My phone problem was it ran out of storage after taking some pictures, so I thought I can solve it by flashing my phone, but after successful flash it only vibrates and hangs at HTC green logo forever.
First I tried:
RUU_Schubert_hTC_Asia_WWE_1.57.707.02_Radio_5.52.09.16_22.33a.50.10_Signed_SCHUBERT_RELEASE
Then I tried
RUU_Schubert_hTC_Asia_WWE_1.23.707.01_Radio_5.51.09.06a_22.30.50.09_Signed_SCHUBERT_RELEASE
And
RUU_Schubert_HTC_Europe_1.16.401.01_Radio_5.51.09.06a_22.30.50.09_Signed_SCHUBERT_RELEASE
Can anybody help me out? Thank you in advance
Here is the only info which I have for my phone before flashing:
Phone Information
Model: HTC HD7 T9292
Software: Windows ® Phone 7
Total Storage: 10.40 MB
OS version: 7.0.7004.0
Firmware revision number: 2250.09.12302.707
Hardware revision number: 0002
Radio software version: 5.51.09.06a_22.30.50.09U
Radio hardware version: A.102.0.D4
Bootloader version: 1.23.2250.0(112138)
Chip SOC version: 2.2.5.0
PD29100 SS-BC (4K)
SPL-1.23.2250.0(112138)
MicroP(LED) 0x07
TOUCH S1 (v1.7,#1624)
SD SANDISK 15193MB Class0
Partition Info-v211v413
Something seems wrong with the total storage reported. It should show 14.63GB. Looks like your sdcard is acting up. Try hard resetting the phone first by
1. Turn the phone off. If it’s frozen or unresponsive, pull then replace the battery.
2. Press and hold the Volume Up and Volume Down buttons and power the phone back on.
3. Continue to hold Volume Up and Volume Down until a factory reset screen appears.
If this doesn't work, there might be a problem with the sdcard :?
Thank you very much rhn my problem was solved by disassembling my phone and formatting my SD using PC
Hi,
I'm having the same problem as you.
when you formatted the SD card, what format did you format it to?
Uninstall the SD card by disassembling your phone
Now the phone could fully start up without storage,
Use a card reader to format the SD card through PC, and install it back again, and after that do a hard reset to your phone by
1. Turn the phone off. Pull the battery and put it back again
2. Press and hold the Volume Up and Volume Down buttons and power the phone back on, (continue to hold Volume Up and Volume Down until a factory reset screen appears)
3. Now press Volume Down
Did you void the warranty after doing this? I'm having the same problem and i'm fearing opening it would void my warranty...is there any other way to do this without opening it up?
Check out HTC HD7 - Disassembly & Removal Of microSDHC Without Voiding Warranty at youtube
did you need to reflash again. Its surprising that all of the problems arose after the Nodo update?
Ihssan said:
Uninstall the SD card by disassembling your phone
Now the phone could fully start up without storage,
Use a card reader to format the SD card through PC, and install it back again, and after that do a hard reset to your phone by
1. Turn the phone off. Pull the battery and put it back again
2. Press and hold the Volume Up and Volume Down buttons and power the phone back on, (continue to hold Volume Up and Volume Down until a factory reset screen appears)
3. Now press Volume Down
Click to expand...
Click to collapse
Please tell me how to format the SD card. Should I use Fat or Fat32 ? and the allocation unit for Fat format please ?
Thank you very much in advance.
Phone stuck on HTC logo
rhn said:
Something seems wrong with the total storage reported. It should show 14.63GB. Looks like your sdcard is acting up. Try hard resetting the phone first by
1. Turn the phone off. If it’s frozen or unresponsive, pull then replace the battery.
2. Press and hold the Volume Up and Volume Down buttons and power the phone back on.
3. Continue to hold Volume Up and Volume Down until a factory reset screen appears.
If this doesn't work, there might be a problem with the sdcard :?
Click to expand...
Click to collapse
THANK YOU!!
thank you very good
hi this method did not worked for me any alternative?
asadnow2k said:
hi this method did not worked for me any alternative?
Click to expand...
Click to collapse
have you tried Y-cable method?
I did take out the sd card but the phone did not pass the logo screen without sd
Related
Please,help me as soon as possible -about get out a boot mode.
Situation-i was trying to flash one of Radios from that tread (as always),my Xperia is Hard-Spl,i was renamed downloaded file to Kovsimg.nbh, copy that to the root of MicroSD card,then turn Xperia in bootload mode (4 color bars) (you know-vol. button and on simultan),the file was recognized,i got the message (as always) "press power button to flash ROM or action button to cancel",i pressed power button, flashing begann and was already on 100%, but then was coming an Error message-"Flash not complete and some about RSA too".I take akku out and put in again,and now-don't matte how i turn Xperia ON,it always go to Bootload mode and want to flash that file (and it will not flashed).How i can get out now of that bootload mode???????I read "press Action button to cancel flashing",but what is that Action Button???And if i even take out MicroSD,Xperia start always in bootload and want to flash something!!!!I sit down in Hotel now,i don't have a MicroSD cardreader to copy on MicroSD another file,and i can't use my telephone,because it start always in that 4 color bootload mode and want to flash something!!!
Ple-e-e-a-a-se Help!!!! I don't want to hard reset my telephone now,i just want to start Xperia in normal mode.
Many many thanks in advance,
Valery
P.S.Sorry for my English-it's not good and now especially i'm totally nervous with that problem...
Action button is the middle of the optical joypad.
to reflash connect from your computer with a USB cable and use the Custom Radio RUU
AND DO NOT GO AROUND FLASHING THINGS UNLESS YOU KNOW WHAT YOU ARE DOING!
Thanks a lot for fast response!!!
I was flashing one of the Radio ROMs here in the thread,that was in the list as worked, maybe it was transfer failure to MicroSD card,now it don't matter.
I power now Xperia on, then see that 4-color screen,then now i see kovsimg.nbh- RADIO and "Press power button to start update image" and "Press action button to cancel update image". If i press the middle of optical joystick-as you said-then it happens nothing-i see the same screen...What schould i do????
This is the "n" time I write this:
Remove and reinsert battery
Turn phone on
Now you are out of bootloader
Thank you Gtrab for answer,
but it is what i mean and what is strange-i remove battery,reinsert it,push only On button,and i'm again in boot mode....Very strange,yes???
ValVK said:
Thank you Gtrab for answer,
but it is what i mean and what is strange-i remove battery,reinsert it,push only On button,and i'm again in boot mode....Very strange,yes???
Click to expand...
Click to collapse
Strange for you, but well known phenomena: your flash didn't complete
You'll have to flash again from a PC or by copying a new radio file to your microSD card, or you can use "mtty"... sorry there's no other way but reaching a PC
I have notebook here,but i can't connect to my phone,because it start always in boot mode.Is here some method to connect to phone without Active synch in that bootloader mode???I understand now-i must copy right file on my MicroSD card,how i can do it wothout MicroSD Cardreader and only with a phone starting in boot mode???
Thank you,
Valery
ValVK said:
Is here some method to connect to phone without Active synch in that bootloader mode???I understand now-i must copy right file on my MicroSD card,how i can do it wothout MicroSD Cardreader and only with a phone starting in boot mode???
Click to expand...
Click to collapse
you can't access the sd-card without a Cardreader but you dont have to. In the 4-color screen you should see the text "USB" when you connect the phone to the pc (as far as I remember, when the device is not connected to the pc instad of "USB" the text is "SERIAL"). In that mode you can use the RUU to update your device.
Mastermarv,
thank you very much!!!I was worked for me-i was using RUU Radio utilities in bootloader mode and flashed orig. Radio ROM-now it all started OK and all work again!!!!!Uf-f-f,so one "abenteuer"...
Thank you all the people,those tried to help me in this situation,much appreciated your help!!!!
Now i can some relax...
Valery
ValVK said:
Please,help me as soon as possible -about get out a boot mode.
Situation-i was trying to flash one of Radios from that tread (as always),my Xperia is Hard-Spl,i was renamed downloaded file to Kovsimg.nbh, copy that to the root of MicroSD card,then turn Xperia in bootload mode (4 color bars) (you know-vol. button and on simultan),the file was recognized,i got the message (as always) "press power button to flash ROM or action button to cancel",i pressed power button, flashing begann and was already on 100%, but then was coming an Error message-"Flash not complete and some about RSA too".I take akku out and put in again,and now-don't matte how i turn Xperia ON,it always go to Bootload mode and want to flash that file (and it will not flashed).How i can get out now of that bootload mode???????I read "press Action button to cancel flashing",but what is that Action Button???And if i even take out MicroSD,Xperia start always in bootload and want to flash something!!!!I sit down in Hotel now,i don't have a MicroSD cardreader to copy on MicroSD another file,and i can't use my telephone,because it start always in that 4 color bootload mode and want to flash something!!!
Ple-e-e-a-a-se Help!!!! I don't want to hard reset my telephone now,i just want to start Xperia in normal mode.
Many many thanks in advance,
Valery
P.S.Sorry for my English-it's not good and now especially i'm totally nervous with that problem...
Click to expand...
Click to collapse
I have the same problem! i can't even connect it to my pc cuz it doesn't recognize the phone... it's been stuck at the white " KOVSIMG.nbh - OS - Update in progress...." screen for more than 10 mins now. but it's 100%. I tried hard & soft reset, taking out the battery, and powering it on again , but it still goes back to this screen. please help me... thanks in advance
my situation, i downloaded a rom and tried to flash using SD method.
i think it may have been a corrupt rom because everytime i turn it on it asks me to press power button to flash rom.
is there a way i can access the sd card from the phone in this state?
or another way i can flash it from my computer?
i dont have a seprate micro sd reader.
all i have is my compter, the xperia and the usb cable =S
someone help??
:*(
How do you turn on your phone? And what rom did you use. More information please. And did you hardspl?
i turn on my phone with the power button on the top.
i used kid dc's extravagent rom 4.1.
hope this helps?
my dilemma is now accessing the sd card
and yes i have hard spl on there
i've flashed plenty of times before, this time i think it was just a bad rom.
Hello!
http://forum.xda-developers.com/showthread.php?t=446070
This should be help.
greetz
With the phone off, try to do a hardreset: Hold down the two silver buttons directly under the screen, while holding them down push the power button, you should then be presented with a screen that asks you to press "R" to reset your device....so go ahead and flip open the keyboard and press "R", when it completes it will ask you to press "Spacebar" to restart the device.
seraphlam said:
i turn on my phone with the power button on the top.
i used kid dc's extravagent rom 4.1.
hope this helps?
my dilemma is now accessing the sd card
Click to expand...
Click to collapse
press the power to flash again and see what happens......
u din mention but if it directly goes into tri-color skin then try this>>>http://forum.xda-developers.com/showpost.php?p=2917367&postcount=89
i've tried pressing the power button again.
after hard spl finishes installing the rom i'ld take out battery to turn it off and when i turn it on again it just asks to flash again.
and i've tried a hard reset.
what is mtty ?? sounds promising !!
thanks for the help guys, i think i mite just have to visit my friend with micro sd reader >_<
but that wont be until tomorrow !!
noOoO
Hello!
With mtty you can reset some Values to access again the flash rom and reinstall your os. I had the same Problem, that the tri-color display shows after reset. mtty had me help!!!
Greetz
i would try to take out the sd card from the x1, then boot and again take it inside the x1. then with file explorer you have acess to the card
I couldnt find a good title for this thread coz i donno how to explain it!
See the bellow video, first i cannot get to the bootloader screen. Then when the phone is on, after i press the power button the dial pad screen first, and the calendar screen after that will come up.
http://www.youtube.com/watch?v=5W1CJV0m3Ac
How could I fix this? i cannot even get back to original situation to get for warranty!
I think it's the source of my problem.
PS. i face this problem after i removed S2U (Slide to unlock) software
Can you get to the restore screen? (hold down the two front silver hard keys + Power)
With the phone completely off, You have to hold down the power + volume down button until the bootloader pops up...keep holding it until you see the colored strips.
Try Using the camera button i.s.o the volume down. Works fine for me on my X1
Try this, Connect your phone to the pc, make sure you are connected to the activesync. Then run the the hard spl tool, It should automatically put the phone into bootloader mode.
Thanks for replies,
yes i can get to the bootloader screen using hard spl manual tool, but it will stop on "Loading..." screen and it's not flashing!!!
isp_85 said:
Thanks for replies,
yes i can get to the bootloader screen using hard spl manual tool, but it will stop on "Loading..." screen and it's not flashing!!!
Click to expand...
Click to collapse
When it says "Loading..." it means it cannot find KOVSimg.nbh on your SDcard or there is nog USB connecting through which you're trying to update.
i don no but did u check if ur volume key is working...also do a hardrest....stteing>system>clear storage
When it says "Loading..." it means it cannot find KOVSimg.nbh on your SDcard or there is nog USB connecting through which you're trying to update.
Click to expand...
Click to collapse
No! the image is in the sd fat32 card. When there is no image in that it will say image not found!
i don no but did u check if ur volume key is working...also do a hardrest....stteing>system>clear storage
Click to expand...
Click to collapse
Yes, my volume key is working fine in windows with no problem!
Actually i've already did a clear storage but.... nothing....
Well I had the same problem when trying to flash from a Vista PC and USD cable. (for the hard SPL, glashing with a SD card worked fine, but you should disconnec the USB cable to be sure that it takes the SD card)
I used my wifes small netbook with XP and there it worked instantly. If you use a Vista machine, try it with an other XP machine.
Regards,
Mark
isp_85 said:
No! the image is in the sd fat32 card. When there is no image in that it will say image not found!
Yes, my volume key is working fine in windows with no problem!
Actually i've already did a clear storage but.... nothing....
Click to expand...
Click to collapse
Try other ROM, if it was stock Rom so try other cooed ROM, or vice versa
ok try this. Restore your phone to stock spl, Let the hard spl tool put your phone into bootloader mode. Once its in this mode, Try to run Sony ericsson update tool to update it to the R3A firmware.
Hardspl is completley not working!!!
Is there a dead mode method? i think that would help me?
Hi all,
so i did a bad flash and my diamond doesnt boot into windows, not a problem with the Unlocker Right? turn off and turn on holding power+down volume key+ center key and back key, it boots into bootloader but it just sits there saying LOADING... and this is because the internal memory wasnt being recognize by windows before the bad flash.
do i have any other alternative??
Hi, fear not my friend. Just boot into bootloader mode by pressing power key and volume down at the same time (If you press the center button also you will trigger a hard reset.) Then plug your phone on your PC. On the bottom of the phone screen you should see that the word serial changes for USB. Then just lauch any rom upgrade(either a stock rom or a custom one). The rom upgrade utility will the upgrade your phone like it normaly does when it's not bricked. It will just be a little longer.
you have hold the power volume down and press soft reset to enter boot loader
Hi
I have the same problem, I flashed my diamond with a bad flash, now it turns over, I try a hard reset, it works not so.
when I plug in the charger, the LED does not light.
what should I do, help me pls!
Here is the link where I downloaded the flash: ftp://ppcgeeks.com/Diamond/Users/Tobeychris/Tutorial/Diamond Unlocker.rar
Hello, I have a very strange problem on my optimus black, I'm using the zeus v7.04, when I press the button to lock and unlock screen me a menu, where you have the options,
Silent Mode,
Airplane Mode,
restart,
Recovery,
Power Off.
When I click the Power Off, the phone does not shut down, just restarts, already formatted the sd card, changed rom, formated the phone, changed my recovery, I took the sd card phone, sim card, but nothing works, anyone out there have any solution to my problem.
Thank you in advance.
I had a similar problem with that button but it seems to me that it is a hardware and not a software problem...
Good luck
davifs2012 said:
Hello, I have a very strange problem on my optimus black, I'm using the zeus v7.04, when I press the button to lock and unlock screen me a menu, where you have the options,
Silent Mode,
Airplane Mode,
restart,
Recovery,
Power Off.
When I click the Power Off, the phone does not shut down, just restarts, already formatted the sd card, changed rom, formated the phone, changed my recovery, I took the sd card phone, sim card, but nothing works, anyone out there have any solution to my problem.
Thank you in advance.
Click to expand...
Click to collapse