Database Develop

Big problem about I9000 Warrantly

Today i am going to refresh my rom . After finishing, Galaxy S can not open...
Is Galaxy S or the battery problem?
Have any method to slove this problem?
I bought from Optus in Australia
Now Version is JM5 and he old version is Jm5,if i go to the custom services ,will i cease the warrant?
Thanks everyone to help.

as long as you flashed it with a samsung-made firmware and not a custom ROM, i think your warrantly should still be ok!

If you seek help from the guys here, my guess is that you need to explain a bit more in detail what's not working, besides "cannot open".
"New version is JM5 and old version is JM5" ??

dudeldei said:
If you seek help from the guys here, my guess is that you need to explain a bit more in detail what's not working, besides "cannot open".
"New version is JM5 and old version is JM5" ??
Click to expand...
Click to collapse
"cannot open" mean when i press the turn on/turn off button don't have any respond.
"New version is JM5 and old version is JM5" That is mean Before and after flashing version, the reason of flash again is i can not use Galaxy but i can enter the download mode. i think this information may help you to find mine problems..but i am not sure.

mcall_r said:
as long as you flashed it with a samsung-made firmware and not a custom ROM, i think your warrantly should still be ok!
Click to expand...
Click to collapse
But i refresh Galaxy via Odin, is it still ok?

ososos said:
But i refresh Galaxy via Odin, is it still ok?
Click to expand...
Click to collapse
Flash I9000DTJG4 if you got your phone from Optus in Australia.
Find it here.

i cannot switch on the Galaxy S even by any modes.
Simply, i think it is broken down and I dont know what to do. I am not sure if my warrant is still effective or not.
You know, generally flash the rom will cease warrant.I think people l solve my problem there... Because Xda's is professional...

Can someone move this thread :-(
I almost fell of my chair when reading "BIG PROBLEMS WITH I9000".
Big problem with flashing you mean !!

OH.. sorry .......
Admin move to correct section.
Sorry about that

Try charging the battery. and then switch on the phone..
SGS is pretty unbrickable

No problem
I hope you find a solution quick.

1. If the phone is turned off then remove the SD card, the SIM card and the battery.
2. Put the battery in only then enter Download mode. Hold in vol down and Home buttons then press the power button. Works every time.
3. OPTUS is currently using I9000DTJG4 available here
4. Set up ODIN with the correct files. PIT 512 and the code file called ADD_OPS.tar from the download.
5. Select Re-Partition.
6. Connect your phone to your computer via USB cable. Wait for com to come up in ODIN.
7. Flash the Aussie firmware.
Wish you luck my friend.

no no no... i CANNOT OPEN SGS AT ANY MODE..
It seems sgs don't have the battery... i cannot charge the phone ..

ososos, unfortunately it sounds like a full brick to me. I think there have been about 5 occurrences of this (myself being one of them), one guy managed to get his to power on my holding home + volume down + power and inserting the battery whilst these buttons were being held.
However as a general rule if your phone won't even turn on you'll need to send your phone off for repair.

Hmmm try using some friend's battery if he too has SGS... Or try charging only the battery at optus.. GL mate..

[Q] HELP HELP !!!! Looking Odin upgradable firmware

Hello all,
Bought a galaxy tab. And flashed it. With bad firmware.
I can set TAB in download mode.
So with ODIN I should be able to flash.
Can someone PLEASE!!!!?????? link me or tell me where to find A FULL EURO rom or P1000 compatible rom. That can be flashed with ODIN

Try latest Roto ROM here http://forum.xda-developers.com/showthread.php?t=939360, its okay for Euro Tab...

make a accout here, and you can choise the official firmware.

Samfirmware
Did that flashed and TAB boots and hangs at the SAMSUNG logo.
edit : DId a full whipe did not resolve hanging at the SAMSUNG logo
Used Jk5 with that. Downing Jk2 now.

ovigt71 said:
make a accout here, and you can choise the official firmware.
Click to expand...
Click to collapse
Why would u recommend this? Don't u know that they have locked bootloaders? People who don't understand stuff shouldn't be trying to help. Now he's gonna need to use the bootloader fix which has risks.
From the Tab.
www.twitter.com/ayman07

ayman07 said:
Why would u recommend this? Don't u know that they have locked bootloaders? People who don't understand stuff shouldn't be trying to help. Now he's gonna need to use the bootloader fix which has risks.
Click to expand...
Click to collapse
Only if he flashes one of the JMx series.
Flash the Rotohammer JMI firmware, it's a _complete_ firmware with the locked bootloader removed. If it doesn't work then you've either done something wrong (start again, read instructions carefully), or you've got a locked bootloader.
If you've already tried flashing a JMx firmware and are now having issues then you'll need to go back to whatever original firmware you had and then run the bootloader fix, which as long as you pay attention to the instructions is unlikely to be an issue, get it wrong however and you've got problems.
Also - this is not a development related question, should be in the general subforum.

TAB Dead
Tab is 3 days old and dead.
No recovery mode,
No Download mode,
only a blinking logo (screen of and on) that looks similar to the downloading logo when in flash mode when wall charger is attached.
No live indication or responsive s.
Indicates this a RMA to samsung service center.
Never had A flash or root problem of this kind before.
just the on of screen. If in wrong Category I hope some Admin might want to move it to the correct position.

ayman07 said:
Why would u recommend this? Don't u know that they have locked bootloaders? People who don't understand stuff shouldn't be trying to help. Now he's gonna need to use the bootloader fix which has risks.
From the Tab.
www.twitter.com/ayman07
Click to expand...
Click to collapse
Ok so you can give me a direct link to flashing boot of tab please ?

If it won't even get into download mode then there's nothing you can do to fix it, you'll have to take it back to the shop. Any fixes require being able to boot into download or recovery mode.

chetermaat said:
Tab is 3 days old and dead.
No recovery mode,
No Download mode,
only a blinking logo (screen of and on) that looks similar to the downloading logo when in flash mode when wall charger is attached.
No live indication or responsive s.
Indicates this a RMA to samsung service center.
Never had A flash or root problem of this kind before.
just the on of screen. If in wrong Category I hope some Admin might want to move it to the correct position.
Click to expand...
Click to collapse
Perhaps you mean the logo is phone at the left, middle is ! pc at the right, it's also a download mode, which you can flash thru odin, just flash with roto's rom, and do a repartition.

Basically if odin still able to detect your tab, it's not totally dead yet, if your tab's display is like what I mentioned above, just get roto's rom, AND MAKE SURE CHECKSUM IS CORRECT! Before flashing.

chetermaat said:
Ok so you can give me a direct link to flashing boot of tab please ?
Click to expand...
Click to collapse
Dutch!
http://gathering.tweakers.net/forum/list_message/35564050#35564050

[Q] Bricked NTT DoCoMo Japanese Tab

Ok here goes... This is my first thread post here but I am in serious need of help.
I have searched and searched the forums for a hopeful answer but I have found it difficult to find the answer I seek.
So here is the story:
Bought a GT second hand from Akihabara in Japan which was locked to NTT DoCoMo. I was using it as a WIFI only Tab and all was wonderful till my IT brain decided it could be better and I began to tinker.
I had been looking around for a way to make my Australian Virgin Mobile SIM to work on the tab and found a lot of good answers but nothing that would make it work.
I then had the brilliant idea to change the firmware with a European firmware so I could get all the features enabled from a fresh start. Which is where it all went wrong.
I first tried to flash the tab using Odin 1.7 with the P1000XXJK5 euro firmware from samfirmware.com
This failed and left my tab with the picture of a phone and a pc with a dotted line and in between them an exclamation point in a triangle.
After a lot of fiddling (I dont remember what I did but I managed to get rid of that screen had something to do with retrying the flash and it was very late last night at this point) I managed to try again but Odin just kept failing on running the updated firmware.
I then decided that it would be a good idea to run the Rotohammer firmware by following the instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=895827&highlight=sc-01c
This is where I once again received errors from Odin and now my tab is somewhat bricked.
I tried reflashing but same errors every time. (I currently dont have the errors from Odin but I will update my post when I get home)
I can still get to the downloading screen (Yellow triangle with the Android digging) so I am hopeful all is not lost.
So now you have heard my sob story I will ask two questions....
1. Has anyone actually successfully flashed a Japanese model Tab?
2. My only thought/hope at the moment can anyone direct me to an original NTT DoCoMo firmware so I can at least go back to having WIFI only Tab?
Thanks in advance if you can help
Alex

Yes , i suggest you to wait until you get a right firmware for it !
That would probably work if the partitions are a match !
What is this model called btw ?
"NTT DoCoMo Japanese Tab" or there is any model ? such as M180 for korean , P1000 , P100 Sprint , I800 Verizon , etc..
Br
Oz

I am searching the an original NTT DoCoMo firmware.

Electroboy said:
Yes , i suggest you to wait until you get a right firmware for it !
That would probably work if the partitions are a match !
What is this model called btw ?
"NTT DoCoMo Japanese Tab" or there is any model ? such as M180 for korean , P1000 , P100 Sprint , I800 Verizon , etc..
Br
Oz
Click to expand...
Click to collapse
Oz the model is SC-01C it has a build date of 2010/12
I was thinking considering I can get into the build/download screen maybe trying an emergency firmware recovery using Kies.

Hi,
I'm a fellow SC01 owner. You can get a backup of the stock firmware here: http://www.megaupload.com/?d=OJAK2UZF
Firmware code is SC01COMJK2
I believe there are newer firmwares (which I haven't installed as some of them contain a new bootloader that only allows for signed firmwares, same as the international units) that I have seen mentioned on various Japanese blogs. Let me know if you want me to try to hunt any down for you.
As for my SC01, I installed the custom kernel by koxudaxi and it's working great. Mind you, I've only changed to this kernel and apart from that am running the stock OS. I got his kernel here which can overclock to 1.4GHz: http://koxudaxi.sakura.ne.jp/
The kernel I installed via Heindall is zImage_ntt_2. It looks like he's built a newer version though, I might check that out. I think what you might want to do, is in download mode try to restore the above backup to your unit. Look up the Roto Backup thread to see how to do this. Hopefully since you can get download mode, all is not lost. I personally think it's quite crummy that there are different hardware versions like this which aren't interchangeable though >_<

I'm going to give the original firmware a go today at lunch time and I will let you know how I go. Thanks anyways for the link if all goes well I'll look at possibly trying the the koxudaxi kernel.
UPDATE: Well I'm not having luck getting the firmware to flash to my tab I keep getting "Failed to retrieve config Descriptor" when trying to flash. I will keep plugging away.
UPDATE: Still getting the same problems using heimdall to flash the tab. Any suggestions as to what I could do next?

Recovering a Docomo Tab
I'm currently running Overcome v1.1.3 ROM and richardtrip's V15 kernel on my SC-01C.
acont said:
UPDATE: Well I'm not having luck getting the firmware to flash to my tab I keep getting "Failed to retrieve config Descriptor" when trying to flash. I will keep plugging away.
Click to expand...
Click to collapse
You're getting this error from Heimdall, right? Have you tried Odin 1.7?
Here's how I recovered my Tab using Odin:
1. Following the instructions in http://forum.xda-developers.com/showthread.php?t=895827, specify the P1_add_hidden.pit in the PIT button and select Re-Partition.
2. Specify the stock Docomo ROM when pressing the PDA button.
3. Ignore the Phone and CSC buttons, as the stock ROM already contain these items.
You should be able to restore your Tab to stock settings using this procedure.
If this doesn't work, you might want to check if the USB connection to your PC is ok, and if everything necessary to run Odin is installed on your PC.

Bugger!
Well thanks for your help all of you but I think I have just made matters worse.
Last night I had success in flashing the original docomo firmware provided to me by zetsurin but I think I shouldn't have included the boot images.
Unfortunately I think it is completely bricked now it now wont turn on and when plugged into power (thinking that the battery had died) it just comes up with a white screen.
I can't boot into download mode and I can hold down the power button till I turn blue in the face... So as Bones would say "It's dead Jim"
Unless any of you have anything else I could try as a last ditch shot I might just have to ship it back to Japan and get them to fix it or maybe try Samsung here in Oz.
Serves me right
Thanks again.

acont said:
Last night I had success in flashing the original docomo firmware provided to me by zetsurin but I think I shouldn't have included the boot images.
Click to expand...
Click to collapse
What exactly happened?
The SC01COMJK2 firmware does not contain protected bootloaders, by the way.
acont said:
Unfortunately I think it is completely bricked now it now wont turn on and when plugged into power (thinking that the battery had died) it just comes up with a white screen.
Click to expand...
Click to collapse
I've heard about this happening when the battery runs out. Try connecting the Tab to your PC (not your AC adapter) and let it trickle-charge for an hour or so. If successful, you should see the download screen.

fury1sog unfortunately that didnt work
spoke to the samsung repairers here in Aus and they said they can take a look at it for me hopefully bring life back into my unit and then I will never touch it again

Any thoughts?
Hopefully this post is still being looked at but has anyone got any ideas as to what I could do before I fork out $374 to my tab repaired by Samsung Australia?
According to the repair guys its a faulty board (not an idiot that tried to flash it) and needs to be replaced. Not sure if this is worth my trouble considering I could buy a brand new tab for $599.
There is a positive out of this, the MB will be an Australian MB and I will have a working "Australian" tab instead of the Japanese version.
Considering the unfortunate tragedy in Japan I am not sure I should try and get my friend in Japan to fix it for me.
Thoughts anyone?

I know someone who can unlock it, I have mine unlocked by them.
I was afraid of flashing it myself so I paid to have it unlocked, cost was $20.
I think you better go for the MB replacement, it's cheaper.

For what it's worth, I went to reset my tab to factory using a rotohammer backup I made when I first bought it, and got stuck in a boot loop. So I then used ODIN. Still got a boot loop. Then I tried ODIN repartition... it hung for hours. Knowing the thing was likely bricked I pulled the plug and now I am in the situation as you: I have a crappy icon of a phone + an exclamation + computer image. Dead.
I think the best thing I can do for this junk is to toss it unceremoniously in the bin. Fortunately I also have an iPad which has resumed full-time service.
EDIT: Some signs of hope in here: http://forum.xda-developers.com/showthread.php?t=903257
Try "heimdall close-pc-screen" to see if your tab can get kicked back into the boot loop at least. Mine has failed a repartition, but I can still get it into the boot loop, which is a start. Will experiment over the weekend.
EDIT 2: Well my tab is back up and runing. I reflashed my original roto backup using ODIN with repartition on, then I went into recovery and did a factory restore. Back up like stock now. I think I'm going to sell it though, since it's been badly dis-owned by Samsung.

zetsurin said:
Hi,
I'm a fellow SC01 owner. You can get a backup of the stock firmware here: http://www.megaupload.com/?d=OJAK2UZF
Firmware code is SC01COMJK2
I believe there are newer firmwares (which I haven't installed as some of them contain a new bootloader that only allows for signed firmwares, same as the international units) that I have seen mentioned on various Japanese blogs. Let me know if you want me to try to hunt any down for you.
As for my SC01, I installed the custom kernel by koxudaxi and it's working great. Mind you, I've only changed to this kernel and apart from that am running the stock OS. I got his kernel here which can overclock to 1.4GHz: http://koxudaxi.sakura.ne.jp/
The kernel I installed via Heindall is zImage_ntt_2. It looks like he's built a newer version though, I might check that out. I think what you might want to do, is in download mode try to restore the above backup to your unit. Look up the Roto Backup thread to see how to do this. Hopefully since you can get download mode, all is not lost. I personally think it's quite crummy that there are different hardware versions like this which aren't interchangeable though >_<
Click to expand...
Click to collapse
hi zetsurin!
thanks for teaching me how to unlock the tab.
problem now is, im not able to successfully flash any rom. keeps saying write fail, using odin.
stuck at docomo logo when rebooted.
need help.

also used heimdall. starts downloading. but stuck almost at the end of the tab's progress bar.
argh...

me too ! samsung galaxy tab m180 Korean .... huhu

What ROM is best for a SC-01C?
Hi Guys
I picked up a 2nd hand SC-01C from Yahoo Auction, and am wondering what the best ROM to use with it is...
Looks like this guy has got an Overcome ROM on it OK, (http://chaki-ramone.blogspot.com/2011/06/galaxytabsc-01cgingerbreadromovercome.html), so I wonder if the latest version (http://forum.xda-developers.com/showthread.php?t=1205990) will work OK - anyone tried? (is the SC-01C a GSM-based model??)
I'm not going to use a SIM with it, so I'm not bothered about unlocking - but just want it rooted & want a good balance between speed & battery life. If you were going from scratch with an SC-01C, what would you do? Any suggestions greatfully received!
Thanks in advance?
PS - I'm an iPhone / iPad / Ideos 8150 / Notion Ink Adam owner, all jailbroken / rooted. So I'm not scared about rooting per-se, just worried about trying something that will not work because of anything docomo has done to the Tab!

Acont you could be coma bricked try pluginging it into THE MAINS for at least 4 hours if nothing come up your hard bricked.
Sent from my GT-P1000 using XDA Premium App

zetsurin said:
For what it's worth, I went to reset my tab to factory using a rotohammer backup I made when I first bought it, and got stuck in a boot loop. So I then used ODIN. Still got a boot loop. Then I tried ODIN repartition... it hung for hours. Knowing the thing was likely bricked I pulled the plug and now I am in the situation as you: I have a crappy icon of a phone + an exclamation + computer image. Dead.
I think the best thing I can do for this junk is to toss it unceremoniously in the bin. Fortunately I also have an iPad which has resumed full-time service.
EDIT: Some signs of hope in here: http://forum.xda-developers.com/showthread.php?t=903257
Try "heimdall close-pc-screen" to see if your tab can get kicked back into the boot loop at least. Mine has failed a repartition, but I can still get it into the boot loop, which is a start. Will experiment over the weekend.
EDIT 2: Well my tab is back up and runing. I reflashed my original roto backup using ODIN with repartition on, then I went into recovery and did a factory restore. Back up like stock now. I think I'm going to sell it though, since it's been badly dis-owned by Samsung.
Click to expand...
Click to collapse
Can anyone pls help,, my galaxy tab 7inch gt-p1000r is stuck on phone+pc logo, can't go to download mode, can't go to recovery mode,, can't do anything,, pls someone help me,, I am desperate..

huylang280285 said:
me too ! samsung galaxy tab m180 Korean .... huhu
Click to expand...
Click to collapse
unbricking M180 is done long time ago
Here is a video for you
http://www.ort-jtag.com/blog/?e=15
udhtari said:
Can anyone pls help,, my galaxy tab 7inch gt-p1000r is stuck on phone+pc logo, can't go to download mode, can't go to recovery mode,, can't do anything,, pls someone help me,, I am desperate..
Click to expand...
Click to collapse
What about this P1000R , what is special or different ?
I know P1000L was for south american edition !
lemmy_0 said:
hi zetsurin!
thanks for teaching me how to unlock the tab.
problem now is, im not able to successfully flash any rom. keeps saying write fail, using odin.
stuck at docomo logo when rebooted.
need help.
Click to expand...
Click to collapse
Docomo solution is very soon !
That TAB need JTAGging thats the only way ..
I have the good and dead device in hand , we will release for ORT-JTAG probably this week ..
Best Regards
Oz.

[Q] galaxy tab dead

hi i loaded froyo (i9000ugjl2) on galaxy tab, but now it doesent come on. the flashlight at the back stays on and flashes sometime. wot do i do?

We need WAY WAY more information than that to provide assistance. Lets start with:
Tab Version (Wi-fi, GSM, CDMA)
Carrier
What you did/how you got to this point. PRECISELY, and step by step.

ok i have the tab p1000 cdma. i loaded t-mobile via odin on saterday, but that was not my default rom. i googled froyo and found ( I9000M_JL2_JL2_JL2_JL2_UG_BMC ) file and it said froyo download.
after loading it with odin (pda) the tab switched off and the flash stayed on.

If I'm not mistaken, I9000M_JL2_JL2_JL2_JL2_UG_BMC is for Galaxy S, not Galaxy Tab. loading this ROM into Galaxy Tab can damage the device's board physically.

Not to mention the t-mobile ROM is GSM, and you have a CDMA device.
You bricked it, twice.
*edit* Pretty sure you wont get any 3 button combination to work, but in the off chance, try putting it into download mode... If it goes, you have a chance... If you can't get it into download mode, it's toast.

ok it looks like i can go into download mode cuz if i conect to odin and start it dosent but if i hold volume down and power it seems to work i dont think i have the right software to laod to the tab.

braam2000 said:
ok i have the tab p1000 cdma. i loaded t-mobile via odin on saterday, but that was not my default rom. i googled froyo and found ( I9000M_JL2_JL2_JL2_JL2_UG_BMC ) file and it said froyo download.
after loading it with odin (pda) the tab switched off and the flash stayed on.
Click to expand...
Click to collapse
PEBCAK!!!!

TheATHEiST said:
PEBCAK!!!!
Click to expand...
Click to collapse
... And you seriously chastise others for making useless and random comments in threads?! Wow dude, get a friggin' life. He even posted in the correct section and you ... I can't even begin to tell you how hypocritical and ignorant you must be.
braam2000 said:
ok it looks like i can go into download mode cuz if i conect to odin and start it dosent but if i hold volume down and power it seems to work i dont think i have the right software to laod to the tab.
Click to expand...
Click to collapse
You need to reflash back to stock, I'm a GSM device owner and know very little about CDMA tabs, but if you do a search in the development forums for "CDMA Stock" or something similar you should find what you are looking for.
If you can access download mode, I don't believe it's beyond repair... Just do your research on this forum before flashing anything else, and always do it before flashing a device for the first time. Search is your friend.

braam2000 said:
ok i have the tab p1000 cdma. i loaded t-mobile via odin on saterday, but that was not my default rom. i googled froyo and found ( I9000M_JL2_JL2_JL2_JL2_UG_BMC ) file and it said froyo download.
after loading it with odin (pda) the tab switched off and the flash stayed on.
Click to expand...
Click to collapse
First thing's first, don't keep on trying to do something until you are sure of it. It might drain your battery.

hi guys
ja i have given up on this tab. i downloaded (P1000ZHKC2_P1000ZHKC1_P1000ZZHKC1_HOME) and loaded it on tab. it loads then reboots but still no luck.
the flash still stays on ......... im gona c if i can do a insurance claim then get the tab 10inch. unless some1 can come up with a way on how to do a hardware reset. (formate via hardware)

[Q] Need help - My Galaxy Tab SPH-P100 Bricked

​
I have tried installing EA24 stock (http://forum.xda-developers.com/showthread.php?t=1133053) but still Freeze when booting. The error message shown on the picture. I am clueless and need your help.

gtabspring said:
​
I have tried installing EA24 stock (http://forum.xda-developers.com/showthread.php?t=1133053) but still Freeze when booting. The error message shown on the picture. I am clueless and need your help.
Click to expand...
Click to collapse
I had a more complicated version of this. couldn't format, couldn't mount, nothing. My tab showed this, I tried flashing several different kernels/roms/cwm, everything, nothing. Actually made it worse. It got to a point where when I powered on, I only got the backlit softkeys. A few times I got a weird image I've never seen before. Something about bad or unknown upload mode (with a little droid in teh corner....should have taken a picture). And finally I would get nothing; HOWEVER, if I plugged my tab into my laptop and gave it a few seconds, ODIN would see it. I could try flashing a kernel, but it would never process, just hang at the first step so....
with the tab plugged into the laptop and ODIN showing a connection, I would hold VOL DOWN + POWER until I see it disconnect (this is evident of a power down since I have no lights to indicate that). Once it disconnects (yellow box disappears) you can let go of POWER but do NOT release VOL DOWN. It will reconnect shortly thereafter. You are now in Download mode (whether or not you actually see anything on the tablet. You can test this theory by flashing something. What fixed it for me? I downloaded firmware from samfirmware.com. Specifically I downloaded JJ7 v2.2 (full file name I used was P1000XWJJ7.rar) I think what made the difference was using all 3 files. I did not use a PIT file, I put P1000XWJJ7-REV03-ALL-CL669843.tar.md5 in the PDA box, MODEM_P1000XXJK5_REV_00_CL690077.tar.md5 for Phone, and GT-P1000-CSC-MULTI-OXXJK2.tar.md5 in CSC. I did NOT check repartition. Now, this was after I had tried several things like flashing PIT by itself, different stock kernels, full ROMs, etc.... This was the final step I took. Now I'm back to normal.
I'd be interested to see if this solves anyone else's problem. I am so thrilled that I just fixed my "bricked" tab (no power, no response, no apparent charging even) that I'm hoping my time and effort can help someone else.
Let us know what happens. I am actually scouring the forums now because I know at least 2 others were having similar problems as I and maybe this will help them as well.
BTW, I did lose EVERYTHING on the internal SD, including all my backups. Thankfully I always made backups to External
P.S. I should mention it is an AT&T (GSM) Tab.

swedishcancerboi said:
I had a more complicated version of this. couldn't format, couldn't mount, nothing. My tab showed this, I tried flashing several different kernels/roms/cwm, everything, nothing. Actually made it worse. It got to a point where when I powered on, I only got the backlit softkeys. A few times I got a weird image I've never seen before. Something about bad or unknown upload mode (with a little droid in teh corner....should have taken a picture). And finally I would get nothing; HOWEVER, if I plugged my tab into my laptop and gave it a few seconds, ODIN would see it. I could try flashing a kernel, but it would never process, just hang at the first step so....
with the tab plugged into the laptop and ODIN showing a connection, I would hold VOL DOWN + POWER until I see it disconnect (this is evident of a power down since I have no lights to indicate that). Once it disconnects (yellow box disappears) you can let go of POWER but do NOT release VOL DOWN. It will reconnect shortly thereafter. You are now in Download mode (whether or not you actually see anything on the tablet. You can test this theory by flashing something. What fixed it for me? I downloaded firmware from samfirmware.com. Specifically I downloaded JJ7 v2.2 (full file name I used was P1000XWJJ7.rar) I think what made the difference was using all 3 files. I did not use a PIT file, I put P1000XWJJ7-REV03-ALL-CL669843.tar.md5 in the PDA box, MODEM_P1000XXJK5_REV_00_CL690077.tar.md5 for Phone, and GT-P1000-CSC-MULTI-OXXJK2.tar.md5 in CSC. I did NOT check repartition. Now, this was after I had tried several things like flashing PIT by itself, different stock kernels, full ROMs, etc.... This was the final step I took. Now I'm back to normal.
I'd be interested to see if this solves anyone else's problem. I am so thrilled that I just fixed my "bricked" tab (no power, no response, no apparent charging even) that I'm hoping my time and effort can help someone else.
Let us know what happens. I am actually scouring the forums now because I know at least 2 others were having similar problems as I and maybe this will help them as well.
BTW, I did lose EVERYTHING on the internal SD, including all my backups. Thankfully I always made backups to External
P.S. I should mention it is an AT&T (GSM) Tab.
Click to expand...
Click to collapse
Thanks for the suggestion. I think your version of galaxy tab is different with mine and I am not sure that it will work. I am really desparate for solution. This disaster started when the tab's battery is low and suddenly off and when it's charged and turned on it bricked

Point being, tabs are tabs. You will need to use the same procedure, but a different ROM that is designed for your tablet. Go there and find a ROM. There is a thread about unbricking your tablet, I think in the Android Development section that should have a link to samfirmware.com and may provide you with a ROM version that should work. something that may help: plug your tab into the charger at least overnight. I used the stock charger and cable and charged it for 12 hours or so. I did not get any indication that it was charging since the screen and softkeys would not respond, but it did charge.
Of course, I look back and I think you have an indicator, but still a good idea. Try it anyway. Can't make it worse, eh? Mine seemed hardbricked, but it wasn't. I was real close to taking it apart before I found something that works. I believe, IMO, what really fixed it is flashing ROM (PDA), Modem, and CSC files all at once. It could have been something else, but that was the last thing I did before it finally booted.
Go to samfirmware.com, create a free account, and sign in. Then go here (I think your tab is a P1010, correct?) http://www.samfirmware.com/WEBPROTECT-p1010.htm
and Download this:
1010XWKC1 ## MULTI - CSC - OXXKC1 P1WIFI 2.2.1 2011 March DOWNLOAD
(click on DOWNLOAD)
Unzip that file you just downloaded
Start ODIN
Hold VOL DOWN and plug in tab to computer
I believe 3 files should be in the .rar (you can use 7-zip to open, Google it)
the MODEM file goes in Phone.
the CSC file goes in, you guessed it, CSC
last one is PDA.
I think I just rewrote instructions that can be found in the Galaxy Tab Bible. lol. This is what I would do. It worked for me.

Password for P1000XWJJ7.rar
Gentlemen,
I've downloaded both P1000XWJJ7.rar and P1010XWKC1_OXXKC1 to fix my bricked tab, but both require a password to extract the archives. Does anyone know the password? Has anyone had the same issue? I doubt it, otherwise i think it would have been addressed. Any help is appreciated.

I'm having the same problem were you able to fix it?

jairo_pena said:
Gentlemen,
I've downloaded both P1000XWJJ7.rar and P1010XWKC1_OXXKC1 to fix my bricked tab, but both require a password to extract the archives. Does anyone know the password? Has anyone had the same issue? I doubt it, otherwise i think it would have been addressed. Any help is appreciated.
Click to expand...
Click to collapse
try sampro.pl
see if that works.

I too require the passwords to be able to extract these files if someone would be so kind.

Copied straight from SamFirmware.com. It is right at the top of the download page.
try both of these... seems it could be either one of them
## Password is samfirmware.com
# Password is samsung-firmwares.com
Click to expand...
Click to collapse

where can i get these files for the sprint version of the tab i believe the model is p100 I don't see it listed on the recommended website

oxbeast1210 said:
where can i get these files for the sprint version of the tab i believe the model is p100 I don't see it listed on the recommended website
Click to expand...
Click to collapse
do a quick search of the dev thread for EA24 and you should be able to find the original SPH-P100 files. then you can find the EB28 and EF17 updates as well to get all the way to the official GB release.

tried the suggested file still get the error that the OP got in the first screen

oxbeast1210 said:
tried the suggested file still get the error that the OP got in the first screen
Click to expand...
Click to collapse
ok, no one likes a bricked device so let's see what we can do to help you. tell us where you are with your problem. by that i mean what model do you have, what rom were you running, what did you do or try to do that bricked your phone. i'll keep an eye on this thread looking for your response and we'll go from there.

I have the sprint p100 model room was stock rooted gingerbread.
I mailed the Tab to my brother when he got it tab battery was
completely dead and after he charged it and turned it on
he had that error
---------- Post added at 01:30 AM ---------- Previous post was at 01:29 AM ----------
thank you very much for helping me!!

can anyone help?

I have the T-Mobile version of this, but here's a guide and download files to recover your stock ROM. You can follow the entire guide if you want the Overcome ROM as well:
Guide:
http://www.teamovercome.net/p1000/?page_id=17
Downloads:
http://www.teamovercome.net/p1000/?page_id=21
Good luck!
NOTE:
Sprint modem is not listed, but you can fix that later. If you can get it to work with this guide & using the last modem file, we can go from there.

gtabspring said:
​
I have tried installing EA24 stock (http://forum.xda-developers.com/showthread.php?t=1133053) but still Freeze when booting. The error message shown on the picture. I am clueless and need your help.
Click to expand...
Click to collapse
try the one on teamovercome . net I have soft bricked mine but it worked after i followed their instructions there..

Has anyone EVER confirmed that overcome work for non GSM tab, for unbricking and CwM functions?
Sent from my GT-P1000 using XDA