http://forum.xda-developers.com/showpost.php?p=11703539&postcount=21
i dont know what that is or what it does, please enlighten me? <3?
heldunder said:
i dont know what that is or what it does, please enlighten me? <3?
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=CNO7lL7g6pc
This didn't work for me (Eclair) and hosed my Home screen. Repeated reboots led to the activate prompt, which fails regardless of net connection status. Had to use B&N native access to Apps, and 'Home Switcher' to recover my Zeam homescreen. :|
Is this appropriate for the NC? Does it have a bunch of "phone" stuff that can't be hidden? I have dnlded it & will wait to see some examples of it's functionality.
Watching for all you creative people that are smarter than me to give it a review.
Cheers,
kev
that sure is sexy looking
bugeyed1 said:
Is this appropriate for the NC? Does it have a bunch of "phone" stuff that can't be hidden? I have dnlded it & will wait to see some examples of it's functionality.
Watching for all you creative people that are smarter than me to give it a review.
Cheers,
kev
Click to expand...
Click to collapse
It looks great. Still don't know how to setup everything yet but this looks so much better than Honeycomb.
OK, should have taken notes. What were the installation steps? They, along with the link, have disappeared.
Cheers,
kev
Mine keeps saying "device not supported" after I click to activate, and then it FCs... any ideas? Is there a step I'm missing, or something?
I uninstalled it for now...
(Autonootered 1.01)
Anyone have this working & have any comments? Need the installation steps, as they have been removed from the link. I know this is unreleased Beta, but I would like to try it. PM me the info, if it's not appropriate to continue posting in this thread.
Thanks,
kev
I would really like to get this working as well. I got it installed, but it says "device not supported" If there is a way to get it working, I would be very appreciative of a little help.
Hm... thats actually pretty nice.
I went to Market & then App Brain & tried to dnld Stupid Zombies. Had to reboot it after it froze. Now when I try to launch spb, I get the activate screen, press yes & then get an activation screen that says, Activating SPB Mobil'e Shell..." with a cancel button. It will not proceed beyond this point. If I press Cancel, OH WAIT!! It finally went to the next screen then the normal "device not supported" screen. Took a looooong time, as compared to previous startups. It's back up now. I started to abandon this post, but will post it in case someone else has the same problem. Haven't customized it yet. Lots to learn. This app may be worth the asking price. We'll see.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cheers,
kev
Not asking for a link, just install instructions. Little help?
Nevermind.
Found a cached copy of the post in thread 1
"device not supported"
I get "device not supported" on my NC running phiremod nook V4.. Any ideas on how to get it to work?
Thanks!
I get the same "Device not Supported" message each time I register it. Then it just works. Don't know the implications, but it seems to be fully functional.
Cheers,
kev
P.S. Can't figure out how to rename panels or set SPB to switch to landscape. Anyone?
Trial period!
Hopefully this beta release has this turned off???
Quote from 3.5 user manual:
"Registration
You will be able to use SPB Mobile Shell until the end of the trial version period of 15 days. If you have not
registered SPB Mobile Shell within this timeframe, you will need to do so to continue using it.
To obtain the serial number you need to purchase a SPB Mobile Shell software license and you will receive your
serial number by e-mail."
My concern is that I will like this app. & will not be able to buy a copy that I can register on the NC.
Kev
bugeyed1 said:
I get the same "Device not Supported" message each time I register it. Then it just works. Don't know the implications, but it seems to be fully functional.
Cheers,
kev
P.S. Can't figure out how to rename panels or set SPB to switch to landscape. Anyone?
Click to expand...
Click to collapse
I got the same error. If I wait about 1 minute (maybe less) and then dismiss the error, the SPB works.
While visually impressive in an "ooooooh! Shiny things!" sort of way, there's a few issues:
* The 3.5 beta that I was able to install is clearly designed for a smaller screen. The icons and the spacing on the spacious 7" NC screen is HUGE. I can't find a way to change the resolution to take better advantage of the large screen.
* The SPB launcher does not toggle between portrait and landscape. Bummer.
* The animations in the carousel mode don't really serve any purpose beyond being dancing bologna.
* While SPB touts a great deal of customizability, however that appears to just be at the surface level. I can't find a way to change fonts, tab labels, or set individual panel wallpapers.
I don't know that this will be quite worth $30.
Darn it. I get a "device not supported" error. How did anyone manage to make it work.??
samoukos said:
Darn it. I get a "device not supported" error. How did anyone manage to make it work.??
Click to expand...
Click to collapse
All I needed to do was remove the Zeam launcher from being the default action of the "n" key. Reboot. After unlocking, the NC will prompt you for which launcher to use. Select the SPB. It will go thru the activation process. When you get the unsupported device message, just dismiss it.
Related
here is perfect app which will remove both soft keys from the today screen - it will makes your today longer + soft buttons are still working (this app is not working for inside menu).
just install, soft reset and enjoy. uninstall for reverting back to original.
credit goes to "unknown" - if you know author of this app, just PM me and will update this thread.
[Ummm: This cab launches my VJToggleToday II Alpha. You're probably better off searching for that on this forum, as there is substantial discussion about the app, and how to custom configure the sizes of the bars.
FYI, you do that by making a shortcut to VJToggleToday, with the command line -config
V]
Wisbar advance doing this job too.
It's just a matter of registry
What registry changes are required to do this?
no registry, just install app and bar is hidden
This is vijay555's vjtodaytoggle.
There's an existing topic in the Elf corner about this great tool
http://forum.xda-developers.com/showthread.php?t=320349
Its really nice, thx
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
transparent title and tasks bar?
I was wondering is a way to use this and have the transparent title and tasks bar like in htc album. I think that will be tight.
Great hack, thanks a lot.
On my htc tytn II, the tray bar disappears when I install TodayShrink. Any solution to this problem appreciated.
I was very happy to see this hack...but when I tried it and reset....
Yes, my softkey bar was gone, but my today app (Pocketbreeze) did not take up the space (it is set to auto size).
Any ideas as to why that would be?
UPDATE: Got it working. If I added another plug-in (which did use the new space) and then removed it, PocketBreeze expanded to take up the new space. Kinda odd...but I am glad it is now working.
Arura said:
On my htc tytn II, the tray bar disappears when I install TodayShrink. Any solution to this problem appreciated.
Click to expand...
Click to collapse
Try renaming the vijaytodayshrink.lnk file in \Windows\StartUp to 1vijaytodayshrink.lnk and do a soft reset. It works for me as it will load the TodayShrink program before the tray itself.
jpope said:
Try renaming the vijaytodayshrink.lnk file in \Windows\StartUp to 1vijaytodayshrink.lnk and do a soft reset. It works for me as it will load the TodayShrink program before the tray itself.
Click to expand...
Click to collapse
There is no trayapp.ink in startop on my device htc tytn II with windows mobile 6. Thank you.
patr!k said:
credit goes to "unknown" - if you know author of this app, just PM me and will update this thread.
Click to expand...
Click to collapse
You might ask if vijay555 is the creator.
I'm guessing because of the vijaytodayshrink.lnk that gets added to the startup folder at install.
Is it VJToggleToday II Alpha?
There's a thread on this forum about it.
It was, and always will be, an Alpha release, as I have since internally updated to Version IV.
However, version IV has not been released yet. If version 2 does the job for you, great. However, it was never designed properly for VGA screens and onthe fly correction (eg when rotating), has an issue with the phone on Palm devices, and doesn't deal with the tray properly.
Hopefully all of those issues are fixed in Version IV (except for the Palm thing, which I can't test!)
V
PS note that there is a -config command line to allow you to change settings.
an "Auto-Hide" feature would be great on this!!..
(just like the windows one! when you auto-hide the bottom bar)
I don't get it, is this a rip off of vj's app or what? If it is, then this is the second time on these forums just today that I've seen an author rip someone else's work and call it their own. If that's the case... bad karma man. If it isn't, please feel free to explain.
Yeah, just tested it. This is my VJToggleToday II Alpha.
Hmm, that's a little bit odd how it's become PCM Shrink.
Maybe the same "author" can do a little "PCM Pay Vijay555's Mortgage" as well, if he wants to take credit for some more of my stuff.
This cab launches my VJToggleToday II Alpha. You're probably better off searching for that on this forum, as there is substantial discussion about the app, and how to custom configure the sizes of the bars.
FYI, you do that by making a shortcut to VJToggleToday, with the command line -config
V
vijay555 said:
Yeah, just tested it. This is my VJToggleToday II Alpha.
Hmm, that's a little bit odd how it's become PCM Shrink.
Maybe the same "author" can do a little "PCM Pay Vijay555's Mortgage" as well, if he wants to take credit for some more of my stuff.
This cab launches my VJToggleToday II Alpha. You're probably better off searching for that on this forum, as there is substantial discussion about the app, and how to custom configure the sizes of the bars.
FYI, you do that by making a shortcut to VJToggleToday, with the command line -config
V
Click to expand...
Click to collapse
Like I said, that's just wrong for people to try this crap. VJ's work has been around for a long time and works great, i know many people who use it. To the original poster, get some balls and fess up to stealing someone else's work.
patr!k said:
credit goes to "unknown" - if you know author of this app, just PM me and will update this thread.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=960283&postcount=263
hey guys, i've been looking for a stopwatch/timer program for my tilt for a while, and finally found a great free program.
credit goes to frankyB over at howardforums
omar
Thanks, ive also been looking for something like this so i can use it to count down my time left on my Tacho.
Problem is, when its done, the alarm is too quiet. Would you be able to ask on the forum if he could make a configurable alarm sound so i could choose my own sound for example.
Also if you could make the count down time in full screen would be great.
Obviously all this is if you get the chance. Dont worry if you dont
Thanks for posting though, still useful.
omaralt said:
hey guys, i've been looking for a stopwatch/timer program for my tilt for a while, and finally found a great free program.
credit goes to frankyB over at howardforums
omar
Click to expand...
Click to collapse
This is the avantVision stopwatch, which can be found here:
http://www.avantvision.com/EN/solutions.html
jaso2005 said:
Thanks, ive also been looking for something like this so i can use it to count down my time left on my Tacho.
Problem is, when its done, the alarm is too quiet. Would you be able to ask on the forum if he could make a configurable alarm sound so i could choose my own sound for example.
Also if you could make the count down time in full screen would be great.
Obviously all this is if you get the chance. Dont worry if you dont
Thanks for posting though, still useful.
Click to expand...
Click to collapse
I found if you hold stylus on the white part you get a menu that pops up. It allows you to set the stopwatch color (of the digits) and change the alarm. Those it seems the alarm sound has to be a windows media format. the only other option I had from my device was the dogbark file.
It limited but something.
Any chance on getting a screenshot of this app at all?
Sean D. said:
Any chance on getting a screenshot of this app at all?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Surur
just thought I'd mention, it's a nice looking App, but doesn't wake the device from standby, works well though.
Paul
Thank you very much.
StopTime
I'll put a shout out for StopTime!
http://home.comcast.net/~jonsachs/#StopTime 2.0
It's free, and you can use any sound you want for the alarm (I think)
Has anyone used this successfully? DOES IT wake up the device when it is off?
Finally, the first post leads to a page that doesn't exist. Is this the same as Jonathan Sach's StopTime?
SPBTime is great!!! Try it.
G-Alarm and G-Watch are my favorites! Have a look at
http://www.ageye.de/index.php?s=galarm/about
http://www.ageye.de/index.php?s=gwatch/about
or Development+Hacking Thread
omaralt said:
hey guys, i've been looking for a stopwatch/timer program for my tilt for a while, and finally found a great free program.
credit goes to frankyB over at howardforums
omar
Click to expand...
Click to collapse
Simple and very functional.
Works great on my Touch vogues.
Thanks a lot.
windows mobile 6.1
Has anybody used this program with windows mobile 6.1? Has anybody gotten it to work even when phone goes to sleep? Thanks in advance.
bumblefreak said:
Has anybody used this program with windows mobile 6.1? Has anybody gotten it to work even when phone goes to sleep? Thanks in advance.
Click to expand...
Click to collapse
Me. I use WM 6.1 with this soft flawlessly. It keeps counting properly after Off-on or Sleep-on.
I'm looking for something where I can configure an alarm every 30 seconds or so. Anyone know of anything, I want functionality similar to the stopwatch Timer '08 for my Mac.
problems with Stopwatch
I downloaded the Stopwatch cab to my Fuze and found several problems.
1. It only goes to the second. Not much use for timing laps on the track, etc.
2. The Start/Stop button was partially covered by the Reset button.
jost said:
G-Alarm and G-Watch are my favorites! Have a look at
http://www.ageye.de/index.php?s=galarm/about
http://www.ageye.de/index.php?s=gwatch/about
or Development+Hacking Thread
Click to expand...
Click to collapse
Cool apps. Thanks!
has anyone seen something similar that also sits on the today screen?
I'm off on a holiday in 3 months and want to know how many days till I go just by looking at my phone (without opening a program hence the today screen) I have searched the forums for a few weeks but haven't found anything yet (but that could just be my searching technique!!).
ideally to fit WVGA screen size
cheers
Update:
I also posted here..
http://forum.xda-developers.com/showthread.php?t=473464
and my query has been resolved.
Thanks to a few people in my FSD Call Capturer thread, I've started thinking about a possible SMS interceptor with a more finger freindly design. I've already got the hard part coded (as in, I can capture the SMS messages) but I have no graphics talent of my own, and I'm not that inventive, so, who wants to give me some ideas?
Thanks in advance!
Source code is in post 41 and post 42.
Id like to see a Full screen contact photo with incoming SMS. Thanks!
Hi L3v5y,
1) if it's posisble disable the system notification.
2) Make an apps who show the sms and 2 or 3 button (Reply, Delete, Close).
I think it's a good idea but you are the dev..
ok here is what i would try to do if i knew how 2
1.Have a pic of the contact shown on the left side of the screen next to the number it came from
2. a scrollable box to show the message received
3. a empty text box at the bottom for quickreply
4. button for dismiss/delete(When clicked would ask if you wish to delete)
5.Button from full reply(in case you want to add pics or clipart)
have it time out after 10 or so sec of screen not being touched
see drawing for a very ruff image of what i'm picturing(keep in mind i'm no graphic artist and did this in about 2min at work using MS paint)
Something like this...?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Great Work Oseven...
Made it with 3 button...
Grodimn :
No text box.... for send mesend message... because where is your keyboard....?????
I Think only for read message and if you click to reply your "normal sms writer are open "
Sorry for my english....
Maybe a combination of Osevens and Grondinms ideas? As in you tap a button to go to the reply screen.
Unfortunately, transperency is difficult to achieve without serious processor usage (that, and I don't know how!)
So, I could do something like that, but it draws a backgound image (customisable, of course) and then has the message icon infront with text. Then, have two or three buttons (reply, delete, mark as read etc) and an auto close function. If the reply is pressed, a screen like Grondinms pops up (although bare in mind there would have to be space for the SIP)
You can disable the SMS notifications under Start->settings->Sounds and Notifiactions, but I could maybe do a config app for that...
l3v5y said:
Maybe a combination of Osevens and Grondinms ideas? As in you tap a button to go to the reply screen.
Unfortunately, transperency is difficult to achieve without serious processor usage (that, and I don't know how!)
So, I could do something like that, but it draws a backgound image (customisable, of course) and then has the message icon infront with text. Then, have two or three buttons (reply, delete, mark as read etc) and an auto close function. If the reply is pressed, a screen like Grondinms pops up (although bare in mind there would have to be space for the SIP)
You can disable the SMS notifications under Start->settings->Sounds and Notifiactions, but I could maybe do a config app for that...
Click to expand...
Click to collapse
Sounds good. If this goes any further I'm more than happy to supply the graphics if you'd like.
I'm working on a very basic GUI ATM!
Oooh! My 3800 post!
lol yhea i was kinda forgeting the keyboard...so then what about having the received message at the bottom and the reply at the top that way you can still see with the keyboard.....
let me see what i can come up with in photoshop.
kidnamedAlbert said:
let me see what i can come up with in photoshop.
Click to expand...
Click to collapse
Photoshop wizards...
this is what i came up with.
its a little umm i dont know how to explain but id like sms like this.
kidnamedAlbert said:
this is what i came up with.
its a little umm i dont know how to explain but id like sms like this.
Click to expand...
Click to collapse
So, an SMS conversation with nice bits...
l3v5y said:
So, an SMS conversation with nice bits...
Click to expand...
Click to collapse
yeah.
i just still wish i could get a today plugin.
but no creates one yet.
like throttle launcher's sms on today is great! but i dont want throtle launcher.
kidnamedAlbert said:
yeah.
like throttle launcher's sms on today is great! but i dont want throtle launcher.
Click to expand...
Click to collapse
Neither. I tried it yesterday and although it's a great app it's just too slow, which is why I suggested what I did as it takes one of the things from it that I liked but won't slow the system as much.
Problem is, today plugins need C++, which I don't know!
l3v5y said:
Problem is, today plugins need C++, which I don't know!
Click to expand...
Click to collapse
Is something possible where it takes a temporary screenshot of whatever is running at that time and makes it the background? I don't know how feasible that would be, or how fast it would run if it was possible..?
oseven said:
Is something possible where it takes a temporary screenshot of whatever is running at that time and makes it the background? I don't know how feasible that would be, or how fast it would run if it was possible..?
Click to expand...
Click to collapse
Possible.
Lemme get the core functionality working first!
might even be able to do a plugin with rl today, mortscript, sms export, etc. like how chriscsh did with xiamultitheme
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So this isn't really a "Diamond" application, but this is the only forum I post in, and I wanted to share this so maybe other people can find it useful.
While I was checking out of the grocery store tonight, I realized I had left my "preferred savings" card in my car's glove compartment as usual. Naturally, my train of thought derailed into Windows Mobile development and how I could make my life easier. The answer was simple: why can't I save all my card bar codes on my Windows Mobile Device and have the cashier scan the image from my cell phone? It would save wallet space and be really cool to boot!
So obviously, I came home and whipped up a program to do just that. Any cards that you scan with a bar code reader can now easily be imported and stored on your phone!
Click here to read more about the Bar Code Manager and the Bar Code API.
does this work,
I thought due the the polarised nature of LCD screens they would be unreadable by most barcode readers!
I hope so! I'm going to check tomorrow when I head into the office. We have a couple bar code readers laying around.
Good idea! Unfortunately, most bar code readers won't read backlit displays
Glad you boys mentioned this!
Ive beennn doing this ever since my Nokia 7710. I caried my "ID" on my 7710. When ever I was asked fo ID i just pulled put my 7710.
Sooo yes this can be done on any Barcode-ID app.
Boys time to leave that ID home!
They wont even know the Difference with that GORGEous VGA Screen!!!!
Cheers Bradas!!!
This doesnt seem to work with my norwegian bar codes, dunno if we use another standard than you, or not.
2912340005882
157100395
2 983061310951
When entering these i get a NullReferenceException in RefreshBarCode()
WindowsLessControls.StandardBitmap.get_Width()
Weird, the first and the third number worked for me (try redownloading the CAB). The program really only supports 12 digit bar codes though (UPC). I haven't written in support for other formats yet (Code 39, etc).
Koush said:
Weird, the first and the third number worked for me (try redownloading the CAB). The program really only supports 12 digit bar codes though (UPC). I haven't written in support for other formats yet (Code 39, etc).
Click to expand...
Click to collapse
Doesn't seem to want to work with my cooked ROM. I get 'An unexpected error has occurred in WMBarCode.exe. Select Quit and then restart this program.'
And when I restart, I get the screen in the image.
Anyone else confirm this?
A nice next step would be to scan the barcodes with the onboard camera.
jentech said:
Doesn't seem to want to work with my cooked ROM. I get 'An unexpected error has occurred in WMBarCode.exe. Select Quit and then restart this program.'
And when I restart, I get the screen in the image.
Anyone else confirm this?
Click to expand...
Click to collapse
I have the SAME problem as this. Running Tilt 2 with 6.5 stock rom
Does this require anything other than the cab for download at the link?
says "Download the Bar Code Manager and API here"
What is the API? I REALLY want to use this app
I have installed this and typed the number from a store card. Where do I type the name for the card? After typing in the number in the one edit box the barcode, on screen, does not resemble the barcode on the card. If I type any text in the edit box I get "An unexpected error has occured in WMBaeCode.exe" NullReferenceException
Help!
Same stuff happening here on ever rom ive tried. I really want sometihng like this
Can someone post a mirror? The website linked is not working.
Do you think you can provide a slightly better tutorial on how to set up your cards. I can't get any of mine to work, and not all grocery store cards are 12 digits. Any way you can add support for those?
Great program, I've been using it for a long time now and I don't know if there's any development on this, but it would be great for it to support 2D codes too. Thanks
02/06/2012: 1.5 has been out a few weeks now. just forgot to update this thread. You can read about the new feature in the main thread.
http://forum.xda-developers.com/showthread.php?t=1475679
12/19/2011: New version updated 1.0.3. GUI update and added tons of data.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi,
My first android device was a nook color and purchased on day one. This was the forum that got me all started to develop on the android platform. Since then I have worked on a location base app that make full use of Google map to find locations nearby. It has been fully tested with the Nook color using CynogenMod 7. It probably works with other flavors but I haven't test it yet. Please comment if it works/doesn't work in other Nook color Mods.
BTW it is FREE of course.
Here is the link to the app posting:
http://forum.xda-developers.com/showthread.php?t=1475679
Thank you to all who have inspired me!
F8
If you've posted it early last week, I would have tried it already. Now, I'm back.
Anyway, thanks for app, keep it going. I'll give it a try later.
Hi Votinh,
please do give it a try and any input you might have will be appreciated.
Thanks,
F8
I tried to use it over the thanks giving weekend driving between LA and San Diego. Saved some time to look for diapers in a nearby Target store
BTW though your description says "* Featuring "Peek ahead" at other destinations." I could not find it. I could pan the map, but did not see any stores beyond certain point. Is it limited by distance? Say
it would be nice if I can look ahead for destinations e.g. I'm in between San Diego and Carlsbad on I5 and I want to find stores in Carlsbad, well specifically Dunkin Donuts. Having directions to that place from my location would be nice too.
dumble_bee,
If you know where you are heading, you can pan the map to the location, touch the map and hold(2 seconds). It will center where you touched and will display what is near by based on the new location. You can also increase the viewing radius setting in preference to see further out, but you probably already know that.
Hope this helps.
F8
OK, I tried that, but then how do I go back? After a while it goes back to the old place. I have to then "touch and hold" again and again. Bit annoying.
This has potential, but why no support for landscape? I'd love to see that!
dumble_bee said:
OK, I tried that, but then how do I go back? After a while it goes back to the old place. I have to then "touch and hold" again and again. Bit annoying.
Click to expand...
Click to collapse
dumble bee,
When you pan the map or center on a different location, it will recenter after 60 seconds when you no longer interact with it. But if you like to go back to your former location, you can just Tap Tap(tap the screen two time quickly), it should put you back right away.
Hope this help,
F8
Thanks Mate! I understand. Just have to finger the thing from keep moving.
A food for thought, maybe something you can provide as a feature and name it after me
it'd be nice to remember my choices of press-&-hold, bring those up and let me select one, I usually move and look ahead at limited area's, mostly starbucks at a location that I'll be meeting my clients.
craigbru said:
This has potential, but why no support for landscape? I'd love to see that!
Click to expand...
Click to collapse
Will put this on our todo list. Thanks for trying this out.
Android Market won't let me install this, says it's incompatible with Bn NookColor; is there some tweak I need to do to get around that?
zarquon7 said:
Android Market won't let me install this, says it's incompatible with Bn NookColor; is there some tweak I need to do to get around that?
Click to expand...
Click to collapse
Do you have problem with installing any app in the market or just this one ? Are you running CM7 ?
F8
zarquon7 said:
Android Market won't let me install this, says it's incompatible with Bn NookColor; is there some tweak I need to do to get around that?
Click to expand...
Click to collapse
Worked for me::
http://bookclubs.barnesandnoble.com...y-incompatible-with-my-rooted-NC/td-p/1135222
Version 1.5.0
http://forum.xda-developers.com/showthread.php?t=1475679
Slick in performance, added social tagging. All 100% user driven platform/framework. You can add deals/bargains that will be instantly visible to other users. You can also share the app and deals on social network
Please do check it out.
Updated the thread to reflect the new version.
Enjoy.