I saw this the other day and meant to share it. Looks like xoskins got a hold of a tab 10.1 They posted pics of it here galaxy tab 10.1 io limited edition screen protector and full body protector pics
and the link to the one on their site Galaxy Tab 10.1 IO Protector
Related
I will order a Galaxy Tab P1000 soon and I plan to buy an anti-glare screen protector with it. I've found the Momax Anti-Glare Screen Protector for Samsung Galaxy Tab pretty interesting but it is quite expensive.
I wonder if it's worth 3 times other screen protectors cost. Has anyone used it?
tudorc11 said:
I will order a Galaxy Tab P1000 soon and I plan to buy an anti-glare screen protector with it. I've found the Momax Anti-Glare Screen Protector for Samsung Galaxy Tab pretty interesting but it is quite expensive.
I wonder if it's worth 3 times other screen protectors cost. Has anyone used it?
Click to expand...
Click to collapse
Any updates on this?
dunno about that one, i just purchased a pack of 3 cheap screen protectors in matt - wasted 2 of them as they didnt go on to well but the third one went on a treat and now i can see the tab in bright sunlight using sat nav, also no more constant cleaning prints of the screen.
some dont like the washed out effect from matt screens - but for me it makes the machine usable.
I have been looking at cases for my Galaxy Tab 3 10.1 wifi specifically the otterbox and I have only found ones for the Galaxy Tab Pro 10.1 and Note 10.1. Will these work? From the pictures everything looks to be in the same position. I;m not sure what to do, right now I have the Samsung book cover case that flips, but its annoying and doesn't really protect it.
railinandnailin said:
I have been looking at cases for my Galaxy Tab 3 10.1 wifi specifically the otterbox and I have only found ones for the Galaxy Tab Pro 10.1 and Note 10.1. Will these work? From the pictures everything looks to be in the same position. I;m not sure what to do, right now I have the Samsung book cover case that flips, but its annoying and doesn't really protect it.
Click to expand...
Click to collapse
hi,
get exact measurements down to the millimeter. never go just by the picture.
the note 10 [old] which i have is almost half an inch wider the the tab 3 10 which i also have.
m
trident aegis
railinandnailin said:
I have been looking at cases for my Galaxy Tab 3 10.1 wifi specifically the otterbox and I have only found ones for the Galaxy Tab Pro 10.1 and Note 10.1. Will these work? From the pictures everything looks to be in the same position. I;m not sure what to do, right now I have the Samsung book cover case that flips, but its annoying and doesn't really protect it.
Click to expand...
Click to collapse
I had the same problem. I got the Trident Aegis case, and it is made just like an ottorbox. I had an ottorbox on my old dell streak, and finally gave up on them producing one for my tab 3 10.1, so I got the trident. It is made really good. Same design ....better in some ways. It works too, my wife tests it's impact qualities all the time. (Butterfingers)
Hello Guys,
I am waiting for my s6 Edge which will be arriving next week and i'm super pumped. So as you my suspect, i have gone through a lot of review videos and articles on the phone's performance and accessories and stuff. One thing i hadn't considered until yesterday was installation of a screen protector. So I looked up tempered glass screen protectors and think they are really cool.
My question is the look of the phone if/when i decide to remove the tempered glass screen protector to install another one or continue life without one. Any one got any link to a video illustration of this or any article...or your own experience ?
As most of you or each one would agree the s6 Edge is a good looking phone and maintaining the beautiful look is on all our minds.
Phone will look the same upon removal. There aren't any worthwhile tempered glass options for this device
Sorry ,i am using a general screen protector...i think glass protector is too thick.
if you wanna a general one , i will recommend you a good screen protector..
yes, Samsung Galaxy S6 Edge looks cool , Have you ever considered the colorful glass screen protector?
I am using a tempered film now. But only for several days.
I have been planning to utilize my Tab S6 for drawing, so when I ran across this item on Amazon:
"MOBDIK Screen Protector for Samsung Galaxy Tab S6/Tab S5e Paper Like, 2 Pack Paperlike Galaxy Tab S6/Tab S5e Anti Glare Matte Screen Protector with Easy Installation Kit Paper Texture Galaxy Tab S6 Screen Protector"
I thought I would give it a shot.
It 'fits' the tab S6 screen for the most part (seems a teensy-bit large), and the camera cutout is okay. It feels very different to draw on with the S Pen, just as it is designed to do. The difficulty I am noticing is that my fingerprint (registered prior to installation of the screen protector) no longer 'reads' properly. I then set out to register a 'new' fingerprint (i.e. the same one, only with the protector in place), and it now works only sporadically. This has led to more than one "Please wait 30 seconds before attempting to access the tablet again" sort of message.
Has anyone had experience with this type of screen protector? I am certain it is installed properly and, to be honest the fingerprint issue is really the major issue.
Are there other screen protectors of this type anyone could recommend? Or do they all have this problem?
Thanks in advance,
Angelo D.
Zathras42 said:
I have been planning to utilize my Tab S6 for drawing, so when I ran across this item on Amazon:
"MOBDIK Screen Protector for Samsung Galaxy Tab S6/Tab S5e Paper Like, 2 Pack Paperlike Galaxy Tab S6/Tab S5e Anti Glare Matte Screen Protector with Easy Installation Kit Paper Texture Galaxy Tab S6 Screen Protector"
I thought I would give it a shot.
It 'fits' the tab S6 screen for the most part (seems a teensy-bit large), and the camera cutout is okay. It feels very different to draw on with the S Pen, just as it is designed to do. The difficulty I am noticing is that my fingerprint (registered prior to installation of the screen protector) no longer 'reads' properly. I then set out to register a 'new' fingerprint (i.e. the same one, only with the protector in place), and it now works only sporadically. This has led to more than one "Please wait 30 seconds before attempting to access the tablet again" sort of message.
Has anyone had experience with this type of screen protector? I am certain it is installed properly and, to be honest the fingerprint issue is really the major issue.
Are there other screen protectors of this type anyone could recommend? Or do they all have this problem?
Thanks in advance,
Angelo D.
Click to expand...
Click to collapse
If it's a matte o textured Screen Protector then it's probable applying some distortion to the screen causing the optical fingure print read to not work right. Just re-egister and you'll probably be fine.
Zathras42 said:
I have been planning to utilize my Tab S6 for drawing, so when I ran across this item on Amazon:
"MOBDIK Screen Protector for Samsung Galaxy Tab S6/Tab S5e Paper Like, 2 Pack Paperlike Galaxy Tab S6/Tab S5e Anti Glare Matte Screen Protector with Easy Installation Kit Paper Texture Galaxy Tab S6 Screen Protector"
Angelo D.
Click to expand...
Click to collapse
I had no idea something like this exists! I too will be be drawing and 'painting', so this sounds great. Thanks for sharing.
I had a similar issue after installing a glass screen protector. I re-registered my thumbprint, and it helped some, but what really fixed it for me, is, I registered the same thumb in all three fingerprints. So now it almost always recognized it as one of the three, and unlocks the tablet.
Skinomi has matte protectors. I've used them in the past, don't get the horrible pen drag and indenting like on glossy protectors. But after having to remove one because of damage I decided to go back to glass protectors because of the rainbow sparkle effect the matte protectors cause, very noticable on white. Didn't bother me at first it or when using it, but after seeing the screen bare it was too hard to go back. So my advice, don't remove it if you go this route.
I bought this one:
BERSEM Screen Protector for Samsung Galaxy Tab S6/Tab S5e Paper Like, 2 Pack Paperlike Galaxy Tab S6/Tab S5e Anti Glare Matte Screen Protector With Easy Installation Kit Paper Texture Galaxy Tab S6 Screen Protector https://www.amazon.com/dp/B07WLKFKNP/ref=cm_sw_r_cp_taa_qXQKDbSEZCVDZ
Works fine with the fingerprint sensor. But, I did have to change to the gray pen tip, as it was wearing down the standard soft white tip too quickly.
I'm looking for a good glass screen protector that does not effect the clarity of the screen too much (dry application) also would like the finger scanner to still function correctly anyone got any suggestions for what they are using on there tab s6 ?
I'm thinking about getting the olixar glass one
(2 Pack) Supershieldz for Samsung Galaxy Tab S5e / Tab S6 (10.5 inch) Screen Protector, (Tempered Glass) Anti Scratch, Bubble Free https://www.amazon.com/dp/B07NXNMSDS/ref=cm_sw_r_cp_taa_K1IODbP1H8H97