Database Develop

Bricked Galaxy Tab

Hi,
I did a big mistake and bricked my galaxy tab I guess.
What I've done:
- I rooted the device on stock firmware (XXJID)
- I tried to run the voodoo lagfix, afterwards i couldn't boot. Couldn't even start the recovery mode.
- I flashed the firmware(XXJID) with 909pit. -> No booting, just the samsung logo.
- I flashed a galaxy s firmware( I know that this was a very bad idea )
Click to expand...
Click to collapse
The only reaction from my tab is turning on the camera led for a few seconds if I hold the power button.
Odin3 still adds the sgt but flashing changes nothing.
I hope someone can help me. Thanks in advance.
(In thread "density changer tool killed my samsung pad p1000 (solved)" are some more information. I cannot link, because I'm a new user)

Same here
Something similar here (I tried One click lag fix apk).
I tried flashing the same rom I had before but without success.
Now I have this message:
Can not mount / dev/block/stl10 (Invalid argument)
copy_dbdata_media: Can not mount DBDATE
Not Prepared your storage yet, please use UI menu for format and reboot actions
default copy....
I can enter Download mode but nothing more.
Anyone?
Thanks.
Nype said:
Hi,
I did a big mistake and bricked my galaxy tab I guess.
What I've done:
The only reaction from my tab is turning on the camera led for a few seconds if I hold the power button.
Odin3 still adds the sgt but flashing changes nothing.
I hope someone can help me. Thanks in advance.
(In thread "density changer tool killed my samsung pad p1000 (solved)" are some more information. I cannot link, because I'm a new user)
Click to expand...
Click to collapse

patomas said:
Something similar here (I tried One click lag fix apk).
I tried flashing the same rom I had before but without success.
Now I have this message:
Can not mount / dev/block/stl10 (Invalid argument)
copy_dbdata_media: Can not mount DBDATE
Not Prepared your storage yet, please use UI menu for format and reboot actions
default copy....
I can enter Download mode but nothing more.
Anyone?
Thanks.
Click to expand...
Click to collapse
Does Kies connect when you are in download mode?
Have you tried to reinstall JHA firmware selecting re-partition?

Which pit file?
zerocool76 said:
Does Kies connect when you are in download mode?
Have you tried to reinstall JHA firmware selecting re-partition?
Click to expand...
Click to collapse
Kies starts when I connect the TAB then in does not find the TAB (I think was so also before). I've tried various firmware not JHA. Which pit file should I use?
Thanks
EDIT: I see that in this firmware there's hope: it contains dbdata.rfs. I'll try, but witch pit file?

This time is bricked...
Today it is not a lucky day!
Before trying to flash again I've decided to make a NAND Dump using odin.
Right in the middle my wife has powered off the computer (no comment). I didn't think it could happen during a dump, but... now:
- when disconnected the TAB is completely black
- when I connect the TAB to the charger I have a drawing of a phone and a computer with a "!" between
- when I connect to te computer the screen remain black and ODIN nor Kies find the connection
Any help?
Thanks

I give up...
It seems odin3 do nothing when I flash the device. I tried all three pit's with the JHA firmware.
In addition I can't dump the memory.
I think there is no hope anymore. Bring it back to MediaMarkt tomorrow. Maybe noone notices.

Nype said:
It seems odin3 do nothing when I flash the device. I tried all three pit's with the JHA firmware.
In addition I can't dump the memory.
I think there is no hope anymore. Bring it back to MediaMarkt tomorrow. Maybe noone notices.
Click to expand...
Click to collapse
hey did u try flashing the firmwares from the website with P1000XXJID firmware and P1_EUR.pit ?
i just now recovered from almost bricking by flashing some latest files and error in the middle...........

Jo, I tried it several times. The flashing is successful but the tab doesn't start at all. Thanks anyway.
Übrigens, wie klein die Welt doch ist. Ich komme auch aus Düsseldorf.

Nype said:
Jo, I tried it several times. The flashing is successful but the tab doesn't start at all. Thanks anyway.
Übrigens, wie klein die Welt doch ist. Ich komme auch aus Düsseldorf.
Click to expand...
Click to collapse
very sad to hear that.......i am very lucky that mine booted up without any problems.....
from arcaden's mediamarket u got the tab?
i am just now learning German....sorry...

Maybe there is hope.
I saw that the galaxy s firmware I used contains boot.bin and sbl.bin and no galaxy tab firmware I tried does.
I think the boot.bin is the problem. Maybe it can't start the initial sequence and therefore the tab doesn't start.
Does anyone have those files from galaxy tab?

dito bricked...
hello guys,
any update on this bricking thread? received my tab today and work for 120min with the shipped firmware - then i decided to install the latest one from samfirmware....
after a big RED FAILD while flashing (mybe me fault, i used the repartition)...sinvce this no boot and or restore is possibe. tried the JID firmware with div. pit files (eur.pit, 909.pit, 816pit). with the 816 one the flashing works fine. the device is later not motivated to book- [email protected] the samsung logo...
anyone a idea hoe to bring back this expensive device.... any help highly appriciated....

Did you try the JHA firmware? It contains dbdata.rfs. Maybe this helps.
Is there no possibility to get the bootloader from a working tab? If there is a recovery mode to restore the system the firmware has to be still on the tab.
Maybe could someone search for it?

Nype said:
Did you try the JHA firmware? It contains dbdata.rfs. Maybe this helps.
Is there no possibility to get the bootloader from a working tab? If there is a recovery mode to restore the system the firmware has to be still on the tab.
Maybe could someone search for it?
Click to expand...
Click to collapse
hi nype,
thnx for reply... will try the JHA tomorrow... let you know about the result...

chmon said:
hello guys,
any update on this bricking thread? received my tab today and work for 120min with the shipped firmware - then i decided to install the latest one from samfirmware....
after a big RED FAILD while flashing (mybe me fault, i used the repartition)...sinvce this no boot and or restore is possibe. tried the JID firmware with div. pit files (eur.pit, 909.pit, 816pit). with the 816 one the flashing works fine. the device is later not motivated to book- [email protected] the samsung logo...
anyone a idea hoe to bring back this expensive device.... any help highly appriciated....
Click to expand...
Click to collapse
JHA should fix your problem. select repartition when flashing it.
then upgrade to the latest firmware without repartition and it should boot fine.

wow, you guys amaze me....this thing isn't even shipping yet in most of Europe and you have the things for 5 mins and you already bricking them hehe. Hope you manage to sort them all out.
On another note, I know the lagfix works for the Galaxy S phones, has anyone confirmed that this needs to be done on the Tab? Cos by the sounds of it there are a lot of issues when it's done and could be the cause?

hi guys,
successfully restored my bricked TAB - i'm back in business now....
flashing back to JHA with replartitioning and then flashing JID w/o replart. did the job... thanks to clubtech and Nype
acutally i'm on the JID (offical FW) - unfortunately the mail client does not jet support exchange 2010 SP1 (same problem I had on the galaxy s before upgradeing to JP6....
now I wanna try the JJ3 and JJ4 Tab firmwares from samfirmware.com !
anytime when I flash one of this images I get the RED ERROR...
anyboady installed one of this versions successfully? which .pit file I should use?

help
chmon said:
hi guys,
successfully restored my bricked TAB - i'm back in business now....
flashing back to JHA with replartitioning and then flashing JID w/o replart. did the job... thanks to clubtech and Nype
acutally i'm on the JID (offical FW) - unfortunately the mail client does not jet support exchange 2010 SP1 (same problem I had on the galaxy s before upgradeing to JP6....
now I wanna try the JJ3 and JJ4 Tab firmwares from samfirmware.com !
anytime when I flash one of this images I get the RED ERROR...
anyboady installed one of this versions successfully? which .pit file I should use?
Click to expand...
Click to collapse
I envy you! I had the idea the JHA could resolve my issue.
Problem is now my tab is black... and the computer doesn't see it when I connect to the USB port.
I was making a backup while my wife has closed the power line. Now the tab display turns on only when it's powered by the charger displaying 2 icons of a phone and a computer (saying something like: ehi you turned off the computer while I was connected in download mode, I'm dead!).
Last hope I have, because I wasnt writing in the nand but only reading, is waiting to the battery to completely discharge to see if I can then reenter download mode. But how long should I wait before the battery goes down... (with display off, phone off, no wifi...)
Anyone has different ideas?
Thanks.

patomas said:
I envy you! I had the idea the JHA could resolve my issue.
Problem is now my tab is black... and the computer doesn't see it when I connect to the USB port.
I was making a backup while my wife has closed the power line. Now the tab display turns on only when it's powered by the charger displaying 2 icons of a phone and a computer (saying something like: ehi you turned off the computer while I was connected in download mode, I'm dead!).
Last hope I have, because I wasnt writing in the nand but only reading, is waiting to the battery to completely discharge to see if I can then reenter download mode. But how long should I wait before the battery goes down... (with display off, phone off, no wifi...)
Anyone has different ideas?
Thanks.
Click to expand...
Click to collapse
Hi,
That display icons you are thinking of a deda tab is completely fine as i have also got them but those are the same as the download mode.
you can flash the tab even in that mode and no need to wait until battery discharge...
just hold the volume down + power + home for around 2-3 minutes and let the tablet to switch off and the again hold the three again to enter the download mode with the same icons and flash in the normal way...

I'll try
chowdarygm said:
Hi,
That display icons you are thinking of a deda tab is completely fine as i have also got them but those are the same as the download mode.
you can flash the tab even in that mode and no need to wait until battery discharge...
just hold the volume down + power + home for around 2-3 minutes and let the tablet to switch off and the again hold the three again to enter the download mode with the same icons and flash in the normal way...
Click to expand...
Click to collapse
Let's hope you are right! I had before too the icons, the difference was that the computer finded the tab.
I surely didnt wait 3 minutes holding the buttons pressed. And to turn it off I keeped pressed (maybe 30 seconds) only the power button. And I'll try as soon I will be home.
Another thing: is it necessary to press also the home key? Before the "brick" I entered download mode only with power + volume down
Thank you for your help

patomas said:
Let's hope you are right! I had before too the icons, the difference was that the computer finded the tab.
I surely didnt wait 3 minutes holding the buttons pressed. And to turn it off I keeped pressed (maybe 30 seconds) only the power button. And I'll try as soon I will be home.
Another thing: is it necessary to press also the home key? Before the "brick" I entered download mode only with power + volume down
Thank you for your help
Click to expand...
Click to collapse
no idea mate. i remember reading somewhere to use 3 button combination and these were the steps i followed....
Sent from my HTC HD2 using XDA App

[Q] I lost my SGS firmware by wrong wy of flashin .....please HELP

I tried to update my SGS to android 2.2 through kies wihtout puting my phone in to recovery mode. The firmware seems to be lost and the device cannot boot only give me a black screen with word samsung galaxy s GT I9000 wrote on it.
Iam very new in android devices please help me. I do not know what I should to do..

Mine did the same thing when I flashed with Kies.
Try this: Hold Volume UP, Home button and on/off button together until a screen with a few options appears. Select Wipe/factory reset from the list using the volume up/down button. Select ok and reboot. You will loose all your data but your phone will work again.

aviatorshar3an said:
I tried to update my SGS to android 2.2 through kies wihtout puting my phone in to recovery mode. The firmware seems to be lost and the device cannot boot only give me a black screen with word samsung galaxy s GT I9000 wrote on it.
Iam very new in android devices please help me. I do not know what I should to do..
Click to expand...
Click to collapse
BTW You did the upgrade the right way. With Kies you don't need to go into recovery or download mode before flashing. Follow the previous posters instructions and if that doesn't work you'll need to search around here more, for other flashing methods or just to find out if your internal sdcard is dead.

Galaxy Tab not booting, stuck at "GalaxyTab Samsung" boot screen

Hello,
I have flashed my Galaxy Tab with roto JMI, but it's stuck at the "GalaxyTab / Samsung" boot screen.
I can get into download mode with volume down and power, I can reflash it but in the end it does not boot.
What can i do?
loony

*bump* anybody?

Help please!!! I have the same problem!

I am still having this problem. I am wondering if there is any way how to debug whats happening at the Samsung logo screen. With adb the devices is not detected (it seems not to be detected at the usb controller).

What did you use to flash?
What files did you use?
Give all the info so people can help
Sent from my GT-P1000 using Tapatalk

Hi, I have exactly the same problem.
After upgrade du JMI roto with odin 1.7 (all upload seems to be ok, repartition with p1 and pda file Roto-JMI-Full-v2 no error message) but the device hangs on samsung galaxy tab logo and don't boot.
In my case previous version was pda jj3/phone jid / scs jj2

rsmurdoch said:
What did you use to flash?
What files did you use?
Give all the info so people can help
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Device it GT-P1000 (German/European version)
Bought the device
Got a lot of restarts
Flashed with P1000OXAJM6
Device worked again for some days
Device not booting anymore
Tried reset with different methods (Touch screen, press power; Touch menu button and power button): Sometimes worked, sometimes not
Recently not booting anymore, no trick worked
Flashed Roto Roto-JMI-Full-v2.tar with P1_add_hidden.pit
Device still not starting
Flashed original firmware: GT-P1000_P1000XXJK5_P1000OXAJK5_P1000XXJK5_P1000XXJK5_XX_DBT.zip
Device not starting
Flashed ROTO with Heimdall again (before used Odin only): Device not booting
Thanks!

Same Problem
Im on the SPH-P100, I have the same issue I can access it in Adb the log shows it in stalling all of my old .apks but it never boots past the logo.I have re flashed also but no luck plz help if u can i can post the logcat here but it goes for hrs -_- I assume it loops the process.

loonyt said:
Device it GT-P1000 (German/European version)
Flashed with P1000OXAJM6
Click to expand...
Click to collapse
So, this one contains a bootloader (Sbl.bin). maybe thats the cause of the problem. Still, I wonder why it started in the first place and then after some reboots it gets stuck. I tried different Kernels with no luck. Maybe I should try to flash a new bootloader? However, that could brick the device forever.
Loonyt

loonyt said:
Device it GT-P1000 (German/European version)
Bought the device
Got a lot of restarts
Flashed with P1000OXAJM6
Device worked again for some days
Device not booting anymore
Tried reset with different methods (Touch screen, press power; Touch menu button and power button): Sometimes worked, sometimes not
Recently not booting anymore, no trick worked
Flashed Roto Roto-JMI-Full-v2.tar with P1_add_hidden.pit
Device still not starting
Flashed original firmware: GT-P1000_P1000XXJK5_P1000OXAJK5_P1000XXJK5_P1000XXJK5_XX_DBT.zip
Device not starting
Flashed ROTO with Heimdall again (before used Odin only): Device not booting
Thanks!
Click to expand...
Click to collapse
*bump* Can anybody help?

I have a very similar problem.
I flashed the [ROM] Roto JMI Pre-Rooted Firmware v2 [Feb 4, 2011], and got stuck on the Samsung Boot screen.
Now, I can't even get the Downloading mode to work. It opens fine, but Odin/Heimdall doessn't detect the Tab at all.
Hopefully, someone knows what's going on. If not, I'm taking it back to my carrier, and asking them to fix it (assuming they'll fix it).

Maybe this will help for the bootloader.
Its a bootloader patch. Please read thru the thread. Hope it helps.
http://forum.xda-developers.com/showthread.php?t=888071
Sent from my GT-P1000 using Tapatalk

dlui1 said:
Now, I can't even get the Downloading mode to work. It opens fine, but Odin/Heimdall doessn't detect the Tab at all.
Click to expand...
Click to collapse
Dont get what you mean by that. You cant get it to download mode but your tab start up fine?
Download mode = press vol down + power pn button.
As for odin/heimdall doesnt detect the tab it could be usb port (some reports in android development thread) or could be usb drivers.
As i need to switch usb drivers when i need to flash my tab & my dell streak.
Hope it helps to start you off.
Sent from my GT-P1000 using Tapatalk

Qsilver2001 said:
Dont get what you mean by that. You cant get it to download mode but your tab start up fine?
Download mode = press vol down + power pn button.
As for odin/heimdall doesnt detect the tab it could be usb port (some reports in android development thread) or could be usb drivers.
As i need to switch usb drivers when i need to flash my tab & my dell streak.
Hope it helps to start you off.
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
I meant that I can get into Download mode, with the Downloading logo, but doesn't get detected by Odin. And it stays stuck on the Samsung boot logo if turned on normally. Can't get into recovery either.
Before I flashed the Roto ROM, Odin was working perfectly fine. I've been flashing other kernels and ROMs before. But now, the USB doesn't even seem to get detected. It's like nothing is plugged in. Can't even choose to install/uninstall old/new drivers.
I dont think it's the USB port, as I've tried to connect to Odin on 3 different computers, trying every available port on each. It's looking like the USB connector is just dead or something.

My tabs mainboard was broken, it was replaced and now it works again.
Sent from my GT-P1000 using XDA App

Same problem here man. I CAN get in to download mode. Odin recognize it normally. I CAN download normally. Look likes everything is normal, but after update it restarts, but hangs on Galaxy Tab Samsung logo. I've tryed everything with different firmware, custom-roms, hacking things, but with no success.
Can someone please help me?

Same problem here. My tab is stuck at samsung galaxy logo and until now, no one could provide an answer.
I flashed some ROM from samfirmware that must of locked the bootloader (JMF). Then I tried to flash JM6, JMA, JMC, JMK, JJ4, JJ7, JM5, JJ1, JID and almost all ROTO's. with and without pit files using ODIN 1.7. I also tried a stock ROGERS ROM (that i downloaded from this forum) using Heimdall. The tab always boots to samsung galaxy tab logo. I've done alot of reading in this forum and followed many flashing instructions but when applied, it doesn't work for me.
My main concern: is there still hope with the tab ? or it's gone forever.
Is there any specific order that i must follow when flashing ? ( ie, flash one specific ROM before another). The tab was canadian that was flashed to euro.
Thanks for reading my post.

the dbdata file is corrupted.
1) download this file
http://forum.xda-dev...98&d=1290261479
2) extract it
3) use Odin to flash it under the PDA option
-make sure repartition is UNCHECKED
-do not select any pit file
-leave everything else the same

handfree said:
the dbdata file is corrupted.
1) download this file
http://forum.xda-dev...98&d=1290261479
2) extract it
3) use Odin to flash it under the PDA option
-make sure repartition is UNCHECKED
-do not select any pit file
-leave everything else the same
Click to expand...
Click to collapse
Same prob. tab reboots to samsung logo.

Same Here, I tried many combinations with the help of experts on this board. Conclusion: shipped to Sammy for warranty repair.

[Q] Help ! My tab p1000 hangs on samsung logo

For about a week now my samsung galaxy tab p1000 keeps freezing on the samsung logo screen and every minute ore so vibrates very short.
No matter how long i wait it keeps like that . Ive tryed the reset from the recovery mode (powerbutton + volume up) but no luck. The tab is still on a stock fw 2.2 i believe. and no root or anything.
Im very new on the whole rom stuf so some help is needed on how to restore the tab. I havent flashed it or anithing. Also it gives a error like in the screenshot below:

You should flash your tab and install a new firmware that's the only solution

omr911 said:
You should flash your tab and install a new firmware that's the only solution
Click to expand...
Click to collapse
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?

dude... get the latest 2.3.3 firmware...
you may check www.samfirmware.com to see latest firmware for your deivce. If you are in ASIA region, look for JPI edition. Its good, fast and stable.
Use ODIN to flash, with REPARTITION ENABLE... once complete flashing, reboot, and repeat the FLASHING again... DO IT TWICE..., but REPARTITION ONCE only...

Do i have to fully boot between flashing, or after first flash straight to download mode?
Sent from my X10i using XDA App

to play safe, let it boot.. but you can skip the configuration and shutdown and go into download mode..

Oké gona try it when i get home
Sent from my X10i using XDA App

jhnschts said:
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?
Click to expand...
Click to collapse
You should watch the tutorial at YouTube before taking any step
Sent from my GT-P1000 using XDA App

thx for all the help. took me couple of hours but got it running again on andriod 2.3.3

MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i

Im at your same state. My tab hangs on samsung logo and lets me to download alone. I can help you with the drivers part. Im sure you have the Kies in your system. Just push the on button and connect your phone to the pc and run Kies. You have an option to troubleshoot which will update the drivers for your phone. This worked for me. For the rest of the part, there is a chap who is helping me on this forum and he advised me to go for stock ROM. Ill try that today after sufficiently charging up my phone.
I ve been searching for a while now and looks like this is common and nothing much to worry about. Ill keep you posted on what happened on my attempt to odin flash the stock ROM.

Hello friend, my tab is back and working fine now. Hope tried connecting kies to get your driver up for the tab. Once its up you can get to the download and flash stock rom using odin. This would bring your phobe back to life.
I am currently running on overcome experience rom. Its pretty good and they have great instructions on their site. Try that you should be all set.
Best of luck.

I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.

copper7op said:
I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.
Click to expand...
Click to collapse
Can you be more specific on the state of your G-Tab?
What firmware were you using before the problem occurs?
if you are updating from proyo, you will need to flash dbdata.rfs. For your reference you can follow these following steps (given you can access download mode).
http://forum.xda-developers.com/showpost.php?p=24908470&postcount=2

Thanks a lot
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here and its working after selecting factory reset.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance
---------- Post added at 06:24 PM ---------- Previous post was at 06:17 PM ----------
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here( including flashing twice with partion uncheck for second) but tab was hanging at samsung logo and its working after selecting factory reset from recovery option.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance

I doubt you will ever get Kies to work with custom ICS rom in your tab.

priyana said:
I doubt you will ever get Kies to work with custom ICS rom in your tab.
Click to expand...
Click to collapse
Hahaha.. you are still doubting? -- or should you have said you're sure?

who knows Samsung has catch up, then I will be caught out.

kurs2020 said:
MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i
Click to expand...
Click to collapse
Use the latest version of odin. Also go into download mode before connecting to pc. Plase thank me if you found this useful.

Phone not booting after failed firmware upgrade-urgent

Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance

jjake47 said:
Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance
Click to expand...
Click to collapse
Flash a desired firmware from Sammobile. using odin
Make sure that pit file is used

jjake47 said:
Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance
Click to expand...
Click to collapse
you can reconnect it to kies, as it is still on download mode to do recovery like this
http://www.4shared.com/office/koYpRWc1/KIES_update_recovery.html
re you can download a firmware according to your location and flash with Odin

jjake47 said:
Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance
Click to expand...
Click to collapse
are you able to get into download mod or totally not boot up at all

The only solution si to flash a new firmware using odin
Sent from my GT-I9000 using xda app-developers app

Go back to the original India ROM - https://www.fixmystuff.in/FMS_Forum/threads/samsung-galaxy-s-gt-i9000-flashing-to-original-rom.46/

i update my phone using odin with pit file .
now phone not starting any help..

AW: Phone not booting after failed firmware upgrade-urgent
same screen as before?

now phone not booting up at all..

AW: Phone not booting after failed firmware upgrade-urgent
sorry but i'm no expert :/
Does Odin show a connection?
Maybe you can build a so called JIG.

same issue
Hi,
I am in same situation. did it get resolved?
I have GT I90003 which is now not booting and remaining on 'Phone-I-PC' image.
I was using Odin to root but in between cable got disconnected. and now I am nowhere.
Please help how to resolve this problem.
Thanks,
Bhupendra.

see here for firmware n juz change usb port if needed
http://forum.xda-developers.com/showthread.php?p=14933114
or use DDLF1 or DDMF2. Search it using search box in xda.
n dont use i9000 rom for i9003 rom, it will hardbrick ur device, u can search for i9003 post discussiom using searchbox in xda
Sent from my GT-I9000 using xda premium

i have the same problem
i was trying to update my phone and the cable usb move now i have just a black screen with a phone icon + triangle alert+ computer icon. And the problem is that my cellphone doent connect with the computer.
is a samsung s captive. could you help me

Zaddiel said:
i was trying to update my phone and the cable usb move now i have just a black screen with a phone icon + triangle alert+ computer icon. And the problem is that my cellphone doent connect with the computer.
is a samsung s captive. could you help me
Click to expand...
Click to collapse
You have to try again to get it into download mode.
Use Odin for your device model and run it as administrator. If Kies is installed, kill all Kies processes by using Task Manager. Prepare the files under PDA etc. Pull out the battery and hold power button pressed for 1min. Then keep all buttons combo for download mode and insert the battery while pressed (needs some acrobacy skills). If the download mode starts, you can connect your phone and flash firmware again.
tetakpatalked from Nexus 7 flo

thank you
tetakpatak said:
You have to try again to get it into download mode.
Use Odin for your device model and run it as administrator. If Kies is installed, kill all Kies processes by using Task Manager. Prepare the files under PDA etc. Pull out the battery and hold power button pressed for 1min. Then keep all buttons combo for download mode and insert the battery while pressed (needs some acrobacy skills). If the download mode starts, you can connect your phone and flash firmware again.
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
Thanks it really works

Zaddiel said:
Thanks it really works
Click to expand...
Click to collapse
Great, mate
BTW, hitting the thanks button would do more than words
tetakpatalked from Nexus 7 flo