Related
I Now have the jf1.5 and for some reason It doesn't come with the amazonmp3 app. I need this, can some please post it so I can download the apk
mimic1011 said:
I Now have the jf1.5 and for some reason It doesn't come with the amazonmp3 app.
Click to expand...
Click to collapse
ADP builds of Android do not have TMobile apps such as Amazon MP3. This has been discussed ad nauseum if you had bothered to search.
mimic1011 said:
I need this, can some please post it so I can download the apk
Click to expand...
Click to collapse
It's a protected app. If you need it that bad that I suggest you go back to an RC build and do research before blindly flashing whatever build of Android is at the top of the forum.
mimic1011 said:
I Now have the jf1.5 and for some reason It doesn't come with the amazonmp3 app. I need this, can some please post it so I can download the apk
Click to expand...
Click to collapse
If you still have the RC firmware you can just unzip it copy the amazon apk out and install it into the adp the amazon works. I dont think anyone has the IM app working though
We should have an official rc update from tmobile real soon, which will have amazon mp3, myfavs, etc...
Just open a RC33 update.zip and extract the file from /system/app. Then you can install it by adb push.
Verified as working. I just added it to the app folder of Dudes 1.1 build and then did the update and it works just great. Purchased and downloaded a song to verify.
Here it Is
http://droiddeveloper.com/com.amazon.mp3.zip
enjoy it works for me...
Really Bad,
In Germany it cannot charge my creditcard... It has enough money on it.
I have the dude's 1.5 version, and cant seem to get it running. It forces closed upon trying to open. Any thought? It is saved to my SD in the app folder.
TIA
Read my guide
http://forum.xda-developers.com/showthread.php?p=3763025
TY SolemnWishing, this is how I got the app on my SD card to begin with - yours is a very helpful thread for a n00b like me. Unfortunately, I was never able to get the app to open. I am not sure how I could have messed it up - pretty simple, I navigate to the app folder on my SD and click the apk file which proceeds to install Amazon MP3. No go.
If you have any ideas on what the problem might be I would appreciate the input.
Thanks again for your great tutorial
Hmm... I assume you deleted the .zip and renamed it to .apk, what firmware are you using?
I am using firmware 1.5. Yes I renamed to apk. I wants to work, just force closes before it fully loads. I also have this problem with oi music player. It used to work, now no longer loads. I wonder if my SD card is the problem. It is 8 gb, but I am sure only like a class 2 card.
Strange. I have JF 1.5 and installed the Amazon app the normal way for any app on the G1 and have rebooted several times. The app still works. I thought if you did not push the app to the G1 it would need to be reinstalled each time you reboot the device?
Well, I am pretty positive it was my SD card - after writing my post this morning I pulled the SD card and have not been anble to get the phone back since. This thread pretty accuratly describes what is going on...long story short, i think I fried my SD card and as a result am stuck on Splash 2. I have wiped several times...
http://forum.xda-developers.com/showthread.php?t=516874
uggg...all for mp3's!!!! any thoughts and lots of luck would be appreciated.
K
Ahh I did the same thing. Here is what you need to do, you will need to force format it. Windows will NOT detect the card, and it may even freeze your computer. Put the phone into another device, such as a palm pilot or another cell phone and format it from there. It shouldn't take very long, and when it is completed, it will likely say the memory card only has 5Kb or so of memory on it. NOW insert the card into your computer and reformat it into a FAT32 format (+Ex2 for apps to SD) and you should be good! Of course, you will need to reload all your files though. That will fix your SD card. As for your phone... you will need to completely reflash a new firmware onto it, as right now starting up your phone is looking for items on your SD card which it may need, which no longer exist.
edit: if that doesn't work, completely start from the beginning by flashing the dreamimg.nbh file for rooting.
I was able to reformat the SD card, lost all my backups of course, and had to reflash dreaming.nbh and start from scratch. No biggy, at least i still have my phone.
thanks for all the tips...once i get my card re-partioned, I will try the Amazon.apk again.
K
I got it to load - thanks for all your help.
K
No problem at all, glad I could help.
Bad day today. Why? Because this morning I decided to try out one of the Eclair roms before leaving for work. I flashed it, tried it and then looked at the time. After noticing that I had only 15 minutes before having to be at work I decided that it was time to lock up my computer and take off... but first... I need to restore back to a stable rom. So I restarted my phone and using switchrom I recieved an error of some kind. Not a big deal because anytime I flash a new rom I do a switchrom -s, bart backup AND nandroid+ext backup. Then everyday I use a bat script to automatically mount my sdcard and back it up to my pc just in case I need to format my card and restore everything later. Which brings me to the point of this thread. I was able to restore CM-4.2.8.1 but it was booting VERY slowly (about 15 minutes) and I noticed that it still said "Checking for errors" in the status bar. I left my phone on the charger and checked it later and it said that my sdcard was damaged. I have absolutely NO computer access and my phone is running WAAAYYYY to sluggish to use. So I just turned it off and put my sim in my old Tilt phone and used that for the day.
So... throughout the ENTIRE day I was going through Android withdrawls. I needed my G1. It was killing me.
So my question/idea is, is there a way to do a chkdsk on the fat partition of from the recovery menu or from terminal? I did a little searching and came up with something called dosfsck. And I looked in the /system/bin/ directory and saw something called fsck_msdos. Can we use this to repair the errors that the system finds on the sdcard? If the OS can scan and detect errors, then why can't we have an option to fix them? Instead of having to use a computer at home or the office.
Any thoughts? Thanks.
Binary100100 said:
I was no longer the Hero.I needed my hero. I needed to be rescued.Times were changing people changed, things got hard for me .
Any thoughts to rescue my savior ???
Click to expand...
Click to collapse
The thing is that is part of the windows OS, i know cause i use it to check for errors on my HDD or SD cards time-time. Im not sure if linux or distro or whatever its called has that feature avail.
Oh and i had that prob before where it was devastatingly sluggish.
Ace42 said:
The thing is that is part of the windows OS, i know cause i use it to check for errors on my HDD or SD cards time-time. Im not sure if linux or distro or whatever its called has that feature avail.
Oh and i had that prob before where it was devastatingly sluggish.
Click to expand...
Click to collapse
Uhhhh... is that a paraphrased version of what I said in the quote? LOL.
Here... I found this: http://linux.die.net/man/8/fsck.vfat
I don't see why it can't be implimented somehow into a recovery.img to avoid future problems. It'll basically be like e2fsck but for fat.
Binary100100 said:
Uhhhh... is that a paraphrased version of what I said in the quote? LOL.
Here... I found this: http://linux.die.net/man/8/fsck.vfat
I don't see why it can't be implimented somehow into a recovery.img to avoid future problems. It'll basically be like e2fsck but for fat.
Click to expand...
Click to collapse
Oops sorry about that, didnt think anyone would notice.
Maybe you should check that up with Amon_RA?
I usually use my SD reader to check for errors before i flash a rom.
Ace42 said:
Oops sorry about that, didnt think anyone would notice.
Maybe you should check that up with Amon_RA?
I usually use my SD reader to check for errors before i flash a rom.
Click to expand...
Click to collapse
Yeah I guess I'll do just that.
I did find this too:
http://www.netmite.com/android/mydroid/donut/external/dosfstools/doc/README.dosfsck
So it looks like someone had the idea already. I wonder why it's never been implemented.
Binary100100 said:
Yeah I guess I'll do just that.
I did find this too:
http://www.netmite.com/android/mydroid/donut/external/dosfstools/doc/README.dosfsck
So it looks like someone had the idea already. I wonder why it's never been implemented.
Click to expand...
Click to collapse
The fat32 probably does get corrupted, sometimes i get the sd isnt inserted error.
Ace42 said:
The fat32 probably does get corrupted, sometimes i get the sd isnt inserted error.
Click to expand...
Click to collapse
I never get that but whatever is wrong with my sdcard it must be major because my pc is still trying to recover it after an hour later.
Binary100100 said:
I never get that but whatever is wrong with my sdcard it must be major because my pc is still trying to recover it after an hour later.
Click to expand...
Click to collapse
Copy the files to your pc, then erase the partition via console.Then do the error check again. I think its having trouble since you have a lot of files on your sd that must be zip or maybe you have a .img
Ace42 said:
Copy the files to your pc, then erase the partition via console.Then do the error check again. I think its having trouble since you have a lot of files on your sd that must be zip or maybe you have a .img
Click to expand...
Click to collapse
I think it was Vista. I never should have used the error check option in the disk properties menu. I just tried it again using dos (chkdsk f: /R) so it actually tells me what it's doing. The error checking tool in vista is just like the defrag tool. You have absolutely no idea what's going on or how much longer it's going to take. Sucks.
Binary100100 said:
I think it was Vista. I never should have used the error check option in the disk properties menu. I just tried it again using dos (chkdsk f: /R) so it actually tells me what it's doing. The error checking tool in vista is just like the defrag tool. You have absolutely no idea what's going on or how much longer it's going to take. Sucks.
Click to expand...
Click to collapse
I upgraded to 7
But i did like vista because of the HW support and eye-candy. I do wonder what its checking while it does that though.
Well we finally have root and as of now some of the apps arnt working for me heres a list of whats working and whats not
SUFBS - the file browsing seems to be fine, tried deleting a system apk and nothing, wouldnt work. Terminal app works but say permission denied for some reason. su enter works fine
Wifi tether- The experimental version arnt working at all something isnt writing, the nexus stable version and connects and no force close but there is no connection. Hope this gets a fix soon
Adfree- fails to replace host error message blank.. tried it again and it rebooted phone.
I have SetCPU but not interested in overclocking. Anybody have anything else working currently??
screen cast works a bit, it shows everything on the screen but it doesnt let me use the computer to explore the phone
http://code.google.com/p/androidscreencast/
root explorer-works
cache mate-works
spareparts-works
adwlauncher/livewallpapers(need to push Livewallpapers.apk and LiveWallpapersPicker.apk)-works
HighRidas said:
root explorer-works
cache mate-works
spareparts-works
adwlauncher/livewallpapers(need to push Livewallpapers.apk and LiveWallpapersPicker.apk)-works
Click to expand...
Click to collapse
Awesome .. cache mate works perfect I was using another cache clearing app that didnt work bc it needed busy box.
AdFree causes a reboot of the phone, and doesn't update host lists.
JHStarner said:
AdFree causes a reboot of the phone, and doesn't update host lists.
Click to expand...
Click to collapse
Yeap I tried putting the host.txt into system/etc which is was it does but right now we have no permission to write to system.
anyone get wifi tether to work with the slidemeroot rom?? or anything new to work on that rom
turboyo said:
Yeap I tried putting the host.txt into system/etc which is was it does but right now we have no permission to write to system.
anyone get wifi tether to work with the slidemeroot rom?? or anything new to work on that rom
Click to expand...
Click to collapse
wifi tether doesn't work yet on the slidemeroot rom. Wes is working on it.
Nothing to add here but I will test any app people are wondering about.
- faylix / local
Eugene's Update-1 "SlideMEROOT2"
*Edit: What does spareparts do? where are you taking it from? I'm really looking foward to compcache and swap again
You can get spare parts from the market but it doesnt need root access. SOme of the newer ROMS, for the G1 atleast, had a spareparts where you could configure swap and cc. I dont know if thats the one he got working.
HighRidas said:
root explorer-works
cache mate-works
spareparts-works
adwlauncher/livewallpapers(need to push Livewallpapers.apk and LiveWallpapersPicker.apk)-works
Click to expand...
Click to collapse
Would you tell me where to push the livewallpapers to?
I also tried the the meltus volume hack and that doesn't appear to increase the volume even after allowing SU. Now as for the live wall papers I installed a couple from the market and they all show up under the adw launcher without me pushing the files through.
-------------------------------------
Sent via the XDA Tapatalk App
userfriendlyme said:
I also tried the the meltus volume hack and that doesn't appear to increase the volume even after allowing SU. Now as for the live wall papers I installed a couple from the market and they all show up under the adw launcher without me pushing the files through.
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
what volume hack version did u use? what ROM did you use?
drocap2 works
swapper appears to work
(using with swap partition of 128 megs)
- faylix / local
We have wifi tether!!
http://code.google.com/p/android-wifi-tether/issues/detail?id=400#c1
http://forum.xda-developers.com/showthread.php?p=6907682#post6907682
Wifi Tether works, but...
Do we know if Wired-Tether works? I haven't rooted yet as I have found a method that works without root on my Ubuntu, but I've been having a hell of a time finding a free, user-friendly method for my wife's windows.
has anyone tried TA Utility?
cacheclear and backup for root users (old) are working
turboyo said:
Awesome .. cache mate works perfect I was using another cache clearing app that didnt work bc it needed busy box.
Click to expand...
Click to collapse
I'm happy to hear that CacheMate works. I have the Slide but have not had any luck rooting it (I still don't believe it can be done ). CacheMate technically requires busybox so I'm not sure why it's working. I don't make direct calls to busybox but I know that it adds some of the some core functionality to apps like mine such as cp and mv. This is why some files managers specifically for root will not work without busybox.
I'm assuming a simpler root method will be available soon enough and ROMs everything else will be made available to get all the root apps working perfectly. If the Slide was mine and not my wife's, I would not have given up on trying to root it. Anyway, glad to hear CacheMate works and people are enjoying it on the Slide.
Chachemate is working for me as well.
AndroidAppCritic - One thing I did to get ADB to see the Slide in Recovery was format the memory card before I did anything. I left it in there the whole time too. That worked on two Slides. Pulling the memory card out before Fastboot saw it then popping it back in right before Recovery came up wouldn't work for me.
That is, of course, if that is the problem you were having.
civicdrivr said:
Chachemate is working for me as well.
AndroidAppCritic - One thing I did to get ADB to see the Slide in Recovery was format the memory card before I did anything. I left it in there the whole time too. That worked on two Slides. Pulling the memory card out before Fastboot saw it then popping it back in right before Recovery came up wouldn't work for me.
That is, of course, if that is the problem you were having.
Click to expand...
Click to collapse
I know it's off topic but believe me when I tell you that I've tried every possible suggestion. I own dozens of SD cards from 2GB class 2 to 16GB class 6 in every imaginable brand. I even tried my gold card from the myTouch. But apparently it really is possible. I guess I don't care as much since it's not mine.
I have made a small utility that will install CWR on the LG thrill. Untested on the optimus 3D....
Thanks to designgears for outlining the original procedure in this tread: http://forum.xda-developers.com/showthread.php?t=1257588
WARNING:
Your warranty is now void.
I take no responsibility for bricked, dead, or unresponsive phones. If you are uncomfortable using this tool, then DON'T. Furthermore, I created this utility for my phone, and decided to share it with the community.
This utility was coded in c# in a windows 7 environment. I can only speak to this working on windows 7. If it works on XP, great; but I only tested it on my windows 7 system. Confirmed working in XP by: gentzleon
Before you begin:
Phone must be rooted!!! Look here: http://forum.xda-developers.com/showthread.php?t=1251663
Must have an SD card in the phone.(This is used for the storage of the recovery backup)
Drivers MUST be installed! ( Direct Link: Here)
Instructions:
1). Plug phone into computer via USB cable.
2). Turn on USB Debugging mode
3). Launch 1click_CRW with admin privilages (right click->run as Administrator)
4). Enjoy
Notice
Because people have different computer speeds and the fact I wrote this in 10 minutes, there is a pause between each command. Just click 'ok' when the popup messages says waiting.....Its fool proof.
ALSO: I did not put any error checking in it because I did not feel the need. I created this for fun and decided to share it.
If you see an error from ADB like no devices found, make sure your drivers are installed and restart the computer.
colbur87 said:
I have made a small utility that will install CWR on the LG thrill. .
Click to expand...
Click to collapse
Just thought i'd contribute and attached the drivers here, if you don't approve then remove it
http://www.lg.com/us/products/documents/LGAndroidDriver_Ver_1.0_All.exe
latinohot said:
Just thought i'd contribute and attached the drivers here, if you don't approve then remove it
Click to expand...
Click to collapse
By all means go a head. I was going to but just got done driving 9 hours. Thanks for posting them.
seems to work fine in XP Pro.....nice and easy for those that are scared....foolproof....
Nice.... wish i had time to do... have newborn and wife so time is limited.... great job... do you mind if i add this to my ... how to op?
Not the whole thing.. but a link to this post
Sent from my LG-P925 using XDA App
Good job man, a lot of people have been waiting for this. Everyone get your rom on already!
Thanks. Sorry I didn't get to it as I said. That's why I love this place. If I drop something, someone else picks it up.
gentzleon said:
seems to work fine in XP Pro.....nice and easy for those that are scared....foolproof....
Click to expand...
Click to collapse
Thanks for confirming this. I will edit the main post sometime today.
rdannar said:
do you mind if i add this to my ... how to op?
Not the whole thing.. but a link to this post
Click to expand...
Click to collapse
Sure no prob at all.
This installed cwr just fine but when i try to make a backup or install a new rom it says error cannot mount sd card does anyone know y this would happen
Freaking sweet. I was hoping to find something easier to do this with that having to go through the other method to flash GB Roms. That is what this is for right?
All those having problems installing, make sure all your permissions to /data are checked-(all 9) if not you will not be able to install recovery...
To set permissions you must;
Have root explorer or the free app ES file explorer.
---Navigate to /data and press and hold
---Select properties
---you will see at the bottome where it says permissions an option to change
--- Select change and make sure all are checked.,
---click out, reboot phone and it should all work..
There have been instances where the folder will change back permissions or not save the new permissions so just perform it again... Enjoy the 1 click CWM Now If this could be included in the script it will make it fool proof.....
gentzleon said:
All those having problems installing, make sure all your permissions to /data are checked-(all 9) if not you will not be able to install recovery...
To set permissions you must;
Have root explorer or the free app ES file explorer.
---Navigate to /data and press and hold
---Select properties
---you will see at the bottome where it says permissions an option to change
--- Select change and make sure all are checked.,
---click out, reboot phone and it should all work..
There have been instances where the folder will change back permissions or not save the new permissions so just perform it again... Enjoy the 1 click CWM Now If this could be included in the script it will make it fool proof.....
Click to expand...
Click to collapse
I will add this when I get home from work.
mauriciorubio said:
This installed cwr just fine but when i try to make a backup or install a new rom it says error cannot mount sd card does anyone know y this would happen
Click to expand...
Click to collapse
Anyone?
Sent from my LG-P925 using XDA App
mauriciorubio said:
Anyone?
Sent from my LG-P925 using XDA App
Click to expand...
Click to collapse
Can you manualy mount the sd card in Clock work by going to mounts and storage...and mount sd card? ALso, i know this is a stupid question, but do you have an sd card in your phone?
No I can't manually mount it and I dont have an external sd card do I need one? I just switched phones from the samsung captivate and did not need one to mount sd card Is it different for the thrill
Sent from my LG-P925 using XDA App
mauriciorubio said:
No I can't manually mount it and I dont have an external sd card do I need one? I just switched phones from the samsung captivate and did not need one to mount sd card Is it different for the thrill
Sent from my LG-P925 using XDA App[/QUOT
It all depends on where you are instlling the file.
I however went to my local fry's and got an eight gb card for 15 bucks.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
colbur87 said:
I will add this when I get home from work.
Click to expand...
Click to collapse
Thanks....this for sure is the easiest way to install CWR
gentzleon said:
Enjoy the 1 click CWM Now If this could be included in the script it will make it fool proof.....
Click to expand...
Click to collapse
I think I may change this app and create it in a windows form...I will have a button that follows the same procedure as it does now, and a second button to fix permissions..However, should I have it apply the permission change to the entire /data? Seems unsafe to me, but I'm paranoid.
Also, work has been long, and my wife and I are in the final process of buying a new house. So that is why I haven't been on much.
Figured it out thanks for this tool
Sent from my LG-P925 using Tapatalk
I can confirm this works on the p920 (or at least a p925 flashed over to a P920). I've done it on two phones.
Sent from my GT-P7510 using Tapatalk
Hi All,
Please can ANYONE just jot down step by step the instructions/route they took to install Linux as part of their dual / triple boot setup please...? I have tried to follow the posts, to no avail. The instructions that come with SmackMe2 or Kexec are brief by means... I've copied them to the \Boot partition, until it says no space... And hence my other posts, related about increasing Boot Partition, and the likes...
I've now ended up with a bricked Touchpad, TWICE!!! Last brick was so bad, had to re-partition it and everything... Meant I couldnt take it away on holiday as I planned.
So please, if you can... can you list the exact way to go about getting Ubuntu Linux 12.04 + Android, as well as WebOS installed please...
And do we really need all of: NSBoot / SmackMe2 / Kexec / MemBoot / others....??
Thanks, Lister
Lister Of Smeg said:
Hi All,
Please can ANYONE just jot down step by step the instructions/route they took to install Linux as part of their dual / triple boot setup please...? I have tried to follow the posts, to no avail. The instructions that come with SmackMe2 or Kexec are brief by means... I've copied them to the \Boot partition, until it says no space... And hence my other posts, related about increasing Boot Partition, and the likes...
I've now ended up with a bricked Touchpad, TWICE!!! Last brick was so bad, had to re-partition it and everything... Meant I couldnt take it away on holiday as I planned.
So please, if you can... can you list the exact way to go about getting Ubuntu Linux 12.04 + Android, as well as WebOS installed please...
And do we really need all of: NSBoot / SmackMe2 / Kexec / MemBoot / others....??
Thanks, Lister
Click to expand...
Click to collapse
I know your a noob that's cool I was in that boat before. but I usually search before I come to a forum and ask questions because 9 out of 10 times this has been asked before. If you knew Linux can get on the touchpad then there's already posts about it. If you cant find it on the forum its simple as opening up your web browser and googling it.
http://liliputing.com/2011/08/how-to-install-ubuntu-linux-on-an-hp-touchpad.html
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Hi hovax615,
Thanks for your quick reply / help... I'm a noob when it comes to HP Touchpad Development, and the tweaks/tricks of the Touchpad world.. But not a noob when it comes to Computers / Android... as I work in IT, as a Support Technician for many years...
I've done my fair share of searching the forums, both here, and other boards and info on native Linux seems very thin on the ground. When I ask on here, get very little replies... And the threads that were created by the OP just list the files to download, with very little instruction on how to use them. I've tried to follow them best I can, and so far all what Ive tried do not work!! I've used MoBoot (or whatever its called), Kexec, NSBoot and SmackMe2, all to no avail....
Due to the storage restrictions of Touchpad, I've even swapped files around in the \Boot partition to allow for SmackMe2 to reside in its limited space. I've ran the programmes they suggest installs Linux, and it goes all through the motions, but nothing is visible or boots afterwards. I can multi-boot between WebOS and Android straight forward enough, but nothing seems to work with Linux...
Thanks for your suggestion on CHroot, and someone else suggested that in a previous thread... But from my understanding, isnt that an Emulated environment? It boots/runs from within either WebOS or Android?? From what I've seen on these forums, is that you can get Ubuntu 11 / 12 or even 13 to boot natively from its own partition via MoBoot or Kexec...
I dont like the looks of Ubuntu 13 ported to Touchpad based on its dark theme GUI, hence why I am trying to get Ubuntu 12.04 or 12.10 working...
So what I'm really after, is instructions to get Linux to install from a fresh WebOS install... Do I use SmackMe2 or NSBoot to install it?? And then do I load it with either MoBoot or Kexec?? I've only ever had it listed in Kexec loader once, and even then it didnt boot...
Any idea's on the above methods welcomed please... I'm trying with Ubuntu 12.10 with this file "TouchPadBuntuRootfs1210v2.tar.gz" which is around 600Mb large... and it installs, but nothing boots afterwards, other than WebOS or Android...
Many thanks, Lister
https://code.google.com/p/hp-touchpad-ubuntu/wiki/Installation
Here's one to follow if you didn't see this
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Hi hovax615,
I think I saw that one a while ago, but have over looked it since... It looks perfect, and seems fairly straight forward to run, and is exactly what I need...
One quick question, when it says root of Media, (media, refering to SD Card mounting). Do I...
\Media\ (place all files here just in the root)
or,
\Media\Internal\ (create a folder called, "Internal" at root level, and place all files within this folder?)
After that, it should be fairly straight forward, hopefully... and looks a lot better than other options, thank you...
Lister
[email protected] said:
https://code.google.com/p/hp-touchpad-ubuntu/wiki/Installation
Here's one to follow if you didn't see this
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Hi hovax615,
Forget the above/below question, I found out that all the files need to just go directly in the root of USB storage, and not require a (internal) folder on MEDIA partition.
Well all has gone reasonably well this time. I now have MoBoot with both WebOS and Ubuntu....
WebOS loads flawlessly... However Ubuntu loads the pre-boot kernel (all the writing.......) and then reboots to MoBoot loader.... I have re-ran the Kernel script, so I dont keep loosing chunks of 4GB storage... but still fails to boot Ubuntu (other than loader). Any idea's...???
Many thanks, Lister
Lister Of Smeg said:
Hi hovax615,
I think I saw that one a while ago, but have over looked it since... It looks perfect, and seems fairly straight forward to run, and is exactly what I need...
One quick question, when it says root of Media, (media, refering to SD Card mounting). Do I...
\Media\ (place all files here just in the root)
or,
\Media\Internal\ (create a folder called, "Internal" at root level, and place all files within this folder?)
After that, it should be fairly straight forward, hopefully... and looks a lot better than other options, thank you...
Lister
Click to expand...
Click to collapse
I'd say do a fresh start again. And run it this way.
http://www.techwarelabs.com/how-to-install-ubuntu-on-your-hp-touchpad/
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Hi hovax615,
No need now, as I got it to fully install and boot up last night...
I'd just like to say a BIG THANKS to Hovax615, who has helped me to install Ubuntu onto the HP Touchpad... and for not giving up, and offering other way's to install it...
To anyone else wanting to install Ubuntu, and having problems... I suggest not using SmackMe2, Kexec or NSBoot as they do not work!! I'm sure they prolly do, but with no instructions included with those tools, and lack of feedback from anyone... I have given up on them!
The method that Hovax615 mentioned in his (code.google.com/) link works a treat, and is fairly easy to follow... My advice, DO read what it says on screen... The problem i had with the OS not loading was because I didnt read an obscure message that said press "1 or 0".... other than that, smooth as anything...
Only problem I have now, is that the graphic/screen is garbaged... Pretty sure its just drive related, so will wipe this build and install a new build, maybe even 13.04 (just dont like the black theme). And the WiFi commands dont work, only the first line does.... Other than that, very impressed with Ubuntu on Touchpad...
Thanks, Lister
I've never installed Ubuntu myself but I was so glad to help to get you to be able to install Ubuntu. I'm thinking about doing the same today and installing it. Might need a little help also
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Hi hovax615,
Oh right, sure go for it... Its actually really cool once you got it all installed (WebOS, Android and Ubuntu).... And I fully recomend you do it via the original link to you sent me (Code.Google.Com/xxxxxxx) rather than the CHroot method. From my understanding, CHroot is emulated and not native, and not only that, it looks more complicated...
The guide I followed was a breeze, so so simple.... Basically, the only bit that got me confused was the Media / Internal as Ive seen the MASS STORAGE part called Media before. But never seen it called Media / Internal and so thought you had to create a folder at the root of Media, called Internal... But you dont!!! Just dump all the files at the root of that folder... and then copy the commands.
When running the commands, look to see what it says on the screen... I ignored where it said "Press 1 if xyz happened, or Press 0 if xyz didnt happen"... and so pressing [Enter] caused it to fail, as it didnt really install. But if you read it, and press the right key, which I think was 0 followed by 1, then it all installs fine....
I have a problem with the graphics on Ubuntu, which could either be bad install (gonna try a re-install), or try the newer 13.04 (over 12.10 that I currently have).
But sure, if ya get stuck, let me know.... and thanks once again for pointing that link out, and for helping...
Lister
Okay so I got Ubuntu 13.04 e17 working on my touchpad vis the smackme2 method not the method i gave you because i tried and it would execute it properly. I'm not familiar with Linux or Ubuntu. I'm having a hard time trying to connect to the internet
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Hi Hovax615,
Yaaay, well done for getting Ubuntu installed... especially via SmackMe2!! Dont know why, but that didnt work at all for me?? Although I use using the older version of Ubuntu, whether that has anything to do with it??
Anyway, I'm not so keen on the new build (13.04) as I think the interface looks ugly on that build, I like the plain Ubuntu look/feel....
Yeah, I too am having problems with the WiFi on my older build too... I've typed in the commands to kick-start it, apparently... But even the commands don't work...
Gonna have another go at it tonight.... LOL
Cheers, Lister
Lister Of Smeg said:
Hi Hovax615,
Yaaay, well done for getting Ubuntu installed... especially via SmackMe2!! Dont know why, but that didnt work at all for me?? Although I use using the older version of Ubuntu, whether that has anything to do with it??
Anyway, I'm not so keen on the new build (13.04) as I think the interface looks ugly on that build, I like the plain Ubuntu look/feel....
Yeah, I too am having problems with the WiFi on my older build too... I've typed in the commands to kick-start it, apparently... But even the commands don't work...
Gonna have another go at it tonight.... LOL
Cheers, Lister
Click to expand...
Click to collapse
It shouldn't have had an effect using the older ones you just have to download the proper things
uImage.kexec" and the "kexec-<OSNAME>.tar along with moboot and whatever os your going to use on a clean install. Yeah I kind of was having a hard time navigating on 13.04 we'll both figure it out sooner or later about the WiFi situation.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
[email protected] said:
...Yeah I kind of was having a hard time navigating on 13.04 we'll both figure it out sooner or later about the WiFi situation.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Bottom right corner, blank space next to the OnBoard icon. Hit that, and it will ask which access point to connect to.