As I have posted in a development thread about rooting..
Alright guys, I have a problem. And there is very little info about doing this on a Mac
I have created the autonooter2 sd card using terminal.
My nookcolor is powered off, sd card inserted, nook USB cable plugged in to nook and then computer. (nook symbol lights up on cord), my mac pops up and shows a RNDIS ethernet device
-1 st problem, It says on nookdevs that this RNDIS dialog will pop up and to ignore it...does that mean ignore it, leave it there or click cancel? I have tried ignoring for a while and then clicking cancel.
- It says both here on xda and there that when the autonooter is finished the nook should reboot itself..its been 10 mins this never happens??
any help is appreciated
edit:
alright I just unplugged the USB and turned on my nook and it brought me to the Android setup screen. I skipped the tutorial and sign in and checked both location boxes and then when I clicked continue the screen flashed and it threw me into the normal B&N interface and the nook color user guide automatically popped open and starts flipping pages rapidly. I can close out of the user guide but then it auto reopens :/
edit2: restarted , everything appears to be working alright except I cannot pull up a keyboard in any instance...searching store or through books
edit3: i have tried erasing and un registering my device. my nook is now unregistered. I have been trying to get rid of root. i have cleared data ( power+ volume + nook button) but I cannot factory reset using 8 reboot method.
My device is on, has NookColor settings under extras but I have no keyboard and cannot connect to wifi or re register..
Please.... help
You should register your NC prior to rooting it. You can restore your nook to its fresh state by interrupting the reboot process 8 times or, using the Android Debug Bridge (instructions for enabling it here: nookdevs.com/NookColor_USB_ADB) by following these instructions: nookdevs.com/Flash_back_to_clean_stock_ROM. Once you're done with that, register your Nook and then follow the AutoNooter instructions (nookdevs.com/NookColor_Rooting). Note: autonooter will reboot by itself once it's done; don't interrupt it by restarting the nook by yourself!
Ok quick question..
I figured I could not do any more harm so I started the autonooter process over from start to finish remaking the sd card but this time on a PC.
Everything worked better, the nook auto restarted itself and I got the Nook Color Dev screen and then to the unlock screen. I unlocked, ready to do the next steps (skipping tutorial and skipping gmail sign in) but I was never prompted. I am just at the normal nook homescreen, I now have much more options in extra( superuser, email, etc) and also the soft keys but I still do not have a keyboard.
Since I did this autonootering from an unregistered device do I need to start completely over?
Thank you for your response
foethalove said:
Ok quick question..
I figured I could not do any more harm so I started the autonooter process over from start to finish remaking the sd card but this time on a PC.
Everything worked better, the nook auto restarted itself and I got the Nook Color Dev screen and then to the unlock screen. I unlocked, ready to do the next steps (skipping tutorial and skipping gmail sign in) but I was never prompted. I am just at the normal nook homescreen, I now have much more options in extra( superuser, email, etc) and also the soft keys but I still do not have a keyboard.
Since I did this autonootering from an unregistered device do I need to start completely over?
Thank you for your response
Click to expand...
Click to collapse
It doesn't sound like you have anything resembling a paperweight, I'm sure you'll get it to where you want it.
Did you try the steps of signing in youtube then gmail, then market? If your only problem is a missing keyboard, that can easily be remedied. Get the apk of a keyboard that's known to be working (there's a thread in the NC section on the DroidX kb), and push it via adb as system/app/LatinIME.apk. Reboot, and you should have a keyboard.
You said you can't do the 8 failed boot attempts... Why not? All you have to do is power-down 8 times during boot (hold down power for about 10 seconds, then hold down again to power on... Repeat 8x).
Hey,
I'm kind of in the same position that you were originally in. My NC's firmware is 1.0.0. I used the guide on nookdevs.com, flashed my SD card w/ the proper image, inserted the card, plugged in the USB, and... over 30 mins and nothing.
What did you do once you were in this step to continue? Did you remove the SD card?
-Taser
edit:
wvcachi, that's actually exactly what I ended up doing, and it came right up - thank you!
Also, I ended up doing this (sorry, no linking allowed - nookdevs.com/Installing_the_1.0.1_update_on_a_rooted_NC), re-rooted, and the 1.0.1 root actualy did auto-reboot.
Thanks eveyone for your help, and OP for not getting too ticked I hijacked their thread
Taser420 said:
Hey,
I'm kind of in the same position that you were originally in. My NC's firmware is 1.0.0. I used the guide on nookdevs.com, flashed my SD card w/ the proper image, inserted the card, plugged in the USB, and... over 30 mins and nothing.
What did you do once you were in this step to continue? Did you remove the SD card?
-Taser
Click to expand...
Click to collapse
Ya same issue here, except now my nook is stuck at the giant n. It was responding to my adb shell commands to to the 8x reboot for the BootCnt. But after it did the update it still sits on the giant n. I'm not sure what is screwed up on mine. I wonder if the auto-nooter just messed up some how...
I was upgrading from 1.0.0 to 1.0.1 to fix my wifi drop issues.
Edit: Just let the n sit there for a good 15 minutes. I've never been so happy to see that intro video with that girl showing you how to use the nook!
Will try to auto noot again...
I've done auto-noot several times now, and it's never rebooted on its own. After a couple minutes of it doing its thing, I just unplugged it, held down power for 10 seconds to power off (it's on even though it doesn't look like it), removed the SD, then powered on. Everything was as expected after that, it just never rebooted on its own.
Mine from 1.0.1 behaves exactly like the wiki described for me. Ran with the screen off for about 45s and then rebooted and was good to go. I followed the post instructions to set up the account and everything went exactly as they described. Only difference was it seemed to me like the instructions duplicated themselves at one point, steps in had already done were listed.
Works great, but might should revise the steps of there are duplicate ones. If I remember or root again I might do it. Adding renaming the phone apps woukdvbe a good thing to do too.
The version of Auto-nooter for 1.0.0 doesn't auto-reboot after it's done. You'll have to let it sit and reboot yourself.
I strongly recommend you upgrade to 1.0.1 before you root anyway. It's more stable, and when you eventually upgrade, you'll have to wipe your nook to do it. Better to do it while you don't have anything on it.
Thanks to everyone that helped out. I have everything up and working!
Yesterday I used autonooter 3.0.0 to try to root my NC 1.1.0. It would not boot up or turn on at all. Today when I go home from work, I plugged it into my PC and was told battery was too low to boot. I charged it to 100%, then it booted up. I checked, and to my surprise I was still on version 1.1.0. So, it was not bricked.
Today I tried autonooter 3.0.0....same result. My NC won't turn on...and when I plug it into my PC. I get a "RNDIS\Ethernet Gadget" found message, then the "Found New Hardware Wizard" opens up.
Is my sd card flaky, is the card not properly seated in the NC, or is the NC card slot bad? I tried booting a CWR card to restore my NC, but get the same messages.
I plan to wait till tomorrow and hope the battery drains, so that after a re-charge I will be back in 1.1.0. Then, I plan to take it back to B&N for an exchange...unless someone knows what my problem really is.
Autonooter does its thing with the screen off. It sounds like one of your boots was Autonooter working, because it was installing drivers for ADB. Plugging it in, w/ Autonooter in SD is what starts it. Maybe you just keep booting from the SD card, and only by plugging it into the computer was it able to do what it was supposed to.
You may be right, but right now the NC won't turn on.
Any idea if a HARD Reset will solve that?
I followed the instructions to a T. I even downloaded a new Autonooter 3 file. After writing to the card, I was able to view it and saw the 4 files and file sizes...very similar to those show in the instructions. I inserted the card in the NC, plugged it into the PC, .......black screen. I waited 30 minutes, but it never booted. I disconnected and removed the sd card. The NC would not turn on..........again. Failure # 3.
With the card out, I plugged it in to the PC again, and to my surprise, it turned on. It was still at v 1.1.0.
I transferred some mp3's, and all is good. I'm at a loss to know what to do next. I feel sure there is a problem with the sd card or the sd card slot. Since I am within 14 days of purchase, I think I will take it back to B&N, and try to exchange it for another new one.
Not sure how Autoneooter 3 is but the original 12.25 works great every one I did. Just go 1.0.1 full restore and then do the original autonooter and then the 1.1.0b through CW ZIP.
Most of what you posted didn't sound like anything was really wrong at all.
I do think wonky cards do mess it up though. try it for a while with a different card or no card to find out. You can also take your card and do a full format.
As we know, the Nook Color's SD slot will always take first boot priority. I'm in a situation where even booting via SD through known methods are not working.
The purpose of this thread is to:
1) Share with others who are in this similar situation, on methods which may result in the recovery of their own devices
2) Keep this discussion healthy so one day, I will be able to restore my own bricked device which I'm still striving hard to.
Click to expand...
Click to collapse
IMPORTANT: If you have a bricked device I need to emphasize on searching and reading very carefully what others have shared here in both General and in Development. This is a fundamental requirement, as with the ability to follow instructions and not panic by creating unnecessary threads. This will only make things harder to find, so thank you in advance for not doing that.
There are many useful guides out there, some of which the most helpful are:
Nook Color Restore to stock by samuelhalff
Dummies Guide to Fixing 'My Nook Won't Boot' by RileyGrant
Stock 1.1.0 Clockwork Recovery Image by brianf21
Nook 1.01 stock dd images by shad0wf0x
[RECOVERY] Monster RootPack 0.7 / Clockwork Recovery 3.0.0.5 SD by thecubed
Click to expand...
Click to collapse
Anyway, in severe bricking cases where hardware is not at fault, many of the solutions to restore the NC begins with either:
1) Booting to CWR-SD via uSD
2) Booting to a rom i.e. Nookie Froyo via uSD
3) Having ADB access, if available
Till date I am not sure why the SD-loaded programs do not work for me, and here are the symptoms:
1) Without SD inserted, the standard BN splash appears, 'Welcome to the Future of Reading', then gets stuck there till powered down. Needless to say, the 8-times reset method doesn't work.
2) With SD inserted, the 'LOADING' screen will splash, then screen blacks out with device still powered on . You will know that the device is still running as you need to hold power down for around 20 secs before you're able to power it back up again. I call this the 'Black Screen of Death'.
Click to expand...
Click to collapse
To get your device up and running, try the following:
0) Do not panic. As long there's no hardware failure there will always be a solution. Look at me, thing's still a damn brick and yet here I am, still hopeful
1) Perform a search, read the useful threads created by the above members first. This thread is related only to failed SD-booting.
Once you've done that, prepare your recovery options with these in mind. The elimination process is part and parcel of problem-solving. In no particular order:
2) Sometimes, try powering on your device by connecting the USB cable from your PC or A/C source, instead of using the Power button.
3) Use only the original USB cable that came with your device.
4) Use the back USB ports of your PC, instead of the fronts as they may provide more consistent power and connection to your device. Try to avoid using USB hubs as they may not distribute the required power equally/properly.
5) Try switching to different USB ports, some may be hardware-gimped due to wear-and-tear.
6) Try to attempt the recovery on another Win, Mac or Linux computer. At least eliminate further possibilities of environmental hardware error.
7) Try charging the battery full.
8) Or, try discharging the battery completely, by leaving the device in BSOD state overnight until you get a message saying your device can't boot due to insufficient power when switched on. Once you are in this state, keep booting the device up until the screen does not appear. Then, recharge it back to full to see if the OS returns to stock (I am sceptical of this, but this was what others advised).
9) Try different SD cards. The device could be picky. Variety should be by class-type, brand, SDHC or non-SDHC. It's been discussed that faster cards perform better, as with more reknowned brands. Also, 16GB cards reportedly do not run Froyo (do read more by searching).
10) When loading anything via SD (CWR, roms), try different button combinations i.e. power + n + up, power + n, etc.
11) And/or, hold power for various timed-presses i.e. >30 / 45 / 60 seconds. Some members report CWR booting up after these periods, or even longer.
Note: funnily I tried holding power + n + up for > 60 seconds and the 'LOADING' screen just stays frozen. Still doesn't work, and I didn't get any ADB access.
12) Try formatting the card completely with native Win/Linux tools, EASEUS Partition Master or SDFormatter before each burn.
13) Try using both Win32DiskImager and WinImage, or dd-ing in Linux (search for more instructions). If you have Linux, you can check to see if the SD's /boot partition is indeed bootable or not.
14) For ADB access, try to unregister your hardware (go to Start > Run > devmgmt.msc), then unplug-replug device to have your PC detect it again. If a device with VID of 2080 shows up, that's the NC. You should know what this means, by now. If not, read more here.
15) Try different SD card readers, especially when experiencing failure on multiple computers. As opposed to multi-adapters i.e. 6-in-1s, try dedicated microSD readers like this one. Do not use those microSD-to-normalSD converters (usually packed together in the same shipping plastic as your card) just because you only have a reader that reads regular SD cards, they tend to fail a lot.
16) At your own risk, try cleaning the contact points on your SD cards (if you must, use cleaning alcohol and a cottom swap/q-tip - do not use water), to free them of dirt and invisible grime. If you have multiple SDs, try cleaning the least expensive ones first. Don't forget to leave them to dry completely before insertion into the NC. Credit to bonobomidwest, read his experience here.
Click to expand...
Click to collapse
17) Use Nooter 0.2 (recommendation from thecubed):
Here's my recommendation: use the stock charger cable (the one with the light-up N in it) when you try Nooter 0.2.
If the light goes from orange to green (or something like that) that means Nooter is booted and working.
My new thought: some file in /rom is missing, which controls the backlight and lcd controller. I can't prove this, but it seems logical haha.
All you need to do is get Nooter 0.2 booted and ssh'd in and you'll be able to dd over a complete 1.0.1 backup.
rawfish: I use Ubuntu, so sorry if I'm not able to provide instructions for Windows
Type:
Code:
sudo ifconfig usb0 192.168.2.1
Then:
Code:
ssh [email protected]
And you should be able to follow the directions for restoring on the wiki... either that or check around on IRC, if you tell them that you've got ssh access and you just need to restore your device, they'll help you out if I'm not around..
rawfish: I typed 'dmesg' in shell to see if the NC connected as a usb-ethernet device, and it doesn't show. If it does for you, then you should have progress and should ask around in IRC.
Click to expand...
Click to collapse
All these did not work for me, but hope this is useful to some. I've read testimonies from everyone that this is an unbrickable device, and I certainly hope it's true, and for a kind soul to help suggest more solutions. As I'm overseas, do you think I should call BN up to see if I can arrange to send my device back for fixing/replacement? It's been a month since purchase, and 3 weeks of failed restore attempts.
Disclaimer: I am not responsible if any of these methods get you in deeper trouble. Attempt at your own risk. Credit goes to thecube aka IOMonster, and the #nookcolor channel on irc.freenode.net. Thank you to everyone who created the recovery guides too.
This space reserved.
You sure you just don't have crap or badly burned SD cards? Sounds pretty much what happens if you boot s really slow/junk SD or burn it badly.
khaytsus said:
You sure you just don't have crap or badly burned SD cards? Sounds pretty much what happens if you boot s really slow/junk SD or burn it badly.
Click to expand...
Click to collapse
I tried on 6 different SD cards:
1. Transcend 8GB Class 6
2. Transcend 4GB Class 2
3. Wintec 16GB Class 10
4. Sandisk 4GB Class 4
5. Sandisk 2GB non-SDHC
6. Sandisk 256MB
I've burned stuffs like Autonooter and Honeycomb on these before, and they worked fine.
rawfish said:
I tried on 6 different SD cards:
1. Transcend 8GB Class 6
2. Transcend 4GB Class 2
3. Wintec 16GB Class 10
4. Sandisk 4GB Class 4
5. Sandisk 2GB non-SDHC
6. Sandisk 256MB
I've burned stuffs like Autonooter and Honeycomb on these before, and they worked fine.
Click to expand...
Click to collapse
First of all - great job in pulling all the resources into one place (it's small consolation, but i think you've just helped a whole load of people )
Second, i apologise if I'm telling you stuff that's obvious, but in helping out on these forums often it's the LOGIC of troubleshooting rather than the particulars of the problem that are important... In other words, only vary one thing at a time, and ALWAYS swap out every piece of hardware involved at each stage... if you always rely on one piece of hardware this might be the weak link... so have you tried a different SD drive or adapter? and have you tried burning from a different computer?
Now, I'm not being insulting, because I had a virtually identical problem with my first froyo - it just wouldn't boot (as you describe) despite multiple burns, different cards, all of the standard formatting tricks etc. It wouldn't work in multiple computers - the common element being the SD/microSD adapter. It never occurred to me that such an electrically simple part could be at fault, but you bet it was - in fact i would say in my experience these things consistently fail! (I spent a day kickign myself, because we know ho unreliable they are from using them in other devices). They also all look alike so it's hard to keep track of which one you are dealing with They also fail unexpectedly, so if you used an adapter before there's no guarantee it's working now...
Sooo... Have you tried a dedicated microSD reader (rather than a simple adapter)? I now carry one with me everywhere (it doubles as the world's smallest thumb drive too)
http://www.amazon.com/gp/product/B002HGFKR8
Also bear in mind that froyo appears not to work on 16gb cards (i see you tried one)
Also, from my experience with other devices these cards are very sensitive to dirt and oil on the contacts. Certainly with enough frustrated handling you can get enough finger-grease on them to have them fail. Also they seem to be much less tolerant when writing than reading. I have NO idea how you would go about cleaning out the slot in the NC (and as someone who has ruined at least one DVD drive by blowing canned air where you shouldn't I'm not going to advocate for that). I have resurrected 'dead' SD cards before by cleaning the contacts with rubbing alcohol and a q-tip (on the card's contacts) - but again do so with great care (at your own risk!!!) and with your cheapest card, and make sure it si completely dry before you put it in the NC.
I have been generally a little scared that all this plugging and unplugging of the microSD might hurt the NC, so i have done everything i can to avoid that...
I am sure you can find someone local to you willing to help fix your boot issue but I assure you, its damn near impossible to brick a nook without physical damage.
@bonobomidwest:
No offence taken at all, in fact I am very appreciative of your contribution. I forgot to add the fact that I tried on 2 different card readers, plus indeed tried to clean the slot via an air duster VERY GENTLY as a last effort resort (I would not recommend this, it may cause permanent hardware damage). Once I'm free I'll go get a new SD reader (reads uSD only) and a new uSD which I haven't tried before. I'll try cleaning the contact points too.
*Thanks - I've added more checklists to the OP
@combustiblemonkey:
Thanks for the assurance.
I convinced my friend to buy a nook, rooted it for him, and was bricked within 2 days. Here is how I fixed it
EDIT: I tried to post a link, but was unable. If you go to theunlockr(dot)com and search for how to restore nook color to stock, there is a detailed article.
This took me almost 2 days of reboots, black screens, and freezing. I would get into CWR, and it would freeze. Had to reboot, got the black screen of death. Literally, a couple hundred reboots before it said that the OS has successfully installed, and of course, it froze again. Many more reboots, and it was finally at stock. I figure getting it back to stock was enough to return it.
Dr-Rockso said:
I convinced my friend to buy a nook, rooted it for him, and was bricked within 2 days. Here is how I fixed it
EDIT: I tried to post a link, but was unable. If you go to theunlockr(dot)com and search for how to restore nook color to stock, there is a detailed article.
This took me almost 2 days of reboots, black screens, and freezing. I would get into CWR, and it would freeze. Had to reboot, got the black screen of death. Literally, a couple hundred reboots before it said that the OS has successfully installed, and of course, it froze again. Many more reboots, and it was finally at stock. I figure getting it back to stock was enough to return it.
Click to expand...
Click to collapse
Thanks, this is the direct link:
http://theunlockr.com/2011/02/14/how-to-restore-the-nook-color-to-stock
All instructions were taken from XDA, plus no guarantee it's the most updated
Moving on, great to hear you've gotten it back to stock. Man, you've got GREAT patience, a couple hundred reboots?
1) Was the SD inserted in or not? Curious about the OS successfully installed message, which is the result of 8x unsuccessful reboots without SD inserted.
2) Could you also provide a more detailed account on what you did? Looking forward to hear - thanks.
Hi rawfish
I also have this issue and have been trying many things. My nook did boot nooter 0.2 (the light went green) but I couldn't get Win 7 or Ubuntu to connect to it. My screen never changes at all, no backlight even. Seems this may be a larger issue than most believe it to be, especially for people like us who don't live in the US.
chrysilis said:
Hi rawfish
I also have this issue and have been trying many things. My nook did boot nooter 0.2 (the light went green) but I couldn't get Win 7 or Ubuntu to connect to it. My screen never changes at all, no backlight even. Seems this may be a larger issue than most believe it to be, especially for people like us who don't live in the US.
Click to expand...
Click to collapse
If you can find a friend or person in your area having the same device, you can try to see if an SD you burned work on theirs. If it works on theirs, it's possible that your SD slot is defective - but then comes the question of it being in working condition before the bricking happened, right?
I still think mine's recoverable, as with yours. Could be a bad SD or reader, or bad contacts. I'm going to try out using another reader plus purchase an el-cheapo branded SD. I'm also going to try formatting it via another PC in a linux environment and messing around with the partitions.
I understand the trouble you may have taken to get the device - and this happens. All the best mate, and do cheer up, don't give up.
rawfish said:
Thanks, this is the direct link:
All instructions were taken from XDA, plus no guarantee it's the most updated
Moving on, great to hear you've gotten it back to stock. Man, you've got GREAT patience, a couple hundred reboots?
1) Was the SD inserted in or not? Curious about the OS successfully installed message, which is the result of 8x unsuccessful reboots without SD inserted.
2) Could you also provide a more detailed account on what you did? Looking forward to hear - thanks.
Click to expand...
Click to collapse
When I finally got it to work, the SD card was installed with the 1.0.1 stock OS on it, and CWR. The problem was that that (+) and (-) would only occasionally work. And if they did, it would usually freeze. I would be able to format system, but it would freeze if I tried to format data. Powered off, and I would get the black screen of death (BSoD). Once this happened, I would plug it into my computer so that I could hear the chime indicating a new device was plugged in. I found that ejecting the SD and then rebooting would sometimes help get rid of the BSoD. Then another power down, plug in the SD, and start again. Also, holding the N, +, and Power would sometimes help in launching CWR. I would usually have to hold for 60 seconds, but it would finally launch. It seemed like the nook was trying to run a process that slowing it down and causing it to freeze, but I couldn't figure out what it was. If I would wait an hour, it would boot CWR and allow me to format system and data, but then it would freeze when I would try to install the zip.
The successful install message was in CWR. It said Install From SD Card Complete, or something like that. After that, I still had to do the 8 reboots. It would load up the stock welcome screen and freeze. 8 reboots later, I got the video lady. Good enough to return it to the store.
It really was just persistence. It would usually take an hour of reboots before I was able to try to install the zip, and it probably failed on me 15+ times. The status bar would get half way, and freeze. Then I had to begin again. If it had been my nook instead of my friends, I probably would have given up. I wish I could be more specific, but unfortunately I am new to all of this. My nook rooted just fine, and fixing his is really my only experience with CWR. I just kept going until it worked.
Good luck! It is a pain in the ass, but it can happen.
rawfish said:
If you can find a friend or person in your area having the same device, you can try to see if an SD you burned work on theirs. If it works on theirs, it's possible that your SD slot is defective - but then comes the question of it being in working condition before the bricking happened, right?
I still think mine's recoverable, as with yours. Could be a bad SD or reader, or bad contacts. I'm going to try out using another reader plus purchase an el-cheapo branded SD. I'm also going to try formatting it via another PC in a linux environment and messing around with the partitions.
I understand the trouble you may have taken to get the device - and this happens. All the best mate, and do cheer up, don't give up.
Click to expand...
Click to collapse
My wife has one as well so am able to test using that and the SD works fine in hers. The whole screen not turning on thing is weird though, does your screen turn on?
We bought them when on honeymoon in America so didn't have to pay a shipper or anything
Deleting the partitions manually with Gparted and using dd to burn the SDs and making sure the correct partitions are bootable doesn't seem to work. Last night I retried a lot of the previously attempted options, with no results.
It's weird to think that a working SD slot and a slew of cards will suddenly malfunction, but for now that seems like the most plausible reason why my NC can't boot anything off SD.
To think back how it all started, the device suddenly rebooted from HC preview v0.4 to stock BN 1.01 (rooted + installed CWR on eMMC) while the SD is inserted, then upon another reboot it simply stays dead, this gives me reason to believe that the internal boot partition is corrupted, and SD slot nuked hardware-wise.
Hmmm, really hoping to find someone else who has the same device, in my area.
Right now I am at the Black Screen of Death as well...
I think Barnes should refund me, but I am willing to do some tests for the good of society.
Steelfan555 said:
Right now I am at the Black Screen of Death as well...
I think Barnes should refund me, but I am willing to do some tests for the good of society.
Click to expand...
Click to collapse
Sorry to hear that, and don't give up! Hope you took a look at the other threads, and this little pseudo checklist I made in the OP. Do share the outcome
Thank you Rawfish. The first option, the Dummies Guide to Fixing 'My Nook won't boot'
was what I needed to get started on the right track again. Though I'm not sure anyone wants to know how I ended up here, I'm grateful to those that put in the time and effort to find any of these solutions.
Thank you!
FroztIkon said:
Thank you Rawfish. The first option, the Dummies Guide to Fixing 'My Nook won't boot'
was what I needed to get started on the right track again. Though I'm not sure anyone wants to know how I ended up here, I'm grateful to those that put in the time and effort to find any of these solutions.
Thank you!
Click to expand...
Click to collapse
Update:
Ok, so after running through it, I ended up getting stuck on the boot screen that shows N. If I powered off, it would restart and get stuck at that screen. I tried the 8 shutdowns (it installed new software), but afterwards, it was still stuck. So, I tried another method I found on the forums. I powered off holding the N button and power, which caused it to boot back up and do a factory reset. I now have a factory fresh Nook.
Okay, it's been a while since I kept this thread updated - I contacted BN and had the device sent back, apparently the SD slot failed so they sent me a new one. I'm just wondering if it's sheer concidence that it happened, as I was tinkering with Nookie Honey preview v0.4, when the hardware suddenly failed.
Oh well, I guess the NC still remains as a 99.99% unbrickable device - with the 0.01% being related to the ambiguous root cause to my case.
I now have 2 NCs (one from the RMA process, another one from the $199 eBay deal.