Database Develop

Clip On Stand for Apple Bluetooth Keyboard

Hello all... I'm new to this forum but have found it quite helpful in my quest to optimize and get every bit of juice out of my HD2. I have looked through so many posts trying to find information on stands as I have just purchased my apple bluetooth keyboard for use as a note taking device at school. I was going to buy another eeepc after I sold mine, but realized that with the keyboard this baby is actually quite powerful enough to be a baby computer at school. A lot of the stands seem really cool but I was wondering if anyone had found or figured out a way to modify a stand that could securely clip onto the space at the top of the apple keyboard.
Attached is a link to an image of the keyboard to give you an idea of what I'm working with. Seems the space at the top is about an inch. As I can't seem to find one I can buy yet, I've been trying to think of ways I could create a clip on from one of the stands like the smart stand but thought I'd throw this out to you guys for some ideas as I'm not getting very far. Sorry if this has been covered before, but I did do a lot of searching and didn't seem to find anything like this in particular so thought I'd post.
And, btw, I'm Elle. Nice to meet you guys.

Cool idea...let us know if you figure something out.

The whole concept just sounds strange to me. Using a small phone with a massive keyboard just to do some notes. Granted both devices are beautiful but working them both together, er no.
However each to their own and all. I can't think of a way to attach them together which wouldn't inherently ruin either the phone or keyoard but what I'd do if I was so inclined to use them both together, would be maybe buy the extended battery with kickstand and then use it like the image below (obviously you wouldn't need to lean your phone against the wall with the kickstand ).
I fail to see why the HD2 needs to be attached to the keyboard in the first place .
Update - my girlfriend has suggested you just use a bit of blu-tac lol.

That's what I've been doing, just without an appropriate stand but a self-created one. It's actually a rather cool setup; this is the smaller version of the keyboard and it decreases the weight I carry around immensely. The keyboard syncs wonderfully, I just thought it might be cool if there was a way to attach it to the keyboard. I'll let you guys know if I figure anything out specifically, there seems to be some interesting ways to manufacture a simple clip on that I'm figuring out the details for at the moment.

Did you ever figure out a simple stand? I just bought one of these keyboards. and it paired perfectly and all the keys work, except the specialized function keys.
Compared to other available bluetooth keyboards (Stowaway, Freedom, etc.), this one is probably overall less space (by volume) and lighter.
Cheers

Capdase stand
hi. Just to let you know that this stand actually works.
Alright, ignoring the iPhone (it sux anyways. ), the translucent stand thats holding the phone actually fits the hd2. Not only that, I have the silicon casing around the hd2 and the stand still fits! Of course, it stretches as the iphone is of a smaller width. How do i know? I tested my bro's stand and it has been with me since. Lets just say that the holder was no longer meant for the iphone due to the bigger hd2. I.e. Its mine!
P.s It goes horizontal and vertical.

There's a couple of threads on make-your-own stands My favourite is the credit-card one, which you then fold out whenever you need it. Keep it in your wallet/as part of your phone case and you're there!
http://forum.xda-developers.com/showthread.php?t=603363

iPhone stand
CCheck out this one: w w w. northsecure. com/iphone-stand/ (remove spaces)

Old thread, but anyway the extended battery with it's kickstand would do this amazingly

[Q] NC Car Mount between two headrests?

Dilemma, I have a nook color and the kids are bugging me to watch movies in the backseat of the car with it. I am looking for a mount that can strap to the two front seats headrests and basically allow the NC to hang in the open space between the seats. Has anyone seen such an item for the NC yet? I have three kids back there so middle location mounting for the NC is a must.

Yea, I was thinking about the same thing. I'm going on a trip in two weeks and would love to get some ideas from people. I was thinking of rigging something up with bungie cords.

Ebay is your friend... This looks to be a universal dock for Ipad and Galaxy tab, so we should fit being in the middle of the two devices.
http://cgi.ebay.com/Car-Headrest-Mo...ultDomain_0&hash=item255d934bd8#ht_1864wt_831
Not sure about the middle placement, but this is what I did in my infiniti.. (kind of a hack, but no drilling or cutting was required)

Thanks for the tip on the eBay item; I will keep that in mind for rear mounting to one headrest. I am going to keep on the search for something I can do between the two seats so I don’t have kids attacking each other back there trying to see the movie!!
I am considering getting a cheap silicone sleeve for it and then super glue some sort of strap to the back of the sleeve, to hang between the two seats. Likely will not look pretty but may serve its purpose if I can’t locate a "true" device to meet my needs.
PS- your hack looks pretty darn good for GPS usage!
norkoastal said:
Ebay is your friend... This looks to be a universal dock for Ipad and Galaxy tab, so we should fit being in the middle of the two devices.
Not sure about the middle placement, but this is what I did in my infiniti.. (kind of a hack, but no drilling or cutting was required)
Click to expand...
Click to collapse

dvcbwvfans said:
Thanks for the tip on the eBay item; I will keep that in mind for rear mounting to one headrest. I am going to keep on the search for something I can do between the two seats so I don’t have kids attacking each other back there trying to see the movie!!
I am considering getting a cheap silicone sleeve for it and then super glue some sort of strap to the back of the sleeve, to hang between the two seats. Likely will not look pretty but may serve its purpose if I can’t locate a "true" device to meet my needs.
PS- your hack looks pretty darn good for GPS usage!
Click to expand...
Click to collapse
Jeez man, you hit the brakes hard and that will act as a sling shot shooting the nC back into your kid's faces. I would try to find something that will hard attach to the center console if you have one. Don't use bungy cords or anything like that unless you budget some dental work to go with it.

bobzdar said:
Jeez man, you hit the brakes hard and that will act as a sling shot shooting the nC back into your kid's faces. I would try to find something that will hard attach to the center console if you have one. Don't use bungy cords or anything like that unless you budget some dental work to go with it.
Click to expand...
Click to collapse
Yeah point taken! I guess I typed my last comment faster than my mind was processing it. I will consider the kids safety first with my design- if I ever get around to building this. I think I will look at those dvd bags they sell at the store for portable dvd players that mount between two seats and get some ideas from one of those.

Anyone else order the padpivot?

pre-ordered a couple weeks ago, cant wait to get this thing in!
PadPivot
anyone else find this little stand amazing!?

Cool idea. Not sure if it'll work with the rubberized back of the NC. The original Nook doesnt have that kind of back I understand...

Looks pretty awesome I must say. They even have a nook color image amung the compatible devices shown. Pre-orders are taken here: http://www.padpivot.com/
$25 is a great deal.

You struck gold... that is spot on what I was looking for!!!!

devis said:
Cool idea. Not sure if it'll work with the rubberized back of the NC. The original Nook doesnt have that kind of back I understand...
Click to expand...
Click to collapse
The original Nook does have a rubberized back, but it's a different style/texture to the NC. I can't tell how that pedestal attaches, is it glued on?

Looks like a gel/rubber sticky pad much like those anti-slip pads you toss on the dash for a GPS unit.
Get it wet and let it air dry like those jelly slime toys you toss at the wall and it creeps down.
At least that is how it looks on the site and based on the FAQ.
The video does show a NC, but they don't mention it on the site. Might be worth an email to them.

Does it do vert?

Doesnt look like it is available to pre order anymore... bummer.

I seriously thought about it, but decided against it. I just don't find myself in a position that that would be useful. How often do people set it on their lap and use it hands free?

It doesnt have to be used on your lap. I would like it to use on the plane when watching movies.

Ah, I already have a few stands I can use for that.

Ordered 4.

I want to order 2 but it says pre orders are full
If anyone has an extra one once they ship please pm me and I will buy it from you. This is perfect for what I need

shaxs said:
It doesnt have to be used on your lap. I would like it to use on the plane when watching movies.
Click to expand...
Click to collapse
I haven't flown in a while... did they increase passenger legroom?

tj!2k7 said:
I haven't flown in a while... did they increase passenger legroom?
Click to expand...
Click to collapse
No, and in an attempt to discourage large people from flying, they're reducing seat width as well. Which brings me to my total OT idea... tickets based on weight!

My Custom NOOKcolor stand

Hey everyone,
I just wanted to post some pics of a stand that I put together. At first I bought one from BoxWave that they had up labeled as a Bamboo NOOKcolor stand.
http://www.boxwave.com/nookcolor-cradles-and-mounts/bamboo-nookcolor-stand/bwpdd/tpt-zfkf
Since I purchased it, they have changed the image on there website, though. Originally it was pretty misleading on the dimensions of the stand. I paid $30 for this thing and really it's only meant for a cellphone. It's absolutely way too small to hold up the NOOKcolor without tipping over.
Anyway, I liked the design of it so I went out and bought a bamboo cutting board from Walmart for $20 and cut it up into a bunch of pieces. I made myself a cardboard template based on that smaller stand I originally bought. I stacked all the pieces and then glued them together. I don't have a band saw so I found this really nice guy who has a shop over at Etsy who agreed to cut it out for me. He really did an awesome job. The link to his shop is here
http://www.etsy.com/people/irishmanswoodworks
in case anyone wants him to make one for you.
After I got it back from being cut out I sanded it up a bit more, put several coats of Tung oil and glued on a piece of felt. I think it came out really nice in the end. I attached some pics, so let me know what you guys think

That looks Amazingly Simple to do.

That is really quite snazzy!

I love it! Great work!

The only wood I'm good at working is ......
LOL tooo easy.
It does look beautiful. Does he use other exotic woods and stains?

I supplied the glued up bamboo board for him to cut, but I'm sure he can make it out of whatever you would want.

What a sweet stand. It looks really nice.

This is exactly what I'm looking for! I use XBMC in my living room and my Nook color is my remote. Thing is it runs out of juice all the time since I keep it on 24/7 and its a pain to charge. I'd like to see you drill a small square hold in the center of the bamboo where it can "dock" and run it out the back USB. Then we can run the usb to the AC outlet/USB Charger and have a Charging Dock!

Thats pretty awsome

Great work!

Best Case *SO FAR* :)

After trying several cases for my Nexus 7, knowing there aren't any specifically for the Nexus 7 at any retail stores, this was the best one I've come across. It will hold me over until an official case comes out (I've kept the receipt so I can return it). I just can't have such an awesome piece of tech sitting around without a case and without the ability to use it as a stand for viewing. The leather is genuine and the case is simply gorgeous. I love the way if holds the tablet without the clamps/rubberized holding mechanism actually rubbing or touching the bezel. All ports are accessible while it is in the case and the power/volume buttons are very easily accessible.
Found it at Fry's this morning on the way to work but it will set you back $59.99. One of the best portfolio stand cases I've ever owned for any of my devices. High end.
http://www.frys.com/product/7190052?site=sr:SEARCH:MAIN_RSLT_PG
Here are some pictures I just took of it from various angles.

iamsupreme said:
After trying several cases for my Nexus 7, knowing there aren't any specifically for the Nexus 7 at any retail stores, this was the best one I've come across. It will hold me over until an official case comes out (I've kept the receipt so I can return it). I just can't have such an awesome piece of tech sitting around without a case and without the ability to use it as a stand for viewing. The leather is genuine and the case is simply gorgeous. I love the way if holds the tablet without the clamps/rubberized holding mechanism actually rubbing or touching the bezel. All ports are accessible while it is in the case and the power/volume buttons are very easily accessible.
Found it at Fry's this morning on the way to work but it will set you back $59.99. One of the best portfolio stand cases I've ever owned for any of my devices. High end.
http://www.frys.com/product/7190052?site=sr:SEARCH:MAIN_RSLT_PG
Here are some pictures I just took of it from various angles.
Click to expand...
Click to collapse
Nice! Any negatives that you can tell aside from price?

brianbrain said:
Nice! Any negatives that you can tell aside from price?
Click to expand...
Click to collapse
None, which is hard to say about most cases. I've always had something I've disliked about a case but have dealt with it. I've also always went for the cheaper the better in the past. This case is truly a "you get what you pay for" case. The way it holds the very edges of the tablet is my favorite part. It looks like it is floating in the case and the parts that hold the tablet in place never really become part of the view. The access to all buttons and inputs as well as the quality of the leather are great. The actual stand aspect allows for infinite viewing angles and never feels cheap, like the stand portion is going to collapse at any moment.

This case looks really nice. I personally want a colored case though and not the standard brown/black. Also, I'd rather pay a bit more for a case that I really like and thats going to last me a while then buy a cheap case that I'm not that into, deciding that Im not satisfied with it and having to buy more. So if I see something that I fall in love with then I don't mind pulling the trigger as long as its not 100+

iamsupreme said:
None, which is hard to say about most cases. I've always had something I've disliked about a case but have dealt with it. I've also always went for the cheaper the better in the past. This case is truly a "you get what you pay for" case. The way it holds the very edges of the tablet is my favorite part. It looks like it is floating in the case and the parts that hold the tablet in place never really become part of the view. The access to all buttons and inputs as well as the quality of the leather are great. The actual stand aspect allows for infinite viewing angles and never feels cheap, like the stand portion is going to collapse at any moment.
Click to expand...
Click to collapse
Nice. It fits perfectly? Usually cases with the plastic clips are pretty picky about what they'll work with. If so, I'm thinking about buying one of these gtab 2 7.0 cases and adding a "smart cover" magnet to it.

brianbrain said:
Nice. It fits perfectly? Usually cases with the plastic clips are pretty picky about what they'll work with. If so, I'm thinking about buying one of these gtab 2 7.0 cases and adding a "smart cover" magnet to it.
Click to expand...
Click to collapse
Here's how well it fits Very securely! I'm actually shaking the case while I hold it upside down. Talk about making your heart jump a bit!

are you sure? I tried the same case and it doesn't fit too well, but its the best one
the corners are still lodged

iamsupreme said:
Here's how well it fits Very securely! I'm actually shaking the case while I hold it upside down. Talk about making your heart jump a bit!
Click to expand...
Click to collapse
haha, very nice. I may have to see how some of the gtab 2 7.0 cases fit myself. Nice to see you also brought your new baby to work with you today :good:

darthchilli said:
are you sure? I tried the same case and it doesn't fit too well, but its the best one
the corners are still lodged
Click to expand...
Click to collapse
I just pulled the edges on the 4 rubber ends out slightly, if that makes sense, and when the tablet was in place, they wrapped perfectly around each corner of the tablet. It takes a tiny bit of "fitting", but once it's on, it's all good.

brianbrain said:
haha, very nice. I may have to see how some of the gtab 2 7.0 cases fit myself. Nice to see you also brought your new baby to work with you today :good:
Click to expand...
Click to collapse
I had to bring it to work! It definitely is my new baby. Tethered 4G connection from my Galaxy Nexus Streaming music while getting my work on.

Sexy! The case too!
Thanks for sharing, that case looks made to order on the Nexus 7. :good:

How about the speaker in the back, is it covered or are there holes for it?

There are no holes for the speaker. I did a test at max volume and I have no idea why but it sounds louder with it in the case then out of the case. It could be the way it's configured with the speaker near flush but with a decimeter or so gap. I know with my phones and tablets that they tend to sound louder when they are angled near a wall and I seem to get the same effect with this case.
Sent from my Nexus 7 using xda app-developers app

iamsupreme said:
There are no holes for the speaker. I did a test at max volume and I have no idea why but it sounds louder with it in the case then out of the case. It could be the way it's configured with the speaker near flush but with a decimeter or so gap. I know with my phones and tablets that they tend to sound louder when they are angled near a wall and I seem to get the same effect with this case.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
A decimeter is 10 centimeters...

mewantnexus7 said:
A decimeter is 10 centimeters...
Click to expand...
Click to collapse
Okay. My point is that it's less than a centimeter. Maybe a millimeter or so. Enough tiny space to actually amplify the sound
Sent from my Nexus 7 using xda app-developers app

rediculous price! that's 25% of the tablet. I've seen much better looking case off amazon.

qpqpqp said:
rediculous price! that's 25% of the tablet. I've seen much better looking case off amazon.
Click to expand...
Click to collapse
Link? Cause I haven't seen any. All those cheap amazon cases look cheap and tacky IMO.

http://www.amazon.com/gp/aw/d/B0083...4&linkCode=as4&ref_=as_li_ss_til&tag=noref-20
i bought this elcheapo case for now, at least they have 2 day prime shipping

This case is very similar to the one you bought, but is significantly cheaper.
http://www.yourpoetic.com/p/157/hardback-samsung-galaxy-black
The company has a case specifically for the N7, but no pictures of the N7 in a case. I'm guessing their N7 is waiting to be delivered too. Haha. Anyway, I really like the floating look, and will probably be getting this one.

masterofmayhem said:
This case is very similar to the one you bought, but is significantly cheaper.
http://www.yourpoetic.com/p/157/hardback-samsung-galaxy-black
The company has a case specifically for the N7, but no pictures of the N7 in a case. I'm guessing their N7 is waiting to be delivered too. Haha. Anyway, I really like the floating look, and will probably be getting this one.
Click to expand...
Click to collapse
People on other threads have been linking to Cases listed on Amazon and Ebay with that very similar look (they probably all use the same stock photos) with prices ranging from $10 to $20. Even cheaper.
http://www.amazon.com/MoKo-Slim-fit...?s=electronics&ie=UTF8&qid=1342489646&sr=1-12
http://www.amazon.com/i-Blason-Google-Tablet-Leather-Orange/dp/B008H3PAP2/ref=reg_hu-rd_add_1_dp
http://www.amazon.com/Poetic-HardBa...turer/dp/B008IEGS9W/ref=sr_1_24?s=electronics
I don't know, may be not the same quality but it's hard to judge from photos, or even the prizes.
Only way to judge is hand-on experience like the OP's case, his case looks good also because when the back holds on to four corners only, whereas these ones are a bit 'uneven' (when viewed in portrait mode) : p
I would perfer something that holds on to the edges of Nexus 7 only, like the Official Case or this:
http://www.amazon.com/MoKo-Folding-...ction/dp/B007SA0F7S/ref=sr_1_22?s=electronics