hi
when i flash any rom using odin
it told me
PHP:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
then nothing happen !!
it stuck in mibib download
so,,, any help
islam_ashraf said:
hi
when i flash any rom using odin
it told me
PHP:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
then nothing happen !!
it stuck in mibib download
so,,, any help
Click to expand...
Click to collapse
Hey!
Can you go into recovery option(POWER+HOME button together, untill it going to menu)? If you can, MAYBE FATCORY SETTINGS and CACHE CLEANING helping. Try and let US know here.
CHEERS!
Did you enable debugging mode on Odin? Try disabling it... Which version of Odin you have?
@casiocas
i dont have recovery it happen when i want to flash VillainROM and i forgot to
Perform a full wipe of data/cache. Dial *#*#7780#*#* from your current ROM, and this will wipe data and perform a factory reset.
Click to expand...
Click to collapse
@fla.sh
debugging option is disabled and my odin version is 4.38
can i flash recovery by odin ?
in this topic ([OFFICIAL] ClockWorkMod 4.0.0.9 - Flash via recovery)
i must have recovery to flash it
I think it's not bricked. It tends to stop at that part. Try to flash again, then wait for more than 1 minute, 2 mins top (you can see the counter on the left side of Odin) then see if it ends to the part "Close serial port... blah blah" then your phone restarts.
i left my phone about 88 minute !! it freeze in the same point
i think if i can flash any recovery version using only odin and then wipe and factory rest my phone it will work
now im trying http://forum.xda-developers.com/showthread.php?t=1121192 but recovery file size is very big 205 Mega !!
Which ROM you're trying to flash?
any rom
already tried S5830XXKPH and VillainROM
and others
every rom stuck in the same point
just flash the recovery from
[RECOVERY]Unofficial ClockworkMod Recovery v4.0.0.2(WIP)
and its pass !!
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> boot.img download..
<1> 1/4 Finished.
<1> recovery.img download..
<1> 2/4 Finished.
<1> system.rfs download..
<1> 3/4 Finished.
<1> data.rfs download..
<1> 4/4 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
Click to expand...
Click to collapse
but when i press POWER+HOME button together
it didn't take me to recovery screen
Dose it NOT going into RECOVERY, if you push together HOME+POWER? You must push them, until you screen flashing ONCE and after this wait to GALAXY ACE..., not only to SAMSUNG, but after SAMSUNG... is coming GALAXY ACE... logo, then you can RELEASE your HOME+POWER buttons and NOW YOU must be in OFFICIAL recovery screen.
CHEERS!
oka
now im in recovery i wipe data /factory rest
and wipe cashe partitien
and when flash rom by odin still have the same problem
tried to flash by another pc
and the same message i get !!!
can i flash any room via recovery ??
also need to know some thing
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this Download mode is normal ??!
islam_ashraf said:
also need to know some thing
this Download mode is normal ??!
Click to expand...
Click to collapse
Jep,its normal, if you get to thereOWER+HOME+VOL.DOWN. holding together THREE buttons in once(its needed to FLASH with ODIN). Just asking(dont take personally), do you know EXACTLY, how to FLASH with ODIN?(in case, if you dont know it, read this: http://forum.xda-developers.com/showpost.php?p=12874680&postcount=1)
CHEERS!
casiocas said:
Jep,its normal, if you get to thereOWER+HOME+VOL.DOWN. holding together THREE buttons in once(its needed to FLASH with ODIN). Just asking(dont take personally), do you know EXACTLY, how to FLASH with ODIN?(in case, if you dont know it, read this: http://forum.xda-developers.com/showpost.php?p=12874680&postcount=1)
CHEERS!
Click to expand...
Click to collapse
Lol
i have samsung spica
and i break my phone about 777 time!!
and i fix it do its jot my first time using odin
but the problem with ace its stuck in the same point in all rom
befor thats happend i flash the arabic rom and my friend doesnt like it cause it have a bad look in addidtion it doesnt contain market!!
so i try a cooked rom witch exist in developer section(i cant rember the name of the rom, i open from my mobile.)
and the problem start when i faild to flash the cooked rom
then i thought it the wrong with the cooked rom
so i try another and others rom
and the same problem happen!!
by the way the first flash rom screen it come normal
(the android robot have a tool and remove something)
and it changed after i flash the arabic rom
sorry for a lot talk
islam_ashraf said:
Lol
i have samsung spica
and i break my phone about 777 time!!
and i fix it do its jot my first time using odin
but the problem with ace its stuck in the same point in all rom
befor thats happend i flash the arabic rom and my friend doesnt like it cause it have a bad look in addidtion it doesnt contain market!!
so i try a cooked rom witch exist in developer section(i cant rember the name of the rom, i open from my mobile.)
and the problem start when i faild to flash the cooked rom
then i thought it the wrong with the cooked rom
so i try another and others rom
and the same problem happen!!
by the way the first flash rom screen it come normal
(the android robot have a tool and remove something)
and it changed after i flash the arabic rom
sorry for a lot talk
Click to expand...
Click to collapse
LOL!
NP, just asked.
Maybe you can try the first STOCK FROYO release. Sometimes ROM-s can mess up bootloader. It may help. If not then I dont REALLY know how to help you(I am not developer. Havnt PROGRAMMER knowleage. SORRY!). Hope you get it FIXED(sometimes it takes A LOT of trying to flash ROM-s, before it finally get fixed). Just START from beginning(from FIRST FROYO release). And if this not working, try ONLY STOCK ROM-S after FROYO(GB_2.3.3 AND 2.3.4). Try AGAIN. We will see.
CHEERS!
did you have coolya's ext4 kernel installed??..that could have messed up the partitions because it converts the file system to ext4 from rfs...
btw the same error occurred when i flashed Code.ROMv1 but i ignored it and it worked out fine...
kills999 said:
did you have coolya's ext4 kernel installed??..that could have messed up the partitions because it converts the file system to ext4 from rfs...
btw the same error occurred when i flashed Code.ROMv1 but i ignored it and it worked out fine...
Click to expand...
Click to collapse
Jeah, you right, but I was ABLE ALWAYS flash with ODIN after messing up things. But in hes case its little different.
CHEERS!
i didnt have any kernel
the problem start when i try to flash villainrom
after flashing the arabic official rom
oka i think i will try flash [ROM]Code.ROMv1
but i cant find the download link !!
what a luck im so lucky in these days !!
and how to know my file sysytem tyb
i went to the recovery and cant find any information about it
just flash S5830XWKC3 (2.2.1)
and thats what i get
so how can i convert my file system to the normal type
Related
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
home+power not open recovery mod
i dont flash rom phone is not open
Download mode opening or not?
yes download mode is opening work
Then try to flash stock from again
follow step by step tutorial here,
yagyagaire.blogspot.com/2011/12/how-to-upgrade-samsung-galaxy-pop-to.html
I tried different roms and I tried to install recovery mode but the same result not flashing
Thanks for your help I will try it now
my ops file is corrupt, so nothing is happening was changed and now tank u so much :victory: :laugh:
K dude Congrats...
Next time press thanks button instead of writing it ;-)
Sent from my GT-S5570 using xda premium
My SGS Plus shows me a faulty triangle logo when I boot up normally or Recovery, but I am able to go Download mode.
I tried to flash an official firmware to restore the phone but got stucked in the first step forever.
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
I searched all among the internet, and tried:
a) Removing the .MD5 extension from firmware zip.
b) Use a Windows XP PC
c) Try another USB port
d) Untick Protect OPS from Odin
e) Use an older version of Odin
f) Kies, LOL
Which never worked...
darristan said:
My SGS Plus shows me a faulty triangle logo when I boot up normally or Recovery, but I am able to go Download mode.
I tried to flash an official firmware to restore the phone but got stucked in the first step forever.
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
I searched all among the internet, and tried:
a) Removing the .MD5 extension from firmware zip.
b) Use a Windows XP PC
c) Try another USB port
d) Untick Protect OPS from Odin
e) Use an older version of Odin
f) Kies, LOL
Which never worked...
Click to expand...
Click to collapse
Your phone issent bricked,i had the same issue.
What worked for me is installing the Broodrom.
Here is the link : http://forum.xda-developers.com/showthread.php?t=1396837
Everything you need is posted by Broodplank in his first post.
Once you installed it, you can go back to any rom you would like, altough de Broodrom is a very good rom!!
If you have cwm installed, try to format your partitions first?
Hope this will help you in some way,
How can I flash BroodROM if I couldn't go to CWM at all, I don't see if there is odin flashable package...
darristan said:
My SGS Plus shows me a faulty triangle logo when I boot up normally or Recovery, but I am able to go Download mode.
I tried to flash an official firmware to restore the phone but got stucked in the first step forever.
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
I searched all among the internet, and tried:
a) Removing the .MD5 extension from firmware zip.
b) Use a Windows XP PC
c) Try another USB port
d) Untick Protect OPS from Odin
e) Use an older version of Odin
f) Kies, LOL
Which never worked...
Click to expand...
Click to collapse
I have the samme issue as you. (((
Have you found a way to solve it? :[
darristan said:
Have you found a way to solve it? :[
Click to expand...
Click to collapse
If your asking me, No, not yet ((
darristan said:
How can I flash BroodROM if I couldn't go to CWM at all, I don't see if there is odin flashable package...
Click to expand...
Click to collapse
Look better, BroodRom can be installed with Odin.
http://sourceforge.net/projects/broodrom/files/broodROM_RC5.rar/download
Follow the instructions in Cybertek's post.
I hope I was useful.
My SGS Plus shows me a faulty triangle logo when I boot up normally or Recovery, but I am able to go Download mode.
I tried to flash an official firmware to restore the phone but got stucked in the first step forever.
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
I searched all among the internet, and tried:
a) Removing the .MD5 extension from firmware zip.
b) Use a Windows XP PC
c) Try another USB port
d) Untick Protect OPS from Odin
e) Use an older version of Odin
f) Kies, LOL
Which never worked...
Click to expand...
Click to collapse
hi. did you fix that because i have the same problem and i'm looking for help please
hac12 said:
hi. did you fix that because i have the same problem and i'm looking for help please
Click to expand...
Click to collapse
try this http://forum.xda-developers.com/showthread.php?t=1802098
xsenman said:
try this http://forum.xda-developers.com/showthread.php?t=1802098
Click to expand...
Click to collapse
thanks for the help but it still dosen't work. i treid:broodROM_RC5_Extras_Only and/GT-I9001_XEO_I9001XXKPU_I9001XXKPH_I9001OXAKP1
and it didn't boot. after i treid to flash via odin FeaModRecovery_1.2.tar and it stuck on samsung logo. i'm asking if you can link me a good rom so i can flash it i have 9001 gsmh thanks in advance
Dear All,
please help me as my phone displays the same screen as "http://broodplank.net/old/flashsamsungi9001.php" and i tried the instruction in the same link but it stuck for 100 min after:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
<1> 1/7 Finished.
<1> adsp.mbn download..
<1> 2/7 Finished.
<1> boot.img download..
<1> 3/7 Finished.
<1> system.img.ext4 download..
so please help urgently !!!!!!!!!
try to chang pc or usb port
pierpa86 said:
try to chang pc or usb port
Click to expand...
Click to collapse
I already changed the USB port but not the PC
You posted in the bad location!
Btw: flash broodrom(the odin version). I had the same problem and the broodrom saved me.
P.s: never flash a rom if you know it won't work
cezaralboiu said:
You posted in the bad location!
Btw: flash broodrom(the odin version). I had the same problem and the broodrom saved me.
P.s: never flash a rom if you know it won't work
Click to expand...
Click to collapse
--------------------------------------
i didn't understand what you says but i think you mean that you solved this issue, how did you ??? PLEASE
engmarwan10 said:
--------------------------------------
i didn't understand what you says but i think you mean that you solved this issue, how did you ??? PLEASE
Click to expand...
Click to collapse
Try to change PC. When I'm first time change my soft, i had the same on my PC, in Laptop flashing is normal. And i don't know why
engmarwan10 said:
--------------------------------------
i didn't understand what you says but i think you mean that you solved this issue, how did you ??? PLEASE
Click to expand...
Click to collapse
He means this one http://sourceforge.net/projects/broodrom/files/broodROM_RC5.rar/download
Just flash it the same way I explained it in my tutorial, btw why aren't you looking for the new tutorial? http://broodplank.net/?p=234
1. stop panicking...you are not helping yourself...if you can still enter download mode (which you obviously can) then you're all good..
2.try restarting your PC (helped me a few times when i got stuck)
3.if that doesn't work try changing USB cable and port
good luck:good:
You have to format your pc before flash or try another Pc. Thats all
Joy` said:
You have to format your pc before flash or try another Pc. Thats all
Click to expand...
Click to collapse
lol
Joy` said:
You have to format your pc before flash or try another Pc. Thats all
Click to expand...
Click to collapse
Don't give that kind of tips... Better shut up your mouth and just don't tell anything
I think your usb cable just loose .
. . Try to flash broodrom my friend it will revive your phone
Why dont you use this thread?
http://forum.xda-developers.com/showthread.php?t=1826216
check
check that no other usb port is engaged. while using odin
nevar27 said:
I think your usb cable just loose .
. . Try to flash broodrom my friend it will revive your phone
Click to expand...
Click to collapse
-----------------------------------
this ROM should be flashed using odin over download mode ???
Dear All,
Thank you so much all for you help I fluched the BroodROM CR5 and it worked fine and yes the problem was on my PC as when i tried another one it worked just like that.
:good::angel::good::good::good::good:
It just does this: http://www.youtube.com/watch?v=u_GfK5DpsZE
I was using ODIN to flash a recovery to it, which I've done before successfully. Screwed up this time though. ODIN cutely claimed success though:
http://i.imgur.com/R4cd6fW.png
Here's the whole log from ODIN, but nothing looks out of the ordinary:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> recovery.img download..
<1> 1/2 Finished.
<1> csc.rfs download..
<1> 2/2 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
EDIT 1: I can put it into Download mode but not into recovery
EDIT 2: Tried to flash a stock ROM, no success
Is that the odin version u use regularily? Try 1.85
Phone Slow? go ------>HERE<------
_____________________________________
"Google took 4 years to reach android 4.0.4 and apple to reach android 1.6"
---------- Post added at 08:36 PM ---------- Previous post was at 08:35 PM ----------
Also that ops thing is that all u flashed?
Phone Slow? go ------>HERE<------
_____________________________________
"Google took 4 years to reach android 4.0.4 and apple to reach android 1.6"
TingTingin said:
Is that the odin version u use regularily? Try 1.85
Also that ops thing is that all u flashed?
Click to expand...
Click to collapse
I'll try 1.85, thanks.
I was flashing CWM recovery, you can see the .tar file at the bottom
What I said won't work 1.85 doesn't have that slot I thought u bricked your device
Try flashing full pckg stock rom again.
Sent Via XDA™ Premium
whenever you see a big partition size in the log that means either the ops file or the odin is not proper
I am following the wiki instructions to flash an SGH-T679 back to stock firmware using Odin, using the files at the links provided:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_Exhibit_4G
Prior to this, the only thing I did to the phone was to upgrade to AOSP 4.1.2 using stock recovery, which worked fine.
http://forum.xda-developers.com/showthread.php?t=2081011
However Odin does not seem to be writing anything to either the system or preload partitions when I do this (and now the phone will no longer boot past the splash screen). I have tried both Odin 4.43 and 4.44.
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> e - unknown file - "preload.img.ext4"
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
<1> 1/4 Finished.
<1> adsp.mbn download..
<1> 2/4 Finished.
<1> boot.img download..
<1> 3/4 Finished.
<1> cache.img.ext4 download..
<1> 4/4 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
Click to expand...
Click to collapse
I did notice that the key combination to enter the bootloader changed after I ran Odin: it went from Volume Up + Home + Power to just Volume Up + Power.
I have not attempted to repartition or format the internal memory at any point. I am wondering if perhaps the Ancora.ops in the post above does not match the partition table on my device? Or is there something else I should try?
Thanks in advance!
Solved: the Ancora.ops file in uvlg3.odin.zip on the Wiki page is missing the preload partition. I added "12,preload" to the bottom of the file (per arco's Ancora.ops file found by Google -- can't link to it because I'm new to the forum).
dpward said:
Solved: the Ancora.ops file in uvlg3.odin.zip on the Wiki page is missing the preload partition. I added "12,preload" to the bottom of the file (per arco's Ancora.ops file found by Google -- can't link to it because I'm new to the forum).
Click to expand...
Click to collapse
Did you use uvlg3.flash2.stock.zip for firmware from the Wiki page? Coz I didnt find this file on the Wiki page.
ILCooL said:
Did you use uvlg3.flash2.stock.zip for firmware from the Wiki page? Coz I didnt find this file on the Wiki page.
Click to expand...
Click to collapse
Look just a few lines below that on the page, where it says:
FILES NEEDED:
Download Odin (Google it) and the stock factory images: uvlg3.odin.zip
I found the file, but after making firmware I see the next: "firmware upgrade encountered an issue. Plase select recovery mode in Kies & try again". And there's a mistake: big partition size!!
Where can I find 3-filed firmware for odin?