I have buy my hd7 in france,flashed already with a new rom 1.60 on xda,i know what todo in most of the cases,i have tryed bootloader but when i plugin usb he does not reconize my device,also the double fail sound play when i plugin?
zune is working properly and recongnize my device properly,also have done the first februari update without any problem via zune.
I have seen another thread where people say that the phone was stolen,ridiculous!
i run win7 x64
So Please help so i can flash new radio
edit: I think it is because of usb3 maybe,on my other laptop it is working fine but here on my new one i have usb3,do i need specific drivers to can connect?
i can't believe,are we on xda?as no one a solution for this?
is it possible because of chevron?because win7 x64?come on guys help please?
I have always error 260 when i try to flash a rom ,why the rest is working properly?
I got the same as you on my work laptop but not on my home one, both have win7 64bits. Only difference between the 2 is that I've upgraded my work laptop to Win7 SP1 which just came out.
So my question is, have you also upgraded to win7 sp1? I think it might be the problem, I'm anyway planning a clean install of my work laptop this week-end with SP1 and will post the results afterwards to see if it's related to that upgrade.
jemaho said:
I got the same as you on my work laptop but not on my home one, both have win7 64bits. Only difference between the 2 is that I've upgraded my work laptop to Win7 SP1 which just came out.
So my question is, have you also upgraded to win7 sp1? I think it might be the problem, I'm anyway planning a clean install of my work laptop this week-end with SP1 and will post the results afterwards to see if it's related to that upgrade.
Click to expand...
Click to collapse
i think i have done the update yes,thanks to post your results because im still not able to connect today...
im pretty shure we need to change some drivers because it's working well on my other pc win7 x86 insteed of x64 where it is not working....
i really need a solution guys
the service pack 1 was not installed and it was not working also so you have to try,i have tried and not working
i think i need drivers for usb3 because my laptop is usb3,does someone know if there are some drivers for usb3 so i can recognize my device when plugin.
THX
So, after reinstalling my laptop (win7SP1- 64 bits) I wasn't still able to flash anything, and I saw that by going to the bootloader, Windows was trying to load qualcomm cdma drivers. And it popped out into my mind, I had removed WMDC, thinking I wouldn't need it anymore.
So by reinstalling WDMC (windows mobile device center), it installed again the needed drivers for the pone to be recognised into the bootloader, and voilà, working again.
Hope this will help you out too.
jemaho said:
So, after reinstalling my laptop (win7SP1- 64 bits) I wasn't still able to flash anything, and I saw that by going to the bootloader, Windows was trying to load qualcomm cdma drivers. And it popped out into my mind, I had removed WMDC, thinking I wouldn't need it anymore.
So by reinstalling WDMC (windows mobile device center), it installed again the needed drivers for the pone to be recognised into the bootloader, and voilà, working again.
Hope this will help you out too.
Click to expand...
Click to collapse
Hey mate thanks for the feedback,i try and report here later
djcedric said:
i think i need drivers for usb3 because my laptop is usb3,does someone know if there are some drivers for usb3 so i can recognize my device when plugin.
THX
Click to expand...
Click to collapse
Hi,
If you have eSata connection you have USB2. I have a DELL with USB3 as well, so USB3 doesn't work but by eSata everything works fine.
PanNet said:
Hi,
If you have eSata connection you have USB2. I have a DELL with USB3 as well, so USB3 doesn't work but by eSata everything works fine.
Click to expand...
Click to collapse
how do you mean esata,is there a cable from esata to micro usb?can you explane please?
Related
Has anyone got this to work? No one mentions Win7 in the thread about replacing drivers to get Vista to work and don't want to mess up my ActiveSync (which works) if I have another choice? Any advice would be great!
P.S. I don't have a XP machine available, converted both to Win7 beta.
I would like to think there would be no problem you'll use the same WMDC as vista, but if you not sure flash the rom from the sd card, just rename it to blacimg.nbh (.nhb whatever? lol) and copy it to the SD main directory, once you enter bootloader follow the on screen instructions and it will flash the rom, I prefer this as it is faster then using the pc
Windows 7 is working excellent
mkent_barbados said:
Has anyone got this to work? No one mentions Win7 in the thread about replacing drivers to get Vista to work and don't want to mess up my ActiveSync (which works) if I have another choice? Any advice would be great!
P.S. I don't have a XP machine available, converted both to Win7 beta.
Click to expand...
Click to collapse
Hello,
I have a Windows 7 latest build working. Just install WDMC (same version as vista mentioned above!)
It's working without any modifications and even much more stable then vista. It uses also less memory then Vista.
It is a very good choice apart from Windows XP -> Vista is the Beta version of Windows 7!!! ;-)
Many Thanks
Roman
mkent_barbados said:
Has anyone got this to work? No one mentions Win7 in the thread about replacing drivers to get Vista to work and don't want to mess up my ActiveSync (which works) if I have another choice? Any advice would be great!
P.S. I don't have a XP machine available, converted both to Win7 beta.
Click to expand...
Click to collapse
I had nearly every build of windows 7 started with 6801 over beta 1 (7000) up to 7068 now and it worked on every version 32bit and 64bit! Just use the mobile device center ;-)
I've had no problems with win 7 synched to my Touch phone
No Problems with Win 7 no need to install anything to contact phone just use the mobile device center.
Ditto, works perfectly. You'll find Windows 7 installs some drivers the first time you connect your phone which may mean your flash times out while it waits. Just let the drivers install and the re-run the RUU and it'll start to flash
Running Windows 7 RC1 (7068) and no issues whatsoever
i couldnt HardSPL on windows 7 but other than that it works great with the HD.
I was trying to use USPL and that doesn't work (get USB in bootloader but the exe fails as can't find the usb port), guess I could try HardSPL but liked the idea of USPL. can you run USPL from the memory card?
did you change the usb drivers to the old ones? and turn off usb in active sync (on the pc)
I've done it on Windows 7 like the other users with no issues.
mkent_barbados said:
Has anyone got this to work? No one mentions Win7 in the thread about replacing drivers to get Vista to work and don't want to mess up my ActiveSync (which works) if I have another choice? Any advice would be great!
P.S. I don't have a XP machine available, converted both to Win7 beta.
Click to expand...
Click to collapse
i am using win 7 RC, no issue with any thing~ flash, sync, charge, share internet.
mkent_barbados said:
I was trying to use USPL and that doesn't work (get USB in bootloader but the exe fails as can't find the usb port), guess I could try HardSPL but liked the idea of USPL. can you run USPL from the memory card?
Click to expand...
Click to collapse
Install Vmware Workstation 6.5 and then create a new windows XP virtual machine.
Map you usb to the VM whenever you want to flash using USPL and not only. It works perfect!
ok thanks guys, sounds like using the old drivers will work, but Vmware sounds like a perfect solution will try that.
Ca5c4d3 said:
Running Windows 7 RC1 (7068) and no issues whatsoever
Click to expand...
Click to collapse
If you don't mind may I ask where you get the download for RC1 7068? I tried through MS site and got a license key but no download link, it said download was no longer available. Would like to try it.
works fine on build 7048
hanlence said:
i am using win 7 RC, no issue with any thing~ flash, sync, charge, share internet.
Click to expand...
Click to collapse
This is funny.... I would love to know how you have RC1 when its not even been produced yet / hit testing stages of RC
To clear up some comments on Windows RC1. The leaked version of Windows 7 build 7068 in the license agreement says Release Candidate so people are thinking its RC1.
No biggie.
For those who want to upgrade from a previous version of Windows 7 Beta to Build 7068 understand that it WILL break your Windows Mobile Center 6.1 - when it tells you that its not compatible with the 6.1 version in the upgrade it means it. Don't mess with it. Install a fresh copy or you will not get it to work. Even if you download the 6.1 version to re-install.
For those who are installing the HTC for the first time it will say that it cannot find it. That's okay. Once it cannot find it - refresh your windows update and it will find a new driver. once that is installed it will try to install a another driver and it can't find that one. Refresh Update again and it will then find the final driver and Windows Mobile Center will recognize the Touch HD.
Guys, I have ActiveSync working (I am on Win7 7000 however) but was trying to flash (and yes, I had 'unticked' allow USB). This is what was failing. Can't find an XP disc so will try the older drivers as per the solution for Vista. Thanks for all the help.
search for VistaRUU on google for the older driver. It should work just fine under windows 7, I've used it to flash my friends' hermes.
Hello, i use vista and just flashed from olix to the original. And now is the new problem, when i try to install uspl from my vista laptop i get this error :
HTC Blackstone USPL version 2.5, Apr 5 2009
Opening USB port \\?\usb#vid_0bb4&pid_00ce#5&614d2ba&0&1#{25dbce51-6c8f-4a72-8a6
d-b54c2b4fc835}...
WARNING: Port \\?\usb#vid_0bb4&pid_00ce#5&614d2ba&0&1#{25dbce51-6c8f-4a72-8a6d-b
54c2b4fc835} parameters could not be set
WARNING: Port \\?\usb#vid_0bb4&pid_00ce#5&614d2ba&0&1#{25dbce51-6c8f-4a72-8a6d-b
54c2b4fc835} timeouts could not be set
ERROR: No response from device
HTCSBye!>.L.HTCE
Bootloader on USB on my phone
im happy if someone could help me with this problem
Are you Vista x64 or Vista x86? Either way check the information on step (0) of the guide in my signature. You need to update the driver for your HTC USB Sync.
Hello. Verry good guide im running vista 32 bit and try to install driver, but windows said the driver is good HTC Driver, ive install a vista driver from this forum a few monthes ago. It look like the usb driver is working because i use this vista laptop to flash roms.
das-kvant said:
Hello. Verry good guide im running vista 32 bit and try to install driver, but windows said the driver is good HTC Driver, ive install a vista driver from this forum a few monthes ago. It look like the usb driver is working because i use this vista laptop to flash roms.
Click to expand...
Click to collapse
Ahh, ok. Do you have antivirus running? It can also interfere with USPL. If so, try disabling it temporarily and try again...
No problem in Vista 32-bit (many times), if you use this guide : http://www.modaco.com/content/windows-mobile-news/252977/ruu-on-vista-it-can-be-done-the-ultimate-guide/
It`s from Duttys guide.
you need to revert to the old drivers even if vista tells you that you have a good driver
I did everything that is possible and on Vista x64 I can't make it work! BTW The 64 bit Vista SP1 wants Digitally signed driver and the one provided is not!
OrionBG said:
BTW The 64 bit Vista SP1 wants Digitally signed driver and the one provided is not!
Click to expand...
Click to collapse
You can just disable this "feature", google for it.
OrionBG said:
I did everything that is possible and on Vista x64 I can't make it work! BTW The 64 bit Vista SP1 wants Digitally signed driver and the one provided is not!
Click to expand...
Click to collapse
This is true. You can get around this by following step (0a) of the guide in my signature.
malson said:
No problem in Vista 32-bit (many times), if you use this guide : http://www.modaco.com/content/windows-mobile-news/252977/ruu-on-vista-it-can-be-done-the-ultimate-guide/
It`s from Duttys guide.
Click to expand...
Click to collapse
where can i get the 64-bit drivers?
Thanks!
edit: found it in the guide from cRaCKwHoRe
edit2: with vista 64bit the uspl-window disappears immediately if i start blac_uspl.exe (v2.4). i've updated the usb drivers
Nersta said:
where can i get the 64-bit drivers?
Thanks!
edit: found it in the guide from cRaCKwHoRe
edit2: with vista 64bit the uspl-window disappears immediately if i start blac_uspl.exe (v2.4). i've updated the usb drivers
Click to expand...
Click to collapse
Run it from a command prompt window instead so you can see the error text before it disappears
if i run it from the command prompt i got exactely the same error like the threatauthor. then i tried some things and now it works! i don't know what i ve done
thanks a lot for the help
btw, very good guide!
i also got the error message "no response from device"
i have the old driver (from 2009) installed.
also vista, but 32bit
anybode can help?
I have actually followed the guidance on modaco earlier and have successfully installed cooked ROM on my HD using USPL, but after upgrading to 1.56 now when I try to follow the guide and install the driver an error msg comes up saying "Windows has encountered a problem" and the driver does not get installed. I have no idea why it is not working as I know that I have done everything right, and btw I have 32 bit vista. Can anybody help? For the time being using HSPL, but would like to have stock SPL instead.
Try to change the USP port where you phone is connected. Just connect the cable to other port. This helped me once.
try this:
in your command prompt window (which you have set to run as administrator), navigate to where the exe is.
then type blac_uspl.exe (i think thats what its called) BUT DONT HIT ENTER
then, put the usb cable into your touch hd. as soon as it says USB in bootloader mode, hit enter and it ought to work then, provided you do it quick enough.
this worked for me when i had the same issue.
weird.
i tried to flash it about 15 times. 10 times this erroer message. then i was able to install uspl! wow.. but the flash-process stopped at 0%.
so i tried again and again and then it ahppened. i flashed that stupid rom
i didnt chance anything. i just did the same as before. so i dondst know what the exact problem was.
but ok. wating for the next rom which i wanna flash
thanks for your help!
I am running the new 64-bit, Release Candidate of Windows 7. Despite booting to allow unsigned drivers (F8 on boot-time), Windows 7 still rejects the USPL driver. I did browse to the USPL GUI driver for 64 bit. Worked fine on previous Windows 7 beta.
Anyone else have trouble?
did you try running in compatible modus??
On the file properties.....
Did you try downgrading your drivers?
I had no problem with HSPL, but with USPL I had to downgrade drivers, which casued all sorts of problems when trying to do normal operations with WMDC.
johnshep ...
Have you tried the new Windows 7's XP Mode feature ...?
... review here ... and ... download here ...
Works like charm on my PC, running x64 W7, build 7068.
Guide by Digital Outcast in first page
PLs read the Dummies guide written by the great "Digital Outcast" and you shall know what your problem is and how to solve it, it really helped me i am also using win7 x64 release candidate 7100 build. pls read the wiki for more info. have a nice time flashing
i did it just how i'd being doing it in vista and it worked just fine. My only problem was my internet security suite being overzealous.
Since it's actually a command line application, I don't think the compatibility feature is available...will try when get home from work. If this is expereinced by othjers, weill need new way to run USPL. I did notice there were updated drivers for our phones, in RC1, but you still can't flash using those new drivers from Microsoft
johnshep said:
Since it's actually a command line application, I don't think the compatibility feature is available...will try when get home from work. If this is expereinced by othjers, weill need new way to run USPL. I did notice there were updated drivers for our phones, in RC1, but you still can't flash using those new drivers from Microsoft
Click to expand...
Click to collapse
You should try reading my guide as well as my USPL GUI application. They are both linked in my signature. I am running Windows 7 RC 1 (build 7100) on both 32 and 64-bit. I have a dual-boot configuration and the drivers, USPL via command prompt, and USPL via my GUI all work fine for me on both installations. Are you sure you did the process right?
Did anyone try Windows 7's XP mode?
stepw said:
Did anyone try Windows 7's XP mode?
Click to expand...
Click to collapse
Yes, works quite well
Digital Outcast said:
Yes, works quite well
Click to expand...
Click to collapse
Hmm, I've updated to Win7 x64 yesterday, been trying to USLP via Winxp mode but with no success
Can anyone help me?!?!
onesolo said:
Hmm, I've updated to Win7 x64 yesterday, been trying to USLP via Winxp mode but with no success
Can anyone help me?!?!
Click to expand...
Click to collapse
I have win7 x64 and i just use USPL normally, but first i log onto windows without the digital sign driver and then updating the Mobile drivers to the ones found on this forum and it works like a charm... No need to run under XP mode
Hello,
Yesterday I tried to flash my phone. First I read al the info here and also watched some videos at youtube. I have a iMac and use parallels to run Windows XP. I can sync without any problems through Activesync. The usb is plugged in at the back of the iMac.
So I started the hsplwrapper from olinex. Everything went okay until I got the tricolour screen including text 'usb'. Then the usb connection stopped and the phone could not be flashed.
Checked the issues on the forum.
I tried different usb ports a sspl-manual with no results. Also restarting pc, hard reset on phone also nothing.
Maybe it is not possible because I use windows through parallels? Or do I have to use a cradle instead of a plain usb cable?
Does someone have a clue?
Unplug the USB cable after running uSPL or HardSPL, then plug it back and wait till USB comes on the screen again.
Maybe search for the proper HTC drivers for Windows XP.
Reply
Thank you I will try this.
blackstone ruu is known to stop functioning using xp running on parallels..
ull need a pc to update to hspl and then u can use the sdcard to flash in future..
try instead of parallels using boot camp with the updated drivers, maybe this can help..
Is there also an other alternative virtual maschine for Imac that is more stable for performing this task?
If possible I do not want to use bootcamp.
watertijger said:
Is there also an other alternative virtual maschine for Imac that is more stable for performing this task?
If possible I do not want to use bootcamp.
Click to expand...
Click to collapse
well parallels and vmware actually limit the xp capabilities..
for full functioning there is only boot camp yet..
Okay then I will give bootcamp a try
Thanks for the tip!
watertijger said:
Okay then I will give bootcamp a try
Thanks for the tip!
Click to expand...
Click to collapse
gud luck and do post the results...
Luckely I still have some older desktop windows pc and tried there to flash it and it works without any errors ... so thank you all for the help and I am looking forward to all new roms!
are you unlocking your phone, or trying to flash a rom? if its a rom , just name it BLACIMG.nbh and copy it to the root of your SD card. then reboot your phone while holding down the "volume down" button.
Well I flashed a rom and now I'm enjoying the new 6.5 wm and it works fine.
watertijger said:
Well I flashed a rom and now I'm enjoying the new 6.5 wm and it works fine.
Click to expand...
Click to collapse
happy for u dude..
nd mainly.. HAPPY FLASHIN!!!!
Hi,
I am trying to use activesync with:
1.-STOCK X1a from rogers
2.- Windows 7 x64 ultimate
3.- Windows Mobile device center 6.1.6965
Windows do not recognize the X1 in activesync mode ( even without the check in advance) and it does not work as a disk device.
What driver should be use by windows 7 for the x1a? is there an how to describing the procedure I should follow?
regards,
Daluv
Weird.
I have Xperia X1i and i'm using Windows 7 64-bit Professional edition.
When I connect my device to the computer, windows 7 recognize an unknown device & will check online for drivers & install them immediately.
But maybe you should connect your X1 & run Windows Update, maybe this will help
Already tried that. thanx.
can you show me a device manager screenshot with the x1 selected?
thanx
hence why I am looking for a more formal approach to make sure every step is fine...
****head said:
Weird.
I have Xperia X1i and i'm using Windows 7 64-bit Professional edition.
When I connect my device to the computer, windows 7 recognize an unknown device & will check online for drivers & install them immediately.
But maybe you should connect your X1 & run Windows Update, maybe this will help
Click to expand...
Click to collapse
also don't have any issues with
1.-STOCK X1a sonyE generic
2.- Windows 7 x64 ultimate
3.- Windows Mobile device center 6.1.6965
could be the usb drivers on the pc
one thing you could try is if the pc have bluetooth to see if you can activesync over that
Rudegar said:
also don't have any issues with
1.-STOCK X1a sonyE generic
2.- Windows 7 x64 ultimate
3.- Windows Mobile device center 6.1.6965
could be the usb drivers on the pc
one thing you could try is if the pc have bluetooth to see if you can activesync over that
Click to expand...
Click to collapse
seem to work over bluetooth.... how would I solve the usb problem?
maybe look for new drivers for your motherboard on the manufacturers site or the manufacturers of the chipset the motherboard use
of cause after you verified that windows mobile device center->mobile device settings->connection settins
got usb checked on
yeah usb is check on in windows mobile device center.
Rudegar said:
maybe look for new drivers for your motherboard on the manufacturers site or the manufacturers of the chipset the motherboard use
of cause after you verified that windows mobile device center->mobile device settings->connection settins
got usb checked on
Click to expand...
Click to collapse
Sorry for late response, but are you using a custom rom or is it running on official rom?
If you're using a custom rom with HTC Sense/Manila on it, U might check which USB connection type you have.
stock ROM from rogers.
****head said:
Sorry for late response, but are you using a custom rom or is it running on official rom?
If you're using a custom rom with HTC Sense/Manila on it, U might check which USB connection type you have.
Click to expand...
Click to collapse
Daluv said:
stock ROM from rogers.
Click to expand...
Click to collapse
mhm..Weird.
Have you tried it with another computer?
Maybe a non 64-bit windows?
does work with a 32bits XP.
even simple USB disk acces in windows 7 64 bits does not work. So the USB driver going crazy is possible. Cant find any USB driver. for my machine and I am unable to locate what chipset that machine is using..
****head said:
mhm..Weird.
Have you tried it with another computer?
Maybe a non 64-bit windows?
Click to expand...
Click to collapse
That's exactly what is you issue. You need the drivers for your motherboard chipset to get everything working correctly, and this can be a big issue on Seven 64 bits. This is the main reason why I had to use Seven 32 bits (changing my pc was not an option at the time I bought my Seven licence).
Ok i will try to solve that first. thanx.
Trudi said:
That's exactly what is you issue. You need the drivers for your motherboard chipset to get everything working correctly, and this can be a big issue on Seven 64 bits. This is the main reason why I had to use Seven 32 bits (changing my pc was not an option at the time I bought my Seven licence).
Click to expand...
Click to collapse
damm dell PC. I have a dell XPS 435T i7 920 but there is no update for the chipset according to dell. i am unable to find what chipset I have?
Daluv said:
Ok i will try to solve that first. thanx.
Click to expand...
Click to collapse
Daluv said:
damm dell PC. I have a dell XPS 435T i7 920 but there is no update for the chipset according to dell. i am unable to find what chipset I have?
Click to expand...
Click to collapse
OH yeah I don't love Dell neither.
But did it work with Vista 64, because Vista & W7 should work (almost) the same.
But most PC does have 2 USB slots in the front of their tower & 4 at the back.
Did you try one of the 4 on the back side?
If it doesn't help, I would say, maybe you should install & another OS besides W7 64-bit
cant change my work PC... I only use linux at home so I have 0 problem.
Mart
****head said:
OH yeah I don't love Dell neither.
But did it work with Vista 64, because Vista & W7 should work (almost) the same.
But most PC does have 2 USB slots in the front of their tower & 4 at the back.
Did you try one of the 4 on the back side?
If it doesn't help, I would say, maybe you should install & another OS besides W7 64-bit
Click to expand...
Click to collapse