I have a big problem! i wanted to flash with Heimdall... I tested a rom, but not satisfied, i wanted to test another one and my Samsung Galaxy Tab don't want to turn on...
No Samsung logo, No Galaxy Tab logo... Nothing! Like the Samsung Galaxy tab don't want to turn on when i push the ON/OFF Button!!!
What can i do???
Please help!
Please HELP!
EmryX said:
Please HELP!
Click to expand...
Click to collapse
If you're able to provide information as to exactly what you did to get your device in this state that would be immensely helpful in regards to diagnosing the problem. However you'll probably be able to recover your device using a custom jig.
I can not be more explicit. I wanted to try a rom. Wasn't satisfied so i downloaded another one (with cache file, database file, bootloader, etc... ) but the file have been dowloaded too quickly (i think the zip file was corrupted...)
So i did the flash, and my tab don't wake up. I don't have a brick state (with the usb and pc logo). I don't have the samsung/galaxy tab logo. Ihave nothing on my screen. Like my on/off button was broken...
And whatever i do(like the combo on/off with the volume down), my computer don't recognize the tab. So i can't flash it again.
EmryX said:
I can not be more explicit.
Click to expand...
Click to collapse
Well you're going to have to be if you want anyone's help.
What files did you flash? Which software did you use? Which version? Were you given errors? How did you flash the files?
Please provide a detailed step by step run-down of exactly what you did.
I can't remember, and i'm french, i can't find the right word to explain the situation...
I flashed my tab with HEIMDALL (the last version on the website) i think the problem is when i wanted to flash with the file EURO.pit (i choose this file in the "bootloader" category of the software HEIMDALL).
The problem... My computer can't recognyze the tab because i can't turn on the tab, so... I don't know what can i do.
EDIT: And HEIMDALL don't tell me any error. Just "Flash Complete, Rebooting"
EDIT 2: I think i used the wrong bootloader...
Up?
What can i do? Is a batterie problem?
Let your Tab charging for 5 Hours and then try again.
Sounds like you've flashed a bootloader not designed for your tablet. Luckily all Galaxy S devices store a backup copy of the secondary bootloader which is utilised when a certain resistance is detected on the USB port. You can send it off to Samsung and they'll repair it, but they might charge you. The other option is to build your own custom jig which will activate the backup secondary bootloader.
now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today
@Benjamin: I can do a custom jig for a galaxy tab?
EDIT: But i don't think the jig will help me..
"If your phone screen is always black, that is it does not display the white Galaxy S/Samsung/AT&T logo when you switch it on, then sorry, this jig will not help you. "
HELP please? Can i do a custom jig for the galaxy tab? And How?
press and hold the power button for 10 second make sure it totally off
then try to enter download mode
if u are able to enter download mode
flash roto jme v4
if it a battery problem
i think it may be battery flat, try plug it in to the charger see if it work after 10 min
suprajztwenty said:
now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today
Click to expand...
Click to collapse
almost the same thing happened to me. how ever mine will not turn on at all. it gets warm when it charging and then cold when the battery is dead. i have it sitting until it drains.
i am waiting to hear from Samsung. I will keep you posted.
Can anyone out there help. I tried to load overcome's rom and it passed all the steps, and then the screen just went dead
Try to power on together with volume down bro. Lets see if the android image with broom will pop.
Sent from my GT-P1000 using XDA App
Related
Hello, I tried to install a firmware page samfirmware.com my samsung galaxy EUR tab is P1000. installed with odin and all was fine but now the tab does not turn.
Can someone help me?
Thank you and sorry for my bad English.
Can you get into download mode? hold volume down and power.
the screen does not turn but odin detects tab
Thanks.
Connect your usb to the power socket. If battery icon appears then there is hope. It seems like a display problem for me. If it doesnt your display might have issues. Try reflashing with odin and see. Also noob question did you flash with correct firmware for your device. If it still doesnt turn on it might be a hardware issue than a software one.
No battery icon appears. But if I connect to the laptop the odin detects the Tab. I put the wrong firmware.
Thanks.
rui_sandra said:
No battery icon appears. But if I connect to the laptop the odin detects the Tab. I put the wrong firmware.
Thanks.
Click to expand...
Click to collapse
If odin still able to detects it, then there is hope. But this procedure will wipe your tab clean, even internal sdcard!
Now, go to here and get Roto JMI FULL ROM + P1_add_hidden.pit.
Once you've done it, put your tab into download mode by:
1. Turn off your tab without plugging it into anything;
2. Press and hold Power + Vol down till your tab is on;
3. When you see android shoving picture, it's in download mode.
Plug your tab to your pc, launch odin. If it shows up, put P1_add_hidden.pit in PIT field, Roto-JMI-Full-v2 in PDA field. Check "Re-Partition" & "Auto Reboot". And let it flash. Your tab should be able to boot up now, with root installed, and future updates will not need to go through kies.
REMEMBER: DO NOT DOWNLOAD ANY FIRMWARE FROM SAMFIRMWARE.COM AS THEY CONTAINS LOCKED BOOTLOADER! Once you get above procedure done and able to boot up, then report back, still have things to be done
The installation went well but the tab still does not connect. The screen remains dark.
Thanks.
rui_sandra said:
The installation went well but the tab still does not connect. The screen remains dark.
Thanks.
Click to expand...
Click to collapse
Dark as in you still able to see anything on the screen or it wouldn't even turn on? Cause for tab, if battery power reach 10% or lower it will remain dim(as in without backlight, but screen is still on.
The screen does not turn. It was so because a wrong firmware installed. But odin recognizes the tab. Is there any possible solution?
Thanks and sorry my bad english
rui_sandra said:
The screen does not turn. It was so because a wrong firmware installed. But odin recognizes the tab. Is there any possible solution?
Thanks and sorry my bad english
Click to expand...
Click to collapse
Start up sound working as well? I thought after repartition and flashing new firmware should make things back to life. The tab never accidentally dropped before right?
Not to sound. the tab never fell. became so after a firmware update with wrong.
Thank you.
rui_sandra said:
Not to sound. the tab never fell. became so after a firmware update with wrong.
Thank you.
Click to expand...
Click to collapse
Without screen, I can't really help much now. If even charging through wallplug without showing battery icon, I believe your screen is basically defective, perhaps you needs to send back to samsung for a screen replacement since it's still new
i had the same problem before and i panicked. but all i have to do was to
1-flash Roto-JMI-Full-v2 with ODIN (No PIT and No Repartition)
you will get no touch screen after doing this
2-flash the stock ROM with ODIN (with PIT and Repartition checked) again and it will work
Where can I get the stock ROM download from?
Stuck with the same problem. So downloading the Roto-JMI-Full-v2 image. But not sure where to get the stock ROM from.
For me,
I am able to get the battery on the screen when I connect the usb.
I am able to get into the downloading screen by pressing the power + vol down.
Odin detects.
Odin gives me a "Pass" when I flash with Roto-JMI-Full-v2.
But after that I still cannot get in. The Screen is stuck on the Galaxy Tab with samsung logo at the bottom.
Any help would be great since I cannot do anything with the Tab right now.
I'm really sorry, I searched for solutions but didnt found one that fits my problem.
I'm a total newbie and ****ed up my phone in many ways. I started trying to install something it wasnt suposed to work on my phone (rom destinated to 9000 and stuff). I have a Samsung Galaxy S GT-I9000b (sold to latin amarica) and came from factory with android 2.2.
I'm now stuck with the black screen of death, no matter what I do I get this screen. It hapened after I tryied to install unsucessfully the original rom of the phone and odin presented me with an error.
Before I try any further I'd like your advices as how to procede regarding my 9000b. Pulling the battery out, putting it in again and holding either vol down or both volumes and either pluging the phone on usb or pressing power allways gives me the same result, the screen with phone exclamation triangle and pc.
So, before I buy a jig cable on ebay that will probably take 3 weeks to get here (Brasil) is there anything else I can try?
Please help me, I'm desperate and I dont want to take it to assistence, it would cost me much money and ruin all my courage in trying to use Roms.
Thanks alot and sorry for the bad english.
so did you have the 3 button combination before this happened ??
have you tried to charge the phone whilst powered off, then when the phone gets hot, try download mode then ? sometimes this works, as heat can help download mode work.
another thing that has worked for SOME people, is leaving the battery out for 10mins, doing the 3 button combo, and whilst holding the 3 buttons, insert the battery.
you could try these and see what happens,
And 3 weeks delivery for the JIG is a long time, couldnt you make one in less that 3 weeks.
If you can't get into download mode, you are screwed until you get your hands on a jig, simple as that. Just wait. Patience is a virtue.
Thanks in advance for the quick reply guys, I ordered the jig, estimated 20 days, usualy it takes the same amount from the central postal ofice to my home since they allways restrict packages from hong kong. I'm considering making one but I'm a total denial in eletronics.
I was able to get to download mode before this problem yes. I would just hold down vol and center key and then power. Now even when I plug it in to charge I get the screen with the exclamation.
Any more sugestions?
no other suggestions other than whats listed above
looks like you will have to wait for the JIG to arrive.
Loner-phone here you come lol
Then I have a couple of questions.
1) Since I plut it in directly on the power and still recive the same screen is the phone still charging? Or once the battery is over I'm ****ed up twice?
2) Is there any chance that the jig wont work or I in some way ****ed up my I-9000b permanently?
3) After I make/get a jig how should I procede? I heard about one-click odin, but apears that its for another model of phone, and since I got on all this trouble exactly for trying to do things to my phone that were suposed to be only for another model, I'm kind of lost.
Inputs?
Thank you all for already awnsering my questions.
1) the system is corrupted so the charging indicator will be too - thus leading to Phone ! PC image - this is the only image the phone can now produce
2) The 'JIG' has a 100% success rate - providing that the motherboard is not fried - which it isnt as it still shows an image
3) the jig is just a modified USB, just plug it into the phone whilst powered off and download mode will appear, and then you just attach your genuine USB cable and flash stock ROM thru ODIN.
azzledazzle Thank you very much for your patience, but since I`m a total newbie to all this, some of your awnsers I didnt understood fully, do you care explain me better?
Regarding question 1) The power indicator is corrupted, ok. But this means if my battery die out of usage it wont charge again or just that the indicator wont show that is charging but the battery actualy is charging?
and for question 3) Is ther any tutorial directed to I-9000 on how to use odin to flash a stock ROM ? like baby steps? After all that I'm even afraid to turn the phone on, so I would like to know exactly what to do. I`m cosindering asking someone with technical skills to help me on a home made jig.
oh im sorry, i get carried away sometimes.
1) i assume the battery will be charging yes. only the phone will not be able to show this due to the corruption.
2) when you have made / bought a JIG (link below) you ideally want to flash a Stock ROM, you can get this from samfirmware (link below) and also on this site is a tutorial on how to use ODIN, its fairly easy if you just read the instructions provided.
JIG: http://forum.xda-developers.com/showthread.php?t=819551&page=3
Firmwares : www.samfirmware.com
ODIN download and guide : http://forum.xda-developers.com/showthread.php?t=846913
Its a miracle, somehow I managed to get into download mode. But I'm still a bit insecure
Here is the deal, I dowloaded a .tar file that alledgedly from my carrier and for my country. The tar is named JPA_JP3_JPA.
Inside the file there are cache.rfs factoryfs.rfs modem.bin param.lfs zimage
But what should I put where on ODIN if I only have PIT PDA PHONE and CSC?
And how can I discover if I should use pit 512 or 803?
Should I consider a master clear setting?
the file you downloaded is a full firmware compressed into 1 .tar file.
so in odin load the .tar file into PDA section and THATS IT !!
DO NOT USE PIT WITH THIS FILE.
press start and enjoy
PS do a factory reset after the flash
vongikking said:
I'm now stuck with the black screen of death, no matter what I do I get this screen. It hapened after I tryied to install unsucessfully the original rom of the phone and odin presented me with an error.
Click to expand...
Click to collapse
Hello all!
I've got my hands on a GT-I9000 today.
It's got 2.3.3 Android on it.
Wanting to install CM7, I was first of all trying to root it.
I'm on Mac OS X 10.6.8, thus I downloaded heimdall-frontend and the "Hardcore's SpeedMod kernel with ClockworkMod Recovery".
When I put my phone into DL Mode and connect it to my Mac, I can't write the image to it.
Heimdall is failing with "Failed to receive device info response!"
What do you ppl suggest me to do now?
Thanks,
F.
Try to flash with Windows!
Sent from hell to take your soul
Lunchbox115 said:
Try to flash with Windows!
Sent from hell to take your soul
Click to expand...
Click to collapse
Indeed I now managed to get Windows XP PC.
one trouble still remains: after rooting the device remains in an infinite reboot loop!!!
It only stops when WiFi is disabled.
Any help bout this?
Or at least any means to get back to a factory ROM?
I got 2.3.3 before flashing...
Thanks!
Try to flash the nightly again, should solve the bootloop-issue.
Or you can wipe cache/dalvik cache, this helped me too.
Lunchbox115 said:
Try to flash the nightly again, should solve the bootloop-issue.
Click to expand...
Click to collapse
Which nightly do you intend me to re-flash?
Or you can wipe cache/dalvik cache, this helped me too.
Click to expand...
Click to collapse
How do I achieve these two things?
Thanks,
F.
Just take the latest nightly. To wipe the cache/dalvik cache you have to boot into recovery (hold volume UP + home button + power button.
Sent from hell to take your soul
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
You can check if it is in download mode by pluggin it in pc with odin. See the wiki page what it says about soft brick.
Soft-Bricked
After flashing a rom you might not be able to enter the Download Mode by pressing Volume Down + Home + Power. In this case a so called 'JIG' would be helpfull.
You could build it on your own: [HOWTO] [REF] Get Download Mode without 3-button combo using homemade JIG
... or buy a preassembled one on a well known marketplace.Hint: There is no difference between a JIG for Samsung S/S2 or S-Plus.
See if you can go into d0wnload mode with vol down home and power. If that works go and try to find the stock firmware for the phone and download and extract. Download odin and put csc pda and phone/modem in there rightful places. 512 pit in pit section. Pit usually comes with odin download. If not find it somewhere. Repartition checked and hit start. It should reboot when done. It will problaby take a couple of min to boot but be patient. If it starts to go into boot loop put back into download mode again and reflash. Its very hard to mess up the phone to where you cant fix it. So relax and watch tuts or whatever helps you best. I know of a link i that i will find and post for you when i do.
Sent from my GT-I9000 using XDA
http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using XDA
DEAD bricked phone
So, my friend's phone (hopefully she'll stay my friend after this) was turning itself on and off all on it's own. So I (no good deed goes unpunished) suggested that I will upgrade her firmware for her. She had 2.3.3 firmware. I downloaded the odin1.7 as well as a package of all the info for 2.3.5 firmware upgrade. I flashed the phone- originally only using the PDA option with a file called: CODE_I9000XXJVS_CL565837_REV03_user_low_ship
It worked, the phone restarted and showed the firmware as being 2.3.5.
I don't know why, but I thought it would be a good idea to update the CSC and the pit and the modem as well- so I did that. when this was finished - though odin said that the flashing was successful the phone is completely unresponsive. The computer doesn't recognize it, it doesn't show any signs of life at all- like it's in the dark ages and there is no electricity in it.
HELP!!!
First question: do you think a jig will work? how dangerous is it?
second question: is there any other option to try that I haven't come across other than changing the motherboard, and if there isn't do you know where I can get one, bear in mind I live in Israel.
Please e-mail me a copy of the response to [email protected] if you can...
Odin dosnt pick it up atall plus the batteries dead aswell now and the stupid thing wont charge so i cant evan try any thing till i find away or some one to charge it but thanks for the tips.
gavster26 said:
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
Click to expand...
Click to collapse
Try to recharge the battery from other phone or use another battery.
Check whether you have the download mode working. (Home+Power+Volume down)
If yes, put phone in download mode and flash Darky RE or any other Rom via ODIN. Try to get the recovery mod after rooting and then try ROMs.
Or try restarting the phone it may work without update also. Long press power in download mode restarts the phone. However be careful.
What is the status of the device can you go to download mode
Post your firmware files name and how you choose in the odin flasher.
Dont try anything crazy you will bricked your device more:banghead:
Sent from my GT-P1000 using XDA
Alternate way to Download mode
Hi gavster26
I have been there with a buddy's phone... not a nice place.
Found a link showing this other trick ... but you have to trial and error this one on the different combos:
1. Phone off
2. USB cable pluged in
3. Odin running
4. Down (or Up - test both) Volume button + Home button + plug in the USB cable.
This booted my dead "bricked" phone into download mode.
Try it.
my tab is rooted and is running 2.2.I decided to flash cwm via odin,i put it in download mode and flashed cwm but odin showed a 'fail'.i tried flashing it again,there was a power cut and the computer unfortunately stopped in the middle of flashing.the tab since then is showng a phone--!---computer symbol.i tried going back into download mode,but luck.odin was still detecting it,i tried to flash cwm again,but no luck.i let it discharge completely.
now the screen with the phone---!---computer wont come up until i plug it into the charger,as soon as i remove the cable,the screen vanishes.i tried to charge it for nearly 6 hours,but still that screen wont come up after i unplug the charger.when i press and hold the power button while the tab is connected to the charger,the screen with the symbol again comes up and vanishes after a few seconds,ive seen a one click unbrick solution for this,but for that to happen the tab should charge and the screen with the symbol should come up even when the tab is unplugged.please help!!
sourabh12 said:
my tab is rooted and is running 2.2.I decided to flash cwm via odin,i put it in download mode and flashed cwm but odin showed a 'fail'.i tried flashing it again,there was a power cut and the computer unfortunately stopped in the middle of flashing.the tab since then is showng a phone--!---computer symbol.i tried going back into download mode,but luck.odin was still detecting it,i tried to flash cwm again,but no luck.i let it discharge completely.
now the screen with the phone---!---computer wont come up until i plug it into the charger,as soon as i remove the cable,the screen vanishes.i tried to charge it for nearly 6 hours,but still that screen wont come up after i unplug the charger.when i press and hold the power button while the tab is connected to the charger,the screen with the symbol again comes up and vanishes after a few seconds,ive seen a one click unbrick solution for this,but for that to happen the tab should charge and the screen with the symbol should come up even when the tab is unplugged.please help!!
Click to expand...
Click to collapse
i guess your gonna download a firmware on 2.2.1 and flash it..........but i recommend 2.3.3 firmware..try it on mine the ......!....... but still odin detects it......2.2.1 is old try AOKP for are tab....best rom
First, which tab is yours.
Edit: from your pm you indicate P1000.
OK, I sounds luke a broken record now but here goes.
Have you had a look at overcome method.
You need to flash GB-stock-safe-v5.
Sometimes even when screen is blank, it can still be a download mode.
So, be sure that it is charged (using original wall charger).
Then ready Odin and the files in proper places and pre connect the tab to PC.
Then boot to download mode and quickly flash using Odin.
http://www.teamovercome.net
Read the guide,
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
Missing pictures can be seen there.
Follow the picture step by step.
missing files at
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
After it is revived, you may want to continue.
If so.
Jump here for the kernel
Here is the kernel (tar format for Odin, zip isn't the one you want I guess)
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
Sent from my GT-P1000 using xda app-developers app
Read my post at the bottom of this thread:
http://forum.xda-developers.com/showthread.php?t=1826324
I had the same issue but I've now sorted it.
tab working again!!
i thank everyone who replied to my post,i have found an easier way to unbrick it.i connected the tab to the computer and after 20 min it showed the screen with the mobile---!---computer symbol.i downloaded an application called one click unbrick,in the app i clicked unsoft brick and the tab imediately started to my surprise.it is now working properly,only the time and date of the device were reset.agai thank everyone for giving me these valuable info.=):highfive
one click unbrick tool in attachments (you need java installed for this to work)
i now have to flash cw and install that jellybean rom right away.
What about a Tab P1000N? What can be done with that one?
One Click Unbrick (by Adam Outler) is not a P1000 specific software.
It should work for P1000N too.
priyana said:
One Click Unbrick (by Adam Outler) is not a P1000 specific software.
It should work for P1000N too.
Click to expand...
Click to collapse
Thanks, it did work for me.
You saved my world
sourabh12 said:
i thank everyone who replied to my post,i have found an easier way to unbrick it.i connected the tab to the computer and after 20 min it showed the screen with the mobile---!---computer symbol.i downloaded an application called one click unbrick,in the app i clicked unsoft brick and the tab imediately started to my surprise.it is now working properly,only the time and date of the device were reset.agai thank everyone for giving me these valuable info.=):highfive
one click unbrick tool in attachments (you need java installed for this to work)
i now have to flash cw and install that jellybean rom right away.
Click to expand...
Click to collapse
I looked every where for 24 hours and then I ran across your post simply......now I and anyone else that has this problem knows to let the tablet charge on the computer our laptop for 20 mind and then the bricked download screen will appear and your good to go you post was very helpful maybe the only real method out there thanks a million:angel::good:
Hello everyone!!! Noob here! So, I'm having a really bad problem... My SGH-T599N (or Samsung Galaxy Exhibit from MetroPCS) has been bricked. Long story short, after finding out nothing works and stumbling upon Odin3 v3.07, I plugged my phone in (in Download Mode) and loaded a [.tar] folder in the[PDA] criteria, pressed start, and all that was shown was...
View attachment 2946077
Nothing else happened, so I unplugged my phone, pressed power button, but only the Black Screen of Death shows (says "Firmware Upgrade Encountered An Issue. Please Select Recovery Mode In Kies & Try Again"). Now, I downloaded Kies, but the problem with this phone is... THERE IS NO SERIAL NUMBER! I looked on the back in the phone, not there. I looked on the battery, and there it is! But.... It doesn't work (either that or it's not it, though it has "S/N:" and the numbers by it, but it still doesn't work). No now, I'm just in a terrible place. Plus, if I press Down Volume + Home + Power, I can still go into Download Mode, but I still have no idea where to go from here and what to do. Somebody please help me!!!
TerrBear94 said:
Hello everyone!!! Noob here! So, I'm having a really bad problem... My SGH-T599N (or Samsung Galaxy Exhibit from MetroPCS) has been bricked. Long story short, after finding out nothing works and stumbling upon Odin3 v3.07, I plugged my phone in (in Download Mode) and loaded a [.tar] folder in the[PDA] criteria, pressed start, and all that was shown was...
View attachment 2946077
Nothing else happened, so I unplugged my phone, pressed power button, but only the Black Screen of Death shows (says "Firmware Upgrade Encountered An Issue. Please Select Recovery Mode In Kies & Try Again"). Now, I downloaded Kies, but the problem with this phone is... THERE IS NO SERIAL NUMBER! I looked on the back in the phone, not there. I looked on the battery, and there it is! But.... It doesn't work (either that or it's not it, though it has "S/N:" and the numbers by it, but it still doesn't work). No now, I'm just in a terrible place. Plus, if I press Down Volume + Home + Power, I can still go into Download Mode, but I still have no idea where to go from here and what to do. Somebody please help me!!!
Click to expand...
Click to collapse
I will recommend you to search in here: http://forum.xda-developers.com/exhibit-4g
You can try and flash a stock firmware via odin, since you are able to get in download mode. Firmwares for your specific phone may be found here: www.sammobile.com
TerrBear94 said:
Hello everyone!!! Noob here! So, I'm having a really bad problem... My SGH-T599N (or Samsung Galaxy Exhibit from MetroPCS) has been bricked. Long story short, after finding out nothing works and stumbling upon Odin3 v3.07, I plugged my phone in (in Download Mode) and loaded a [.tar] folder in the[PDA] criteria, pressed start, and all that was shown was...
View attachment 2946077
Nothing else happened, so I unplugged my phone, pressed power button, but only the Black Screen of Death shows (says "Firmware Upgrade Encountered An Issue. Please Select Recovery Mode In Kies & Try Again"). Now, I downloaded Kies, but the problem with this phone is... THERE IS NO SERIAL NUMBER! I looked on the back in the phone, not there. I looked on the battery, and there it is! But.... It doesn't work (either that or it's not it, though it has "S/N:" and the numbers by it, but it still doesn't work). No now, I'm just in a terrible place. Plus, if I press Down Volume + Home + Power, I can still go into Download Mode, but I still have no idea where to go from here and what to do. Somebody please help me!!!
Click to expand...
Click to collapse
Don't know if you still need help but assuming you never replied to the other person's post eh I'm assuming you figured it out. If you didn't though I should first say that the galaxy exhibit 4g and the galaxy exhibit are two different phones. Also the official stock firmware for our phone hasn't been released by samsung for some reason so there's no way to go back to complete stock unless you make a backup. Here's a link for a pre-rooted stock rom though that you can flash through odin http://forum.xda-developers.com/showthread.php?t=2489238
Same Problem here but I am not sure how to use ODIN ?
Mr. Clown said:
I will recommend you to search in here: http://forum.xda-developers.com/exhibit-4g
You can try and flash a stock firmware via odin, since you are able to get in download mode. Firmwares for your specific phone may be found here: www.sammobile.com
Click to expand...
Click to collapse
I am having such a hard time getting My SGH-T599N to activate and I need the stock Rom Because I wiped my Android all ready. It can reach Download and even recovery but I think that it Needs the stock Firmware. I wonder if you have found the Solution yet?
[email protected]......... thank you so much
Wolf.eagle1957 said:
I am having such a hard time getting My SGH-T599N to activate and I need the stock Rom Because I wiped my Android all ready. It can reach Download and even recovery but I think that it Needs the stock Firmware. I wonder if you have found the Solution yet?
[email protected]......... thank you so much
Click to expand...
Click to collapse
Have you searched in the links above?