Psneuter exploit is working on IS, but because /system is locked on s-on phones, we can't copy su and superuser.apk into /system, apps required root access can't work.
The following procedure uses psenuter exploit to gain adb shell root, and then copy su (without privilege control ) and busybox into /sbin (which is on rootfs and in the global PATH list) to gain root access for apps.
The procedure:
1. Unzip the attached .zip into a directory (like c:\adb)
2. Open a command prompt and cd to the directory where you extracted the .zip (like cd \adb)
3. run pushroot.bat (simply type pushroot)
4. adb shell /data/local/tmp/getroot
5. adb shell
6. you are now in # prompt. Type /data/local/tmp/pushroot
You have to redo steps 4,5,6 once you reboot your phone.
The procedure will have all apps gaining root access.
!!USE ON YOUR OWN RISK!!
Known working programs: Root explorer, Titanium backup, gscript lite, trasproxy 2.04, ...
Some apps check existence of su in /system/xbin , and reject to proceed if the su binary is not exist (like transproxy 3.08). For this kind of apps, this procedure won't help.
Nice but old news mate...
Sent from my HTC Incredible S using XDA Premium App
Good job...thanks
Thanks for writing this up, might quell the thirst for S-OFF a little longer
/system/ is writeable btw, if you remount it, but after reboot everything u done will be changed to the way it were before.
so a temp root in xbin is possible also, only it will be gone afterwards (atleast i never tried this, but should work also...)
Yes. /system could be remount in rw with root. However, the files you wrote will be gone after you remount ro, and then you won't be able to copy the same filename into the same location again before next reboot ( I don't know why, actually!!). This is why I put su in sbin instead of /system/xbin.
thanks to your files 非常感谢你的工作。
Does anyone know whether steps 4, 5 and 6 can be run from the device itself?
Can I put these commands into some sort of script and run it everytime I need temp root or would I need to do this from a computer every time?
faf said:
Does anyone know whether steps 4, 5 and 6 can be run from the device itself?
Can I put these commands into some sort of script and run it everytime I need temp root or would I need to do this from a computer every time?
Click to expand...
Click to collapse
I believe you can do it from a terminal emulator but haven't got the chance to try it myself though.
Sent from my HTC Incredible S using Tapatalk
pushroot error
c:/adb>adb shell ln /data/local/tem/busybox /data/local/tmp/cp
Link failed File exists
and
c:/adb>adb shell /data/local/tmp/getroot
mmap<> failed. operation not permitted
Why??THX....
itandy said:
I believe you can do it from a terminal emulator but haven't got the chance to try it myself though.
Sent from my HTC Incredible S using Tapatalk
Click to expand...
Click to collapse
Definitely, this is the way to go.
Unfortunately, the root exploit I know could run on device itself, including
rageagainstthecage (ratc) and local root exploit (hotplug) both failed on IS.
The solution will be nearly perfect if we can get temp root on IS without a computer link.
Any input will be welcome.
sky1212 said:
pushroot error
c:/adb>adb shell ln /data/local/tem/busybox /data/local/tmp/cp
Link failed File exists
and
c:/adb>adb shell /data/local/tmp/getroot
mmap<> failed. operation not permitted
Why??THX....
Click to expand...
Click to collapse
Please then type adb shell.
If you see # but not $, do
cd /data/local/tmp
rm ./cp
ln busybox cp
./pushroot
Then you finished the install.
If you see $, please do all over again.
You can also add ShootMe (screen capture app) and SetCPU to the list of working apps. SetCPU will only allow you underclock for now due to the kernel, but it is a nice touch if you are worried about battery life. Adfree doesn't appear to work
l0st.prophet said:
You can also add ShootMe (screen capture app) and SetCPU to the list of working apps. SetCPU will only allow you underclock for now due to the kernel, but it is a nice touch if you are worried about battery life. Adfree doesn't appear to work
Click to expand...
Click to collapse
Adfree is working for me. Are you getting some type of error message?
MetaMorph, screenshot and MyBackup Root are also working.
I had to mount system, then push su to /system/xbin. Then install BusyBox Installer from Market.
No erro, still got the ads. I've tried rebooting & rerooting, still no luck
l0st.prophet said:
No erro, still got the ads. I've tried rebooting & rerooting, still no luck
Click to expand...
Click to collapse
What site/app are you going to so I can see if I get the ads.
the anti-ads actually tries to modify the current host file... which is not allowed in your state as far as i know
what you can do is replace it by pushin it to the right spot
but after reboot gone,but sure u know
Adfee is working for me, you can also add Droidwall.
@eddycyf, did you test adfree with apps? Since it aint working for prophet...
Sent from my HTC Incredible S using XDA Premium App
Mhm AdFree isnt working for me. The App states that everything is okay, and that my hosts file is up to date, but I see ads everywhere.
But I am kinda happy now, because i can use Titanium Backup
Related
This was created when we didn't have S-OFF yet.
If you have S-OFF or /system overlay script you won't need to go through all the steps simply download adfree android.
I know most of you will be able to do this. But I believe that it might not be as easy for the beginners. So here is a little walk through.
!NEEDs ROOT!
1. Download Adfree Android
2. Wait for it to determine local hosts then click on download and install hosts.
Now it will try to replace /system/etc/hosts but fail (it should reboot the phone but it didn't reboot mine)
4. go to adb and reboot your phone into recovery (with power on+volume down OR the command: "adb reboot recovery")
5. Open up the recovery-windows (start recovery-windows (make sure your in the right directory))
6. mount your system and sdcard you might be able to just use mount and mount everything but I've mounted them serperatly.
Here's how: "adb shell mount /system" next "adb shell mount /sdcard"
7. Now we're going to put it in the etc directory where it should be: "adb shell cp /sdcard/hosts /system/etc"
8. reboot the phone ("adb reboot")
That should remove most of the adds.
I know it's explained on a really low level of knowledge but I wanted to make it accessible for all of you.
Only the needed codes:
Code:
1. adb reboot recovery
2. start recovery-windows
3. adb shell mount /system
4. adb shell mount /sdcard
5. adb shell cp /sdcard/hosts /system/etc
6. adb reboot
has it the option to only block browser ads? when I tried it time ago it couldn't. I don't like to block the app ads
No it removes the adds everywhere. It simply blocks the links to adds. it doesn't actually remove them. they are still being called but they just don't show up.
Hi,
I have this very same problem for a long time now, with the constant reboots etc.
Followed your steps, but after the reboot, as soon as I press the button to update the hostfile, it reboots my phone
Thanks anyway...
PirateNL said:
Hi,
I have this very same problem for a long time now, with the constant reboots etc.
Followed your steps, but after the reboot, as soon as I press the button to update the hostfile, it reboots my phone
Thanks anyway...
Click to expand...
Click to collapse
Do you have root access?
Have you checked if the hosts file is at the root of your SD?
A good guide, if a little misplaced, but another option is the /system overlay.
JonasDroid said:
Do you have root access?
Have you checked if the hosts file is at the root of your SD?
Click to expand...
Click to collapse
Yes and yes
where is the most recent hosts file? I'm using a vibrant and it says it worked, but of course, it doesn't. And it doesn't copy the hosts file to my sdcard either ? odd
Hello ,
Finally I got Adfree working
Ok it's not perfect because app continue to reboot the phone after updating the hosts file ,
and we need to copy it manually in recovery mode but it better than nothing
Thank you very much JonasDroid for this little How to .
PS:
For me step 5
JonasDroid said:
Code:
5. adb cp /sdcard/hosts /system/etc
Click to expand...
Click to collapse
was
Code:
adb shell cp /sdcard/hosts /system/etc
Bye.
Yeah indeed its adb shell cp thx for letting me know
Sent from my Legend using XDA App
Can you link me the apk of adfree? I can't download the app from my phone
BTW it's 'ADs" single d
short for advertisment (notice the single d?)
Fixed that English is not my main language
Sent from my Legend using XDA App
JonasDroid said:
5. Open up the recovery-windows (start recovery-windows (make sure your in the right directory))
Click to expand...
Click to collapse
Can't get "start recovery-windows" to work. What is the "right directory"?
Things seems to have worked for me without that portion. Many thanks, I will now change my review in the market for that app from one star to three stars. If they include a note describing this problem upfront I may bump it up further.
It could simply be called start recovery (depending on where you got your rooting tools)(if you've got the from The Unlockr you'll need the -windows)
If you have S-OFF or if you use an /system overlay script these steps aren't needed. (It was created when we didn't have S-OFF for our legends yet.)
Anyone having problems with adfree scripts on Legend since Froyo update? Neve had a problem witha rooted 2.1, but have lots of problems since rooted Froyo 2.2
It seems HTC may have some service which is checking for modifications to symlinks etc.
When I run adfree in my S-off CM7, i get an java.io.EOFException.
Someone else having this?
I had some problems at first, but reinstalling adfree android from market seemed to help. No problem now with CM7 (01/03 from ali ba) and s-off.
adfree no block ads!
Hi,
i install the adfree on my legend with 2.2 with sense.
i did download the host from the app all work ok got a message say it was success install and need to restart the phone.
i did it but still get all the ad like before on all apps.
pls help!
Have you followed the steps? (explained in first post)
Note that you should have a rooted legend (if you don't know what that is then you don't have one)
I feel like a noob right now but it wont install on my xoom. what the f? it says im rooted, as i know i am. i cannot get it to install. says im either not nand unlocked yada yada defaut message. help! i really want to get ubuntu on this beast lol.
edit: n/m i got it. delete this post lol
idkwhothatis123 said:
edit: n/m i got it. delete this post lol
Click to expand...
Click to collapse
Ok, how?! I remounted /system as r/w but still got same error....busybox installer also running as su...have no idea how to get this to install...
quordandis said:
Ok, how?! I remounted /system as r/w but still got same error....busybox installer also running as su...have no idea how to get this to install...
Click to expand...
Click to collapse
Unzip this file on your computer. instructions are inside. you can read them with notepad or notepad++ (what i use) Works just fine. the app will not work, its annoying.
Instructions in file lose their line breaks when viewed in notepad. here it is with line breaks for those who don't speak linux well enough to figure it out otherwise:
adb remount
adb push busybox /system/xbin
adb shell
#once you're in an adb shell do this
cd /system/xbin/
chmod 755 busybox
./busybox --install -s /system/xbin/
However, after doing so Titanium still thinks it can't get root, even though it is listed in superuser, as allowed so I'm not sure this is going to get me there. I must have some other issue at hand.
i got the ota without relocking, maybe the ota relocked or unrooted? (scratches head.)
What I found is when I tried to install busybox from market I get the same error about it not installing. But i pulled up my terminal and su, tried a cp and I got the busybox 1.18.3 usage list.
So even though it errors out it looks like it still installs busybox, at least it did in my case.
The app still shows busybox not install
Originally posted by Stetsonaw at androidforums...
Please be aware that I did not write these instructions. I only posted them. Stetsonaw wrote these instructions. While comfortable in ADB and have rooted my phone many times in testing as well as rolled back the versions etc... I have no more insight into how or why it is not working for you. If you followed the directions exactly on a version 4 phone, this should work no problem.
Haxcid
Links to the necessary files are listed at the bottom.
Remember, I am not at fault if you brick your phone, now, proceed.
Connect your phone in charge only mode to install the LG Bootstrapper and drivers, or grab the LG Universal Drivers.
Change your USB Mode to Internet Connection
Go into Settings/Applications/Development and ensure USB Debugging is turned on
If all goes according to plan, you should see the ADB Ladybug icon in your notification bar
I updated the Rootzwiki page with the same info found below.
Busybox actually comes installed by LG on the Revo, how awesome is that??
Download the rageagainstthecage binary
Download the SU binary
Move these files to the same directory your adb.exe is in.
Code:
The > and # characters below illustrate the prompt
you should have, if you have the $ when you go into adb shell,
exit out and type 'adb usb' then go back into adb shell and
you should see the #
Open Command prompt (either use the Windows Key+R and type cmd or start/run, then type cmd)
32-bit users: >cd c:\program files\android\android-sdk\platform-tools
64-bit users: >cd c:\program files (x86)\android\android-sdk\platform-tools
Or >cd (whatever directory adb is in)
>adb devices (verifies you are connected)
>adb push rageagainstthecage-arm5.bin /data/local/temp/rage
(if the above command fails due to read-only, type 'adb usb' then 'adb root' to validate root status, then 'adb devices' again to verify connection)
>adb push su /data/local/temp/su
>adb shell chmod 777 /data/local/temp/rage
>adb shell ./data/local/temp/rage
>adb shell (If this gives you a $ prompt instead of a # prompt, type 'su', if that fails, 'exit', 'adb usb' like above.)
#mount -o remount,rw -t ext3 /dev/mmcblk0p12 /system
#busybox cp /data/local/temp/su /system/bin/su
#chmod 6755 /system/bin/su
Verify the file is in place w/correct permissions
#cd /system/bin
#ls -l *su
After the ls command you should see the following returned by the system:
-rwsr-sr-x root root 26248 2011-05-29 01:09 su
At this point, you may way to remove the files you put in /data/local/temp (optional):
#rm /data/local/temp/su
#rm /data/local/temp/rage
continue with commands
#reboot
Download and install SuperUser from the Market
Thanks Zennmaster, _mrbirdman_ for finding the linux routes and birdman for helping me out, and droidx8971 for helping me find all the information possible!
http://wikifilez.com/Root Files/revolution/rageagainstthecage-arm5.bin
http://wikifilez.com/Root Files/revolution/su
https://market.android.com/details?id=com.noshufou.android.su&feature=search_result
http://www.lg.com/us/support/mc-support/drivers/LGAndroidDriver_Ver_1.0_All.exe
Just a note for some. The rageagainstthecage bin file may be detected as a virus/trojan. It is not. You may want to disable your antivirus before downloading the .bin file.
I run avira on my desktop and it caught the file as a virus everytime I downloaded it and then deleted it. Avast on my laptop however did not.
Root is simple if you follow the instructions. You need to make sure that adb recognizes your device. Takes 5 minutes to complete, took me longer to install adb again and update it.
Any reason to not use the one click method? Seems to be working
bwhxeon said:
Any reason to not use the one click method? Seems to be working
Click to expand...
Click to collapse
No idea. I have not used the one click. Create a thread for it. I posted what I know which is adb.
Successfully Rooted
with RootzWiki instructions for Windows, needed the remount and busybox lines to overcome the permission denied when pushing su.
Hey guys, either using S1C or ADB Commands, have we found out if it's possible to unroot this as long as you Nand Backup the stock rom then unroot from there yet? Just because I got this phone as a filler/4g unl. lock and got buyback on it from best buy so I could buy a dual/quad later on when they come out .
MXFrodo195 said:
Hey guys, either using S1C or ADB Commands, have we found out if it's possible to unroot this as long as you Nand Backup the stock rom then unroot from there yet? Just because I got this phone as a filler/4g unl. lock and got buyback on it from best buy so I could buy a dual/quad later on when they come out .
Click to expand...
Click to collapse
Doing a factory reset I believe will unroot you. There is no nand back up at this time. We are waiting for a recovery mod.
Haxcid said:
Doing a factory reset I believe will unroot you. There is no nand back up at this time. We are waiting for a recovery mod.
Click to expand...
Click to collapse
Oh ya I know, I just always keep a stock one, on the Inc if you factory reset from an AOSP rom, you'd bootloop, so you had to make sure you were on a Sense 1.0 or stock rom(from my experience), so I was just making sure it was no big deal to go back.
Any idea when we will have cw on this?
Haxcid said:
Doing a factory reset I believe will unroot you. There is no nand back up at this time. We are waiting for a recovery mod.
Click to expand...
Click to collapse
I tried the factory reset. I am still rooted.
navycow said:
I tried the factory reset. I am still rooted.
Click to expand...
Click to collapse
That's what i figured. Can anyone verify if you remove SU and Rage through adb will it unroot?
Sent from my VS910 4G using XDA Premium App
MXFrodo195 said:
That's what i figured. Can anyone verify if you remove SU and Rage through adb will it unroot?
Sent from my VS910 4G using XDA Premium App
Click to expand...
Click to collapse
If you have to return your device, simply remove the superuser app, after you unfreeze anything you may have frozen then factory reset. They honestly will never know it was rooted. The only way now that you can really tell is the super user app from market.
Just so everyone knows. SuperOneClick can root and unroot this phone ok.
navycow said:
Just so everyone knows. SuperOneClick can root and unroot this phone ok.
Click to expand...
Click to collapse
Thank you for confirming this. My revolution just came in the mail today!
Thanks for posting this here for me Haxcid!
Sent from 1885
navycow said:
Just so everyone knows. SuperOneClick can root and unroot this phone ok.
Click to expand...
Click to collapse
Cool thanks for checking. Any benefits for ADB over S1C? Can't wait to finally root and freeze half these apps. I think we need a few more twitters to praise koush for a recovery on this beast.
Sent from my VS910 4G using XDA Premium App
Is there recovery for this now? Did I miss something?
stetsonaw said:
Is there recovery for this now? Did I miss something?
Click to expand...
Click to collapse
No No, I was saying we need to praise Koush's good work so he will make one faster .
And Stetsonaw, any idea if I root through ADB, can I unroot with S1C, since it uses the same idea.
S1C for whatever reason will not run(tried three computers, a XP, Vista, and Win7 lol), it keeps freezing at the same spot, everytime.
Should be able to, since S1C does what the ADB method does... or you could just delete the 'su' file out of /system/bin and /system/xbin (if it's there) to unroot.
EDIT: I couldn't get S1C to open on my desktop, and my laptop, which would open the program, would bluescreen when i connected the phone, so i had no choice but to do it the ADB way.
stetsonaw said:
Should be able to, since S1C does what the ADB method does... or you could just delete the 'su' file out of /system/bin and /system/xbin (if it's there) to unroot.
EDIT: I couldn't get S1C to open on my desktop, and my laptop, which would open the program, would bluescreen when i connected the phone, so i had no choice but to do it the ADB way.
Click to expand...
Click to collapse
Hmmm, ya now my computer for whatever reason won't open up ADB through command. This is getting irritating lol. Should be nice and simple, but it just won't go through. If I downloaded the SDK Manager like 4 months ago, it shouldn't matter, correct?
make sure you change directory to wherever your adb.exe is located... as in:
Code:
cd C:\Program Files\Android\android-sdk-windows\platform-tools
One click root after update: "We have root, but couldn't push busybox. Not sure why!"
I just updated .890 which seemed to go fine with no errors (unfroze all bloat, but did not unroot), but I lost root, as expected.. but when I use Pete's one-click root tool (latest version), it gets to step 3 and gives me the error about not being able to push busybox...!? It says I "have root", but none of my apps recognize it.. I've pulled the battery, rebooted and retried like 10 times... still can't get it to re-root. I've made sure Debugging and Unknown Sources is enabled and tried in Charge Mode and Mass Storage mode... Am I going to have to stock flash this thing and re-update & re-root?
I THINK I have some type of root.. maybe... because Root Explorer will let me mount the System directory as R/W and I can TRY to manipulate files, but if I delete something (like su), it appears to delete successfully, but the file comes back if I refresh the directory.. but I also noticed when I go into the System directory, Root Explorer claims I only have 1MB of free space out of 318.00MB... how did that happen? If I try to run Superuser.apk, it force closes on me.
Any help or ideas are greatly appreciated...
there's an app on the android market that will push busybox if you have root. I'd look into that
edit: have you attempted to run the one-click root again? and if that doesn't work you can try to use the adb method if you're comfortable with it. And make sure that all of your drivers and everything are up-to-date
I have done battery pulls and like a dozen+ re-tries at the 1-click root, always get the same error.. I have been into the ADB shell to try and figure this out and I see the ADB Shell starts out by giving me a # prompt... that means writable/root, right? Any instructions on what I have to do from there?
I will look into that push busybox app, thanks.
http://wiki.rootzwiki.com/index.php/Motorola_Droid_3
This is where all the info about the adb and one-click stuff. The tough part about the adb method is manually pushing su to the (i think) system/xbin folder. Then i just used the app on the marketplace to push busybox. But there's a download link for both of those on the website
Thanks for the links. I think a problem with my ADB is when I reboot it (step 3), I no longer have a # prompt.. it goes back to the $ prompt... the only way I can seem to get the # prompt in ADB is when I use Pete's temporary ADB root... but once I reboot, that goes away. When I try to do step 4, rm /data/local/12m, it says it's a directory and it's not empty and it won't remove it. :\
How do I normally make ADB give me that # prompt so I can write/edit? or am I totally off-base here?..
*edit* I am going to try and do Pete's temp ADB root again and just try steps 18+ and see if that gets me anywhere...
Kraxis said:
Thanks for the links. I think a problem with my ADB is when I reboot it (step 3), I no longer have a # prompt.. it goes back to the $ prompt... the only way I can seem to get the # prompt in ADB is when I use Pete's temporary ADB root... but once I reboot, that goes away. When I try to do step 4, rm /data/local/12m, it says it's a directory and it's not empty and it won't remove it. :\
How do I normally make ADB give me that # prompt so I can write/edit? or am I totally off-base here?..
*edit* I am going to try and do Pete's temp ADB root again and just try steps 18+ and see if that gets me anywhere...
Click to expand...
Click to collapse
After temp ADB root, steps 18 and beyond should do it. You may want to check /system/bin and /system/xbin to remove the old su binaries before pushing the new one. Some folks have one in each location for some reason. Put it in xbin, but if it doesn't work, /system/bin will. Superuser wouldn't recognize xbin for me so I moved it to /system/bin and i'm good since.
Anyone have a thought on the xbin not always working? I think this is the 3rd topic i've seen with this issue, not including myself.
Sent from my DROID3 using XDA App
OK, I got root back! I used steps 18+ for "ADB Method" (after using Pete's temp ADB root) and essentially replaced SU and Superuser.apk, CHMOD'd it rebooted and I had root! Thanks guys!!
Hello there, I just rooted my Z3C 5803 phone with the exploit founded yesterday (.93 FW) and first thing I did was to install Titanium Backup because there were a lot of programs I wanted to remove for good from this device and also wanted to integrate newer versions into the Rom. Whenever I try to integrate, for example, a newer YouTube, Google Chrome, Google Play Store version into the Rom, TB seems to keep trying and trying forever.
Checking into the TB FAQ i found this:
"14. I tried to integrate system app updates or to convert user apps to system apps but it didn’t work. Why?
These features require a NAND unlocked ("S-OFF") device, in order to write to the ROM.
Depending on the software, some S-ON devices may "remember" modifications made to /system for a while, or until the next reboot. That is not enough for our purpose.
Please search the Internet for information on how to make your particular device S-OFF."
.......but, of course, for me that is Chinese. Doesn´t mean that if I´m root, I can anything I want to the Rom? If not, what do I need to make the phone S-OFF?
Hope someone could help this noob!
Thanks in advance.
Alx
http://forum.xda-developers.com/z3-compact/general/questions-belong-t2868300
Sorry, didnt know that. Will create it in that section.
Use link2sd, be careful
harrymason37 said:
Use link2sd, be careful
Click to expand...
Click to collapse
Would link2sd let me remove and integrate apps from/to the ROM of my cellphone?
S-OFF and S-ON are terms used for HTC phones if i'm not mistaken
Sent from my D5833 using XDA Free mobile app
alxtorrentazos said:
Would link2sd let me remove and integrate apps from/to the ROM of my cellphone?
Click to expand...
Click to collapse
yes, you can remove system app or convert user app into system app just make make sure you grant its superuser request
harrymason37 said:
yes, you can remove system app or convert user app into system app just make make sure you grant its superuser request
Click to expand...
Click to collapse
Thanks Harry . Never used that app before, will have to read a guide about how to do that. I always used TB for that in my old Samsung Xcover 2 phone with Jelly Bean.
alxtorrentazos said:
Hello there, I just rooted my Z3C 5803 phone with the exploit founded yesterday (.93 FW) and first thing I did was to install Titanium Backup because there were a lot of programs I wanted to remove for good from this device and also wanted to integrate newer versions into the Rom. Whenever I try to integrate, for example, a newer YouTube, Google Chrome, Google Play Store version into the Rom, TB seems to keep trying and trying forever.
Checking into the TB FAQ i found this:
"14. I tried to integrate system app updates or to convert user apps to system apps but it didn’t work. Why?
These features require a NAND unlocked ("S-OFF") device, in order to write to the ROM.
Depending on the software, some S-ON devices may "remember" modifications made to /system for a while, or until the next reboot. That is not enough for our purpose.
Please search the Internet for information on how to make your particular device S-OFF."
.......but, of course, for me that is Chinese. Doesn´t mean that if I´m root, I can anything I want to the Rom? If not, what do I need to make the phone S-OFF?
Hope someone could help this noob!
Thanks in advance.
Alx
Click to expand...
Click to collapse
hey , go to the the giefroot folder you downloaded to root your phone , then go to ''files'' folder , and then open a ''cmd window'' there (by pressing ctrl + right click) and then write copy paste these codes one after another
adb push systemrw.sh /data/local/tmp
adb push modulecrcpatch /data/local/tmp
adb push wp_mod.ko /data/local/tmp
adb shell
chmod 777 /data/local/tmp/systemrw.sh
chmod 777 /data/local/tmp/modulecrcpatch
chmod 777 /data/local/tmp/wp_mod.ko
su
cd /data/local/tmp
./systemrw.sh
i hope it works , i had same issue and i fixed it
sorry, but I´m getting those "not found" msgs and is still the same....TB gets stuck while trying to integrate the files into the ROM
[email protected]:/data/local/tmp # ./systemrw.sh
./systemrw.sh
modulecrcpatch (by zxz0O0)
module_layout: patched to 0xDB2AB789
__aeabi_unwind_cpp_pr1: match
kallsyms_lookup_name: not found
printk: not found
mem_text_write_kernel_word: not found
__aeabi_unwind_cpp_pr0: match
successfully patched
Installing of mount.sh finished
rm failed for /data/local/tmp/memfile, No such file or directory
255|[email protected]:/data/local/tmp #
alxtorrentazos said:
sorry, but I´m getting those "not found" msgs and is still the same....TB gets stuck while trying to integrate the files into the ROM
[email protected]:/data/local/tmp # ./systemrw.sh
./systemrw.sh
modulecrcpatch (by zxz0O0)
module_layout: patched to 0xDB2AB789
__aeabi_unwind_cpp_pr1: match
kallsyms_lookup_name: not found
printk: not found
mem_text_write_kernel_word: not found
__aeabi_unwind_cpp_pr0: match
successfully patched
Installing of mount.sh finished
rm failed for /data/local/tmp/memfile, No such file or directory
255|[email protected]:/data/local/tmp #
Click to expand...
Click to collapse
I had a similar problem until i installed dualrecovery. Now the rw permission persists after reboot.
xpsg said:
I had a similar problem until i installed dualrecovery. Now the rw permission persists after reboot.
Click to expand...
Click to collapse
But I DO have RW permissions over the system folder..............according to ES File Explorer I have "rwxr-xr-x" and those stay after I reboot my device. I can use ES File Explorer to copy files wherever I want. Root is working just fine, is just TB that cannot integrate stuff onto the ROM (neither remove, I only can freeze apps, but I want to remove them for good).
my TiBu seems to work, theres no errors. But it doesnt actually seem to work. I cant uninstall any system apps. It does the process says complete but the apps remain.
Any Solution?
Thanks
I used this tool to access rw to system http://forum.xda-developers.com/showthread.php?p=57043230
[4.4.4] Sony RIC KILLER
After that you will have write permission to system
Sent from my D5803 using XDA Free mobile app
mardrest said:
I used this tool to access rw to system http://forum.xda-developers.com/showthread.php?p=57043230
[4.4.4] Sony RIC KILLER
After that you will have write permission to system
Sent from my D5803 using XDA Free mobile app
Click to expand...
Click to collapse
I will try that once I'm at home. Weird thing is I tried to copy a file inside the system folder and it worked just fine, so, I do have permissions over the folder..........dont know
This tool dissable the sony ric protection that dissable access to /system
Sent from my D5803 using XDA Free mobile app
pw1nce said:
hey , go to the the giefroot folder you downloaded to root your phone , then go to ''files'' folder , and then open a ''cmd window'' there (by pressing ctrl + right click) and then write copy paste these codes one after another
adb push systemrw.sh /data/local/tmp
adb push modulecrcpatch /data/local/tmp
adb push wp_mod.ko /data/local/tmp
adb shell
chmod 777 /data/local/tmp/systemrw.sh
chmod 777 /data/local/tmp/modulecrcpatch
chmod 777 /data/local/tmp/wp_mod.ko
su
cd /data/local/tmp
./systemrw.sh
i hope it works , i had same issue and i fixed it
Click to expand...
Click to collapse
This fixed my xposed framework issues! Thank you!
Yeah, that fixed the permissions to install Xposed, but that doesnt work to let Titanium Backup modify the files in the rom. MKLCF2, could you please try to integrate, let's say YOUTUBE or GOOGLE PLAY into the rom ?
I'm still at work and cannot test anything
Try
Code:
su
mount -o remount,rw /system
after that you should be able to mess around with Titanium Backup
Thanks for that tip but 2 things still happens.......I'm still unable to integrate YOUTUBE or GOOGLE PLAY newer versions into the rom AND, everytime I reboot the device is like I lose that option and I have to do the entries again on the terminal..........for example, Xposed keeps asking me "are you root?" when I try to install/update it.
Is there any other solution to this?
TIA