Database Develop

[RECOVERY][MOD] BAmod Recovery v1.0 (AMOLED AND SLCD!)

I was a little tired of the look of recovery (that green is meh). So I decided to build a custom recovery with a little help from adrynalne and from the CM IRC folks with my added touches.
Please note: DO NOT CONSIDER THIS CLOCKWORKMOD. (Yes it's based off of clockworkmod). DO NOT ASK KOUSH for help with this. If you're having a problem, contact me on twitter (@berzerker7), on irc in ##incredibleroms on freenode, or PM me or reply here or something and I'll help you however I can.
The images were also replaced with the ones from the original Incredible recovery image so it matches the incredible look.
Also included is the super trackpad scroll fix from adrynalyne's custom recovery (hence the B and A in the name).
According to testing, this also works fine with ROM Manager!
Droid Red:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CM Cyan:
Terminal Green:
Royal Purple:
Bumblebee Yellow:
THIS DOES, IN FACT, WORK FOR SLCD. The kernel support from adrynalyne has SLCD support!
Downloads:
BAmod Recovery Droid Red: PB31IMG or .img
BAmod Recovery CM Cyan: PB31IMG or .img
BAmod Recovery Terminal Green: PB31IMG or .img
BAmod Recovery Bumblebee Yellow: PB31IMG or .img
BAmod Recovery Royal Purple: PB31IMG or .img
revert.zip
Installation instructions:
Start here: these are the steps you need to get BAMod to work with ROM Manager:
1. Open ROM Manager, let it detect whatever it needs to detect.
2. Tap on "Flash ClockworkMod Recovery." It should say "Current Recovery: ClockworkMod 2.5.1.2" (or whatever the newest version is) after that.
3. Proceed to install BAMod recovery using any of the three options listed below.
4. Until there's another CWM update, RM should keep thinking you have the latest CWM installed and it should work fine (tested as I typed this).
Note: If there's ever another update, repeat the installation procedure.
Option 1: Using unrevoked
1. Open the unrevoked tool, choose File > Custom recovery, and choose the BAmod img file.
2. Run the tool as you did before and it should install the recovery after it's finished.
Option 2: Manually
1. Download the color of your choice and revert.zip from the downloads above.
2. Push the recovery image and the flash_image binary from revert.zip to /data/local
3. run the following commands:
Code:
adb shell
# cd /data/local
# chmod 755 flash_image
# flash_image recovery BAmod_1.0-<color>.img
That last command is very important, don't misspell anything and make sure you replace <color> with the color you downloaded (red, cyan, etc.).
Option 3: Using a PB31IMG.zip through HBOOT (S-OFF only)
1. Download the PB31IMG of your choice from the downloads above (green, cyan, etc.) and put it on your SDCard named "PB31IMG.zip"
2. Reboot into HBOOT by doing one of the following:
a. Turn the phone completely off, hold the volume down button, then turn it back on while still holding the volume down button.
b.
Code:
adb reboot oem-42
3. If you did this correctly, HBOOT should detect the PB31IMG.zip and ask you to update listing RECOVERY as the only partition. Choose volume up (yes) and it will complete in about 1-2 seconds.
4. When it asks you to reboot, choose volume down (no) and then volume down again to highlight on recovery and press the power button. The phone should boot into recovery so you can see if it worked or not!
4a. If HBOOT didn't detect the PB31IMG.zip, you either didn't name it correctly (check for hidden file extensions), or your SDCard isn't properly formatted (should be FAT32).
Changelog:
1.0
-Initial release
-Based on CWM 2.5.0.9 from latest koush github.
-Swapped out for HTC themed recovery images
Special, special thanks to adrynalyne for his kernel support for SLCD and super scrolling, to koush for his awesome recovery and putting up with my stupid questions, and to #cyanogenmod for source building help

Nice work man! I've got an AMOLED but I'm still gonna give this a go. I'm liking the red.

this does infact work with ROM manager so i would post that in the op
Thanks man great work!!!

This is a nice touch. Since it contains the scrolling fix, I assume it is based off CWM 2.5.0.5?
Also, it is fairly trivial to package up a recovery in a PB31IMG.zip - all you need to do is download a working zip and replace the img file with yours. You're more likely to get people to install it that way.

It's based off of 2.5.0.9, with adrynalyne's kernel fix, which is essentially what the latest clockwork is anyway.

All three links bring up a monstrous page of code with no download. Just an FYI. I'd love to give this a run.
Sent from my ADR6300 using XDA App

right click, save as.

Ah, sensible. Keeps people from downloading on their phones. Smart moves.
Thank you, sir!
Edit: Or rather, the XDA App.
Sent from my ADR6300 using XDA App

Are you planning to make a zip flashable from hboot?

noice, now my recovery matches the rest of my red theme!

Possibly, might be up later tonight or tomorrow.

Berzerker7 said:
Possibly, might be up later tonight or tomorrow.
Click to expand...
Click to collapse
Cool! looking forward to it ^^
Nice work here man

Well done bezerker. Congrats on finally getting it done.

This is awshome!!!!

nice job!!!!

cant get it to install from unrevoked or cmd.exe lol

looks great, easy install from unrevoked

RLKirk said:
cant get it to install from unrevoked or cmd.exe lol
Click to expand...
Click to collapse
What problem are you having? IMO the easier method is through ADB if you're on windows.

still planning on making a PB31IMG for it? should be pretty simple.
EDIT:
i didnt want to wait
i liked the red one, heres the PB31IMG for it. obviosuly you gotta rename it, i just have it named like to to distnguish from all the other files with te same name. drop it on your sdcard, boot into HBOOT and apply the update
http://dl.dropbox.com/u/6889440/PB31IMG-newrecovery.zip

Thanks, I'll post this in the OP along with versions for the cyan/green one later today.

[TOOLKIT][FLASHER]Desire C Toolk!t v1.5(25/04/13)[Recovery/Kernel/Root/Bootloader]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Presenting to You
HTC DESIRE C TOOLK!T by TeKnoGin
DISCLAIMER
Code:
[FONT="Century Gothic"]* TheRedHunter has not only tested the tool but has confirmed that it is working. (POST 2)
So first of all a big thanks to him for taking the risk and testing the toolkit.
* I am not responsible if your device gets bricked or something
happens so I recommend that you get a stock rom ready.
* You will need an Unlocked Bootloader which means you have
already void your warranty. [URL="http://forum.xda-developers.com/showthread.php?p=40690862"]If you haven't unlocked it yet then here is a guide[/URL][/FONT]
Code:
[FONT="Century Gothic"]The toolkit provides the user (basically new users) to flash Recoveries and
Kernels (even ROMs which will be updated soon) to your DESIRE C.
# The update v1.5 will also provide users with two new features that is ***unlocking bootloader***
(giving you the oem unlock code) and ***rooting your device***
[SIZE="5"][COLOR="DarkGreen"]Desire C Toolk!t v1.0[/COLOR][/SIZE]
# Flashing Custom Recoveries:-
> ClockWorkMod Recovery 6.0.3.0 (TOUCH) by mehmehmen [URL="http://forum.xda-developers.com/showthread.php?t=2231101"]LINK HERE[/URL]
> ClockWorkMod Recovery Stable by mmmcfc [URL="http://forum.xda-developers.com/showthread.php?t=1785010"]LINK HERE[/URL]
> ClockWorkMod Recovery 5.5.0.4 (TOUCH) by munjeni [URL="http://forum.xda-developers.com/showthread.php?t=1829649"]LINK HERE[/URL]
> TWRP Recovery 2.5.0.0 by nikhil16242 [URL="http://forum.xda-developers.com/showthread.php?t=2148015"]LINK HERE[/URL]
> Your Own Recovery Whichever You Want (if you have any new one please
tell me too)
# Flashing Custom Kernels
> Prometheus Kernel by nikhil16242 [URL="http://forum.xda-developers.com/showthread.php?t=2192750"]LINK HERE[/URL]
> Your Own Desired Kernel[/FONT]
[SIZE="5"][COLOR="DarkGreen"]Desire C Toolk!t v1.5[/COLOR][/SIZE]
# Rooting your phone
> Root your Desire C with just a click. Rooting process uses [URL="http://www.modaco.com/topic/355158-r1-superboot-how-to-root-the-htc-desire-c/"]Superboot[/URL]
to get root access and then provide permanent root to the users.
> Unlock Bootloader [OPENS THE LINK] (BY THE WAY HERE IS A GUIDE TOO:-
[URL="http://forum.xda-developers.com/showthread.php?p=40690862"]http://forum.xda-developers.com/showthread.php?p=40690862[/URL])
Code:
[FONT="Century Gothic"]
# * Extract the "toolkit_desire_c.zip" to somewhere like Desktop.
* Connect your Desire C with USB Debugging Enabled.
* Run "recovery.bat".
* Select your Desired Option.
* Just wait.......
# *To Flash Your Own Desired RECOVERY or KERNEL [COLOR="Red"]
+ Make sure you rename your recovery to ****recovery.img**** (without starsigns)
and place it in the "own" folder and then select option 7.
+ Make sure you rename your kernel (img file) to ****boot.img**** (without starsigns)
and place it in the "own folder " and then select option 6.[/COLOR][/FONT]
Code:
[FONT="Century Gothic"] Mirrors will be coming soon till then no mirrors please....
[SIZE="4"][COLOR="DarkGreen"]Desire C ToolK!t v 1.0[/COLOR][/SIZE]
# Skydrive:- [URL="http://sdrv.ms/13swfZ6"]http://sdrv.ms/13swfZ6[/URL][COLOR="Red"]{COMPATIBLE with all COMPRESSION SOFTWARE
thnx to [URL="http://forum.xda-developers.com/member.php?u=5091745"]noahvt[/URL]}[/COLOR]
# Dev-Host:- [URL="http://d-h.st/cuR"]http://d-h.st/cuR[/URL]
[SIZE="4"][COLOR="DarkGreen"]Desire C ToolK!t v 1.5[/COLOR][/SIZE]
# Skydrive:- [URL="http://sdrv.ms/17Z1nTE"]http://sdrv.ms/17Z1nTE[/URL]
# Dev-Host:- [URL="http://d-h.st/N92"]http://d-h.st/N92[/URL]
[/FONT]
​

Nice tool, I'll test it as soon as I'll be home.
Edit: Your toolkit works like a charm. This is the easiest way to flash kernels/recoveries I've ever used.

Doesn't work: unknown compression method in winrar,winzip and standard windows extraction program!

TheRedHunter said:
Nice tool, I'll test it as soon as I'll be home.
Click to expand...
Click to collapse
Thnx Man Report here asap whether it is working or not??
Just try and test each one.

noahvt said:
Doesn't work: unknown compression method in winrar,winzip and standard windows extraction program!
Click to expand...
Click to collapse
Try it with 7-zip.
I compressed it using 7-zip.....
btw i'll see to make it work with winzip, winrar and other compression software.

Update
I'll update a compressed version which will be compatible with all compression software soon.
Edit: UPDATED

Huston we've got a problem. It's something wrong with my port...but what is the connection between a port and a recovery flash ?4
Problem solved, thank you.

Solution
Here is a fix to that problem.
http://themikmik.com/showthread.php?15885-ADB-Server-didn-t-Ack-Error-SOLVED
Run the batch file ....TRY IT.....
Download it here:- http://sdrv.ms/14MRGJ8
there are two reasons for this error:-
1. when no device is connected
2. when HTCSyncManager.exe is already using adb servers

Worked like a charm, thank you very much! :good:

FusionX3 said:
Worked like a charm, thank you very much! :good:
Click to expand...
Click to collapse
Happy to Help

I tried to install the Prometheus kernel too now. It wrote Writing Successful but when the phone tries to boot it's stuck at the white HTC screen with the red text (This build is for development purposes only ...). What should I do?
EDIT: I tried to restore to a previous backup, I tried to install a custom ROM I had on my SD Card, none of that worked.

FusionX3 said:
I tried to install the Prometheus kernel too now. It wrote Writing Successful but when the phone tries to boot it's stuck at the white HTC screen with the red text (This build is for development purposes only ...). What should I do?
EDIT: I tried to restore to a previous backup, I tried to install a custom ROM I had on my SD Card, none of that worked.
Click to expand...
Click to collapse
But thats working with my phone......
I tried installing Prometheus Kernel and it was successful....
Try installing the kernel manually.
1. Switch Off your phone and then boot into fastboot mode.
2. Connect your phone to the computer.
3. Open a command prompt in the "tools" folder.
4. Run the following command
"fastboot flash boot boot.img" (without quotes)
5. restart your phone with this command
"fastboot restart"
Tell me whether that worked or not.
Taking the case of the backup or flashing the ROM which recovery did you flashed???
I would recommend you to flash the CWM 6.0.3.0 TOUCH recovery which doesn't till now has a bug.
For this repeat the steps in this post and instead of step 4 just run the following command:
"fastboot flash recovery recovery_touch_6_0_3_0.img"
Then try to flash the ROM.
If it says "Install from sdcard failed" or something like that then retry downloading the ROM.
If nothing works then try FLASHING STOCK ROM...
Edit: How can a restore fail ? What error does it show? Did you change the recovery? Are the recoveries different i.e. the one with which you backed up and the one which you are trying to restore????

TeKnoGin said:
But thats working with my phone......
I tried installing Prometheus Kernel and it was successful....
Try installing the kernel manually.
1. Switch Off your phone and then boot into fastboot mode.
2. Connect your phone to the computer.
3. Open a command prompt in the "tools" folder.
4. Run the following command
"fastboot flash boot boot.img" (without quotes)
5. restart your phone with this command
"fastboot restart"
Tell me whether that worked or not.
Taking the case of the backup or flashing the ROM which recovery did you flashed???
I would recommend you to flash the CWM 6.0.3.0 TOUCH recovery which doesn't till now has a bug.
For this repeat the steps in this post and instead of step 4 just run the following command:
"fastboot flash recovery recovery_touch_6_0_3_0.img"
Then try to flash the ROM.
If it says "Install from sdcard failed" or something like that then retry downloading the ROM.
If nothing works then try FLASHING STOCK ROM...
Edit: How can a restore fail ? What error does it show? Did you change the recovery? Are the recoveries different i.e. the one with which you backed up and the one which you are trying to restore????
Click to expand...
Click to collapse
I resolved the problem. I installed the smallest version (700) of the Prometheus kernel, and that worked.

[Recovery] ClockworkMod - TF701T Proxy Thread

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS IS A PROXY THREAD Creator and Maintainer is pershoot
This is CWM for the ASUS Transformer Pad (TF701T – Macallan).
-You must be unlocked (use ASUS’s unlock tool to perform this)
-You must be on 10.26.1.18 bootloader (updating to ASUS’s latest 4.3 release will install this)
For complete Info and Download: VISIT HERE
***Once there, check out the Recent Entries on the right side of the page for latest updates***
-Unlock your device using the ASUS Unlock tool.
-Boot in once and execute: adb reboot bootloader
Fastboot:
To boot the recovery:
fastboot boot recovery.img
To permanently flash the recovery:
fastboot flash recovery recovery.img
Source:
https://github.com/pershoot/android_device_asus_tf701t
https://github.com/pershoot/android_kernel_asus_tf701t
https://github.com/CyanogenMod/android_bootable_recovery
Creator and Maintainer:
@pershoot

Video Tutorial
Video Tutorial Thanks @wwjoshdew

Ah just saw screenies. Nice job pershoot.
Why is the version still 6.0.4.6?

CWM 6.0.4.7
OP Updated

Feb/2 OP updated

Small question: my device is on 10.26.1.17. Updating to the latest official 4.3 will definitely wipe the CWM recovery, and probably will make some of the apps not running any more (not mentioning loosing root, etc..)
Is it possible to install the CWM on such a ROM version (10.26.1.17) ? I've just tested booting it and booting (and using it as a backup) works.

I was on 6.0.4.6 and i used flashify to update. Worked fine.

hetzbh said:
Small question: my device is on 10.26.1.17. Updating to the latest official 4.3 will definitely wipe the CWM recovery, and probably will make some of the apps not running any more (not mentioning loosing root, etc..)
Is it possible to install the CWM on such a ROM version (10.26.1.17) ? I've just tested booting it and booting (and using it as a backup) works.
Click to expand...
Click to collapse
Both cromix and cm11 will require the latest bootloader to eliminate compatibility issues it is recommended to flash to the latest asus firmware
Sent from my SGH-T889 using XDA Premium 4 mobile app

@AngryDinosaur - I made a video on how to install Custom Recovery on your Transformer Pad TF701T!
http://www.youtube.com/watch?v=3IBN1YkBp3g

wwjoshdew said:
@AngryDinosaur - I made a video on how to install Custom Recovery on your Transformer Pad TF701T!
http://www.youtube.com/watch?v=3IBN1YkBp3g
Click to expand...
Click to collapse
included in the post alongside the screenshots. Thanks a lot!!!

OP updated 2/16, installation video tutorial included. Thanks to @wwjoshdew

recovery updated with baseline build and sorted dock sd card functionality and usbdisk functionality.

@pershoot I'd love for this recovery to include touch screen drivers. That way at least aroma could use the touch screen. Any ideas how to compile with the standard drivers included?

sbdags said:
@pershoot I'd love for this recovery to include touch screen drivers. That way at least aroma could use the touch screen. Any ideas how to compile with the standard drivers included?
Click to expand...
Click to collapse
i'll look in to it...

I'm getting a weird error I've never seen before trying to flash something with fastboot. :
fastboot flash recovery recovery.img
target reported max download size of 643825664 bytes
error: cannot load 'recovery.img' : No error
Any ideas?

lortay78 said:
I'm getting a weird error I've never seen before trying to flash something with fastboot. :
fastboot flash recovery recovery.img
target reported max download size of 643825664 bytes
error: cannot load 'recovery.img' : No error
Any ideas?
Click to expand...
Click to collapse
Make sure recovery.img is in the same folder as fastboot and you are running the cmd prompt from that folder.

sbdags said:
Make sure recovery.img is in the same folder as fastboot and you are running the cmd prompt from that folder.
Click to expand...
Click to collapse
Duh, I have platform-tools in my path so I can run them from anywhere. I forgot to cd to the directory. Thanks for airing out my brain fart.

lortay78 said:
Duh, I have platform-tools in my path so I can run them from anywhere. I forgot to cd to the directory. Thanks for airing out my brain fart.
Click to expand...
Click to collapse
Very common mistake that happens to the best of us

updated.

Hi,
I spent hours trying to get this to work before discovering there are two missing steps in the OP's instructions.
There's a shell script that calls an application that restores the stock boot loader on every boot.
You have to delete it.
Steps:
1. Root.
2. Install Root Explorer.
3. Go into /etc
4. Delete install_recovery.sh
5. Go into /system
6. Delete recovery-from-boot.p
You have to delete the files. You can't just rename them or change the extension because the system actually searches the filesystem for a file whose contents matches an MD5 hash and will find it if you rename it.
After you do this, THEN follow OP's instructions.

[TUT][HOW-TO] How to root Xiaomi Redmi2 and install CWM

ARE YOU SEARCHING TO ROOT YOUR REDMI 2 ?​
DISCLAIMER:​DO THIS ON YOUR OWN. I'M NOT RESPONSIBLE FOR ANYTHING HAPPENS TO YOU AND YOUR DEVICE.​PLEASE DONOT MIRROR THE LINKS​
CLICK HERE FOR NATIVE ROOT​
IF YOU ARE GETTING STOCK RECOVERY EVEN AFTER FLASHIN CWM, SEE THIS POST​
STEP 1- FLASHING CWM ON YOUR PHONE
1.At first, you'll need the "adb" and "fastboot" tools. Get them HERE
2.Extract them into a folder, let's name it "Redmi2" (You can give your own name to the folder. That doesn't matter here.)
3.Now get the CWM .img file from HERE
You can use Philz Touch recovery also. Get HERE
4.Rename cwm.img or philz.img you downloaded above and as "recovery.img" and place it in the Redmi2 folder.
Now the folder will look like this-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5.Press and hold "shift" button and right click in the blank area of the folder and click on "open command promt window here". The command prompt will open.
6.Now turn off your Redmi2. Wait until it vibrates. After it's vibrated press and hold "Volume down and Power" keys together until it boots into "fastboot mode". Now connect the Redmi2 to your PC/Laptop through USB cable in fastboot mode itself.
7.Get to the command prompt now.
Now type: " fastboot devices " (without these- " " )
Like this-
8.Once you enter that command, you will get a non-empty name for the device meaning the device is connected. Proceed to enter the next command
9.Now enter the next command: " fastboot flash recovery recovery.img "
Like this-
10. Now this ends...
Type the last command: " fastboot reboot "
Like this-
11.Now your phone will reboot with ClockWorkMod(CWM) installed. CHEERS...
STEP 2- ROOTING YOUR PHONE
1. Firstly get the SuperSU.zip from HERE
2. Now copy the downloaded zip to your sdcard (not in any folder just in sdcard)
3. Boot into CWM recovery by turning off the phone and pressing "Volume UP and Power" button together after the phone vibrates.
4. Once CWM main menu is displayed, select "Install from zip" and browse to the zip that you downloaded earlier and select it.
5. Install the zip. If you get any warning, ignore and proceed.
6. After the installation is complete, reboot your device. (I think you can do that)
7. VOILA..!!! YOU ROOTED YOUR REDMI2
PLEASE HIT THANKS​
JOIN OUR FACEBOOK GROUP HERE​
CREDITS:
1. I don't claim any credit for "adb and fastboot tools" and the "recovery.img" and "SuperSu.zip"
2. Thanks to @subhrajiNath on Miui english forums who wrote the original guides.
Thread link is here and here​

I cannot connect to device using adb on ubuntu.
Any Idea ?
I have opened a thread about this issue here

postadelmaga said:
I cannot connect to device using adb on ubuntu.
Any Idea ?
I have opened a thread about this issue here
Click to expand...
Click to collapse
I'm really sorry man..I've never used ubuntu But I wish to...
Join the FB group and ask there...Maybe it can be helpfull

? not flashing ?
noobpremium said:
I'm really sorry man..I've never used ubuntu But I wish to...
Join the FB group and ask there...Maybe it can be helpfull
Click to expand...
Click to collapse
Ok my fault, It looks I miss the notification MIUI that ask me to allow my pc to dev mode...
Now I have another issue:
After I flash the recovery with flashboot I reboot into recovery but I still have the default one ... not CWM any idea what could be wrong ?
( I have already did this procedure on another phone, same issue but after doing it a couple of time something make the difference )

postadelmaga said:
Ok my fault, It looks I miss the notification MIUI that ask me to allow my pc to dev mode...
Now I have another issue:
After I flash the recovery with flashboot I reboot into recovery but I still have the default one ... not CWM any idea what could be wrong ?
( I have already did this procedure on another phone, same issue but after doing it a couple of time something make the difference )
Click to expand...
Click to collapse
get "Flashify" app from playstore and first take backup of stock recovery and then flash the cwm with it. Thats it..
Actually I didn't knew this method before i made this guide..
Anyway, fastboot gives us a different feel, doesn't it? :v

wait I don't know flashify but it looks it needs root to flash the recovery ... but I think I need cwm to root ... so I think this is not gonna work ...
Ok got it, this may be useful to anybody face the issue with recovery:
I discovered you can workaround the issue in this way:
Temporary boot into CWM:
HTML:
fastboot boot recovery.img
Root the device using CWM
Flash CWM using flashify
[ CWM when you log out ask you for root so maybe it is not necessary to use the zip file ( but I'm not very expert so maybe I'm wrong)]
You can install GAPPS with CWM `gapps-kk-20140606-signed .zip` but be careful, whenever you update MIUI you will look all software installed using CWM. ( superSu and GAPPS for example )

thanks
thanks!

eienkisu said:
thanks!
Click to expand...
Click to collapse
Pleasure

Okay bro :good:
I'll update the OP

I confirm #postadelmaga the CWM recovery does not stay, the only way to do access it is the fastboot boot recovery.img Here's how I succeeded with two phones now.
power on, start wifi, do Miui updates
install ADB or the files above on PC
reboot to fastboot with voldown+pwr
now comes fastboot boot recovery.img
in CWM, sideload SuperSu and Gapps
connect you preferred VPN (if in China)
install and update all Google apps needed
delete most Chinese apps

hey i m unable to flash recovery plzz help
Device version 2014818
Sent from my 2014818

Hi buddy could you plz port touchwiz from galaxy prime?

The simpler solution is to use the xiaomi update tool and flash a developer rom that has builtin root.
http://xiaomi.eu/community/threads/5-4-10.27429/
howto & root from permissions menu:
https://watchpage.wordpress.com/201...redmi-note-4g-developers-roms-version-miui-6/
But to have the cwm running on the phone is always a safe bet for some recovery actions.

not working.
I tried this method. its stuck with flashing the recovery image. always showing flashing the recovery image.... that's all.

godwintgn said:
I tried this method. its stuck with flashing the recovery image. always showing flashing the recovery image.... that's all.
Click to expand...
Click to collapse
Are you on win7? I got this same issue on my win7... try on win8 it works flawlessly
Please hit thanks if done

Ya bro I am using Windows 7. I don't have Windows 8. Thanks for the info.

Shrihari007 said:
Hi buddy could you plz port touchwiz from galaxy prime?
Click to expand...
Click to collapse
TW sucks man.. why do you want it :/ anyways I'll try

leuk_he said:
The simpler solution is to use the xiaomi update tool and flash a developer rom that has builtin root.
http://xiaomi.eu/community/threads/5-4-10.27429/
howto & root from permissions menu:
https://watchpage.wordpress.com/201...redmi-note-4g-developers-roms-version-miui-6/
But to have the cwm running on the phone is always a safe bet for some recovery actions.
Click to expand...
Click to collapse
Thanks to you bro.. I'll update the OP for those who are facing some issues with my guide's precedure..

OP Updated
I've updated the OP with the other guide's link.. please check it out if you're having some issues with this one

godwintgn said:
Ya bro I am using Windows 7. I don't have Windows 8. Thanks for the info.
Click to expand...
Click to collapse
Try on some friend's PC or something

[UPDATED] [FIX] HTC Desire 626g+ update (no command error) fix!

Halo all
Most owners here have rooted (kingroot) their system and attempted to update the rom, forgetting OTA conflicts. Although the consequences are usually resolvable, not in the case of mediatek and our model.
To start, I highly recommend using Ubuntu linux off a flash drive running live, else I suggest using windows 7 (perhaps in a vm too) although it didn't work with me (mediatek driver issues) (users reported that it works fine with windows 10, set wifi connection as metered to prevent automatic driver updates)
Optional: Create a live Ubuntu (download the 64bit version!) stick using this tut: http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-windows
After booting into Ubuntu, remove modemmanager by typing in terminal : sudo apt-get remove modemmanager
Hit y and continue...
Download folder list:
1)spflashtool from http://spflashtool.com/, "Linux 64-bit"
2)CWM(626g+)
3)Scatter file(626g+)
4)Stock cwm backup ~800MB
Link to Download: me1ga.nz/#F!t1A1HJQJ (rename to "mega")
Decryption key:
Code:
!teT23YQ_1PH52USChW3k6g
Google drive mirror folder: https://drive.google.com/folder/d/0BwgllNFqdXuQMXR0a29mZms2VDA/edit
Skip 1,2,3 for Windows users
Flash time:
1)Extract the zip in Home directory, open Terminal again then cd SP_Flash_Tool_exe_Linux_v5.1520.00.100 (tip: type cd SP then hit tab to autocomplete)
2)then: chmod +x *
3) last: sudo ./flash_tool.sh
4)Choose the scatter file and recovery img downloaded like in the pic (checkboxes too):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5)Make sure your phone is off, click Download then plug in the phone using a USB2 port...
6)CWM installed!
7)extract the stock cwm backup zip to sdcard in this following order of directory: clockworkmod/backup/(the extracted contents here)
8)Reboot the phone by hold Vol Down + Power then leave it, due to the issue it will enter cwm automatically
9)navigate to "backup and restore" and choose restore then the folder your copied (in date format)
10)reboot, dun! :highfive:
Big Credits and thanks to: https://www.facebook.com/htc626gplusdev/info/?tab=page_info , for custom recovery...
Hit thanks if this has helped you, would motivate me to update the links lol

Hi, this is to install the cwm recovery... Right? But how do i flash my phone with an HTC stock rom? Because i don't have a back up to restore my phone. And htc already has a default recovery. Can't i use that to flash my phone with the stock rom file? Maybe via adb sideload?

diml0rd said:
Hi, this is to install the cwm recovery... Right? But how do i flash my phone with an HTC stock rom? Because i don't have a back up to restore my phone. And htc already has a default recovery. Can't i use that to flash my phone with the stock rom file? Maybe via adb sideload?
Click to expand...
Click to collapse
I think understanding the title of the thread would answer your question, no this is not "install the cwm recovery" it is required in order to restore stock ROM unofficially, there is no way around it to date, if you are afraid/don't trust the stock ROM backup I provided, then wait for HTC to release RUU and simply use fastboot to update (? mediatek)...
Follow the steps, I've provided everything, you don’t need a backup, download my backup etc...

tpr0 said:
I think understanding the title of the thread would answer your question, no this is not "install the cwm recovery" it is required in order to restore stock ROM unofficially, there is no way around it to date, if you are afraid/don't trust the stock ROM backup I provided, then wait for HTC to release RUU and simply use fastboot to update (? mediatek)...
Follow the steps, I've provided everything, you don’t need a backup, download my backup etc...
Click to expand...
Click to collapse
Sorry i though your link was an update to cwm, not the rom. Just saw the size of the file. Thanks i will try this. This is what I was looking for actually. Too bad i just deleted my arch Linux though ??

tpr0 said:
I think understanding the title of the thread would answer your question, no this is not "install the cwm recovery" it is required in order to restore stock ROM unofficially, there is no way around it to date, if you are afraid/don't trust the stock ROM backup I provided, then wait for HTC to release RUU and simply use fastboot to update (? mediatek)...
Follow the steps, I've provided everything, you don’t need a backup, download my backup etc...
Click to expand...
Click to collapse
can't download :
https://www.dropbox.com/sh/1oev7ymmh...mXInVs_va?dl=0
returns:
This account's public links are generating too much traffic and have been temporarily disabled!

diml0rd said:
can't download :
https://www.dropbox.com/sh/1oev7ymmh...mXInVs_va?dl=0
returns:
This account's public links are generating too much traffic and have been temporarily disabled!
Click to expand...
Click to collapse
Link updated

Hello, sorry, I have the same problem my phone is 626g, I do not know if this guide is, however, the link ww w.dropbox.com/s/drc102llim...atter.txt?dl=0 and the link:w.dropbox.com/s/wt0r1q8xqs...71609.img?dl=0[/url] not working.
Thank you there is nothing about this problem and service HTC wash their hands with this.

tpr0 said:
I think understanding the title of the thread would answer your question, no this is not "install the cwm recovery" it is required in order to restore stock ROM unofficially, there is no way around it to date, if you are afraid/don't trust the stock ROM backup I provided, then wait for HTC to release RUU and simply use fastboot to update (? mediatek)...
Follow the steps, I've provided everything, you don’t need a backup, download my backup etc...
Click to expand...
Click to collapse
sorry but the other two links are broken as well. i have the STOCK CWM.zip now

Hello again, I found the scatter file. But when you download and plug the USB, I get the following message.
PTM changed for ROM; it must be downloaded
Any help please? I read that this was solved by selecting all + download format rather than just download, but I have some fear in doing this.
Cheers
---------- Post added at 10:13 PM ---------- Previous post was at 09:53 PM ----------
Yes, unfortunately we need these files that are not found anywhere. They would be so kind as to re-upload?
Thank you
Cheers

I've been looking for 3 days and there is no way you're tpr0 alone gives a solution, could you please reupload the files? I am eternally grateful. Thank you very much Greetings.

reprono said:
I've been looking for 3 days and there is no way you're tpr0 alone gives a solution, could you please reupload the files? I am eternally grateful. Thank you very much Greetings.
Click to expand...
Click to collapse
Ch
Can you please be more specific about which file? Here's how it looks on my side : http://m.imgur.com/wKhtNtQ
I'll reupload to Google drive soon :good:

tpr0 said:
Hello, sorry for late, I'm also surprised why this solution isnt popular as many users faced the same issue
Can you please be more specific about which file? Here's how it looks on my side : http://m.imgur.com/wKhtNtQ
I'll reupload to Google drive soon :good:
Click to expand...
Click to collapse
please upload these files to your google drive folder:
2)CWM(626g+): https://www.dropbox.com/s/wt0r1q8xqs...71609.img?dl=0 (source and developer in the credits section)
3)Scatter file(626g+):https://www.dropbox.com/s/drc102llim...atter.txt?dl=0
---
just saw that you already did! :good: thanks

Any guidelines for people who are stuck with windows?

Thanks this worked but now my phone is being recognised as "HTC Desire 320" and every time I boot up it says incorrect CID

alvi.mahmud said:
Any guidelines for people who are stuck with windows?
Click to expand...
Click to collapse
You can use VirtualBox to boot linux, use ubuntu 14.04 iso as 'cdrom', install guest additions then follow the procedure. ill post a quick guide soon :good:

tpr0 said:
You can use VirtualBox to boot linux, use ubuntu 14.04 iso as 'cdrom', install guest additions then follow the procedure. ill post a quick guide soon :good:
Click to expand...
Click to collapse
Mine worked on Windows 10

ahmedshauq said:
Mine worked on Windows 10
Click to expand...
Click to collapse
It 'should' work on windows, though at certain settings Windows updates the driver with incorrect version. I recomended Linux to avoid problems with drivers

ahmedshauq said:
Thanks this worked but now my phone is being recognised as "HTC Desire 320" and every time I boot up it says incorrect CID
Click to expand...
Click to collapse
Anyone know a fix?

I just tried it with same result. But I also noticed that I can use only one sim now (SIM management in settings is gray) and language is mixed english with czech (my default).

Awaraine said:
I just tried it with same result. But I also noticed that I can use only one sim now (SIM management in settings is gray) and language is mixed english with czech (my default).
Click to expand...
Click to collapse
I can use both Sims though