Formatted /system, /data, /cache and reboot. Thats why stuck at sony ericsson logo. xRecovery doesnt work.
Tried SEUS: Latest already.
PcCompanion: No update.
Any FlashTool can i use to flash it?
You can find everything here:
forum.xda-developers.com/showthread.php?p=12442257
But why did u format system??Never do it again.
(In the system there are the os,and the recovery's files.if u delete these,dont wonder if your phone doesnt boot)
Sent from my X8 using XDA Premium App
heheh you shouldnt delete the /system
try this with this rom (2.1.1.A.0.6 Nordic firmware with latest SE kernel and baseband)
if i restore a rom, it doesnt format previous rom, so some system files are unreplaced.
so i format it. after that i have to restore a rom, but i was trying to restore a zip but failed, on curiosity i reboot and see. xD
Solved, use flashtool to install 1.6 and update with seus to 2.1. then root and install xrecovery, load modded rom.
Who told you that restoring doesnt deletes the previous rom? It does!
Sent from my X8 using XDA App
anant123 said:
Who told you that restoring doesnt deletes the previous rom? It does!
Sent from my X8 using XDA App
Click to expand...
Click to collapse
no one told. i experienced it myself.
i added some files in /system, after i restore my backup, system files remain unreplaced. so format it and everything is new.
I had similar experience with my X8, also formated system.
But it's not a problem to fix with SEUS.
After getting message that my Software is latest, I just click on INSTALL at the bottom left part of SEUS window.
And then I have to follow instructions.... and original Eclair will be installed!
/System/ is a virus as system32 at windows ;+)
Sent from my X8 using XDA App
i need some help
I tried to change my Gingerbread from V28 to V25 as I was told on the forum that it would run better. They recommended that I install CWM. I ran the installation and hit the restart but the phone wont start up. It must have been the wrong version for Xperia X8. Although it did say it was for all Xperia phones.
My Sony Ericsson Xperia X8 phone is stuck at the Sony Ericsson screen and I cannot get to Xrecovery let alone start up my Gingerbread.
What can I do now ? Running any software on the PC is no good as it says there is nothing plugged in.
I have made a copy of my SDCARD but how can I get it working again ?
@zhuzhang
I dont wanna be an enemy but you were here for sometime and complains a lot. I know you can figure out by your own.
@aindriu
That version dont use xrec anymore its cwm to avoid errors.
Bro, please don't revive dead threads.. ask your problem in a new thread.
Sent from my E15i using Tapatalk 2
---------- Post added at 11:12 PM ---------- Previous post was at 11:10 PM ----------
Just flash the stock Rom via flashtool.
Sent from my E15i using Tapatalk 2
I've got it sorted. Thanks
Just for Re-read purposes, if anybody else has this problem I have created an easy guide to restore your x8 back to its original state
HERE: http://forum.xda-developers.com/showthread.php?t=1840124
Remember you must be on stock kernel and baseband.
Open Seus
Don't connect your phone.
Select repair phone.
Select your phone from the list.
Seus will download a software for your phone.
After that take out your battery nd insert it again. Don't power up your phone.
Connect USB to PC then press back button on your phone nd connect USB on your phone wait till seus finds your phone.
It will install the software.
Hurrrrraayyyy...
Press thanks if I helped you.
Sorry 4 ma bad EnGlISh
Now you r all done.
E15i
unlocked bootloader
nAa-jb kernal
Mini cm10
Related
Hi. I've Xperia X8 : Rooted, downloaded rom (miniCM7 2.0.7) and all this in CWM.
I tried to install GingerDX but you know GingerDX need xRecovery not CWM so i searched to install xRecovery then I found this apk app( http://forum.xda-developers.com/showthread.php?t=1128854 ) i installed it and installed xRecovery and everything ok BUT when i rebooted my phone my phone stuck in the Boot screen (Sony Ericsson) and nothing new! HELPP PLEASEthxxxx all
Umm, maybe you can try repairing with PCC or SEUS.
Can you still get to xrecovery?
If yes, you can restore a backup with it.
If not, then flash the stock ROM again with Flashtool/SEUS/PCC
And the next time you want to install GingerDx, install the Dual Mode Recovery, it´s very easy, just search for it.
mmm
Well, i wanted xRecovery, but now im scared i want to find a good tutorial on the forum but i dont know, can someone recommend me one that is good for my xperia x8
@Himalay & @codfreak thxx I softwared my phone and everything is ok.
Now I installed xRecovery again (root, busybox, root explorer and I moved all to system/bin ) but when I rebooted my phone and when I pressed the back button its stuck again in logo screen, but when I don't press the back button its start without stucks! Any help ?
Sent from my E15i using XDA App
iLilDark said:
@Himalay & @codfreak thxx I softwared my phone and everything is ok.
Now I installed xRecovery again (root, busybox, root explorer and I moved all to system/bin ) but when I rebooted my phone and when I pressed the back button its stuck again in logo screen, but when I don't press the back button its start without stucks! Any help ?
Sent from my E15i using XDA App
Click to expand...
Click to collapse
I recommend sticking to CM7. I tried flashing gingerdx yesterday too...way too many probs just to flash 1 rom
Sent from my X8 using XDA App
My Friend was trying use SEUS and it's work... you only follow the SEUS instruction for restore it... and important u need Connection Internet
bumenoo said:
My Friend was trying use SEUS and it's work... you only follow the SEUS instruction for restore it... and important u need Connection Internet
Click to expand...
Click to collapse
If im not mistaken, you update/repair via SEUS, right ?
Sent from my X8 using XDA App
Yup.. that's right... you can restore your phone use SEUS or Flash
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
i have do that for 5 or 6 times whit different roomx..stucks at sony logo. I restore it at 2.1 whit seus. Every time when i try..it fail!
Any help..please!
Sory for bad english
Flash your phone with seus,pc companion or flashtool.I always flash my phone with seus
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
which ROm are you trying to install? Please provide more info on your problem, so we could help you better
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
There are some problem that causes custom rom cannot boot. I will state the problem but, you gonna go search it for yourself.
1.Busybox not correctly installed
2.Root incorrectly
3.Baseband incompatible
4.Rom need custom kernel to work (Extra care.)
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
Im guessing your coming from stock ,, so heres what you gotta do
if you bought the cell recently you don't need tio update your baseband,,
anyways heres what you must do
1. Root your phone
2.install xrecovery /Cwm
3.Move your desired rom to you memory cards,, not on any folder directly on the card
4. reboot and open xrecovery/Cwm(whichever the rom requires)
5.Data reset
6.Flash rom
anyways some roms require custom kernels in that case learn howto unlock your bootloader and flash the required custom kernel
and your good to go
Hit the thanks button if i helped
AbirXtreme said:
Im guessing your coming from stock ,, so heres what you gotta do
if you bought the cell recently you don't need tio update your baseband,,
anyways heres what you must do
1. Root your phone
2.install xrecovery /Cwm
3.Move your desired rom to you memory cards,, not on any folder directly on the card
4. reboot and open xrecovery/Cwm(whichever the rom requires)
5.Data reset
6.Flash rom
anyways some roms require custom kernels in that case learn howto unlock your bootloader and flash the required custom kernel
and your good to go
Hit the thanks button if i helped
Click to expand...
Click to collapse
Also THE MAIN ONE make sure usb debugging is enabled
I do that all the time when i trying..
I do this for some times..5 or 6..whit different rooms. all the time stucks at sony logo and i can't enter in xRec or CWM..i restore it whit seus
przemek4113 said:
Flash your phone with seus,pc companion or flashtool.I always flash my phone with seus
Click to expand...
Click to collapse
I do that all the time when i trying..
AbirXtreme said:
Im guessing your coming from stock ,, so heres what you gotta do
if you bought the cell recently you don't need tio update your baseband,,
anyways heres what you must do
1. Root your phone
2.install xrecovery /Cwm
3.Move your desired rom to you memory cards,, not on any folder directly on the card
4. reboot and open xrecovery/Cwm(whichever the rom requires)
5.Data reset
6.Flash rom
anyways some roms require custom kernels in that case learn howto unlock your bootloader and flash the required custom kernel
and your good to go
Hit the thanks button if i helped
Click to expand...
Click to collapse
I do that..for 5 or 6 times..it fails!
tujamo1 said:
I do that..for 5 or 6 times..it fails!
Click to expand...
Click to collapse
-use flashtool
Okay now,
-root your phone(turn on usb debugging. don't remove usb yet)
-install busybox (don't remove usb yet)
-reboot your phone, if flash tool on PC showing busybox version : XXX XXX or whatever you are good to go if not, redo, (Problem in flashtool, driver or usb debugging not turned on)
-install xRecovery
-continue on Post by AbirXtreme ~
Note: when busybox showing version, there's is no need to use seus to go back again. you may just pull out the battery(with usb unplugged), wait for 10 sec and turn on again. Experiment with installing xRecovery on phone boot-up and try again without using seus... and if you stuck on the sony ericsson logo, wait... then try lock your screen. if screen can be locked (turn dark) mean that your root+busybox are good but xRecovery are not, just try many times to get to it.... and if all those above is not working... search other dev or thread
---------- Post added at 11:47 AM ---------- Previous post was at 11:40 AM ----------
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
i have do that for 5 or 6 times whit different roomx..stucks at sony logo. I restore it at 2.1 whit seus. Every time when i try..it fail!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
ah, sorry to my previous post.... i wasn't read it carefully....
now that you can enter xRecovery/Cwm is good
now what you need is,
1. check the rom post for more info, if it says for custom kernel/alfs kernel/nAa kernel. Sorry you can't use this as your rom.(unlocking your bootloader will fix this issue. WARNING:It's dangerous, search )
2. Try flash my Fix for stock kernel and Fix for low performance at my post in dev section
3. Try full-wipe in every rom if you still have this problem
4. Cannot help your further
A little stupid hint...
Are you sure you are stuck at se logo? I mean, have you wait enough? Sometimes it gets up to 5 min to start and especially first time...
Sent from my E15i using xda premium
I think I understand you problem here
I think I understand your problem here.
Do not Full wipe after installing ROM
Always full wipe before installing, not after....I hope this helps
Change Your Baseband! if Your Baseband finish in .......06
you need change it to ............15
Check your baseband in Settings/about phone
I Haved This problem and I Solve it Changing My Baseband! xD
so as mine can any one know how to upgrade 11W42
it is probably the fact you need custom kernel. But before trying to unlock bootloader, turn phone off,, take back cover and battery off and check your phones date ie
10w56 or 11w34 etc
Sent from my X8 using XDA App
sambavadekar said:
I think I understand your problem here.
Do not Full wipe after installing ROM
Always full wipe before installing, not after....I hope this helps
Click to expand...
Click to collapse
Not in some cases. Some DEVS put when to do full wipe. So it depends on what the installation instructions are
Sent from my X8 using XDA App
CKKnot said:
-use flashtool
Okay now,
-root your phone(turn on usb debugging. don't remove usb yet)
-install busybox (don't remove usb yet)
-reboot your phone, if flash tool on PC showing busybox version : XXX XXX or whatever you are good to go if not, redo, (Problem in flashtool, driver or usb debugging not turned on)
-install xRecovery
-continue on Post by AbirXtreme ~
Note: when busybox showing version, there's is no need to use seus to go back again. you may just pull out the battery(with usb unplugged), wait for 10 sec and turn on again. Experiment with installing xRecovery on phone boot-up and try again without using seus... and if you stuck on the sony ericsson logo, wait... then try lock your screen. if screen can be locked (turn dark) mean that your root+busybox are good but xRecovery are not, just try many times to get to it.... and if all those above is not working... search other dev or thread
---------- Post added at 11:47 AM ---------- Previous post was at 11:40 AM ----------
ah, sorry to my previous post.... i wasn't read it carefully....
now that you can enter xRecovery/Cwm is good
now what you need is,
1. check the rom post for more info, if it says for custom kernel/alfs kernel/nAa kernel. Sorry you can't use this as your rom.(unlocking your bootloader will fix this issue. WARNING:It's dangerous, search )
2. Try flash my Fix for stock kernel and Fix for low performance at my post in dev section
3. Try full-wipe in every rom if you still have this problem
4. Cannot help your further
Click to expand...
Click to collapse
Thant's man. It work!
wilbso said:
Not in some cases. Some DEVS put when to do full wipe. So it depends on what the installation instructions are
Sent from my X8 using XDA App
Click to expand...
Click to collapse
I'm do this all the time when i flash a new rom. But a had make my phone work. Thanks anyway!
samu1player said:
Change Your Baseband! if Your Baseband finish in .......06
you need change it to ............15
Check your baseband in Settings/about phone
I Haved This problem and I Solve it Changing My Baseband! xD
Click to expand...
Click to collapse
My baseband ends with .......15
i just install mini cam7 to my x8, after i reboot my phone it stuck in sony ericsson logo. they any solution for this problem????
By mini cam7 you mean MiniCM7?
If you see Sony Ericsson logo, it means that you are on stock kernel. MiniCM7 is for nAa kernel.
Solution - click
Solution?
Here you go- http://forum.xda-developers.com/showthread.php?t=1771338
sandung said:
i just install mini cam7 to my x8, after i reboot my phone it stuck in sony ericsson logo. they any solution for this problem????
Click to expand...
Click to collapse
You can use Flashtool to flash a stock ROM and act like nothing happened..
If you can still go to cwm by pressing back button while boot then you can get a rom that works on stock kernel on to your sd card and flash it or if u have back up then just reatore it..
Or
If u can't go to cwm then flash stock rom .Ftf file available in our development section and flash it..
Heres a guide to flashing
http://forum.xda-developers.com/showthread.php?t=1755215 http://forum.xda-developers.com/showthread.php?t=1755215
Sent by the walking walkman..
sidhart said:
If you can still go to cwm by pressing back button while boot then you can get a rom that works on stock kernel on to your sd card and flash it or if u have back up then just reatore it..
Or
If u can't go to cwm then flash stock rom .Ftf file available in our development section and flash it..
Heres a guide to flashing
http://forum.xda-developers.com/showthread.php?t=1755215 http://forum.xda-developers.com/showthread.php?t=1755215
Sent by the walking walkman..
Click to expand...
Click to collapse
No 1
Sent from my E15i using xda premium
okay!
This is for the last option! if didn't work to repair it using PC companion or SEUS
1. download X8 E15i 2.1.1.C.0.0._un.ftf from file crop and you willl get your phone on 2.1
2. install your flashtool
3. make sure if your baseband is 015 !
4. root your phone by clicking padlock icon in the Flashtool!
5. install xrecovery with flashtool by clicking the cross icon
6. unlock bootloader using s1tool and make sure if your phone type is not 11w29+ !!
http://forum.xda-developers.com/showthread.php?t=1254225
7. flash the latest kernel
8. backup
9. factory reset, wipe data, etc
10. Flash ROM
DOne!
BlackRabbit1703 said:
okay!
This is for the last option! if didn't work to repair it using PC companion or SEUS
1. download X8 E15i 2.1.1.C.0.0._un.ftf from file crop and you willl get your phone on 2.1
2. install your flashtool
3. make sure if your baseband is 015 !
4. root your phone by clicking padlock icon in the Flashtool!
5. install xrecovery with flashtool by clicking the cross icon
6. unlock bootloader using s1tool and make sure if your phone type is not 11w29+ !!
http://forum.xda-developers.com/showthread.php?t=1254225
7. flash the latest kernel
8. backup
9. factory reset, wipe data, etc
10. Flash ROM
DOne!
Click to expand...
Click to collapse
how many times have i see this post?!
this is spam and it is against the rules, at your post there is a number at the up , right corner, if you click at it you can see just your post, copy url and post it instaid of copy paste your post one hundrent times!!!!
really, i am geting bored of seeing this post everywhere
stamatis16 said:
how many times have i see this post?!
this is spam and it is against the rules, at your post there is a number at the up , right corner, if you click at it you can see just your post, copy url and post it instaid of copy paste your post one hundrent times!!!!
really, i am geting bored of seeing this post everywhere
Click to expand...
Click to collapse
what????
really dude?!
I made it by my self
just typing on my own keyboard
okay okay...
in the future I'll not doing spam again as you tell like that dude,,
thx! :laugh::laugh:
the easiest way to get back ur phone is using PCC.
Select "repair phone" and ur X8 will be back to stock
Hello guys!
I recently tried to update my rom to my xperia x8 and i chose ICS minicm9 - shakira 3-0-4 for xperia x8. I unlocked my bootloader succesful and i installed the nAa kernel version 2.6.29.6 to my phone (i forgot to say i ve already rooted it and did a backup file with xrecovery).
Anyways the phone stuck at the sony ericsson screen after the kernel screen and never opened... I opened CWM , made a backup , wiped the data and tried to install the ICS but every time i tried (3-4 times) i got an error : "Can't open /sdcard/MiniCM9-3.0.4-shakira.zip (bad) Installation aborted". I tried to do my xrecovery backup but CWM couldn't find any backup files! I tried to connect phone with PC companion in flash mode but it recognises it as an xperia x10 and i can't do anything with it!!! I tried everything pls help me!!!:crying:
Leftaas said:
Hello guys!
I recently tried to update my rom to my xperia x8 and i chose ICS minicm9 - shakira 3-0-4 for xperia x8. I unlocked my bootloader succesful and i installed the nAa kernel version 2.6.29.6 to my phone (i forgot to say i ve already rooted it and did a backup file with xrecovery).
Anyways the phone stuck at the sony ericsson screen after the kernel screen and never opened... I opened CWM , made a backup , wiped the data and tried to install the ICS but every time i tried (3-4 times) i got an error : "Can't open /sdcard/MiniCM9-3.0.4-shakira.zip (bad) Installation aborted". I tried to do my xrecovery backup but CWM couldn't find any backup files! I tried to connect phone with PC companion in flash mode but it recognises it as an xperia x10 and i can't do anything with it!!! I tried everything pls help me!!!:crying:
Click to expand...
Click to collapse
first of all.... cwm will never find the backup made by xrecovery because they are in different folders... for cwm to find them take the backup folder from xrecovery folder to the clockworkmod folder...
and then
reflash the kernel and try installation again to remove that stuck at SE logo problem.....
you need to install """"nAa ICS"""" kernel for miniCM9.... i think you installed nAa GB kernel and that is what creating problems..
try installing rom after that if it shows error there is some problem with the zip file i suppose... tell me if it gives error after this and see if it gives status 6 or status 7 error..
anyway you will have to redownload the zip..something might have went wrong during download.
and the flashtool recognizes it as x10 because you set it that way...reinstall it...
when it asks you do you want to "permanenty identify device?" i think you selected x10... next time it asks you select X8
Here's my opinion. I'm not sure how but if what you say is true, that you're running nAa ics kernel, it shouldn't be stuck at the SE logo. 2nd, if you're on a custom kernel, you won't have xrecovery. Third, our phones, after flashing kernels are recognized as X10's, not X8's.
@CnC-ROCK xrecovery backups can't be restored that way. i tried and failed
@OP if you've successfully installed nAa-ICS then you should not see the SE logo. try reflashing and wiping cache partition.
Well nothing worked! I have the proper kernel for my device and everything but i can't install the ICS and i did what you said me about the restore but it told me something about MD5 (doesn't match i think or something)
Reflash stock kernel.Then flash the ROM again. And finally flash your kernel back.
Please Press The Thanks Button
It's my matter how I send this.
Please stop telling me to reflash again! I told you i did it many times and nothing worked! Please tell me how i can change to the basic kernel and then i ll do the process again from the begin , as nothing works! Thank you!
Download flashtool and stock firmware then flash firmware through flashtool
Sent from my MANGO using Tapatalk2
IAmNice said:
Didnt he just say dont tell him to reflash stock again?
As for the OP. Ive never seen this before. Cant think of a solution yet.
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
He actually said don't tell him to reflash custom kernel. And to be honest if he's seeing anything with Sony on boot then he definitely isn't flashing right.
OP how exactly did you flash the ICS kernel?
Sent from my GT-I9000 using xda premium
download the file again, sometimes it happens when the file is not properly downloaded.
@op try to restore with pccompanion.
If you can't do this,you have to flash (stock kernel and stock rom)
Sent from my X8 using xda premium
sgt. meow said:
@CnC-ROCK xrecovery backups can't be restored that way. i tried and failed
@OP if you've successfully installed nAa-ICS then you should not see the SE logo. try reflashing and wiping cache partition.
Click to expand...
Click to collapse
they dont work..but they are listed i think... dont remember... i mean just to list and not use....he said he was unable to see them....
---------- Post added at 06:07 PM ---------- Previous post was at 06:05 PM ----------
RohinZaraki said:
Here's my opinion. I'm not sure how but if what you say is true, that you're running nAa ics kernel, it shouldn't be stuck at the SE logo. 2nd, if you're on a custom kernel, you won't have xrecovery. Third, our phones, after flashing kernels are recognized as X10's, not X8's.
Click to expand...
Click to collapse
flashtool recognizes my phone as X8 and not X10...according to what you are saying then there is problem in my flashtool....
NIMBAH said:
He actually said don't tell him to reflash custom kernel. And to be honest if he's seeing anything with Sony on boot then he definitely isn't flashing right.
OP how exactly did you flash the ICS kernel?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I connext my phone to the pc with the usb then i open flashtool and select xperia x8. Then i click the flash icon(1st icon) and click flashmode i select the kernel i want and then i click "ok" i wait til it says me it's done and i unplug the usb and reboot my phone.
Sorry for reposting but it has been quite a lot of time i ve posted and none respond! So! I flashed the stock kernel and backuped (the person who told me to do it took a "thank you") and now i want to redo the process... What do you suggest me so that i won't stuck again on this step??
follow instructions!!? (I guess..)
Guys i tried again today and now i get another error!
CWM says :
Installing /sdcard/update.zip
Finding package...
Opening package...
E: opening /res/keys : No such file or directory
E: Failed to load keys
Installation Aborted.
Now?
didn't see all posts ... nvm
I've searched through XDA (manually and with search function) but can't find the answer I need, so am trying here hoping someone will help.
I was running GingerDX v29 on my X8, happily, when I was notified of an update to v030. I left it a few days and then got the notification of an update to v031b. There was two options on the screen: Download GingerDX v031b, or download GingerDX stock. I figured since I'm already using GingerDX I should be able to just download the new version rather than the stock.
So I downloaded it to my SD card, rebooted to CWM and choose to install the download. All seemed to go through fine, I got a success message, and was invite to reboot. I rebooted, and I'm now stuck with "Sony Ericsson" across my screen and nothing else. No access to CWM etc.
I guess I have two questions:
1) Can I get back to v29 or finish off the update to v031b, without having to erase everything and redo whatever it was I had to do to get v29 on there in the first place (v29 was the first ROM I installed on my handset)?
2) What should I have done when presented with the options for upgrading? (I'd kinda like to acoid the same mistake in future.)
All help gratefully received, and I'll be liberal with the Thanks button
TIA
in CWM wipe cache and dalvk cache
if phone doesnt boot flash v29 back and create backup
than flash 31b,wipe data/cache and advance restore data from backup created earlier...wipe cache again
good luck
and post questions in Q/A section
fotak-x said:
in CWM wipe cache and dalvk cache
Click to expand...
Click to collapse
Unfortunately I'm stuck at the Sony Ericsson screen and can't get to CWM...
Thanks though.
(Can a moderator move this to the right forum if this is the wrong one?)
pgd80 said:
I've searched through XDA (manually and with search function) but can't find the answer I need, so am trying here hoping someone will help.
I was running GingerDX v29 on my X8, happily, when I was notified of an update to v030. I left it a few days and then got the notification of an update to v031b. There was two options on the screen: Download GingerDX v031b, or download GingerDX stock. I figured since I'm already using GingerDX I should be able to just download the new version rather than the stock.
So I downloaded it to my SD card, rebooted to CWM and choose to install the download. All seemed to go through fine, I got a success message, and was invite to reboot. I rebooted, and I'm now stuck with "Sony Ericsson" across my screen and nothing else. No access to CWM etc.
I guess I have two questions:
1) Can I get back to v29 or finish off the update to v031b, without having to erase everything and redo whatever it was I had to do to get v29 on there in the first place (v29 was the first ROM I installed on my handset)?
2) What should I have done when presented with the options for upgrading? (I'd kinda like to acoid the same mistake in future.)
All help gratefully received, and I'll be liberal with the Thanks button
TIA
Click to expand...
Click to collapse
Are you using a custom or stock kernel?
Sent from my GT-I9100 using xda premium
Titan9119 said:
Are you using a custom or stock kernel?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
"sony ericsson" logo on boot...thats stock kernel
Yeah, I think it's stock (I soft-bricked the handset once before, and followed instructions elsewhere on XDA to unbrick it - I think those instructions used a stock kernal)
Sent from my Transformer TF101 using xda app-developers app
pgd80 said:
Yeah, I think it's stock (I soft-bricked the handset once before, and followed instructions elsewhere on XDA to unbrick it - I think those instructions used a stock kernal)
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
Hmm...then did u wipe data/cache?
Sent from my GT-I9100 using xda premium
pgd80 said:
I've searched through XDA (manually and with search function) but can't find the answer I need, so am trying here hoping someone will help.
I was running GingerDX v29 on my X8, happily, when I was notified of an update to v030. I left it a few days and then got the notification of an update to v031b. There was two options on the screen: Download GingerDX v031b, or download GingerDX stock. I figured since I'm already using GingerDX I should be able to just download the new version rather than the stock.
So I downloaded it to my SD card, rebooted to CWM and choose to install the download. All seemed to go through fine, I got a success message, and was invite to reboot. I rebooted, and I'm now stuck with "Sony Ericsson" across my screen and nothing else. No access to CWM etc.
I guess I have two questions:
1) Can I get back to v29 or finish off the update to v031b, without having to erase everything and redo whatever it was I had to do to get v29 on there in the first place (v29 was the first ROM I installed on my handset)?
2) What should I have done when presented with the options for upgrading? (I'd kinda like to acoid the same mistake in future.)
All help gratefully received, and I'll be liberal with the Thanks button
TIA
Click to expand...
Click to collapse
you should have downloaded gingerdx for stock since you are on stock kernel. i guess gingerdx stock means the one for stock kernel
Titan9119 said:
Hmm...then did u wipe data/cache?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I think I did (as part of the v029 install (or maybe it was the v030 install - I can't even remember which one of those I was on)), but I can't say for sure. I definitely didn't when I tried to update to v031b. I just ran the .zip and when I got the confirmation of success I rebooted. Haven't got passed the Sony Ericsson logo since.
CnC-ROCK said:
you should have downloaded gingerdx for stock since you are on stock kernel. i guess gingerdx stock means the one for stock kernel
Click to expand...
Click to collapse
What would I need to have been running in order to have used the GingerDX v31b? (Sorry - I'm still learning about stock, kernels, ROMs, Alfs, nAa etc, so don't yet understand what they all mean / do / are used for.)
Is there any way I can recover my phone without having to reinstall all my apps etc?
pgd80 said:
What would I need to have been running in order to have used the GingerDX v31b? (Sorry - I'm still learning about stock, kernels, ROMs, Alfs, nAa etc, so don't yet understand what they all mean / do / are used for.)
Is there any way I can recover my phone without having to reinstall all my apps etc?
Click to expand...
Click to collapse
you have unlocked bootloader? if so then flash custom kernel and it will boot fine.
you can use adb to backup your apps or flash back the previous version and backup them.
you might have downloaded the rom that was not for stock kernel.
your phone is soft bricked, can be repaired using sony pc companion.
Look for a thread to repair a soft bricked phone.
its so easy..
i am stuck for 2 day. i do for many way for disolve my problem. stuck in logo sony, because i wipe, and i dont install new/custom kernel.
i want install jelly bean
many flash i tried cannot fix this problem
for last step, i download latest "pc companion"
and i follow step by step.
fail and try. error and try.
failed connect and i try..
(i forget my capacity baterries is low)
and bla bla bla....... pc companion can fix this problem
with factory kernel
and factory os: "ENCLAIR" KKKKKKKK
ending of stories ... i install again with rom ginger
i hope can solve your problem
i bricked my phone installing stock gingerdx to custom rom.... sm1 plz help... wifi nt working cmw nt working.. is my x8 lost
x8bricked said:
i bricked my phone installing stock gingerdx to custom rom.... sm1 plz help... wifi nt working cmw nt working.. is my x8 lost
Click to expand...
Click to collapse
Post #2
http://forum.xda-developers.com/showthread.php?t=1481630
sent using internet explorer, hope it reaches on time :fingers-crossed:
my phone is only nt getting detected in sony pc companion
x8bricked said:
my phone is only nt getting detected in sony pc companion
Click to expand...
Click to collapse
Use flashtool
sent using internet explorer, hope it reaches on time :fingers-crossed:
Gogeta said:
Use flashtool
sent using internet explorer, hope it reaches on time :fingers-crossed:
Click to expand...
Click to collapse
flash tool is aborting with error msg
---------- Post added at 05:21 PM ---------- Previous post was at 05:17 PM ----------
Gogeta said:
Post #2
http://forum.xda-developers.com/showthread.php?t=1481630
i tried it bt still my device is nt properly installed plz help
Click to expand...
Click to collapse