I have recently procured an HTC Diamond mobile and is facing the following problem:
I have a Linksys Router at home. When I switch on the Wi-Fi in my Diamond, it gets connected to the router. In the status, I can see the signal strength, Tx, Rx rate etc. But when I open the browser (both opera & IE), the web pages does not open. Error message stating check the url or does any other programme using the internet works? appears. Even my weather does not get updated. Using the same router, I am able to connect my laptop as well as my desktop to Internet.
When my diamond is synced using active sync, my mobile is able to connect to the Internet & Weather application also get updated.
Kindly help me to resolve this issue and make diamond connect to net using wi-fi.
Thank you in advance.
I have the same problem sometimes
I just changed parameter in settings -> connections -> wireless lan -> power mode -> "best performance" instead of "best battery" and it seems to work now.
I'm new to WM, so I don't know if it's a bug: when I don't use my phone I press the power button, or I wait it to go to "sleep mode" in 40s.
When I press power button to reactivate the screen, I can see in the first seconds that the wlan was disconnected and connects again.
So it seems that wifi is always disconnected when the phone is in sleep mode? That means no mails can be received ? Can anyone confirm?
Thanks
Hi there for both of you!
I had a connection problem with my Diamond at home. It was almost the same as tkak just I couldn't figure out whether ActiveSync connects or not. I managed to bypass this to set my routers DHCP timeout from 1 week to 3 hours and it all went away. The network status showed periodic connect/reconnect during the problem so it might be a different prob than yours.
Peio64:
WM6 keeps WiFi connection asleep during sleep mode. Imagine the battery usage if it was connected to WiFi all the time. So be happy with that and beside it is usable. WiFi automatically tries to connect to the closest hot-spot if it was connected before each time you switch on. Normally it shouldn't take more than 5-10 seconds and the whole process can be followed on the top bar.
Mails: Use DirectPush and GPRS connection and e-mails will arrive instantly. Google for setting this up. With Wifi I dunno - if you schedule ActiveSync for a periodic check whether your WiFi will be used or a new GPRS connection. I think GPRS can be used while the device is asleep but I'm not sure. Someone should test this. Probably whichever is quicker to build up a connection will be used for data transfer. (Note: on some forum I read that if you disable GPRS auto check with a tweak battery will last longer so I guess this means that GPRS is always connected.
Regs, Cina.
Does your diamond obtain an IP adress from your router, and is the connection setup as 'connects to internet'?
cina said:
Hi there for both of you!
Peio64:
WM6 keeps WiFi connection asleep during sleep mode. Imagine the battery usage if it was connected to WiFi all the time. So be happy with that and beside it is usable. WiFi automatically tries to connect to the closest hot-spot if it was connected before each time you switch on. Normally it shouldn't take more than 5-10 seconds and the whole process can be followed on the top bar.
Mails: Use DirectPush and GPRS connection and e-mails will arrive instantly. Google for setting this up. With Wifi I dunno - if you schedule ActiveSync for a periodic check whether your WiFi will be used or a new GPRS connection. I think GPRS can be used while the device is asleep but I'm not sure. Someone should test this. Probably whichever is quicker to build up a connection will be used for data transfer. (Note: on some forum I read that if you disable GPRS auto check with a tweak battery will last longer so I guess this means that GPRS is always connected.
Regs, Cina.
Click to expand...
Click to collapse
Thank you for your answer,
I had a SE P1i before, and wifi was connected all the time with push mail. With the diamond and its weaker battery, I set up my mails schedule to connect every 15 min so wifi only needs to be active every 15min, even in sleep mode, I don't want it to be connected all the time this is of course a battery waste.
HSDPA is connecting in sleep mode there's no problem with that, I just wish to use wifi for mails when I'm at home as my data plan is unlimited for web surfing but only 10Mo/month for pop/imap connections.
BTW I don't use the "keylock" option, is it different from sleep mode in this case? I can't see the advantage of keylock versus sleep mode
I had an ETEN M600 for ages before and I found that for sync it always used GPRS even if WiFi was available. The cause for this was GPRS was available while device is asleep so it can start syncing immediately after wake up (does it needs to wake up for sync?). So you probably have to switch GPRS (HSDPA) off while you're at home.
Keylock is for locking hardware buttons and touchscreen while it is active. (You won't dial up anyone from your pocket). It has nothing to do with sleeping just if you set up the registry tweak the device get locked (Keylock software is started) if you press power to send it to sleep. (I've almost written "off" but it is obviously not true - you can switch it off with a long press on power = soft reset).
Hope this helped a bit.
Cina
Okay thank you, I checked and HSDPA is connecting every 15min in sleep mode even with wifi ON. If I switch data off I suppose nothing connects and no mail is received, which is I think it's a weird behaviour.
By the way, I have set my data connection to swich off 10 seconds after not being used, and it works perfectly and reconnects automatiquely when it needs to. But for the wifi I can find that option, it's stays connected all the time when I use the phone, even if I don't need to. Is it possible?
Maybe it's due to the fact that it's always checking if there are new networks? On Symbian UIQ3, you can pre-configure networks, give manually priorities for each networks (1.Wlan work, 2.Wlan home, 3.3G etc..) and for each application (web, mail, etc). When the phone connects it checks if the network "1" is available, if it's not it checks the network "2", and once it's connected it doesn't check anymore. Is there a WM6 advanced network tool like that?
(Sorry for my english)
I did the following and now it gets connected to the web:
I just changed parameter in settings -> connections -> wireless lan -> power mode -> "best performance" instead of "best battery".
I do not know why this needs to be done like this.
Thankyou all for resolving my problem
I'm experiencing problems connecting to my WL Router (DrayTek 2820n) using WiFi when the router is set to Auto instead of to a specific channel. I've noticed from some threads for other mobiles that people are exprience similar problems. Does anybody knows what is the story around which channels are supported on WiFi: 1-11, 1-12 or 1-13. My router is set to 13 by default. In addtion to that Diamond has problem to connect to some channels even in the 1-11 range. So how can I check, which channels are supported and for which region?
Edit: I did further testing and it became obvious that when using Auto channel selection on the router, Diamond wouldn't connect. When selecting manually any channel between 1-11 it works OK, but when selection channels 12-13 it stops working, which makes me believe that the Diamond doesn't have support for the channels for non-US regions.
Does anybody have any idea how to change wifi region to support 12-13 channels as well? So far I couldn't find anything on the net that would help me doing it. Is it possible that it might be WM 6.1 issue and not Diamond?
HI I am actually having a diffirent issue but still related to wi-fi. When my phone awakes from sleep, it promts me to connect to my wi-fi server at home, when it was already connected jus minutes before. I have to re-enter the pass phrase everytime it awakes from sleep. This does not seem normal as my 6.0 touch didnt do that.
Any takers on this?
For more channels, it depend of US version or EU version. You need to changer your firmware but the problem is that in France for Internet you use PPoA and Belgium PPoE and I do not know if in the US they use the same so you will probebly losse your ability to connect to the Internet. Having more channels is not interesting because you need a hope of 5 between channels ( ex : ch1 + 5 = ch 6 and ch6 + 5 = ch11) between ch1 and ch6 place a ch11 for avoiding interferances. In 802.11g that is a question of scheme.
Sorry for my poor English.
Problem connecting to home network wifi
Hi, i've been using diamond to connect to my wifi home network but since few days is not possible anymore even if nothing was changed in the settings of the router.
The phone recognize the network as available, i push connect, it comes connecting but instead of connecting to the netwok it goes back to available.
Password is correct and the setting are the same as few days ago.
Any idea which setting should be modified?
Thanks in advance!
Panco76
Hello everyone,
I have one problem with my diamond. I disabled the "data transfer" with the improved comm manager. I usually use wifi when i'm home, however, i've seen that even though wifi is active, HSDPA connection is activated as well so i got charged, this sometimes happens when updating weather data or downloading emails.
Anyone with the same problem?
Yes - having he same problem.
I have WIFI at home and at work - so i want to use GPRS only when i am outside. never managed to do this - except when i kill GPRS fully - and even then Opera, the weather and push-mail wont work. :-(
WiFi Channels 12-13?
I need to bump up this issue again.
I can't find anywhere in this forum how would you change your WiFi channel range from US to EU (i.e. 1-11 to 1-13). My Diamond was purchased in Australia and I was hoping that the new SW upgrade would rectify that, but it looks to me that's not the case. Any idea if that can be done in registry?
Thanks.
Change Channel range from 1-11 to 1-13
***Bump***
Has anybody got any ideas how to increase the channel range from 1-11 to 1-13?
Hi, I am having a seperate problem from all that are listed. I have the linksys rangeplus router, and my Diamond wont even detect my network when it searches, yet my computer and PS3 do fine. Can anyone help me?
another problem...
Hi,
i have a problem with the wifi on my Diamond aswell..
I have a router at home which is encrypted. When I try to connect to it, I type the encryption key and it says Connected but i cant surf any pages. When i go back to wifi settings my home network switches between Not available and Connecting...
However, when i remove the encryption, everything seems to work fine. Since i dont want to treat my neighbors with free internet, does anyone have any tips for me?
(it is set to Best performance... +i'm sure i enter the right key...)
Thanx
The same over here... I found out, that some of cooked ROMs had this problem, but official worked. Before I couldn't connect via WPA2-PSK AES, all other encryptions worked. Until now... I tried to flash official ROM and RADIO, but it doesn't work anymore. I'm pretty sure it must be hardware problem. I need to send my Diamond to get fixed, but... The closest repair centre is in Prague (GSMobile)
!!!!!!!!!!!!!BUT BE AWARE!!!!!!!!!!!
I owned previously Qtek8310. After I send them my Qtek to replace the joystick, it came back with broken motherboard... This repeated 3 times and everytime they broke something else. I've got my Qtek8310 back as a total crap, destroyed and scratched... I called and send a claim to HTC Europe in London, but nothing happened since then. I don't believe them anymore. If you love your Diamond avoid to get it fixed in GSMobile!
Hi Folks,
I'm trying to solve this annoying (big) problem.
I have CM7.2 by Xperiafan V5 as ROM
and X8_07-ICS_Alfs as kernel.
but this problem happened also in other ROMS GDX mainly used up 1 week ago.
The problem is: I use my wi-fi connection for a while, even 3-5 days. No problem.
Then when I reactivate wi-fi it seems looking for I dont know what and it rest activated but not connect my network.
I tried to change advanced settings: channels, rescan...
Nothing works...
The only solution is:
1) I have to manually delete all networks
2) disable wi-fi
3) then enable it again so it this time rescan correctly the networks
4) re-select my network
5) re-insert the pwd.
Sometime, as 1 time on 5-6, even this dont works, so I have to add after point 1 do a REBOOT and it works :-/ :-| :-/
Some suggestion? THX a lot!!!!
I have the same problem but I,switch the Wifi off and re activate it I find networks.
Sent from my E15i using xda premium
this happened to me...
try this https://market.android.com/details?...nBlcnNvbmFsLmpoamVvbmcuYXBwLldpRmlQaWNrZXIiXQ..
enable wifi using 'stock' wifi on mobile, and scan network with this... I have no problems with this anymore
Which of WiFi security type do You use ? There are problems with gaining IP address from WPA/WPA2-PSK.
I have problems to, but what I'm doing is:
1). Connect [it's telling me, that it's out of range]
2). I simply press "scan" and that's all
Hi all,
Is there anyone here using a Galaxy Note with Idea in Kerala (specifically Trivandrum)?
I am having real trouble connecting to Idea's GPRS net, with the Note insisting that it cannot connect to the network (data only - voice works perfectly).
This happens with both the E (GPRS?) and H (3G?) data indicators. The arrows either remain dark, or the down arrow remains orange (up arrow green). Is this normal?
I have downloaded and installed all the configuration messages sent to me by Idea when I first inserted my SIM.
I currently have four listed access points:
idea_gprs
idea_internet
idea_mobile
idea_mms
No matter which one I select to use, the Note keeps insisting there is a network error.
So I cannot use Google Maps for driving directions, or even Voice Talk in driving mode, because I keep getting the message:
"Cannot connect to server. Please check your network settings and try again" in a dialog box on the Voice Talk screen which takes me to the network settings.
This is especially true in Voice Talk.
Please help.
I've faced this issue a few times on idea kerala network usually between 11 30 pm and 2 am. It's a network issue. you simply have to wait it out , in a few hours it will start working again.
I think idea's apn is "internet" not "idea_internet"... change the settings and try again...
have you tried it with other networks providers? check if 3g is working to make sure this issue is not phone specific.
Thing is, the connectivity has been spotty at best, but since the past couple of days, I have not been able to connect at all.
gps
pillainp said:
Thing is, the connectivity has been spotty at best, but since the past couple of days, I have not been able to connect at all.
Click to expand...
Click to collapse
try gps fix from market
Samsung Voice Talk
Right.
As far as I can see, Samsung Voice Talk is the only app that regularly has trouble with Idea's GPRS/3G.
Generally service is so poor and connectivity so slow that I initially thought it was a device issue.
However, on further investigation, I find that Voice Talk, while it works perfectly on WiFi, will not do so on GPRS/3G.
Everything else connects with blazing slowness, thanks to Idea.
The one constant is that whenever I try to use Voice Talk under Idea, it immediately throws the error:
"Unable to connect to server. Please check your connection settings and try again."
This dialog box has a button to the connectivity settings menu.
However, no matter what connection I choose out of idea_gprs, idea_internet and idea_mobile, Voice Talk continues to throw the same error.
Any ideas?
I am thinking maybe delete and re-install all the Idea APN's.
Anything else I should/could try?
Thanks in advance for all your help.
NPP
I have a very strange problem.
If i connect true wifi i can connect to google network (upper richt wifi signal color goes blue).
But if i turn of wifi and want to go true 3g the signal bar stays white, i see the send and receive icons go on but i can not surf the internet because it does not connect to the google network.
I entered the right APN settings, i restored an older ROM.
/edit is just did a full wipe + all caches + install other ROM, and i still cant get connection.
What else can i do ?
Is my phone broken ?
Which rom you are on?
Sent from my GT-N7000 using xda app-developers app
Problem solved, seems my provider was the problem, 30 min. on the phone and some checking from their side and the problem is solved :good:
hi,
i installed cm11 and cm12 on my Motorola droid 4 and in both i have the same problem, when i use the wifi sometimes the internet stops in the mobile but the wifi is still connected, when i turn the wifi off and on again it come back. i don't have this issue with cm13 but android 6 is heavy on my mobile. i tried some solutions like delete /data/misc/wifi files and reboot, change wifi advance settings, nothing works.
when i download my apps from the store randomly the internet stops but the wifi keep connected and sometime it come back by it self, but mostly i have to turn on and of the wifi or reconnect again to the network.
also i make factory reset before install the rom, i used these roms (cm-11-20150201-NIGHTLY-maserati.zip, cm-11-20150901-SNAPSHOT-XNG3CAO3G0-maserati.zip and cm-12.1-20160120-NIGHTLY-maserati.zip)
is there any solution for this issue? please help.
thx