hello there after that i have installed a custom rom in my xperia x8 by android 2.1 to custom rom gingerfloyo 2.9 the phone have a problem:
when i connect the phone to the charger, the phone always restart instead shutdown it...
help I do not know what to do
if something help me a downgrade the phone to 1.6 i can update the phone with seus and the problem should deleted...correct
sorry for my bad english
You should be able to downgrade it with any regular flasher for the x8. I did it too, when i was a newb in rooting and using cm's. You just need a firmware flasher and the x8's original 1.6 firmware. Anyway, that's what i had used xD
Sent from my Xperia X8
Why do you want to go back to 1.6?
If I understood you right, you have GingerFloyo right now, so you can also go back with flashing your 2.1 backup with xrecovery, or, if you haven´t made one, you can go back to 2.1 via PCC/SEUS.
so now i have 2.9 floyo however the bug there is also the in my beck up of 2.1...
Georg1992ad i need a firmware flasher and the x8's original 1.6 firmware
you can pass me?
codfreak for you...what is the more stable custom rom in xperia x8??(something version by 2.1 to 2.3)
many thanks to all
Sorry again for my English as soon as I fix the phone i will learn it xD
http://forum.xda-developers.com/showthread.php?p=12442257#post12442257
again thank to all..
i don't know what i could make without your help
I´ve looking for a downgrade for my X8 until i found this post with some similarities mith my case, I hope u dont mind that I asked for some help in the post of someonelse
Well, I upgrade my X8 to MiniCM6-1.0.1 and to do this i follow a tutorial on youtube, but after root my phone and installed a baseband that ends in ...xxx015 in order to install the MiniCM6-1.0.1 I realized that my phone couldnt conect to internet in 3g mode.. someweeks after that i tried to recover 3g mode by installing Hackdroid Floyo 2.2.5 and I discovered that i completely lost conection to internet (even EDGE and GSM mode) and since then I´ve trying to Downgrade my phone with SEUS and PCC but both dind´t work
So finally im trying to downdrade my X8 with Falshtool but when the program is going to start flashing an error appears and this is what it says
ERROR - Error in processHeader
ERROR - Error flashing. Aborted
Please could u help me to find a solution to this?
Thanks for ur time
Have you repaired with pc companion yet and why are using old roms?
Sent from my E15 using XDA App
Yes, i tried PC companion and it did not work y also tried to repair with SEUS but also did not work.
To be true i didn´t know that MiniCM6-1.0.1 was old... my BIG mistake was to follow a tutorial video on youtube to upgrade my X8 from 2.1.1 (original firmware) to 2.2.1 without looking for more detail information
When I installed the hacdroid version and after config the APN I was able to conect to internet just in EDGE mode, but one day after (and until now) I lost conection to internet in anymode My provider gave me some manual configuration and even resets my service but it didn´t work
Any idea to solve internet and flashtool problems?
Thanks a lot!
Julioop said:
Yes, i tried PC companion and it did not work y also tried to repair with SEUS but also did not work.
To be true i didn´t know that MiniCM6-1.0.1 was old... my BIG mistake was to follow a tutorial video on youtube to upgrade my X8 from 2.1.1 (original firmware) to 2.2.1 without looking for more detail information
When I installed the hacdroid version and after config the APN I was able to conect to internet just in EDGE mode, but one day after (and until now) I lost conection to internet in anymode My provider gave me some manual configuration and even resets my service but it didn´t work
Any idea to solve internet and flashtool problems?
Thanks a lot!
Click to expand...
Click to collapse
Dude! I had the very same problem as you when I installed MINICM6 back in August, and yes, I did watch that video showing how to install it.
But anyway, I repaired my phone and I'm on GDX since
Sent from my X8 using xda premium
U said big mistake without looking at more detail info.. so what was that big mistake? Missing requirements, steps, etc?
Who knows Maybe we can find clue there...
Sent from my Android using Tapatalk
When I said Big mistake I mean that i didn't look for more information about using ROMS i didnt know anything about kernels and basebands and looking in the web i found this amazing comunity and I'm learning a LOT about roms basebands kernels.
Well looking here (in the forum) i found a solution to my internet problem (actually I copied just APN type from a minixperia x10) and for the 3g issue i already changed to the correct baseband, tomorrow i will tested if the 3g is already working (I hope so)
And now i just looking for a stable ROM because the MiniCM6-1.0.1 is kind of buggy
Thanks to all for your time
---------- Post added at 10:30 PM ---------- Previous post was at 10:11 PM ----------
To be a litle bit more specific about the error, It was that i just followed all the steps in the 4 videos of a tutorial on youtube, I mean I never asked myself if that steps were the most adecuate for my device (obviusly it wasn't) The autor of the videos gave a link with a baseband for a E15i and my x8 is an E15a and for that i lost 3g
And about the internet problem... until now i dont know what was the exactly error, I mean what could happened to miss the internet conection form one day to the next day... The APN that I configured myself was working in MiniCM6 and just for one day worked on floyo hackdroid 2.2.5 and next day no internet conection (SO WEIRD) and just copying the APN type from other device (same provider) everything works fine until now.
Related
I installed GingerDX weeks ago.
I was quite happy with the results and I rarely found glitches with the software. Overall, the experience was great and I forgot the I am using an unofficial software for my Xperia X8. Great job guys!
But one problem bugs me. It is about my internet connection through my mobile network.
My Carrier is Globe Telecom, and I happened to call (customer service) them for about 5-8 times by now, and they manually configured my internet account for my phone. All the APN and necessary information has been configured, and my simcard is ready to be used for the internet. I have extra load (I'm using prepaid); but I can't connect to the internet. My "Data Enabled" is checked and so is the Power Control icon on my homescreen.
Globe said that it would be a problem in my phone and not from theirs.
I'm just asking...how can I fix this kind of problem. I always restart my phone and it does nothing. The E logo (with the arrows pointing up and down) doesn't appear in the notification area, even though I am getting a decent phone signal and clicking on the browser.
Please help me. Please. Thank you!
What is the version you are using?
There's a small test you can do in some free time. Back the GDX up using xrecovery or CWM, and install another ROM. Other than GDX or a newer/older version of GDX and check whether the problem is still there.
Put your SIM card to another phone and check from there if possible. If this step does not work, ask your operator's Contact center to hook you up with someone from engineering and ask him whether your number has been authorized for the APN you are using (this cannot be done by frontline staff!)
tharaka said:
What is the version you are using?
There's a small test you can do in some free time. Back the GDX up using xrecovery or CWM, and install another ROM. Other than GDX or a newer/older version of GDX and check whether the problem is still there.
Put your SIM card to another phone and check from there if possible. If this step does not work, ask your operator's Contact center to hook you up with someone from engineering and ask him whether your number has been authorized for the APN you are using (this cannot be done by frontline staff!)
Click to expand...
Click to collapse
I'm still a beginner here. What's CWM?
Can you please give me some other "stable" OS for my Xperia X8 to test with? I would be grateful if you do. I'm using the version 17 of GingerDX, though.
Thanks for the fast help!
CWM= Clock Work Mod recovery
Anyways, try any ROM and see whether data works and then you can start debugging GDX's data issues. Try a Froyo ROM like FroyoBread or KuyaDroid (which is Gingerbread).
i have the sam problem with the v21..Help me!
---------- Post added at 09:53 PM ---------- Previous post was at 09:53 PM ----------
having the same probl..with v21 help me!
i had a problem that everytime i try to enable mobile data it reboots the phone so i updated gdx again and i worked perfect...try using update.zip again
update zip where can i get that..or just flash the v21 again...
guys anyone i experiencing our phone SGAce problem "wifi error" ? almost 3 weeks suffering with my phone .. always says "wifi error" .. i tried all of these solutions i've been search like :
0. Use Static IP
1. *#*#526#*#* and *#*#232339#*#* - (says driver loading unsuccessful)
2. reboot phone
3. wipe data reset/ and wipe data cache
4. removing sd card / simcard
5. flash custom rom - ( i've already tried 4 custom)
6. flash back to stock rom
but all of these can't fix my Ace ..
Model : GT-S5830
Android Version : 2.3.4
Baseband Version : S5830DXKPB
Kernel Version : 2.6.35.7-perf-CL514579
BuildNumber : GingerBread.DXKPB
pls help me to solve my seriuos problem
THX XDA
It's a problem with the WiFi drivers....try taking the stock WiFi drivers....either that or you spoiled your WiFi hardware
This was sent from a Galaxy Ace. Problem?
SniperRyan said:
guys anyone i experiencing our phone SGAce problem "wifi error" ? almost 3 weeks suffering with my phone .. always says "wifi error" .. i tried all of these solutions i've been search like :
0. Use Static IP
1. *#*#526#*#* and *#*#232339#*#* - (says driver loading unsuccessful)
2. reboot phone
3. wipe data reset/ and wipe data cache
4. removing sd card / simcard
5. flash custom rom - ( i've already tried 4 custom)
6. flash back to stock rom
but all of these can't fix my Ace ..
Model : GT-S5830
Android Version : 2.3.4
Baseband Version : S5830DXKPB
Kernel Version : 2.6.35.7-perf-CL514579
BuildNumber : GingerBread.DXKPB
pls help me to solve my seriuos problem
THX XDA
Click to expand...
Click to collapse
yeps its a problem with ur wifi driver... dont panick ....
just do a wipe data factory reset (better by clockwork mod recovery ,if u have installed it and is rooted)or if it still exists JUST FLASH the stock rom via ODIN...here is a thread if u dont know flashing
http://forum.xda-developers.com/showthread.php?t=1034145
enjoy
w8... HOW THE WIFI DRIVER GETS DAMAGED!!!!
##after switching on wifi or hotspot wait some minutes so that the wifi or hotspot are fully active...
after that only shut them offf...
otherwise u are stuck the way u are now....
now you are free...go enjoy ur galaxy ace
Wifi wouldn't switch on when I was on stock it would give error like you said sometimes even after entering the code to load the drivers I had to restart my phone
Then I flashed cm7 and the problem vanished. Although when I reverted to stock the error was back
Be Kind everyone you meet is fighting a hard battle
jumbobombo said:
Wifi wouldn't switch on when I was on stock it would give error like you said sometimes even after entering the code to load the drivers I had to restart my phone
Then I flashed cm7 and the problem vanished. Although when I reverted to stock the error was back
Be Kind everyone you meet is fighting a hard battle
Click to expand...
Click to collapse
welll for that had u used a nandroid backup to revert??
Maybe the baseband is a problem. Try a different baseband and see. Since you are telling that wifi works in cm7, maybe there is a problem with your stock rom.
Aj.GaLaxY aCE said:
welll for that had u used a nandroid backup to revert??
Click to expand...
Click to collapse
Nop!! You can't revert from a cm rom to a stock rom by a nandroid backup you have to use odin
Be Kind everyone you meet is fighting a hard battle
i am having problems with wifi, too. Yesterday I installed Miracle v.4 and during 2 hours everything was fine. But then, it disconnected from my home wifi and it wouldnt connect again. always stuck at "obtaining ip address".
today i tried at the office, and the problem is the same. I tried rebooting the phone and the router several times. also tried with static ip, and then it connected, but i had no internet.
thx for all your comment , but , all solutions cant fixed my phone.. ( please help me
Re-flash another stock rom... And don't edit or replace SystemUI
Sent from my GT-S5830 using XDA
Hi all,
I AM also having the wi-fi problem. it not's works well in my home wifi or in my office. It's says:
obtaining IP address,but doesnt connect
it constantly tries.. gets disconnected.. plzzz help!!! And all the time when I tried the same thing is...
Device:Samsung Galaxy Ace S 5830
Country / Language: English
OS / Browser / build number : Android 2.3.6 gingerbread.
Baseband version : s5830xwkt7
I tink ur wifi hardware is fried nxt time try leaving ur wifi on for abt a few minutes be4 offing it
Sent from my GT-S5830 using xda premium
---------- Post added at 10:59 PM ---------- Previous post was at 10:56 PM ----------
@bfc1947 Maybe try using another rom culd be a faulty wifi driver
Sent from my GT-S5830 using xda premium
Can't turn on Wifi and Blueetooth, gives error
Hi, I just purchased a samsung galaxy ace gt s5830 that came from korea. The phone was initially working fine and had 2.2.1 froyo running on it. But this set did't allow more than 80 characters in text message and converted into an mms. I thought I should updgrade it to gingerbread so I downloaded gingerbread 2.3.6 and upgraded the phone via Odin. Since then, my wifi and bluetooth don't work. when i try to turn on the wifi, it says "Error". I have tried all possible solutions but was never successful. tried those codes like *#526*, *$528* and many other codes but no use. I also thought of going back to froyo 2.2.1 and downloaded a stock rom and flashed it but still the same error.
Now can anyone suggest a solution here so that either I can revert to the korean firmware (since I can't find one for korean region) or I can fix the wifi and blutooth error.
Please Please help!!! I purchased it to present it to my wife on her birthday but now its all messy
any of u try updating to 2.3.6
Update: Solved (just reflashed the ROM)
I have a problem here with my X8. So, after I have successfully unlocked my bootloader without the network problem, now I have a wifi problem. So what I did was: rooted my phone, unlocked the bootloader, applied a nAa kernel (before that I tried the MiniCM9 with the ICS nAa kernel), then I applied the custom ROM called JoyOS... In both cases(ICS-MiniCM9, and JoyOS) I have the problem when connecting to a wifi router, I cant use it. I know it sounds strange but I can connect normally with the wifi but still I cant use it... I mean when I try to open google.. or use anything with wifi (like syncing) I just cant... it says unable to connect to the internet. I am thinking its the unlocked bootloader problem.. but I am not sure. Can someone help with this please.
Maybe just reset router...
lol???
Thats not a problem with the router... I am using the internet via that router writing this reply.. please dont be stupid and post something smart.
EDIT:
Still waiting for a reply.. I really need a solution for this..
Have u tried connecting to a totally different router cuz that may be ur problem, I have a friend who had a similar problem with an android tablet that didn't like his router so give it a go it won't hurt to try
P.S did it connect when it was stock?
Sent through my X8
it did connect when it was on stock ... and I am not sure but I think it actually was working a little while I was using the MiniCM9 ICS ROM and on the same rom actually the problem has occured. Now I am not sure if it stopped working because of the unlocking and applying a new kernel or something else happened in the mean time.. Could it be I disabled wifi somehow? somewhere?
What rom are you using? i only say that because when i swapped from minicm9 to semc debrand engine both wifi and 3g stopped working but when i switched back to minicm9 it worked perfectly again.
Try a Full wipe + wipe dalvic cache (or whatever it is) and install the rom again, hope this helps
Now trying to flash miniCm9 again.. we ll see now.. will update in a few minutes
Update:
Great, , just flashed the ROM again and now working well. Thanks anyway for helping.
No problem glad i could help
hello there guys i'm here to ask you to help me save my " precious"
all begun when i was trying to install cwm on my roooted galaxy note xxlpy but the problem is once i've installed cmw , it doesn't work but more of this actually my wifi won't work , in fact it detect my wifi signal but when it comes to connect it can't connect and try continuously to get an ip adress and to authenticate
so i've restored default settings in the parameters , the super user icon went but the cwm still here and the wifi still not working , so please can anyone tell me how to make it work again !!!
thanks for your help
ps : sorry for my bad english , i'm french
rhazes said:
hello there guys i'm here to ask you to help me save my " precious"
all begun when i was trying to install cwm on my roooted galaxy note xxlpy but the problem is once i've installed cmw , it doesn't work but more of this actually my wifi won't work , in fact it detect my wifi signal but when it comes to connect it can't connect and try continuously to get an ip adress and to authenticate
so i've restored default settings in the parameters , the super user icon went but the cwm still here and the wifi still not working , so please can anyone tell me how to make it work again !!!
thanks for your help
ps : sorry for my bad english , i'm french
Click to expand...
Click to collapse
You can set static IP with the built-in Settings app(Wireless & networks, Wi-Fi
settings, menu key, Advanced).
Use this application.
http://www.appbrain.com/app/wifi-static/com.farproc.wifi.statIc
thanks for this answer , but i'm still wondering why before installing cmw , my wifi was working flawlessly , and now i'll have to install this?!
and also what about this damn cmw that's here and still not working, is there a mean to remove it?!
This is common issue after CF root, and occurs due to binaries
Install busybox, open busybox and install binaries inside busybox application, once successfull installation it shud work
Otherwise
Flash stock kernel - wifi will strat working again
then root - install busybox - install binaries, then flash CF root kernel.
thanks doc for your answer ,after reading it, i'm willing to flash the stock kernel , at least it'll remove me this Cmw, but i must confess that this operation scare me , heard a lot about the brick issues with the xxlpy kernel , so i need some advices :
1 - i've downloaded the rom but it's a no wipe one , will it remove the cmw and the super SU?! otherwise how should i do to remove it?!
2 - what are the risks and what should i do to avoid them
3 - if u cand send me some links about how to flash this rom and how to remove all from my phone i would be greatly grateful to you
thanks a lot for your answer and have a nice day
Which ROM you are using?
yes non wipe ROM also remove it, but m thinking just flash kernel not full ROM
thank you doc you're my savior , i've downloaded the N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5
so i was willing to install it , and where can i find the kernel ? it it better to use the kernel only or does this one ok also , btw i've deleted all on my phone so i don't mind
also other problem - as if the actual one isn't sufficient --, i'm trying to install the usb driver for my computer but can't install them , kies is on my computer but still not detecting my phone , any idea about it
thanks a lot for your help i'm attached to my keyboard waiting for your answer
Oh you hav already download then just flash downloaded rom with.pc odin(with pda tab)
Sent from my GT-N7000 using xda premium
the problem is that my computer won't recognise my galaxy note even after installing kies / drivers , is there a solution to this ? what should i do i order to use odin and flash this md5?!
i' m begining to be mad !!!!
thanks doc i'm waiting impatiently for your help!!!!
Wifi Probs after rooting Note
Hello
I am having the same issues after rooting my Note.
Basically I'm using the UK ICS 4.0.3 Rom from Sammobile - N7000XXLQ2_N7000XXLPT_N7000XEULP4
FRESH ROM INSTALL UNROOTED - NO APPS ADDED
Checked that wifi picked up signal and worked ok
Checked that data connection picked up signal and worked ok
Checked phone was registered on network and seemed to be ok
Pretty fast by all accounts !
*****************************************************************************************************************************************************************
However...
NOW ROOTED - using CF-Root - SGN_XX_XEU_LQ2 - v5.6
APPS ADDED FROM PREVIOUS CWM 4.0.3 BACKUP IMAGE
YellowTriangle Away V 1.70 used to clear counts etc
Checked that wifi picked up signal and doesn't work
Checked that data connection picked up signal and works ok occasionally
Checked phone was registered on network and seems hit and miss - registered one minute then not the next - unable to make calls - have to keep searching for networks manually - turning phone on / off / battery in / out !
Followed the advice from the from the post:
http://forum.xda-developers.com/showthread.php?p=29554858#post29554858 - regarding 'SPEEDMOD K3-11'
****************************************************************************************************************************************************************
Now when I open CWM manager app, I get the message "This version of CWM manager should be used with CF-Root v5.0 or newer. It appears you are running a different kernel.Various features have been disabled"
Also still - NO WIFI !
Just seems a bit odd ??
Don't know about you, but I'm wondering what else isn't working properly and is it actually worth rooting at all ??
rhazes said:
the problem is that my computer won't recognise my galaxy note even after installing kies / drivers , is there a solution to this ? what should i do i order to use odin and flash this md5?!
i' m begining to be mad !!!!
thanks doc i'm waiting impatiently for your help!!!!
Click to expand...
Click to collapse
Uninstall kies
Install only drivers
And change usb port
Sent from my GT-N7000 using xda premium
as i said before , wifi is working - hope so - since i can see the networks available around , the only problem is that it's continuously try to get ip and log in ,
now i'm worried about that damn usb that won't recognize my phone , and let me use odin to reinstall my system
if anyone has an idea i would gladly listen
thanks everybody
is there any mean to install the firmware i've downloaded without using odin?!
thanks for your answers
don't be panic and your issue is not serious.
you can use Mobile odin if you having root. if your root is working then try flashing kernel with mobile odin
Still NO Wifi - After UK ICS 4.0.4 Upgrade!
Downloaded ICS 4.0.4 from 'checkfus downloader' today
Product Code: GT-N7000ZBAXEU
Latest firmware: N7000XXLRK/N7000XEULP5/N7000XXLRK/N7000XXLRK
Modified: 24/07/2012 11:17:01
Filename: GT-N7000_XEU_1_20120724111617_83hlhgn7j9.zip.enc2
Installed using ODIN - rebooted, checked 'About Phone' - Version 4.0.4
However I have since rooted it using the CF-Root-SGN_XX_XEU_LQ2-v5.6-CWM5
Yellow Triangle 1.70 - worked and cleared the counts etc
Installed binaries via 'busybox'
(Haven't reinstalled - 'Speedmod K3-11')
and it still suffers the same 'NO WIFI CONNECTION' problem I had with ROOTED 4.0.3 ics with apps I'd installed via a CWM backup rom image
Any tips on how to get wifi to connect would be helpful - cheers
thaank you dr.ketan the word u've sent me relieved me because , indeed i'm panicked rofl - btw the fact of finding the right words to comfort people....mm are u a real doctor? -
i'm hoping truly that your words are the reality and not only to reassure me hhhhhh
right now i'm copying the md5 and the odin mobile pro 2.45 on the micro card , cross fingers and wish me good luck guys
right now i've installled mobile odin pro on my phone , but the problem is that it's sticked to the loading screen where it' says that it's checking super user support , and i have some msg from time to time at the bottom of the screen saying that mobile odin pro has been granted super user autorisation for interactive shell but still waiting so i'm begining to wonder if the root is alright , and so i'm asking
can i re - root my phone using the cmw zip and the busybox zip on an already rooted device?! if yes i'll do it right now
thanks for your help i'm waiting for your answer doc
It seems you have partially rooted device.
And that is the reason wifi is not working, i am saying this since long, i fear you won't brick device just for small issue.
Still i am saying once see there is enough space on system ROM? (check it with overview page of Titanium), i think in partial root titanium still works, as it uses own binary. if no 15MB spcace remove some non harmfull app e.g. arura live wall paper, youtube,Goggle+ this can be installed later.
After this again install busybox
open busybox and install from inside busybox
you should see msg 'succesfully installed'
then open superSU, if asked update binary too.
then try wifi shud work,
PS : yes I M ENT surgeon
glad to see that u're doctor too - i'm doctor in anesthesia reanimation , and we have good contact with surgeons since they're all the time funny - glad to see that u told me that my problem is a small issue and it won't brick my device , so i'm feeling a little more relieved , but still have to solve the problem
and there's some questions :
1 - when opening super SU i have this msg : the su binary needs to be updated , continue? how can i update them since wifi won't work? is there some specific files that i can update by the memory card?!
2 - i have a full unroot button in the super su settings , would it be a good idea to fully unroot the device to re root it after with the busybox?!
i'm on my way to download and install titanium i'll tell you about space on system rom once i'm done
thanks a lot again doc
rhazes said:
hello there guys i'm here to ask you to help me save my " precious"
all begun when i was trying to install cwm on my roooted galaxy note xxlpy but the problem is once i've installed cmw , it doesn't work but more of this actually my wifi won't work , in fact it detect my wifi signal but when it comes to connect it can't connect and try continuously to get an ip adress and to authenticate
so i've restored default settings in the parameters , the super user icon went but the cwm still here and the wifi still not working , so please can anyone tell me how to make it work again !!!
thanks for your help
ps : sorry for my bad english , i'm french
Click to expand...
Click to collapse
i had a problem like you , after installing a custom rom. i fixed my problem with changing modem of my rom
Ok so i have latest base 015 on my x8 unlocked boot loader and added kernel and custom rom Everything works on every rom i have tried.
However I get no signal on any of them yet i close bootloader and go back to stock kernel and rom and i get signal on phone
Followed the guide and my phone has below 11W29! I have 11W19 followed instructions to unlock on guide and everything says its done and has little r for unlocked boot loder and rom and kernel works but with out a netowork signal
any ideas how to fix this please.
what custom kernel you use?
I used X8_v08a-cm7_Alfs&djnilse.zip - with [ROM] GingerKC | v03 | nAa/Alfs [08.10.2012
However also tred different roms and kernel and still no network signal on it
I have another x8 and i have no problems on it done everything as instructed on other x8 owrks perfect however this other x8 i got does not and its been a pain
Maybe on the xda is some fix for unworking network connection... Do You search for it?
Arex780 said:
Maybe on the xda is some fix for unworking network connection... Do You search for it?
Click to expand...
Click to collapse
Yup however theirs no fix for them only searten custom roms had fixes for them and then one i have on one x8 works fine n fixes needed and when trying on this other x8 i got no joy
I think you did a mistake, i experienced that part but a year ago.
Common Problems:
1. My SIM Card is not recognised after unlocking phone with msm7227_setool2.cmd!
Ans: Redo unlocking procedure (step 5 onwards) using msm7227_semc.cmd.
Click to expand...
Click to collapse
Sent from my E15i using xda premium
Maybe your phone is not carrier unlocked..
so thats why it is giving the problem..
some people have that prob because forget to wipe dalvik cache..
or u can solve by restore it with msm7227_semc (u can find on xda) and its work!
or forget flash kernel and rom without simcard in the phone
Well not sure whats gone on but what ever i do for that rom or a few others will not work yet i can flash and it works on different ones found that the blue one works fine and wanted others but i will keep on trying. Thx for the help tho will keep trying with the info posted above. Just cant figure out why works on soem and others it gets no signal