Database Develop

[ROM] *** XipherBUILD JI6 Rom Based on Frankin-Twiz ***

This ROM has been modified to Include The Data File for The Sims 3. Instructions are included with the download link.
XipherBUILD Rom
Flashing this rom will wipe your data (Not you internal SD Card) please make a backup of all your applications​
This ROM is based on eugene373's Frankin-Twiz Rom and has the default theme, indicators and wallpaper. The changes have been to the boot sequence and the underlying system. I have also included many of the default Samsung Applications that were removed from Frankin-Twiz. A full list of changes follows.
XipherBUILD v.1.1:
~Added the TouchWiz Calendar
~Added AllShare fixed to be compatible with Frankin-Twiz
~Fully Deodexed OTA Release and ported application updates
~Corrected default permissions of /data/app applications on install
XipherBUILD v1.0:
~Included Root
~Included the I9000 Boot Splash
~Included a modified I9000 Shutdown sequence
~Included the JI6 OTA modem.bin for 3G & Reception Improvements
~Included LSB Fix for GPS to use MS Based Network Assistance from Google's Servers
~Included the Captivate Camera Application
~Included JAC's OC Kernel + Color Correction
~Installed the following Samsung Applications:
AmazonMP3
Audio Postcard
Samsung Calculator
Samsung MyFiles
Samsung MediaHub
Samsung Music Player
The Sims 3 Launcher (You will need to install the Sim3 Data Package As Well)
SlackerRadio
~Replaced Layar-samsung with the True Layar application from the market
~Included the ROM Manager (Free Version) and RyanZA's OCLF (Free Version)
~Other stuff I forgot about.....
This can be lag fixed with either the Voodoo Lagfix OR RyanZA's One Click Lag Fix!
************************************************************************************
UPDATED VERSION RELEASED 10/11/10 Download the XipherBUILD.v.1.1 (Sims 3 Included).zip from MultiUpload HERE
ORIGINAL VERSION RELEASED ON 10/10/10 Download the XipherBUILD.v.1.0 (Sims 3 Included).zip from MultiUpload HERE
Once the install has completed make sure to open ROM Manager and run Fix Permissions to correct any permission issues.
************************************************************************************​
Installation​
1. Download the ROM Manager from the market as well as the RyanAZ's OCLF 2.0.
2. Open OCLF from the menu and install root. (Follow the instructions that the application gives you to enable root access)
3. Copy the file XipherBUILD.v.1.0.zip to your internal sd card.
4. Open the ROM Manager and click "Flash ClockworkMod Recovery" and select the Samsung Vibrant. When prompted allow root access.
5. Reboot into Recovery. The default Android recovery screen will appear, use the Volume Keys to move down to "reinstall packages" and kit the power key to select it. The phone will reboot into the ClockworkMod Recovery.
6. Using the vol- key move down and select "install zip from sdcard"
7. Using the vol- key move down and select "choose zip from sdcard"
8. Using the vol- key move down and select "XipherBUILD.v.1.0.zip"
9. Using the vol- key move down and select "Yes - Install xxxx"
The install will commence. Once done use the vol- key to select go back and then select "Reboot system Now"
Once the install has completed make sure to open ROM Manager and run Fix Permissions to correct any permission issues.
Over clocking the CPU​
Make sure to install SetCPU and adjust your CPU to 200mhz - 1200mhz to enable the over clocking of the processor. You can get SetCPU from the market or elsewhere on these forums.
Lag Fix Guides:
There are step by step instructions to apply either RyanZA's One Click Lag Fix, or the Voodoo Lag Fix​
Only One Lag Fix Can Be Enabled At A Time​
RyanZA's One Click Lag Fix
1. Open the application menu and select OCLF
2. Allow the application to have Root Access by selecting Allow
3. Install the EXT2 Tools
4. Apply the v.2.1+ Lag Fix and select a size of approx 1300mb
5. Wait until phone powers down and reboots.
Voodoo Lag Fix
1. Download the Voodoo lag fix from here project-voodoo.org Make sure that you download the Galaxy S Vibrant T-Mobile (SGH-T959) update .zip
2. Copy the "Voodoo-lagfix-3.0-SGH-T959-update.zip" file to your internal SD Card
3. Open the ROM Manager from the application menu and allow it root access.
4. Install ClockWork Recovery (Select Galaxy S Vibrant) and then Reboot into Recovery.
5. The default recovery menu will open, select "reinstall packages"
6. After the phone boots into clockwork recovery select "install zip from sdcard" then "choose zip from sdcard" and use the volume keys to move down to "Voodoo-lagfix-3.0-SGH-T959-update.zip" and hit the power key. Next confirm the install by moving to Yes and install. Once this is completed go back until you can reboot the phone. As the phone reboots the lag fix will be applied.
CREDITS:
eugene373 for the Frankin-Twiz Base
justanothercrowd for the exceptional kernel
RyanAZ for the easy Root Option
lbingham for the Mobile AP Mod
chaoscentral for the I9000 Camera Mod
rk0 for the I9000 Boot animation
Tydiz for the I9000 shutdown animations
And Anyone Else I May Have Missed!​

Thanks for the work! Will have a try!
Another question:
Can the two lag-fix use together?

dddtc2005 said:
Thanks for the work! Will have a try!
Another question:
Can the two lag-fix use together?
Click to expand...
Click to collapse
You welcome! No, it is either one or the other. Many people swear by the Voodoo lag fix, but if you forget to disable it you will end up having to go through a lot to reverse it. (Personal Experience )

xipher_zero said:
You welcome! No, it is either one or the other. Many people swear by the Voodoo lag fix, but if you forget to disable it you will end up having to go through a lot to reverse it. (Personal Experience )
Click to expand...
Click to collapse
OK,got it. Thanks
I use Bionix's rom with voodoo kernel(thanks for his great work), but when i enabled voodoo it says '/dev/block/mmcblk0p3' in adb shell instead of '/dev/block/mmcblk0p4' in his thread. I don't know why but it will be all right to flash another Rom. I also searched on google, but thers's no help about it.
Hope this can help someone who were in this situation..
PS: When disabled ,it says '/dev/block/mmcblk0p2' corretly.

It should always say "0p3", you were looking in the wrong spot. It confused me at first too.

Thanks for the Great Work!!!!!!

The K-Zoo Kid said:
It should always say "0p3", you were looking in the wrong spot. It confused me at first too.
Click to expand...
Click to collapse
Thanks! It really confused me for a long time...LOL

Parse Error on Sims3
Any reason this is showing up? Other than that, great ROM!!!!

Nice work, lets keep the development for the Vibrant rolling. The more the better!
Sent from my SGH-T959 using XDA App

Wow no one is reporting Bugs

The K-Zoo Kid said:
It should always say "0p3", you were looking in the wrong spot. It confused me at first too.
Click to expand...
Click to collapse
Thanks for clearing that up, I had already gone to sleep when dddtc2005 asked.

jreed3786 said:
Any reason this is showing up? Other than that, great ROM!!!!
Click to expand...
Click to collapse
I didn't have enough room in the ROM Zip to include the data package and still be able to use MediaFire's free 200mb account. I have updated the OP with the instructions on how to get and install the data package.
If anyone knows of a different file sharing site that is as easy for people to download from please let me know and I will upload the ROM with the data package included. (232mb).

I know this isn't a BIG deal. But you added the thing for the Sims 3. When i click on it to download it. I get this message. *There is a problem parsing the package.* Uhh, Is it my fault and didn't do something or what??

I use dropbox to host files... 2gb limit and they seem to download more successfully
Sent from my SGH-T959 using XDA App

chris279m said:
I know this isn't a BIG deal. But you added the thing for the Sims 3. When i click on it to download it. I get this message. *There is a problem parsing the package.* Uhh, Is it my fault and didn't do something or what??
Click to expand...
Click to collapse
I have updated the OP to include instructions for getting the Sims to work. Basically the issue arises from the Sims 3 Stub file being locked to my handset. When it is installed on anyone else's handset it will error out due to the device ID mismatch. The way around this is to install the data package yourself. All of the instructions to do so are in the OP now.

junkdruggler said:
I use dropbox to host files... 2gb limit and they seem to download more successfully
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I have never used DB before. Can I set it up so that anyone can download the file, or do they have to log into my DB account to access it?

You just upload and it allows you to share a link... its really easy and links your phone to your comp...
Sent from my SGH-T959 using XDA App

This looks awesome! It's great seeing all of these custom ROMs coming out now, thank you!

first time i ever flashed a rom to my vibrant...well worth it!! GOOd ROM!!! fast

rolf90 said:
first time i ever flashed a rom to my vibrant...well worth it!! GOOd ROM!!! fast
Click to expand...
Click to collapse
Thank you! I glad you like it. Any feedback is appreciated!

[NAND][NANDROID] ATTISOID first release [29.2.2012]

Hi Guys! I finally can release my first customized themed ROM from SP3DV build! This is my daily use ROM and think it is so good to share it.
I'd prefer to shared the NANDROID (backup restore) but maybe upload the usual installing .zip file in next days. The major advantages of this rom is that it can boot with SD CARD inserted (It work for me and hope to work with any SD CARD type). Also use an app (tasker) that prevents rebooting after any missed call.
FEATURES:
- Based on CyanogenMod 7.1 Android 2.3.7
- This is a MOTO BLUR themed rom. (I don't use the BLURHOME launcher becouse it is so heavy for X1. Instead I use a blur theme for Great GO LAUNCHER EX)
- Changed Bootanimation with a 3D CYANOGENMOD7.
- JAVA enabled (For installing .jar files).
- New WALLPAPERS.
- 3 new AOSP themes Added (MOTOBLUR, ANASTASDROID, ROVER BLACK).
- Customized framework-res.apk.
- US text-to-speech (tts) Added.
- Changed the default FONT with the CHINT font.
- used the last Zargloub's kernel (gf111062 - 28.2.2012).
- CPU Max and Min frequency customized (128~614MHZ).
ADDED:
- Go launcher ex with BLUR theme, Go locker, Go locker themes, Go taskmanager, Go weather.
- Gauge battery widget.
- X-plore.
- Smart keyboard pro.
- Multitasking pro (With long press of home key it appears).
- Ucbrowser and Ucxunlei (a great chinese downloading app).
- Audio effect.
- TASKER (A good replacement of chinese Newding) [Great Thanks to BORKISHA and other guys that introduce it].
REMOVED:
- Stoke Android Keyboard.
- Old CMWALLPAPERS.
- CM7 old themes.
- Newding
BUGS:
THIS ROM IS UNROOT! So there are some bugs like wifi problems!
IF YOU DONT HAVE THE CLOCKWORKMOD recovery flashed to your XPERIA X1, please see the link blow till flashing CLOCKWORKMOD recovery. [thanks to Kerfooly]
http://forum.xda-developers.com/showthread.php?t=1329379
HOW TO INSTALL:
1- Download the .7z file from the provided link.
2- Extract it and put the folder clockworkmod in the root of your SD CARD.
3- Reboot in recovery and choose backup and restore.
4- select restore.
5- select the date-time provided. then select yes-restore.
6- reboot and enjoy without need to eject your SD CARD when booting!
7- After that ANDROID boots, launch the TASKER app and select your ringtone and SMS notification from your SD CARD!
Special Thanks to:
- SP3DEV
- Sun Dream
- Kerfooly
- Zargloub
- jerrytan93
Download link:
*** Link removed due to unlicensed paid software included in this release ***
-DM

IMPORTANT NOTE:
There are not something special in that build! just can find a way to prevent SD CARD checking while boot! I find that if the build be unroot it can't stuck while boot! I try 4zroot for unroot but it can't reroot! When the build be unroot some bugs appear! If the unroot-reroot problem solves, can say that the SD CARD problem finally can be solved!

first one unbelivable it really works with sdcard inserted nice job attisa!!!!
my simcard can't get detected with this rom

wow...really this build can used daily ??

Thanks for your rom
Do you have Install zip for it
because I need to add my files specially my ringtones
thanks again

mahmoodifar said:
Thanks for your rom
Do you have Install zip for it
because I need to add my files specially my ringtones
thanks again
Click to expand...
Click to collapse
I'd post the installer .zip file in some next days! But for now you can modify the TASKER app to use your ringtone! because this app use the SD CARD ringtones to prevent reboot when phone rings!

Elibl said:
first one unbelivable it really works with sdcard inserted nice job attiso!!!!
my simcard can't get detected with this rom
Click to expand...
Click to collapse
I have no idea why your simcard can't detected. Did you try reboot or replacing the simcard?! I think you do it! Hope that the .zip file don't have this problem!

Hi, thanks for this. I've just installed it. Whats wrong with wifi? its showing an "error" message and its not finding any network. Also, are GAPPS included ?

Could you tell us what did you do to fix SDcard problem to fix another roms because I really like IceDroid
Thanks

mahmoodifar said:
Could you tell us what did you do to fix SDcard problem to fix another roms because I really like IceDroid
Thanks
Click to expand...
Click to collapse
The simplest way is that use 4zroot.apk for unroot-reroot the device!

attisa said:
The simplest way is that use 4zroot.apk for unroot-reroot the device!
Click to expand...
Click to collapse
thanks a lot! and what's the reason for the boot problem? do you know it?

attisa said:
The simplest way is that use 4zroot.apk for unroot-reroot the device!
Click to expand...
Click to collapse
So, just load it up, click unroot then reboot, then run again and chose reroot?

for me it gives force closes and system is totally messed after unroot and i'm not able to reroot...
but boot works with sdcard inserted...

Just like me
Wifi doesn't work anymore

what kind of crap you posted attisa didn't you tried it before?
but solution is near...
wifi is also messed up for me...
EDIT: oh ok i understand this is the mod you did to the rom but i prefer to remove sdcard than to have no su rights and no wifi
but pretty good the solution is near
you only should mentioned the problems more clearly and earlier...

I think all of these problems are as result of shell rooting
If there is a way to could full root the NAND roms, all problems will gone (missed call reboot, SDcard, wifi, ...)

If it ok I share tasker and it's settings
What are the Phone Offhook and Phone Idle ?

Sorry OP, but i have to close this. Next time, do not include paid software in your release..

Fully install V6 Supercharger on ICS

I have been looking through the recent ICS threads and people have had alot of out of memory problems, so I thought I would post this easy to understand tutorial (well I hope it will be easy to understand)
Before starting, on Miroslav's Project Icecream Swift, you need to download busybox installer and install version 1.18.2, busybox included will not correctly determine minfrees.
First download the latest version of V6 at the end of this post, then copy it to your SD card and run it with Script Manager (from the market).
Choose your prefered scrolling speed and in the latest version its pretty much automated, you just have to say yes no a few times but it will auto detect the best settings based on the RAM of the device.
Also do not superclean and reboot, we need to do something else before we reboot.
Ensure you have a file explorer that can view the /system partiton before continuing.
On your phone browse to http://android.mimic.ca
Then click browse and choose your file explorer, and find services.jar in /system/framework then upload it.
After this the site will modify the services.jar and offer a download for it, to make it easy lets just use the update.zip so select that and download it.
Using the stock browser atleast it will go to /sdcard/download.
After this reboot to recovery, scroll to mounts and storage and mount /system manually (when I did not do this it didn't write the modified file) then install the zip.
Wipe dalvik cache and reboot, first boot will take a long time while its upgrading applications then run the V6 supercharger script to confirm you are 100% supercharged and you have your hard to kill or die hard launcher.
Note: On AOKP (atleast this version) because it doesn't have init.d (think its that one) before you first reboot to install services.jar you will need to browse in script manager to /data and find the 99SuperCharger.sh file and make it run on boot to get 100% supercharged.
I don't know if its important but every new rom I use I repatch services.jar just to be safe.
Any questions post here (also if the file doesn't download let me know and I'll upload it and post the link.)
Recovery zips for AOKP and Icecream Swift services.jar can be found below, just mount /system manually and i"nstall zip from sdcard" sorry it took a bit

For me i just use swap works good enough

For me not. Even if i use swap when i try to use gplay and listen music, music app closes itself. (Miro's latest ron)
Sent from my GT540 using xda premium

coto39 said:
For me not. Even if i use swap when i try to use gplay and listen music, music app closes itself. (Miro's latest ron)
Sent from my GT540 using xda premium
Click to expand...
Click to collapse
Thats because swap is not technically used as RAM, what it does is suspends background apps using up RAM, then puts that state in to swap, the apps cannot run from the swap partition, so if you are listening to music and using the browser you will notice this, if you have twitter open, then open a link from a twitter post, the state of twitter gets pushed to the swap partition, to allow the browser to open and run, you then close the browser and it pulls twitter from the swap partition back to RAM giving the illusion of multitasking.
V6 actually gives multitasking by making sure android does not close apps when you have a fair amount of RAM left.

delsus said:
Thats because swap is not technically used as RAM, what it does is suspends background apps using up RAM, then puts that state in to swap, the apps cannot run from the swap partition, so if you are listening to music and using the browser you will notice this, if you have twitter open, then open a link from a twitter post, the state of twitter gets pushed to the swap partition, to allow the browser to open and run, you then close the browser and it pulls twitter from the swap partition back to RAM giving the illusion of multitasking.
V6 actually gives multitasking by making sure android does not close apps when you have a fair amount of RAM left.
Click to expand...
Click to collapse
Thanks for the explanation. I tried to apply supercharger (latest version, Update9RC8.2) to IceCreamSwift second official release bug when it try to apply minfrees the phone reboots.... The version you left works but don't shoy current minfrees, just shows: , , , , ,

coto39 said:
Thanks for the explanation. I tried to apply supercharger (latest version, Update9RC8.2) to IceCreamSwift second official release bug when it try to apply minfrees the phone reboots.... The version you left works but don't shoy current minfrees, just shows: , , , , ,
Click to expand...
Click to collapse
Hmm thats wierd, I have always been able to see them, but if it works it works

delsus said:
Hmm thats wierd, I have always been able to see them, but if it works it works
Click to expand...
Click to collapse
Don't know why but everytime i try to use the script with latest miroslav ICS i got an exception when try to appy supercalculator minfrees then a reboot.
With latest version of the script i can see original minfrees= "1,1,1,1,1,1,1" and when i try to apply new one = Poof! reboot!
Did you installed another busybox or something?... This rom without the script sucks in multitasking matter. (open one app and the others will be closed, is monotasking )

coto39 said:
Don't know why but everytime i try to use the script with latest miroslav ICS i got an exception when try to appy supercalculator minfrees then a reboot.
With latest version of the script i can see original minfrees= "1,1,1,1,1,1,1" and when i try to apply new one = Poof! reboot!
Did you installed another busybox or something?... This rom without the script sucks in multitasking matter. (open one app and the others will be closed, is monotasking )
Click to expand...
Click to collapse
I'll check it on new version of miro's rom tonight when I charge my phone (battery is dead right now) but I normally use the default busybox, it could be that the default has been changed on this rom, download busybox installer from the market and try a version on there, they are all complete so should have no problems on that end, lemme know if it still doesn't work.

delsus said:
I'll check it on new version of miro's rom tonight when I charge my phone (battery is dead right now) but I normally use the default busybox, it could be that the default has been changed on this rom, download busybox installer from the market and try a version on there, they are all complete so should have no problems on that end, lemme know if it still doesn't work.
Click to expand...
Click to collapse
My issue was cause by the minfrees calculated by supercalculator (option 10). Using option 2 is ok but, still have 9-5mb free and if i open 2 apps -> one of them close itself (and like you said, swap does't help with that)... so i have to go back to sdsl 2.0 :/

coto39 said:
My issue was cause by the minfrees calculated by supercalculator (option 10). Using option 2 is ok but, still have 9-5mb free and if i open 2 apps -> one of them close itself (and like you said, swap does't help with that)... so i have to go back to sdsl 2.0 :/
Click to expand...
Click to collapse
Hmm, I'll try myself soon, havent noticed the problem before, I'll report back

coto39 said:
My issue was cause by the minfrees calculated by supercalculator (option 10). Using option 2 is ok but, still have 9-5mb free and if i open 2 apps -> one of them close itself (and like you said, swap does't help with that)... so i have to go back to sdsl 2.0 :/
Click to expand...
Click to collapse
Ok I just resupercharged my phone running miroslav's rom, and I did see your problems, I fixed it downloading busybox installer and using busybox version 1.18.2 and it will detect your minfrees.
Also updated OP with this info and the patched services.jar files.

delsus said:
Ok I just resupercharged my phone running miroslav's rom, and I did see your problems, I fixed it downloading busybox installer and using busybox version 1.18.2 and it will detect your minfrees.
Also updated OP with this info and the patched services.jar files.
Click to expand...
Click to collapse
I did this, but when i run the script for second time to confirm if it worked, it says:
Launcher is DIE-HARD! ie. SUPERCHARGED
but after says:
OOM Grouping Fixes ARE NOT in Effect
...
Current values DON'T MATCH Prior SuperCharge!
this means that didn't worked???
I use miroslav last update 20/05/12

arperalta3 said:
I did this, but when i run the script for second time to confirm if it worked, it says:
Launcher is DIE-HARD! ie. SUPERCHARGED
but after says:
OOM Grouping Fixes ARE NOT in Effect
...
Current values DON'T MATCH Prior SuperCharge!
this means that didn't worked???
I use miroslav last update 20/05/12
Click to expand...
Click to collapse
Did you use busy box installer to install busy box or are you just using the version pre installed? The CM9 one will not work with V6.
Sent from my LG-GT540 using XDA

delsus said:
Did you use busy box installer to install busy box or are you just using the version pre installed? The CM9 one will not work with V6.
Sent from my LG-GT540 using XDA
Click to expand...
Click to collapse
I used busybox installer to get the version 1.18.2

arperalta3 said:
I used busybox installer to get the version 1.18.2
Click to expand...
Click to collapse
Using root explorer check /system/etc/init.d and see if there is a supercharger script in there.
If not try supercharging again, reboot and check, if its still not working find the 99supercharger.sh script and select "run on boot" and reboot, it should work after this.

delsus said:
Using root explorer check /system/etc/init.d and see if there is a supercharger script in there.
If not try supercharging again, reboot and check, if its still not working find the 99supercharger.sh script and select "run on boot" and reboot, it should work after this.
Click to expand...
Click to collapse
thanks, the script is in /system/etc/init.d, i will try to run the script with the option "run on boot" in script manager later

arperalta3 said:
thanks, the script is in /system/etc/init.d, i will try to run the script with the option "run on boot" in script manager later
Click to expand...
Click to collapse
Before you select "run on boot" just try to supercharge again, something could have messed up a little when you applied the minfrees, init.d scripts should run on boot anyway.

delsus said:
Before you select "run on boot" just try to supercharge again, something could have messed up a little when you applied the minfrees, init.d scripts should run on boot anyway.
Click to expand...
Click to collapse
weird weht i run the script in the end it says that everything is ok and active, but when i reboot and clean davilk chache and run again, it says that isnt ok

I have applied V6 Supercharge on this IceCreamSwift ROM. If I do Wipe Data/Factory Reset, do I need to apply V6 again?

Yes

Add native android SIP stack for Wifi & 3G calls in ICS - Galaxy Note-GT-N7000

This is just to help people like me that use their mobile for internet calls. As you know, it is disabled in GNote ICS and the old method here http://forum.xda-developers.com/showthread.php?t=1109962 does not work for ICS ROMs.
TESTED ON
LPY
LPF
LP8
LP9
LQ2
LQ3
Kingdroid 2.0
Kingdroid 2.1
Kingdroid 3.0
GNote i717 Team Perfection ICS (UCLE2)
Criskelo V7
MIGHT WORK FOR YOUR ROM IS THE SIZE OF YOUR framework-res.apk IS: Size: 18.7 MB (19,623,222 bytes), Size on disk: 18.7 MB (19,623,936 bytes)---checked under windows.
I will attach a modified framework-res.apk for GNote ICS ROM and the Internet call settings menu file.
Just a little changelog of what the modified framework-res.apk can do
Enables internet call (Wifi & 3G)
Enables all orientations (your phone rotates all round)
Rotating Lockscreen (Landscape + Portrait)
Screen stays off on USB/Charger disconnect
Just download one of the .zip files below extract and copy android.software.sip.voip.xml (its in this folder \system\etc\permissions) file to /etc/permissions using ES file explorer, Root explorer or any root browsing app. You can also push this file via ADB but you must be rooted in order to do any of these. After copy framework-res.apk (its in this folder \system\framework) to /system/framework, you can also push this. Your phone will freeze and quickly reboot, if not reboot manually but give it enough time to copy the files.
You should have internet calling now and all the other extras.
NOTE: Always backup incase something goes wrong, I am not to be held responsible for any bricks.
However, if anything goes wrong, just push back Stock framework-res.apk or if not reflash Non-wipe ICS ROM.
This framework-res.apk is specifically tested on the GNote ICS ROMs listed above, use it in any other ROM at your own risk.
--------------------------EASIER STEP FOR NON-ROOTED ROMS--------------------------
To simplify these steps, I have made a flashable zip. Download one of the .zip files and put it in your sdcard (external)---Do not extract pls.
Boot into recovery (Vol up + Power button + Home button all together)
-------ALREADY HAVE CWM DO THIS-------
Scroll down to 'Install zip from sdcard'
Then 'Select zip from Internal/External sd'
Find the zip where you saved it and select it
Select Yes to install.
NOTE: CWM uses Vol up & down to scroll and Home button to select
----------STOCK RECOVERY DO THIS---------
Download CWM Touch
Copy to External sdcard
Boot into recovery
Scroll down to 'Apply update from external sdcard'
Locate CWM and select it
Select Yes to install
CWM Touch will load automatically
Click 'Install zip from sdcard'
Click 'Select zip from Internal/External sd'
Locate the zip where you saved it scrolling with your finger or with volume button
Click on it and select yes to install.
NOTE: Stock recovery uses volume up & down to scroll and Power button to select while CWM Touch uses hand + Vol up & down for scrolling and Touch and Home button to select.
When all is done, go back and select Reboot system.
If you have any questions post it here.
THERE ARE FOUR DIFFERENT WAYS TO GET THIS DONE
1. Copy using root explorer
2. Push using ADB
3. Install using CWM Touch temporary
4. Install using CWM kernel installed on your phone.
FOR STEP
1. You must have root and root explorer app, just download the file, extract and copy each to their respective directories (refer to the step above).
2. Push the two files using ADB but you need root in order to do this.
3. Install temporary CWM Touch via stock recovery and flash the zip. This does not install CWM in your phone, it disappears as soon as you reboot.
4. Install CWM kernel for your ROM and use it to flash the zip.
DOWNLOADS
framework-res.apk----------> SIP + Orientation Mods for Copy or Push
SIP xml file---------> android.software.sip.voip.zip, for Copy or Push
Enable SIP + Other Mods----------> SIP + Orientation Mods for CWM
Enable SIP only with this----------> SIP Only for CWM
Stock framework-res.apk----------> Stock in case you want to revert back.
KingDroid-2.0---------> Enable SIP in KingDroid 2.0 ROM
KingDroid-2.0-REVERT ----------> Revert back in case of issues 2.0
KingDroid-2.1----------> Enable SIP + CRT effects in KingDroid 2.1 ROM
KingDroid-2.1-REVERT----------> Revert back in case of issues 2.1
Kingdroid-3.0----------> Enable SIP in KingDroid 3.0 ROM
GNote-i717-Team Perfection ICS (UCLE2)----------> Enable SIP in GNote-i717-Team Perfection ICS (UCLE2) ROM
Criskelo-V7----------> Enable SIP in Criskelo-V7 ROM
If this worked for you in another ROM just post it here so others will have confidence in flashing it.

Can you do the same for Indian ics version?
Edit: This framework works on ddlp8, it also changes swipe lock to default ics lock.
With this the device SOS going to deep sleep
Can someone on lpy check if device goes into deep sleep after setting voip?

jaskiratsingh said:
Can you do the same for Indian ics version?
Edit: This framework works on ddlp8, it also changes swipe lock to default ics lock.
With this the device SOS going to deep sleep
Can someone on lpy check if device goes into deep sleep after setting voip?
Click to expand...
Click to collapse
I ll need your framework-res.apk

mrcasmir said:
And others I have not noticed yet
Click to expand...
Click to collapse
What are the others changes?
I ask that because I don't like install something on my phones without have all the informations/changelog.

tdomikael said:
What are the others changes?
I ask that because I don't like install something on my phones without have all the informations/changelog.
Click to expand...
Click to collapse
Well there are other options I changed from false to true and vise versa and then changed it from Phone device to Tablet device. I noticed most changes in the dialogue boxes and graphical interface.
Well its your call, if you want it then go for it.

So, if I understand, after apply your modifications, my phone will most look like tablet device than phone device?
There is no performance or battery changement (no bad surprise with anormal drain battery ou low performance), but just appearance modification.
I'm right?
And an other question : Is there possibility to just add native SIP in ICS, without apply others modifications?
PS : apologise for my english

tdomikael said:
So, if I understand, after apply your modifications, my phone will most look like tablet device than phone device?
There is no performance or battery changement (no bad surprise with anormal drain battery ou low performance), but just appearance modification.
I'm right?
And an other question : Is there possibility to just add native SIP in ICS, without apply others modifications?
PS : apologise for my english
Click to expand...
Click to collapse
You sound so scared, well I will add SIP only version in a few minutes. Just check back in 10

mrcasmir said:
You sound so scared
Click to expand...
Click to collapse
scared? Not really, I just like understand what I do. I think it's the best thing to do for progress.
For example, after read your post, I know that is possible to change option. So I actually trying know how to change the false/true options. I don't know where find the files where they are, and after how to open, look and try to understand them.
I'm "noob", so I think it will take me a long time!
mrcasmir said:
well I will add SIP only version
Click to expand...
Click to collapse
Thanks a lot!!

mrcasmir said:
I ll need your framework-res.apk
Click to expand...
Click to collapse
DDLP8 framework is uploaded at the below location:
http://www.multiupload.nl/XY6SR86687

jaskiratsingh said:
DDLP8 framework is uploaded at the below location:
http://www.multiupload.nl/XY6SR86687
Click to expand...
Click to collapse
Have just compared the two files, there are thesame. Just go ahead and install this one they use thesame framework-res.apk

tdomikael said:
scared? Not really, I just like understand what I do. I think it's the best thing to do for progress.
For example, after read your post, I know that is possible to change option. So I actually trying know how to change the false/true options. I don't know where find the files where they are, and after how to open, look and try to understand them.
I'm "noob", so I think it will take me a long time!
Thanks a lot!!
Click to expand...
Click to collapse
Here is the SIP only version https://rapidshare.com/files/3975298779/SIP-only-ICS-LPY.zip
Just flash via recovery, follow the guide above

Thanks a lot!!
Edit : Working perfectly

Tested with poivy.com account, no problems!
I also figured to enable the "Ask for every call" option in order to use the sip voip with the dialer XD

mrcasmir said:
Enables internet call (Wifi & 3G)
Enables all orientations (your phone rotates all round)
Rotating Lockscreen (Landscape + Portrait)
Screen stays off on USB/Charger disconnect
Tablet like dialogue boxes
Click to expand...
Click to collapse
How did you enable 4 way Rotation ?

mrcasmir said:
Have just compared the two files, there are thesame. Just go ahead and install this one they use thesame framework-res.apk
Click to expand...
Click to collapse
Thanks. Will use it
Sent from my GT-N7000 using XDA

Thanks! :thumbup: it's ok on the Kingdroid 2.0 fantastic!
Inviato dal mio GT-N7000 con Tapatalk 2

Can we configure SKYPE and use the native android SIP to make calls via SKYPE? i hate opening Skype every time i want to make Skype call to india from here..

sharan.mu said:
Can we configure SKYPE and use the native android SIP to make calls via SKYPE? i hate opening Skype every time i want to make Skype call to india from here..
Click to expand...
Click to collapse
Sorry, Skype is not supported.

Works great very positive feedback

Confirmed, this mod is also working on LQ2 firmware without any issues.
Sent from my GT-N7000 using Tapatalk 2

[XOLEW][Xolo A500S][Custom]ROM

Dear XDA community users and Xolo A500s owners,
I found that we don't have a dedicated thread for this phone,thus starting a new one with some of my contributions.
NOTE: Never use the FLASHTOOL (any version) for A500s as it bricks the device since the preloader.bin file from stock rom also corrupts the rom in case you need to restore. :laugh::laugh:
Flash CWM or unbrick A500s with SP flash tool procedure
1) Extract the attached file on your computer (link)
2) Download xolo drivers from here (link)
3) Shutdown your phone and remove battery
4) Open SpFlash tool with admin priviledges and click next to scatter file to choose the MT6572 one from the downloaded folder
5) The tool will pick and check preloader.bin automatically and remaining ones will be unchecked (Select preloader.bin only if your device is bricked if its not and you only need to have cwm installed proceed to step 6)
6) To install CWM now double click on boot and recovery image and point to the downloaded folder to select boot_patch and recovery_patch accordingly (Remember to check it)
7)Now click Download and connect the phone via usb to computer (During this process your PC will show unknown device so in order to install device drives download xolo drivers and choose to select the inf file and it will get installed).Remove USB once and ensure download is clicked prior and then usb cable is inserted to PC.
8) The process will begin and a green circle saying ok will be displayed and thus the flashing is successful.
9) Now disconnect the device and put in battery and hold power and volume up key to sucesfully boot into CWM and there by unbrick your device...
10) Then you can install any custom rom created by other developers.
Note: If you wish to load complete stock rom for Xolo A500s download the stock rom from the links ABTri has posted in his forum and replace the preloader.bin with the attached one. This will restore your ROM to factory default with stock recovery.
To begin with i present you the stock deodexed cwm rom for our own Xolo A500s phone.
Steps:
1) Root your phone with framaroot (http://forum.xda-developers.com/attachment.php?attachmentid=2293503&d=1380569629)
2) Install MTKdroidTools 2.4.8 from here (http://dfiles.eu/files/fmnok7ke7)
Download and run the MTKdroidTools.exe (Note enable usb debugging on your phone and grant root access from the mtkdroid app to access your phone)
Then backup your existing rom by clicking on root ,backup,recovery tab and backup. this will back up your entire stock rom in case you want to revert.
3) For CWM install click on Recovery and boot and choose the option "To choose the boot.img file" and then select your stock boot.img file which u backed up. Next it will patch it with CWM autoinstaller just click yes and ok and the device will reboot. Woola you now have a working CWM to proceed.
Steps to install the deodexed rom
1) Boot into CWM recovery and download the stock deodex rom from here (http://www.toobigtosend.net/download/279913c4-3bd3-11e3-a7f9-005056ac53f8/)
2) Copy the downloaded rom to the sd card--> clockwordmod -> backup folder
3) Say restore and navigate to the cwmbackup folder and select it
4) Clear Dalvik cache and cache partition
Thats its reboot and you are on deodexed rom..
More download links will be available shortly Stay tuned..
This is the start of my development so i need more ideas on what can be included additionally.
And yes use the thank meter if you want to appreciate the work
Added new download link.
http://yadi.sk/d/j4zOwIfrBTMSp
Good news everyone, so the rom is finally here!!
DOWNLOAD LINK ROM v1
DOWNLOAD LINK ROM v2
Changelog v1:
1) Stock de-odexed & zipaligned based on 4.2.2
2) Removed all bloatwares which includes Xolo specific apps,google +, clock,taalk,themes,stock keyboard ,music etc
3)Added Xperia mod keyboard,inverted playstore,sms and calendar app.
4)Bravia mod is attached although i didnt see much difference
5)Viper audio added and works smooth.
6)Native Kitkat apps like google now,search and laucher added.
7)Font change to incorporate the new kitkat roboto
8)Included ES file explorer
Changelogs v2
1)Fixed clock
2)Added hangouts with sms integration
3)Added Google gallery for google pics sync
4)Some more bloatwares freed
5)Nexus 5 sounds,bootanimation,launcher and stock apps added except chrome google+
6)More smooth than earlier,less ram usage
Changelogs v3
1)Removed native kitkat apps
2)Remove google apps except google contact sync
3)Several build prop tweaks
4)Optimized RAM usage
5)New windows style audio/video player
6)Cool bootanimation (This hints something is coming soon )
7)Ported bravia mod,Xperia Z1 keyboard
8)Inverted SMS app
9)Nova modified launcher
10)And other cool softy
Changelogs XOLEW
1) Base firmware as S018 from official Xolo A500 Club
2) Completely deodexed and removed some bloatwares
3)New SMS app with themes/ miui style Dialer/Floating apps included
4)Smooth scrolling with 0 lag
5)Recent task bar get button to kill all at once
6)All new Xolo launcher with excellent themes
7)Cool new bootanimation from Xolo
8)Camera tweaks and addon
9)And ....many more so explore....
How to enable floating apps?
Just press back led button and u will see a small window in center screen..It contains media/video player which can be floated alongwith your other tasks.
DOWNLOAD XOLEWv1
If you need google apps and playstore with google now please use this additional package from goo.im to download and install.
V3 DOWNLOAD LINK
How to install
1) Root your phone as mentioned above and have CWM installed
2) Copy the rom in \sdcard and then clear/wipe data cache and dalvik cache. Format system also
3) Go to mounts and storage and ensure to see /system is mounted (unmount system is what we want to see on cwm menu)
4) Select install from sdcard and navigate through the zip and install it.
First boot may take some time to install and thats it the rom is up.
Enjoy and share your experience to make this development ongoing
Please hit thanks if you like the work....
**Screenshots attached***:good::good::good::good:

Upload all files at mediafire AND PLEASE UPLOAD A VIDEO TUTORIALS ABOUT FLASHING CWM AND DEODEXED STOCK ROM :sly::sly::sly:
NO ONE IS PERFECT

Definitely video and update is on the cards.
Sent from my A500s using xda app-developers app

Try to make a themed stock based gaming ROM with no stock bloatware applications
NO ONE IS PERFECT

Dear vishal, first of all THANK YOU very much for this.. (if possible, I could have pressed that thanks button hundred times!) The CWM works perfectly fine.
Still, I was not able to flash this rom as it said "md5 mismatch!" While trying to flash it through cwm.. I hope u find a solution to this and share with us ASAP or just tell me if I am doing something wrong...
Once again, thanks for that much needed Cwm!!
Sent from my A500s using xda app-developers app

KrishMehta said:
Dear vishal, first of all THANK YOU very much for this.. (if possible, I could have pressed that thanks button hundred times!) The CWM works perfectly fine.
Still, I was not able to flash this rom as it said "md5 mismatch!" While trying to flash it through cwm.. I hope u find a solution to this and share with us ASAP or just tell me if I am doing something wrong...
Once again, thanks for that much needed Cwm!!
Sent from my A500s using xda app-developers app
Click to expand...
Click to collapse
* Simply open clockwordmod>backup>your back folder in your SD card
* Now open the nandroid.md5 file with any text editor application and delete all text in it and save it or make a file with name nandroid.md5 ( replace it with original file)
**If above doesn't work try below commands**
TYPE BELOW COMMANDS IN TERMINAL EMULATOR
su
# mount -o remount rw /sdcard
#cd /sdcard/clockworkmod/backup/2012-04-17.10.09.36(
WRITE NAME OF YOUR BACKUP FOLDER)
#rm nandroid.md5
#md5sum *img > nandroid.md5
***ENJOY FLASHING ROM IN CWM***
** REMEMBER TO PRESS THANKS BUTTON **
KNOW MORE TWEAKS ETC FOR XOLO A500S GO HERE
http://forum.xda-developers.com/showthread.php?t=2495531
NO ONE IS PERFECT

Ok guys so i am almost into final stages of building rom..can someone let me know if a complete black theme works and if any audio mod works live viper or beats.i have cut down all bloatwares..so stay tuned..
Sent from my A500s using xda app-developers app

vishalgunthey said:
Ok guys so i am almost into final stages of building rom..can someone let me know if a complete black theme works and if any audio mod works live viper or beats.i have cut down all bloatwares..so stay tuned..
Sent from my A500s using xda app-developers app
Click to expand...
Click to collapse
dont know bout the theme but yes Viper works perfectly fine (Both FX & XHiFi).. couldnt flash AC!D, may be its not supported!

Thank you and i will include viper.
Also some good news. The new leaked kitkat apps work flawlessly on the device except for Google now which throws an error so looking for fix.
Here are some of the screen shots from current development build.
Sent from my A500s using xda app-developers app

vishalgunthey said:
Thank you and i will include viper.
Also some good news. The new leaked kitkat apps work flawlessly on the device except for Google now which throws an error so looking for fix.
Here are some of the screen shots from current development build.
Sent from my A500s using xda app-developers app
Click to expand...
Click to collapse
Screenshots??? where???

Ok everyone good news.. The rom is ready to be uploaded. This is a cwm flashable.. Lot of things added modified with inverted apps and native kitkat apps added along with viper.
Will post detailed Changelogs and screenshot.
I have tested it and must say it is smooth with around 249 mb free ram..
Removed almost all bloatwares.
Stay tuned.WIP..
Sent from my A500s using xda app-developers app

Thanks
vishalgunthey said:
Ok everyone good news.. The rom is ready to be uploaded. This is a cwm flashable.. Lot of things added modified with inverted apps and native kitkat apps added along with viper.
Will post detailed Changelogs and screenshot.
I have tested it and must say it is smooth with around 249 mb free ram..
Removed almost all bloatwares.
Stay tuned.WIP..
Sent from my A500s using xda app-developers app
Click to expand...
Click to collapse
Waiting for your ROM

iamnimit said:
Waiting for your ROM
Click to expand...
Click to collapse
me to awaiting...

KrishMehta said:
me to awaiting...
Click to expand...
Click to collapse
All the rom has been posted on page 1.. Enjoy

vishalgunthey said:
Dear XDA community users and Xolo A500s owners,
I found that we don't have a dedicated thread for this phone,thus starting a new one with some of my contributions.
NOTE: Never use the FLASHTOOL (any version) for A500s as it bricks the device since the preloader.bin file from stock rom also corrupts the rom in case you need to restore.
To begin with i present you the stock deodexed cwm rom for our own Xolo A500s phone.
Steps:
1) Root your phone with framaroot (http://forum.xda-developers.com/attachment.php?attachmentid=2293503&d=1380569629)
2) Install MTKdroidTools 2.4.8 from here (http://dfiles.eu/files/fmnok7ke7)
Download and run the MTKdroidTools.exe (Note enable usb debugging on your phone and grant root access from the mtkdroid app to access your phone)
Then backup your existing rom by clicking on root ,backup,recovery tab and backup. this will back up your entire stock rom in case you want to revert.
3) For CWM install click on Recovery and boot and choose the option "To choose the boot.img file" and then select your stock boot.img file which u backed up. Next it will patch it with CWM autoinstaller just click yes and ok and the device will reboot. Woola you now have a working CWM to proceed.
Steps to install the deodexed rom
1) Boot into CWM recovery and download the stock deodex rom from here (http://www.toobigtosend.net/download/279913c4-3bd3-11e3-a7f9-005056ac53f8/)
2) Copy the downloaded rom to the sd card--> clockwordmod -> backup folder
3) Say restore and navigate to the cwmbackup folder and select it
4) Clear Dalvik cache and cache partition
Thats its reboot and you are on deodexed rom..
More download links will be available shortly Stay tuned..
This is the start of my development so i need more ideas on what can be included additionally.
And yes use the thank meter if you want to appreciate the work
Added new download link.
http://yadi.sk/d/j4zOwIfrBTMSp
Good news everyone, so the rom is finally here!!
DOWNLOAD LINK ROM v1
Changelog v1:
1) Stock de-odexed & zipaligned based on 4.2.2
2) Removed all bloatwares which includes Xolo specific apps,google +, clock,taalk,themes,stock keyboard ,music etc
3)Added Xperia mod keyboard,inverted playstore,sms and calendar app.
4)Bravia mod is attached although i didnt see much difference
5)Viper audio added and works smooth.
6)Native Kitkat apps like google now,search and laucher added.
7)Font change to incorporate the new kitkat roboto
8)Included ES file explorer
Do not install the hangout from playstore as it may crash since the framework is updated to support 4.4.I will post the updated hangout app for leaked 4.4
How to install
1) Root your phone as mentioned above and have CWM installed
2) Copy the rom in \sdcard and then clear/wipe data cache and dalvik cache. Format system also
3) Go to mounts and storage and ensure to see /system is mounted (unmount system is what we want to see on cwm menu)
4) Select install from sdcard and navigate through the zip and install it.
First boot may take some time to install and thats it the rom is up.
Enjoy and share your experience to make this development ongoing
Please hit thanks if you like the work....
Click to expand...
Click to collapse
Screen shorts please...
NO ONE IS PERFECT

Downloading the ROM... will install on my A500S and reply with my views on it...
How much RAM u get free?
Is battery performance improved?
How come in 1screenshot, color of clock is yellow n in others, its BLUE?

The free ram is around 200mb
The status bar is white in color
The Battery backup On an average Use is around 1 day.
Sent from my A500s using xda app-developers app

vishalgunthey said:
The free ram is around 200mb
The status bar is white in color
The Battery backup On an average Use is around 1 day.
Sent from my A500s using xda app-developers app
Click to expand...
Click to collapse
Downloaded the Rom..
>Nice UI
>Xperia keyboard is better den stock one
>File manager is removed.
>Installed Apps (Super SU, ES File explorer, Facebook r not updated to latest version)
>Phone is smoother (due to deodexing/ZIPaligning i think)
>Not many extra tweaks / Vanila OS
> Play store is different. I think it may be of kitkat / or it may be modded.
In settings / display, theme is not working (FC)

iamnimit said:
Downloaded the Rom..
>Nice UI
>Xperia keyboard is better den stock one
>File manager is removed.
>Installed Apps (Super SU, ES File explorer, Facebook r not updated to latest version)
>Phone is smoother (due to deodexing/ZIPaligning i think)
>Not many extra tweaks / Vanila OS
> Play store is different. I think it may be of kitkat / or it may be modded.
In settings / display, theme is not working (FC)
Click to expand...
Click to collapse
Thank you for testing it out..
I have noted all those items and will try to incorporate with additional kernel tweaks in next version...:victory:

screenshots for recovery????