Hello everyone. I have a question. Can I flash the recovery image (whether CWM or anything else) and also the Roms from within the phone without using a PC.
The problem is I don't have access to a PC (all my laptop usb connections got fried) and I have an HTC Hero. I just download whatever I want to the SD card and flash it without the need for a PC. I wonder if that is possible?
I got T-mobile Tab a couple of days ago. I rooted it and I got Rom Manager. But after I reboot in recovery, I get the verification error.
So, can I do this without the so-called Odin or Heimdall?
Thanks in advance...
if you got the CWM work on your tab so probably yes u can do so , u just need to download the rom and read the discretion given by the dev and flash it via cwm
but
there is always a need of odin , in case u stuck or something ,
and also its depend about the dev is made it to be flashed by odin or cwm .
out of topic : how is egypt , really do miss it
Thanks a lot for your answer. And it is great to find someone else misses Egypt besides myself. I guess everything there is a mess now and I'm going to check it out by the end of the month.
ahmadshawki said:
Thanks a lot for your answer. And it is great to find someone else misses Egypt besides myself. I guess everything there is a mess now and I'm going to check it out by the end of the month.
Click to expand...
Click to collapse
In my country is more messy .. its F><cked by GAddafi A><hole lolz
maybe i'll visit egypt by ramadan that in case if my family went there
i really do miss eat saber , husny , samakmak etc
You seem to know it better than me :-D
I'm going on the 27th and I'll stay there for a month. You should let me know if you go there at this time, seriously...
i'll pm u if i went there
Related
Hi guys,
I really need your help here. It's been 3 weeks now that my tab always reboots to samsung logo and i'm not able to make any ROM working. the tab is Canadian (Rogers) but was rooted and flashed to some euro ROM to enable phone calls for Moroccan network. (I think the build was froyo.xxjme, not sure. that was long time ago). Everything was working fine.
To make the long story short.I flashed some ROM from samfirmware that must of locked the bootloader (JMF). Then I tried to flash JM6, JMA, JMC, JMK, JJ4, JJ7, JM5, JJ1, JID and almost all ROTO's. with and without pit files using ODIN 1.7. I also tried a stock ROGERS ROM (that i downloaded from this forum) using Heimdall. The tab always boots to samsung galaxy tab logo. I've done alot of reading in this forum and followed many flashing instructions but when applied, it doesn't work for me.
My main concern: is there still hope with the tab ? or it's gone forever.
Is there any specific order that i must follow when flashing ? ( ie, flash one specific ROM before another)
Thanks for reading my post.
Any solution ?
Thanks is advance
No real answer but to return to Samsung and let them fix, this is what I did.
jerrycycle said:
No real answer but to return to Samsung and let them fix, this is what I did.
Click to expand...
Click to collapse
Hummm. Gonna be hard. I'm In Morocco now. tab bought from Canada. I think I'm screwed lol.
Thx Jerrycycle
Had the same problem. Shipped to Samsung....
Have you tried another of the ROMs off samfirmware...
In a normal situation I would NEVER EVER NEVER EVER EVER suggest someone flash something from that dreadful site... but in this case you already have, which did likely lock your bootloader... So perhaps trying one of the signed ROMs from them will at least get you booted...
*shrug* I dunno, seems a lot of people have already had to give up on this situation by sending it back to samsung... but if you can access download mode, there has got to be a solution...
IF U STILL NEED REPAIR U GALAXY AND U STILL IN Casablanca contact me in derb ralaff
kyo21 said:
IF U STILL NEED REPAIR U GALAXY AND U STILL IN Casablanca contact me in derb ralaff
Click to expand...
Click to collapse
Thanks Kyo21 but the issue has been fixed.
Sent from my GT-P1000 using XDA Premium App
how did you fix it ????
So I was retarded and followed the instructions (or started to) on androidadvices dot com/how-to-update-samsung-galaxy-tab-to-stable-gingerbread-2-3-3-firmware
My Tablet will not boot past the T-Mobile logo.......... they are being assholes and telling me i need to deal with samsung ......... who told me it would be 6-8 weeks for a replacement........ is there ANYONE out there that can help me with just resetting it???
If you can get to the T_Mobile logo, you probably have a working bootloader and that mean you just need to flash the correct firmware for you device.
In short words, go to samfirmware.com and download the right firmware for your tablet model.
Once you have the firmware, flash them to your tablet with 'odin' (flash software, that you can also get in the mentioned website).
This should solve the problem.
If this works I will love you.
So i am obviously more retarded than I thought pedrohfsd ........ I have an SGH-T849 and i cannot FIND the firmware on that site..... seriously? UGH
pm me i'll tell you what to do , with th stock firmware for Tmobile , i helped someone before 2days he had same tab with you ) and same problem
pedrohfsd said:
If you can get to the T_Mobile logo, you probably have a working bootloader and that mean you just need to flash the correct firmware for you device.
In short words, go to samfirmware.com and download the right firmware for your tablet model.
Once you have the firmware, flash them to your tablet with 'odin' (flash software, that you can also get in the mentioned website).
This should solve the problem.
Click to expand...
Click to collapse
You sir, are brilliant.
I wasn't able to locate the firmware on the samfirmware.com but I DID find it on XDA from another user. Put phone into download mode... waited till the little box in Odin turned yellow and loaded that badboy on there. After about 5 minutes it was back into the 2.2 OS again. The only problem that I had was with programs that had been installed before and loaded at boot (Just had to uninstall / reinstall) But for the most part its back to the way it was.
Thanks so much for your help!
You too Kosh, as I am sure you were going to walk me through exactly what I fumbled through on my own (I'm lucky I didn't blow anything up haha)
NO more attempts to get 2.3 on this badboy!
Thanks again all <3
I'm glad to hear that KalKainen, the first time i soft bricked my phone i got desperate too.
But after some weeks i saw the inumerous progressions that people develop in custom roms here in xda, and flashed the whole thing again =P.
pedrohfsd said:
I'm glad to hear that KalKainen, the first time i soft bricked my phone i got desperate too.
But after some weeks i saw the inumerous progressions that people develop in custom roms here in xda, and flashed the whole thing again =P.
Click to expand...
Click to collapse
Amen man..... desprate is about right.. haha... now if i could only figure out why i have to CONSTANTLY reboot it in order to restore network service (Even though I have 3g and full bars... no text messages send / come in and programs that use data error out... ) I would be happy. This has been happening for the last 4 months badly enough that I can have to reset it 10 times in a 2 hour period >.< I cant even put it into flight mode.... but after I TRY putting it into flight mode and then reboot it... it comes BACK in flight mode.... I hoped the reinstall of the firmware would fix it.. but alas..... still plagued. AT LEAST IT WORKS THOUGH!!
Hello there,
I just bought a galaxy note <well a week ago> and now i ended up soft bricking it.
here's how i did it -
I went to my friends place thinking of rooting my phone while he told me to add a custom rom to it . well since he was experienced i let him do it . he added a firmware of i9200(chinese ). well it worked now i found some chinese system applications that i didn't need and while searching on net how to do it i found a firmware of n7000 ics online and decided to flash it in. since i was at home i thought i would be able to do it myself and did what i shouldn't have done. i followed every step they said online and started the downloading of the rom but unfortunately when pc odin was at it's end i mean the end of downloading i actually disconnected the cable ( what the f*** was i thinking) . now i tried to reinstall the same rom but couldn't - pc odin always showed setting up connection or something like this and then stalled for hours ... i thought of flashing some other rom but it didn't - same thing <stalling for hours> . Now what should i do??? help me - maybe i can go to samsung customer care service and ask them to reset my phone but since the usb debugging was on last time when i turned my phone off , kies might not do the job . can u suggest me a way.
one more thing i can't flash stock rom into it and <i am dumb> i didn't backed up my stock rom.
p.s. my flash count is 2 . i can't load my phone into recovery mode but can into download mode and can't do it with a jig (am from india plus i am a little low on technical know how).
i can't hard reset it either. a suitable help would be appreciated ,pls
kunalteji1993 said:
Hello there,
I just bought a galaxy note <well a week ago> and now i ended up soft bricking it.
here's how i did it -
I went to my friends place thinking of rooting my phone while he told me to add a custom rom to it . well since he was experienced i let him do it . he added a firmware of i9200(chinese ). well it worked now i found some chinese system applications that i didn't need and while searching on net how to do it i found a firmware of n7000 ics online and decided to flash it in. since i was at home i thought i would be able to do it myself and did what i shouldn't have done. i followed every step they said online and started the downloading of the rom but unfortunately when pc odin was at it's end i mean the end of downloading i actually disconnected the cable ( what the f*** was i thinking) . now i tried to reinstall the same rom but couldn't - pc odin always showed setting up connection or something like this and then stalled for hours ... i thought of flashing some other rom but it didn't - same thing <stalling for hours> . Now what should i do??? help me - maybe i can go to samsung customer care service and ask them to reset my phone but since the usb debugging was on last time when i turned my phone off , kies might not do the job . can u suggest me a way.
one more thing i can't flash stock rom into it and <i am dumb> i didn't backed up my stock rom.
p.s. my flash count is 2 . i can't load my phone into recovery mode but can into download mode and can't do it with a jig (am from india plus i am a little low on technical know how).
i can't hard reset it either. a suitable help would be appreciated ,pls
Click to expand...
Click to collapse
I have no experience with this, but I did keep this video link on how to put a bricked Samsung into download mode just in case I needed it. The usb jig is the same for both the captivate and the Note from what I have read:
http://androidforums.com/captivate-...ung-captivate-usb-jig-video-start-finish.html
If you are able to enter download mode then Just try with different version of PC Odin , like V1.83, V1.85, V1.87. and do not worry about Stock ROM you can always download it from below link.
http://forum.xda-developers.com/showthread.php?t=1329360
thankyou guys but i can't use jig since i can't buy it nor am i capable of making one.
Rajan , bro my problem is something different. the roms i am trying to insert in my phone was via the odin i used earlier to flash my first rom. and it went successfully . but last time the second rom i inserted was interrupted during download and am not able to add anymore of them. now i have talked to samsung care and they told me to bring my phone along with the bill maybe they can do it. even though my warranty is done for, but i think i can believe them . yet if there are any other suggestions pls tell me or should i give it to samsung care. I really don't wanna keep my phone rooted so i have no problem flashing stock but it's not happening. CAN KIES HELP?
p.s i have used all 1.85 , 1.87 and 1.83 version no use.
kunalteji1993 said:
thankyou guys but i can't use jig since i can't buy it nor am i capable of making one.
Rajan , bro my problem is something different. the roms i am trying to insert in my phone was via the odin i used earlier to flash my first rom. and it went successfully . but last time the second rom i inserted was interrupted during download and am not able to add anymore of them. now i have talked to samsung care and they told me to bring my phone along with the bill maybe they can do it. even though my warranty is done for, but i think i can believe them . yet if there are any other suggestions pls tell me or should i give it to samsung care. I really don't wanna keep my phone rooted so i have no problem flashing stock but it's not happening. CAN KIES HELP?
p.s i have used all 1.85 , 1.87 and 1.83 version no use.
Click to expand...
Click to collapse
I fear your Note is done for, if your PC Odin session got interrupted.
chasmodo said:
I fear your Note is done for, if your PC Odin session got interrupted.
Click to expand...
Click to collapse
don't say that ... help me my situation is getting even worse now... will i be able to recover my phone!???! help me help me!
kunalteji1993 said:
don't say that ... help me my situation is getting even worse now... will i be able to recover my phone!???! help me help me!
Click to expand...
Click to collapse
Dont take it service centre.If you do so also dont say them you flashed custom rom.Then they wont fix it under warranty.Dont worry now.
Try different usb ports,uninstalling drivers and reinstalling it and try again.And as you are noob I recommend not to flash ICS customs at the moment.Stay with GB
I say go to your friend first who rooted your phone then ask him to try the various methods given in the forum recovering from softbrick.
i have read in some other websites that i will need a pit file to restore my phone + the rom file while checking repartition and auto time fe: reset in odin 1.83 then maybe i will be able to return back to gb . do u think this is ok for me to do .
p.s i live in chandigarh while my friend has moved to gurgaon so no chance to go to his place. and i have talked to customer care and told them everything. they told me to take the phone to service centre and they will help me.
now tell me what are my options!?
kunalteji1993 said:
i have read in some other websites that i will need a pit file to restore my phone + the rom file while checking repartition and auto time fe: reset in odin 1.83 then maybe i will be able to return back to gb . do u think this is ok for me to do .
p.s i live in chandigarh while my friend has moved to gurgaon so no chance to go to his place. and i have talked to customer care and told them everything. they told me to take the phone to service centre and they will help me.
now tell me what are my options!?
Click to expand...
Click to collapse
Ok now try to flash abyss kernel with red pill first lets see if it revives the phone.Yeah you are right pit file is required when you tick repartition and auto reboot and f.reset must be ticked all time.
vijai2011 said:
Ok now try to flash abyss kernel with red pill first lets see if it revives the phone.Yeah you are right pit file is required when you tick repartition and auto reboot and f.reset must be ticked all time.
Click to expand...
Click to collapse
wait . what? what is this red pill and all .. i think you can save me but i would liike you to brief me about the procedure plus i read this - i need a (wipe) rom to be able to reflash my rom or something like this .
p.s i am still downloading my firmware ...
but would be better if i get the info i need before hand!
dude.. don't panic... I don't think ur phone is dead... best is to buy a jig... try on eBay... I got it for 200rs in eBay... I don't think that's a big deal for any one with a note .. I bought it even before experimenting because I thought some thing like this might happen....
its safest way to remove the triangle and get into recovery mode... as somebody else suggested flashing red pill also works ... search in development section for abyss kernel... ull find it...
kunalteji1993 said:
wait . what? what is this red pill and all .. i think you can save me but i would liike you to brief me about the procedure plus i read this - i need a (wipe) rom to be able to reflash my rom or something like this .
p.s i am still downloading my firmware ...
but would be better if i get the info i need before hand!
Click to expand...
Click to collapse
its a kernel with a custom recovery.Its like CWM(Clock Work Mod).You could find it in the development section.Download the kernel.Could you get into recovery mode by turning off the phone,holding "vol up+home button+powerbutton"?
---------- Post added at 09:08 AM ---------- Previous post was at 09:00 AM ----------
kvsandeepreddy said:
dude.. don't panic... I don't think ur phone is dead... best is to buy a jig... try on eBay... I got it for 200rs in eBay... I don't think that's a big deal for any one with a note .. I bought it even before experimenting because I thought some thing like this might happen....
its safest way to remove the triangle and get into recovery mode... as somebody else suggested flashing red pill also works ... search in development section for abyss kernel... ull find it...
Click to expand...
Click to collapse
No need for jig because he can enter DL mode.And did using jig removed the yellow triangle for you
thanx guys for helping and current updates ---
i am in 12 th so untill my entrance exams are over i won't get to have the phone in my possession since my dad has it now ... so maybe after they are over i will continue on my quest to get it corrected!
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
kunalteji1993 said:
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
Click to expand...
Click to collapse
how did you fix it? this may help some else in the future
ratcom said:
how did you fix it? this may help some else in the future
Click to expand...
Click to collapse
service centre guys....remember he/she saying in pm
kunalteji1993 said:
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
Click to expand...
Click to collapse
wenn connecting to Kies at firmware Kies says something like LC1. lb2 (XXX) as product code? if so they have changed the board on the service center and they haven't activate the Pcode on your phone google "Pcode not active" you will find few posts till now only ppl from Germany had it who send their phones to service center via Saturn/Media Markt ist guess it was/is a technician you was sleeping on the seminare/briefing how to change the board on Note. hope it will help you if it is that try to replace your phone, had the XXX Pcode after service center got a replacement. after a month of arguing with the salesman.
Sent from my GT-N7000 using Tapatalk 2
Uninstall the Odin in your PC and install it again to see if it works.
i am pretty much sure that they didn't change the mother board. they must have added the firmware that's all as my mboard wasn't damaged at all , it was just that the battery failed when i gave it to samsung people that's why my phone overheated when they charged it and that's when the battery must have been destroyed maybe due to that overheating they must have thought to change mboard (but they didn't cause those engineers must have changed the battery prior to examining my phone for the problem). AND i didn't have pc odin on my THIS pc to start with. it was in my laptop and kies didn't even reckoned my phone there well that's why i installed kies on HERE . i guess service center people can update it the same way they installed this firmware here..... what do u suggest?
AND Braxos Pcode is active --- it's something :
GT-N7000ZBAINU
and no, the current firmware info kies shows is something like ---
N7000DDLC1/N7000ODDLC1/N7000DDLC1/N7000DDLC1(INU)
(now i think they have done something wrong - it's all n7000ddlc1 here. what is this? )
GUYS can u also tell me what does your firmware version shows (just for reference , pls do it!)
p.s my phone is still in warranty since they fixed my phone free of cost plus they also replaced the battery for free . before my phone was sent to service center my phone had a flash count of two yet they fixed it under warranty(yay!).And thank you everyone!
MY ADVICE TO NEWBIES----
If your phone is soft bricked and you don't know what to do and you think you will make the matter even worse then don't do anything to permanently brick it . you guys should go to service center , they might even fix it for u for free just like they did it for me!
Hey guys, ok so im superrrrrrrr new to this. Iv had an iphone and blackberrry half of my life and im just getting into the android world.
Point of the matter,
i have a galaxy ace, s5830m
just bought it a couple days ago here in venezuela
and everyting was running smooth, i really liked everything
since i sort of know about jailbreaking and all that stuff from having an iphone
i started reading up on how androids worked and managed to root my phone with out a problom
being that im a custom fanatic, i figured i wanted to update my gingerbread os to a ics using a custom rom from
cm9
this is what i did...
I downloaded the zip cm9 file,
loaded it into my sd card
went into recovery mode
and clicked update from sd card (totally forgot to clear cache and wipe/factory reset) as it was stated in the guide i was reading..
Anywhoo.. The instalation of the rom went fine, it said it installed correctly and with no errors
so i rebooted the phone, afterwards as it stated on the guide and boom!
Bootloop...
the phone is stuck on the samsung galaxy ace s5280m screen and wont finish booting up
iv left it like that for more then 30mins and nothing! Iv done several batter pulls and reboots and nothing
i went into recover mode and tried clearing cache and doing the wipe and rebooting again
but nothing! Its still stuck in the loop!
I did some reading and figured id load a stock firmware using odin hoping this would fix the problom
so i downloaded the latest one from my country from sammobile
downloaded the drivers
the cooper_v1.0 file
downloaded odin v4.38
did everything as the guide said but now odin isnt wanting to work,
i opened it as a administrator, i loaded the cooper file,
but when i want to load the single tar.md5 file..(the firmware)
it totally crashes on me, iv tried several times and it always crashes at the same point
iv tried on 3 diffrent computers and iv tried diffrent odim versoins and it always crashes at the same place!
This is when i started to worry, so i downlaoded samsung kies, to see if i can do a firmware update from there thinking itd be more reliable but now my computer doesnt want to reconize my phone
i can enter both download mode and recover mode having only the clear cache/factoryreset/and reboot options available.. Im really freakeddd out being that i just got this phone, and i feel pretty stupid i should have never done anything to the phone...but if anyone could help id really apreciate it!
Im desperate and i dont want to take it anywhere, cause im in venezuela at the moment
and i dont want to end up paying another dude a bunch of money to fix something that cud be fixed with some easy steps.
So any help is great!
I think that:
The s5830M is the same as s5830i
The s5830M is NOT the same as s5830
That might be your problem. I may be wrong but it's worth looking up.
If I'm right you will need to change Cooper file for correct one for your device. Also correct ROM too!
If I'm wrong, then, sorry.
Search more before you take any action. If you can get into download mode it can usually be fixed the way you are doing it but with correct files.
hmm
121C4 said:
I think that:
The s5830M is the same as s5830i
The s5830M is NOT the same as s5830
That might be your problem. I may be wrong but it's worth looking up.
If I'm right you will need to change Cooper file for correct one for your device. Also correct ROM too!
If I'm wrong, then, sorry.
Search more before you take any action. If you can get into download mode it can usually be fixed the way you are doing it but with correct files.
Click to expand...
Click to collapse
Ok i can look that up,
i kind have the same feeling,
being that the models are always divided as such..
So your saying (if this is right)
i need to find the Cooper File for s5830i
AND the ROM
and Odin should work after that?
The thing thats worrying me, is that all odin is doing is crashing on me,
but im going to look for another cooper file
being that the rom is especifcally for s5830M already
thanks for your fast response
im going to try this and get back to you...cause i really want my phone back D:
You need odin 1.85 i think, not sure.
And yes, 5830i and 5830m are compatible, but roms for 5830 and 5830L can brick your device.
ok
dxppxd said:
You need odin 1.85 i think, not sure.
And yes, 5830i and 5830m are compatible, but roms for 5830 and 5830L can brick your device.
Click to expand...
Click to collapse
ok so i did some investigation
after you told me about the models not being the same and ur right
i and m models are the same
and they only work with odin 1.85 as yu just said
and supposedly
only full package roms work not one package roms
and as i kepted reading in a spanish form,
there arent any ICS custom mods availbale for the M series
the only roms they run are the original stock roms.
so i guess i can forget trying to load a custom ICS rom into it
if this all works as the spanish forum explained
ill get back and confirm everything
ok so i have everything ready now,
but now my pc doesnt want to read my phone wile its on download mode
it will only read wile its on boot loop mode
and the only thing that happens on odin
is that it says ADDED!! (wile on boot loop mode)
but it never says my phone is reconized like its suppose to..
and when i click start.. nothing happens..
anyway to get my pc to reconize my phone on download mode?
or am i doing something wrong?
Maybe ask on the 5830i general thread?
I don't have the same phone as you so I don't really know what too suggest besides asking other people with the same phone as you.
121C4 said:
Maybe ask on the 5830i general thread?
I don't have the same phone as you so I don't really know what too suggest besides asking other people with the same phone as you.
Click to expand...
Click to collapse
i actually finally got odin to reconize the phone,
i uninstalled keis and installed the samsung drivers alone..
and got it to work
but now i have another problom!
(when will this stoppppppp)
when i finally have everything setup on odin,
and i click START
some movement happens
and then my pc restarts on its own by itself?...
:crying::crying::crying::crying::crying::crying::crying::crying:
JuniMatos said:
i actually finally got odin to reconize the phone,
i uninstalled keis and installed the samsung drivers alone..
and got it to work
but now i have another problom!
(when will this stoppppppp)
when i finally have everything setup on odin,
and i click START
some movement happens
and then my pc restarts on its own by itself?...
:crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Try on another pc. Dont give up!! There will be a solution
Sent from my GT-S5830 using xda app-developers app
Hey XDA guys,
I've got an I8190N
I've got a pretty big problems and I need the help of your big brains.
Well a long time ago (17th September 2013) I posted a thread about a problem with my phone, when I booted up, it had this screen:
*Image should either be here or in the attached thumbnails*
So about 3 weeks ago from today I was trying to install a new CM11 ROM update from Maclaw but after I put the zip on my sd card and booted into TWRP recovery (2.6.3.0, just in case it needs mentioning), the phone shut off in the middle of the installation, I thought it was just the usual bugs I get whilst flashing ROMs so I tried to turn it on and it wouldn't turn on.
After a couple of attempts I finally realised that it's able to go into download mode only, I think that means it's soft-bricked right?
So I kept trying to re-install the stock ROM (unroot, unbrick etc) through odin but it kept failing.
I sent the phone to repairs and they wouldn't repair it (because it's rooted obviously, I thought maybe they wouldn't know but of course they did).
I obviously can't get a replacement and start over again because the warranty is void now that I've rooted it
So now they've sent it back and it's currently a paper weight that can go into download mode and refuses to install stock ROMs through Odin.
What do I do? I really need help guys (I don't need to worry about backups because I always backup)
Please answer soon, otherwise I'll be without a phone and my phone company will keep charging me for my contract eventhough I'm not using the phone.
Thanks in advance for any help given
LordwinOfficial said:
Hey XDA guys,
I've got an I8190N
I've got a pretty big problems and I need the help of your big brains.
Well a long time ago (17th September 2013) I posted a thread about a problem with my phone, when I booted up, it had this screen:
*Image should either be here or in the attached thumbnails*
So about 3 weeks ago from today I was trying to install a new CM11 ROM update from Maclaw but after I put the zip on my sd card and booted into TWRP recovery (2.6.3.0, just in case it needs mentioning), the phone shut off in the middle of the installation, I thought it was just the usual bugs I get whilst flashing ROMs so I tried to turn it on and it wouldn't turn on.
After a couple of attempts I finally realised that it's able to go into download mode only, I think that means it's soft-bricked right?
So I kept trying to re-install the stock ROM (unroot, unbrick etc) through odin but it kept failing.
I sent the phone to repairs and they wouldn't repair it (because it's rooted obviously, I thought maybe they wouldn't know but of course they did).
I obviously can't get a replacement and start over again because the warranty is void now that I've rooted it
So now they've sent it back and it's currently a paper weight that can go into download mode and refuses to install stock ROMs through Odin.
What do I do? I really need help guys (I don't need to worry about backups because I always backup)
Please answer soon, otherwise I'll be without a phone and my phone company will keep charging me for my contract eventhough I'm not using the phone.
Thanks in advance for any help given
Click to expand...
Click to collapse
I believe that kies has emergency firmware that you can use to revive your phone? Try that. What does it say when it fails in odin?
hello,
so you can still go into download modus?
try the latest recovery (2.7 if i'm correct...) and flash with odin.
then try to boot into recovery and reflash the latest mclaw (or any other) non stock firmware.
think about it that you have to unzip the odin firmware package you download from maclaws site ( i forgot it and got messing around 2hours ago.... also staring at the erro in odin and thinking W*F is happening :cyclops: but then i realized i need to unzip the package...
realy good luck.....
Hi
Odin flash pit file
It just says the big black FAIL in the red background where it's supposed to be PASS in the green background
Could you guys give me download links to the PIT files, TWRP and the firmwares so I could get the right ones please?
Thanks
LOOK HERE
(i8190_goldenxx.zip) is the pitfile for I8190 only and i8190N_goldenxx.zip for I8190N version
BUT: these are NO flashable files - extract them and choose xxx.pit in Odin.
MJ
Could you give me a link to the pit file please
Do you have a link to the firmware I should use because tys0n gave me one before which was the service firmware (like 1.29gb) but it wouldn't work for this problem
LordwinOfficial said:
Do you have a link to the firmware I should use because tys0n gave me one before which was the service firmware (like 1.29gb) but it wouldn't work for this problem
Click to expand...
Click to collapse
come on boy, it´s really easy to find it, but ok, it´s friday and weekend comes ...
Firmware
Look at the attached files in that post
to flash a pre-rooted, deodexed and zipaligned ROM try this one
MJ
LordwinOfficial said:
Hey XDA guys,
I've got an I8190N
I've got a pretty big problems and I need the help of your big brains.
Well a long time ago (17th September 2013) I posted a thread about a problem with my phone, when I booted up, it had this screen:
*Image should either be here or in the attached thumbnails*
So about 3 weeks ago from today I was trying to install a new CM11 ROM update from Maclaw but after I put the zip on my sd card and booted into TWRP recovery (2.6.3.0, just in case it needs mentioning), the phone shut off in the middle of the installation, I thought it was just the usual bugs I get whilst flashing ROMs so I tried to turn it on and it wouldn't turn on.
After a couple of attempts I finally realised that it's able to go into download mode only, I think that means it's soft-bricked right?
So I kept trying to re-install the stock ROM (unroot, unbrick etc) through odin but it kept failing.
I sent the phone to repairs and they wouldn't repair it (because it's rooted obviously, I thought maybe they wouldn't know but of course they did).
I obviously can't get a replacement and start over again because the warranty is void now that I've rooted it
So now they've sent it back and it's currently a paper weight that can go into download mode and refuses to install stock ROMs through Odin.
What do I do? I really need help guys (I don't need to worry about backups because I always backup)
Please answer soon, otherwise I'll be without a phone and my phone company will keep charging me for my contract eventhough I'm not using the phone.
Thanks in advance for any help given
Click to expand...
Click to collapse
You can go to recovery mode then by using three button combo
if its no working flash it from here using odin
Sorry, it's just not my day, phone breaks, gf breaks up with me because I didn't reply to her because my phone broke lol just ain't able to fix my phone myself like usual, I got a USB jig on the side just in case I need it if that'll be of any help? & Thanks for the links, appreciate the help
Fixed
Thanks guys, the phones fixed
Really appreciate all the help