I've seen these simple USB GPS receiver antennas that hook to a laptop for GPS duties so naturally I'm thinking why can't this be done for the nook. Ideally we would have a dual/split port so power could still be supplied at the same time.
I'd rather have this config since I don't like the idea of tethering to a GPS capable cell for privacy reasons and it ties up the cell too.
Why couldn't this be possible? Is it just a matter of the Nook recognizing the GPS antenna and being able to get a software package to recognize it?
Any ideas?
With CM7, and a bluetooth GPS reciever, this is no problem. We will never be able to build a GPS into the device, but we can get close enough...
Yes, my intention would be to leave the GPS antenna in the vehicle and just hook up when I get in. Along with MP3 duties of course. It shouldn't be hard to find or make a USB gender changer with dual connections.
KDOG2020 said:
Yes, my intention would be to leave the GPS antenna in the vehicle and just hook up when I get in. Along with MP3 duties of course. It shouldn't be hard to find or make a USB gender changer with dual connections.
Click to expand...
Click to collapse
Im not following, sorry.
I just ordered a "kit" for my NC actually - a car window mount, and a stand-alone BT GPS. I plan on attaching the the GPS to the window mount via velcro, and leave it in the car. You don't need USB at all (nor would it work, since our nook does not currently support usb host). Just get a BT module, and leave it in the car; connect it to the nook when you need it. done.
Ok I see what your saying. But Im not familiar with Bluetooth recievers. Are we talking about just a regular GPS with a screen and all? Then why hook it up to the nook? Or are we talking about a little box that just sits on the dash or tucked away somewhere?
KDOG2020 said:
Ok I see what your saying. But Im not familiar with Bluetooth recievers. Are we talking about just a regular GPS with a screen and all? Then why hook it up to the nook? Or are we talking about a little box that just sits on the dash or tucked away somewhere?
Click to expand...
Click to collapse
Ah, let me fill ya in then.
What i am talking about are standalone recievers - nothing more than a GPS and BT transmitter. No screen, no frills. Most have batteries that will last for weeks, and are small enough to store anywhere in the car when not in use. YOu can see a good selection here:
http://www.amazon.com/s/ref=nb_sb_n...eiver&keywords=bluetooth+gps+receiver&ie=UTF8
Hope that may give you some new ideas.
Aaaahhhh..... yes I see now. So it would be just a matter of finding one thats compatible with our NC's and the software for it... cool. Anyway to know which one works the best for the Nook?
KDOG2020 said:
Aaaahhhh..... yes I see now. So it would be just a matter of finding one thats compatible with our NC's and the software for it... cool. Anyway to know which one works the best for the Nook?
Click to expand...
Click to collapse
Now, i guess i cannot guarantee, but in theory, ANY BT gps should work with our system, since all GPS's transmit in the same standard. All you should need for software on the nook will be:
https://market.android.com/details?id=de.mobilej.btgps&feature=search_result
or
https://market.android.com/details?id=googoo.android.btgps&feature=related_apps
Assuming my GPS arrives sometime soon, i will be able to give ya some first hand advice.
You will still need a data connection if you intend to use Google Maps for your GPS software.
If you want to use it without a data connection, you will need something like this:
https://market.android.com/details?id=com.alk.copilot.market.usa&feature=search_result
"maps stored on your phone, not downloaded"
Also note, Bluetooth range is very limited on the NC. My BT GPS has to be within 2 feet of the NC to connect.
That is true, a stand alone program is the best, but google will cache the maps if you pre-plan the route.
As for distance - with a car mounted GPS< you really don't need to worry about that - the GPS should be by the windshield anyway, so keeping it close to the nook isn't an issue..
What about this Google "Navigation" program that is on the nook? (the blue arrow)
KDOG2020 said:
What about this Google "Navigation" program that is on the nook? (the blue arrow)
Click to expand...
Click to collapse
You'd still need a data connection. The best probable solution would be to tether to a smartphone that has GPS - so the Nook has a data connection for the Google Maps and Navigation, and GPS data from the phone's GPS.
I was interested in the same thing and went so far as to successfully pair my Garmin bluetooth gps unit with my CM7 nook, but I was not able to actually read any gps data. (This unit was successfully used with a linux laptop and car computer, so it works in linux.)
While looking for a way (hack or software) to read the gps data I found the TetherGPS app, which meets my needs- and yes, I have received phone calls and browsed the web on the phone while using nav on the nook without problems.
The biggest issue I have found in the past and NOW is that I do not think much of the other gps nav options available on Android (or linux!) and caching a limited tileset with Google maps is not enough for my needs. My routes often change.
I do have another bluetooth puck around, if I can find it... I will test to see if that one is easier for the Nook to read data from.
rogerdugans said:
I was interested in the same thing and went so far as to successfully pair my Garmin bluetooth gps unit with my CM7 nook, but I was not able to actually read any gps data. (This unit was successfully used with a linux laptop and car computer, so it works in linux.)
While looking for a way (hack or software) to read the gps data I found the TetherGPS app, which meets my needs- and yes, I have received phone calls and browsed the web on the phone while using nav on the nook without problems.
The biggest issue I have found in the past and NOW is that I do not think much of the other gps nav options available on Android (or linux!) and caching a limited tileset with Google maps is not enough for my needs. My routes often change.
I do have another bluetooth puck around, if I can find it... I will test to see if that one is easier for the Nook to read data from.
Click to expand...
Click to collapse
It will pair, but you need to use an intermediary program to access the GPS, like this one:
https://market.android.com/details?id=googoo.android.btgps&feature=related_apps
or this one:
https://market.android.com/details?id=de.mobilej.btgps&feature=search_result
or this:
https://market.android.com/details?...oid.addon.bluetooth.GPS&feature=search_result
I had trouble with some GPS apps.
I was able to use the GPS and data access on my Motorola Cliq to have GPS voice guided navigation.
http://forum.xda-developers.com/showthread.php?p=12076390
That is how I accomplished it.
If you have a hardware GPS, then you only need the 1 app, which is even easier, but I still recommend wifitether or barnicle for data access (you can download the maps for offline use if you plan ahead.)
colorado_al said:
It will pair, but you need to use an intermediary program to access the GPS, like this one:
https://market.android.com/details?id=googoo.android.btgps&feature=related_apps
or this one:
https://market.android.com/details?id=de.mobilej.btgps&feature=search_result
or this:
https://market.android.com/details?...oid.addon.bluetooth.GPS&feature=search_result
Click to expand...
Click to collapse
I actually tried those apps to no avail, which is why I started looking for the other puck (not as accurate but easier to connect) and alternative solutions.
I actually had looked at all of the other (non- Google) nav apps for Android before to use with a now unused Droid (original) but found them all to be ... less than desirable for various reasons.
Note that I am NOT trying to discourage this project- it is possible, I am certain, but much like linux navigation software... lacking a certain "polish" if not functionality.
Related
Hi there,
I did a couple of searches but couldn't come up with anything useful to answer this question:
Is there some way to activate the Kaiser's internal GPS, convert the stream to some universal format (say, NMEA) and pass it to another computer via USB, Bluetooth or WiFi? My idea is to use the Kaiser as an external "USB mouse" like those 80-buck USB Sirfstar III units. At least for me this would open a number of interesting applications on my laptop without having to carry around another GPS device in addition to my mobile phone.
So one possible use for this would be to do live tracking on google earth, Fugawi, OziExplorer or some serious GIS.
Does anyone know if this exists? If I had more time I might try to code something, but I'm swamped at the moment
J
I know there is an app that lets you track yourself via google earth. If you search more I'm certain that was a thread about using the phone as a BT gps device.
I'm bored so I will try searching too.
-------------edit ----------------------
OMG in less then 60 seconds I found your answer. LOL good job searching.
http://users.skynet.be/hofinger/GPS2Blue.html
Hey, thanks for your help despite the sarcasm.
It makes quite a bit of a difference if you know what you're searching for. I was mainly searching for "usb passthrough gps" and variations on "gps passthrough" which clearly lead nowhere.
That software looks like exactly what I was looking for, thanks.
J
Bluetooth, gps, tilt
Thats all I searched for.
GPS gate allows you to use bluetooth or usb. been using it with my work laptop for navigation.
GPS2blue allows external GPS access through bluetooth and IP (wifi or GPRS).
Awesome question and software. Thanks for posting!
Hey guys,
Well I wish to start a small project, where a computer should be able to access wireless internet (3G/HSDPA), WiFi, make calls, maybe use bluetooth, etc... Then I realized that my old HTC TyTn II has all that features... And its faster than the PC im gonne use.
Problem is my HTC screen cracked. So I cant see anything. Thats why I wondered if its possible to set up a Headless Linux System. With that in place I could prob traffic all the things I need via usbnet to the PC (like internet).
The purpose...
Well the reason for this project is a small computer in my car. I ripped out a old laptop and started mounting it in my car. The laptop will then be used to control the HTC, seeing as I doubt one can add external inputs on the HTC. My laptop also has a 10GB HDD and a working screen. So a combo of the two seems fair...
Any advice on this would be very appreciated!
Thanks in advance.
Xethron
I am about to do the same, replacing radio console.
I have some touchscreen lifebooks for this purpose, you can get one for
$100 $200 in miserable state, but to disassemble, who cares
idea was to change dpi in XP and replace explorer on startup, put a 8 button big startup window, with gps, media, video, internet
now you can hook up mobile by "Pocket Controller" it's a reverse remote desktop. you see mobile screen on pc
hope this get you some ideas
How insane is it that you have a computer that is slower then your phone?
There is a program to remote control your phone, I forget the name.
would it be the one I wrote in prev post
you can buy it at soti.net. working pretty good.
no, this one is free. I shall do some digging.
------- edit ---------
Cha Ching
http://www.mtux.com/
and a friend suggested this one.
http://www.julien-manici.com/
can't understand how could I have missed this when I was searching for one, and it's pretty old too. good tip, though too late for me.
Hey guys,
Thanks allot for the replies... I tried MyMobiler but it doesn't want to connect and seeing that I cant see the screen I am not sure whats happening... Appart from that you guys seem to be misunderstanding me totally!
Problem 1, MyMobiler only runs on windows, and I run Linux...
Problem 2, scripts cant be excecuted on the fly and communications between my two computers wont be possible with Windows Mobile.
Problem 3, Windows mobile crashes and my system will fail totally if my system ever crashes!
Besides, windows mobile have allot of junk I dont need. All I want is a simple Linux system on my HTC on which I can ssh in that will give no video output nor receive input from hardware, but that acts completely as a headless system.
It would also be cool if someone can tell me what hardware I can remove and how (Like the screen) in order to minimize power requirements...
So all I need is a version of Linux and a guide to install it so that all the functions work...
Hope this makes more sense...
Xethron
no Xethron, we didn't misunderstood you. I simply wrote what is my concept of laptop in car and ChumleyEX reacted further on my post too.
winmo is not stable, we all know that, but you should know too that linux is not so on winmo devices too. and that it is much more unstable.
It would be very nice indeed if there was no windows at all and everybody would be using linux, but if that would happen, linux would be the same commercial crap as is windows now, because that's what people are after. and that's the market. Nice fancy easy crap.
Though I encourage you to go with your linux idea, with a lot of effort, there could be perfect solution, but again, it would be much easier to just use what we've got.
If you would look around here, you'll see that on xda-dev you'll find a lot of solutions how to make a very tiny and fast winmo ROM. Stripped of all the crap. You can learn here how to strip even more, leaving only kernel + some drivers if you want.
What hw can you disconnect. I reckon you mean from pda. As you said screen backlight, that's a power eater, otherwise, devices could be turned ON/OFF from sw, which would by much safer/easier way. And you said you want to use them. instead, if you'll connect external antenna, that would spare you a lot of power while transmitting.
You should write more specific questions in order to get specific answers.
for example I am not getting it why you would want to spare 20mA consumption on some pda device and not better think about replacing HDD by CF card or ssd?
what would be your application requirements?
back for using pda in linux, it's in test state, you won't find any better working linux in pda as here. no one is hiding it nowhere. bluetooth is not working yet, phone functions are limited. wifi ok, but I doubt you could route it to PC.
as I doubt one can add external inputs on the HTC
Click to expand...
Click to collapse
yes you can. bluetooth can create virtual com ports. there are BT keyboards, pointing devices too. and generally anything else what uses com port could be made. even video can go out. (all just in windows of course)
for the pda remote programs:
you need a client on pda side. it's automatic simple installation. You may try soti controller it have trial period, with that one, you only need to press left soft key on kaiser to confirm client install. After you'll have this one workingt you would be able to see what you would need with the other one.
wow... that was a useful post!
The reason I want to use the phone is so that my PC can do all the things my phone can do... Reasons for this would be the following.
I come to my car. My phone syncs via bluetooth remotely to unlock my car. I get into car. Type password. Security system goes down... I stream songs via bluetooth to my pc which plays on the car speakers. I get out. Phone looses bluetooth connection and locks automatically. Someone comes and opens the door. PC picks up door is open and sets off an alarm. Phone calls me, and sends me a sms of the GPS location... If I dont respond it sends a email to all my friends. I connect to my car via ssh and keep track of its current position. depending on other connections I have made (Like you said bluetooth might be a good bet) i can controll parts of the car via ssh. Maybe install a fuel cutoff switch or whatever. With allot of effort I get my car back. Come home. It syncs wia wifi. New music gets uploaded... And my car is ready for day 2!
Simple direction of where I wanne go...
So now that you understand what I want to do... The linux on my HTC was a way for me to simply control the hardware and run a few small scripts... Wanne run some security scripts on the HTC instead of PC because it has the backup battery and the laptop will be running off the car battery...
I really don't care how we do this... But I know it must be possible to do all this somehow...
Let me know if you have some rad other ideas... As you can see I do not really want to "see" wats going on on my phone... It must be there like the PC of a car... Tell you the tempreture on some LCD. Let you know the water level is fine... But you dont see the PC... Thats my idea anyway...
Thanks for your help so far
I come to my car. My phone syncs via bluetooth remotely to unlock my car. I get into car. Type password. Security system goes down...
........
I get out. Phone looses bluetooth connection and locks automatically.
Click to expand...
Click to collapse
bluetooth is a secure way, but not very safe, I've been using 3 different Hsets, with 2 diff phones, it kept on loosing connection and some even pairing. other thing, you need to iniciate BT connection (not always with audio, but yes with activesync) that means no touch-less access. and the last is battery consuption. I've been reading long time ago about an application for garage doors based on wifi connections. they discussed BT as well, decided wifi would be much better, try google (open garage wifi) there is even an soft for pda for this.
but there are $50 - $80 ready applications, it's years out there, I reckon the last version would be very reliable.
There is option to put serial GPS, which you can get off ebay for $50 (here is 5pcs for $50 now, if you'll buy it, i'll get two off you)
http://cgi.ebay.com.au/5-LOT-Garmin...tem&pt=LH_DefaultDomain_0&hash=item35a9b4b768
and the application:
http://www.bladox.com/products.php?lang=en
and I saw other brand with the same thing too.
with this bladox, you can simply set that if you take out key and open & close drivers doors it would lock with timer (that's option what most of available classic alarms too) or a button to lock with timer to leave could be hooked up.
you can set plenty of outputs and inputs, freely configurable. e.g remotely shut the engine, horn the horn, knock on window function...
consuption would be around 20mA on charging mobile. with car battery 100mA is a concern and 200mA permanent current is an issue. (all time running PC = 2A = 2000mA = NO WAY)
locking-unlocking could be done through ring (without answering) or sms.
I would say ring is pretty safe, as who would go through trouble of tempering with gsm switch control to fake your caller ID? (+ who would know about you have this setup + know your car phene num and your phone number)
and if a friend would call you he forget a wallet in your car, you don't need to get up of bed to unlock, just dial.
I stream songs via bluetooth to my pc which plays on the car speakers.
Click to expand...
Click to collapse
audio quality isn't 100% plus maybe switching/pairing and your mobile needs to be on a charge for playing longer through BT -> no wireless.
use your phone in a disk drive mode and play from PC in car OR
your pda in car through SD to USB adapter (TwinMOS GoGo Egg Card Reader)
there would be limit 64GB for sure, maybe 2GB limit (is it SDHC compatible?)
I don't know nothing about it, only that it exists
Someone comes and opens the door. PC picks up door is open and sets off an alarm. Phone calls me, and sends me a sms of the GPS location.
Click to expand...
Click to collapse
..
bladox can do + power on your PC which would start streaming video from web cam, you can call to car and tell the guy how he looks like and where he's going and that police is already waiting there.
It must be there like the PC of a car... Tell you the tempreture on some LCD. Let you know the water level is fine...
Click to expand...
Click to collapse
ha, stop dreaming get OBD II and live it!
connect your car engine through cable OR WIFI!! to PC or PDA!! and look at all temperatures, compression levels, exhaust system, error msgs, and if you like make it active and let your car know you feel like having fun now, or maybe more econo mode other time.
OBD II - all cars since yr 96 on US market, $50 -$100 for interface (soft free)
I'm looking to understand what options exist for tethering the NC to a phone for data. I believe the only method currently supported is by creating an ad-hoc wifi network using software on the phone, and joining this network from the NC.
I have a Blackberry 9700, which cannot be setup as a wifi hotspot. With the release of CM7 build 17, it sounds like Bluetooth works (with limited range). My phone supports Bluetooth tethering because I've set it up with my Windows 7 laptop. I'm curious to find out whether this will be possible with the NC as well.. if not, what other options are there for getting online with my NC (besides having to purchase a phone that has hotspot capability). I used to use PDANet with a Palm Treo back in the day.. I'm also not opposed to physical cable-tethering if this is a possibility.
Thanks in advance.
I would like to know this as well. My Evo is not rooted and I'd like to keep it that way for now, so my only options are PDAnet via physical cable and bluetooth (which I can utilize on CM7 but it breaks wifi) or Easytether (physical).
neoshi said:
I would like to know this as well. My Evo is not rooted and I'd like to keep it that way for now, so my only options are PDAnet via physical cable and bluetooth (which I can utilize on CM7 but it breaks wifi) or Easytether (physical).
Click to expand...
Click to collapse
So are you confirming that you've got Bluetooth tethering working with your phone using CM7? Does the build break wifi permanently, or is it only during BT tethering?
Haven't tried it yet but now that you mention it.. I'm going to try it!
Excellent, can't wait to hear the results..
Will pair, won't connect
Well, that takes that option out of the running. I really prefer a physical connection though, and so far, I haven't seen any micro-micro (assuming this is because of power requirements anyway).
Even with the phone right next to the NC? That's disappointing.. by micro-micro, are you referring to the type of USB cable needed? I don't have the device yet, so I'm not sure what kind of connections it has available. Tethering over BT is the last feature I'm waiting for before pulling the trigger on this bad boy. I plan to use it as a removable CarPC (using my phone for data and an external Bluetooth receiver for GPS).
Yup right next to it. Now, I've seen some guys report that GPS works though via bluetooth and I plan on trying that next (need to charge my BT receiver.. hope the battery still works!). They said you needed a GPS app to fix your location though.
As for micro-micro, yep USB. But then we would probably need a client side app to be able to recognize that kind of connection.
And wifi seems broken with BT ENABLED (not on, just enabled).. going to revert.
Thanks for doing all that testing. Let me know how the pairing goes with your GPS receiver.. if you get that working, you would need GPS software that has all of the maps built-in (since Google Maps, etc, requires a data connection).
My primary use for the NC will be as a car PC, so the only thing holding me back is the Bluetooth tethering with my Blackberry (uses the Dial-Up Networking feature set).
I've been hoping to BT DUN working for my BB 9700 also. At the moment it appears that ppp needs to be enabled in the kernel for this to work. When I run pppd from the comand line it complains about ppp missing from the kernel.
It looks like the pppd program is being compiled with the CM7 build and that the ppp modules can be found in the kernel sources so there is hope. We could ask to have it added as a dynamic module but I not sure how to go about making the request. (I am a noob to the forums and not allowed post in Dev and there may be a another way to make requested that is preferred in any case. )
I also found this program that claims to set up a BT DUN connection via ppp and it does run without faulting on my NC:
android.gval.biz
Thanks for sharing your experiences. I found a post in the developers forum where someone asked how to do the same thing. The link in the response discusses how to get Bluetooth GPS and WiFi tethering to work, but it does not mention Bluetooth tethering to a phone. Unfortunately, I don't have enough posts under my name to respond to that thread, but I've subscribed to it in the hopes that someone else will point it out..
http://forum.xda-developers.com/showpost.php?p=12282264&postcount=281
Same same same same.
Unrooted Evo and although I am having fun with all the great things we can do to our NC's I am really not ready to root my Evo just yet. Having that phone with me is the only reason I am able to walk away from my keyboard at all and just because you can doesn't mean you should.
I run Fedora on my laptop and can tether to my Evo using Azilink and USB cable without a problem but if I wanted to drag my lappie everywhere then the NC wouldn't be any fun atall!
Weird is when we can pair the Evo and the NC via Bluetooth (yes a few inches apart right now) but neither one wants to do the actual connection. The message pops up on both Evo and NC asking to acknowledge the "secret" code and what else to do but say yes to them both. Then they both try and fail to connect.
I guess there is a fix for AdHoc on CM7 but I am not sure how to get the unrooted Evo to create an AdHoc network for the NC to connect to. If anyone has that answer can you let us know? I will keep searching as well.
Deirdre
ok so i was very excited to get the wpa tweak working, got my DS7 on adhoc. have the front end installed and working, gps, internet radio, video player and thinking of how i'm going to build a mount and where to FG it into my truck. then my wife shattered my good time by asking "how are you going to hook up the back up camera?". my heart dropped, it sank even lower when i searched for video cables and couldnt find anything. so i ask, is there a way to get video in to have a back up camera play on my DS7?
wow 106 views and not one reply? i'm guessing that means no video in nor out huh?
since the wifi or bluetooth are about the only way to connect I would suggest trying that. the cable's not likely to work. try the droid wireless webcam app, for a starting point.
I'm not a dev so that's the best help I can offer.
Chemus said:
since the wifi or bluetooth are about the only way to connect I would suggest trying that. the cable's not likely to work. try the droid wireless webcam app, for a starting point.
I'm not a dev so that's the best help I can offer.
Click to expand...
Click to collapse
i think you misunderstood, i want to connect my back up(attached to my vehicle) and have it displayed on my DS7
no I understood, I'm suggesting that you look for a way to make your backup camera wireless. I realize that the program I talked about is used to send video from the droid over ip. It's the closest thing I can think of to what you would need, even though it in the wrong direction.
well, I suppose the best thing to do would be to find a bluetooth webcam and some ducttape. elsewise a usb to bluetooth converter. unless you're willing to go the insane route.
1. get a cheapy Latitude off Ebay.
2. hook your backup cam to the laptop.
3. keep the laptop on car power with an inverter
4. Install Ubuntu, set up webcam software, hook it to the net with skype, set skype to auto answer with video and set the laptop to stay on when closed.
5. install a working skype on your tablet.
6. Call your bad laptop w/ skype whenever you need the backup cam.
cheap old latitudes are everywhere, for instance:
http://cgi.ebay.com/Dell-Latitude-C...ptops_Nov05&hash=item27bd70783c#ht_500wt_1156
http://cgi.ebay.com/DELL-LATITUDE-C...43370682?pt=Laptops_Nov05&hash=item4aadcb6fba
http://cgi.ebay.com/Dell-Latitude-D...ptops_Nov05&hash=item43a8fbe4ab#ht_656wt_1185
Ummm yeah, the DS7 has no video "input" for analog or digital video, output only via the PDMI through the dock (or hacked cable with decoder/encoder chip) .. So the only way to get video IN to the DS7 is wireless of some kind.
well i think i will get a used mirror for my truck and try to back mount a small monitor. that or just get a nice double din and retro fit that
angruss said:
well, I suppose the best thing to do would be to find a bluetooth webcam and some ducttape. elsewise a usb to bluetooth converter. unless you're willing to go the insane route.
1. get a cheapy Latitude off Ebay.
2. hook your backup cam to the laptop.
3. keep the laptop on car power with an inverter
4. Install Ubuntu, set up webcam software, hook it to the net with skype, set skype to auto answer with video and set the laptop to stay on when closed.
5. install a working skype on your tablet.
6. Call your bad laptop w/ skype whenever you need the backup cam.
cheap old latitudes are everywhere, for instance:
http://cgi.ebay.com/Dell-Latitude-C400-Notebook-/170681989180?pt=Laptops_Nov05&hash=item27bd70783c#ht_500wt_1156
http://cgi.ebay.com/DELL-LATITUDE-CPi-PENTIUM-NOTEBOOK-LAPTOP-Loaded-Clean-/320743370682?pt=Laptops_Nov05&hash=item4aadcb6fba
http://cgi.ebay.com/Dell-Latitude-D600-ST-D3KBG41-1-4GHz-Used-Laptop-/290597889195?pt=Laptops_Nov05&hash=item43a8fbe4ab#ht_656wt_1185
Click to expand...
Click to collapse
Lol I used to do this as a baby monitor. Worked very well !!
Hi, I'm thinking of getting a 7" tablet to install in my car, I'm not looking for anything super high spec as I'm literally just going to use it for mapping and playing music. That being said, the nook HD looks like a really good spec for the price..
I've just got a few questions
It doesn't have GPS, but I assume it will work using a bluetooth GPS once I've installed CM10?
I understand it uses a proprietary usb cable, how far does it stick out? Does anyone have a picture of it? This may be me only problem mounting it in dash as I wont be able to find a right angled one!
Yes, you can use a Bluetooth GPS puck. I haven't gotten Google Maps to work with it yet but I have gotten other programs to see it. A 3rd party GPS program should work with it. I'm still planning on testing that theory but to much family stuff has been going on right now to actually do it.
With the connector and the way the cable is wrapped right next to it it sticks out about an inch (just a little under that) from the bottom of the device. I'm pretty sure that to much pressure on that part of the cable will make is useless so you would have to make allowances for it. Also, it needs more power than a normal micro usb cable to actually make it charge. The AC adapter puts out 1 volt at 2 amps.
Got Sygic working today. Had to use this program to get it working though. https://play.google.com/store/apps/...?t=W251bGwsMSwyLDYsImRlLm1vYmlsZWouYnRncHMiXQ..
Other then that seems to work quite well. I should mention that I am on CM10.1.
I got Google maps to work fine with my phone using Bluetooth for gps and Wi-Fi for data.
Have to see up maps to accept debug data and use bluetooth gps programs on both devices
Sent from my Galaxy Nexus using xda app-developers app