[Q] Red Button & Power Button - Tilt, TyTN II, MDA Vario III General

I'm trying to remap my End Call button so I can use it to "Go Home", and End Calls. I don't want that button to put my phone to sleep, just the side power button. I want to also free up my IE button for use with anything else I might want it bound too.
In my ventures to do so, I've noticed that both the End Call button and Power button are mapped to the same keymap. I had thought I had changed the Power button but when I tried to end a call, the red button just puts the phone to sleep, which is exactly what I wanted my side power button to do while I'm on a call.
Is this a bug, or a "feature" in the kernel?

im pretty sure its part of the kernel, it has been there since the donut days (the old keymap was crazy volume up was the menu button, volume down was back)
it is partly due to the fact that the vogue has very few buttons, the kaiser was a device that just worked with our kernels at first.
i think even changing the buttons in atools will not change the kernel key stacks like your asking for
although l1q1d being the creator of Atools would know a lot better than I would

I've been looking at the querty.kl file, trying to understand the keymaps, and what they're associated too... Anyway of running a program that captures key presses and prints out the associated keymap for that key press?

Hey! Post from the grave!
Did you have any luck ??

I was also hoping someone knew how to go about this.
I know there are ways to remap keys, but I'm stuck in a browser, and all I can do it put my kaiser to sleep.
I even tried atools keyboard remapper to no avail (awesome tool btw).
It's no fun when you can't exit applications d:

I don't mean to double post, was just hoping someone could answer this.
Krazy-Killa did you have any luck?

Related

Button Question

Hi everyone, i have had a chance to mess with the tilt, now im waiting for mine to come in the mail, the one thing that pissed me off about it was, like my X01HT it has a comm manager button, i like that button a lot, but also i use the push and hold to put the phone on vibrate, when i get the phone i plan to put the stock HTC Rom, but i was wondering is there anything i can do about that, i want to enable push and hold vibration
I just installed AE Button Plus on mine, and it is great. YOu can set it up to do all kinds of things on your buttons, wiht single, double, triple, and hold settings for each button on the phone. Inexpensive as well.
Here's a link to info on it.
or you can use the htc end key, and set the long end key press to switch to vibrate. and its free

Standby with Hard Button Other than Power Button?

I have searched, but I have been unable to find a solution to my problem.
During my searches, I have discovered that many people, like myself, often struggle finding and pressing the power button to turn on and off the screen/phone.
I current use S2U2, which is a great piece of software, and even better since it is free. I use S2U2 to wake my phone up. I have set my settings to not lock the phone when device is off so to unlock/wake my phone I simply press any of the hardware buttons, and I see the S2U2 screen.
However, turning the screen off/putting it in standby is more of a hassle since I have to try and track down the tiny power button. I have downloaded and tried several free remapping programs but none of them allow me to remap a hardware button to standby/lock the phone. Generally, they only allow me to remap a hardware button to a program or setting other than standby/lock.
I would like to know if there was a way to remap a button to put the phone in standby.
I use BlackMe , more info on the website...
You could also try putting some "puffy" paint on the power button. It's that 3D paint people put on shirts etc. that bulges up when it dries. It makes a nice little bead to hit rather than trying to press the little power button.
The Reaper said:
I use BlackMe , more info on the website...
Click to expand...
Click to collapse
Does this program put the Tilt into SLEEP/STANDBY or just blank the screen. The author does not make this clear.
it just blanks the screen. I will keep up with this thread though, I have always wanted my PTT button to be my power button.....
yeah, me too. I am surprised that there isn't a solution yet....
I've always hated the hard to find power button as well. The PTT button is so easy to find and press, yet I've never, ever, not once accidentally pressed it. Why can't the power button be as raised up as the PTT one? I've seriously considered taking my phone apart and machining a replacement power button that stuck out farther. I'd probably make it out of aluminum to make it look cool, too.
But I'd be plenty happy in the mean time with remapping my PTT button to be a power button...
Yeah, I don't even need all the power button powers... I know the power button is used to do other things other than turn the screen on and off... I just want to use another button to turn the screen on and off and suspend the phone...
SPB Mobile Shell allows you to toggle the screen, suspend and many other options. I don't know if I would purchase the program just for it's button enhancing ability though.
Correction SPB Pocket Plus not SPB Mobile Shell
You could also check out AE Software at http://ae.inc.ru/
I dont know if this is kind of what you guys want, but heres my 2 cents. Go here to this thread http://forum.xda-developers.com/showthread.php?t=431328&page=4 and download Dave Shaw's awesome remake of psShutXP in post #34 (its the newest version)
Install to your MAIN DEVICE cuz thats where these shortcuts point to, then pick one of the 2 shortcuts I provided and just drop them in your main \Windows folder.
Hold down PTT button
Long_PTT
Quick push of PTT button
Short_PTT
Now, you can either just quickly push the PTT button or hold it down (depending on which shortcut you chose) and xdaShutdown will pop up giving you the option to RESTART,SLEEP/SCREEN OFF, or COMPLETELY SHUTDOWN your phone.
So essentially now, the PTT is your new power button. To put in standby mode just 2 button pushes is required. 1 push on the PTT button, then another tap on the Sleep button.
But if your really lazy and just want to be able to push PTT button once to put it in Standby/Sleep mode, then all you would do is find out the command to put the phone in standby mode (sorry I dont know it), then open notepad on your desktop, then type the command something like, this is ONLY AN EXAMPLE (42#"\Program Files\xdaShutdown\xdaShutdown.exe"), then save the file as either Short_PTT.lnk or Long_PTT.lnk and then drop the file into your \Windows folder.
But what about one push on the PTT button to wake it up out of standby? (without setting it so that all buttons wake it...)
Wow, I am an idiot. Haha. I never thought about the "wake up" part. Cuz once in Standby, the PTT button would then be non responsive so it then wouldnt work for waking the device. That is a tuff one, I have no idea how to specify what button(s) are locked/unlocked when in standby.
No way, you're not an idiot! I (and others I'm sure) totally appreciate your input. I just happened to have thought this over many, many times. I very well may have to go buy a bottle of that "puffy" paint stuff... sure would beat a full disassembly of the device to make a new, pronounced button!
I'm hoping I haven't misread the problem here, but if it is what I think it is, then you can do it with just S2U2.
I have my TyTnII set up as follows:
No button lock
S2U2 set to lock when backlight turns off
Backlight to turn off in 1 minute
In Setting/Buttons, assign "Button 4 (hold)" to S2U2
So I use it in a similar manner to the original poster. I "wake" it with a press of any hardware button (and obviously unlock it with a slide on the screen)
I lock/stand-by it by pressing and holding the OK button (it goes into standby after 1 min of being locked)
Hope that makes sense and is what you are after.
(nb am not 100% sure that the ability to set an app to run on the holding of a button is standard - I might only have that functionality dues to having SPB PocketPlus installed - am sure someone will let me know!)
Yes! this is what I was going for... I didn't even think about using your solution. Thanks!!!!
Does anyone have a problem with the hardware buttons not waking the phone up? I have my key lock setting not to lock buttons, but most of the time, my phone does not wake up when I press any of the hard keys. However, when I use the jog dial, the phone will wake up, but none of the other buttons will work.

power button alternative

My kaisers power button has split in half on me, Im wondering if i can change the PTT button to be the power button thru maybe a registry change or possibly another alternative. As u kno the power button blacks the screen and locks it so u cant push buttons, and i really dont want to dial in my pocket. Can someone please help me???? I dont want to throw away a prefectly good phone bcuz of a poorly made button. Thank you guys
well i took my phone apart and swapped the camera buton for the power button, but who knows how long this one will last. Does anyone know of any reg hacks, or software that will lock the phone on a button press maybe PTT button?
Very good that you have the technical ability to do what you did
In order to not use the power button so much I advise you to install a lock utility like S2U2 for example (I suggest it because I use it and it has a very nice interface). There are also smaller and lighter apps around. Just have a look.
In addition to that you have to change the key lock settings of the phone to "lock keys if phone is locked". This will enable you to wake the phone up with any key on the phone. In order to not activate any functions of the phone with this setting you have to set the timeout of S2U2 on wakeup to 0. This way S2U2 kicks in before any of the key functions come in.
By doing these things I am able to have a phone that does not dial in my pocket and I do not use the power button to wake it up. I use the wheel.
I hope this helps.

[Q] power button broken

so my power button is gone on my htc touch with android. i need to poke the small button inside with a penpoint or small object.
is there a way to re-map the button or another way to turn the phone on from sleep?
My power button is working but I have same concern. Developers, why don't use D-pad key for home/back etc functions? power/camera buttons are very critical because without them you may even have difficulty to enter bootload mode.
Atools will let you remap the keys
Thanks!. I have created an update that set Vogue D-pad as:
Left: Back
Center: Home
Right: Menu
Working perfect on my SuperFroyo.
goducks3620 said:
Atools will let you remap the keys
Click to expand...
Click to collapse
min1968 said:
Thanks!. I have created an update that set Vogue D-pad as:
Left: Back
Center: Home
Right: Menu
Working perfect on my SuperFroyo.
Click to expand...
Click to collapse
hmmm... can i apply this .tar by updating in the boot menu?
will i be able to wake up my phone then? without having to push the power button?
goducks3620 said:
Atools will let you remap the keys
Click to expand...
Click to collapse
I've used Atools to remap wake up to other keys but, it only works if i press those keys after receiving a notification.
have you been successful in waking up the phone from sleep without having to press the power button? are there additional settings i need to change?
I also have the same problem - my power button stopped working this afternoon for some reason and I cant wake up my phone except by calling it from another line or restarting it - any idea how i can change the wake up key? from what i gather, the atools fix isn't working?
Exact. Same. Problem. Using Incubus RLS16 (no audio input either... grrr...)
I remapped the power button and it will turn on but only under these conditions:
Phone just went into sleep, after a few minutes no response.
If it's plugged in.
Which makes me wonder... are there two different sleep modes? ie: light sleep which lasts for a few minutes when unplugged, and a deep sleep which kicks in after that, or never, when plugged in.
I only need to wait a few more weeks for my upgrade, but I want to be productive now!
Anyone have a solution to the phone not waking up problem - Ive realized its not my power button..

[Q] HD7 Power Button

Been using HTC phones and we all know the power button is an important hardware.
I was thinking can we RE-ROUTE the power button to other buttons, since hitting just the power button makes me feel pain and seeing it flattened day by day...
for my previous touch pro i use registry to re-route succesfully. i wonder some geniuses here can do the same job.... please anybody
I would also be interested in this if at all possible.
Singularity0821 made a "restart phone app" : http://forum.xda-developers.com/showthread.php?t=1333740
...with right argue you could convince him to add a shut down option...
out of curiosity...why you guys restarting your phone in the first place? Last time i restarted my phone was almost 1.25 months ago. Then recently when the HTC update was pushed out. besides that..i havent really had the need to hit the power button. How often do you guys power cycle your phone and why? issues? habit? Just curious..
lol , yes we are the crazy maniac phone restarter
It's useful when you want to apply reg hacks...
Also power button is crucial to reach all usb profils...
and clearly my hd7 power button is getting weaker too http://forum.xda-developers.com/showthread.php?t=1359132
A restart app is one thing, which makes it a bit easier to not having to use the power button for that.
But I too am "suffering" from that power button issue and honestly.. you use the power button to not only restart the phone but also to wake it up and unlock it.
Now if the power button could be relocated (even if there has to be software for it) this would be really nice before my power button entirely dies!
Foxnov1990 said:
A restart app is one thing, which makes it a bit easier to not having to use the power button for that.
But I too am "suffering" from that power button issue and honestly.. you use the power button to not only restart the phone but also to wake it up and unlock it.
Now if the power button could be relocated (even if there has to be software for it) this would be really nice before my power button entirely dies!
Click to expand...
Click to collapse
totally right there. We had enough pain of this!!
Reroute to the volumes button n camera button,or maybe an app that can shake in a specific way to wake the phone.
Registry setting that can re-route the wake phone button?

Categories

Resources