[Open Thread] Thoughts On Otterbox Case For EVO Shift 4G - EVO Shift 4G Accessories

So I just wanted to start a thread for myself and anyone else who may want to read it
Basically anyone who has an otterbox case for the evo shift or has seen/used it or whatever just leave your opinions/reviews whatever. I am thinking of buying one so just wondering

I don't have one for the Shift but I've used an Otterbox on other devices and would recommend it if you have the slightest fear of damaging your handset.
I believe the last one I used was a Commuter which completely encased the handset and seemed to be able to take a hit. The back was too smooth for me so I had a little trouble re-learning how to hold it and the thickness of the handset increased significantly but overall it felt safe. Worth the extra money.

I am using the otterbox commuter case on my shift right now. I like it a lot. The fit and finish seems like it is completely a part of the phone. Only two complaints are:
1. If I try to move an icon from one hone screen to another, the piece covering the screen makes it difficult to move it to the "edge" - not a big deal, you learn to adjust.
2. When opening the slider, I hear a click sound, sounding like the little tabs holding the upper piece on are catching as it moves. Again, kinda not picky.
All in all, I think it is a great case and makes me worry a lot less about dropping my device. I would definitely recommend it.
Sent from my PG06100 using XDA App

Awesome seems like ill want to pick it up. I recently cracked the screen on my shift and made a few scuff marks so that's what seriously turned me to getting the case.

notsointeresting said:
Awesome seems like ill want to pick it up. I recently cracked the screen on my shift and made a few scuff marks so that's what seriously turned me to getting the case.
Click to expand...
Click to collapse
Tip for putting on the included screen protector...patience and a clean work surface! I couldn't get it to work well at first, then I ended up dropping it on the carpet. I was ready to give up on it until my wife took it from me and got it to work. So...if you have the patience of an ADHD kid on meth like I do...lol. It was my first screen protector too so. Anyways have fun!
Sent from my PG06100 using XDA App

definitely worth getting. i have the commuter series otterbox and it makes my phone look and feel like a beast. only thing that annoys me sometimes is the dust/lint that gets stuck to the rubber on the case, but i just blow it off.

zeke803 said:
2. When opening the slider, I hear a click sound, sounding like the little tabs holding the upper piece on are catching as it moves. Again, kinda not picky.
Click to expand...
Click to collapse
I haven't had a problem opening the slider at all.
I have one and love it! Top of the line case, looks good feels good and protects good! I would totally recommend it to anyone with a Shift!..

I use it on my shift, and have had them on two other phones. Like everyone else said, its a great case, and really does look like a part of the phone.
Sent from my PG06100 using Tapatalk

I'm now on my second otterbox after a free factory replacement, my only nit pics are the usb port cover doesn't stay closed, and it clicks everytime I open it, feels like one of the clips is catching....
Sent from my MiuiSpeedy

Just got the Commuter series and I'm a fan so far. Makes the phone feel more substantial and gives a better grip. The only issue was with the headphone and USB port covers, which didn't stay down. I just removed them, but DON'T Rip them off, it'll tear the rubber casing. Found that out on the USB port one so I cut the headphone one off. Either way makes the rubber a little loose around the port but not hugely annoying unless you're a perfectionist(which I can be). I'll just apply a little glue and seat it on the plastic frame.
Sent from my PG06100 using XDA App

Thanks for the answers guys! I'm definently going to pick one up in a couple days.
I do want to keep this thread open just so anyone can ask questions/leave other reviews for other people.

notsointeresting said:
Thanks for the answers guys! I'm definently going to pick one up in a couple days.
I do want to keep this thread open just so anyone can ask questions/leave other reviews for other people.
Click to expand...
Click to collapse
Got the Otter Box Commuter of Ebay for 24.97 free shipping. in retail box

wcherin said:
Got the Otter Box Commuter of Ebay for 24.97 free shipping. in retail box
Click to expand...
Click to collapse
That's great. The retail price from otterbox.com is $35 so thats a great buy. There's just something about ebay that I can't trust lol. That's me and my paranoia tho.

notsointeresting said:
That's great. The retail price from otterbox.com is $35 so thats a great buy. There's just something about ebay that I can't trust lol. That's me and my paranoia tho.
Click to expand...
Click to collapse
Check also Amazon I got mine for about the same price .. 20 something and It's safer than eBay (for me it is)

kbrn said:
Check also Amazon I got mine for about the same price .. 20 something and It's safer than eBay (for me it is)
Click to expand...
Click to collapse
Wow I found one for 22 on amazon thanks for the tip man

Once you have the front plate on the phone. How the hell do you get it off????
Sent from my HTC Sensation 4G

Xx12thANG3LxX said:
Once you have the front plate on the phone. How the hell do you get it off????
Sent from my HTC Sensation 4G
Click to expand...
Click to collapse
Its almost inpossible without breaking the case. I broke one of the clips in the process..... thank goodness for a warranty!
Sent from my MiuiSpeedy

Rooster85 said:
Its almost inpossible without breaking the case. I broke one of the clips in the process..... thank goodness for a warranty!
Sent from my MiuiSpeedy
Click to expand...
Click to collapse
I guess that's not technically a bad thing if the fronts hard to get off.
I just hope the back isn't the same when I get mine.
Is it?

notsointeresting said:
I guess that's not technically a bad thing if the fronts hard to get off.
I just hope the back isn't the same when I get mine.
Is it?
Click to expand...
Click to collapse
Nope I can confirm that, being really careful you can take the back without any problem..
I Think that the front parts being hard to take off it's a good thing.

Had mine for 2 or 3 months now
Bought it from Amazon for like $25 when they finally came available for the shift and had to wait a month before I got it in hand.
I'm not as impressed as i would be with the protection if it was a defender case. I had the black case with fake carbon fiber and belt clip before. The otterbox commuter is better then that one, by how much I'm not sure.
I dropped my phone about a month ago. I don't know if it just hit the right place of the case, and the back case came flying off the phone, the side clips where busted off, so the back case would not stay on any more.
I decided to call up otterbox and see if it was under warr. and if they would replace it. AMAZINGLY they said YES so they shipped me a new one for free i didn't even have to pay shipping. NICE. It was quick and easy I thought that was soooo cool. Because of that i will continue to buy otterbox, and recommend them to others.
In future i hope to buy defender cases (better protection) which means no more slider phones which i think i am ready for now that touch screens are so much better. All my old phones have been sliders with full keyboards from back in the day with my old HTC t-mobile MDA, which made me find this site.
Thats my 2 cents.

Related

Free Invisible shields (StealthGuards)

Cross posted from the desire topic, sorry for that, but just so you can save yourself some money. Just saw this offer and wanted to share it, free protectors at Stealthguard .I don't know if they are any good, but they only charge transport costs for now
cyleo said:
Cross posted from the desire topic, sorry for that, but just so you can save yourself some money. Just saw this offer and wanted to share it, free protectors at StealthGuard. I don't know if they are any good, but they only charge transport costs for now
Click to expand...
Click to collapse
Shouldn't you mention that you posted an AFFILIATE link?
EP2008 said:
Shouldn't you mention that you posted an AFFILIATE link?
Click to expand...
Click to collapse
Mm, i didn't know that, it was just the link i found on the interweb. Anyway, got my send notification, i'll report back when i've installed them.
I ordered mine last week sometime, I kept forgetting to post the link (non-affiliated link iirc).
Thank you for the link! 2.85 dollars for that protection is a very nice price! Bought a Copter Display Shield (same type as StealthGuard) for about 35 bucks in Sweden ...
Thanks a bunch, just got my Milestone protector for €2,22
Thx i get mine too i hope they will delivering me in France !
Sent from my HTC Legend using XDA App
Just ordered to Denmark, sounds like a great deal. I had an InvisibleShield for my Magic, which I wasn't that pleased with. It fell off rather quick and got black-ish instead of see-through. Lets see how this stuff works on a Legend.
can someone tell me why I would need such a thing? The legend is housed in aluminum already, and I highly doubt it could be scratched. I could understand if someone is using this just for the screen protector, but still, there are ones that cost less on ebay...
nivlack said:
can someone tell me why I would need such a thing? The legend is housed in aluminum already, and I highly doubt it could be scratched. I could understand if someone is using this just for the screen protector, but still, there are ones that cost less on ebay...
Click to expand...
Click to collapse
Everything scratches, and if you plan on selling your phone after you have upgraded in the future, it will still look brand new if you had a product like this on it.
Scratched it already, happens easier then you'd think!
Ordered one. Heared from people that you have to use a lot of water to install them properly, and that they have a very rubbery feel. But hey they are nearly free...
Sent from my HTC Legend using Tapatalk
I got mine yesterday.
Yes, these really feel rubbery as the plastic is fairly thick.
The really anoying thing is that the side pieces go all the way from the top to the plastic piece on the bottom therefore you can't open it, or, you can cut it like I did
Overall it's a good product for the price (muhahah).
Not worth the postage fee to be honest
Very thick - bends when trying to remove them from the paper they come on, and a nightmare to install - What more do you expect for free? lol
Got mine yesterday and I must say that I'm very happy with them. Installation is like on every protector with liquid...I must say that they are definitely better than the zagg ones witch were I nightmare for me to install on my girlfriends iPhone. All you need is PATIENCE and lot (and I mean a lot) of water! I've put water in a bowl with 2 drops of dish washing liquid, then make your fingers wet and take the protector slowly off it's paper (it's easier with wet fingers), and then put the whole protector in the water, let it drip off(not completely), apply and patiently wait 6 ours or use a hair dryer to get it done quicker (but you will still have to wait after). With the part's that include bending you should do the flat part and wait until it starts to stick, and then bend the other parts.
Sent from my HTC Legend using Tapatalk
Let me warn u guys not to use this... i used it, it sucks and guess what... when u peel it off, it pulls ur HTC silver logo out with it...
spicyjoe said:
Let me warn u guys not to use this... i used it, it sucks and guess what... when u peel it off, it pulls ur HTC silver logo out with it...
Click to expand...
Click to collapse
heh figures...
i guess if you go through all the trouble of getting one of these on, should atleast be a good one.

Matte Case Review

I recently ordered a Matte TPU case from a seller on ebay in Hong Kong. I like giving my phone some color on occasion but nothing overbearing or ugly. I dont like the clearish TPU cases with patterns because unless you get it in black or white (clear), the color looks awful to me against the black phone. So i decided to give the matte ones a go and i love it. The only down side is that i wish the buttons werent covered at all, it makes them a bit more sensitive but at least they arent hard to press and i suppose i could just cut it out. For now it doesnt really bother me.
I doubt these cases will provide much shock protection from a bad drop but i think they look good and are extremely slim. I went from using the Amzer to this and my phone feels naked now lol. Ill switch back and forth for when i feel like i need better protection. It feels great in my hand and slides easily in and out of my pocket. The plus about this case is that it doesnt have that hideous random red tramp stamp strip on the back like majority of the matte TPU cases. Im extremely anal about how my phone looks so that was a h*ll no. Also, youll see in the pic below that the front edges are a bit shiny, they arent matte like the back and i guess it adds something to the design. The material covering the buttons is the same thats around the edges. So if you wanted to attempt at cutting and freeing them from confinement, you already have an outline.
The seller i purchased from is out for the Chinese New Year but i think it says they will resume sales on the 11th or 12th. I purchased on the 23rd of January and got it on the 7th so thats pretty average wait time coming from HK.
I also tried out the "S" case that has a thread here in the forum, and way too snug for my liking and i didnt like the gloss next to the matte, so if anyone wants it i can mail it to you or its going in the trash. (i got it in black.)
Here are two pics, sorry i dont have one of it on the actual device but the best camera i own is....my Nexus lol. The itouch fails miserably at a decent photo. And yes remember it is flexible...
Pic 1
Pic 2
Hope thats somewhat helpful!
xoxo
Cam
Sorry but that looks rly cheap to me
~Sent from my Nexus S with Swype~
xdahd2 said:
Sorry but that looks rly cheap to me
~Sent from my Nexus S with Swype~
Click to expand...
Click to collapse
Then dont buy one. It was a couple bucks maybe? Its not like there are tons of cases out there that are worth the money so a little on the cheap side doesnt bother me. I wanted plain, slim, and color and thats what this is. I think its hard to avoid a "cheap" look when you spend 4 bucks on a TPU case. But anyway, thats what the review is for...to help you decide if you want one or not.
@thaqueencami: I think I've seen you before on the blackberry forums.
Sent from my Nexus S using XDA App
peeturr said:
@thaqueencami: I think I've seen you before on the blackberry forums.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Lol yeah i had one for a couple years and i themed.
thaqueencami said:
Lol yeah i had one for a couple years and i themed.
Click to expand...
Click to collapse
Yeah, I was wondering about that lol. Are you going to be theming for the NS? (nudge).
peeturr said:
Yeah, I was wondering about that lol. Are you going to be theming for the NS? (nudge).
Click to expand...
Click to collapse
Haha I've been told a few times that I should but I don't think I have time to learn with school going on. I see like....3 girls on this forum so its kind of intimidating lol. The most I've even done for myself is make docks. I'm working on an icon set though that's been taking forever. Add me to gtalk...same name.
i actually got this case in white. It's actually a very good case for $1 and change. It is very slim. I love it. The buttons are easier to push then the ones on the amzer case.
Definitely worth the $1!!!

Otterbox Commuter Series quick/dirty review

I'll do a more detailed review tonight and switch out the photos with better ones too.
First impressions: Holy crap this is huge!
It is very reminiscent of the commuter series for the HTC Hero (of course). However, this one feels a bit more "rugged".
The case has the standard plugs for the headphones and microusb ports. It also has the raised areas for the volume rocker and on/off button. The front is well protected and thick enough to not really have to worry about placing the phone face down.
It was much easier to attach than the Sedio Innocase! And conversely, it's a PAIN to remove (which is a good thing!)
It takes about the same amount of force to slide open the keyboard. It's borderline too hard for me.
Oh, the keyboard lights aren't completely covered either! Granted you still can't see them looking directly down at the phone, you can see them if you tilt the phone back a little.
My initial qualms are:
1) The case is slightly too long for the phone. The top of the case that is around the keyboard is loose. Not just a little, but it looks like it wasn't even meant for this phone.
2) Like the mini-usb plug on the Hero's commuter series, the micro-usb plug on the Shift's commuter series doesn't want to stay in.
3) Since the back side is beveled and it's semi-hard to slide out, it sometimes takes a couple tries because it keeps slipping out of my hands.
Nit-picks:
1) Backside cover is off-center (flash/camera/speaker aren't centered in their respective cutouts)
2) No silicone on the front so when it's face down it slides around easily (compared to the hero which had silicone bumpers on the front)
Where did you get it from? Still says preorder on my end
Sent from my MiuiSpeedy with that Premium XDA App
just ordered mine, hope its protective. It feels good to raw dog, but its dangerous.
Rooster85 said:
Where did you get it from? Still says preorder on my end
Sent from my MiuiSpeedy with that Premium XDA App
Click to expand...
Click to collapse
Otterbox.com EVO Shift 4G Commuter Series
southernstyle said:
just ordered mine, hope its protective. It feels good to raw dog, but its dangerous.
Click to expand...
Click to collapse
It's does a very good job of covering up the phone and not being loose.
Got mine today, as wizputer noted the mini-usb isn't snug enough to remain in the port. Otherwise, very impressed with the design and construction of the case.
got mine in today, very pleased. although it was a little bit of a b*^&h to put on. After getting it on I noticed the usb plug being a pain, and the power button seems to need a lil extra force to actually click, but other than that love it. I feel safe now
Good review, disappointed, love my Otterbox's for my EVO and HD2. The split covers though, Shift and Tilt (from experience), just do not seem to provide the same kind of coverage but I do not know what else they could do to make them better.
nativ73 said:
Got mine today, as wizputer noted the mini-usb isn't snug enough to remain in the port. Otherwise, very impressed with the design and construction of the case.
Click to expand...
Click to collapse
I ended up cutting my usb plug off because of the headache it was causing.
Sent from my MiuiSpeedy
Rooster85 said:
I ended up cutting my usb plug off because of the headache it was causing.
Sent from my MiuiSpeedy
Click to expand...
Click to collapse
Actually you just have to know how to make it stay there's a little trick to it when you close it. You have to kinda pull the thing up a little bit and then slide it in and stays. That's how mine works anyways ..
kbrn said:
Actually you just have to know how to make it stay there's a little trick to it when you close it. You have to kinda pull the thing up a little bit and then slide it in and stays. That's how mine works anyways ..
Click to expand...
Click to collapse
Oh well, too late. The microusb doesn't need to be covered really anyways
Sent from my MiuiSpeedy
I just always wiggle the flap into the port, best case by far would definately recomend. ORDER FROM OTTERBOXS WEBSITE, when it first came out I tried it from amazon (it was $10 less) but the expected shipping date was in june.
No I'm not using Tapatalk... I'm using the XDA Premium app, cause I got balls.
Be careful with the otterbox guys, dropped mine for the first time today and 3 of the 4 clips to hold the back on broke, making the case absolutely useless..... waste of 30 bucks!
Sent from my MiuiSpeedy
When. That happens call otterbox and they will no auestions asked replace it usually takes 1week shipping I've had 5 so fardo this and most recently they sent me 2x so I don't need to calll next timeill. Be prepared...love this company
Sent from my PG06100 using xda premium
+1 to that . They have like you said Replaced mine about 4x's. Never once asked for anything but my address. Best company ever . Have since bought Otter Boxes for all my Devices.
I got this case mid August, and about a week ago, I dropped it. While in free fall, the top of the case just fell off my phone and broke in half. Sad thing is, I dropped it from about 2 feet. But yes, I called it in, and they are sending me in another, just have to watch out for my phone a bit more! (At least I get to replace the screen protector, put it on kinda bad, XP

FlyGrip a necessity?

I am surprised no one has posted about this as of yet.
QBKing77's youtube channel has a video review of this "contraption".
Currently there is a deal where you get a free TPU case (i think thats what it is called) with the purchase of a $30 FlyGrip.
He also mentions how you get a discount by using his name at the checkout.
I am almost convinced to get one, but would like your input on this.
Check out this video where he discusses the flygrip (somewhere in there).
FlyGrip
prohackas said:
I am surprised no one has posted about this as of yet.
QBKing77's youtube channel has a video review of this "contraption".
Currently there is a deal where you get a free TPU case (i think thats what it is called) with the purchase of a $30 FlyGrip.
He also mentions how you get a discount by using his name at the checkout.
I am almost convinced to get one, but would like your input on this.
Check out this video where he discusses the flygrip (somewhere in there).
Click to expand...
Click to collapse
--------------
I just purchased one. Thanks for the tip.
Thanks for sharing, looks like a great idea
Not sure if it would add too much bulk
Pricing with shippingmmakes it quite expensive for us international buyers
I've been using it for about a week now, and haven't regretted that decision. It's definitely a must if you're using your N2 a lot with single hand. I'm still waiting for Aduro case to release their awesome kickstand case that they had for the GSIII:
Aduro Case
And no, it doesn't add much bulk at all.
baymon said:
I've been using it for about a week now, and haven't regretted that decision. It's definitely a must if you're using your N2 a lot with single hand. I'm still waiting for Aduro case to release their awesome kickstand case that they had for the GSIII:
Aduro Case
And no, it doesn't add much bulk at all.
Click to expand...
Click to collapse
The Aduro case looks pretty neat. I might hold off to get one. Is it going to be as cheap like for the GS3? Around $15?
Man that fly grips looks pretty cool anybody get one yet? Its kind of cool how the CEO makes his own youtube video and enter acts with the customers. I just ordered one yesterday and got my shipping confirmation today. I think it will be a great addition to the GN2.
Sent from my GT-N7100 using xda premium
jawain said:
Man that fly grips looks pretty cool anybody get one yet? Its kind of cool how the CEO makes his own youtube video and enter acts with the customers. I just ordered one yesterday and got my shipping confirmation today. I think it will be a great addition to the GN2.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
I would love to hear from you! I need someone to convince me into getting this, its just that $30 doesnt seem to worth it...
I've been on the fence with this since i saw a video review of these a few weeks ago. I am horrible about ordering things online. I search the heck out of them and then never buy anything. I really like to see things in person.
I really like the idea though. Seems like it would really make the phone more comfortable for me. I have the flip cover and i usually have one finger between it and the back of my phone which gives me a pretty secure grip but after a few minutes my poor finger starts to feel smashed back there.
Maybe i should just break down and go for it. I could use the free case for testing the mod for using a tpu case with the flip cover.
So indecisive....
Sent from my Awesome Ginormous Note 2
planetbeen said:
I've been on the fence with this since i saw a video review of these a few weeks ago. I am horrible about ordering things online. I search the heck out of them and then never buy anything. I really like to see things in person.
I really like the idea though. Seems like it would really make the phone more comfortable for me. I have the flip cover and i usually have one finger between it and the back of my phone which gives me a pretty secure grip but after a few minutes my poor finger starts to feel smashed back there.
Maybe i should just break down and go for it. I could use the free case for testing the mod for using a tpu case with the flip cover.
So indecisive....
Sent from my Awesome Ginormous Note 2
Click to expand...
Click to collapse
Ha I felt the same way I also have the flip cover as well and thought I would give ut a shot. I needed a TPU case I have a white note so bought the white clip I figured I will look really nice on the phone once I get it I will pist some pics up and let you guys know what I think. For 29 bucks for a clip I better like it lol
Sent from my GT-N7100 using xda premium
prohackas said:
I am surprised no one has posted about this as of yet.
QBKing77's youtube channel has a video review of this "contraption".
Currently there is a deal where you get a free TPU case (i think thats what it is called) with the purchase of a $30 FlyGrip.
He also mentions how you get a discount by using his name at the checkout.
I am almost convinced to get one, but would like your input on this.
Check out this video where he discusses the flygrip (somewhere in there).
Click to expand...
Click to collapse
Surprised you didn't sesrch
http://forum.xda-developers.com/showthread.php?t=1952471&highlight=flygrip
Too bad they had super expensive shipping to Sweden
Sent from a big Note 2
I got one. The guy is real easy to deal with. I had to swap mine from white to black since Tmobile had no white Note2s. He did it without issue. I carried my phone for a week w/o the clip and now about a week with the clip. I find its a nice bonus. I mostly use it when I'm relaxing and holding the phone at odd angles. Its great for that, very secure. In day to day use I don't really use it since my TPU case has really good grip already.
I had my phone for almost a week before I got my flygrip. In my opinion it makes the phone much easier to use one handed. I have maybe slightly above average hands and I can reach the whole screen easier with it. The stand feature is very nice too. I have mine on a body glove and feel extremely confident I have a very secure grip on my phone when using it. Weird angle gripping is much easier as well. I would recommend one for the GNII 100%
Regurgitated From My Giant Note II
What time curious about is how easy it is to transfer between cases or devices. I saw a video of somebody removing the FlyGrip and it looked to be some super adhesive material.
How resuable is it exactly?
Edit: Took a closer look and looks like you could grab a pack of 3 replacement adhesives. Was really excited for it despite the price since you could say it's justified with the TPU case throw in....but unfortunately the shipping code "QBKING77" is limited only to the States. Really disappointed since I'll have to pass just based on the shipping costs.
Sent from my GT-I9100M
I had one on my Sensation, and am awaiting new adhesive, but I LOVE my Flygrip. Thing is simply amazing. I didn't think that I would get 30 bucks worth out of thin cheap plastic, but I've been sorely tempted to pickup a second one for my tablet. Also, they have pretty good customer support, I've called three times, and it's always the same guy that answers. I actually prefer this to the kickstand cases because of the one handed grip support. I can't text on my bike without it, especially with this phone. I'll upload a couple pictures as soon as I get my sticky backs
---------- Post added at 11:14 PM ---------- Previous post was at 11:10 PM ----------
Xelstyle said:
What time curious about is how easy it is to transfer between cases or devices. I saw a video of somebody removing the FlyGrip and it looked to be some super adhesive material.
How resuable is it exactly?
Edit: Took a closer look and looks like you could grab a pack of 3 replacement adhesives. Was really excited for it despite the price since you could say it's justified with the TPU case throw in....but unfortunately the shipping code "QBKING77" is limited only to the States. Really disappointed since I'll have to pass just based on the shipping costs.
Sent from my GT-I9100M
Click to expand...
Click to collapse
I just took mine off of my Sensation, and it wasn't as bad as I thought it was going to be. It took some forcing to actually begin to remove it, as it is really pretty damn strong, but once I got it separated from the old case it was simple enough to just rub the remaining residue away. It does leave a very clean rectangle on whatever case you put it on after removal lol.
Xelstyle said:
really excited for it despite the price since you could say it's justified with the TPU case throw in....but unfortunately the shipping code "QBKING77" is limited only to the States. Really disappointed since I'll have to pass just based on the shipping costs.
Sent from my GT-I9100M
Click to expand...
Click to collapse
The same for me also 29$ for the product and 25$ for shipping, expensive shipping
Sent from my iPad using Tapatalk HD
So emailed FlyGrip with some questions. Response was very quick, not to mention a nice surprise with the great customer service!
" .... Additional tape provided”, are there extra adhesive tapes in each FlyGrip package? Or that we would have to buy the pack of 3 if we were interested in replacements?
Click to expand...
Click to collapse
Flygrip comes with (1) extra adhesive. So after you remove it, you can put the new adhesive on.* "Some" people try using the existing adhesive.* It depends on how sticky it still is.* We recommend to use a new one, but sometimes the adhesive is sticky enough to reuse.* We sell (3) packs for $2.47.
*
Also, a shot in the dark but I'm wondering if you do happen to have any promotions going on for international shipping (namely to Canada) as the FlyGrip was something I was immediately excited for, only to see the cost of shipping.
Click to expand...
Click to collapse
I asked my manager. You can USE "INTL5" as a code, to receive $5 off shipping.
------
Tl;dr Each FlyGrip has one extra adhesive, and use INTL5 for $5 off international shipping.
Sent from my GT-I9100M
Looks great but $30 is a lot for what it is. I'll wait for the cheap eBay HK version
Love my FlyGrip. I enjoy knowing I'm not going to drop the phone, but I really purchased it because I'm an ex-EVO user and knew I'd miss the kickstand. I use it as a kickstand whenever the phone isn't in my pocket. Right now I'm using the free case that was included, but I'll take it off in a few weeks. I usually don't go for bold colors, but got the blue kickstand and a royal blue case. Nice looking.
He has lots of videos on the site to help with making a decision. Oh, no, it doesn't add bulk, it's only 1/4" deep. USA made and the packaging is very good looking, would make a great gift.
I think it's a smarter decision to look at these.
Amazon Wisefinger Options
Much cheaper, and they look more versatile.

Has anyone got any of these generic dot view cases?

Are they good? They're even advertised as "Genuine" for $7~8, but without the HTC logo at front / back.
Ebay link
Note: Yes, we know that not everybody likes the dot view case.
200
lsv-1 said:
Are they good? They're even advertised as "Genuine" for $7~8, but without the HTC logo at front / back.
Ebay link
Note: Yes, we know that not everybody likes the dot view case.
Click to expand...
Click to collapse
Here's the one with the HTC logo for a few bucks more.
Personally, I think it's the same exact piece of plastic. One just has a logo and a steeper price.
http://www.ebay.com/itm/HTC-DOT-VIEW-CASE-COVER-FOR-NEW-HTC-ONE-M8-HC-M100-GENUINE-OFFICIAL-/221503424128?pt=US_Cell_Phone_PDA_Cases&var=&hash=item3392a20680"]Check this out
ImSt00pid said:
Here's the one with the HTC logo for a few bucks more.
Personally, I think it's the same exact piece of plastic. One just has a logo and a steeper price.
http://www.ebay.com/itm/HTC-DOT-VIEW-CASE-COVER-FOR-NEW-HTC-ONE-M8-HC-M100-GENUINE-OFFICIAL-/221503424128?pt=US_Cell_Phone_PDA_Cases&var=&hash=item3392a20680"]Check this out
Click to expand...
Click to collapse
yea i would stay away from the unbranded ones i had the normal one but it wouldnt close all the way because ive got a glass screen protector so i ended up returning it and getting an otter
ImSt00pid said:
Here's the one with the HTC logo for a few bucks more.
Personally, I think it's the same exact piece of plastic. One just has a logo and a steeper price.
http://www.ebay.com/itm/HTC-DOT-VIEW-CASE-COVER-FOR-NEW-HTC-ONE-M8-HC-M100-GENUINE-OFFICIAL-/221503424128?pt=US_Cell_Phone_PDA_Cases&var=&hash=item3392a20680"]Check this out
Click to expand...
Click to collapse
Guess what bro, those aren't genuine either even if they say so. If you look at the pics you'll notice that some don't have the htc logo
I have the genuine gray, I bought it when I've got the phone, but I'm curious about the quality of the ones they're selling for $8, that's it.
To be honest they look exactly the same but I would like a closer look. Sellers in Amazon claim that they're identical to the genuine with the exception of the logo.
Bierce22 said:
yea i would stay away from the unbranded ones i had the normal one but it wouldnt close all the way because ive got a glass screen protector so i ended up returning it and getting an otter
Click to expand...
Click to collapse
I always stay away from unbranded stuff, but these called my attention because they look identical and there are more colors available
Don't put a 10cent case on a $600 phone.....spend the money on a genuine case.
Sent from my SM-P600 using XDA Premium HD app
Weirdly I got one on eBay for about 9$ sold as authentic and I figured why not get one to check out how much I like it and it was HTC branded. Although that could be faked.
Sent from my HTC One_M8 using
I had an original dot view case that I purchased the week the M8 came out. I accidentally ripped the front from the back trying to stretch it to go over my glass screen protector. Back in July I purchased this one, http://www.ebay.com/itm/291190318285.
It doesn't say HTC and obviously an overseas knockoff. In my opinion it's much, much nicer than the OEM version. It will flip open all the way back easily and isn't near as springy. It also works with my .3mm glass screen protector, http://www.aliexpress.com/snapshot/6100440084.html.
henderjr said:
I had an original dot view case that I purchased the week the M8 came out. I accidentally ripped the front from the back trying to stretch it to go over my glass screen protector. Back in July I purchased this one, http://www.ebay.com/itm/291190318285.
It doesn't say HTC and obviously an overseas knockoff. In my opinion it's much, much nicer than the OEM version. It will flip open all the way back easily and isn't near as springy. It also works with my .3mm glass screen protector, http://www.aliexpress.com/snapshot/6100440084.html.
Click to expand...
Click to collapse
They are the same in quality! :good: That's what I thought.
bandjosh said:
Weirdly I got one on eBay for about 9$ sold as authentic and I figured why not get one to check out how much I like it and it was HTC branded. Although that could be faked.
Sent from my HTC One_M8 using
Click to expand...
Click to collapse
Share the link or pics please!
GalaxyNotesTx said:
Don't put a 10cent case on a $600 phone.....spend the money on a genuine case.
Sent from my SM-P600 using XDA Premium HD app
Click to expand...
Click to collapse
Don't use one of these cases for protection period. I can almost state with certainty that if you drop your phone on any kind of solid surface, it will definitely come flying out of these cases. In fact, if you clumsily open the case to fast the device will come flying out sometimes. That is in the original from Verizon. They offer some screen protection while in pockets or bags, but little to no drop protection & even in bags, the top & bottom of the device is not protected from scratches.
It was a little more than I remembered but it's 13$ http://www.ebay.com/itm/221503424128?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
The pictures are of mine.
Beyond that I agree with the post above mine, the dot view case is very functional as an accessory but as a protector it's useless it pops out so easily.
Sent from my HTC One_M8
I ordered this one last night and hope to see it in the mail sometime next week.
http://www.ebay.com/itm/12142505686...49&var=420362064890&ssPageName=STRK:MEBIDX:IT
And I also agree with the two previous posts. I bout the official case back in June and two weeks ago, it fell on a carpeted space and the phone flew out of it as well as the corners that secure the phone popping off. Since I enjoyed the functionality of the case, I ordered the above since spending $40.00 for something HTC will not stand behind (I tried to get them to replace it but was told they would not) was not something I was willing to do again.
I will report back pnce I get it.
I had the fake one with logo and the real deal case I got from a Verizon store. Felt the fake with the logo was just as good. So went to return the real deal case at Verizon. Turns out I mistakenly packaged the fake one and returned that one to Verizon(honest mistake). I had no idea until later when I took my One out of my csndyshell case and popped it in the dot view....So while I didn't mean to do that, I ended up with the real deal case. But honestly the fake one closed better than the real one. That is how close they are.
I'm on the Dot View case fence. I really like the concept but the reviews I've read have kept me from picking one up. Does the flap "loosen up" for lack of a better term after using it over time. What I mean is when open and flipped to the back does it start loosing it's springness that people complain about. I like hearing that the generic's seem just as good as the one from htc. I may just have to pick one up at the lower price.
I had an authentic one, and then recently bought one of those non-authentic ones.
As a direct comparison, they both look the same, but the quality is different. particularly, the dots' translucent level is very uneven, so you'll get random brighter vs darker patches
on the authentic one, all dots have consistent translucency
OME or Knock-off, I wish that someone would come out with one that snaps on decently (even if it used double-sided tape) and maybe wrapped in leather. The plastic makes the phone feel so cheap! I had the original. I have since misplaced it since I got a cheap otterbox knock off for now. Does the job, but I do miss the DotView for the cool factor.
theandies said:
I'm on the Dot View case fence. I really like the concept but the reviews I've read have kept me from picking one up. Does the flap "loosen up" for lack of a better term after using it over time. What I mean is when open and flipped to the back does it start loosing it's springness that people complain about. I like hearing that the generic's seem just as good as the one from htc. I may just have to pick one up at the lower price.
Click to expand...
Click to collapse
I have an OEM Dot View case and love it. I spent about $15 for it on Amazon. HTC also updated Dot View to add more functionality. And I was surprised yesterday by the Halloween animations. I'm very impressed by it and glad I got it.
SoI received my case today in the mail and here are my findings:
1. The case closes just as well as the OEM one I had.
2. The plastic case itself feels a bit thinner that the OEM one but I like that since I felt the OEM one was a bit too thick and added bulk to the phone.
The "Seams are not as smooth as the OEM but I am going to try and use a nail file and see if I can't fix that my self
4. The "Springiness" of the hinge that is in the OEM is not present in this case as it was in the OEM
5. The cover does not lay flat on the back of the case when opened all the way but I think that is just due to the design of the case.
6. The case seeme to snap onto the phone as well as the OEM case did.
To me, the $8.00 I spent on this case is totally worth it. As a matter of fact, I might order myself a second one to have different colors to chose from. If you think about it, for the price of one OEM you can get 6 of these in different colors and still have $2 and change left over!
I posted some pics of the case but it's hard to see any details.
Hope this helps you guys make a choice.
RonMac said:
I ordered this one last night and hope to see it in the mail sometime next week.
http://www.ebay.com/itm/12142505686...49&var=420362064890&ssPageName=STRK:MEBIDX:IT
And I also agree with the two previous posts. I bout the official case back in June and two weeks ago, it fell on a carpeted space and the phone flew out of it as well as the corners that secure the phone popping off. Since I enjoyed the functionality of the case, I ordered the above since spending $40.00 for something HTC will not stand behind (I tried to get them to replace it but was told they would not) was not something I was willing to do again.
I will report back pnce I get it.
Click to expand...
Click to collapse

Categories

Resources