I rooted my hero using the 1 click root from the market. I then used rom manager to make a back up image, then flashed cyanogenmod 7.0.2 on it. There was no Market, my home button didnt work, and a few other quirks so I decided to go back to my original os. I clicked on the manage and restore in rom manager. It went thru the process and said restore complete. when it boots up it has overlayed images, and says "the application Settings(process.com.android.settings)has stopped unexpectedly.FC. As i go thru the set up, many of they options are greyed out and not accessable, then when i get to "finish setup" it FC's and says" the application Setup(process.com.htc.android.htcsetupwizard)has stopped unexpectedly. Then i get a black screen. Just wondering if I can get a good Back up image from someone to put on my sd card, then do a restore? I am pretty noob at all this, so any help would be greatly appreciated!!!!!
Mmhmm...first, 1 click bad, second, rom manager...worse in the wrong hands...
Why don't you download the gapps and put it on the root of your sdcard and then flash it after the 7.0.2 and then you'll be ok I'm sure if you take a little time to figure out you may be the only person that can fix your issue. By that, what I mean is in the install steps I'd bet it mentions to install gapps and if it doesn't let me know and I'll get the op to add that step.
As for all your messed up permissions try running fix permissions in rom manager if you can get there.
~maybe I set it too high...
i tried that first but coulnt get it to work, so i downloaded the rom directly from rom manager. The only thing i can do on the phone now is thru clockworkMod recovery
You can do fix permission in cwm also, I think under advanced. Just whatever you do, do NOT format recovery or misc if those options are in your recovery.
If you're in recovery though you're in the right place to flash. It's just
Wipe data /factory reset
Advanced -> wipe dalvik cache
Back
Install zip from sdcard and choose the7.0.2 zip and then thesame thing with gapps.
Reboot system
Edit, you could also just try to restore again from cwm. I'm assuming it holds the backup.
~maybe I set it too high...
ok, im off to bed...i will try this in the morning and post my status, thanks for your help so far
Did you ever wipe between installations and flashes? I always play it safe and wipe boot, cache, data, system and dalvik cache when I am flashing different ROMs and when restoring. Try going back into recovery and wipe what I posted and then restore your backup.
Sent from my HERO200 using XDA Premium App
I couldnt wait, I had to try it....YOU ARE ABSOLUTELY AWESOME!!!!!!!!!!!! Thank you so very much. I already had Rocksteady and Gapps downloaded on my comp, so i put those on the sd, followed your steps and BAMM! Works great! I can not thank you enough!
Related
So I was able to successfully install CM7 on my new NC last week and got it just the way I want it. Now I would like to try Miui. I have never used Rom Manager (not working on the Epic), and would like to know how to go back and forth using that app.
Can someone break it down so I can follow along painlessly?
ROM manager is nice for doing incremental updates. What you want to know how to use is clockwork mod.
I'm in the car ATM, but I'll be at my computer in 15 or so. I'll write up what you need.
Sent from my Vortex using Tapatalk pro
OK, first turn on wifi. Then, from within Rom manager check and make sure you have the latest Clockworkmod flashed.
at the top it will say 'current recovery' if that's 3.2.0.1 then you're good, if not, select 'flash Clockworkmod'
if you get a selection between old and new, select new.
Now would be a good time to make a directory on your SD-card called 'ZIPS' and put the .zip files of whatever rom you want to flash.
CM7 nightlies
MIUI
And, you'll want to pickup the Gapps (google applications) zip from here
Clockworkmod is a recovery program. It is able to boot ahead of anything else and has access to every partition. From within clockwork mod you're able to do system level backing up, restoring, or just plan changing. I'll give you the run down on flashing different roms.
To boot Clockworkmod just turn off the nook, then hold the [pwr]+['n' button] until you see the text 'booting into recovery' release the buttons.
Now within clockworkmod [vol+] is up, [vol-] is down, ['n' button] is select, and [pwr] is back.
First we need to backup your current data. With this backup you will be able to restore to that EXACT time and setup. Make as many as you want, feel free to rename then to keep track.
->backup and restore->Backup
The backup is saved to the SD-card in the Clockworkmod folder
Then we need to wipe all that uncool old data from the emmc. Pick one, not both.
Scenario #1: upgrading versions of the SAME ROM
->mounts and storage->unmount /cache
->mounts and storage->format /cache
->advanced->wipe dalvik cache
Scenario #2: SWITCHING from one type of ROM to another
->mounts and storage->unmount /cache
->mounts and storage->format /cache
->mounts and storage->format /data
->mounts and storage->format /system
->advanced->wipe dalvik cache
->wipe data/factory reset (a little redundant, but it can't hurt)
Now to install the new ROM or ROM version
->install zip from sdcard->choose zip from sdcard->ZIPS/->ROM file
->install zip from sdcard->choose zip from sdcard->ZIPS/->Gapps file (should look something like this: gapps-gb-20110613-siged.zip)
After you've installed a new update of a ROM or a new ROM you'll have to fix the permissions.
->advanced->fix permissions
Reboot and you're done.
This should cover all of your flashing needs. If I missed something please point it out. If something doesn't work just post it, someone will know.
Awesome breakdown! Now to get apps back, do I need to use titanium or can I go to restore in CWM and do it that way?
Thanks again, that was very useful!
I seem to remember that titanium backup's app data restore does not work for CM7, only restoring the app itself works.
The restore in CWM will REVERT you back to when you backed up, undoing everything you've done since.
I can confirm that Titanium backup does work in CM7 I use it all the time to restore apps and data.
It also worked after I installed Miui. Batch restored all of my apps and data, no FC's.
Glad to hear it worked ok for you.
Hi fellow blackers,
My optimus black was on Nova Rom 2.2 v8:
http://forum.xda-developers.com/showthread.php?t=1161015
And I flashed it to v20n:
http://forum.xda-developers.com/showthread.php?t=1441901
I followed the instructions specifically these two before proceeding with the zip install.
1. Wipe Data/Cache (if not wiped, might cause problem)
2. Advanced > Wipe Dalvik Cache (same as data/cache, might cause problem)
After flashing, I can't seem to install any app from Market. It says that I have insufficient space on device.
So did some searching (google and here on XDA):
Here are their suggestions:
1. Install Marketfix - unfortunately, I can't install this because it is already saying I have insufficient space.
2. Clear market cache - after clearing (cache and data), I still says insufficient space
3. Uninstall market update - Going to settings - Application - manage application then selecting Market, I don't see any uninstall button. Just Force close, cancel and clear cache, clear data..
4. Finally I saw knzo's supposedly fix for this: Something to do with file system (nova is on EXT4 while stock is on EXT3)
http://forum.xda-developers.com/showthread.php?t=1212370&highlight=insufficient
I wasn't able to try option 1 because the file was removed on all file sharing sites.
Options 2 and 3 - restore factory settings isn't working. The phone is not doing anything after I click Erase everything. It just hangs
Any other suggestions?
Try reflash ROM with wipe all data and cache in CWM including dalvik cash and formating partitions in "mounts&storage".
Or this!
Try wipe cache and dalvik cache...worked for me
hmm pardon me, but how do I boot into recovery? I tried powering the device on while holding volume down (also tried up and G button) but it didnt reboot into recovery.
Artyomperec said:
Try reflash ROM with wipe all data and cache in CWM including dalvik cash and formating partitions in "mounts&storage".
Or this!
Click to expand...
Click to collapse
Since I can;t install anything (rom manager etc.), I think I needed to do what you advised.
I was able to flash the stock then started up from there
Since I can;t install anything (rom manager etc.), I think I needed to do what you advised.
I was able to flash the stock then started up from there
Click to expand...
Click to collapse
Have you tried flash this MOD for enter in recovery from power off phone pushing "G" button, not pressed and hold, but pushing every time when boot, work for me!
just try this
dsokua said:
Hi fellow blackers,
My optimus black was on Nova Rom 2.2 v8:
http://forum.xda-developers.com/showthread.php?t=1161015
And I flashed it to v20n:
http://forum.xda-developers.com/showthread.php?t=1441901
I followed the instructions specifically these two before proceeding with the zip install.
1. Wipe Data/Cache (if not wiped, might cause problem)
2. Advanced > Wipe Dalvik Cache (same as data/cache, might cause problem)
After flashing, I can't seem to install any app from Market. It says that I have insufficient space on device.
So did some searching (google and here on XDA):
Here are their suggestions:
1. Install Marketfix - unfortunately, I can't install this because it is already saying I have insufficient space.
2. Clear market cache - after clearing (cache and data), I still says insufficient space
3. Uninstall market update - Going to settings - Application - manage application then selecting Market, I don't see any uninstall button. Just Force close, cancel and clear cache, clear data..
4. Finally I saw knzo's supposedly fix for this: Something to do with file system (nova is on EXT4 while stock is on EXT3)
http://forum.xda-developers.com/showthread.php?t=1212370&highlight=insufficient
I wasn't able to try option 1 because the file was removed on all file sharing sites.
Options 2 and 3 - restore factory settings isn't working. The phone is not doing anything after I click Erase everything. It just hangs
Any other suggestions?
Click to expand...
Click to collapse
2 days ago I got this problem too, but SOLVED when I upgrade to CWM 5.0.2.6 (from CWM 4.0.1.5) then re-flashing with redy2006 V20N
what version CWM u have?
dsokua said:
hmm pardon me, but how do I boot into recovery? I tried powering the device on while holding volume down (also tried up and G button) but it didnt reboot into recovery.
Click to expand...
Click to collapse
just try adb reboot recovery from your PC to go to CWM
Just for be able to post new thread. Sorry.
kingtawon said:
2 days ago I got this problem too, but SOLVED when I upgrade to CWM 5.0.2.6 (from CWM 4.0.1.5) then re-flashing with redy2006 V20N
what version CWM u have?
just try adb reboot recovery from your PC to go to CWM
Click to expand...
Click to collapse
Ooh, I didn't update my CWM so I think it was on 4.x.x.x, Was able to flash and install apps in 5.0.2.6
Anyway, Im on temasek kangs build now
dsokua said:
Ooh, I didn't update my CWM so I think it was on 4.x.x.x, Was able to flash and install apps in 5.0.2.6
Anyway, Im on temasek kangs build now
Click to expand...
Click to collapse
so, still got same issue ?
Can anyone please help?
I just installed the Ultimate JB ROM XXLSA 4.1.2 v5 upgrade on top of v4.
All went perfectly well and I was able to enter all my setup and account details after the initial boot of the phone.
When I tried to re-install apps from Google Play, however, (Titanium Backup Pro, Quickboot) the phone hangs at the Samsung Splash screen and won't go any further. I re-tried the procedure 3 times but each time the result is the same.
Can anyone tell me what the problem could be? I followed all the instructions about wiping etc. correctly.
Trevor
v4 and v5 use completely different bases (LS7 and LSA).
I would save everything to my ext SD card.
Then goto Settings > Backup & Restore > Factory Reset (don't click on format external sd card).
Your phone will restart and do some crazy things. Then restart again.
When you get to the welcome page, or bootloop... take the battery out (its safe).
Then hold Vol Up, Home and Power (let go of Power after ~5-15sec) and goto recovery.
In recovery, wipe cache.
Then format data.
Then format system.
Then format cache.
Then wipe Dalvik cache.
Then install the v5 zip.
It shouldn't restart automatically, but it might, don't worry let it.
Now you should have a fully, fresh, clean install of v5.
Connect to your wifi, go through the start up.
Goto SuperSU and update binary.
Goto Play Store and install TiBu.
Open TiBu and grant it root access.
Close TiBu.
Connect phone to PC, then copy your TitaniumBackup folder into your sdcard directory.
Open TiBU and now, it will see your previous saves.
Restore your apps + data.
Presto! No bootlooping and no App FC !
Thanks for going to all the trouble to write all that out.
I followed the instructions to the letter but no, same result I'm afraid: it worked fine but as soon as I installed Titanium and granted root access, it asked me to choose to restore the original phone ID which I did. The phone rebooted but then wouldn't go past the "Samsung Galaxy Note Gt-N7000" screen.
I have no choice but to restore from my Nandroid backup. This is really p****ng me off but at least I can restore v4 easily.
Thanks again
Trevor
Kangal said:
v4 and v5 use completely different bases (LS7 and LSA).
I would save everything to my ext SD card.
Then goto Settings > Backup & Restore > Factory Reset (don't click on format external sd card).
Your phone will restart and do some crazy things. Then restart again.
When you get to the welcome page, or bootloop... take the battery out (its safe).
Then hold Vol Up, Home and Power (let go of Power after ~5-15sec) and goto recovery.
In recovery, wipe cache.
Then format data.
Then format system.
Then format cache.
Then wipe Dalvik cache.
Then install the v5 zip.
It shouldn't restart automatically, but it might, don't worry let it.
Now you should have a fully, fresh, clean install of v5.
Connect to your wifi, go through the start up.
Goto SuperSU and update binary.
Goto Play Store and install TiBu.
Open TiBu and grant it root access.
Close TiBu.
Connect phone to PC, then copy your TitaniumBackup folder into your sdcard directory.
Open TiBU and now, it will see your previous saves.
Restore your apps + data.
Presto! No bootlooping and no App FC !
Click to expand...
Click to collapse
Mystery solved - well partly. Turns out Titanium Backup Pro was causing it on my phone for some reason. This was naturally the first app I wanted to install so I could restore apps one by one from the Nandroid backup. I tried Quickboot too which also caused the same problem so because TB and then QB did the same thing I assumed every app was going to cause trouble. Shouldn't jump to conclusions, I know.
I have JB Ultimate XXSLA v5 installed and am restoring my apps one at a time from Google Play and making new Nandroid backups as I go along.
And now I just tried installing TB free version - the phone boots normally! Then I installed the TB Pro version and again the phone boots normally. When TB was the first app I installed after the ROM upgrade it hung up the phone every time on 6 attempts. I'll try re-installing Quickboot now and see what happens. Conclusion: I must have been doing something in the wrong sequence but can's see what.
Many thanks for your help.
Trevor
sacentre said:
Thanks for going to all the trouble to write all that out.
I followed the instructions to the letter but no, same result I'm afraid: it worked fine but as soon as I installed Titanium and granted root access, it asked me to choose to restore the original phone ID which I did. The phone rebooted but then wouldn't go past the "Samsung Galaxy Note Gt-N7000" screen.
I have no choice but to restore from my Nandroid backup. This is really p****ng me off but at least I can restore v4 easily.
Thanks again
Trevor
Click to expand...
Click to collapse
I'm not allowed to ask this in the dev forum as I'm not up to my 10 posts quota, so sorry for posting this here!
In the LightJB instructions instruction 3 is "wipe data, wipe cache, wipe dalvik-cache, wipe system"
I've got CWM installed (LQ4 and CoCore 6.0) and the options in the CWM recovery menu are "wipe data/factory reset" and "wipe cache partition".
Am I right in assuming that I should choose to do both of those two options, and then also in the "advanced" menu do the "wipe dalvik cache" option too? Just checking! Once I've done this once, I'll become a natural at it...
Cheers!
Matt
I guess you're right... But why don't you just flash a CoCore E kernel with TWRP.. Wouldn't that be much easier?
Its way more user friendly than CWM....
And yes, do have a backup of everything as Factory Resetting and wiping data is going to erase all your apps, etc.
BTW- Questions like this belong to Q & A thread.. Not the Development thread
Sent from my phone, because I'm away from my PC right now
Sami Kabir said:
I guess you're right... Why don't you just flash a CoCore E kernel with TWRP.. Wouldn't that be much easier?
Its way more user friendly than CWM....
Sent from my phone, because I'm away from my PC right now
Click to expand...
Click to collapse
I guess I'd just heard more about CWM than TWRP. I might be a noob here, but I'm not put off by command line-type stuff. I can still remember how to join multiple uuencoded text files together to get lovely pictures of Winona Ryder appearing on my screen in 1993, before I'd even heard of a graphical browser.... happy days!
Cheers for the pointer!
Matt
go advanced ...
tapatalked
larkim said:
Am I right in assuming that I should choose to do both of those two options, and then also in the "advanced" menu do the "wipe dalvik cache" option too? Just checking! Once I've done this once, I'll become a natural at it...
Matt
Click to expand...
Click to collapse
Matt,
Read my thread with CWM guide (see my signature) and i think you will be fine.
Do a Nandroid Backup before start to flash a new ROM.
Wipe data/factory reset
Wipe cache partition
Advanced -> Wipe Dalvik cache
1. Download the ROM from the link given in the article featuring that ROM. It should be a zip file.
2. Connect your phone to your computer via USB and mount its storage card.
3. Copy the downloaded ROM to the root of the storage card.
4. Power your phone off and reboot it into recovery. This will involve using a combination of your device’s hardware keys. Once in recovery, you can navigate its menu using the volume up and volume down hardware keys or your phone’s trackball / optical track pad if it comes equipped with one.
5. Use the ‘backup and restore’ feature of recovery to backup your existing ROM installation, software and data. This step is known as performing a nandroid backup. ALWAYS perform a backup before flashing a custom ROM, UNLESS you can afford to lose everything that’s on your phone at the moment.
Note: ALWAYS choose to perform the following steps 6, 7 and 8 UNLESS the ROM you are attempting to flash is an updated version of the same ROM that you are currently using, and is compatible with the current installation’s data. It is usually mentioned with the update whether you can install it over a previous version without wiping its data or not.
6. Get back to the main recovery menu and use the option ‘wipe data/factory reset’. You will be prompted to confirm this action. Select “Yes – Delete all user data”.
7. From the main recovery menu, select ‘wipe cache partition’. You will be prompted to confirm this action. Select ‘Yes – Wipe Cache’.
8. From the main recovery menu, enter the ‘advanced’ menu. From this menu, select ‘Wipe Dalvik Cache’. You will be prompted to confirm this action. Select ‘Yes – Format/System’.
9. From the main recovery menu, enter the ‘Mounts and Storage’ menu. From this menu, select ‘Format/System’. You will be prompted to confirm this action. Select ‘Yes – Wipe Dalvik Cache’.
10. Go back to the main recovery menu by pressing the back button and select the ‘Install zip from SD card’ option.
11. Select ‘choose zip from sdcard’ to get a list of the files and folders on your SD card. Scroll to the ROM’s file that you copied there in step 3, and select it. You will be prompted to confirm this action. Select ‘Yes – Install file_name.zip’ where file_name.zip is the name of the zip file that you are trying to install.
12. Wait patiently while the ROM is flashed to your phone via recovery.
13. Once the installation is complete, head back to the main recovery menu if you aren’t there, and select ‘reboot system now’. Your phone will now boot into the newly installed ROM.
Click to expand...
Click to collapse
R_a_z_v_a_n said:
Matt,
Read my thread with CWM guide (see my signature) and i think you will be fine.
Do a Nandroid Backup before start to flash a new ROM.
Wipe data/factory reset
Wipe cache partition
Advanced -> Wipe Dalvik cache
Click to expand...
Click to collapse
Done, thanks!
My last question - when i've rebooted, I'm prompted to sign into my Google Account and re-install my apps from the google backup. Is this the "best" way to do it, or is it better to use alternative sch as Titanium? I'm not bothered about lost data, the only data I care about is in my gmail account anyway.
Cheers!
Matt
Reinstall your apps with that app you make backups. If you do it with Titanium, then go for it, and restore with Titanium.
R_a_z_v_a_n said:
Reinstall your apps with that app you make backups. If you do it with Titanium, then go for it, and restore with Titanium.
Click to expand...
Click to collapse
Thanks. Its that sort of common sense stuff which I've found missing from many of the guides - they tell you how to root / flash etc, but leave nagging other questions unanswered - perhaps because the answers are so obvious to the authors that they are just second nature.
As it happens, I didn't bother with a Titanium backup as I wanted a clean phone - I've been trying to resolve a strange issue where my wifi goes really slow and stuttery after the phone has been on for a few hours. No-one else seems to have the issue, so I suspect it is down to at least one of my apps causing some chaos. With that in mind, a fresh install with no baggage seemed to be the best way to go.
(I used to suspect the Facebook apps (particularly Pages Manager) but I don't think they are the cause)
Thanks for all the help!
Matt
Sami Kabir said:
I guess you're right... But why don't you just flash a CoCore E kernel with TWRP.. Wouldn't that be much easier?
Its way more user friendly than CWM....
And yes, do have a backup of everything as Factory Resetting and wiping data is going to erase all your apps, etc.
BTW- Questions like this belong to Q & A thread.. Not the Development thread
Sent from my phone, because I'm away from my PC right now
Click to expand...
Click to collapse
For me cwm is more user friendly and more straight forward compared to twrp. I once tried twrp and after I mount system suddenly it said there's no os installed and I can't boot my phone. Luckily I can still enter download mode to flash back fw with odin. I don't understand how twrp works..haha :silly:
larkim said:
Thanks for all the help!
Click to expand...
Click to collapse
It was my pleasure, Matt. :highfive:
Well, for no other reason than that I wanted to tweak a few things before I started to live with LightJB, I chose to restore my phone using the CWM nandroid restore.
Bad move!
It all seemed to work fine, but on restoring I get the message that "Unfortunately, the process com.google.process.gapps has stopped". Mildly worrying, but moving on...
Then I came to try to reply to a sms message from my wife. Pressing in the reply box didn't bring up a keyboard. Odd.
I went into other apps and found I couldn't type there either.
Went into settings, and neither the samsung keyboard nor the swype keyboard appear to have been re-stored via the backup / restore.
Any hints?
Matt
I have successfully flashed @shinobisoft's latest CM11 build and it runs fine. However, I wanted to do a "clean" install. I used philz recovery to install the new ROM. Prior to install, i used the clean up for new ROM install option and let it run through. To be sure everyhthing was "clean", I also wiped dalvik, cache, and even user media. I also formatted everything EXCEPT external SD, as that is where the .zips are located for install.
I installed ROM and gapps "modular" as well a chrome add-on, and rebooted phone.
When ROM loaded, I was greeted by the "choose language" screen, which is what i expected to see. I let it "settle" (Galaxy S2 experience) for about 15 minutes or so before I touched anything. When I went to complete setup, my wifi was already connected and the phone was linked to my account. It was using Apex launcher and the settings I used prior to updating.
What am I NOT wiping/formatting prior to installation?
jran0880 said:
I have successfully flashed @shinobisoft's latest CM11 build and it runs fine. However, I wanted to do a "clean" install. I used philz recovery to install the new ROM. Prior to install, i used the clean up for new ROM install option and let it run through. To be sure everyhthing was "clean", I also wiped dalvik, cache, and even user media. I also formatted everything EXCEPT external SD, as that is where the .zips are located for install.
I installed ROM and gapps "modular" as well a chrome add-on, and rebooted phone.
When ROM loaded, I was greeted by the "choose language" screen, which is what i expected to see. I let it "settle" (Galaxy S2 experience) for about 15 minutes or so before I touched anything. When I went to complete setup, my wifi was already connected and the phone was linked to my account. It was using Apex launcher and the settings I used prior to updating.
What am I NOT wiping/formatting prior to installation?
Click to expand...
Click to collapse
Sounds like /data isn't getting wiped or formatted.
jran0880 said:
I have successfully flashed @shinobisoft's latest CM11 build and it runs fine. However, I wanted to do a "clean" install. I used philz recovery to install the new ROM. Prior to install, i used the clean up for new ROM install option and let it run through. To be sure everyhthing was "clean", I also wiped dalvik, cache, and even user media. I also formatted everything EXCEPT external SD, as that is where the .zips are located for install.
I installed ROM and gapps "modular" as well a chrome add-on, and rebooted phone.
When ROM loaded, I was greeted by the "choose language" screen, which is what i expected to see. I let it "settle" (Galaxy S2 experience) for about 15 minutes or so before I touched anything. When I went to complete setup, my wifi was already connected and the phone was linked to my account. It was using Apex launcher and the settings I used prior to updating.
What am I NOT wiping/formatting prior to installation?
Click to expand...
Click to collapse
One other thing... Have you set up Google to track your installed apps/etc? If so, Google will automatically restore them.
Failbringer60 said:
I did a full wipe for the initial install. But for the newest build i wiped system only and flashed on top of the previous build. I can do a full wipe again and reinstall the newest build to see if it corrects my issues. But i can assure you i wiped everything when i installed the previous build.
Click to expand...
Click to collapse
shinobisoft said:
Umm... I'm seen a bunch of references in your posted log that refer to the old sdcard path ( as in stock, /storage/external_SD. New path is : /storage/sdcard1 ). This is telling me that you did NOT format your /system and or /data partition when you installed CM for the first time. Obviously the only way to remedy this is to do a fresh installation following the instructions I posted in the OP.
Click to expand...
Click to collapse
shinobisoft said:
One other thing... Have you set up Google to track your installed apps/etc? If so, Google will automatically restore them.
Click to expand...
Click to collapse
I changed the "auto restore" setting so it won't automatically install my apps and tried another "clean" install with the same results. It's almost like I'm restoring from a previous back up! I made sure to wipe and format everything twice just to be certain. Installed only CM and gapps zips, wiping dalvik and cache before booting system. My result was the same as previous..... Choose language.... WiFi connects, and my settings restore.... I am NEVER asked to login to my Google or Cyanogen account(s)......
I'm about to back up and wipe everything, use fastboot to format the partitions? Ideas? Thoughts? Suggestions?
Perhaps restore my "rooted factory ROM" from TWRP back up and start from there? Or restore from .kdz?
Maybe try a factory reset from Settings after installing? Kind of a long shot but that's what I had to do after flashing back to stock when nothing seemed to have changed ...