Hello,
Ok, first, the briefing:
I used verygreen´s Size-agnostic SD Card image and CM7 installer for SD Cards to run CM7 (installer 1.3 -> nightly 87 + gapps) on my nook. Works great. Kudos verygreen.
I tested 3 different SD cards to do so. Sadly, none of my Class 4 cards worked and only an old Class 2 2g Toshiba did the trick. Since I don´t intend to have a big fight with my wife about why I need to buy a 2nd. class 4 SD card this week, I am keeping the 2g Toshiba. (I know, I know, I should´ve bought a Sandisk Class 4 to begin with but they're a not easy to come by here in Brazil. At least, not a real Class 4).
And this is my problem:
The CM7 sees only 350 - 400 MB available in the "SD Card". That is hardly enough for HD games. Meanwhile, the "internal" memory has over 700 MB available.
What I'd like to do is:
Change the SD card partition to move some of the available space from the "internal" memory to the "SD card" on CM7.
Question:
Is it possible? How? Is it gonna mess up the CM7?
Alternatively, I was considering WobbleTheHutt method to swap SDcard and emmc. But, before I do it, I need to know if this method would affect the booting of the stock Nook. Does anyone knows?
Thnx.
I freaking did it!
I freaking did it! And it's running smoothly!
Ok! For those who want to give it a try.
First, I used Gnome Partition Editor for Windows to decrease the size of the EXT partition. Then, I used Minitool Partition Wizard Home edition to increase the FAT partition.
I actually created a image of my original SD card, just in case, but it was unnecessary since it didn't mess any of my data or apps. Still, as a security measure, I suggest who ever try this to also create a backup image of the original SD card.
santosacm said:
I freaking did it! And it's running smoothly!
Ok! For those who want to give it a try.
First, I used Gnome Partition Editor for Windows to decrease the size of the EXT partition. Then, I used Minitool Partition Wizard Home edition to increase the FAT partition.
I actually created a image of my original SD card, just in case, but it was unnecessary since it didn't mess any of my data or apps. Still, as a security measure, I suggest who ever try this to also create a backup image of the original SD card.
Click to expand...
Click to collapse
Hey! Nice idea.
I was looking for a method to backup my CM7(verygreen) SD card but I don't have a card reader with me currently.
Is is possible to backup complete SD card(all 4 CM7 partitions) using just the nook and windows??
P.S. I have Clockworkmod recovery installed onto emmc, if it's possible through that?
thanks.
santosacm said:
I freaking did it! And it's running smoothly!
Ok! For those who want to give it a try.
First, I used Gnome Partition Editor for Windows to decrease the size of the EXT partition. Then, I used Minitool Partition Wizard Home edition to increase the FAT partition.
I actually created a image of my original SD card, just in case, but it was unnecessary since it didn't mess any of my data or apps. Still, as a security measure, I suggest who ever try this to also create a backup image of the original SD card.
Click to expand...
Click to collapse
Why didn't you use GPE for both steps? I use it all the time and it works fine.
____________________________________________________
Sent from NookColor CM7 uSD using Tapatalk
Related
OK, so I just upgraded to a Transcend 8GB Class 6 MicroSD card from the stock card that was included with the phone originally.
Now, my issue is I have it partitioned for APP2SD and such for Nightlys.
If I partition the new card, I know I'll obviously take all the base data off my old card and put it on the new one. Now, all the apps and stuff on my ext3 part of the card....
Should I just:
A) Do nandroid backup +ext, put new card in and restore (I'm just taking a shot in the dark and assuming this would work)
B) Other method?
Any advice would be great
Shoot, my apologies.
I posted this in the development section by mistake. I had too many tabs open!
Well i just recently got a 32GB card. All i done was any apps i had on the sd card i moved back to the phone. Backed-up anything i had on old card (mp3s, photos etc). Plugged in new sd card, formatted it then thats about it.
Only thing that changed was beautiful widgets, but all that had to do is download some little file again.
Also, when partitioning, how much do you suggest for ext3? I was thinking about 32MB SWAP, 256MB Ext3.....ext3 is used for apps, right?
Thanks.
uoY_redruM said:
Also, when partitioning, how much do you suggest for ext3? I was thinking about 32MB SWAP, 256MB Ext3.....ext3 is used for apps, right?
Thanks.
Click to expand...
Click to collapse
personally i don't think 256 is enough. i currently have 756 and have 100mb free.
you can just do a nandroid +ext backup and it will restore it correctly as all it does is tar the sd ext directories then extract them on restore. obviously the partition has to be larger or equal in size.
i didnt partition my card at all. Is that bad? Wont the phone do it when you format it?
zok-star said:
i didnt partition my card at all. Is that bad? Wont the phone do it when you format it?
Click to expand...
Click to collapse
Are you using the FroYo FAT method or the A2EXT method?
wdfowty said:
Are you using the FroYo FAT method or the A2EXT method?
Click to expand...
Click to collapse
?? No idea, i just formatted the card via the phone. so im guessing froyo fat?
Hey guys. I'm a noob to the nook. Got mine yesterday and flashed nookie froyo 0.6.8. Flashed auto nooter 3.0 before that (not sure that was necessary, but I did it anyway - Was it necessary?)
I digress... I'm confused about the sd card and from what I've read in the forum, it's still not clear to me. So here are my questions and I apologize if they were answered elsewhere. If someone could link a post that might be helpful that would be great!
1. Which roms run off the external sd card?
2. Is it better to run off the external sd card?
3. I'm using an 8 gig class 10 card, but only 1.78 is accessible and and less than 500 mb of open space is left.
4. NookcolorUMS is confusing. I've tried mounting all partitions and cant access the extra space. And yes I did format it after flashing so it's allocated using FAT32.
Any help or direction to helpful posts would be really greatly appreciated.
Thanks!
treylemkn said:
Hey guys. I'm a noob to the nook. Got mine yesterday and flashed nookie froyo 0.6.8. Flashed auto nooter 3.0 before that (not sure that was necessary, but I did it anyway - Was it necessary?)
I digress... I'm confused about the sd card and from what I've read in the forum, it's still not clear to me. So here are my questions and I apologize if they were answered elsewhere. If someone could link a post that might be helpful that would be great!
1. Which roms run off the external sd card?
2. Is it better to run off the external sd card?
3. I'm using an 8 gig class 10 card, but only 1.78 is accessible and and less than 500 mb of open space is left.
4. NookcolorUMS is confusing. I've tried mounting all partitions and cant access the extra space. And yes I did format it after flashing so it's allocated using FAT32.
Any help or direction to helpful posts would be really greatly appreciated.
Thanks!
Click to expand...
Click to collapse
1. I think CM7, NookieFroyo, and the HC build have all been made to run off the SD.
2. I don't think so; it does give you the nice "sandbox" feel that you can't screw anything up though. It is MUCH faster to run off the internal memory; and with the multi boot ability in my opinion there really is no reason to run off an SD card.
3. I'd look at the card in some type of partition manager; there may be some partitions that can not be seen otherwise. Have you already flashed a rom to the card?
4. Not sure.
themoe said:
1. I think CM7, NookieFroyo, and the HC build have all been made to run off the SD.
2. I don't think so; it does give you the nice "sandbox" feel that you can't screw anything up though. It is MUCH faster to run off the internal memory; and with the multi boot ability in my opinion there really is no reason to run off an SD card.
3. I'd look at the card in some type of partition manager; there may be some partitions that can not be seen otherwise. Have you already flashed a rom to the card?
4. Not sure.
Click to expand...
Click to collapse
I flashed the image to the external sd card. It put the boot image after flashing on the card. I just reformatted the card and can now see it in the nook.
New questions.
1. Is there a way to create a nandroid back up?
2. How do I get to clockwork recovery without using the image on the sd card?
Maybe more questions later.
Thanks!
themoe said:
1. I think CM7, NookieFroyo, and the HC build have all been made to run off the SD.
2. I don't think so; it does give you the nice "sandbox" feel that you can't screw anything up though. It is MUCH faster to run off the internal memory; and with the multi boot ability in my opinion there really is no reason to run off an SD card.
3. I'd look at the card in some type of partition manager; there may be some partitions that can not be seen otherwise. Have you already flashed a rom to the card?
4. Not sure.
Click to expand...
Click to collapse
Multi-boot ability? I still have so much to learn. Is it basically a matter of rearranging the partitions on the internal storage? Would the best link be http://forum.xda-developers.com/showthread.php?t=959461
?
Can the primary partition continue to boot stock unrooted Nook ROM?
* Go to the parallel Development Forum to find threads on:
- Multi-boot (very simple to install)
and
- SD card booting versions of CM7, Honeycomb and Froyo
* Within the thread of each of those three, you will find instructions for adjusting things (installing missing capabilities, partitions, etc).
* Download Free Easeus Partition Manager (sp?) to extend 4th partition while looking at SD card in Windows, this will give Android's /sdcard folder the rest of your card. Then Download Free Notepad++ (linux file format text editor) to edit a file as described in those threads. See threads for more details.
* Download Free Win 32 Disk Imager to backup SD card in Windows ("read" backs up card, "write" burns an image to card, the latter is how you create bootable ROM on SD card).
I have spent over an hour reading threads and searching, cannot find what I need.
I have CM7 on eMMC.
How do I get my sd card back to 8gb?
SOVLED
-My Computer-Right click on SD card Drive- Format - Card is now 8 Gigabytes
Had this last night but try formatting the SD card within your nook. I had an SD card with 1 gig image and was having the same problem.
Just to clarify. Use the format options within the nook. Sorry not in front of Nook at the moment.
Larry94 said:
-My Computer-Right click on SD card Drive- Format - Card is now 8 Gigabytes
Click to expand...
Click to collapse
Tks, but that did not work
Zhousibo said:
Just to clarify. Use the format options within the nook. Sorry not in front of Nook at the moment.
Click to expand...
Click to collapse
I read that on CM7 on eMMC when doing that it formats the boot on the nook not the sd card, so did you do this or just think its the way to do it. THanks
Use this program, the free edition:
EASEUS Partition Manager
Windows can only see the first partition on your card. There are probably 4 partitions left from your emmc install. Plug your microSD card into your computer and launch EASEUS. You should see the driver letter assigned to your microSD card and 3 other unassigned partitions on your card. Right click on each of those partitions and delete them. Then either resize the primary partition Windows can see to the full size of the card, or delete that partition, then create a primary partition on the card that uses the full card size. You should now have your full capacity back.
rog152 said:
I read that on CM7 on eMMC when doing that it formats the boot on the nook not the sd card, so did you do this or just think its the way to do it. THanks
Click to expand...
Click to collapse
No, I actually did the format using CM7 on my Nook Color. Bit hazy on the exact details, but if you look at the SD storage section in the Settings you should see the different SD cards and will show which to format. I had used my 8 gig SD card as a 120 meg SD boot with CWM so this SD card kept showing available space of about 120 meg (so I chose this to format).
'Should' be fairly obvious but can understand your hesitation.
FYI, I tried Easues Partition on my Windows 7 64 bit machine but did not recognize. Might be worth trying XP or Linux if you have but I would test the above option (Backup everything if concerned). I had just flashed CM7 to my nook so wasn't too bothered if I lost anything.
I can check when I get home.
rog152 said:
I have spent over an hour reading threads and searching, cannot find what I need.
I have CM7 on eMMC.
How do I get my sd card back to 8gb?
Click to expand...
Click to collapse
Windows only sees one primary partition, so you have to use a partition manager to delete the other primary partitions. MiniTool Partition Wizard claims to work in all versions of Windows, I only have 32 bit Vista. Or you could use Linux in a virtual machine such as Vmware, it's free for home use.
Alakar said:
Use this program, the free edition:
EASEUS Partition Manager
Windows can only see the first partition on your card. There are probably 4 partitions left from your emmc install. Plug your microSD card into your computer and launch EASEUS. You should see the driver letter assigned to your microSD card and 3 other unassigned partitions on your card. Right click on each of those partitions and delete them. Then either resize the primary partition Windows can see to the full size of the card, or delete that partition, then create a primary partition on the card that uses the full card size. You should now have your full capacity back.
Click to expand...
Click to collapse
Thanks, this worked.
also this link
http://nookdevs.com/NookColor_Format_and_partition_your_SD_card_back_to_a_usable_state
I use SD Formatter, works great
Hi,
I just got myself a Nook Color with version 1.2 update and I am planning to root the device from a microSD Card with CM7 or Honeycomb. But before I start, I have two basic queries:
1. Which rooting will give a better and stable web browsing experience - CM7 (Gingerbread) or Honeycomb
2. Can I store and view my personal files (e.g, movies) from the microSD Card which will boot my Nook Color with CM7/Honeycomb? I am very concerned about this, as the Nook Color v1.2 comes with only 1 GB of free space for personal files storage and so I need to store my movies in mircoSD card. At the same time, I don't want to change the stock software thus violating warranty, so I have to root using a microSD card.
I am very new to this, so will appreciate your response very much. Thanks in advance.
Dazed378 said:
Hi,
I just got myself a Nook Color with version 1.2 update and I am planning to root the device from a microSD Card with CM7 or Honeycomb. But before I start, I have two basic queries:
1. Which rooting will give a better and stable web browsing experience - CM7 (Gingerbread) or Honeycomb
2. Can I store and view my personal files (e.g, movies) from the microSD Card which will boot my Nook Color with CM7/Honeycomb? I am very concerned about this, as the Nook Color v1.2 comes with only 1 GB of free space for personal files storage and so I need to store my movies in mircoSD card. At the same time, I don't want to change the stock software thus violating warranty, so I have to root using a microSD card.
I am very new to this, so will appreciate your response very much. Thanks in advance.
Click to expand...
Click to collapse
1. Without a doubt cm7. Honeycomb will unfortunately be forever buggy.
2. Yes you can use the left over storage on your SD card for files, music, videos, app etc.
And FYI you can root the internal memory and if you need to return for warranty then you can just return to stock and b&n will not know a thing but if you are going to run off the SD card make sure that it is a sandisk.
Sent from my NookColor using Tapatalk
The thing to remember if you want to access the 4th partitiion for storage is that you have to do it while the SD is in the NC. Win xp will only see the first partition which has only about 155 megs.
Thanks a ton! I have few more quick questions.
1. What is the most stable CM7 version for rooting 1.2 version Nook Color as of today?
2. Will the rooted nook be able to play AVI video files? What app I need to download for that?
3. I found that PDF page load is very slow in my Nook Color. What app do you suggest for a good reading experience?
Once again, thanks in anticipation.
1. 7.0.3 is the latest stable version of CM7, however, most people keeps up-to-day with nightly builds.
2. it should, if not, install Rock Player Lite, it plays virtually everthing
3. Either Adobe Reader or Alkido would do the job
Not able to copy files to uSD card which boots CM7
Hey thanks for your all your support. I was able to install CM7.0.3 on my 1 GB uSD card and also installed Adobe Reader and Moboplayer. Everything works fine, except when I connect my NC to my PC, and then turn on USB Mass Storage on NC, I can only explore my Nook Color (showing as F: drive) to copy files. I cannot open/explore my SD card, though the PC shows the uSD card as "Removable Disk (E. When I try open this E: drive, I get the message "Please insert a disk in E: drive".
Also, my NC does not seem to identify the SD card. When I go to Settings -> Storage, it shows total space unavailable under SD card. Even when I open Moboplayer, I get the message "There is no SD card, make sure it is usable". I could only play videos copied to my NC internal memory.
I was told that I can use the leftover space of the uSD card to copy personal files, but I have no success on that front yet :-(. Any idea/suggestions how to fix this issue?
More information:
In my NC Storage Settings, it shows:
1. SD card: Total space unavailable, Available space unavailable.
2. Internal storage: Total space 525 MB, Available space 449 MB
3. Additional storage (emmc): Total space 1 GB, Available space 63.51 MB
Wondering what is 2nd one (Internal storage)? Is that the data partition of my SD card? If yes, how can I copy personal files there?
Did you say you are using a 1GB uSD? IMO, that's way too small for what you want to do. I would recommend either a 4 or 8GB sandisk card to allow you enough space for files and the OS. Remember that this is also your boot disk and the cm7 files are taking up most of the available space on a 1GB card. Just sayin......
Sent from my NookColor using Tapatalk
I have ordered for a 16 GB class 4 SanDisk uSD card. I had a 1 GB uSD card at hand, so wanted to test with that first before I receive the 16 GB card. And as I said, I had no prob at all installing CM7.0.3 on the 1 GB card and if I am not wrong the card still has hunderds of MB memory free. My question is why can't I explore the SD card when I connect my NC to PC thru' the USB cable?
Dazed378 said:
I have ordered for a 16 GB class 4 SanDisk uSD card. I had a 1 GB uSD card at hand, so wanted to test with that first before I receive the 16 GB card. And as I said, I had no prob at all installing CM7.0.3 on the 1 GB card and if I am not wrong the card still has hunderds of MB memory free. My question is why can't I explore the SD card when I connect my NC to PC thru' the USB cable?
Click to expand...
Click to collapse
I don't recall the specific partition sizing of SASD but I would suspect there is no space available on the uSD after SASD creates the first 3 partitions... thus no partition 4 to be mounted as /sdcard.
Ok, thanks. As a mentioned in couple of posts back, any idea what is the "Internal Storage" of 525 MB total space that shows up in my storage settings? It is different from the emmc storage, because that shows up as the third storage option with 1 GB total space.
Ok - just found this thread and had to ask:
I'm running a stock 1.3 on the eMMC, and CM7.1 on a 16G micro-SD.
When I boot into the stock ROM, I see that my SD is mounted, but that the stock ROM mounted the /boot partition, rather than the /SD Card partition.
Is there a way to set the stock rom to boot /SD Card, or hide the other three from it?
Thanks!
traumadog said:
Ok - just found this thread and had to ask:
I'm running a stock 1.3 on the eMMC, and CM7.1 on a 16G micro-SD.
When I boot into the stock ROM, I see that my SD is mounted, but that the stock ROM mounted the /boot partition, rather than the /SD Card partition.
Is there a way to set the stock rom to boot /SD Card, or hide the other three from it?
Thanks!
Click to expand...
Click to collapse
To my knowledge, no, you cannot make the stock OS see any but the boot partition of the SD card. Both stock and your CM7 card can access eMMC storage, but stock can only see the first partition of your card. If you want a stock and a CM7 installation to share one /sdcard partition, you will have to set up a dual boot on internal storage (mine is linked in my sig).
If you just want to have some SD storage available to your stock install, you might be able to stretch the card's /boot partition and store some files in there, but I don't know if your SD install would remain stable. You could always back up your card as a disk image and try it out.
Taosaur said:
To my knowledge, no, you cannot make the stock OS see any but the boot partition of the SD card. Both stock and your CM7 card can access eMMC storage, but stock can only see the first partition of your card. If you want a stock and a CM7 installation to share one /sdcard partition, you will have to set up a dual boot on internal storage (mine is linked in my sig).
If you just want to have some SD storage available to your stock install, you might be able to stretch the card's /boot partition and store some files in there, but I don't know if your SD install would remain stable. You could always back up your card as a disk image and try it out.
Click to expand...
Click to collapse
I would also like to know the answer for how to make the /boot partition larger on various images to allow sufficient room when booted from eMMC. I tried doing this with EASEUS Partition Master but it will not let me resize the boot partition. Any other options to solve the issue? The only other options is to swap cards when you know you are booting off eMMC and that is a pain.
hikersc said:
I would also like to know the answer for how to make the /boot partition larger on various images to allow sufficient room when booted from eMMC. I tried doing this with EASEUS Partition Master but it will not let me resize the boot partition. Any other options to solve the issue? The only other options is to swap cards when you know you are booting off eMMC and that is a pain.
Click to expand...
Click to collapse
What are you trying to accomplish?
What is your running system?
Why do you want to expand the boot partition?
votinh said:
What are you trying to accomplish?
What is your running system?
Why do you want to expand the boot partition?
Click to expand...
Click to collapse
Sorry, I guess that I could have been more clear in what I am trying to do. I have a rooted nook color 1.1. I burned the image for the dualboot phiremod/Honeycomb that is approximately 3.5 Gb. I burned it to an 8 Gb card and then expanded the 7th (/sdcard) partition to use the space which is available when booted to phiremod. When I boot (with the card installed) to eMMC via J4mm3r's u-boot menu, my rooted 1.1 comes up but sees the /boot partition as the SD card. Since it is the /boot partition, it only has 80 Mb free which is not enough for Titanium Backup, etc. If I could make the /boot partition larger (say 2 Gb) then everything would work as desired.
1. I don't use dual boot option so can't help you
2. I don't use either Phiremod nor Honeycomb so can't help you but
a. I think the NC should still the left-over of the uSD card. if not
b. Try using MiniTool Partition wizard to expand the boot partition and see what happens. Not so sure if it allowed to do so.
hikersc said:
Sorry, I guess that I could have been more clear in what I am trying to do. I have a rooted nook color 1.1. I burned the image for the dualboot phiremod/Honeycomb that is approximately 3.5 Gb. I burned it to an 8 Gb card and then expanded the 7th (/sdcard) partition to use the space which is available when booted to phiremod. When I boot (with the card installed) to eMMC via J4mm3r's u-boot menu, my rooted 1.1 comes up but sees the /boot partition as the SD card. Since it is the /boot partition, it only has 80 Mb free which is not enough for Titanium Backup, etc. If I could make the /boot partition larger (say 2 Gb) then everything would work as desired.
Click to expand...
Click to collapse
Mmm, I think you maybe just need to make up your mind, or deal with the limitations--have your cake or eat it, because you can't do both. That said, I see no reason EASEUS wouldn't let you expand the boot partition, unless there's just no unallocated space, in which case you need to shrink your storage partition first. I don't know whether your card would boot properly with an expanded boot and random files in there, but you should be able to move the partitions around just fine.
Still, your better bet is to decide what's going to be your primary OS and stick with it. You can even dual-boot from eMMC and have two full OSes, but as long as you're using the SD as a boot drive, you're going to be trading off its ability to serve as storage for your interal OS.
Edit: sorry, didn't realize how old the thread was...was trying to find my info with the forum search. ^^;
In the original post the user asked if you could use the microSD for both booting/rooting and for storage -- when I tried this, I got a "SD Card must be formatted" error in my rooted Nook. I let it rty to format the card (then let Windows format it) and -then- I was able to store on the SD card.
But when I rebooted my Nook Color, it got stuck Infinite-looping the Nook Color splash screen. =\
I'm about to root it again, and I'd like to use the same SD card I use to root to have some storage space on it. I (had) a 4GB microSD card, but because the slot is in the worst place it could possibly be on the device...I've already managed to get it wedged inside the casing. =\ The drive still works but I'd rather not have to worry abotu swapping cards in and out and in and out; maybe I have fatter fingers than It hink, but that SD card slot is a pain in my arse.
What did I do wrong my first go 'round? I had a 4GB card, so I used the 4GB CWM image for it. Is it...really simple, and I need to format it into two partitions in windows; set 1GB aside for the CWM boot disc and the other 3GB would be available for file storage?
1. use SD formatter
2. if you used a 4GB CWM image, did you manually update it to the latest build? If not, just grab the 1GB image in the quote at the top of this thread: updated CWM. If you're planning to wipe it right after, it doesn't matter how big it is.
Also, regarding the OP and my response, I later found this link I'd saved about pointing stock to the storage partition of a CM7 SASD card: http://forum.xda-developers.com/showpost.php?p=13668471&postcount=529
I haven't tried it or seen anyone report back after trying it, but there it is if anyone wants to give it a go.
Hi everybody:
Now I have installed hybrid CM10.1 on Nook HD in a 8G TF card. Then I would like to replace it with a new 32G card.
My question is how to transfer all the data, use the extra space and does not broke the system.
Thanks
Use win32diskimager to read the 8GB card to a file. The file will be 8GB. Then use win32diskimager to write that file to your new 32GB card. Then use partitioning software like Mini-Tool Partition Wizard to expand the last partition to the full size of the card.
The data on internal memory will remain and be unchanged. You should be able to boot the new SD just like it was the old one. The only difference will be your CM10SDCARD will be much larger.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
Use win32diskimager to read the 8GB card to a file. The file will be 8GB. Then use win32diskimager to write that file to your new 32GB card. Then use partitioning software like Mini-Tool Partition Wizard to expand the last partition to the full size of the card.
The data on internal memory will remain and be unchanged. You should be able to boot the new SD just like it was the old one. The only difference will be your CM10SDCARD will be much larger.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
Thank you! It works.
leapinlar said:
Use win32diskimager to read the 8GB card to a file. The file will be 8GB. Then use win32diskimager to write that file to your new 32GB card. Then use partitioning software like Mini-Tool Partition Wizard to expand the last partition to the full size of the card.
The data on internal memory will remain and be unchanged. You should be able to boot the new SD just like it was the old one. The only difference will be your CM10SDCARD will be much larger.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
If I use the win32diskimager utility to read my working 8GB MicroSD Class4 card it sees nothing because using read will only accept IMG files. There must be something that I am missing here, so please fill in the missing details.
I was going to post an image I created using Snagit of what I see when I attempt what you suggested, but the forum software won't let me.
I plan on trying a clone operation with GParted from the working 8GB SD card to the 32Gb SDHC card. I will post my results here
badger60 said:
If I use the win32diskimager utility to read my working 8GB MicroSD Class4 card it sees nothing because using read will only accept IMG files. There must be something that I am missing here, so please fill in the missing details.
I was going to post an image I created using Snagit of what I see when I attempt what you suggested, but the forum software won't let me.
I plan on trying a clone operation with GParted from the working 8GB SD card to the 32Gb SDHC card. I will post my results here
Click to expand...
Click to collapse
I had made an empty ".txt" file, then rename it to ".img". It may solve the problem.
badger60 said:
If I use the win32diskimager utility to read my working 8GB MicroSD Class4 card it sees nothing because using read will only accept IMG files. There must be something that I am missing here, so please fill in the missing details.
I was going to post an image I created using Snagit of what I see when I attempt what you suggested, but the forum software won't let me.
I plan on trying a clone operation with GParted from the working 8GB SD card to the 32Gb SDHC card. I will post my results here
Click to expand...
Click to collapse
Just type in a name. Like 8GB.img in the box. You do not have to actually create the file first, win32diskimager will create it. Then after it is done reading that write it back to your new card.
Sent from my Nook HD+ running CM10 on Hybrid SD
attempt number 25
leapinlar said:
Just type in a name. Like 8GB.img in the box. You do not have to actually create the file first, win32diskimager will create it. Then after it is done reading that write it back to your new card.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
OK. Thanks. I am giving that a shot. I am going to try it on the Sandisk 16GB class 4 card first and then on the Samsung 32 GB class 6 unit. I will post my results here.
The results were negative with theSandisk 16 GB class 4 and Samsung 32GB class 6 HDSC cards. The 32 GB card went into a loop with the appearance of the CWM graphics and back to the initial Nook image. I let it cycle perhaps 10 times. I then tried the 16 GB card and had the same results.
badger60 said:
OK. Thanks. I am giving that a shot. I am going to try it on the Sandisk 16GB class 4 card first and then on the Samsung 32 GB class 6 unit. I will post my results here.
The results were negative with theSandisk 16 GB class 4 and Samsung 32GB class 6 HDSC cards. The 32 GB card went into a loop with the appearance of the CWM graphics and back to the initial Nook image. I let it cycle perhaps 10 times. I then tried the 16 GB card and had the same results.
Click to expand...
Click to collapse
Since that did not seem to work for you, another option is to make a nandroid backup with your old card to internal memory. You might also want to save your files that you have on CM10SDCARD. Then reburn the new card, let it set itself up, flash CM, the converter and gapps to it. Then before you reboot, restore the backup you made earlier. It should then be set up the same when you reboot. Then restore your CM10SDCARD files.
Sent from my Nook HD+ running CM10.1 on Hybrid SD
leapinlar said:
Since that did not seem to work for you, another option is to make a nandroid backup with your old card to internal memory. You might also want to save your files that you have on CM10SDCARD. Then reburn the new card, let it set itself up, flash CM, the converter and gapps to it. Then before you reboot, restore the backup you made earlier. It should then be set up the same when you reboot. Then restore your CM10SDCARD files.
Sent from my Nook HD+ running CM10.1 on Hybrid SD
Click to expand...
Click to collapse
I do appreciate the advice, but it didn't work on either SDHC card.
Sent from my Nook HD+ running CM10.0 on Hybrid
badger60 said:
I do appreciate the advice, but it didn't work on either SDHC card.
Sent from my Nook HD+ running CM10.0 on Hybrid
Click to expand...
Click to collapse
What do you mean it didn't work? Where did it fail? During backup, during new SD creation or restore?
Edit: If somewhere along the line of your trying to fix this, you installed a new image to a card and booted with it before you did a nandroid backup of your old card, you wiped out the internal /data for the old card and it is not retrievable. If you did that, you just have to start over.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
What do you mean it didn't work? Where did it fail? During backup, during new SD creation or restore?
Edit: If somewhere along the line of your trying to fix this, you installed a new image to a card and booted with it before you did a nandroid backup of your old card, you wiped out the internal /data for the old card and it is not retrievable. If you did that, you just have to start over.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
I followed your advice exactly. It appeared to work the same way that it did with the working 8GB SDHC card. I still have a nandroid backup of the old card on my PC. It just doesn't work on the two higher capacity SD cards I have. I see that I am going to have to look through the list and find the exact model of a 32 GB card that someone got working. It works fine on the Sandisk 8GB Class 4 card. The two Samsung cards (class 6) of 16 & 32 GB capacity that I own don't work. They are OK for storage use, but trying to install Android on them was a waste of time. I tried so many times. I used your tutorials and others tutorials unsuccessfully. A bum SD card is a bum SD card. I am not exactly a newbie at installing ROMs on devices . I have been doing it on my HTC Desire HD for about a year ever since HTC abandoned us and decided to not give us ICS or Jellybean for our expensive devices. I have Venom DHD on my HTC Desire HD at the moment. I am waiting for my new Samsung Galaxy s4 to arrive this week.