before this problem happen, my pc give a notification : usb not recognised. then i tried to fix this problem by removing the usb driver and install it again. after the new driver was installed, my phone cant be detected.when i plugged in the usb to pc, it only charge the phone. the notification of connecting to pc at my galaxy s doesnt show up. ive tried on other pc also. still nothing.
how can i make my galxy s connect back to pc again?
odin did not recognize my phone. when plug to pc, no device connect sound. nothing. the only thing it does is charging my phone.
Connect USB to mainboard usb port .
Install latest Kies .
Reboot phone .
Connect phone with Debugging off .
Connect phone in USB mass storage mode and wait for windows to find drivers and install them .
jje
Hi
I have exactly the same problem. I've tried all the above mentioned suggestions nothing worked for me
Had the same issue, try usb debugging on and then connect to pc or mac
Sent from my GT-I9000 using XDA App
iplaman said:
Had the same issue, try usb debugging on and then connect to pc or mac
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Tried that as well and still not recognized. I'm beginning to this the problem is from the phone itself, cause i've tried it on my PC and Mac and both had the same results (not recognized)
However the phone is working normally, except to this problem
Check for damaged pins in phones micro usb socket.Use fine needle to straight them up.I had the same problem and my phone now is fine.
Sent from my GT-I9000 using XDA Premium App
dubo said:
Check for damaged pins in phones micro usb socket.Use fine needle to straight them up.I had the same problem and my phone now is fine.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Thank you so much. That did it for me
You are a genius
Still cant detect. Btw, what lin ur talking bout?
I will bet you.Just look properly in usb micro socket.Took me about 15 minutes to work this out.Czeck if the pins not touching them selfs.
Regards
ADAM
zafrieyl said:
Still cant detect. Btw, what lin ur talking bout?
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA Premium App
omg! solved. thnks
Related
Hey guys i am using ics3333
And now my pc stopped recognizing my device whereas other device are getting recognized,
I flashed kernel again but nothing happened, wiped dalvik cache and cache partition too.. that too didnt helped.. my pc still not recognising USB help plz guys
Sent from my GT-I9000 using xda app-developers app
nilzkul said:
Hey guys i am using ics3333
And now my pc stopped recognizing my device whereas other device are getting recognized,
I flashed kernel again but nothing happened, wiped dalvik cache and cache partition too.. that too didnt helped.. my pc still not recognising USB help plz guys
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
1) try using cable to charge the phone, if it does, but does not connect , check cable, or try using another samsung usb cable
2) check micro usb slot for damage or misaligned pins, and also clean
3) try switching off WIFI, reboot phone and try to connect connect
4) try this http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
xsenman said:
1) try using cable to charge the phone, if it does, but does not connect , check cable, or try using another samsung usb cable
2) check micro usb slot for damage or misaligned pins, and also clean
3) try switching off WIFI, reboot phone and try to connect connect
4) try this http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Click to expand...
Click to collapse
None of them helped
Sent from my GT-I9000 using xda app-developers app
Hello I have problem with V28c, I installed it and after week I can't connect my LG to pc, when I connect it finds it as "Unknown device" and shows"Windows has stopped this device because it has reported problems. (Code 43)", I have tryed take off battery, factory reset, all pc connections, restart pc, changed USB cables, changed USB ports, in S/W Update mode it don't connect to pc, and I can't do something with it! Help me please!
MozeAngel said:
Hello I have problem with V28c, I installed it and after week I can't connect my LG to pc, when I connect it finds it as "Unknown device" and shows"Windows has stopped this device because it has reported problems. (Code 43)", I have tryed take off battery, factory reset, all pc connections, restart pc, changed USB cables, changed USB ports, in S/W Update mode it don't connect to pc, and I can't do something with it! Help me please!
Click to expand...
Click to collapse
Got the latest drivers installed? Maybe your usb port broke... check if there maybe is dirt in your usb port. Also if you have the chance, try to use another pc, just in case your pc is the problem. Had the same problem once
Sent from my LG-P970 using xda app-developers app
N00BY0815 said:
Got the latest drivers installed? Maybe your usb port broke... check if there maybe is dirt in your usb port. Also if you have the chance, try to use another pc, just in case your pc is the problem. Had the same problem once
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Latest drivers installed, I have tryed front and back USB ports and other USB cable. No changes. Now I can't try on other pc
my pc don't recognize my lg p970
MozeAngel said:
Latest drivers installed, I have tryed front and back USB ports and other USB cable. No changes. Now I can't try on other pc
Click to expand...
Click to collapse
i have an lg p970..when i connect it to my pc it not recognize him but the phone is chraging..it's the only thing that the phone does when i connect it to pc.(cammera is not working,it's not vibrating and it dosen't recognize my sd card) sorry for my bad english PLEASE HEL ME!!!!
Hello everybody,
-Running Windows 8, (and Windows 7 on other cpu)
-Phone was working fine (on cyanogenmod 4.0.4) and i HAD to play arounf with it.
-Stuck in double boot loop (Original Galaxy S logo followed by Galaxy S Cyanogen logo then a quick flash of cwm loading screen)
-3 button recovery does not work
-Odin/Heimdall do not work
-USB device not detected.
I have a jig, The phone shows download mode....but won't connect to the computers.
I have installe/unistalled kies, installed sdk goole drivers....no success
what to do next
help!
bump.
Your computer does not recognize the phone at all when you connect it via USB???
Does your phone start loading the battery when you connect it to the USB cable?
SeeDoubleYous said:
Your computer does not recognize the phone at all when you connect it via USB???
Does your phone start loading the battery when you connect it to the USB cable?
Click to expand...
Click to collapse
If the phone is powered off and i plug it in it starts directly into a boot loop, and i get 'usb device not recognised'
the only way to shut the phone off is to pull the battery
thanks
Ok when you are in a bootloop, the computer can not recognize the phone. This is only possible in the normal operation mode or on the download mode.
Did you ever try to come into download mode without the USB cable connected?
I mad a jig and can use it to get into download mode, but still get 'usb device notrecognized'
Thanks
Have you tried using another computer or reinstall Windows 7 to your computer when connecting? While Windows 8 should support 95-99% of devices with old derives, the legacy support is never perfect with new OS.
Sent from my GT-I9000 using Tapatalk 2
[I'll give it a try
thanks
fresh install....still didn't work
Also tried Virtual PC fresh install of XP still didn't work
thanks
I think you have to change your USB port. The same thing happened to me computer was not recognizing my phone it was fixed after i sent it for service and changes my usb port which was brooken.
Sent from my GT-I9000 using xda app-developers app
Seems that micro USB isnt working correctly
Sent from my GT-I9000 using xda premium
If i connect my phone to my pc with usb cable it says looking for mtp programs.that keeps on going until i unplug it.on my phone it says cant find software.what is the problem?
Also my phone doesnt recieve updates.is there a way to fix?
Baseband XXAMA2 . 4.1.2 This is jelly bean right?
TerenceTP7 said:
If i connect my phone to my pc with usb cable it says looking for mtp programs.that keeps on going until i unplug it.on my phone it says cant find software.what is the problem?
Also my phone doesnt recieve updates.is there a way to fix?
Baseband XXAMA2 . 4.1.2 This is jelly bean right?
Click to expand...
Click to collapse
Yes.
Do you have Kies? If not install it.
Sent from my GT-I8190 using xda app-developers app
If you connect to kies, enable usb debug.
If you connect as mtp or ptp, disable usb debug.
tys0n said:
If you connect to kies, enable usb debug.
If you connect as mtp or ptp, disable usb debug.
Click to expand...
Click to collapse
Doesnt work.usb debug enabled or disabled.it says looking for mtp device
.if thats done it starts over.on my phone it says cant find software.my phone is rooted and pc is running vista.before i had 4.1.1 and that worked fine
ppero196 said:
Yes.
Do you have Kies? If not install it.
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
With kies air i can transfer files.but no folders.is there a other option to do this?
Now i first started kies.plugged phone to usb and it says installing mtp device gti1890 ready for use.pc recognize it so its fixed.i dont get it at all but im ok with it :d
Usb is on
you can download a seperate drivers without installing the whole kies application..you can get it from galaxy y forum..
Sent from my GT-I8190 using xda app-developers app
thanks.it looks working fine now
Now suddenly it says.your device is protected for writing.delete the security.
Hows?? 10min ago i was moving folders from pc to phone.is this because of directory bind?
hey guys .. i need help .. pc doesnt recognized my phone even using kies .. this problem appear after i root my phone .. pliss help me :crying:
im using jellybean 4.1.2 ..
Kies must be one of the crappiest sw ever, but if you try to enable usb debug it should be detected.
I don't use kies. It f***s with everything when you try to connect something.
Just use the samsung driver and let windows handle the rest, but in that case don't use usb debug for filetransfer.
If you want kies for updates....don't! Kies must have bricked more phones then any other software :silly:
tys0n said:
Kies must be one of the crappiest sw ever, but if you try to enable usb debug it should be detected.
I don't use kies. It f***s with everything when you try to connect something.
Just use the samsung driver and let windows handle the rest, but in that case don't use usb debug for filetransfer.
If you want kies for updates....don't! Kies must have bricked more phones then any other software :silly:
Click to expand...
Click to collapse
Really ..orait ..let me try it first ..
Sent from my GT-I8190 using xda app-developers app
syedamerfayyadh said:
Really ..orait ..let me try it first ..
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
I want to install smsung usb driver but it shows this error "mobile phone has being using.you need to eject device and reboot your computer.rerun smsung usb driver for mobilephones after reboot" several time I reboot my laptop..but this error keep appear..
Sent from my GT-I8190 using xda app-developers app
syedamerfayyadh said:
I want to install smsung usb driver but it shows this error "mobile phone has being using.you need to eject device and reboot your computer.rerun smsung usb driver for mobilephones after reboot" several time I reboot my laptop..but this error keep appear..
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Do you have your phone connected to computer while you install driver?
Disconnect it, install drivers, reboot.
I had the same problem.
Connect with usb debug of.then connect with usb debug on.
If that doesnt help than follow the trick of tyson
TerenceTP7 said:
I had the same problem.
Connect with usb debug of.then connect with usb debug on.
If that doesnt help than follow the trick of tyson
Click to expand...
Click to collapse
I follow what tyson say..but cnnot work ..still my pc unrecognized when I insert usb..when I use my little brother s3 mini and connect to my pc,it detect..
Sent from my GT-I8190 using xda app-developers app
tys0n said:
Do you have your phone connected to computer while you install driver?
Disconnect it, install drivers, reboot.
Click to expand...
Click to collapse
this is my problem . when i want to install usb samsung driver ,my phone not connected to my pc.. but its still have a same error ..
syedamerfayyadh said:
this is my problem . when i want to install usb samsung driver ,my phone not connected to my pc.. but its still have a same error ..
Click to expand...
Click to collapse
what android version and baseband your phone have?and which windows you are using?
on your phone go to settings>and check USB debug on..connect your phone to your pc.what does it say?
TerenceTP7 said:
what android version and baseband your phone have?and which windows you are using?
on your phone go to settings>and check USB debug on..connect your phone to your pc.what does it say?
Click to expand...
Click to collapse
My android version 4.1.2 and my baseband i8190ndxll5..im using windows 7ultimate..I check my usb debug..then connected to my pc ..it say usb unrecognized..many time I try..but still the same..
Sent from my GT-I8190 using xda app-developers app
Check your CSC
syedamerfayyadh said:
My android version 4.1.2 and my baseband i8190ndxll5..im using windows 7ultimate..I check my usb debug..then connected to my pc ..it say usb unrecognized..many time I try..but still the same..
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
I had the Same Problem my csc was missing on my I8190N I flashed DModv2 and I got it back now I can connect to Kies
trucker11 said:
I had the Same Problem my csc was missing on my I8190N I flashed DModv2 and I got it back now I can connect to Kies
Click to expand...
Click to collapse
I have same issue like this. How to get dModV2 ?