Related
hey guys
My nexus one is stuck on 4 colored X logo.
last night i was downloading apps from market and battery get discharged and phone get off..than i connect the charger and power on phone than it show me 4 color X on screen only..
i have tried clear storage but no work..
can any body tell me how to solve this problem ..
my nexus one is on android 2.2 n bootloder is 5.08
help me soon and thank you in advance
Ok let me tell you if u have the same problem than do as the steps..
i had this problem after googling long time i found this solution ..
1st check ur hboot 0.33 or 0.35??
my hboot is 0.35.0017 and i am on froyo 2.2 stock is FRF91.
just download the PASSIMG for FRF91 from
http://shipped-roms.com/download.ph...on_KT_KR_2.15.1010.2_FRF91_release_signed.zip
after download rename it "PASSIMG.zip" than put it on root of sd card..(formatted by fat32)
now put phone is bootloader mode by pressing vol up + power button
than fastboot verifies passimg file and ask you to flash this rom
now press vol up (yes)
than wait for 5 min to flash this rom on ur nexus one..
reboot and wait for 5min and it and done...
if u still not boot normal than again go to boot mode
select recovery
when u see trangle logo and android than press vol up +power buttong
than recovery menu show up
than wipe user data
and wie user catche
reboot
done..
swapniladsure said:
hey guys
My nexus one is stuck on 4 colored X logo.
last night i was downloading apps from market and battery get discharged and phone get off..than i connect the charger and power on phone than it show me 4 color X on screen only..
i have tried clear storage but no work..
can any body tell me how to solve this problem ..
my nexus one is on android 2.2 n bootloder is 5.08
help me soon and thank you in advance
Click to expand...
Click to collapse
Have you tried booting into recovery? Power+volume down...
Did you try to boot without the SD card? It helped me once.
Assuming you are running a custom recovery image, go to it via the bootloader menu (Turn phone on while holding volume down, then navigate to recovery using the volume buttons and selecting recovery using the power button). You should then be able to flash the same ROM you currently have installed. If however this is a completely stock device then you could run PASSIMG.zip via the bootloader to save your current install. If you need more info just ask
i cant able to access recovery mode
Hollow.Droid said:
Assuming you are running a custom recovery image, go to it via the bootloader menu (Turn phone on while holding volume down, then navigate to recovery using the volume buttons and selecting recovery using the power button). You should then be able to flash the same ROM you currently have installed. If however this is a completely stock device then you could run PASSIMG.zip via the bootloader to save your current install. If you need more info just ask
Click to expand...
Click to collapse
hey friends..
i can access bootmode but when i select recovery option by selecting power button than phone get restart and shows 4 color X again...
than i have flash to recovery "RA nexus one v2.1" to install custome rom...
but same it get restart when we select recovery option
help me what to do
Wipe everything and see if that does it.
Carloswithac said:
Wipe everything and see if that does it.
Click to expand...
Click to collapse
how to wipe??
where is wipe option...let me tell u that i cant able to access recovery menu ..without recovery menu i cant wipe or flash the phone??
is that true?
If you can flash a rom use 2.1.1 not 2.1. Assume you are doing that thru fastboot from pc.
Also, try the 3 finger reboot to get to recovery.
Hold down pwr/vol-/trackball at sametime until phone boots into bootloader, then navigate to recovery option. Then wipe all and restore a good bu. If this happened while dl'ing apps, one may be bad. Get all of them off phone and do one at a time.
Ken
i cant able to access recovery
rugmankc said:
If you can flash a rom use 2.1.1 not 2.1. Assume you are doing that thru fastboot from pc.
Also, try the 3 finger reboot to get to recovery.
Hold down pwr/vol-/trackball at sametime until phone boots into bootloader, then navigate to recovery option. Then wipe all and restore a good bu. If this happened while dl'ing apps, one may be bad. Get all of them off phone and do one at a time.
Ken
Click to expand...
Click to collapse
dude i cant able to access recovery menu...
when i press power button to get in recovery menu my phone get restart ....and stuck on 4 color X logo...
is there any solution to access recovery menu?? ..my phone get restart when click on recovery on bootloder
Ok, understand now.
You may have some options thru fastboot and the pc. Do you have SDK installed on pc. I am not good at that, someone else may have suggestions along those lines. Unless, as I asked, you already have used that method to flash amon ra 2.1.
If you can thru fastbboot with SDK I would still flash amon 2.1.1
Ken
rugmankc said:
Ok, understand now.
You may have some options thru fastboot and the pc. Do you have SDK installed on pc. I am not good at that, someone else may have suggestions along those lines. Unless, as I asked, you already have used that method to flash amon ra 2.1.
If you can thru fastbboot with SDK I would still flash amon 2.1.1
Ken
Click to expand...
Click to collapse
i have flash recovery file of amon 2.1.1 but after flash recovery problem not solved......it still get restart when i select recovery from bootloder mode...
help me
I am out of ideas, sorry
Someone will get you going
Sounds like you are using SDK, it may be the way to wipe and get back to an original phone state, then reupgrade. I don't know sdk very well.
Did you try the other idea of trying to get to recovery with sd card out of phone. If you do that you may want to back it up while out of phone if you have a sd card reader
Good Luck and wait for more help
rugmankc said:
I am out of ideas, sorry
Someone will get you going
Sounds like you are using SDK, it may be the way to wipe and get back to an original phone state, then reupgrade. I don't know sdk very well.
Did you try the other idea of trying to get to recovery with sd card out of phone. If you do that you may want to back it up while out of phone if you have a sd card reader
Good Luck and wait for more help
Click to expand...
Click to collapse
okkkk
thanks
Why does this thread say solved??
Just restore a stock image.
Follow the wiki guide for unroot/restore. Use the passimg method, with the FRG33 zip, which can be found by following the link on the word "here" on step 2...
http://forum.xda-developers.com/wik...des_&_Tutorials#Unroot_.2F_Restore_your_Nexus
Sent from my Nexus One using XDA App
I see you solved it on another forum... :-/
Sent from my Nexus One using XDA App
Thanks for your input DR
The back to stock and passimage was where I was thinking he needed to go. But, know nothing about doing that without a lot of research of my own.
Anyway glad he got it--what did he do to fix
ken
Looks like he did exactly what I posted. Funny thing was, it was a thread on another forum, where I had suggested the same thing to someone else, and he'd picked up the trail... xD
Sent from my Nexus One using XDA App
Glad he got it anyway
THANK YOU
Thanks man you r great , i have spend 24 hrs on this but only your method works . Thanks again
really really thanks
you saved my 3000 bucks
Where can i find fastboot instructions?
Hi there,
I hope somebody can help me with this.
I have a htc IS S-off, rooted and running with a custom ROM (the mike1986 ROM, which is incredible!!).
Yesterday, my kid took my phone and start "playing" with it and when I´ve realized it, it was to late... He had entered into the recovery (Clockworkmod v3.0.2.6) and deleted some important/ sensitive data (i guess).
The situation is that, now, the phone doesn´t start working. It just stucks in the white screen with the HTC logo.I´m able to enter into the Hboot and, which is more strange, into the Clockworkmod recovery but when I reboot the system it just doesn´t start.
I´ve tried to reflash that ROM and other ROMS, but the result is always the same (Which gives me to the conclusion, speaking from my absolutely ignorance, that it shoudn´t be a ROM problem...).
I´ve also tried to make a "Factory reset", but the result is the same.
Important: When I enter into the recovery, it appears different lines of tex2t informing that: "E: can´t mount cache/ recovery/ command, log & last log. I´ve also browsed in the "advance" options of the recovery, and the system appears always unmount, and it doesn´t allow me to mount it (I don´t know if this is important or not).
Does somebody have an idea about how to fix this problem?
I would really appreciate if somebody could help me with it.
Thank you in advance!
Go to the mounts and storage menu ... format everything except your sdcard and flash mike's rom again ... see if it pops out an error ... should be fixed now ... temme if the recovery says anything wierd ...
Sent from my Incredible S using XDA App
If things dont work out ... here is a last hope-
*take the rom.zip from a RUU
*rename it to PG32DIAG.zip
*mount your sdcard to your pc in CWM recovery from the mounts and storage menu
*paste the zip unto your sdcards root folder
*reboot into bootloader and it will ask you if you want to update ...this will revert to stock and you can start the whole rooting process etc again
Also if you are alpharevx soff ... you will need a goldcard ... but not if your are xtc soff
Sent from my Incredible S using XDA App
i am having the same problem except i have S-ON and i cannot do anything. I tried installing CWM through Command Prompt and it says "FAILED-Remote signature verify fail"
I dont know what to do with this phone now. Its Stuck at erWHite HTC boot screen, Goes into HBOOT and FASTBOOT, and Recovery but thats it.
Please help.
iceman14nn said:
i am having the same problem except i have S-ON and i cannot do anything. I tried installing CWM through Command Prompt and it says "FAILED-Remote signature verify fail"
I dont know what to do with this phone now. Its Stuck at erWHite HTC boot screen, Goes into HBOOT and FASTBOOT, and Recovery but thats it.
Please help.
Click to expand...
Click to collapse
You cannot install CWM without S-OFF. What else have you done to get your phone in the state it is in.
I have a dincs in the same state. It's stuck in a boot loop and won't do anything. Spent 20 hours trying to fix it and still no luck
--------------------------
On a side note. If he can not do anything with his phone being s-on could he not just wait till later this month and s-off through HTC since that will be an available service very soon?
Sent from my HTC-Z710a using XDA Premium App
Thumper0G said:
I have a dincs in the same state. It's stuck in a boot loop and won't do anything. Spent 20 hours trying to fix it and still no luck
--------------------------
On a side note. If he can not do anything with his phone being s-on could he not just wait till later this month and s-off through HTC since that will be an available service very soon?
Sent from my HTC-Z710a using XDA Premium App
Click to expand...
Click to collapse
Ok what have you done to the phone to get it into this state? Have you gained S-Off? Are you trying to install ClockworkMod? More info please!
I believe I tried a custom Rom and did something wrong. Radio or something. No access to recovery and lost s off
Sent from my HTC-Z710a using XDA Premium App
Thumper0G said:
I believe I tried a custom Rom and did something wrong. Radio or something. No access to recovery and lost s off
Sent from my HTC-Z710a using XDA Premium App
Click to expand...
Click to collapse
Ok thanks. Since you have a Bell Mobile IncS, have you tried flashing the official BM GB RUU? That should at least get your phone going and usable.
Sorry for the late reply. I was away camping. Excellent. I will try it out and see what happens. I'll post results tonight
Sent from my HTC-Z710a using XDA Premium App
I actually ran the exe without extracting the Rom.zip and it worked perfectly.
Sent from my HTC-Z710a using XDA Premium App
I really need help with my bricked HTC incredible S!!
was using clockworkmod and cyanogen,decided to flash a android revolution hd rom, intsalled super wipe and flashed it ,then flashed the rom...now phone stuck at htc logo and cant go into clockworkmod recovery,the problem is i left my phone in usb while the flashing ...
..
so decided to format sd and place the PB13IMG.zip on root of sd to reflash rom...still not working !
computer cant detect usb when tried to connect.tried installing drivers,still cant get into recovery....i am using a s-offed htc incredible s...Please help!!!!
will sending phone to htc void warrenty?if so will they repair and how much they will charge?
Your help is much appreciated ...thx !!!
kaysen said:
was using clockworkmod and cyanogen,decided to flash a android revolution hd rom, intsalled super wipe and flashed it ,then flashed the rom...now phone stuck at htc logo and cant go into clockworkmod recovery,the problem is i left my phone in usb while the flashing ...
..
so decided to format sd and place the PB13IMG.zip on root of sd to reflash rom...still not working !
computer cant detect usb when tried to connect.tried installing drivers,still cant get into recovery....i am using a s-offed htc incredible s...Please help!!!!
will sending phone to htc void warrenty?if so will they repair and how much they will charge?
Your help is much appreciated ...thx !!!
Click to expand...
Click to collapse
what u mean u can't get to recovery?
my basic procedure is vol down + power, without usb plugged, then recovery, and then flash a rom/backup from SD
its allways worked 4 me, even in different phones
mrkekson said:
what u mean u can't get to recovery?
my basic procedure is vol down + power, without usb plugged, then recovery, and then flash a rom/backup from SD
its allways worked 4 me, even in different phones
Click to expand...
Click to collapse
i can get into Hboot,but when i click recovery,it goes to htc logo and stucks there.....
kaysen said:
i can get into Hboot,but when i click recovery,it goes to htc logo and stucks there.....
Click to expand...
Click to collapse
my phone doing it when i have the usb plugged in, did adb see it btw? u might push a new recovery there
1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
faresr said:
1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
the 200 dpi setting does not work on the Thrill, which is why you are stuck in "bootloop"
faresr said:
1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
Well looks like you're kinda screwed since you don't have clockwork installed, I'm not sure if you can install a new ROM... but have you tried EVERYTHING in android recovery?
If you don't know how to get to recovery... it's Hold down volume key + 3d + power, until it vibrates then use arrow keys to move around and 3d to select if you dont have clockwork...
faresr said:
1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
Do you havet the emergency mode like most LG smartphones?Here is how you check pull out the battery and the plug it in(so your phone turns off) and then hold down the volume up +voulume down and power button if it worked you should see a yellow screen and a "Emergency mode!!" title.Then google for a kdz update tool and a kdz firmware for YOUR phone.You will also need the LG mobile united drivers.If you are on windows go to control panel and disable the lg modem.Then connect your phone(in emergency mode) to the computer open the update tool then click on select KDZ and navigate to your KDZ then in phone mode select emergency_something iys the only one.Than click flash KDZ and after about 5min your phone should reboot and it wilk work.Its importiant to note that you will lose everything on your phones memory its like you flash a rom you start out fresh you also loose root.Good luck!
Sent from my LG-P350 using XDA premium
faresr said:
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
About the ADB it shows "device not found" because you didn't enable usb debugging.
Sent from my LG-P350 using XDA premium
Your gonna need to flash the .bin file for the thill
Thrill 4g on O3D
https://rapidshare.com/#!download|2...391931|R~E48599C3AAD1D44505C904C6E6A52A13|0|0
Thrill 4g on O3D
Download the above file then go to o3d forum general section sticky about how to flash .bin we dont have a .kdz for this phone so you gotta do it with the .bin
Thrill 4g on O3D
hoskopico said:
Download the above file then go to o3d forum general section sticky about how to flash .bin we dont have a .kdz for this phone so you gotta do it with the .bin
Thrill 4g on O3D
Click to expand...
Click to collapse
Ok thx I didn't know that it was different sorry if i made any confusion
Sent from my LG-P350 using XDA premium
Dont be sorry im just trying to help ya out our device has zero support from LG. When you select the files to flash use both the .bin and fls to flash you gotta find the P925.dll i think its in the dev forum here i dont remember which post though
Thrill 4g on O3D
Try the installing gingerbread and back to stock thread i think its in the mediafire download on there
Thrill 4g on O3D
I don't think i have the emergency download mode... I tried the button combination but it didn't work... so I still can't get my computer to recognize my phone to do anything...
Or try flashing a kdz for p920 then do the bin flash to get it back to stock froyo cuz you have to install the driver with phone pluged in and recognized
Thrill 4g on O3D
hoskopico said:
Dont be sorry im just trying to help ya out our device has zero support from LG. When you select the files to flash use both the .bin and fls to flash you gotta find the P925.dll i think its in the dev forum here i dont remember which post though
Thrill 4g on O3D
Click to expand...
Click to collapse
I know what you mean LG doesn't really care about mine device too.It's like they are nice untill you buy their phone.After that they don't care.
Sent from my LG-P350 using XDA premium
http://www.danasoft.com/ sig/****yeah287168.jpg
faresr said:
1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
Im having the same problem as the person before me, but my phone is stuck on the lg logo screen. My phone is rooted and I do believe I have installed clockworkmod when root manager asked me to. My phone froze on me while going through the root manager app, when I tried formatting it through the reboot screen I ended up with E: can't mount CACHE:recovery/ command, E: can't mount CACHE:recovery/log, and E: can't open CACHE:recovery/log.
I've tried following instuctions from this site: http://www.lg-phones.org/how-to-flash-lg-thrill-4g-to-android-2-3-gingerbread.html
Until the last one cause i don't have an option to instal stuff from my sd card
I've also tried this one: http://http://forum.xda-developers.com/showthread.php?t=1270832
but again I have no option of the sd card or running abd commands
only options i have are:
reboot system now
wipe data/factory reset
wipe cache partition
wipe cache partition and package recovery
wipe nv dynamic partition
tbcxfallen said:
Im having the same problem as the person before me, but my phone is stuck on the lg logo screen. My phone is rooted and I do believe I have installed clockworkmod when root manager asked me to. My phone froze on me while going through the root manager app, when I tried formatting it through the reboot screen I ended up with E: can't mount CACHE:recovery/ command, E: can't mount CACHE:recovery/log, and E: can't open CACHE:recovery/log.
I've tried following instuctions from this site: http://www.lg-phones.org/how-to-flash-lg-thrill-4g-to-android-2-3-gingerbread.html
Until the last one cause i don't have an option to instal stuff from my sd card
I've also tried this one: http://http://forum.xda-developers.com/showthread.php?t=1270832
but again I have no option of the sd card or running abd commands
only options i have are:
reboot system now
wipe data/factory reset
wipe cache partition
wipe cache partition and package recovery
wipe nv dynamic partition
Click to expand...
Click to collapse
You don't have clockwork then.That is your stock recovery.I had this problem too.I flashed the wrong recovery and i got stuck on the LG logo.I fixed it using fastboot flasher idk is it the same combination but on my phone it is volume up+call+power button.Uf it is correct you should see a sign saying fastboot mode udc_start or something like that then use the fastboot flasher to flash a recovery image for your phone.After the flash is complete reboot your phone but first do a NORMAL boot so you can see if the problem is solved.If it worked then you can safely boot into recovery.
Sent from my LG-P350 using XDA premium
Thank you for your support guys, but as it was to difficult, I just got a new one from at&t
I am in similar situation but I am rooted AND I have CWM on my phone. I can boot into recovery just fine and install from sd card and all that jazz but when I try to boot normally I don't get past the LG logo. It just hangs there forever. Do I just have to get a flashable ROM onto the SD card and boot into recovery and flash??
I have already tried wiping data, cache and dalvik to no avail.
Any suggestions??
cwburns32 said:
I am in similar situation but I am rooted AND I have CWM on my phone. I can boot into recovery just fine and install from sd card and all that jazz but when I try to boot normally I don't get past the LG logo. It just hangs there forever. Do I just have to get a flashable ROM onto the SD card and boot into recovery and flash??
I have already tried wiping data, cache and dalvik to no avail.
Any suggestions??
Click to expand...
Click to collapse
What did you do?When did the problem start(I mean after doing this or that)
Sent from my LG-P350 using XDA premium
nerot said:
What did you do?When did the problem start(I mean after doing this or that)
Sent from my LG-P350 using XDA premium
Click to expand...
Click to collapse
I rooted phone, everything fine. I flashed CWM, everything fine. When I rebooted system from CWM then phone booted but hung at the LG logo. Now only thing I can do is boot into recovery or boot to the LG logo for hours... Don't even know how this could have happened as I haven't flashed anything, just root and CWM...
PROBLEM IS FIXED WITH THE HELP OF USER: daorderdillon
Hello guys, i'm searching for a solution to my problem (for several hours now) but i cant find anything useful. My chrome browser is full of tabs now
What the problem is, i had Android revolution rom installed on my HTC One. I wanted to try the Maximus rom so i downloaded it straight on my HTC. I rebooted into recovery and made a nandroid backup. Then booted into the Android revolution rom again. Looked at the nandroid backup if it was there. Then rebooted into recovery again, did a wipe and wiped cache partition. Then i flashed the Maximus rom and followed all the steps via Aroma. I went away and let the installer finish. When i got back i saw the CWM Screen but no sign that the installation finished. I clicked on reboot system anyways and thats when everything started going wrong. I'm stuck on the htc logo. I can go into bootloader, but when i click on recovery it restarts, shows the CWM logo very briefly and then powers down and starts getting stuck on the htc logo again.
I've searched on xda and google but found only tutorials about adb and stuff. But when i try it, it doesnt find the device. In the tut it asks to enable 'usb debugging', but i don't know if its enabled, cause i cant boot the rom.
Can anybody please help me?
PS. Fastboot works, but i cant find a command to boot into recovery.
MoDriouch said:
Hello guys, i'm searching for a solution to my problem (for several hours now) but i cant find anything useful. My chrome browser is full of tabs now
What the problem is, i had Android revolution rom installed on my HTC One. I wanted to try the Maximus rom so i downloaded it straight on my HTC. I rebooted into recovery and made a nandroid backup. Then booted into the Android revolution rom again. Looked at the nandroid backup if it was there. Then rebooted into recovery again, did a wipe and wiped cache partition. Then i flashed the Maximus rom and followed all the steps via Aroma. I went away and let the installer finish. When i got back i saw the CWM Screen but no sign that the installation finished. I clicked on reboot system anyways and thats when everything started going wrong. I'm stuck on the htc logo. I can go into bootloader, but when i click on recovery it restarts, shows the CWM logo very briefly and then powers down and starts getting stuck on the htc logo again.
I've searched on xda and google but found only tutorials about adb and stuff. But when i try it, it doesnt find the device. In the tut it asks to enable 'usb debugging', but i don't know if its enabled, cause i cant boot the rom.
Can anybody please help me?
PS. Fastboot works, but i cant find a command to boot into recovery.
Click to expand...
Click to collapse
Do u have adb drivers installed and u need the adb drivers for ur device and install ya device first before using adb copy the extracted folder to the c drive of ur pc and hit me bk
Sent from my HTC Butterfly using xda premium
daorderdillon said:
Do u have adb drivers installed and u need the adb drivers for ur device and install ya device first before using adb copy the extracted folder to the c drive of ur pc and hit me bk
Sent from my HTC Butterfly using xda premium
Click to expand...
Click to collapse
Well i have never used adb before, so i wouldn't know for sure. When i check how to install drivers, they all say that usb debugging must be turned on. How can i check if its installed?
MoDriouch said:
Well i have never used adb before, so i wouldn't know for sure. When i check how to install drivers, they all say that usb debugging must be turned on. How can i check if its installed?
Click to expand...
Click to collapse
http://db.tt/axLrZ50k-drivers
http://db.tt/ooWofisT-adb folder
Extract drivers then plug your phone to the pc to install it when u r done extract adb folder to c drive it will name android-tools jus rename it to adb
Sent from my HTC Butterfly using xda premium
---------- Post added at 12:47 AM ---------- Previous post was at 12:43 AM ----------
Also in order for it to be install the phone has to be plugged in and fastboot selected for u to get prompted for installation of adb I think u need to add me on gtalk [email protected]
This is windows 8 drivers http://db.tt/v0NPduDH
Sent from my HTC Butterfly using xda premium
ive stumpled on upon a quite annoying problem..i have an HTC ONE X+ which i unlocked my bootloader on and everything went smooth until i wanted to start recovery via hboot.
it did not start and i tried several times and restarted etcetc, i then tried to flash in another recovery and then tried more and more but nothing..
then i cant remember now exaclty how i did it, but i have several RUU, kernel, recovery, boot and roms n such items downloaded
so i tried to feed in another flash or rom or whatever its called to get the recovery funtion to work (i am not very pro at this) and then when i wanted to start my phone normally it all of a sudden wont boot properly.
it freezes on the bootscreen.. i can turn off and go in to bootloader but i cant do ANYTHING from there, i cant do a factory reset (wich i also tried when the recovery did not want to work) i cant do **** there. tried to lock and unlock bootloader.. feels like im out of options..
the only thing i can do now is command the phone via cmd and the toolkit i use from here "Hasoon2000s htc one x AIO kit"
using this guide on this thread mostly..
ive tried so many things now, searched this and other forums since friday and i still can not get anywhere... starting to think this is what the definition of a bricked unit is??
if you need any more info please just ask.. i bought the phone a week ago so kinda sucks if it would be useless for me right away haha..
i would appreciate som help and tips... please
Sincerely Jeff
VivaSativa said:
ive stumpled on upon a quite annoying problem..i have an HTC ONE X+ which i unlocked my bootloader on and everything went smooth until i wanted to start recovery via hboot.
it did not start and i tried several times and restarted etcetc, i then tried to flash in another recovery and then tried more and more but nothing..
then i cant remember now exaclty how i did it, but i have several RUU, kernel, recovery, boot and roms n such items downloaded
so i tried to feed in another flash or rom or whatever its called to get the recovery funtion to work (i am not very pro at this) and then when i wanted to start my phone normally it all of a sudden wont boot properly.
it freezes on the bootscreen.. i can turn off and go in to bootloader but i cant do ANYTHING from there, i cant do a factory reset (wich i also tried when the recovery did not want to work) i cant do **** there. tried to lock and unlock bootloader.. feels like im out of options..
the only thing i can do now is command the phone via cmd and the toolkit i use from here "Hasoon2000s htc one x AIO kit"
using this guide on this thread mostly..
ive tried so many things now, searched this and other forums since friday and i still can not get anywhere... starting to think this is what the definition of a bricked unit is??
if you need any more info please just ask.. i bought the phone a week ago so kinda sucks if it would be useless for me right away haha..
i would appreciate som help and tips... please
Sincerely Jeff
Click to expand...
Click to collapse
Flash twrp then go to recovery and flash a rom and extract the boot image from the zip file of the Rom and flash it via fastboot
Sent from my HTC Butterfly using xda premium
daorderdillon said:
Flash twrp then go to recovery and flash a rom and extract the boot image from the zip file of the Rom and flash it via fastboot
Sent from my HTC Butterfly using xda premium
Click to expand...
Click to collapse
made things easier, i sent it back and got a new one.. made it right this time
VivaSativa said:
made things easier, i sent it back and got a new one.. made it right this time
Click to expand...
Click to collapse
Ok
Sent from my HTC Butterfly using xda premium
daorderdillon said:
Ok
Sent from my HTC Butterfly using xda premium
Click to expand...
Click to collapse
Need some help daorderdillon...I have an HTC One M8
I wanted to flash to the UNROOTED Google Play Edition...so I rooted, TWRP'ed and did the S-OFF
and then tried to flash the ROM while in RUU mode...it gave me back a "41 error"...
so I tried to change the ModelID in the android.txt file...flashed, and then my HTC One M8 kept going into the HTC logo screen with 4 triangle error screen
When I do fastboot oem reboot, it gets me back into the device - but any normal restart after, and I'm back in the HTC logo error screen
I can't go into recovery mode either - using the POWER and UP / DOWN buttons or through the software...
Stuck, and I really don't know what to do
Thanks in advance!
wikwikwik said:
Need some help daorderdillon...I have an HTC One M8
Thanks in advance!
Click to expand...
Click to collapse
you're posting in the M7 forum, you should post in the M8 forum instead: http://forum.xda-developers.com/htc-one-m8
Hi everyone
After a lot of reading i decided to install a ROM. Now i was able to try to but none of them worked, so i ve been trying now for 3 days. I think i did it all as stated in this forums, it launched but never go to really open the OS, used to get stuck at the motorola or nexus logos or what ever logo from the different ROMs i downloaded.
I was able to go back to the original ROM but today im not being able to do so...
What can i do? Im at recovery and im able to restore boot but at system it says:Error while restoring /system!
I had it backedup at pc so i have also removed the one at sd card and tried with the one from PC.
What can i do (that doesnt involve getting another phone)
You can try RSDLite to flash back stock ROM just be careful and flash right ROM, otherwise you can brick your phone. You can't flash custom ROMs with RSD.
mm166 said:
You can try RSDLite to flash back stock ROM just be careful and flash right ROM, otherwise you can brick your phone. You can't flash custom ROMs with RSD.
Click to expand...
Click to collapse
Attempting in 3..2..1..................
It doesnt let me use decompress and flash... im decompressing and will see if there is an option to flash after that...
Ok my issue is that phone is not recognized by the RSD... i know update the drivers bla blaaa... how if its not recognized and the MDM needs the phone connected to be updated and in my country i know noone else with a damn Motorola phone... ideas ?
MrPersonality said:
Ok my issue is that phone is not recognized by the RSD... i know update the drivers bla blaaa... how if its not recognized and the MDM needs the phone connected to be updated and in my country i know noone else with a damn Motorola phone... ideas ?
Click to expand...
Click to collapse
Boot the phone into bootloader/fastboot?
You have an unlocked bootloader and custom recovery installed? I assume you have both since you were trying to install custom ROMs.
I have tried to the fastboot... im trying AP fastboot and theres where i am stuck right now.
Yes custome recovery and unlocked bootloader there. I had the phone moved to another couple of roms but the never loaded correctly so i went back to my original ROM, i tried a few other ROMs and none worked so this time i try to go back but it doesnt come back anymore... :laugh:
Try downloading PhilzAdvanced CWM Recovery. It is based off the latest CWM and should be able to flash your backups or ROMS. Maybe not your backups unless you made them with a CWM based recovery, but it should get you booted up.
kingatmos said:
Try downloading PhilzAdvanced CWM Recovery. It is based off the latest CWM and should be able to flash your backups or ROMS. Maybe not your backups unless you made them with a CWM based recovery, but it should get you booted up.
Click to expand...
Click to collapse
Is it possible to do that? I mean right now my phone only boots to fastboot you know... i may flash a rom (which didnt work with any from this forum neither with CM) but i cant install anything in my phone so... how can i do that?
MrPersonality said:
Is it possible to do that? I mean right now my phone only boots to fastboot you know... i may flash a rom (which didnt work with any from this forum neither with CM) but i cant install anything in my phone so... how can i do that?
Click to expand...
Click to collapse
1. Read the Myth Tools OP
2. Download Myth Tools
3. Download Philz CWM
4. Download a stock fastboot
5. Place the fastboot zip and the extracted recovery/cwm.img in their respected folders
6. Run Myth's executable and follow the instructions
7. If that doesn't work then read the faqs here and in the RAZR HD forums, all your questions have been answered already.
Still with same issue...
Phone is not recognized by the computer (tried 3 different laptops)
Cannot download the Drivers as its an automated process that begins when you connect the phone...
Does anyone knows an alternative to install AHD drivers ?
MrPersonality said:
Still with same issue...
Phone is not recognized by the computer (tried 3 different laptops)
Cannot download the Drivers as its an automated process that begins when you connect the phone...
Does anyone knows an alternative to install AHD drivers ?
Click to expand...
Click to collapse
Did you not see the mythtools menu option for drivers?
Sent from my MB886 using xda app-developers app
palmbeach05 said:
Did you not see the mythtools menu option for drivers?
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Again, my main issue device not detected by pc... so i cant download drivers using automatic tools that detects the phone because again phone is not detected and mythtools goes straight to the motorola device manager which needs a phone connected to act... so in a very bad circle i am... and i would try to use someone else phone but here in Costa Rica i know of noone else with a Motorola phone... everyone thinks it no longer exists... and i havent found a way to download the specific drivers for my specific device in a way it doesnt require to be connected.
You can boot into recovery? If so download the latest philztouch cwm recovery, put it on your sd card, and flash it from recovery. Then flash the ROM you want.
Sent from my MB886 using Tapatalk
kingatmos said:
You can boot into recovery? If so download the latest philztouch cwm recovery, put it on your sd card, and flash it from recovery. Then flash the ROM you want.
Sent from my MB886 using Tapatalk
Click to expand...
Click to collapse
Nice i managed to flash the philztouch recovery... the damn phone doesn't want to accept any ROM... keeps aborting them. So far thanks a lot... ill read like crazy today again and ill ask for help if failure salutes me again!
:highfive:
If you made a backup of your stock after rooting try flashing that and then hooking your phone up to your pc
Sent from my MB886 using Tapatalk
It finally works
It works... i think somehow the recovery stopped working at some point... now with Philz phone was recognized by pc and i was able to use Myth tools to do the job. I think this will be my last Motorola...
Things to highlight:
1 i did read a lot before doing anything, still somehow screwed up, did read lots before asking here, still needed to ask... got answers, still needed to ask more... it was fun as everyone at work said: " its bricked fool buy a new one and stop playing to be good at something" but hell yeah its fixed!
2 i will try again to install another rom, i wont give up damn it!
3 i might begin with my wife Note 1, its old so its ok to brick it ha ha ha
4 damn it guys you are cool... wish i were 10% of you guys!
5 I think instead of all those different options out there we should recommend only to use the myth tools, its a complete package and its easy to use even with examples for newbies like me.
Again thanks and questions on friday after i brick it again e he he he...
The other stuff is there so you can understand what the automated stuff is actually doing.
Sent from my MB886 using Tapatalk
Ok so i have started the process again. I cant tell what i am doing wrong. I have flashed 2 different roms and none worked... its like im missing something.
I root the device, unlock bootloader... set the recovery with cwm... flash the rom... and it goes to moto logo and then black screen... am i missing something?
I did the exact same for the stock rom and it did work... also i did it all exactly the same using now myth tools... so any ideas? Should i leave the phone alone because its just simply not going to work or am i missing anything?