartphone cases. Another great company is Krusell, they already have cases for Xperia T but they don't seem to deliver to the UK.
Sent from my LT30p using xda app-developers app
http://www.ebay.com/itm/SONY-XPERIA..._MobilePhonesCasesPouches&hash=item19d5f54b80
http://www.obostore.com/rock-big-ci...xperia-t-case-p-10396-c-238.html#.UIYwGrT9Fss
http://www.ebay.com/itm/NEW-GENUINE..._MobilePhonesCasesPouches&hash=item2a247aca69
I got my Rock case last week, and I have to say I love it. It feels tough, while not being obtuse or overbearing size wise. The edges on the screen side are tall enough to prevent the phone from resting on the screen itself when turned over, but don't stick up too much to be in the way.
Yeah I have the white Rock case and it's easily one of the nicest cases I've seen