Database Develop

[Q] USB No longer Working.......?

My Samsung Captivate was working fine a day ago when I was transferring video off of it to my PC. Now this comes up and I'm like WTH lol. I've never dropped my captivate or damaged it( to my knowledge).
I have read in other posts that the only way to fix this is to replace the mini usb port inside of the phone... If that is true could someone direct me to a site that sells it?
Or is It a battery issue? because It now has a problem with showing the charging battery symbol when its not charging now...
I also thought about going to At&T and letting them tell me what they think, only thing i'm afraid of is that without me being able to flash back to Official 2.1 Eclair they wont help me...
Any suggestions guys?

Bump T_T............

lol, make it totally bricked, att will not see if the phone cannot turn on.

Have you tried switching computers? My laptop stopped reading my phone, but my desktop picked it up just fine.

Try factory reseting and flashing to a new rom
Sent from my GT-I9000 using XDA App

Well I would Flash it to stock, but how would I do that without the use of USB, because no computer can detect my phone as it is now.... the USB Port is damaged I believe.
As for Bricking it how can I do that because they told me I could replace it because I'm under warrenty, but they also told me that if its found out of warrenty that they may charge me upwards to 480 bucks for the replacement. The guy on the phone told me it only applied to cosmetic and liquid damage though, he didnt mention stuff like flashing the OS or modding.
This is strictly a Hardware Issue as it was working 2 days ago.

lol, you can easily brick your phone by doing the following:
1. download a rom;
2. go to recovery mode;
3. start flashing the rom and remove the battery during the process;
never help people like this ... i feel guilty ...

lol ikr? Never thought I'd ever ask that xD.

Can you plug your phone in to the wall charger and it charge. When you plug.it into.the PC are you getting a message about USB device not recognized. Are you using a.deshktop or a laptop what OS. If you are using a desktop are you using a port on the back preferrably the one closest to the motherboard. These are all things to take into account.
If when you plug it into the wall.or computer your phone will charge then most likely there is nothing wrong with your micro-usb on the phone. Instead its the computer. I had the same issue and had to fight with it for days but now it works everytime I plug [email protected]
Sent from my SAMSUNG-SGH-I897 using XDA App

I am using windows on my laptop and Fedora linux on my netbook and I have tried to connect all of them to it and it failed and they all had the latest drivers and my usb development and all that stuff is as it should be.
like i said in the OP it was working 2 days ago perfectly and I did nothing to change it or damaged it in any way ( to my knowledge) maybe the usb port got messed up when i tried to charge it but I can still get a charge but the battery keeps showing its charging even when it is off of the charger.

Izurin said:
I am using windows on my laptop and Fedora linux on my netbook and I have tried to connect all of them to it and it failed and they all had the latest drivers and my usb development and all that stuff is as it should be.
like i said in the OP it was working 2 days ago perfectly and I did nothing to change it or damaged it in any way ( to my knowledge) maybe the usb port got messed up when i tried to charge it but I can still get a charge but the battery keeps showing its charging even when it is off of the charger.
Click to expand...
Click to collapse
only way to really know is by flashing another rom... use your mobile browser not xda app, and go to xda, find a rom thread, and use the mobile browser to download the rom over 3g... reboot into recovery to install it, it will be in the download directory on your internal SD...

Well I would do that but Now I have another problem... it turned off and now it wont turn back on!!!! UGGGGGGGGGGGGGGH!!

Izurin said:
Well I would do that but Now I have another problem... it turned off and now it wont turn back on!!!! UGGGGGGGGGGGGGGH!!
Click to expand...
Click to collapse
anything from the charger? might bee good that it finally died... the att service center should swap it out for you now that its dead...

Well I thought I should Follow up on my Question... Somehow I got my Samsung Captivate to magically connect to my PC and believe me it was very Wonky. And Soon as my PC detected it I hurried and Downloaded Odin for Stock 2.1 and Put my Captivate in download mode using Cognition's Download mode option in the hold button popup on screen.
Long story short I was finally able to get my captivate back to 2.1 and the reported problem still exists... I'm calling ATT right now for my replacement that should be here in 2 days ^_^
Thanks Again to all the people here at xda for your help, I deeply appreciate it!

place dg cf7 on sd card via another phone or use an alternate browser to download it also get clockwork mod rec.zip and boot into recovery install from there, thats how I got back to stock after same problem as you,warranty phone.
worked for me

[Q] Problem with computer recognizing phone?

After much searching and work on fixing my bricked captivate, i broke down and bought a jig from mobiletechvideos.com. It works perfectly as intended, except for the fact that my pc is not recognizing the phone after it enters download mode. As a side note, i may have royally screwed up when i did something in clockwork recovery, where now i cant even get past the ATT World phone boot screen. Im afraid i may have deleted anything that can mount the phone to the pc. I have already installed the proper drivers, I think. Anything i can do to fix this?

So it shows the world phone screen a bunch of times? Plug it into an outlet see if the green battery comes up, just wait for it, the Gray battery will do a short of loop a few times... Once its at the green battery try to turn the phone on, be patient too, if you get the phone on, go to settings> privacy then factory data reset, make sure you backup to external or computer first
Your welcome
Now you say/press thanks
Teaching manners one person at a time

Thats not gonna work... nothing i know of can be done to it. it doesn't move past the att screen. No animation, not sound. Just ATT World Phone. i can get into download mode, but cant connect to computer. Thats the problem right there.

Try restarting your computer? I've had similar issues on a yucky iPhone, and I've read about other Captivate users with it as well, and a restart helped resolve the problem.

Go under your drivers and uninstall them and reinstall them it helped when I finally had got mine "back to his construction job" (lol download mode) it should then work
Sent from my SAMSUNG-SGH-I897 using XDA App

Ive already tried another PC and Uninstalling and reinstalling the drivers to no avail.
It just like the phone isn't even there. It will charge, but wont mount to the PC.

Not trying to insult your intelligence or anything (I might actually be insulting my own) but you have Odin open, right?
Just trying to think of anything lol

Yeah, but it wouldnt matter anyway if the computer doesnt know its there.

Try cleaning the mini usb port. Or switch the usb cord connector the samsung factory one tends to break the data + and -.
As for not getting past the at&t screen. The kernel you installed cannot read the system partition probably corrupted or the kernel you installed cannot read ext4.
If you cannot get it to be recognized send it back to your carrier for repair, should be under warranty.

Thats what im doing now. Thanks for the help, though.

Palen222 said:
After much searching and work on fixing my bricked captivate, i broke down and bought a jig from mobiletechvideos.com. It works perfectly as intended, except for the fact that my pc is not recognizing the phone after it enters download mode. As a side note, i may have royally screwed up when i did something in clockwork recovery, where now i cant even get past the ATT World phone boot screen. Im afraid i may have deleted anything that can mount the phone to the pc. I have already installed the proper drivers, I think. Anything i can do to fix this?
Click to expand...
Click to collapse
You sure you have the proper drivers installed for your phone? The links for them are on the odin forum in captivate development
Sent from my SAMSUNG-SGH-I897 using XDA App

[Q] Stuck booting into Download mode

Okay, so as far as I am able to find... This problem is pretty unique...
I'm running Cognition 4.5.3 with no software issues. I have had this problem since Cog 3...
Most people have trouble getting their phone to boot into download mode, but NOT ME!
My phone randomly (I can find absolutely no cause or trigger and I'm not really a novice at Android) will shut itself off. Now normally I would not have an issue with this, but when I go to turn the phone on... it boots straight to download mode, and no key combo or anything will avoid it. So I have been testing this out and I can reboot the phone from the enhanced power menu, I can boot into Recovery from enhanced power menu... But when the phone shuts off or when I shut it down, the ONLY way that I can get it to power on correctly, is to plug the phone in and wait for it to show that the phone is charging. Then I can power it on normally...
Now, this issue arose the same time that my phone began to refuse to be recognised when plugged into a computer via USB... and at times the USB debugging and USB connected notifications will remain in the notification bar until I reboot the phone...
Naturally, my first instinct was to try and restore to stock... But since no computer will recognize my phone (even with fresh drivers installed) I cannot use odin to flash to stock.
So to summarize my problems:
1. My phone will not be recognized by a computer. (USB device not recognized)
2. My phone randomly shuts itself off. (Not a big deal, I can live with that)
3. My phone ONLY boots into download mode unless plugged into the charger (Incredibly frustrating when I am not at home or I don't have my car charger)
4. USB debugging and USB connected notifications stick around until phone is rebooted. (Using enhanced power menu. Again, I can live with this minor annoyance)

have you tried reflashing that rom...or trying another?
it could be the random shutdown issue that some cappys have paired with a failing usb port.
try changing roms.

studacris said:
have you tried reflashing that rom...or trying another?
it could be the random shutdown issue that some cappys have paired with a failing usb port.
try changing roms.
Click to expand...
Click to collapse
Hehe... I tried a different rom for two weeks and had similar and/or more problems...
Reflashing doesn't help either.
I've tried my best to troubleshoot this on my own, so I'm not shutting down your attempt to help. Just letting you know I have tried it.
I hadn't heard about a failing USB port problem... I'll read up on it.
Thanks for your help!

Atleast you dont have to worry about soft bricks if it auto boots into download mode

d34thp1ng said:
Atleast you dont have to worry about soft bricks if it auto boots into download mode
Click to expand...
Click to collapse
Actually I do...because USB still won't interface...
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

like i said could be a short or something in the usb port...or somewhere in the hardware. if you experience this problem across different software then it has to be a physical defect someplace. cause if it were software related it would fix once you flashed something different...
you can try for a warranty replacement, that requires a little loose morals. you will have to do something to cause it not to boot, or only boot to the at&t screen otherwise they will have proof of root and/or custom rom and void your warranty. once thats accomplished mention some crap about kies failing and they should replace it.

studacris said:
like i said could be a short or something in the usb port...or somewhere in the hardware. if you experience this problem across different software then it has to be a physical defect someplace. cause if it were software related it would fix once you flashed something different...
you can try for a warranty replacement, that requires a little loose morals. you will have to do something to cause it not to boot, or only boot to the at&t screen otherwise they will have proof of root and/or custom rom and void your warranty. once thats accomplished mention some crap about kies failing and they should replace it.
Click to expand...
Click to collapse
Hmmm... a few months back my original USB/Charging cable broke and for a couple of days I was forced to use a generic MicroUSB cable to charge my phone... Could that have cause a short/damage to the port?
My phone does not have warranty as I bought it refurbished. :'(
(Plus my morals aren't that loose.)

Had a similar issue, eventually determined that it was a short in this usb port and did a warranty return. (Only when plugged in could I turn on, etc.)
If that isn't an option for you, you could try flashing CM. For some reason, the cyanogenmod build won't let the phone charge when off. ( Automatically powers back up once the juice flows.)
I flashed a nightly and somehow, magically, my phone would power back up normally ( but wouldn't turn off, unless plugged in without power. So strange!)
Even more weird? I flashed back to stock and the new powering and rebooting stuck. The short wasn't fixed, my phone simply seemed to reverse the problem.
Plus, you would be using cm.
Sent from my SGH-I897 using XDA App

tbrass said:
Had a similar issue, eventually determined that it was a short in this usb port and did a warranty return. (Only when plugged in could I turn on, etc.)
If that isn't an option for you, you could try flashing CM. For some reason, the cyanogenmod build won't let the phone charge when off. ( Automatically powers back up once the juice flows.)
I flashed a nightly and somehow, magically, my phone would power back up normally ( but wouldn't turn off, unless plugged in without power. So strange!)
Even more weird? I flashed back to stock and the new powering and rebooting stuck. The short wasn't fixed, my phone simply seemed to reverse the problem.
Plus, you would be using cm.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
Thanks! You guys have pretty much answered my questions...
I don't want to leave my nice DG Rom though.
Since I have determined that it is a hardware problem... I think I'm just going to live with it for a few more weeks until I can afford to go ahead and buy the newer build of the Cappy... (Might even wait until the SGSII comes out.)

You should be able to get warranty replacement, just make sure the device is in a stock condition when you take it in!

tbrass said:
You should be able to get warranty replacement, just make sure the device is in a stock condition when you take it in!
Click to expand...
Click to collapse
Even though I purchased the device as a refurbished device?
The only problem is that I can't Odin back to stock...

Cease1 said:
Even though I purchased the device as a refurbished device?
The only problem is that I can't Odin back to stock...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=995143&highlight=safely+to+stock
this will get you to stock then look in forums for how to change boot animation change that to stock boot logo and your good to go i did read some were you could do boot img all on phone i belive. i cant find thats up to u

Okay so I called them and let them know what the phone was doing and they tried to send me to samsung to have them repair the phone...

I now hold in my hands a shiny new 1102 build Cappy... Took it to my local device service center and explained the random shutdowns and the booting into download mode and they replaced it no questions asked!
Now to get Cog 5b2 on here.

[Q] PROPERLY BRICkEd SAMSUNG GALAXY S I9000's ONLY - (no screen response)

hi iv had a serious journey with my sgs i9000 here's how it goes:
i had it on 2.2 and then upgraded it officially to 2.3.3
not much else happened until i realised i wanted voodoo sound (apparently it was hyped to be awesome....its not that great) and neither is the ext4 file system 2.3.3 seems to be just as fast...dont know if it was a major problem on 2.2 but it aint really on 2.3.3
so i flashed voodoo on 2.3.3 from some website ... downloaded the app for the sound as the kernel didnt support that...
then i was using it and played around with the settings in clock work manager and i mounted and unmounted sd/card i dont think it made much difference but i thought i'd mention it ... the reason i did this is because when i tried to load a rom it wouldnt find all my sd card files beyond like the first 5 folders so i thought i'd give it a kick start....
then what happened is the phone just went off and i couldnt get it back on.... little did i know this was soft brick... i didnt know why....
i got the computer screen with the phone and exclamation mark.... i got into download mode a few times....
NOW .... i cant get it to turn on AT ALL using any combo buttons....
i think the nail in the coffin was flashing it with the "one-click odin" which was for the captivate but it said i could use it on the i9000 too.... which blatently screwed up the device....
anyway iv ordered a jig device... if this gets me into download mode ....what am i supposed to do...?
also is there anything i can do to get it into download mode now ? (bearing in mind iv done all the combo's ... some people say leave the battery out for a couple of minutes or half an hour....)
i think the bootloader is screwed up because it doesnt switch on....
even after i did a clean install of 2.3.3 with the pda phone and csc roms... it still just randomly switched off after 2/3 minutes of boot time....
what do i do now ?
samsung repair centre said they couldnt do anything and i'd have to send it back to samsung.... is it that bad?

Tried all the combos.... So you tried plugging in combo, then battery and also holding combo and then battery without cable in...
Have you read the pinned thread in general i think it is regarding, bricks?
Moving on
how did you do a clean install of 2.3.3 if you couldn't get DL mode??
Haven't read into the one click Odin so can't comment on that, but i think that was meant to be for softbricks...
anyway regarding the jig, just plug it in, and then wait a second or so, of not a minute (usually instant) and it should go into download mode. If it doesn't work again try some combos with the jig in...
If it is a hard brick i think you need to J-tag it, or yes take it to samsung in which case they may charge you for a repair, unless you say kies did it, and you didn't tell them everything you didi when you spoke to em.
Think thats everything lemme know if i missed out a question of yours or you want something better explained etc..

yeah i guess i was vague on the combo thing...
i've tried:
a) holding power, menu and volume down while sliding battery in (no usb cable in )
b) same as above with usb cable in
c)just menu and volume down buttons while i put battery in
d) both volume buttons and cable in
e)both volume buttons and battery in
.... the reason for d and e is because when i flashed it with the one click odin installer thing.. it restarted and showed a a t&t screen so i think its flashed the software with a samsung capacitive rom....so in theory i need to use those buttons ? not sure .... yet more questions....
i just hope this jig thing works ... btw do i have to pay sammy is my phone is under warranty?
how do i reflash the bootloader so it works properly? is that even the problem? do i need to do that? which pit file do i use ? some people say 512.... some say thats outdated and the new pit file is the thing to use .. ?
Talon26 said:
Tried all the combos.... So you tried plugging in combo, then battery and also holding combo and then battery without cable in...
Have you read the pinned thread in general i think it is regarding, bricks?
Moving on
how did you do a clean install of 2.3.3 if you couldn't get DL mode??
Haven't read into the one click Odin so can't comment on that, but i think that was meant to be for softbricks...
anyway regarding the jig, just plug it in, and then wait a second or so, of not a minute (usually instant) and it should go into download mode. If it doesn't work again try some combos with the jig in...
If it is a hard brick i think you need to J-tag it, or yes take it to samsung in which case they may charge you for a repair, unless you say kies did it, and you didn't tell them everything you didi when you spoke to em.
Think thats everything lemme know if i missed out a question of yours or you want something better explained etc..
Click to expand...
Click to collapse

ok now iv got it to turn on quite regularly .... but it keeps cycling (bootlooping) the at&t logo screen .... cant get into download mode or recovery mode.... just keeps boot looping.... oh and when i plug in the usb cable it just turns off.... its like i cant start it up with a usb in the phone...
update: been reading around and if anyone has this problem.... it looks like you might be hard bricked and apparently this cant be resolved via jig device..... dammit ...i'll still try and update the post... peace

So you haven't tried the jig yet?? because you haven't got it yet right
I don't think the device is bricked at all. Bricked usually means you have no response from it, so no matter what combo, actions you take you get no reaction.. However you are getting a boot although there is something going wrong as it does so...
So yes you need a new bootloader, i think every rom that you flash through odin has one, but i guess it may not, its best to search this, but i have read a few posts that say you need to click on update bootloader (i would check into this, as if this is wrong it will definitely brick your device)
My suggestion is go back to the onclick odin thing as that should do it, im sure someone has done something similar.
Yh so to sum up, i would have high hopes for a restoration (but what so i know ) and yes flashing a new bootloader with rom i reckon would do the trick. I think a stock rom will do it. Click on the stock rom link below and type in a few search terms in that thread to see if you pick up anything otherwise do a slightly wider one of the forum.

Talon26 said:
So you haven't tried the jig yet?? because you haven't got it yet right
I don't think the device is bricked at all. Bricked usually means you have no response from it, so no matter what combo, actions you take you get no reaction.. However you are getting a boot although there is something going wrong as it does so...
So yes you need a new bootloader, i think every rom that you flash through odin has one, but i guess it may not, its best to search this, but i have read a few posts that say you need to click on update bootloader (i would check into this, as if this is wrong it will definitely brick your device)
My suggestion is go back to the onclick odin thing as that should do it, im sure someone has done something similar.
Yh so to sum up, i would have high hopes for a restoration (but what so i know ) and yes flashing a new bootloader with rom i reckon would do the trick. I think a stock rom will do it. Click on the stock rom link below and type in a few search terms in that thread to see if you pick up anything otherwise do a slightly wider one of the forum.
Click to expand...
Click to collapse
jig arrived today! .... i plugged it in ..... NOTHING ..... (read on theres more to the story!!!)
so i put it in nothing happened...... i thought maybe the jig device was not working so i tried it in the i9100 (s2) .... WORKED ...!
im really stubborn so i needed to make mine work too..... i read in a review of the jig device that someone bought one and it hadnt worked .... i hadnt ruled that out
anyway all day i just kept trying to jump start it by putting in the wall charger in and out ... i usually get some reponse from that....nothing apart from a second of something like a loading circle......
anyway then i left it on charge for an hour ....maybe the battery was dead and then tried again ....
(btw i was getting no response at all at this stage, not even the at&t thing ...)
so it was pure black screening me.....
then i got home from work and thought let me exchange the battery and see what happens....
i changed the battery and put the jig device in ...... VOILA !!! download mode....
all is well so far i've flashed with 2.3.3 pda,phone and csc files and checked repartition... i haven't messed with the bootloader option
seems to be working ok....also gave it a restart too ... last time it got to this point but it didnt turn back on after a restart ....
in conclusion .... charge battery fully externally (putting the power in the phone in this state was not charging it)
then with a full battery put jig in .... if that doesnt work you phone might be seriously bricked.... bravo to whoever dreamt up the jig device

Glad to hear the great news!

Nice
Thanks for this useful info

[Q] Samsung Galaxy S 100% unresponsive after Odin flash..

Oh dear...
I was experiencing the PHONE-->Triangle-->PC logo problem after a flash with odin went 'wrong' with my galaxy S phone.
I followed the guide here to solve it:
http://forum.xda-developers.com/showthread.php?t=981343
And as a result flashed my phone with the stock firmware from this file:
T959UVKA6_REV05_home_low_CL860813.tar
ODIN successfuly reported a green 'Success' Screen, so i disconnected the phone and tried to power it on. But the device is completely 100% unresponsive.
Nothing happens when i plug it into the PC, nor when i charge it from the mains.
I've searched and tried loads of suggestions from this and other forums, solutions including:
1. Removing battery, holding both VOL keys down, plugging into PC.
2. Holding normal HOME, VOL+, Power key. and HOME, VOL-, Power Key...
The problem is, i cannot get the galaxy s to respond to ANYTHING. So there is no way i can get into the download screen to re-flash.
Can anyone lend any advice to me about this issue? Is the phone totally dead now?
I read things about a JTAG? or somesuch cable, but these cables appear to only work as long you can get the "downloading" screen to work.
I don;t want to throw my phone away. Can anyone help?
Thanks

Could you tell us why the dirst flash went wrong ?
Sent from my GT-I9000 using Tapatalk

doctor_vai said:
Could you tell us why the dirst flash went wrong ?
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
The first flash went 'wrong' becuase ODIN kept getting stuck at the setupconnection stage.
I learnt that removal of the SDCard and SIMCard was the route to fix this, but having fixed it, i flashed it with the stock ROM as detailed in the first post.
Thanks

Hi.
Firstly. If the phone will not response if you put the charger on it the bootloader seems to be dead.
Maybe a possibility would be to use a "USB jig"
Thats not the JTAG!!
JTAG is a develover device for flashing and only the samsung support will have such jtags.
JIG (for USB) is a resistor soldered to the usb connector.
You can buy that usb jig in amazon, ebay or do it yourself.
May you can switch the phone into download mode with it. But no guarantee..

GalaxyKnight said:
Hi.
Firstly. If the phone will not response if you put the charger on it the bootloader seems to be dead.
Maybe a possibility would be to use a "USB jig"
Thats not the JTAG!!
JTAG is a develover device for flashing and only the samsung support will have such jtags.
JIG (for USB) is a resistor soldered to the usb connector.
You can buy that usb jig in amazon, ebay or do it yourself.
May you can switch the phone into download mode with it. But no guarantee..
Click to expand...
Click to collapse
Thank you GalaxyKnight...
i've just bought a USB jig on ebay for £1.25, hopefully it works.
I'd rather not have to throw the phone away.

mcai8rw2 said:
Oh dear...
I was experiencing the PHONE-->Triangle-->PC logo problem after a flash with odin went 'wrong' with my galaxy S phone.
I followed the guide here to solve it:
http://forum.xda-developers.com/showthread.php?t=981343
And as a result flashed my phone with the stock firmware from this file:
T959UVKA6_REV05_home_low_CL860813.tar
ODIN successfuly reported a green 'Success' Screen, so i disconnected the phone and tried to power it on. But the device is completely 100% unresponsive.
Nothing happens when i plug it into the PC, nor when i charge it from the mains.
I've searched and tried loads of suggestions from this and other forums, solutions including:
1. Removing battery, holding both VOL keys down, plugging into PC.
2. Holding normal HOME, VOL+, Power key. and HOME, VOL-, Power Key...
The problem is, i cannot get the galaxy s to respond to ANYTHING. So there is no way i can get into the download screen to re-flash.
Can anyone lend any advice to me about this issue? Is the phone totally dead now?
I read things about a JTAG? or somesuch cable, but these cables appear to only work as long you can get the "downloading" screen to work.
I don;t want to throw my phone away. Can anyone help?
Thanks
Click to expand...
Click to collapse
Hm why did you flash Vibrant firmware? If you don't have vibrant of course it doesn't work..and if it contained bootloaders your phone is probably hard bricked (assuming vibrant had different bootloaders from i9000). But if you only flashed ROM then you have good chances of recovering it with jig..let's hope it works
Sent from my CM'd SGS

Does a "hard brick" mean it is proper dead?
I could have sworn i got that last firmware file from a samsung galaxy s forum?!
When flashing with proper firmware ("Cyanogen") will the flash re-write/fix the bootloaders? Or to put it another way... what options do i need to select in Odin?
Thanks

Jig Doesn't Work
Hi... sorry to self bump like this.
I bought a JIG off ebay, plugged it into the phone and sadly the phone did nothing.
Does that mean that the phone is ultra-dead, and there is NO HOPE?
I don;t want to throw it away mommy!
Could the battery be flat?
***Edit - I used the jig on a friends Galaxy S and the phone went into download mode ok. But it does not on mine.
If windows doesn't even recognise the device in any capacity at all... doesn't that mean Game Over? Surely any solution now would still require windows to see the device?

mcai8rw2 said:
Hi... sorry to self bump like this.
I bought a JIG off ebay, plugged it into the phone and sadly the phone did nothing.
Does that mean that the phone is ultra-dead, and there is NO HOPE?
I don;t want to throw it away mommy!
Could the battery be flat?
Click to expand...
Click to collapse
was there any sign of life from the phone before?
Sent from my GT-I9000 using xda premium

If you have a i9000, that's not a vibrant, and I think that rom you flashed probably contains bootloaders (since it's meant for recovery). Did you select phone bootloader update in odin?
You could try borrowing a battery/charging the one you have, it might be flat, hence why you can't turn on the phone at all. (Maybe vibrant bootloaders have some similarities). Also try check if vibrant has alternate ways of getting to download mode
Lastly, try http://forum.xda-developers.com/showthread.php?t=1330491

Thank you
I have tried using the JIG on a battery that is full, and i still get zero response from my phone.
The link you gave me looks at first glance to be quite complex, but seeing as it is dealing with hardware, it looks like it might work.
Cheers
J

If you open the firmware file with 7Zip, you'll be able to check if it contains bootloaders. Look for bootloader.bin and sbl.bin, if I recall correctly.
Also, what was the battery at when you were flashing? I remember accidentally flashing a Vibrant ffirmware when I first got my i9000m (due to the box saying "Samsung Vibrant", duh) and I distinctly remember my phone losing the ability to charge the battery. If your battery died, there's a good chance that nothing is happening because of this, even when you plug your phone in.
Your best bet sounds like getting a USB jig, I'd say. But check to see if the file you flashed contained bootloaders. If it didn't, it's probably something similar we've overlooked. If it does contain bootloaders, you may have bricked your device.

Use UnBrickable Mod http://forum.xda-developers.com/showthread.php?t=1330491
This allows total resurrection regardless if you've damaged your bootloaders or not. You just need to mod your device once and then you can upload Download Mode from then on!
If you'd like, I can perform the mod. I ask for $30 + shipping (usually $6 unless you're overseas). Send me a PM if you need me to do it.
There is no better option than UnBrickable Mod. If you have JTAG performed, then you've got a working device one time. If you do UnBrickable Mod, you can ALWAYS upload Download Mode by removing the battery, plugging it into the computer and pressing the "Download Mode" button on the resurrector I created.

SBL.BIN file located.
Oh deary deary me... the firmware DOES contain an SBL.BIN file :-(
Sadly, i tried all softbrick button pushing solutions on a friends FULL battery. But this had no effect either. And i have already bought a USB jig, that does nothing on my bricked phone, but DOES work on another GalaxyS. This might be the battery though.
Having never soldered anything in my life, i am reticent to start on the hardware hacking side of things if there is another option. But the longer this goes on, the less and less likely it sounds like another option is available.
For Sparta?
upichie said:
If you open the firmware file with 7Zip, you'll be able to check if it contains bootloaders. Look for bootloader.bin and sbl.bin, if I recall correctly.
Also, what was the battery at when you were flashing? I remember accidentally flashing a Vibrant ffirmware when I first got my i9000m (due to the box saying "Samsung Vibrant", duh) and I distinctly remember my phone losing the ability to charge the battery. If your battery died, there's a good chance that nothing is happening because of this, even when you plug your phone in.
Your best bet sounds like getting a USB jig, I'd say. But check to see if the file you flashed contained bootloaders. If it didn't, it's probably something similar we've overlooked. If it does contain bootloaders, you may have bricked your device.
Click to expand...
Click to collapse

Sounds like AdamOutler is your solution for this one.

i have the same issue!!
i have the exact same problems and it happened right after i installed clockworkmod through odin and then i tried other suggestions until i used a eugene file and once i did that, it completely murdered my phone and its become completely unresponsive.. BUT i noticed that even though the screen wont come on or anything, THE BATTERY ACTUALLY STILL CHARGES! plzzzzzz help

I know this thread is a little old now... but i just wanted to say a big huge THANKS to MOBILETECHVIDEOS.
http://mobiletechvideos.mybigcommerce.com/samsung-i9000-jtag-brick-repair/
I sent my phone off to them and they fixed my dead Samsung completely.
For anyone having this same problem... make sure you check out their website. As they are masters at ressurecting a dead phone!

this problem solve or not ? cause im having the same problem too

AdamOutler said:
Use UnBrickable Mod http://forum.xda-developers.com/showthread.php?t=1330491
This allows total resurrection regardless if you've damaged your bootloaders or not. You just need to mod your device once and then you can upload Download Mode from then on!
If you'd like, I can perform the mod. I ask for $30 + shipping (usually $6 unless you're overseas). Send me a PM if you need me to do it.
There is no better option than UnBrickable Mod. If you have JTAG performed, then you've got a working device one time. If you do UnBrickable Mod, you can ALWAYS upload Download Mode by removing the battery, plugging it into the computer and pressing the "Download Mode" button on the resurrector I created.
Click to expand...
Click to collapse
Are you still working in the Unbrickable mod?